bcache: fixup multiple threads crash

When multiple threads to check btree nodes in parallel, the main
thread wait for all threads to stop or CACHE_SET_IO_DISABLE flag:

wait_event_interruptible(check_state->wait,
                         atomic_read(&check_state->started) == 0 ||
                         test_bit(CACHE_SET_IO_DISABLE, &c->flags));

However, the bch_btree_node_read and bch_btree_node_read_done
maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE
will be set. If the flag already set, the main thread return
error. At the same time, maybe some threads still running and
read NULL pointer, the kernel will crash.

This patch change the event wait condition, the main thread must
wait for all threads to stop.

Fixes: 8e7102273f597 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Coly Li <colyli@suse.de>

bcache: fixup bcache_dev_sectors_dirty_add() multithreaded CPU false sharing

When attaching a cached device (a.k.a backing device) to a cache
device, bch_sectors_dirty_init() is called to count dirty sectors
and stripes (see what bcache_dev_sectors_dirty_add() does) on the
cache device.

When bcache_dev_sectors_dirty_add() is called, set_bit(stripe,
d->full_dirty_stripes) or clear_bit(stripe, d->full_dirty_stripes)
operation will always be performed. In full_dirty_stripes, each 1bit
represents stripe_size (8192) sectors (512B), so 1bit=4MB (8192*512),
and each CPU cache line=64B=512bit=2048MB. When 20 threads process
a cached disk with 100G dirty data, a single thread processes about
23M at a time, and 20 threads total 460M. These full_dirty_stripes
bits corresponding to the 460M data is likely to fall in the same CPU
cache line. When one of these threads performs a set_bit or clear_bit
operation, the same CPU cache line of other threads will become invalid
and must read the full_dirty_stripes from the main memory again. Compared
with single thread, the time of a bcache_dev_sectors_dirty_add()
call is increased by about 50 times in our test (100G dirty data,
20 threads, bcache_dev_sectors_dirty_add() is called more than
20 million times).

This patch tries to test_bit before set_bit or clear_bit operation.
Therefore, a lot of force set and clear operations will be avoided,
and most of bcache_dev_sectors_dirty_add() calls will only read CPU
cache line.

Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>

floppy: use memcpy_{to,from}_bvec

Use the helpers instead of open coding them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: use bvec_kmap_local in recv_dless_read

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: use bvec_kmap_local in drbd_csum_bio

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bcache: use bvec_kmap_local in bio_csum

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvdimm-btt: use bvec_kmap_local in btt_rw_integrity

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvdimm-blk: use bvec_kmap_local in nd_blk_rw_integrity

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

zram: use memcpy_from_bvec in zram_bvec_write

Use memcpy_from_bvec instead of open coding the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

zram: use memcpy_to_bvec in zram_bvec_read

Use the proper helper instead of open coding the copy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

aoe: use bvec_kmap_local in bvcpy

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220303111905.321089-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iss-simdisk: use bvec_kmap_local in simdisk_submit_bio

Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20220303111905.321089-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-5.18-2022-03-03' of git://git.infradead.org/nvme into for-5.18/drivers

Pull NVMe updates from Christoph:

"nvme updates for Linux 5.18

 - add vectored-io support for user-passthrough (Kanchan Joshi)
 - add verbose error logging (Alan Adamson)
 - support buffered I/O on block devices in nvmet (Chaitanya Kulkarni)
 - central discovery controller support (Martin Belanger)
 - fix and extended the globally unique idenfier validation (me)
 - move away from the deprecated IDA APIs (Sagi Grimberg)
 - misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
   Chaitanya Kulkarni)"

