Daniel Vetter [Mon, 23 Mar 2020 14:49:05 +0000 (15:49 +0100)]
drm/udl: Use drmm_add_final_kfree
With this we can drop the final kfree from the release function.
v2: We need drm_dev_put to unroll the driver creation (once
drm_dev_init and drmm_add_final_kfree suceeded), otherwise
the drmm_ magic doesn't happen.
v3: Actually squash in the fixup (Laurent).
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-7-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 23 Mar 2020 14:49:04 +0000 (15:49 +0100)]
drm/mipi_dbi: Use drmm_add_final_kfree in all drivers
They all share mipi_dbi_release so we need to switch them all
together. With this we can drop the final kfree from the release
function.
Aside, I think we could perhaps have a tiny additional helper for
these mipi_dbi drivers, the first few lines around devm_drm_dev_init
are all the same (except for the drm_driver pointer).
Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-6-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 24 Mar 2020 12:45:40 +0000 (13:45 +0100)]
drm: add managed resources tied to drm_device
We have lots of these. And the cleanup code tends to be of dubious
quality. The biggest wrong pattern is that developers use devm_, which
ties the release action to the underlying struct device, whereas
all the userspace visible stuff attached to a drm_device can long
outlive that one (e.g. after a hotunplug while userspace has open
files and mmap'ed buffers). Give people what they want, but with more
correctness.
Mostly copied from devres.c, with types adjusted to fit drm_device and
a few simplifications - I didn't (yet) copy over everything. Since
the types don't match code sharing looked like a hopeless endeavour.
For now it's only super simplified, no groups, you can't remove
actions (but kfree exists, we'll need that soon). Plus all specific to
drm_device ofc, including the logging. Which I didn't bother to make
compile-time optional, since none of the other drm logging is compile
time optional either.
One tricky bit here is the chicken&egg between allocating your
drm_device structure and initiliazing it with drm_dev_init. For
perfect onion unwinding we'd need to have the action to kfree the
allocation registered before drm_dev_init registers any of its own
release handlers. But drm_dev_init doesn't know where exactly the
drm_device is emebedded into the overall structure, and by the time it
returns it'll all be too late. And forcing drivers to be able clean up
everything except the one kzalloc is silly.
Work around this by having a very special final_kfree pointer. This
also avoids troubles with the list head possibly disappearing from
underneath us when we release all resources attached to the
drm_device.
v2: Do all the kerneldoc at the end, to avoid lots of fairly pointless
shuffling while getting everything into shape.
v3: Add static to add/del_dr (Neil)
Move typo fix to the right patch (Neil)
v4: Enforce contract for drmm_add_final_kfree:
Use ksize() to check that the drm_device is indeed contained somewhere
in the final kfree(). Because we need that or the entire managed
release logic blows up in a pile of use-after-frees. Motivated by a
discussion with Laurent.
v5: Review from Laurent:
- %zu instead of casting size_t
- header guards
- sorting of includes
- guarding of data assignment if we didn't allocate it for a NULL
pointer
- delete spurious newline
- cast void* data parameter correctly in ->release call, no idea how
this even worked before
v6: Review from Sam
- Add the kerneldoc for the managed sub-struct back in, even if it
doesn't show up in the generated html somehow.
- Explain why __always_inline.
- Fix bisectability around the final kfree() in drm_dev_relase(). This
is just interim code which will disappear again.
- Some whitespace polish.
- Add debug output when drmm_add_action or drmm_kmalloc fail.
v7: My bisectability fix wasn't up to par as noticed by smatch.
v8: Remove unecessary {} around if else
v9: Use kstrdup_const, which requires kfree_const and introducing a free_dr()
helper (Thomas).
v10: kfree_const goes boom on the plain "kmalloc" assignment, somehow
we need to wrap that in kstrdup_const() too!! Also renumber revision
log, I somehow reset it midway thruh.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Neil Armstrong <narmstrong@baylibre.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200324124540.3227396-1-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 23 Mar 2020 14:49:01 +0000 (15:49 +0100)]
drm/i915: Don't clear drvdata in ->release
For two reasons:
- The driver core clears this already for us after we're unloaded in
__device_release_driver().
- It's way too late, the drm_device ->release callback might massively
outlive the underlying physical device, since a drm_device can be
kept alive by open drm_file or well really anything else userspace
is still hanging onto. So if we clear this ourselves, we should
clear it in the pci ->remove callback, not in the drm_device
->release callback.
