Linus Torvalds [Sun, 27 May 2018 16:27:27 +0000 (09:27 -0700)]
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- enable '-fno-tree-loop-im' only when supported
- add '-fno-PIE' option before the asm-goto test
* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: disable PIE before testing asm goto
kbuild: gcov: enable -fno-tree-loop-im if supported
Linus Torvalds [Sat, 26 May 2018 20:24:16 +0000 (13:24 -0700)]
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 store buffer fixes from Thomas Gleixner:
"Two fixes for the SSBD mitigation code:
- expose SSBD properly to guests. This got broken when the CPU
feature flags got reshuffled.
- simplify the CPU detection logic to avoid duplicate entries in the
tables"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Simplify the CPU bug detection logic
KVM/VMX: Expose SSBD properly to guests
Linus Walleij [Sat, 26 May 2018 16:37:34 +0000 (18:37 +0200)]
ARM: Fix i2c-gpio GPIO descriptor tables
I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".
But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...
Fix the offending instances in the ARM tree. Sorry for the
mess.
Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Simon Guinot <simon.guinot@sequanux.org> Reported-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 26 May 2018 03:24:28 +0000 (20:24 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
In commit c7753208a94c ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added. Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:
init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]
Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix this by sanitizing *resource* before using it to index
current->signal->rlim
Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Cameron [Fri, 25 May 2018 21:47:53 +0000 (14:47 -0700)]
mm/memory_hotplug: fix leftover use of struct page during hotplug
The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug. In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.
Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.
Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.
The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.
It came up whilst testing some arm64 hotplug patches, but appears to be
universal. Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.
These patches call __add_pages (where most of the issue was fixed by
Pavel's patch). If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false. Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...
Exact path to the problem is as follows:
mm/memory_hotplug.c: add_memory_resource()
The node is not online so we enter the 'if (new_node)' twice, on the
second such block there is a call to link_mem_sections which calls
into
drivers/node.c: link_mem_sections() which calls
drivers/node.c: register_mem_sect_under_node() which calls
get_nid_for_pfn and keeps trying until the output of that matches
the expected node (passed all the way down from
add_memory_resource)
It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time). (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).
Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com Fixes: fc44f7f9231a ("mm/memory_hotplug: don't read nid from struct page during hotplug") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
so we do not insist on allocating from the given node (it is more a
hint) so we can fall back to any other populated node and moreover we
explicitly ask to not warn for the allocation failure.
Soften the warning only to cases when somebody asks for the given node
explicitly by __GFP_THISNODE.
Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Oscar Salvador <osalvador@techadventures.net> Tested-by: Oscar Salvador <osalvador@techadventures.net> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 25 May 2018 21:47:42 +0000 (14:47 -0700)]
mm, memory_hotplug: make has_unmovable_pages more robust
Oscar has reported:
: Due to an unfortunate setting with movablecore, memblocks containing bootmem
: memory (pages marked by get_page_bootmem()) ended up marked in zone_movable.
: So while trying to remove that memory, the system failed in do_migrate_range
: and __offline_pages never returned.
:
: This can be reproduced by running
: qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M
: and movablecore=4G kernel command line
:
: linux kernel: BIOS-provided physical RAM map:
: linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
: linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
: linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
: linux kernel: NX (Execute Disable) protection: active
: linux kernel: SMBIOS 2.8 present.
: linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org
: linux kernel: Hypervisor detected: KVM
: linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
: linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
:
: linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0
: linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
: linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug
: linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0
: linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0
: linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff]
: linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff]
:
: zoneinfo shows that the zone movable is placed into both numa nodes:
: Node 0, zone Movable
: pages free 160140
: min 1823
: low 2278
: high 2733
: spanned 262144
: present 262144
: managed 245670
: Node 1, zone Movable
: pages free 448427
: min 3827
: low 4783
: high 5739
: spanned 524288
: present 524288
: managed 515766
Note how only Node 0 has a hutplugable memory region which would rule it
out from the early memblock allocations (most likely memmap). Node1
will surely contain memmaps on the same node and those would prevent
offlining to succeed. So this is arguably a configuration issue.
Although one could argue that we should be more clever and rule early
allocations from the zone movable. This would be correct but probably
not worth the effort considering what a hack movablecore is.
Anyway, We could do better for those cases though. We rely on
start_isolate_page_range resp. has_unmovable_pages to do their job.
The first one isolates the whole range to be offlined so that we do not
allocate from it anymore and the later makes sure we are not stumbling
over non-migrateable pages.
has_unmovable_pages is overly optimistic, however. It doesn't check all
the pages if we are withing zone_movable because we rely that those
pages will be always migrateable. As it turns out we are still not
perfect there. While bootmem pages in zonemovable sound like a clear
bug which should be fixed let's remove the optimization for now and warn
if we encounter unmovable pages in zone_movable in the meantime. That
should help for now at least.
Btw. this wasn't a real problem until commit 72b39cfc4d75 ("mm,
memory_hotplug: do not fail offlining too early") because we used to
have a small number of retries and then failed. This turned out to be
too fragile though.
Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Oscar Salvador <osalvador@techadventures.net> Tested-by: Oscar Salvador <osalvador@techadventures.net> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Fri, 25 May 2018 21:47:38 +0000 (14:47 -0700)]
mm/kasan: don't vfree() nonexistent vm_area
KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process. Attempt to offline memory onlined by
normal boot process leads to this:
Trying to vfree() nonexistent vm area (000000005d3b34b9)
WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190
Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc(). Use find_vm_area() to see if we can call vfree().
Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it. If memory will come
online again that shadow will be reused.
Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?
vfree() is able to free any address returned by
__vmalloc_node_range(). And __vmalloc_node_range() gives you any
address you ask. It doesn't have to be an address in [VMALLOC_START,
VMALLOC_END] range.