* tag 'nvme-5.18-2022-03-03' of git://git.infradead.org/nvme: (27 commits)
  nvme: check that EUI/GUID/UUID are globally unique
  nvme: check for duplicate identifiers earlier
  nvme: fix the check for duplicate unique identifiers
  nvme: cleanup __nvme_check_ids
  nvme: remove nssa from struct nvme_ctrl
  nvme: explicitly set non-error for directives
  nvme: expose cntrltype and dctype through sysfs
  nvme: send uevent on connection up
  nvme: add vectored-io support for user-passthrough
  nvme: add verbose error logging
  nvme: add a helper to initialize connect_q
  nvme-rdma: add helpers for mapping/unmapping request
  nvmet-tcp: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvmet-rdma: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvmet-fc: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvmet: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvme-fc: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvme: replace ida_simple[get|remove] with the simler ida_[alloc|free]
  nvmet: allow bdev in buffered_io mode
  nvmet: use i_size_read() to set size for file-ns
  ...

nvme: check that EUI/GUID/UUID are globally unique

Add a check to verify that the unique identifiers are unique globally
in addition to the existing check that verifies that they are unique
inside a single subsystem.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

nvme: check for duplicate identifiers earlier

Lift the check for duplicate identifiers into nvme_init_ns_head, which
avoids pointless error unwinding in case they don't match, and also
matches where we check identifier validity for the multipath case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

nvme: fix the check for duplicate unique identifiers

nvme_subsys_check_duplicate_ids should needs to return an error if any of
the identifiers matches, not just if all of them match.  But it does not
need to and should not look at the CSI value for this sanity check.

Rewrite the logic to be separate from nvme_ns_ids_equal and optimize it
by reducing duplicate checks for non-present identifiers.

Fixes: ed754e5deeb1 ("nvme: track shared namespaces")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

nvme: cleanup __nvme_check_ids

Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

nvme: remove nssa from struct nvme_ctrl

The reported number of streams is not used outside the function that
gets it, so no need to stash it in the controller structure. Use a local
variable instead.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: explicitly set non-error for directives

Stream directives is an optional feature. It is not an error if a
controller doesn't support as many as the kernel can optionally use.
Explicitly set the non-error return value on this condition with a
comment explaining why.

Note, the return value was already 0 in this condition, so the setting
is redundant. This patch should just silence bots that falsely believe
the condition contains an error omission.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: expose cntrltype and dctype through sysfs

TP8010 introduces the Discovery Controller Type attribute (dctype).
The dctype is returned in the response to the Identify command. This
patch exposes the dctype through the sysfs. Since the dctype depends on
the Controller Type (cntrltype), another attribute of the Identify
response, the patch also exposes the cntrltype as well. The dctype will
only be displayed for discovery controllers.

A note about the naming of this attribute:
Although TP8010 calls this attribute the Discovery Controller Type,
note that the dctype is now part of the response to the Identify
command for all controller types. I/O, Discovery, and Admin controllers
all share the same Identify response PDU structure. Non-discovery
controllers as well as pre-TP8010 discovery controllers will continue
to set this field to 0 (which has always been the default for reserved
bytes). Per TP8010, the value 0 now means "Discovery controller type is
not reported" instead of "Reserved". One could argue that this
definition is correct even for non-discovery controllers, and by
extension, exposing it in the sysfs for non-discovery controllers is
appropriate.

Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: send uevent on connection up

When connectivity with a controller is lost, the driver will keep
trying to reconnect once every 10 sec. When connection is restored,
user-space apps need to be informed so that they can take proper
action. For example, TP8010 introduces the DIM PDU, which is used to
register with a discovery controller (DC). The DIM PDU is sent from
user-space.  The DIM PDU must be sent every time a connection is
established with a DC. Therefore, the kernel must tell user-space apps
when connection is restored so that registration can happen.

The uevent sent is a "change" uevent with environmental data
set to: "NVME_EVENT=connected".

Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: add vectored-io support for user-passthrough

Add a new NVME_IOCTL_IO64_CMD_VEC ioctl that works like the existing
NVME_IOCTL_IO64_CMD ioctl except that it takes and array of iovecs
and thus supports vectored I/O.