Looking at git history this was fixed in the driver core with
Daniel Vetter [Mon, 23 Mar 2020 14:49:00 +0000 (15:49 +0100)]
mm/sl[uo]b: export __kmalloc_track(_node)_caller
slab does this already, and I want to use this in a memory allocation
tracker in drm for stuff that's tied to the lifetime of a drm_device,
not the underlying struct device. Kinda like devres, but for drm.
Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-2-daniel.vetter@ffwll.ch
Jernej Skrabec [Wed, 4 Mar 2020 23:25:12 +0000 (00:25 +0100)]
drm/bridge: dw-hdmi: rework csc related functions
is_color_space_conversion() is a misnomer. It checks not only if color
space conversion is needed, but also if format conversion is needed.
This is actually desired behaviour because result of this function
determines if CSC block should be enabled or not (CSC block can also do
format conversion).
In order to clear misunderstandings, let's rework
is_color_space_conversion() to do exactly what is supposed to do and add
another function which will determine if CSC block must be enabled or
not.
Jernej Skrabec [Wed, 4 Mar 2020 23:25:11 +0000 (00:25 +0100)]
drm/bridge: dw-hdmi: Add support for RGB limited range
CEA 861 standard requestis that RGB quantization range is "limited" for
CEA modes. Support that by adding CSC matrix which downscales values.
This allows proper color reproduction on TV and PC monitor at the same
time. In future, override property can be added, like "Broadcast RGB"
in i915 driver.
Jonas Karlman [Wed, 4 Mar 2020 23:25:10 +0000 (00:25 +0100)]
drm/bridge: dw-hdmi: do not force "none" scan mode
Setting scan mode to "none" confuses some TVs like LG B8, which randomly
change overscan percentage over time. Digital outputs like HDMI and DVI,
handled by this controller, don't really need overscan, so we can always
set scan mode to underscan. Actually, this is exactly what
drm_hdmi_avi_infoframe_from_display_mode() already does, so we can just
remove offending line.
Jernej Skrabec [Mon, 24 Feb 2020 17:39:00 +0000 (18:39 +0100)]
drm/sun4i: de2: Don't return de2_fmt_info struct
Now that de2_fmt_info contains only DRM <-> HW format mapping, it
doesn't make sense to return pointer to structure when searching by DRM
format. Rework that to return only HW format instead.
Remove unneeded #if/#endif guards for checking whether the
CONFIG_DEBUG_FS option is set or not. If the option is not set, the
compiler optimizes the functions making the guards
unnecessary.
Randy Dunlap [Sun, 15 Mar 2020 04:10:02 +0000 (21:10 -0700)]
fbdev: via: fix -Wextra build warning and format warning
When 'VIAFB_DEBUG' and 'VIAFB_WARN' are not defined, modify the
DEBUG_MSG() &WARN_MSG() macros to use the no_printk() macro instead of
using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/via/ioctl.c:88:47: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Also use %lu to print an unsigned long instead of just %l, to fix
a printk format warning:
../drivers/video/fbdev/via/viafbdev.c: In function ‘viafb_dvp0_proc_write’:
../drivers/video/fbdev/via/viafbdev.c:1148:14: warning: unknown conversion type character ‘]’ in format [-Wformat=]
DEBUG_MSG("DVP0:reg_val[%l]=:%x\n", i,
Randy Dunlap [Sun, 15 Mar 2020 04:10:01 +0000 (21:10 -0700)]
fbdev: pm[23]fb.c: fix -Wextra build warnings and errors
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes build warnings when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/pm2fb.c:227:38: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/pm3fb.c:1039:33: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Also drop one argument in two DPRINTK() macro uses to provide the
correct number of arguments and use the correct field in one case
to fix a build error:
../drivers/video/fbdev/pm3fb.c:353:9: error: ‘struct fb_info’ has no member named ‘current_par’
info->current_par->depth);
Randy Dunlap [Sun, 15 Mar 2020 04:10:00 +0000 (21:10 -0700)]
fbdev: savage: fix -Wextra build warning
When 'SAVAGEFB_DEBUG' is not defined, modify the DBG() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/savage/savagefb_driver.c:2411:13: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Randy Dunlap [Sun, 15 Mar 2020 04:09:59 +0000 (21:09 -0700)]
fbdev: matrox: fix -Wextra build warnings
When 'DEBUG' is not defined, modify the dprintk() macro to use the
no_printk() macro instead of using <empty>.