That's also how the module_alloc()/module_memfree() works on
architectures that have designated area for modules.
[aryabinin@virtuozzo.com: improve comments] Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com
[akpm@linux-foundation.org: fix typos, reflow comment] Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 25 May 2018 21:47:35 +0000 (14:47 -0700)]
MAINTAINERS: change hugetlbfs maintainer and update files
The current hugetlbfs maintainer has not been active for more than a few
years. I have been been active in this area for more than two years and
plan to remain active in the foreseeable future.
Also, update the hugetlbfs entry to include linux-mm mail list and
additional hugetlbfs related files. hugetlb.c and hugetlb.h are not
100% hugetlbfs, but a majority of their content is hugetlbfs related.
Link: http://lkml.kernel.org/r/20180518225236.19079-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Fri, 25 May 2018 21:47:30 +0000 (14:47 -0700)]
ipc/shm: fix shmat() nil address after round-down when remapping
shmat()'s SHM_REMAP option forbids passing a nil address for; this is in
fact the very first thing we check for. Andrea reported that for
SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check,
but we need to check again if the address was rounded down to nil. As
of this patch, such cases will return -EINVAL.
Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805 Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "ipc/shm: shmat() fixes around nil-page".
These patches fix two issues reported[1] a while back by Joe and Andrea
around how shmat(2) behaves with nil-page.
The first reverts a commit that it was incorrectly thought that mapping
nil-page (address=0) was a no no with MAP_FIXED. This is not the case,
with the exception of SHM_REMAP; which is address in the second patch.
I chose two patches because it is easier to backport and it explicitly
reverts bogus behaviour. Both patches ought to be in -stable and ltp
testcases need updated (the added testcase around the cve can be
modified to just test for SHM_RND|SHM_REMAP).
Commit 95e91b831f87 ("ipc/shm: Fix shmat mmap nil-page protection")
worked on the idea that we should not be mapping as root addr=0 and
MAP_FIXED. However, it was reported that this scenario is in fact
valid, thus making the patch both bogus and breaks userspace as well.
For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem
initialization[1].
[1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347 Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net Fixes: 95e91b831f87 ("ipc/shm: Fix shmat mmap nil-page protection") Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Fri, 25 May 2018 21:47:24 +0000 (14:47 -0700)]
idr: fix invalid ptr dereference on item delete
If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen. This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.
Roman said:
The syzcaller test boils down to opening /dev/kvm, creating an
eventfd, and calling a couple of KVM ioctls. None of this requires
superuser. And the result is dereferencing an uninitialized pointer
which is likely a crash. The specific path caught by syzbot is via
KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
other user-triggerable paths, so cc:stable is probably justified.
Matthew added:
We have around 250 calls to idr_remove() in the kernel today. Many of
them pass an ID which is embedded in the object they're removing, so
they're safe. Picking a few likely candidates:
drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
drivers/atm/nicstar.c could be taken down by a handcrafted packet
Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree") Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com> Debugged-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Omar Sandoval [Fri, 25 May 2018 21:47:17 +0000 (14:47 -0700)]
mm: fix nr_rotate_swap leak in swapon() error case
If swapon() fails after incrementing nr_rotate_swap, we don't decrement
it and thus effectively leak it. Make sure we decrement it if we
incremented it.
Link: http://lkml.kernel.org/r/b6fe6b879f17fa68eee6cbd876f459f6e5e33495.1526491581.git.osandov@fb.com Fixes: 81a0298bdfab ("mm, swap: don't use VMA based swap readahead if HDD is used as swap") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Fri, 25 May 2018 22:00:26 +0000 (15:00 -0700)]
Merge tag 'qcom-fixes-for-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Qualcomm Fixes for 4.17-rc7
* Fix crash in qcom_scm_call_atomic1()
* tag 'qcom-fixes-for-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
Thomas Falcon [Thu, 24 May 2018 19:37:53 +0000 (14:37 -0500)]
ibmvnic: Fix partial success login retries
In its current state, the driver will handle backing device
login in a loop for a certain number of retries while the
device returns a partial success, indicating that the driver
may need to try again using a smaller number of resources.
The variable it checks to continue retrying may change
over the course of operations, resulting in reallocation
of resources but exits without sending the login attempt.
Guard against this by introducing a boolean variable that
will retain the state indicating that the driver needs to
reattempt login with backing device firmware.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a bug in the original fix to prevent out of bounds speculation when
multiple tail call maps from different branches or calls end up at the
same tail call helper invocation, from Daniel.
2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
case of missing numa support and another one to update kernel config to
properly support xdp_meta.sh test, from Anders.
...
Would be great if you have a chance to merge net into net-next after that.
The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa50662fb ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Radim Krčmář [Thu, 24 May 2018 15:50:56 +0000 (17:50 +0200)]
KVM: x86: fix #UD address of failed Hyper-V hypercalls
If the hypercall was called from userspace or real mode, KVM injects #UD
and then advances RIP, so it looks like #UD was caused by the following
instruction. This probably won't cause more than confusion, but could
give an unexpected access to guest OS' instruction emulator.
Also, refactor the code to count hv hypercalls that were handled by the
virt userspace.
Fixes: 6356ee0c9602 ("x86: Delay skip of emulated hypercall instruction") Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Linus Torvalds [Fri, 25 May 2018 16:35:11 +0000 (09:35 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 fixes from Will Deacon:
- fix application of read-only permissions to kernel section mappings
- sanitise reported ESR values for signals delivered on a kernel
address
- ensure tishift GCC helpers are exported to modules
- fix inline asm constraints for some LSE atomics
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Make sure permission updates happen for pmd/pud
arm64: fault: Don't leak data in ESR context for user fault on kernel VA
arm64: export tishift functions to modules
arm64: lse: Add early clobbers to some input/output asm operands
Linus Torvalds [Fri, 25 May 2018 16:32:00 +0000 (09:32 -0700)]
Merge tag 'powerpc-4.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, to make sure the PCR (Processor Compatibility Register)
is reset on boot.