  - cmd.addr is base address of user iovec array
  - cmd.vec_cnt is count of iovec array elements

This patch does not include vectored-variant for admin-commands as most
of them are light on buffers and likely to have low invocation frequency.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: add verbose error logging

Improves logging of NVMe errors.  If NVME_VERBOSE_ERRORS is configured,
a verbose description of the error is logged, otherwise only status
codes/bits is logged.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
[kch]: fix several nits, cosmetics, and trim down code.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: add a helper to initialize connect_q

Add and use helper to remove duplicate code for fabrics connect_q
initialization and error handling for all the transports.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-rdma: add helpers for mapping/unmapping request

Introduce nvme_rdma_dma_map_req/nvme_rdma_dma_unmap_req helper functions
to improve code readability and ease on the error flow.

Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-rdma: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-fc: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fc: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: replace ida_simple[get|remove] with the simler ida_[alloc|free]

ida_simple_[get|remove] are wrappers anyways.

Also, use ida_alloc_min with the ns_ida as namespace
enumeration starts with 1.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: allow bdev in buffered_io mode

Allow block device to be configured in the buffered I/O mode by using
the file backend. In this way now we can use cache for the block
device namespace which shows significant performance improvement.

We update the block device ns enable function and return early when
buffered_io flag is set.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: use i_size_read() to set size for file-ns

Instead of calling vfs_getattr() use i_size_read() to read the size of
file so we can read the size of not only file type but also block type
with one call. This is needed to implement buffered_io support for the
NVMeOF block device backend.

We also change return type of function nvmet_file_ns_revalidate() from
int to void, since this function does not return any meaning value.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fabrics: remove unnecessary braces for case

Braces are not required for enum value NVME_SC_CONNECT_INVALID_PARAM
when used on the switch-case statement, remove the braces.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fabrics: use consistent zeroout pattern

Remove zeroout memeset call & zeroout local variable cmd at the time
of declaration in nvmf_ref_read32() similar to what we have done in
nvmf_reg_read64(), nvmf_reg_write32(), nvmf_connect_admin_queue(), and
nvmf_connect_io_queue().

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fabrics: use unsigned int type

Loop variable i will never have a negative value, so use
unsigned int type instaed of int.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fabrics: use unsigned int type

Loop variable i will never have a negative value, so use
unsigned int type instaed of int.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-core: remove unnecessary function parameter

In function nvme_execute_rq() we don't use gendisk parameter at all.
Remove the unsed parameter and adjust the calls.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-core: remove unnecessary semicolon

It is not a good practice to have a semicolon at the end of the
function definition. Remove it from nvme_pr_type().

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fc: fix a typo

subsytem -> subsystem

Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

null_blk: null_alloc_page() cleanup

Remove goto labels and use direct returns as error unwinding code only
needs to free t_page variable if we alloc_pages() call fails as having
two labels for one kfree() can be avoided easily.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220222152852.26043-3-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: remove hardcoded null_alloc_page() param

Only caller of null_alloc_page() is null_insert_page() unconditionally
sets only parameter to GFP_NOIO and that is statically hard-coded in
null_blk. There is no point in having statically hardcoded function
parameter.

Remove the unnecessary parameter gfp_flags and adjust the code, so it
can retain existing behavior null_alloc_page() with GFP_NOIO.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220222152852.26043-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: remove hardcoded alloc_cmd() parameter

Only caller of alloc_cmd() is null_submit_bio() unconditionally sets
second parameter to true and that is statically hard-coded in null_blk.
There is no point in having statically hardcoded function parameter.

Remove the unnecessary parameter can_wait and adjust the code so it
can retain existing behavior of waiting when we don't get valid
nullb_cmd from __alloc_cmd() in alloc_cmd().

The restructured code avoids multiple return statements, multiple
calls to __alloc_cmd() and resulting a fast path call to
prepare_to_wait() due to removal of first alloc_cmd() call.

