Dmitry Torokhov [Tue, 14 Feb 2017 18:23:31 +0000 (10:23 -0800)]
ptp: do not explicitly set drvdata in ptp_clock_register()
We do not need explicitly call dev_set_drvdata(), as it is done for us by
device_create().
Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 10 Feb 2017 12:27:58 +0000 (04:27 -0800)]
mlx4: do not fire tasklet unless necessary
All rx and rx netdev interrupts are handled by respectively
by mlx4_en_rx_irq() and mlx4_en_tx_irq() which simply schedule a NAPI.
But mlx4_eq_int() also fires a tasklet to service all items that were
queued via mlx4_add_cq_to_tasklet(), but this handler was not called
unless user cqe was handled.
This is very confusing, as "mpstat -I SCPU ..." show huge number of
tasklet invocations.
This patch saves this overhead, by carefully firing the tasklet directly
from mlx4_add_cq_to_tasklet(), removing four atomic operations per IRQ.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Make struct xfrm_input_afinfo const, nothing writes to it.
From Florian Westphal.
2) Remove all places that write to the afinfo policy backend
and make the struct const then.
From Florian Westphal.
3) Prepare for packet consuming gro callbacks and add
ESP GRO handlers. ESP packets can be decapsulated
at the GRO layer then. It saves a round through
the stack for each ESP packet.
Please note that this has a merge coflict between commit
63fca65d0863 ("net: add confirm_neigh method to dst_ops")
David S. Miller [Fri, 17 Feb 2017 02:19:44 +0000 (21:19 -0500)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2017-02-16
This series contains updates to ixgbe only.
Tony updates the driver to advertise 2.5Gb and 5.0Gb if the adapter
supports it.
Stephen Hemminger renames our dcbnl_ops since it is global to
ixgbe_dcbnl_ops to avoid namespace issues.
Mark updates the driver version based on the recent changes.
Alex has the remainder of the changes, starting with consolidating
functions that represent logical steps in the receive process so we can
later update them more easily (and align with igb). Modify the receive
path to only synchronize the length of the frame versus the entire buffer.
Provided performance improvements by adding support for
DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. Also made additional
performance gains by batching the page count updates instead of doing
them one at a time. Adjusted the receive path to use 3k buffers with
8k backing them in order to support build_skb with jumbo frames. Made
additional driver improvements by using the length of the packet instead
of the DD status to determine if a new descriptor is ready to be
processed, which cuts down on reads. To reduce code duplication, pulled
apart the receive path into separate functions. Added support for
providing a buffer with headroom and tailroom to allow for shared info
for NET_SKB_PAD and NET_IP_ALIGN.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Miklos Szeredi [Thu, 16 Feb 2017 16:49:02 +0000 (17:49 +0100)]
vfs: fix uninitialized flags in splice_to_pipe()
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer. Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.
Uninitialized flags appears to have been there from the introduction of
the splice syscall.
Linus Torvalds [Thu, 16 Feb 2017 17:05:34 +0000 (09:05 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix a use after free bug introduced in 4.2 and using an uninitialized
value introduced in 4.9"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix uninitialized flags in pipe_buffer
fuse: fix use after free issue in fuse_dev_do_read()
Linus Torvalds [Thu, 16 Feb 2017 17:03:37 +0000 (09:03 -0800)]
Merge tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Add back pcie_pme_remove() so we free the IRQ when removing PCIe port
devices; previously the leaked IRQ caused an MSI BUG_ON"
* tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/PME: Restore pcie_pme_driver.remove
1) In order to avoid problems in the future, make cgroup bpf overriding
explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov.
2) LLC sets skb->sk without proper skb->destructor and this explodes,
fix from Eric Dumazet.
3) Make sure when we have an ipv4 mapped source address, the
destination is either also an ipv4 mapped address or
ipv6_addr_any(). Fix from Jonathan T. Leighton.
4) Avoid packet loss in fec driver by programming the multicast filter
more intelligently. From Rui Sousa.
5) Handle multiple threads invoking fanout_add(), fix from Eric
Dumazet.
6) Since we can invoke the TCP input path in process context, without
BH being disabled, we have to accomodate that in the locking of the
TCP probe. Also from Eric Dumazet.
7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we
aren't even updating that sysctl value. From Marcus Huewe.
8) Fix endian bugs in ibmvnic driver, from Thomas Falcon.