Otherwise if we're running in compat mode in a guest (eg. pretending a
Power9 is a Power8) and the host kernel oopses and kdumps then the
kdump kernel's userspace will be running in Power8 mode, and will
SIGILL if it uses Power9-only instructions.
Thanks to Michael Neuling"
* tag 'powerpc-4.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Clear PCR on boot
Linus Torvalds [Fri, 25 May 2018 16:29:17 +0000 (09:29 -0700)]
Merge tag 'mmc-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Propagate correct error code for RPMB requests
MMC host:
- sdhci-iproc: Drop hard coded cap for 1.8v
- sdhci-iproc: Fix 32bit writes for transfer mode
- sdhci-iproc: Enable SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus"
* tag 'mmc-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
mmc: block: propagate correct returned value in mmc_rpmb_ioctl
Qing Huang [Wed, 23 May 2018 23:22:46 +0000 (16:22 -0700)]
mlx4_core: allocate ICM memory in page size chunks
When a system is under memory presure (high usage with fragments),
the original 256KB ICM chunk allocations will likely trigger kernel
memory management to enter slow path doing memory compact/migration
ops in order to complete high order memory allocations.
When that happens, user processes calling uverb APIs may get stuck
for more than 120s easily even though there are a lot of free pages
in smaller chunks available in the system.
Syslog:
...
Dec 10 09:04:51 slcc03db02 kernel: [397078.572732] INFO: task
oracle_205573_e:205573 blocked for more than 120 seconds.
...
With 4KB ICM chunk size on x86_64 arch, the above issue is fixed.
However in order to support smaller ICM chunk size, we need to fix
another issue in large size kcalloc allocations.
E.g.
Setting log_num_mtt=30 requires 1G mtt entries. With the 4KB ICM chunk
size, each ICM chunk can only hold 512 mtt entries (8 bytes for each mtt
entry). So we need a 16MB allocation for a table->icm pointer array to
hold 2M pointers which can easily cause kcalloc to fail.
The solution is to use kvzalloc to replace kcalloc which will fall back
to vmalloc automatically if kmalloc fails.
Signed-off-by: Qing Huang <qing.huang@oracle.com> Acked-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
added a WARN() in the case where we call kthread_park() on an already
parked thread, because the old code wasn't doing the right thing there
and it wasn't at all clear that would happen.
It turns out, this does in fact happen, so we have to deal with it.
Instead of potentially returning early, also wait for the completion.
This does however mean we have to use complete_all() and re-initialize
the completion on re-use.
Reported-by: LKP <lkp@01.org> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel test robot <lkp@intel.com> Cc: wfg@linux.intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") Link: http://lkml.kernel.org/r/20180504091142.GI12235@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
When scheduler debug is enabled, building scheduling domains outputs
information about how the domains are laid out and to which root domain
each CPU (or sets of CPUs) belongs, e.g.:
The fact that latest line refers to CPUs 0-5 root domain doesn't however look
immediately obvious to me: one might wonder why span 0-5 is reported "again".
Make it more clear by adding "root domain" to it, as to end with the
following:
Since the first ldr is successful, and since r12 isn't explicitly
modified by any instruction between the first and the second ldr,
it must have been modified by the smc call, which is ok,
since r12 is caller save according to the AAPCS.
Add r12 to the clobber list so that the compiler knows that the
callee potentially overwrites the value in r12.
Clobber descriptions may not in any way overlap with an input or
output operand.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then
failover to DMA") DMA mask was changed from 40 bits to 64 bits.
Hardware actually supports only 47 bits.
Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Biggers [Wed, 23 May 2018 21:37:38 +0000 (14:37 -0700)]
ppp: remove the PPPIOCDETACH ioctl
The PPPIOCDETACH ioctl effectively tries to "close" the given ppp file
before f_count has reached 0, which is fundamentally a bad idea. It
does check 'f_count < 2', which excludes concurrent operations on the
file since they would only be possible with a shared fd table, in which
case each fdget() would take a file reference. However, it fails to
account for the fact that even with 'f_count == 1' the file can still be
linked into epoll instances. As reported by syzbot, this can trivially
be used to cause a use-after-free.
Yet, the only known user of PPPIOCDETACH is pppd versions older than
ppp-2.4.2, which was released almost 15 years ago (November 2003).
Also, PPPIOCDETACH apparently stopped working reliably at around the
same time, when the f_count check was added to the kernel, e.g. see
https://lkml.org/lkml/2002/12/31/83. Also, the current 'f_count < 2'
check makes PPPIOCDETACH only work in single-threaded applications; it
always fails if called from a multithreaded application.
All pppd versions released in the last 15 years just close() the file
descriptor instead.
Therefore, instead of hacking around this bug by exporting epoll
internals to modules, and probably missing other related bugs, just
remove the PPPIOCDETACH ioctl and see if anyone actually notices. Leave
a stub in place that prints a one-time warning and returns EINVAL.
Reported-by: syzbot+16363c99d4134717c05b@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 23 May 2018 18:29:52 +0000 (14:29 -0400)]
ipv4: remove warning in ip_recv_error
A precondition check in ip_recv_error triggered on an otherwise benign
race. Remove the warning.
The warning triggers when passing an ipv6 socket to this ipv4 error
handling function. RaceFuzzer was able to trigger it due to a race
in setsockopt IPV6_ADDRFORM.
This socket option converts a v6 socket that is connected to a v4 peer
to an v4 socket. It updates the socket on the fly, changing fields in
sk as well as other structs. This is inherently non-atomic. It races
with the lockless udp_recvmsg path.