Follow the pattern that we have in bio_alloc() to set the structure
members in the structure allocation function in alloc_cmd() and pass
bio to initialize newly allocated cmd->bio member.

Follow the pattern in copy_to_nullb() to use result of one function call
(null_cache_active()) to be used as a parameter to another function call
(null_insert_page()), use result of alloc_cmd() as a first parameter to
the null_handle_cmd() in null_submit_bio() function. This allow us to
remove the local variable cmd on stack in null_submit_bio() that is in
fast path.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220216172945.31124-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: allow user to set the queue depth

Instead of hardcoding queue depth allow user to set the hw queue depth
using module parameter. Set default value to 128 to retain the existing
behavior.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-5-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: remove extra variable in lo_req_flush

The local variable file is used to pass it to the vfs_fsync(). We can
get away with using lo->lo_backing_file instead of storing in a local
variable which is not used anywhere else.

No functional change in this patch.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-4-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: remove extra variable in lo_fallocate()

The local variable q is used to pass it to the blk_queue_discard(). We
can get away with using lo->lo_queue instead of storing in a local
variable which is not used anywhere else.

No functional change in this patch.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-3-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: use sysfs_emit() in the sysfs xxx show()

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: fix return value from null_add_dev()

The function nullb_device_power_store() returns -ENOMEM when
null_add_dev() fails. null_add_dev() can fail with return value
other than -ENOMEM such as -EINVAL when Zoned Block Device option
is used, see :

nullb_device_power_store()
 null_add_dev()
  null_init_zoned_dev()
return -EINVAL;

When trying to load the module having -ENOMEM value returned on the
command line creates confusion when pleanty of memory is free on the
machine.

Instead of hardcoding -ENOMEM return the value of null_add_dev()
function.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220215115951.15945-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: clean up grammar in warning message

The phrase "has still" should be "still has" to clean up the grammar.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220208114656.61629-1-colin.i.king@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/rnbd: Remove a useless mutex

According to lib/idr.c,
   The IDA handles its own locking.  It is safe to call any of the IDA
   functions without synchronisation in your code.

so the 'ida_lock' mutex can just be removed.
It is here only to protect some ida_simple_get()/ida_simple_remove() calls.

While at it, switch to ida_alloc_XXX()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/7f9eccd8b1fce1bac45ac9b01a78cf72f54c0a61.1644266862.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/rnbd: client device does not care queue/rotational

On client side, the device is a network device. There is no reason
to set rotational even-if the target device on server is rotational.

Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220114155855.984144-3-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/rnbd-clt: fix CHECK:BRACES warning

This patch fix the "CHECK:BRACES: braces {} should be used on all
arms of this statement" warning from checkpatch

Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://lore.kernel.org/r/20220114155855.984144-2-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: default BLOCK_LEGACY_AUTOLOAD to y

As Luis reported, losetup currently doesn't properly create the loop
device without this if the device node already exists because old
scripts created it manually.  So default to y for now and remove the
aggressive removal schedule.

Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220225181440.1351591-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: update io_ticks when io hang

When the inflight IOs are slow and no new IOs are issued, we expect
iostat could manifest the IO hang problem. However after
commit 5b18b5a73760 ("block: delete part_round_stats and switch to less
precise counting"), io_tick and time_in_queue will not be updated until
the end of IO, and the avgqu-sz and %util columns of iostat will be zero.

Because it has using stat.nsecs accumulation to express time_in_queue
which is not suitable to change, and may %util will express the status
better when io hang occur. To fix io_ticks, we use update_io_ticks and
inflight to update io_ticks when diskstats_show and part_stat_show
been called.

Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220217064247.4041435-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: don't move oom_bfqq

Our test report a UAF:

[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203]  dump_backtrace+0x0/0x310
[ 2073.019206]  show_stack+0x28/0x38
[ 2073.019210]  dump_stack+0xec/0x15c
[ 2073.019216]  print_address_description+0x68/0x2d0
[ 2073.019220]  kasan_report+0x238/0x2f0
[ 2073.019224]  __asan_store8+0x88/0xb0
[ 2073.019229]  __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233]  bfq_put_async_queues+0xbc/0x208
[ 2073.019236]  bfq_pd_offline+0x178/0x238
[ 2073.019240]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244]  bfq_exit_queue+0x128/0x178
[ 2073.019249]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019252]  elevator_exit+0xc8/0xd0
[ 2073.019256]  blk_exit_queue+0x50/0x88
[ 2073.019259]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019267]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274]  null_exit+0x90/0x114 [null_blk]
[ 2073.019278]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282]  el0_svc_common+0xc8/0x320
[ 2073.019287]  el0_svc_handler+0xf8/0x160
[ 2073.019290]  el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301]  kasan_kmalloc+0xe0/0x190
[ 2073.019305]  kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308]  bfq_pd_alloc+0x54/0x118
[ 2073.019313]  blkcg_activate_policy+0x250/0x460
[ 2073.019317]  bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321]  bfq_init_queue+0x6d0/0x948
[ 2073.019325]  blk_mq_init_sched+0x1d8/0x390
[ 2073.019330]  elevator_switch_mq+0x88/0x170
[ 2073.019334]  elevator_switch+0x140/0x270
[ 2073.019338]  elv_iosched_store+0x1a4/0x2a0
[ 2073.019342]  queue_attr_store+0x90/0xe0
[ 2073.019348]  sysfs_kf_write+0xa8/0xe8
[ 2073.019351]  kernfs_fop_write+0x1f8/0x378
[ 2073.019359]  __vfs_write+0xe0/0x360
[ 2073.019363]  vfs_write+0xf0/0x270
[ 2073.019367]  ksys_write+0xdc/0x1b8
[ 2073.019371]  __arm64_sys_write+0x50/0x60
[ 2073.019375]  el0_svc_common+0xc8/0x320
[ 2073.019380]  el0_svc_handler+0xf8/0x160
[ 2073.019383]  el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391]  __kasan_slab_free+0x120/0x228
[ 2073.019394]  kasan_slab_free+0x10/0x18
[ 2073.019397]  kfree+0x94/0x368
[ 2073.019400]  bfqg_put+0x64/0xb0
[ 2073.019404]  bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408]  bfq_put_queue+0x220/0x228
[ 2073.019413]  __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416]  bfq_put_async_queues+0xbc/0x208
[ 2073.019420]  bfq_pd_offline+0x178/0x238
[ 2073.019424]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429]  bfq_exit_queue+0x128/0x178
[ 2073.019433]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019437]  elevator_exit+0xc8/0xd0
[ 2073.019440]  blk_exit_queue+0x50/0x88
[ 2073.019443]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019451]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459]  null_exit+0x90/0x114 [null_blk]
[ 2073.019462]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467]  el0_svc_common+0xc8/0x320
[ 2073.019471]  el0_svc_handler+0xf8/0x160
[ 2073.019474]  el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
 which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420]  ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424]  ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430]                                   ^
[ 2073.020434]  ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438]  ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================

The same problem exist in mainline as well.

This is because oom_bfqq is moved to a non-root group, thus root_group
is freed earlier.

Thus fix the problem by don't move oom_bfqq.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: avoid moving bfqq to it's parent bfqg

Moving bfqq to it's parent bfqg is pointless.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220129015924.3958918-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: cleanup bfq_bfqq_to_bfqg()

Use bfq_group() instead, which do the same thing.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220129015924.3958918-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/bfq_wf2q: correct weight to ioprio

The return value is ioprio * BFQ_WEIGHT_CONVERSION_COEFF or 0.
What we want is ioprio or 0.
Correct this by changing the calculation.