[ This is the second version of the pull that reverts the nested
rhashtable changes that looked a bit too scary for this late in the
release - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
rhashtable: Revert nested table changes.
ibmvnic: Fix endian errors in error reporting output
ibmvnic: Fix endian error when requesting device capabilities
net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification
net: xilinx_emaclite: fix freezes due to unordered I/O
net: xilinx_emaclite: fix receive buffer overflow
bpf: kernel header files need to be copied into the tools directory
tcp: tcp_probe: use spin_lock_bh()
uapi: fix linux/if_pppol2tp.h userspace compilation errors
packet: fix races in fanout_add()
ibmvnic: Fix initial MTU settings
net: ethernet: ti: cpsw: fix cpsw assignment in resume
kcm: fix a null pointer dereference in kcm_sendmsg()
net: fec: fix multicast filtering hardware setup
ipv6: Handle IPv4-mapped src to in6addr_any dst.
ipv6: Inhibit IPv4-mapped src address on the wire.
net/mlx5e: Disable preemption when doing TC statistics upcall
rhashtable: Add nested tables
tipc: Fix tipc_sk_reinit race conditions
gfs2: Use rhashtable walk interface in glock_hash_walk
...
Alexander Duyck [Tue, 17 Jan 2017 16:37:29 +0000 (08:37 -0800)]
ixgbe: Don't bother clearing buffer memory for descriptor rings
This patch makes it so that we don't need to bother with clearing the
memory out for the descriptor rings. The general idea is to only free
buffers associated with buffers in use which are located between the
next_to_clean and next_to_use or next_to_alloc values. Everything outside
of those regions can be safely ignored since they should have no buffers
associated with them.
The advantage to doing things this way is that is should speed up bring-up
and tear-down of the rings. Specifically we can avoid the 512 or more
cycles required to memset the rings in tear-down. In the bring-up phase we
then clear the memory as a part of initialization. The general idea is
that the clearing in initialization can act as a prefetch of sorts for the
buffer info structures so they are in the local CPU when we go to populate
them. This should help to improve overall time needed to perform a
suspend/resume.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:37:13 +0000 (08:37 -0800)]
ixgbe: Add support for build_skb
This patch adds build_skb support to the Rx path. There are several
advantages to this change.
1. It avoids the memcpy and skb->head allocation for small packets which
improves performance by about 5% in my tests.
2. It avoids the memcpy, skb->head allocation, and eth_get_headlen
for larger packets improving performance by about 10% in my tests.
3. For VXLAN packets it allows the full header to be in skb->data which
improves the performance by as much as 30% in some of my tests.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:37:03 +0000 (08:37 -0800)]
ixgbe: Add private flag to control buffer mode
Since there are potential drawbacks to the new Rx allocation approach I
thought it best to add a "chicken bit" so that we can turn the feature off
if in the event that a problem is found.
It also provides a means of validating the legacy Rx path in the event that
we are forced to fall back. At some point in the future when we are
convinced we don't need it anymore we might be able to drop the legacy-rx
flag.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:36:54 +0000 (08:36 -0800)]
ixgbe: Add support for padding packet
This patch adds support for providing a buffer with headroom and tailroom
to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this
combined with the DMA changes we can start using build_skb to build frames
around an incoming Rx buffer instead of having to memcpy the headers.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:36:45 +0000 (08:36 -0800)]
ixgbe: Break out Rx buffer page management
We are going to be expanding the number of Rx paths in the driver. Instead
of duplicating all that code I am pulling it apart into separate functions
so that we don't have so much code duplication.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:36:28 +0000 (08:36 -0800)]
ixgbe: Use length to determine if descriptor is done
This change makes it so that we use the length of the packet instead of the
DD status bit to determine if a new descriptor is ready to be processed.
The obvious advantage is that it cuts down on reads as we don't really even
need the DD bit if going from a 0 to a non-zero value on size is enough to
inform us that the packet has been completed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:36:14 +0000 (08:36 -0800)]
ixgbe: Make use of order 1 pages and 3K buffers independent of FCoE
In order to support build_skb with jumbo frames it will be necessary to use
3K buffers for the Rx path with 8K pages backing them. This is needed on
architectures that implement 4K pages because we can't support 2K buffers
plus padding in a 4K page.