No other code makes an assumption that these fields are updated
atomically. It is benign here, too, as ip_recv_error cares only about
the protocol of the skbs enqueued on the error queue, for which
sk_family is not a precise predictor (thanks to another isue with
IPV6_ADDRFORM).
Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr Fixes: 7ce875e5ecb8 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error") Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Wed, 23 May 2018 16:24:48 +0000 (19:24 +0300)]
net : sched: cls_api: deal with egdev path only if needed
When dealing with ingress rule on a netdev, if we did fine through the
conventional path, there's no need to continue into the egdev route,
and we can stop right there.
Not doing so may cause a 2nd rule to be added by the cls api layer
with the ingress being the egdev.
For example, under sriov switchdev scheme, a user rule of VFR A --> VFR B
will end up with two HW rules (1) VF A --> VF B and (2) uplink --> VF B
Fixes: 208c0f4b5237 ('net: sched: use tc_setup_cb_call to call per-block callbacks') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 11:58:57 +0000 (19:58 +0800)]
vhost: synchronize IOTLB message with dev cleanup
DaeRyong Jeong reports a race between vhost_dev_cleanup() and
vhost_process_iotlb_msg():
Thread interleaving:
CPU0 (vhost_process_iotlb_msg) CPU1 (vhost_dev_cleanup)
(In the case of both VHOST_IOTLB_UPDATE and
VHOST_IOTLB_INVALIDATE)
===== =====
vhost_umem_clean(dev->iotlb);
if (!dev->iotlb) {
ret = -EFAULT;
break;
}
dev->iotlb = NULL;
The reason is we don't synchronize between them, fixing by protecting
vhost_process_iotlb_msg() with dev mutex.
Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 24 May 2018 22:10:30 +0000 (18:10 -0400)]
packet: fix reserve calculation
Commit b84bbaf7a6c8 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.
This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.
The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.
Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.
Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation") Reported-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Thu, 24 May 2018 23:47:56 +0000 (09:47 +1000)]
Merge branch 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Three fixes for vmwgfx. Two are cc'd stable and fix host logging and its
error paths on 32-bit VMs. One is a fix for a hibernate flaw
introduced with the 4.17 merge window.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Schedule an fb dirty update after resume
drm/vmwgfx: Fix host logging / guestinfo reading error paths
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
Linus Torvalds [Thu, 24 May 2018 21:42:43 +0000 (14:42 -0700)]
Merge branch 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"One single fix in here: under Xen the DMA32 heap (in the hypervisor)
would end up looking like swiss cheese.
The reason being that for every coherent DMA allocation we didn't do
the proper hypercall to tell Xen to return the page back to the DMA32
heap. End result was (eventually) no DMA32 space if you (for example)
continously unloaded and loaded modules"
* 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
Yossi Kuperman [Tue, 17 Oct 2017 17:39:17 +0000 (20:39 +0300)]
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
Sandbox QP Commands are retired in the order they are sent. Outstanding
commands are stored in a linked-list in the order they appear. Once a
response is received and the callback gets called, we pull the first
element off the pending list, assuming they correspond.
Sending a message and adding it to the pending list is not done atomically,
hence there is an opportunity for a race between concurrent requests.
Eran Ben Elisha [Tue, 1 May 2018 13:25:07 +0000 (16:25 +0300)]
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
When RXFCS feature is enabled, the HW do not strip the FCS data,
however it is not present in the checksum calculated by the HW.
Fix that by manually calculating the FCS checksum and adding it to the SKB
checksum field.
Add helper function to find the FCS data for all SKB forms (linear,
one fragment or more).
Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Linus Torvalds [Thu, 24 May 2018 21:12:05 +0000 (14:12 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is pretty much just the usual array of smallish driver bugs.
- remove bouncing addresses from the MAINTAINERS file
- kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and
hns drivers
- various small LOC behavioral/operational bugs in mlx5, hns, qedr
and i40iw drivers
- two fixes for patches already sent during the merge window
- a long-standing bug related to not decreasing the pinned pages
count in the right MM was found and fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/hns: Move the location for initializing tmp_len
RDMA/hns: Bugfix for cq record db for kernel
IB/uverbs: Fix uverbs_attr_get_obj
RDMA/qedr: Fix doorbell bar mapping for dpi > 1
IB/umem: Use the correct mm during ib_umem_release
iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
RDMA/i40iw: Avoid reference leaks when processing the AEQ
RDMA/i40iw: Avoid panic when objects are being created and destroyed
RDMA/hns: Fix the bug with NULL pointer
RDMA/hns: Set NULL for __internal_mr
RDMA/hns: Enable inner_pa_vld filed of mpt
RDMA/hns: Set desc_dma_addr for zero when free cmq desc
RDMA/hns: Fix the bug with rq sge
RDMA/hns: Not support qp transition from reset to reset for hip06
RDMA/hns: Add return operation when configured global param fail
RDMA/hns: Update convert function of endian format
RDMA/hns: Load the RoCE dirver automatically
RDMA/hns: Bugfix for rq record db for kernel
RDMA/hns: Add rq inline flags judgement
...
Linus Torvalds [Thu, 24 May 2018 18:47:43 +0000 (11:47 -0700)]
Merge tag 'for-4.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A one-liner that prevents leaking an internal error value 1 out of the
ftruncate syscall.
This has been observed in practice. The steps to reproduce make a
common pattern (open/write/fync/ftruncate) but also need the
application to not check only for negative values and happens only for
compressed inlined files.
The conditions are narrow but as this could break userspace I think
it's better to merge it now and not wait for the merge window"
* tag 'for-4.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix error handling in btrfs_truncate()
Lukas Wunner [Thu, 24 May 2018 17:01:07 +0000 (19:01 +0200)]
ALSA: hda - Fix runtime PM
Before commit 3b5b899ca67d ("ALSA: hda: Make use of core codec functions
to sync power state"), hda_set_power_state() returned the response to
the Get Power State verb, a 32-bit unsigned integer whose expected value
is 0x233 after transitioning a codec to D3, and 0x0 after transitioning
it to D0.