This fixes build warnings when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/matrox/matroxfb_base.c:635:77: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:632:54: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:654:53: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Randy Dunlap [Sun, 15 Mar 2020 04:09:58 +0000 (21:09 -0700)]
fbdev: aty: fix -Wextra build warning
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/aty/atyfb_base.c:784:61: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Randy Dunlap [Sun, 15 Mar 2020 04:09:57 +0000 (21:09 -0700)]
fbdev: fbmon: fix -Wextra build warnings
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/core/fbmon.c:812:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:842:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:847:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Takashi Iwai [Wed, 11 Mar 2020 09:32:30 +0000 (10:32 +0100)]
video: uvesafb: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Takashi Iwai [Wed, 11 Mar 2020 09:32:29 +0000 (10:32 +0100)]
video: omap2: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Takashi Iwai [Wed, 11 Mar 2020 09:32:28 +0000 (10:32 +0100)]
video: omapfb: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Jiri Slaby [Thu, 19 Mar 2020 10:04:21 +0000 (11:04 +0100)]
drm/virtio: fix OOB in virtio_gpu_object_create
After commit f651c8b05542 ("drm/virtio: factor out the sg_table from
virtio_gpu_object"), virtio_gpu_create_object allocates too small space
to fit everything in. It is because it allocates struct
virtio_gpu_object, but should allocate a newly added struct
virtio_gpu_object_shmem which has 2 more members.
So fix that by using correct type in virtio_gpu_create_object.
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: http://patchwork.freedesktop.org/patch/msgid/20200319100421.16267-1-jslaby@suse.cz Fixes: f651c8b05542 ("drm/virtio: factor out the sg_table from virtio_gpu_object") Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ville Syrjälä [Wed, 18 Mar 2020 18:25:18 +0000 (20:25 +0200)]
drm: Skip drm_mode_config_validate() for !modeset
drm_mode_config_init() may not have been called when the driver/device
doesn't support modeset. That will cause drm_mode_config_validate()
to oops. Skip the validation for !modeset.
TODO: We may want to consider calling drm_mode_config_init()
unconditionally to avoid similar issues elsewhere...
Wambui Karuga [Tue, 10 Mar 2020 13:31:21 +0000 (16:31 +0300)]
drm: convert .debugfs_init() hook to return void.
As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.
This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.
v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.
Ville Syrjälä [Tue, 11 Feb 2020 16:22:06 +0000 (18:22 +0200)]
drm: Validate encoder->possible_clones
Many drivers are populating encoder->possible_clones wrong. Let's
persuade them to get it right by adding some loud WARNs.
We'll cross check the bits between any two encoders. So either
both encoders can clone with the other, or neither can.
We'll also complain about effectively empty possible_clones, and
possible_clones containing bits for encoders that don't exist.
v2: encoder->possible_clones now includes the encoder itelf
v3: Move to drm_mode_config_validate() (Daniel)
Document that you get a WARN when this is wrong (Daniel)
Extract full_encoder_mask()
v4: !! instead of ! (Daniel)
Ville Syrjälä [Tue, 11 Feb 2020 16:22:03 +0000 (18:22 +0200)]
drm/gma500: Sanitize possible_clones
I doubt the DP+DP and SDVO+SDVO cloning works for this driver.
i915 at least doesn't do those. Truthfully there could be some very
specific circumstances where some of them would do doable, but
genereally it's too much pain to deal with so we've chose not to
bother. Let's use the same approach for gma500.