Signed-off-by: Yahu Gao <gaoyahu19@gmail.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220107065859.25689-1-gaoyahu19@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: avoid extending delays of active hctx from blk_mq_delay_run_hw_queues

When blk_mq_delay_run_hw_queues sets an hctx to run in the future, it can
reset the delay length for an already pending delayed work run_work. This
creates a scenario where multiple hctx may have their queues set to run,
but if one runs first and finds nothing to do, it can reset the delay of
another hctx and stall the other hctx's ability to run requests.

To avoid this I/O stall when an hctx's run_work is already pending,
leave it untouched to run at its current designated time rather than
extending its delay. The work will still run which keeps closed the race
calling blk_mq_delay_run_hw_queues is needed for while also avoiding the
I/O stall.

Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220131203337.GA17666@redhat
Signed-off-by: Jens Axboe <axboe@kernel.dk>

virtio_blk: simplify refcounting

Implement the ->free_disk method to free the virtio_blk structure only
once the last gendisk reference goes away instead of keeping a local
refcount.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220215094514.3828912-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

memstick/mspro_block: simplify refcounting

Implement the ->free_disk method to free the msb_data structure only once
the last gendisk reference goes away instead of keeping a local
refcount.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220215094514.3828912-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

memstick/mspro_block: fix handling of read-only devices

Use set_disk_ro to propagate the read-only state to the block layer
instead of checking for it in ->open and leaking a reference in case
of a read-only device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220215094514.3828912-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

memstick/ms_block: simplify refcounting

Implement the ->free_disk method to free the msb_data structure only once
the last gendisk reference goes away instead of keeping a local refcount.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220215094514.3828912-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a ->free_disk method

Add a method to notify the driver that the gendisk is about to be freed.
This allows drivers to tie the lifetime of their private data to that of
the gendisk and thus deal with device removal races without expensive
synchronization and boilerplate code.

A new flag is added so that ->free_disk is only called after a successful
call to add_disk, which significantly simplifies the error handling path
during probing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220215094514.3828912-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: revert 4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large IO scenarios")

Revert commit 4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large
IO scenarios") since we have another easier way to address this issue and
get better iops throttling result.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: don't try to throttle split bio if iops limit isn't set

We need to throttle split bio in case of IOPS limit even though the
split bio has been marked as BIO_THROTTLED since block layer
accounts split bio actually.

If only throughput throttle is setup, no need to throttle any more
if BIO_THROTTLED is set since we have accounted & considered the
whole bio bytes already.

Add one flag of THROTL_TG_HAS_IOPS_LIMIT for serving this purpose.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: throttle split bio in case of iops limit

Commit 111be8839817 ("block-throttle: avoid double charge") marks bio as
BIO_THROTTLED unconditionally if __blk_throtl_bio() is called on this bio,
then this bio won't be called into __blk_throtl_bio() any more. This way
is to avoid double charge in case of bio splitting. It is reasonable for
read/write throughput limit, but not reasonable for IOPS limit because
block layer provides io accounting against split bio.

Chunguang Xu has already observed this issue and fixed it in commit
4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large IO scenarios").
However, that patch only covers bio splitting in __blk_queue_split(), and
we have other kind of bio splitting, such as bio_split() &
submit_bio_noacct() and other ways.

This patch tries to fix the issue in one generic way by always charging
the bio for iops limit in blk_throtl_bio(). This way is reasonable:
re-submission & fast-cloned bio is charged if it is submitted to same
disk/queue, and BIO_THROTTLED will be cleared if bio->bi_bdev is changed.

This new approach can get much more smooth/stable iops limit compared with
commit 4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large IO
scenarios") since that commit can't throttle current split bios actually.

Also this way won't cause new double bio iops charge in
blk_throtl_dispatch_work_fn() in which blk_throtl_bio() won't be called
any more.

Reported-by: Ning Li <lining2020x@163.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: merge submit_bio_checks() into submit_bio_noacct

Now submit_bio_checks() is only called by submit_bio_noacct(), so merge
it into submit_bio_noacct().