The response value is significant because hda_codec_runtime_suspend()
does not clear the codec's bit in the codec_powered bitmask unless the
AC_PWRST_CLK_STOP_OK bit (0x200) is set in the response value. That in
turn prevents the HDA controller from runtime suspending because
azx_runtime_idle() checks that the codec_powered bitmask is zero.
Since commit 3b5b899ca67d, hda_set_power_state() only returns 0x0 or
0x1, thereby breaking runtime PM for any HDA controller. That's because
an inline function introduced by the commit returns a bool instead of a
32-bit unsigned int. The change was likely erroneous and resulted from
copying and pasting snd_hda_check_power_state(), which is immediately
preceding the newly introduced inline function. Fix it.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=106597 Fixes: 3b5b899ca67d ("ALSA: hda: Make use of core codec functions to sync power state") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Abhijeet Kumar <abhijeet.kumar@intel.com> Reported-and-tested-by: Gunnar Krüger <taijian@posteo.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
bad8c6c0b114 ("mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE")
Ville reported a following error on i386.
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
microcode: microcode updated early to revision 0x4, date = 2013-06-28
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:00118000)
Initializing Movable for node 0 (00000001:00118000)
BUG: Bad page state in process swapper pfn:377fe
page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
flags: 0x80000000()
raw: 800000000000000000000000ffffff8000000000000001000000020000000001
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.0-rc5-elk+ #145
Hardware name: Dell Inc. Latitude E5410/03VXMC, BIOS A15 07/11/2013
Call Trace:
dump_stack+0x60/0x96
bad_page+0x9a/0x100
free_pages_check_bad+0x3f/0x60
free_pcppages_bulk+0x29d/0x5b0
free_unref_page_commit+0x84/0xb0
free_unref_page+0x3e/0x70
__free_pages+0x1d/0x20
free_highmem_page+0x19/0x40
add_highpages_with_active_regions+0xab/0xeb
set_highmem_pages_init+0x66/0x73
mem_init+0x1b/0x1d7
start_kernel+0x17a/0x363
i386_start_kernel+0x95/0x99
startup_32_smp+0x164/0x168
The reason for this error is that the span of MOVABLE_ZONE is extended
to whole node span for future CMA initialization, and, normal memory is
wrongly freed here. I submitted the fix and it seems to work, but,
another problem happened.
It's so late time to fix the later problem so I decide to reverting the
series.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jim Mattson [Wed, 9 May 2018 21:29:35 +0000 (14:29 -0700)]
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
If there is a possibility that a VM may migrate to a Skylake host,
then the hypervisor should report IA32_ARCH_CAPABILITIES.RSBA[bit 2]
as being set (future work, of course). This implies that
CPUID.(EAX=7,ECX=0):EDX.ARCH_CAPABILITIES[bit 29] should be
set. Therefore, kvm should report this CPUID bit as being supported
whether or not the host supports it. Userspace is still free to clear
the bit if it chooses.
For more information on RSBA, see Intel's white paper, "Retpoline: A
Branch Target Injection Mitigation" (Document Number 337131-001),
currently available at https://bugzilla.kernel.org/show_bug.cgi?id=199511.
Since the IA32_ARCH_CAPABILITIES MSR is emulated in kvm, there is no
dependency on hardware support for this feature.
Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 28c1c9fabf48 ("KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES") Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Linus Torvalds [Thu, 24 May 2018 16:36:16 +0000 (09:36 -0700)]
Merge branch 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Nothing too interesting. Four patches to update the blacklist and
add a controller ID"
* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: Add PCI ID for Cannon Lake PCH-LP AHCI
libata: blacklist Micron 500IT SSD with MU01 firmware
libata: Apply NOLPM quirk for SAMSUNG PM830 CXM13D1Q.
libata: Blacklist some Sandisk SSDs for NCQ
Wei Huang [Tue, 1 May 2018 14:49:54 +0000 (09:49 -0500)]
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
The CPUID bits of OSXSAVE (function=0x1) and OSPKE (func=0x7, leaf=0x0)
allows user apps to detect if OS has set CR4.OSXSAVE or CR4.PKE. KVM is
supposed to update these CPUID bits when CR4 is updated. Current KVM
code doesn't handle some special cases when updates come from emulator.
Here is one example:
Step 1: guest boots
Step 2: guest OS enables XSAVE ==> CR4.OSXSAVE=1 and CPUID.OSXSAVE=1
Step 3: guest hot reboot ==> QEMU reset CR4 to 0, but CPUID.OSXAVE==1
Step 4: guest os checks CPUID.OSXAVE, detects 1, then executes xgetbv
Step 4 above will cause an #UD and guest crash because guest OS hasn't
turned on OSXAVE yet. This patch solves the problem by comparing the the
old_cr4 with cr4. If the related bits have been changed,
kvm_update_cpuid() needs to be called.