Also the LVDS+LVDS and DSI+DSI cases probably don't really exist as
there is one of each at most.
This does mean we'll now leave possible_clones at 0 for these encoder
types whereas previosuly we included the encoder itself in the bitmask.
But that's fine as the core now treaks 0 as a special case and adds
the encoder itself into the final bitmask reported to userspace.
Ville Syrjälä [Tue, 11 Feb 2020 16:22:02 +0000 (18:22 +0200)]
drm: Include the encoder itself in possible_clones
The docs say possible_clones should always include the encoder itself.
Since most drivers don't want to deal with the complexities of cloning
let's allow them to set possible_clones=0 and instead we'll fix that
up in the core.
We can't put this special case into drm_encoder_init() because drivers
will have to fill up possible_clones after adding all the relevant
encoders. Otherwise they wouldn't know the proper encoder indexes to
use. So we'll just do it just before registering the device.
v2: Don't set the bit if possible_clones!=0 so that the
validation (coming soon) will WARN (Thomas)
Fix up the docs to allow possible_clones==0 (Daniel)
.late_register() is too late, introduce drm_mode_config_validate()
which gets called _before_ we register the char device (Daniel)
Wambui Karuga [Tue, 10 Mar 2020 13:31:20 +0000 (16:31 +0300)]
drm/debugfs: remove checks for return value of drm_debugfs functions.
Since 987d65d01356 (drm: debugfs: make drm_debugfs_create_files() never
fail), there is no need to check the return value of
drm_debugfs_create_files(). Therefore, remove remove unnecessary checks
and error handling statement blocks for its return value.
These changes also enable changing drm_debugfs_create_files() to return
void.
Ville Syrjälä [Fri, 13 Mar 2020 16:20:54 +0000 (18:20 +0200)]
drm/edid: Fix DispID tile parsing for override EDID
Currently the DispID tile block gets parsed in drm_get_edid(), which
is an odd place for it considering we parse nothing else there. Also
this doesn't work for override EDIDs since
drm_connector_update_edid_property() refuses to do its job twice
in such cases. Thus we never update the tile property with results
of the DispID tile block parsing during drm_get_edid().
To fix this let's just move the tile block parsing to happen during
drm_connector_update_edid_property(), which is where we parse a bunch
of other stuff as well (and where we update both the EDID and tile
properties).
Ville Syrjälä [Fri, 13 Mar 2020 16:20:53 +0000 (18:20 +0200)]
drm/edid: Clarify validate_displayid()
Throw out the magic '5' from validate_displayid() and replace with
the actual thing we mean sizeof(header)+checksum. Also rewrite the
checksum loop to be less hard to parse for mere mortals.
Ville Syrjälä [Fri, 13 Mar 2020 16:20:51 +0000 (18:20 +0200)]
drm/edid: Don't parse garbage as DispID blocks
Currently the code assumes that the entire EDID extesion block
can be taken up by the DispID blocks. That is not true. There
is at least always the DispID checksum, and potentially fill
bytes if the extension block uses the interior fill scheme
to pad out to fill EDID block size.
So let's not parse the checksum or the fill bytes as DispID
blocks by having drm_find_displayid_extension() return the
actual length of the DispID data to the caller.
Ville Syrjälä [Fri, 13 Mar 2020 16:20:49 +0000 (18:20 +0200)]
drm/edid: Return DispID length from drm_find_displayid_extension()
As with the byte offset (idx) drm_find_displayid_extension() is
the only one who actually knows how much data the resulting DispID
block can contain. So return the length from therein instead of
assuming it's the EDID block length all over.