In the case of systems that support page sizes larger than 4K the 3K
attribute will only be applied to FCoE as we can fall back to using just 2K
buffers and adding the padding.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:36:03 +0000 (08:36 -0800)]
ixgbe: Update code to better handle incrementing page count
Batch the page count updates instead of doing them one at a time. By doing
this we can improve the overall performance as the atomic increment
operations can be expensive due to the fact that on x86 they are locked
operations which can cause stalls. By doing bulk updates we can
consolidate the stall which should help to improve the overall receive
performance.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:35:54 +0000 (08:35 -0800)]
ixgbe: Update driver to make use of DMA attributes in Rx path
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and
DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are
able to see performance improvements on architectures that implement either
one due to the fact that page mapping and unmapping only has to sync what
is actually being used instead of the entire buffer. In addition by
enabling the weak ordering attribute enables a performance improvement for
architectures that can associate a memory ordering with a DMA buffer such
as Sparc.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:35:44 +0000 (08:35 -0800)]
ixgbe: Only DMA sync frame length
On some platforms, syncing a buffer for DMA is expensive. Rather than
sync the whole 2K receive buffer, only synchronise the length of the
frame, which will typically be the MTU, or a much smaller TCP ACK.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Tue, 17 Jan 2017 16:35:34 +0000 (08:35 -0800)]
ixgbe: Add function for checking to see if we can reuse page
This patch consolidates the code for the ixgbe driver so that it is more
inline with what is already in igb. The general idea is to just
consolidate functions that represent logical steps in the Rx process so we
can later update them more easily.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mark Rustad [Mon, 12 Dec 2016 23:08:13 +0000 (15:08 -0800)]
ixgbe: Update version to reflect added functionality
Update the driver version to reflect the new devices that it
supports.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since dcbnl_ops is global, it should be prefixed by ixgbe_
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 11 Nov 2016 00:01:33 +0000 (16:01 -0800)]
ixgbe: Support 2.5Gb and 5Gb speed
Though not advertised through ethtool, if the link partner advertises a
2.5Gb or 5Gb connection, and the adapter supports it, allow the speed to be
used.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Thomas Falcon [Wed, 15 Feb 2017 16:32:11 +0000 (10:32 -0600)]
ibmvnic: Fix endian error when requesting device capabilities
When a vNIC client driver requests a faulty device setting, the
server returns an acceptable value for the client to request.
This 64 bit value was incorrectly being swapped as a 32 bit value,
resulting in loss of data. This patch corrects that by using
the 64 bit swap function.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Koniarik [Wed, 15 Feb 2017 15:59:35 +0000 (16:59 +0100)]
atm: idt77252, use setup_timer and mod_timer
Stop accessing timer struct members directly and use setup_timer and
mod_timer helpers intended for that use. It makes the code cleaner and
will allow for easier change of the timer struct internals.
Signed-off-by: Jan Koniarik <jan.koniarik@trustica.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <3chas3@gmail.com> Cc: <linux-atm-general@lists.sourceforge.net> Cc: <netdev@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 15 Feb 2017 11:09:51 +0000 (12:09 +0100)]
mlxsw: acl: Use PBS type for forward action
Current behaviour of "mirred redirect" action (forward) offload is a bit
odd. For matched packets the action forwards them to the desired
destination, but it also lets the packet duplicates to go the original
way down (bridge, router, etc). That is more like "mirred mirror".
Fix this by using PBS type which behaves exactly like "mirred redirect".
Note that PBS does not support loopback mode.
Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:45 +0000 (10:46 +0100)]
net: stmmac: invert the logic for dumping regs
It is easier to follow the logic by removing the not operator
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:44 +0000 (10:46 +0100)]
net: stmmac: reduce indentation by adding a continue
As suggested by Joe Perches, replacing the "if phydev" logic permit to
reduce indentation in the for loop.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:43 +0000 (10:46 +0100)]
net: stmmac: split the stmmac_adjust_link 10/100 case
The 10/100 case have too many ifcase.
This patch split it for removing an if.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:42 +0000 (10:46 +0100)]
net: stmmac: run stmmac_hw_fix_mac_speed when speed is valid
This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after
the switch in case of valid speed.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:41 +0000 (10:46 +0100)]
net: stmmac: set speed at SPEED_UNKNOWN in case of broken speed
In case of invalid speed given, stmmac_adjust_link() still record it as
current speed.
This patch modify the default case to set speed as SPEED_UNKNOWN if not
10/100/1000.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:40 +0000 (10:46 +0100)]
net: stmmac: use SPEED_UNKNOWN/DUPLEX_UNKNOWN
It is better to use DUPLEX_UNKNOWN instead of just "-1".