Linus Torvalds [Thu, 24 May 2018 15:53:20 +0000 (08:53 -0700)]
Merge tag 'for-linus-20180524' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release:
- a loop writeback error clearing fix from Jeff
- the sr sense fix from myself"
* tag 'for-linus-20180524' of git://git.kernel.dk/linux-block:
loop: clear wb_err in bd_inode when detaching backing file
sr: pass down correctly sized SCSI sense buffer
Linus Torvalds [Thu, 24 May 2018 15:49:56 +0000 (08:49 -0700)]
Merge tag 'pm-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a regression from the 4.15 cycle that caused the system suspend
and resume overhead to increase on many systems and triggered more
serious problems on some of them (Rafael Wysocki)"
* tag 'pm-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / core: Fix direct_complete handling for devices with no callbacks
# bpftool m s i 5
5: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
# bpftool m s i 6
6: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
# bpftool m s i 8
8: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
# bpftool m s i 7
7: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
In both cases the index masking inserted by the verifier in order
to control out of bounds speculation from a CPU via b2157399cc98
("bpf: prevent out-of-bounds speculation") seems to be incorrect
in what it is enforcing. In the 1st variant, the mask is applied
from the map with the significantly larger number of entries where
we would allow to a certain degree out of bounds speculation for
the smaller map, and in the 2nd variant where the mask is applied
from the map with the smaller number of entries, we get buggy
behavior since we truncate the index of the larger map.
The original intent from commit b2157399cc98 is to reject such
occasions where two or more different tail call maps are used
in the same tail call helper invocation. However, the check on
the BPF_MAP_PTR_POISON is never hit since we never poisoned the
saved pointer in the first place! We do this explicitly for map
lookups but in case of tail calls we basically used the tail
call map in insn_aux_data that was processed in the most recent
path which the verifier walked. Thus any prior path that stored
a pointer in insn_aux_data at the helper location was always
overridden.
Fix it by moving the map pointer poison logic into a small helper
that covers both BPF helpers with the same logic. After that in
fixup_bpf_calls() the poison check is then hit for tail calls
and the program rejected. Latter only happens in unprivileged
case since this is the *only* occasion where a rewrite needs to
happen, and where such rewrite is specific to the map (max_entries,
index_mask). In the privileged case the rewrite is generic for
the insn->imm / insn->code update so multiple maps from different
paths can be handled just fine since all the remaining logic
happens in the instruction processing itself. This is similar
to the case of map lookups: in case there is a collision of
maps in fixup_bpf_calls() we must skip the inlined rewrite since
this will turn the generic instruction sequence into a non-
generic one. Thus the patch_call_imm will simply update the
insn->imm location where the bpf_map_lookup_elem() will later
take care of the dispatch. Given we need this 'poison' state
as a check, the information of whether a map is an unpriv_array
gets lost, so enforcing it prior to that needs an additional
state. In general this check is needed since there are some
complex and tail call intensive BPF programs out there where
LLVM tends to generate such code occasionally. We therefore
convert the map_ptr rather into map_state to store all this
w/o extra memory overhead, and the bit whether one of the maps
involved in the collision was from an unpriv_array thus needs
to be retained as well there.
David Vrabel [Fri, 18 May 2018 15:55:46 +0000 (16:55 +0100)]
x86/kvm: fix LAPIC timer drift when guest uses periodic mode
Since 4.10, commit 8003c9ae204e (KVM: LAPIC: add APIC Timer
periodic/oneshot mode VMX preemption timer support), guests using
periodic LAPIC timers (such as FreeBSD 8.4) would see their timers
drift significantly over time.
Differences in the underlying clocks and numerical errors means the
periods of the two timers (hv and sw) are not the same. This
difference will accumulate with every expiry resulting in a large
error between the hv and sw timer.
This means the sw timer may be running slow when compared to the hv
timer. When the timer is switched from hv to sw, the now active sw
timer will expire late. The guest VCPU is reentered and it switches to
using the hv timer. This timer catches up, injecting multiple IRQs
into the guest (of which the guest only sees one as it does not get to
run until the hv timer has caught up) and thus the guest's timer rate
is low (and becomes increasing slower over time as the sw timer lags
further and further behind).
I believe a similar problem would occur if the hv timer is the slower
one, but I have not observed this.
Fix this by synchronizing the deadlines for both timers to the same
time source on every tick. This prevents the errors from accumulating.
Fixes: 8003c9ae204e21204e49816c5ea629357e283b06 Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Laura Abbott [Wed, 23 May 2018 18:43:46 +0000 (11:43 -0700)]
arm64: Make sure permission updates happen for pmd/pud
Commit 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by using
pgattr_change_is_safe instead of p*d_present for determining if the
change is permitted.
Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reported-by: Peter Robinson <pbrobinson@gmail.com> Fixes: 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Omar Sandoval [Tue, 22 May 2018 16:47:58 +0000 (09:47 -0700)]
Btrfs: fix error handling in btrfs_truncate()
Jun Wu at Facebook reported that an internal service was seeing a return
value of 1 from ftruncate() on Btrfs in some cases. This is coming from
the NEED_TRUNCATE_BLOCK return value from btrfs_truncate_inode_items().
btrfs_truncate() uses two variables for error handling, ret and err.
When btrfs_truncate_inode_items() returns non-zero, we set err to the
return value. However, NEED_TRUNCATE_BLOCK is not an error. Make sure we
only set err if ret is an error (i.e., negative).
To reproduce the issue: mount a filesystem with -o compress-force=zstd
and the following program will encounter return value of 1 from
ftruncate:
int main(void) {
char buf[256] = { 0 };
int ret;
int fd;
if (fsync(fd) == -1) {
perror("fsync");
close(fd);
return EXIT_FAILURE;
}
ret = ftruncate(fd, 128);
if (ret) {
printf("ftruncate() returned %d\n", ret);
close(fd);
return EXIT_FAILURE;
}
close(fd);
return EXIT_SUCCESS;
}
Fixes: ddfae63cc8e0 ("btrfs: move btrfs_truncate_block out of trans handle") CC: stable@vger.kernel.org # 4.15+ Reported-by: Jun Wu <quark@fb.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
oulijun [Tue, 22 May 2018 12:47:15 +0000 (20:47 +0800)]
RDMA/hns: Move the location for initializing tmp_len
When posted work request, it need to compute the length of
all sges of every wr and fill it into the msg_len field of
send wqe. Thus, While posting multiple wr,
tmp_len should be reinitialized to zero.