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: don't check bio in blk_throtl_dispatch_work_fn

The bio has been checked already before throttling, so no need to check
it again before dispatching it from throttle queue.

Add a helper of submit_bio_noacct_nocheck() for this purpose.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220216044514.2903784-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: don't declare submit_bio_checks in local header

submit_bio_checks() won't be called outside of block/blk-core.c any more
since commit 9d497e2941c3 ("block: don't protect submit_bio_checks by
q_usage_counter"), so mark it as one local helper.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move blk_crypto_bio_prep() out of blk-mq.c

blk_crypto_bio_prep() is called for both bio based and blk-mq drivers,
so move it out of blk-mq.c, then we can unify this kind of handling.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move submit_bio_checks() into submit_bio_noacct

It is more clean & readable to check bio when starting to submit it,
instead of just before calling ->submit_bio() or blk_mq_submit_bio().

Also it provides us chance to optimize bio submission without checking
bio.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove dm_dispatch_clone_request

Fold dm_dispatch_clone_request into it's only caller, and use a switch
statement to single dispatch for the handling of the different return
values from blk_insert_cloned_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove useless code from dm_dispatch_clone_request

Both ->start_time_ns and the RQF_IO_STAT are set when the request is
allocated using blk_mq_alloc_request by dm-mpath in blk_mq_rq_ctx_init.
The block layer also ensures ->start_time_ns is only set when actually
needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove the request_queue argument to blk_insert_cloned_request

The request must be submitted to the queue it was allocated for, so
remove the extra request_queue argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold blk_cloned_rq_check_limits into blk_insert_cloned_request

Fold blk_cloned_rq_check_limits into its only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: make the blk-mq stacking code optional

The code to stack blk-mq drivers is only used by dm-multipath, and
will preferably stay that way.  Make it optional and only selected
by device mapper, so that the buildbots more easily catch abuses
like the one that slipped in in the ufs driver in the last merged
window.  Another positive side effects is that kernel builds without
device mapper shrink a little bit as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: set blkg iostat after percpu stat aggregation

Don't need to do blkg_iostat_set for top blkg iostat on each CPU,
so move it after percpu stat aggregation.

Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220213085902.88884-1-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-lib: don't check bdev_get_queue() NULL check

Based on the comment present in the bdev_get_queue()
bdev->bd_queue can never be NULL. Remove the NULL check for the local
variable q that is set from bdev_get_queue() for discard, write_same,
and write_zeroes.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220215115247.11717-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove biodoc.rst

This document is completely out of date and extremely misleading. In
general the existing kerneldoc comment serve as a much better
documentation of the still existing functionality, while the history
blurbs are pretty much irrelevant today.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220215081047.3693582-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

docs: block: biodoc.rst: Drop the obsolete and incorrect content

Since commit 7eaceaccab5f ("block: remove per-queue plugging"), kernel
has removed blk_run_address_space(), blk_unplug() and sync_buffer(),
and moved to on-stack plugging. The document has been obsolete for
years.
Given that there is no obvious counterparts in the new mechinism to
replace old APIs, this patch drops the content directly.

Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20220207074931.20067-1-song.bao.hua@hisilicon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: partition include/linux/blk-cgroup.h

Partition include/linux/blk-cgroup.h into two parts: one is public part,
the other is block layer private part.

Suggested by Christoph Hellwig.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220211101149.2368042-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move initialization of q->blkg_list into blkcg_init_queue

q->blkg_list is only used by blkcg code, so move it into
blkcg_init_queue.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220211101149.2368042-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove THROTL_IOPS_MAX

No one uses THROTL_IOPS_MAX any more, so remove it.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220211101149.2368042-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: introduce block_rq_error tracepoint

Currently, rasdaemon uses the existing tracepoint block_rq_complete
and filters out non-error cases in order to capture block disk errors.