Ville Syrjälä [Fri, 13 Mar 2020 16:20:48 +0000 (18:20 +0200)]
drm/edid: Remove idx==1 assumptions from all over the DispID parsing
The fact that the DispID starts at byte offset 1 is due to
the DispID coming from and EDID extension block (the first byte
being the extesion block tag). Instead of hadrdocoding that idx==1
assumptions all over let's just have drm_find_displayid_extension()
return it since it actually knows what it's talking about.
If at some point someone comes across a DispID which is not embedded
inside an EDID the function that returns the new type of DispID
can return it's own byte offset without having to updated all the
code.
TODO: should probably just get rid of that idx thing altogether
and just return the thing we want directly.
Wambui Karuga [Tue, 10 Mar 2020 13:31:19 +0000 (16:31 +0300)]
drm: make various debugfs_init() functions return 0
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of various debugfs_init() functions in drm, and have these
functions return 0 directly.
v2: convert debugfs_init() functions to return 0 instead of void to
avoid build breakage.
Wambui Karuga [Tue, 10 Mar 2020 13:31:18 +0000 (16:31 +0300)]
drm/i915: have *_debugfs_init() functions return void.
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of debugfs_init() functions and have the functions return
void.
v2: convert intel_display_debugfs_register() stub to return void too.
Wambui Karuga [Tue, 10 Mar 2020 13:31:17 +0000 (16:31 +0300)]
drm/omap: remove checks for return value of drm_debugfs functions
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), there is no need to ever check
the return value for drm_debugfs_create_files(). Therefore remove the
checks for the return value and subsequent error handling in
omap_debugfs_init().
These changes also enables the changing of omap_debugfs_init() to return
0 directly.
v2: convert omap_debugfs_init() to return 0 instead of void to avoid
introduction of build issues and enable individual driver compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:16 +0000 (16:31 +0300)]
drm/pl111: make pl111_debugfs_init return 0
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) drm_debugfs_create_files()
should return void. Therefore, remove its use as the return value in
pl111_debugfs_init(), and have the function return 0 directly.
v2: have pl111_debugfs_init() return 0 instead of void to avoid build
breakage for individual compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:15 +0000 (16:31 +0300)]
drm/nouveau: make nouveau_drm_debugfs_init() return 0
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), there is no need to ever check
for the the return value of debugfs_create_file() and
drm_debugfs_create_files(). Therefore, remove unnecessary checks and
error handling in nouveau_drm_debugfs_init() and have the function
return 0 directly.
v2: have nouveau_drm_debugfs_init() return 0 instead of void so as not
to introduce any build warnings to enable individual patch compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:14 +0000 (16:31 +0300)]
drm/vram-helper: make drm_vram_mm_debugfs_init() return 0
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of drm_vram_mm_debugfs_init(), and have the function
return 0 directly.
v2: have drm_vram_mm_debugfs_init() return 0 instead of void to avoid
introducing build issues and build breakage.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-11-wambui.karugax@gmail.com
Wambui Karuga [Tue, 10 Mar 2020 13:31:13 +0000 (16:31 +0300)]
drm/sti: remove use of drm_debugfs functions as return values
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails, and should return void. This change therefore removes it uses as
a return value in various functions across drm/sti.
With these changes, the affected functions have been changed to use a void
return value.
v2: convert sti_mixer_debugfs_init() and sti_compositor_debugfs_init()
to return void too. Also have sti_drm_dbg_init() to return 0 to avoid
build issues.
Wambui Karuga [Tue, 10 Mar 2020 13:31:12 +0000 (16:31 +0300)]
drm/msm: remove checks for return value of drm_debugfs_create_files()
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files never
fails and only returns 0. Therefore, the unnecessary checks for its
return value and error handling in various debugfs_init() functions in
drm/msm and have the functions return 0 directly.
v2: have debug functions return 0 instead of void to avoid build
breakage and ensure standalone compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:11 +0000 (16:31 +0300)]
drm/etnaviv: remove check for return value of drm_debugfs_create_files()
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and only returns 0. Therefore, remove the unnecessary check of its
return value and error handling in etnaviv_debugfs_init() and have the
function return 0 directly.
v2: have etnaviv_debugfs_init() return 0 instead of void to ensure
individual compilation and avoid build breakage.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-8-wambui.karugax@gmail.com
Wambui Karuga [Tue, 10 Mar 2020 13:31:10 +0000 (16:31 +0300)]
drm/arm: make hdlcd_debugfs_init() return 0
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of hdlcd_debugfs_init() and have the latter function return
0 directly.
v2: make hdlcd_debugfs_init() return 0 instead of void to ensure that
each patch compiles individually.