Fixes: 8b9b8d143b46 ("RDMA/hns: Fix the endian problem for hns") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
oulijun [Tue, 22 May 2018 12:47:14 +0000 (20:47 +0800)]
RDMA/hns: Bugfix for cq record db for kernel
When use cq record db for kernel, it needs to set the hr_cq->db_en
to 1 and configure the dma address of record cq db of qp context.
Fixes: 86188a8810ed ("RDMA/hns: Support cq record doorbell for kernel space") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kalderon, Michal [Tue, 15 May 2018 12:13:33 +0000 (15:13 +0300)]
RDMA/qedr: Fix doorbell bar mapping for dpi > 1
Each user_context receives a separate dpi value and thus a different
address on the doorbell bar. The qedr_mmap function needs to validate
the address and map the doorbell bar accordingly.
The current implementation always checked against dpi=0 doorbell range
leading to a wrong mapping for doorbell bar. (It entered an else case
that mapped the address differently). qedr_mmap should only be used
for doorbells, so the else was actually wrong in the first place.
This only has an affect on arm architecture and not an issue on a
x86 based architecture.
This lead to doorbells not occurring on arm based systems and left
applications that use more than one dpi (or several applications
run simultaneously ) to hang.
Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Morgenstein [Wed, 23 May 2018 07:41:59 +0000 (10:41 +0300)]
net/mlx4: Fix irq-unsafe spinlock usage
spin_lock/unlock was used instead of spin_un/lock_irq
in a procedure used in process space, on a spinlock
which can be grabbed in an interrupt.
This caused the stack trace below to be displayed (on kernel
4.17.0-rc1 compiled with Lock Debugging enabled):
[ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I
[ 154.675856] -----------------------------------------------------
[ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core]
[ 154.700927]
and this task is already holding:
[ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib]
[ 154.718028] which would create a new lock dependency:
[ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.}
[ 154.731922]
but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 154.740798] (&(&cq->lock)->rlock){..-.}
[ 154.740800]
... which became SOFTIRQ-irq-safe at:
[ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50
[ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib]
[ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib]
...
to a SOFTIRQ-irq-unsafe lock:
[ 154.815603] (&(&qp_table->lock)->rlock){+.+.}
[ 154.815604]
... which became SOFTIRQ-irq-unsafe at:
[ 154.827718] ...
[ 154.827720] _raw_spin_lock+0x35/0x50
[ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core]
[ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core]
Since mlx4_qp_lookup() is called only in process space, we can
simply replace the spin_un/lock calls with spin_un/lock_irq calls.
Fixes: 6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 23 May 2018 00:04:49 +0000 (17:04 -0700)]
net: phy: broadcom: Fix bcm_write_exp()
On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.
Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.
broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).
Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 May 2018 23:22:26 +0000 (16:22 -0700)]
net: phy: broadcom: Fix auxiliary control register reads
We are currently doing auxiliary control register reads with the shadow
register value 0b111 (0x7) which incidentally is also the selector value
that should be present in bits [2:0]. Fix this by using the appropriate
selector mask which is defined (MII_BCM54XX_AUXCTL_SHDWSEL_MASK).
This does not have a functional impact yet because we always access the
MII_BCM54XX_AUXCTL_SHDWSEL_MISC (0x7) register in the current code.
This might change at some point though.
Fixes: 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 22 May 2018 15:42:51 +0000 (16:42 +0100)]
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
Trivial fix to spelling mistake in mlx4_dbg debug message and also
change the phrasing of the message so that is is more readable
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Tue, 22 May 2018 16:21:10 +0000 (11:21 -0500)]
ibmvnic: Only do H_EOI for mobility events
When enabling the sub-CRQ IRQ a previous update sent a H_EOI prior
to the enablement to clear any pending interrupts that may be present
across a partition migration. This fixed a firmware bug where a
migration could erroneously indicate that a H_EOI was pending.
The H_EOI should only be sent when enabling during a mobility
event though. Doing so at other time could wrong and can produce
extra driver output when IRQs are enabled when doing TX completion.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 May 2018 18:45:42 +0000 (14:45 -0400)]
Merge tag 'wireless-drivers-for-davem-2018-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.17
Hopefully the last fixes for 4.17. ssb is again causing problems so we
had to revert a commit and fix it better. Also a small fix to bcma and
some MAINTAINERS file updates.
ssb
* fix regression with all module PCI cards, for example using b43 and
b44 drivers
* try again fixing a MIPS linker error
bcma
* fix truncated info log messages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 06:21:04 +0000 (14:21 +0800)]
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
When link is down, writes to the device might fail with
-EIO. Userspace needs an indication when the status is resolved. As a
fix, tun_net_open() attempts to wake up writers - but that is only
effective if SOCKWQ_ASYNC_NOSPACE has been set in the past. This is
not the case of vhost_net which only poll for EPOLLOUT after it meets
errors during sendmsg().
This patch fixes this by making sure SOCKWQ_ASYNC_NOSPACE is set when
socket is not writable or device is down to guarantee EPOLLOUT will be
raised in either tun_chr_poll() or tun_sock_write_space() after device
is up.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Fixes: 1bd4978a88ac2 ("tun: honor IFF_UP in tun_get_user()") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 03:44:31 +0000 (11:44 +0800)]
virtio-net: fix leaking page for gso packet during mergeable XDP
We need to drop refcnt to xdp_page if we see a gso packet. Otherwise
it will be leaked. Fixing this by moving the check of gso packet above
the linearizing logic. While at it, remove useless comment as well.
Cc: John Fastabend <john.fastabend@gmail.com> Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 03:44:30 +0000 (11:44 +0800)]
virtio-net: correctly check num_buf during err path
If we successfully linearize the packet, num_buf will be set to zero
which may confuse error handling path which assumes num_buf is at
least 1 and this can lead the code tries to pop the descriptor of next
buffer. Fixing this by checking num_buf against 1 before decreasing.
Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 03:44:29 +0000 (11:44 +0800)]
virtio-net: correctly transmit XDP buff after linearizing
We should not go for the error path after successfully transmitting a
XDP buffer after linearizing. Since the error path may try to pop and
drop next packet and increase the drop counters. Fixing this by simply
drop the refcnt of original page and go for xmit path.
Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 22 May 2018 03:44:28 +0000 (11:44 +0800)]
virtio-net: correctly redirect linearized packet
After a linearized packet was redirected by XDP, we should not go for
the err path which will try to pop buffers for the next packet and
increase the drop counter. Fixing this by just drop the page refcnt
for the original page.
Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT") Reported-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 May 2018 15:50:05 +0000 (11:50 -0400)]
Merge tag 'mac80211-for-davem-2018-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* hwsim radio dump wasn't working for the first radio
* mesh was updating statistics incorrectly
* a netlink message allocation was possibly too short
* wiphy name limit was still too long
* in certain cases regdb query could find a NULL pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 23 May 2018 15:18:33 +0000 (08:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A few small changes for alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2
alpha: simplify get_arch_dma_ops
alpha: use dma_direct_ops for jensen
Thomas Hellstrom [Wed, 23 May 2018 14:14:54 +0000 (16:14 +0200)]
drm/vmwgfx: Schedule an fb dirty update after resume
We have had problems displaying fbdev after a resume and as a
workaround we have had to call vmw_fb_refresh(). This has had
a number of unwanted side-effects. The root of the problem was,
however that the coalesced fbdev dirty region was not empty on
the first dirty_mark() after a resume, so a flush was never
scheduled.
Fix this by force scheduling an fbdev flush after resume, and
remove the workaround.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
The error paths were leaking opened channels.
Fix by using dedicated error paths.
Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Depending on whether the kernel is compiled with frame-pointer or not,
the temporary memory location used for the bp parameter in these macros
is referenced relative to the stack pointer or the frame pointer.
Hence we can never reference that parameter when we've modified either
the stack pointer or the frame pointer, because then the compiler would
generate an incorrect stack reference.
Fix this by pushing the temporary memory parameter on a known location on
the stack before modifying the stack- and frame pointers.
Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Anders Roxell [Fri, 18 May 2018 22:27:37 +0000 (00:27 +0200)]
selftests: net: reuseport_bpf_numa: don't fail if no numa support
The reuseport_bpf_numa test case fails there's no numa support. The
test shouldn't fail if there's no support it should be skipped.
Fixes: 3c2c3c16aaf6 ("reuseport, bpf: add test case for bpf_get_numa_node_id") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
x86/speculation: Simplify the CPU bug detection logic
Only CPUs which speculate can speculate. Therefore, it seems prudent
to test for cpu_no_speculation first and only then determine whether
a specific speculating CPU is susceptible to store bypass speculation.
This is underlined by all CPUs currently listed in cpu_no_speculation
were present in cpu_no_spec_store_bypass as well.
The X86_FEATURE_SSBD is an synthetic CPU feature - that is
it bit location has no relevance to the real CPUID 0x7.EBX[31]
bit position. For that we need the new CPU feature name.
Fixes: 52817587e706 ("x86/cpufeatures: Disentangle SSBD enumeration") Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20180521215449.26423-2-konrad.wilk@oracle.com
Brian Norris [Wed, 23 May 2018 00:23:10 +0000 (17:23 -0700)]
mfd: cros_ec: Retry commands when EC is known to be busy
Commit 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error
signaling") pointed out some bad code, but its analysis and conclusion
was not 100% correct.
It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS
for transport errors, because this has a special meaning -- that we
should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer
busy. This is definitely the wrong thing for many commands, because
among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve
any RX data from the EC, so commands that expected some data back will
instead start processing junk.
For such commands, the right answer is to either propagate the error
(and return that error to the caller) or resend the original command
(*not* EC_CMD_GET_COMMS_STATUS).
Unfortunately, commit 001dde9400d5 forgets a crucial point: that for
some long-running operations, the EC physically cannot respond to
commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be
re-flashing its own code regions, so it can't respond to SPI interrupts.
Instead, the EC prepares us ahead of time for being busy for a "long"
time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we
expect to see several "transport" errors (or, messages filled with
EC_SPI_PAST_END). So we should really translate that to a retryable
error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we
get a ready status.
IOW, it is actually important to treat some of these "junk" values as
retryable errors.
Together with commit 001dde9400d5, this resolves bugs like the
following:
1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400d5, we
would abort the first time we saw EC_SPI_PAST_END)
2. Before commit 001dde9400d5, transport errors (e.g.,
EC_SPI_RX_BAD_DATA) seen in other commands (e.g.,
EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they
will now yield -EAGAIN return values, and tools like 'hwclock' will
simply fail instead of retrieving and re-programming undefined time
values
Fixes: 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error signaling") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sinan Kaya [Mon, 16 Apr 2018 22:16:56 +0000 (18:16 -0400)]
alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2
memory-barriers.txt has been updated with the following requirement.
"When using writel(), a prior wmb() is not needed to guarantee that the
cache coherent memory writes have completed before writing to the MMIO
region."
Current writeX() and iowriteX() implementations on alpha are not
satisfying this requirement as the barrier is after the register write.
Move mb() in writeX() and iowriteX() functions to guarantee that HW
observes memory changes before performing register operations.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Matt Turner <mattst88@gmail.com>
The generic dma_direct implementation does the same thing as the alpha
pci-noop implementation, just with more bells and whistles. And unlike
the current code it at least has a theoretical chance to actually compile.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matt Turner <mattst88@gmail.com>