Using 0 for an invalid speed is bad since 0 is a valid value for speed.
So this patch replace 0 by SPEED_UNKNOWN.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:39 +0000 (10:46 +0100)]
net: stmmac: likely is useless in occasional function
The stmmac_adjust_link() function is called too rarely for having
likely() macros being useful.
Just remove likely annotation in it.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 15 Feb 2017 09:46:38 +0000 (10:46 +0100)]
net: stmmac: remove useless parenthesis
This patch remove some useless parenthesis.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: aquantia: switch to pci_alloc_irq_vectors
pci_enable_msix has been long deprecated, but this driver adds a new
instance. Convert it to pci_alloc_irq_vectors so that no new instance
of the deprecated function reaches mainline.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Feb 2017 17:42:54 +0000 (12:42 -0500)]
Merge branch 'qed-ptp'
Yuval Mintz says:
====================
qed*: Add support for PTP
This patch series adds required changes for qed/qede drivers for
supporting the IEEE Precision Time Protocol (PTP).
Changes from previous versions:
v7: Fixed Kbuild robot warnings.
v6: Corrected broken loop iteration in previous version.
Reduced approximation error of adjfreq.
v5: Removed two divisions from the adjust-frequency loop.
Resulting logic would use 8 divisions [instead of 24].
v4: Remove the loop iteration for value '0' in the qed_ptp_hw_adjfreq()
implementation.
v3: Use div_s64 for 64-bit divisions as do_div gives error for signed
types.
Incorporated review comments from Richard Cochran.
- Clear timestamp resgisters as soon as timestamp is read.
- Use shift operation in the place of 'divide by 16'.
v2: Use do_div for 64-bit divisions.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the driver support for,
- Registering the ptp clock functionality with the OS.
- Timestamping the Rx/Tx PTP packets.
- Ethtool callbacks related to PTP.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds the required qed interfaces for configuring/reading
the PTP clock on the adapter.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarno Rajahalme [Wed, 15 Feb 2017 05:16:28 +0000 (21:16 -0800)]
openvswitch: Set internal device max mtu to ETH_MAX_MTU.
Commit 91572088e3fd ("net: use core MTU range checking in core net
infra") changed the openvswitch internal device to use the core net
infra for controlling the MTU range, but failed to actually set the
max_mtu as described in the commit message, which now defaults to
ETH_DATA_LEN.
This patch fixes this by setting max_mtu to ETH_MAX_MTU after
ether_setup() call.
Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
When setting a neigh related sysctl parameter, we always send a
NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when
executing
sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000
a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated.
This is caused by commit 2a4501ae18b5 ("neigh: Send a
notification when DELAY_PROBE_TIME changes"). According to the
commit's description, it was intended to generate such an event
when setting the "delay_first_probe_time" sysctl parameter.
In order to fix this, only generate this event when actually
setting the "delay_first_probe_time" sysctl parameter. This fix
should not have any unintended side-effects, because all but one
registered netevent callbacks check for other netevent event
types (the registered callbacks were obtained by grepping for
"register_netevent_notifier"). The only callback that uses the
NETEVENT_DELAY_PROBE_TIME_UPDATE event is
mlxsw_sp_router_netevent_event() (in
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case
of this event, it only accesses the DELAY_PROBE_TIME of the
passed neigh_parms.
Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes") Signed-off-by: Marcus Huewe <suse-tux@gmx.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Anssi Hannula [Tue, 14 Feb 2017 17:11:45 +0000 (19:11 +0200)]
net: xilinx_emaclite: fix freezes due to unordered I/O
The xilinx_emaclite uses __raw_writel and __raw_readl for register
accesses. Those functions do not imply any kind of memory barriers and
they may be reordered.
The driver does not seem to take that into account, though, and the
driver does not satisfy the ordering requirements of the hardware.
For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read()
which try to set MDIO address before initiating the transaction.
I'm seeing system freezes with the driver with GCC 5.4 and current
Linux kernels on Zynq-7000 SoC immediately when trying to use the
interface.
In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc
IO functions") the driver was switched from non-generic
in_be32/out_be32 (memory barriers, big endian) to
__raw_readl/__raw_writel (no memory barriers, native endian), so
apparently the device follows system endianness and the driver was
originally written with the assumption of memory barriers.