Wambui Karuga [Tue, 10 Mar 2020 13:31:09 +0000 (16:31 +0300)]
drm/arc: make arcgpu_debugfs_init() return 0.
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of arcpgu_debugfs_init() and have the latter function return
0 directly.
v2: convert the function to return 0 instead of void to avoid breaking
the build and ensure that this individual patch compiles properly.
Wambui Karuga [Tue, 10 Mar 2020 13:31:08 +0000 (16:31 +0300)]
drm/vc4: remove check of return value of drm_debugfs functions
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove unnecessary check and
error handling for the return value of drm_debugfs_create_files()
in vc4_debugfs_init().
v2: remove conversion of vc4_debugfs_init() to void to enable individual
compilation and avoid build issues and breakage.
Wambui Karuga [Tue, 10 Mar 2020 13:31:07 +0000 (16:31 +0300)]
drm/v3d: make v3d_debugfs_init() return 0
Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of v3d_debugfs_init() and have the function return 0
directly instead.
v2: remove conversion of v3d_debugfs_init() to void to avoid build
breakage and enable individual compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:06 +0000 (16:31 +0300)]
drm/tilcdc: remove check for return value of debugfs functions.
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails. Therefore, remove the check and error handling of the return
value of drm_debugfs_create_files() as it is not needed in
tilcdc_debugfs_init().
Also remove local variables that are not used after the changes.
v2: remove conversion of tilcdc_debugfs_init() to void to avoid build
breakage and enable individual compilation.
Wambui Karuga [Tue, 10 Mar 2020 13:31:05 +0000 (16:31 +0300)]
drm/tegra: remove checks for debugfs functions return value
Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) there is no need to check the
return value of drm_debugfs_create_files(). Therefore, remove the
return checks and error handling of the drm_debugfs_create_files()
function from various debugfs init functions in drm/tegra and have
them return 0 directly.
v2: remove conversion of tegra_debugfs_init() to void to avoid build
breakage.
drm/core: Add drm_afbc_framebuffer and a corresponding helper
The new struct contains afbc-specific data.
The new function can be used by drivers which support afbc to complete
the preparation of struct drm_afbc_framebuffer. It must be called after
allocating the said struct and calling drm_gem_fb_init_with_funcs().
drm/core: Allow drivers allocate a subclass of struct drm_framebuffer
Allow allocating a specialized version of struct drm_framebuffer
by moving the actual fb allocation out of drm_gem_fb_create_with_funcs();
the respective functions names are adjusted to reflect that fact.
Please note, though, that standard size checks are performed on buffers,
so the drm_gem_fb_init_with_funcs() is useful for cases where those
standard size checks are appropriate or at least don't conflict the
checks to be performed in the specialized case.
Thanks to this change the drivers can call drm_gem_fb_init_with_funcs()
having allocated their special version of struct drm_framebuffer, exactly
the way the new version of drm_gem_fb_create_with_funcs() does.
Kees Cook [Fri, 6 Mar 2020 17:32:13 +0000 (09:32 -0800)]
drm/edid: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, lift such variables up into the next code
block.
drivers/gpu/drm/drm_edid.c: In function ‘drm_edid_to_eld’:
drivers/gpu/drm/drm_edid.c:4395:9: warning: statement will never be
executed [-Wswitch-unreachable]
4395 | int sad_count;
| ^~~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
v2: move into function block instead being switch-local (Ville Syrjälä)
Sam Ravnborg [Sun, 8 Mar 2020 11:50:17 +0000 (12:50 +0100)]
dt-bindings: display: fix panel warnings
Fix following type af warnings in the panel bindings:
Warning (unit_address_vs_reg): /example-0/dsi/panel: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /example-0/dsi@ff450000: node has a unit name, but no reg property
Removing the "@xxx" from the node name fixed first warning.