But there are a few problems with this approach:

1. Even kernel trace filter could do the filtering work, there is
   still some overhead after we enable this tracepoint.

2. The filter is merely based on errno, which does not align with kernel
   logic to check the errors for print_req_error().

3. block_rq_complete only provides dev major and minor to identify
   the block device, it is not convenient to use in user-space.

So introduce a new tracepoint block_rq_error just for the error case.
With this patch, rasdaemon could switch to block_rq_error.

Since the new tracepoint has the similar implementation with
block_rq_complete, so move the existing code from TRACE_EVENT
block_rq_complete() into new event class block_rq_completion(). Then add
event for block_rq_complete and block_rq_err respectively from the newly
created event class per the suggestion from Chaitanya Kulkarni.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220210225222.260069-1-shy828301@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sbitmap: Delete old sbitmap_queue_get_shallow()

Since __sbitmap_queue_get_shallow() was introduced in commit c05e66733788
("sbitmap: add sbitmap_get_shallow() operation"), it has not been used.

Delete __sbitmap_queue_get_shallow() and rename public
__sbitmap_queue_get_shallow() -> sbitmap_queue_get_shallow() as it is odd
to have public __foo but no foo at all.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1644322024-105340-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

lib/sbitmap: kill 'depth' from sbitmap_word

Only the last sbitmap_word can have different depth, and all the others
must have same depth of 1U << sb->shift, so not necessary to store it in
sbitmap_word, and it can be retrieved easily and efficiently by adding
one internal helper of __map_depth(sb, index).

Remove 'depth' field from sbitmap_word, then the annotation of
____cacheline_aligned_in_smp for 'word' isn't needed any more.

Not see performance effect when running high parallel IOPS test on
null_blk.

This way saves us one cacheline(usually 64 words) per each sbitmap_word.

Cc: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220110072945.347535-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a block_device to bio_clone_fast

Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: initialize the target bio in __bio_clone_fast

All callers of __bio_clone_fast initialize the bio first.  Move that
initialization into __bio_clone_fast instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: use bio_clone_fast in alloc_io/alloc_tio

Replace open coded bio_clone_fast implementations with the actual helper.
Note that the bio allocated as part of the dm_io structure in alloc_io
will only actually be used later in alloc_tio, making this earlier
cloning of the information safe.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: clone crypto and integrity data in __bio_clone_fast

__bio_clone_fast should also clone integrity and crypto data, as a clone
without those is incomplete.  Right now the only caller that can actually
support crypto and integrity data (dm) does it manually for the one
callchain that supports these, but we better do it properly in the core.

Note that all callers except for the above mentioned one also don't need
to handle failure at all, given that the integrity and crypto clones are
based on mempool allocations that won't fail for sleeping allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm-cache: remove __remap_to_origin_clear_discard

Fold __remap_to_origin_clear_discard into the two callers to prepare
for bio cloning refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: simplify the single bio fast path in __send_duplicate_bios

Most targets just need a single flush bio.  Open code that case in
__send_duplicate_bios without the need to add the bio to a list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: retun the clone bio from alloc_tio

Return the clone bio embedded into the tio as that is what the callers
actually want.  Similar for the free side.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: pass the bio instead of tio to __map_bio

This simplifies the callers a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: move cloning the bio into alloc_tio

Move the call to __bio_clone_fast and the assignment of ->len_ptr from
the callers into alloc_tio to prepare for changes to the bio clone API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fold __send_duplicate_bios into __clone_and_map_simple_bio

Fold __send_duplicate_bios into its only caller to prepare for
refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fold clone_bio into __clone_and_map_data_bio

Fold clone_bio into its only caller to prepare for refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: add a clone_to_tio helper

Add a helper to stop open coding the container_of operations to get
from the clone bio to the tio structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: set ->bi_bdev in drbd_req_new

Make sure the newly allocated bio has the correct bi_bdev set from the
start.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>