Rather than try to hunt for each case of missing barrier, just switch
the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending
on endianness instead.
Tested on little-endian Zynq-7000 ARM SoC FPGA.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO
functions") Signed-off-by: David S. Miller <davem@davemloft.net>
Anssi Hannula [Tue, 14 Feb 2017 17:11:44 +0000 (19:11 +0200)]
net: xilinx_emaclite: fix receive buffer overflow
xilinx_emaclite looks at the received data to try to determine the
Ethernet packet length but does not properly clamp it if
proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer
overflow and a panic via skb_panic() as the length exceeds the allocated
skb size.
Fix those cases.
Also add an additional unconditional check with WARN_ON() at the end.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller <davem@davemloft.net>
Mickaël Salaün [Sat, 11 Feb 2017 22:20:23 +0000 (23:20 +0100)]
bpf: Rebuild bpf.o for any dependency update
This is needed to force a rebuild of bpf.o when one of its dependencies
(e.g. uapi/linux/bpf.h) is updated.
Add a phony target.
Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mickaël Salaün [Sat, 11 Feb 2017 19:37:08 +0000 (20:37 +0100)]
bpf: Remove redundant ifdef
Remove a useless ifdef __NR_bpf as requested by Wang Nan.
Inline one-line static functions as it was in the bpf_sys.h file.
Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/r/828ab1ff-4dcf-53ff-c97b-074adb895006@huawei.com Acked-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 9 Feb 2017 17:10:04 +0000 (09:10 -0800)]
mlx4: do not use rwlock in fast path
Using a reader-writer lock in fast path is silly, when we can
instead use RCU or a seqlock.
For mlx4 hwstamp clock, a seqlock is the way to go, removing
two atomic operations and false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yinghai Lu [Wed, 15 Feb 2017 05:17:48 +0000 (21:17 -0800)]
PCI/PME: Restore pcie_pme_driver.remove
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make
explicitly non-modular") removed the pcie_pme_driver .remove() method,
pcie_pme_remove().
pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe().
The fact that we don't free the IRQ after d7def2040077 causes the following
crash when removing a PCIe port device via /sys:
Steffen Klassert [Wed, 15 Feb 2017 08:40:00 +0000 (09:40 +0100)]
esp: Add a software GRO codepath
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.
In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.
Steffen Klassert [Wed, 15 Feb 2017 08:39:54 +0000 (09:39 +0100)]
xfrm: Extend the sec_path for IPsec offloading
We need to keep per packet offloading informations across
the layers. So we extend the sec_path to carry these for
the input and output offload codepath.
Sahitya Tummala [Wed, 8 Feb 2017 15:00:56 +0000 (20:30 +0530)]
fuse: fix use after free issue in fuse_dev_do_read()
There is a potential race between fuse_dev_do_write()
and request_wait_answer() contexts as shown below:
TASK 1:
__fuse_request_send():
|--spin_lock(&fiq->waitq.lock);
|--queue_request();
|--spin_unlock(&fiq->waitq.lock);
|--request_wait_answer():
|--if (test_bit(FR_SENT, &req->flags))
<gets pre-empted after it is validated true>
TASK 2:
fuse_dev_do_write():
|--clears bit FR_SENT,
|--request_end():
|--sets bit FR_FINISHED
|--spin_lock(&fiq->waitq.lock);
|--list_del_init(&req->intr_entry);
|--spin_unlock(&fiq->waitq.lock);
|--fuse_put_request();
|--queue_interrupt();
<request gets queued to interrupts list>
|--wake_up_locked(&fiq->waitq);
|--wait_event_freezable();
<as FR_FINISHED is set, it returns and then
the caller frees this request>
Now, the next fuse_dev_do_read(), see interrupts list is not empty
and then calls fuse_read_interrupt() which tries to access the request
which is already free'd and gets the below crash:
[11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b
...
[11432.418518] Kernel BUG at ffffff80083720e0
[11432.456168] PC is at __list_del_entry+0x6c/0xc4
[11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474
...
[11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4
[11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474
[11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78
[11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8
[11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108
[11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94
As FR_FINISHED bit is set before deleting the intr_entry with input
queue lock in request completion path, do the testing of this flag and
queueing atomically with the same lock in queue_interrupt().
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Cc: <stable@vger.kernel.org> # 4.2+
Steffen Klassert [Wed, 15 Feb 2017 08:39:39 +0000 (09:39 +0100)]
net: Add a skb_gro_flush_final helper.