Adding a missing reg property fixed the second warning
v2:
- renamed mdss_dsi to dsi in panel-simple-dsi.yaml (Rob)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200308115017.18563-2-sam@ravnborg.org
Lyude Paul [Wed, 22 Jan 2020 19:48:46 +0000 (14:48 -0500)]
drm/dp_mst: Convert drm_dp_mst_topology_mgr.is_waiting_for_dwn_reply to bitfield
Small nitpick that I noticed a second ago - we can save some space in
the struct by making this a bitfield and sticking it with the rest of
the bitfields. Also, some small cleanup to the kdocs for this member.
There should be no functional changes in this patch.
Dave Airlie [Thu, 12 Mar 2020 23:09:11 +0000 (09:09 +1000)]
Merge tag 'amd-drm-next-5.7-2020-03-10' of git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.7-2020-03-10:
amdgpu:
- SR-IOV fixes
- Fix up fallout from drm load/unload callback removal
- Navi, renoir power management watermark fixes
- Refactor smu parameter handling
- Display FEC fixes
- Display DCC fixes
- HDCP fixes
- Add support for USB-C PD firmware updates
- Pollock detection fix
- Rework compute ring priority handling
- RAS fixes
- Misc cleanups
amdkfd:
- Consolidate more gfx config details in amdgpu
- Consolidate bo alloc flags
- Improve code comments
- SDMA MQD fixes
- Misc cleanups
gpu scheduler:
- Add suport for modifying the sched list
uapi:
- Clarify comments about GEM_CREATE flags that are not used by userspace.
The kernel driver has always prevented userspace from using these.
They are only used internally in the kernel driver.
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector((drm_connector_unregister()/drm_connector_put())) except for
amdgpu_dm driver where some amdgpu_dm specific code in there.
This connector cleaning up is now being handled in the drm core so
driver destroy_connector callbacks are not needed (except for
amdgpu_dm) hence remove them.
drm: Add drm_dp_destroy_connector helper and use it
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector (drm_connector_unregister()/drm_connector_put()) except for
amdgpu_dm driver where some amdgpu_dm specific code in there which I
an not sure if it should stay or not.
Create and use a helper which calls driver's destroy_connector hook if
available otherwise does cleanup internally.
This is the step towards removing identical hooks from every driver.
drm_dp_mst_port_add_connector() directly calls the
drm_connector_register() now and
drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting
called anymore.
Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector
callbacks.
This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.
drm: Register connector instead of calling register_connector callback
drm_dp_mst_topology_mgr_cbs.register_connector callbacks are literally
identical amongst every driver and don't do anything other than
calling drm_connector_register(). Hence call drm_connector_register()
directly instead of a callback.
This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.
Manasi Navare [Tue, 10 Mar 2020 23:16:51 +0000 (16:16 -0700)]
drm/edid: Add function to parse EDID descriptors for monitor range
Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers
v6:
* Call it monitor_range (Ville)
v5:
* Use the renamed flags
v4:
* Use is_display_descriptor() (Ville)
* Name the monitor range flags (Ville)
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com
Manasi Navare [Tue, 10 Mar 2020 23:16:50 +0000 (16:16 -0700)]
drm/edid: Name the detailed monitor range flags
This patch adds defines for the detailed monitor
range flags as per the EDID specification.
v2:
* Rename the flags with DRM_EDID_ (Jani N)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-1-manasi.d.navare@intel.com
Takashi Iwai [Wed, 11 Mar 2020 07:35:40 +0000 (08:35 +0100)]
drm: sysfs: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Takashi Iwai [Wed, 11 Mar 2020 07:34:52 +0000 (08:34 +0100)]
drm/ttm: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/357174/ Signed-off-by: Christian König <christian.koenig@amd.com>
projects / mirror_ubuntu-kernels.git / log