Add a skb_gro_flush_final helper to prepare for consuming
skbs in call_gro_receive. We will extend this helper to not
touch the skb if the skb is consumed by a gro callback with
a followup patch. We need this to handle the upcomming IPsec
ESP callbacks as they reinject the skb to the napi_gro_receive
asynchronous. The handler is used in all gro_receive functions
that can call the ESP gro handlers.
Ivan Khoronzhuk [Tue, 14 Feb 2017 14:02:36 +0000 (16:02 +0200)]
net: ethernet: ti: cpsw: use var instead of func for usage count
The usage count function is based on ndev_running flag that is
updated before calling ndo_open/close, but if ndo is called in
another place, as with suspend/resume, the counter is not changed,
that breaks sus/resume. For common resource no difference which
device is using it, does matter only device count. So, replace
usage count function on var and inc and dec it in ndo_open/close.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell [Mon, 13 Feb 2017 21:22:20 +0000 (08:22 +1100)]
bpf: kernel header files need to be copied into the tools directory
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 15 Feb 2017 01:11:14 +0000 (17:11 -0800)]
tcp: tcp_probe: use spin_lock_bh()
tcp_rcv_established() can now run in process context.
We need to disable BH while acquiring tcp probe spinlock,
or risk a deadlock.
Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Because of <linux/libc-compat.h> interface limitations, <netinet/in.h>
provided by libc cannot be included after <linux/in.h>, therefore any
header that includes <netinet/in.h> cannot be included after <linux/in.h>.
Change uapi/linux/l2tp.h, the last uapi header that includes
<netinet/in.h>, to include <linux/in.h> and <linux/in6.h> instead of
<netinet/in.h> and use __SOCK_SIZE__ instead of sizeof(struct sockaddr)
the same way as uapi/linux/in.h does, to fix linux/if_pppol2tp.h userspace
compilation errors like this:
In file included from /usr/include/linux/l2tp.h:12:0,
from /usr/include/linux/if_pppol2tp.h:21,
/usr/include/netinet/in.h:31:8: error: redefinition of 'struct in_addr'
Fixes: 47c3e7783be4 ("net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[media] siano: make it work again with CONFIG_VMAP_STACK
Reported as a Kaffeine bug:
https://bugs.kde.org/show_bug.cgi?id=375811
The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.
On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.
Eric Dumazet [Tue, 14 Feb 2017 17:03:51 +0000 (09:03 -0800)]
packet: fix races in fanout_add()
Multiple threads can call fanout_add() at the same time.
We need to grab fanout_mutex earlier to avoid races that could
lead to one thread freeing po->rollover that was set by another thread.
Do the same in fanout_release(), for peace of mind, and to help us
finding lockdep issues earlier.
Fixes: dc99f600698d ("packet: Add fanout support.") Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 14 Feb 2017 16:22:59 +0000 (10:22 -0600)]
ibmvnic: Fix initial MTU settings
In the current driver, the MTU is set to the maximum value
capable for the backing device. This decision turned out to
be a mistake as it led to confusion among users. The expected
initial MTU value used for other IBM vNIC capable operating
systems is 1500, with the maximum value (9000) reserved for
when Jumbo frames are enabled. This patch sets the MTU to
the default value for a net device.
It also corrects a discrepancy between MTU values received from
firmware, which includes the ethernet header length, and net
device MTU values.
Finally, it removes redundant min/max MTU assignments after device
initialization.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Tue, 14 Feb 2017 12:42:15 +0000 (14:42 +0200)]
net: ethernet: ti: cpsw: fix cpsw assignment in resume
There is a copy-paste error, which hides breaking of resume
for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev)
in suspend, but left it unchanged in resume.
Fixes: 606f39939595a4d4540406bfc11f265b2036af6d
(ti: cpsw: move platform data and slaves info to cpsw_common)
Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
bpf: reduce compiler warnings by adding fallthrough comments
Fixes the following warnings:
kernel/bpf/verifier.c: In function ‘may_access_direct_pkt_data’:
kernel/bpf/verifier.c:702:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (t == BPF_WRITE)
^
kernel/bpf/verifier.c:704:2: note: here
case BPF_PROG_TYPE_SCHED_CLS:
^~~~
kernel/bpf/verifier.c: In function ‘reg_set_min_max_inv’:
kernel/bpf/verifier.c:2057:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
true_reg->min_value = 0;
~~~~~~~~~~~~~~~~~~~~^~~
kernel/bpf/verifier.c:2058:2: note: here
case BPF_JSGT:
^~~~
kernel/bpf/verifier.c:2068:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
true_reg->min_value = 0;
~~~~~~~~~~~~~~~~~~~~^~~
kernel/bpf/verifier.c:2069:2: note: here
case BPF_JSGE:
^~~~
kernel/bpf/verifier.c: In function ‘reg_set_min_max’:
kernel/bpf/verifier.c:2009:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
false_reg->min_value = 0;
~~~~~~~~~~~~~~~~~~~~~^~~
kernel/bpf/verifier.c:2010:2: note: here
case BPF_JSGT:
^~~~
kernel/bpf/verifier.c:2019:24: warning: this statement may fall through [-Wimplicit-fallthrough=]
false_reg->min_value = 0;
~~~~~~~~~~~~~~~~~~~~~^~~
kernel/bpf/verifier.c:2020:2: note: here
case BPF_JSGE:
^~~~
Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ondrej Zary [Mon, 13 Feb 2017 22:45:47 +0000 (23:45 +0100)]
pcnet32: fix BNC/AUI port on AM79C970A
Even though the port autoselection is enabled by default on AM79C970A,
BNC/AUI port does not work because the link is always reported to be
down. The link state reported by the chip belongs only to the TP port
but the driver uses it regardless of the port used. The chip can't
detect BNC/AUI link state.
Disable port autoselection and use TP port by default to keep current
behavior (link detection works on TP port, BNC/AUI port does not work).
Implement ethtool autoneg, port and duplex configuration to allow
using the BNC/AUI port.
Report the TP link state only if the TP port is selected. When the
port autoselection is enabled or AUI port is selected, report the link
as always up.
Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid
forward declarations.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 13 Feb 2017 20:03:02 +0000 (21:03 +0100)]
mlxsw: spectrum: Change ipv6 unregistered mc table
Point back the unregister IPv6 mc table to the bc table.
It is done since IPv6 mcast snooping is not supported for Spectrum yet.
Reported-by: Jiri Pirko <jiri@mellanox.com> Fixes: 71c365bdc439 ("mlxsw: spectrum: Separate bc and mc floods") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Tested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 13 Feb 2017 19:13:16 +0000 (11:13 -0800)]
kcm: fix a null pointer dereference in kcm_sendmsg()
In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()")
I tried to avoid skb allocation for 0-length case, but missed
a check for NULL pointer in the non EOR case.
Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Feb 2017 18:04:11 +0000 (13:04 -0500)]
Merge branch 'sunvnet-driver-updates'
Shannon Nelson says:
====================
sunvnet driver updates
The sunvnet ldom virtual network driver was due for some updates and
a bugfix or two. These patches address a few items left over from
last year's make-over.
v2:
- changed memory barrier fix to use smp_wmb
- put NETIF_F_SG back into the advertised ldmvsw hw_features
v3:
- the sunvnet_common module doesn't need module_init or _exit
v4:
- dropped the statistics patch
- fixed up "default" tag for SUNVNET_COMMON
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 13 Feb 2017 18:57:04 +0000 (10:57 -0800)]
ldmvsw: disable tso and gso for bridge operations
The ldmvsw driver is specifically for supporting the ldom virtual
networking by running in the primary ldom and using the LDC to connect
the remaining ldoms to the outside world via a bridge. With TSO and GSO
supported while connected the bridge, things tend to misbehave as seen
in our case by delayed packets, enough to begin triggering retransmits
and affecting overall throughput. By turning off advertised support for
TSO and GSO we restore stable traffic flow through the bridge.
Shannon Nelson [Mon, 13 Feb 2017 18:57:02 +0000 (10:57 -0800)]
sunvnet: remove extra rcu_read_unlocks
The RCU read lock is grabbed first thing in sunvnet_start_xmit_common()
so it always needs to be released. This removes the conditional release
in the dropped packet error path and removes a couple of superfluous
calls in the middle of the code.
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 13 Feb 2017 18:57:01 +0000 (10:57 -0800)]
sunvnet: straighten up message event handling logic
The use of gotos for handling the incoming events made this code
harder to read and support than it should be. This patch straightens
out and clears up the logic.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 13 Feb 2017 18:57:00 +0000 (10:57 -0800)]
sunvnet: add memory barrier before check for tx enable
In order to allow the underlying LDC and outstanding memory operations
to potentially catch up with the driver's Tx requests, add a memory
barrier before checking again for available tx descriptors.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 13 Feb 2017 18:56:59 +0000 (10:56 -0800)]
sunvnet: update version and version printing
There have been several changes since the first version of this code, so
we bump the version number. While we're at it, we can simplify the
version printing a bit and drop a couple lines of code.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Mon, 13 Feb 2017 18:56:58 +0000 (10:56 -0800)]
sunvnet: remove unused variable in maybe_tx_wakeup
The vio_dring_state *dr variable is unused in maybe_tx_wakeup().
As the comments indicate, we call maybe_tx_wakeup() whenever we
get a STOPPED LDC message on the port. If the queue is stopped,
we want to wake it up so that we will send another START message
at the next TX and trigger the consumer to drain the dring.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 13 Feb 2017 18:56:57 +0000 (10:56 -0800)]
sunvnet: make sunvnet common code dynamically loadable
When the sunvnet_common code was split out for use by both sunvnet
and the newer ldmvsw, it was made into a static kernel library, which
limits the usefulness of sunvnet and ldmvsw as loadables, since most
of the real work is being done in the shared code. Also, this is
simply dead code in kernels that aren't running the LDoms.
This patch makes the sunvnet_common into a dynamically loadable
module and makes sunvnet and ldmvsw dependent on sunvnet_common.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
EF10 VFs only support MSI-X interrupts, not MSI or legacy. This series
stops the probe logic from trying to fallback to those if MSI-X interrupt
probe fails. It also prevents selecting them with the interrupt_mode
module parameter.
This avoids producing messages like "failed to hook legacy IRQ 0" and "IRQ
handler type mismatch for IRQ 0", and ensures that the relevant error
(from the attempt to enable MSI-X) is reported to the caller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Feb 2017 17:41:04 +0000 (12:41 -0500)]
Merge branch 'bridge-fdb-minor-cleanup'
Nikolay Aleksandrov says:
====================
bridge: minor fdb cleanup
These patches aim to simplify the bridge fdb API a little by removing some
redundant functions and converting them into wrappers of a single function.
Also add proper lock checking to avoid future mistakes for the search
functions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: fdb: converge fdb_delete_by functions into one
We can simplify the logic of entries pointing to the bridge by
converging the fdb_delete_by functions, this would allow us to use the
same function for both cases since the fdb's dst is set to NULL if it is
pointing to the bridge thus we can always check for a port match.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: fdb: converge fdb searching functions into one
Before this patch we had 3 different fdb searching functions which was
confusing. This patch reduces all of them to one - fdb_find_rcu(), and
two flavors: br_fdb_find() which requires hash_lock and br_fdb_find_rcu
which requires RCU. This makes it clear what needs to be used, we also
remove two abusers of __br_fdb_get which called it under hash_lock and
replace them with br_fdb_find().
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rui Sousa [Mon, 13 Feb 2017 02:01:25 +0000 (10:01 +0800)]
net: fec: fix multicast filtering hardware setup
Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once
to hardware
Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Feb 2017 17:13:52 +0000 (12:13 -0500)]
Merge branch 'ipv6-v4mapped'
Jonathan T. Leighton says:
====================
IPv4-mapped on wire, :: dst address issue
Under some circumstances IPv6 datagrams are sent with IPv4-mapped IPv6
addresses as the source. Given an IPv6 socket bound to an IPv4-mapped
IPv6 address, and an IPv6 destination address, both TCP and UDP will
will send packets using the IPv4-mapped IPv6 address as the source. Per
RFC 6890 (Table 20), IPv4-mapped IPv6 source addresses are not allowed
in an IP datagram. The problem can be observed by attempting to
connect() either a TCP or UDP socket, or by using sendmsg() with a UDP
socket. The patch is intended to correct this issue for all socket
types.
linux follows the BSD convention that an IPv6 destination address
specified as in6addr_any is converted to the loopback address.
Currently, neither TCP nor UDP consider the possibility that the source
address is an IPv4-mapped IPv6 address, and assume that the appropriate
loopback address is ::1. The patch adds a check on whether or not the
source address is an IPv4-mapped IPv6 address and then sets the
destination address to either ::ffff:127.0.0.1 or ::1, as appropriate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.
Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log