anlan_cs [Mon, 31 Jan 2022 00:44:35 +0000 (19:44 -0500)]
zebra: let /32 host route with same IP cross VRF
Contraints of host routes are too strict in current code:
Host routes with same destination address and nexthop address are forbidden
even when cross VRFs.
Currently host routes with different destination and nexthop address can cross
VRFs, it is ok. But host routes with same addresses are forbidden to cross VRFs,
it is wrong.
Since different VRFs can have the same addresses, leak specific host route with
the same nexthop address ( it means destination address is same to nexthop
address ) to other VRFs is a normal case.
This commit relaxes that contraints. Host routes with same destination address
and nexthop address are forbidden only when not cross VRFs.
anlan_cs [Mon, 7 Feb 2022 04:53:45 +0000 (23:53 -0500)]
zebra: remove unnecessary assignment
In `zebra_evpn_neigh_gw_macip_add()`, it sets `mac->flags` to "ZEBRA_MAC_DEF_GW"
for "advertise-default-gw" mode. But this set is redundant because this "mac"
is already set by `zebra_evpn_mac_gw_macip_add()`.
Added this api to fill all multicast group address based on IP version.
For PIMv4 its 224.0.0.0/4, for PIMv6 its FF00::0/8.
Changed the code where its being used currently.
pim6d: Modify pim_*_cmd_worker api passing pim_addr parameter
Pass pim_addr as parameter for rp address to accomodate ipv6.
Modifying pim_rp_cmd_worker and pim_no_rp_cmd_worker function
parameters from in_addr to pim_addr.
Changes in the caller functions are done as well to make it work
for IPv6.
pim6d: Return type and parameter changes for api pim_rp_del_config
1. Return value of this function pim_rp_del_config is nowhere used.
So made it as a void function.
2. Paramater const char *rp is first converted to string from prefix
in the caller and then back to prefix in this api pim_rp_del_config.
Fixed it by directly passing the address instead of string.
David Lamparter [Mon, 7 Mar 2022 16:34:17 +0000 (17:34 +0100)]
lib, vtysh: report lost messages on live log
The vtysh live logs don't try to buffer messages when vtysh isn't
reading them fast enough. Either the kernel has space and can accept
messages without delay, or it doesn't and we continue on.
While this is intentional (otherwise slow vtysh could block a routing
daemon), at least give the user an indication if messages were dropped.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modified the bgp_clear_stale_route function to have
better indentation, but in the process changed some
`continue;` statements to `break;` which modified
the looping and caused stale paths to not always be
removed upon an update.
To reproduce: A ---- B, setup with addpath and GR
One side has a prefix with nhop1 and nhop2, kill one
side and then resend the same prefix with nhop3,
paths nhop1 and 2 become stale and never removed.
Code inspection clearly shows that that `continue`
statements became `break` statements causing the
loop over all paths to stop prematurely.
The fix is to change the break back to continue
statements so the loop can continue instead of
stopping.
David Lamparter [Sat, 5 Mar 2022 18:39:53 +0000 (19:39 +0100)]
lib: fix log target removal when singlethreaded
While running singlethreaded, the RCU code is "dormant" and rcu_free is
an immediate operation. This results in the log target loop accessing
free'd memory if a log target removes itself while a message is printed
(which is likely to happen on e.g. error conditions.)
Just use frr_each_safe to avoid this issue.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Mon, 7 Mar 2022 13:00:26 +0000 (08:00 -0500)]
bgpd: Warn user when an interface has no v6 LL address associated with it
When BGP detects that a peering is using a global address but no v6 LL
address has been created for the interface that the global address is
on warn the user that something is amiss and they need to fix it.
Rafael Zalamena [Mon, 21 Feb 2022 11:28:11 +0000 (06:28 -0500)]
lib: tweak northbound gRPC default timeout
Don't let open sockets hang for too long. This will fix an issue where a
improperly coded client (e.g. socat) could exaust the amount of open
file descriptors.
lib: Route-map failed for OSPF routes even for matching prefixes
This issue is applicable to other protocols as well.
When user has used route-map, even though the prefixes are falling
under the permit rule, the prefixes were denied and were shown
as inactive route in zebra.
Reason being the parameter which is of type enum was passed to the api
route_map_get_index and was typecasted to uint8_t *.
This problem is visible in case of Big Endian systems because we are
accessing the most significant byte.
'match_ret' field is an enum in the caller and so it is of 4 bytes,
the typecasting it to 1 byte and passing it to the api made
the api to put the value in the most significant byte
which was already zero previously. Therefore the actual value
RMAP_NOMATCH which was 1 never gets reset in this case.
Therefore the api always returns 'RMAP_NOMATCH' and hence
the prefixes are always denied.
Chirag Shah [Thu, 4 Jun 2020 16:41:31 +0000 (09:41 -0700)]
zebra: fix crash in evpn neigh cleanup all
zebra crash is seen during shutdown (frr restart).
During shutdown, remote neigh and remote mac clean up
is triggered first, followed by per vni all neigh
(including local) and macs cleanup is triggered.
The crash occurs when a remote mac is cleaned up first
and its reference is remained in local neigh.
When local neigh attempt removes itself from its associated
mac's neigh_list it triggers inaccessible memory crash.
The fix is during mac deletion if its neigh_list is non-empty
then retain the MAC in AUTO state.
This can arise when MAC and neigh duo are in different state
(remote/local). Otherwise, the order of cleanup operation
is neighs followed by macs.
The auto mac will be cleaned up when per vni all neighs and macs
are cleaned up.
Donald Sharp [Fri, 2 Oct 2020 18:49:09 +0000 (14:49 -0400)]
zebra: Prevent installation of connected multiple times
With recent changes to interface up mechanics in if_netlink.c
FRR was receiving as many as 4 up events for an interface
on ifdown/ifup events. This was causing timing issues
in FRR based upon some fun timings. Remove this from
happening.
Ticket: CM-31623 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Chirag Shah [Thu, 28 May 2020 18:40:29 +0000 (11:40 -0700)]
zebra: handle protodown netlink for vxlan device
Frr need to handle protocol down event for vxlan
interface.
In MLAG scenario, one of the pair switch can put
vxlan port to protodown state, followed by
tunnel-ip change from anycast IP to individual IP.
In absence of protodown handling, evpn end up
advertising locally learn EVPN (MAC-IP) routes
with individual IP as nexthop.
This leads an issue of overwriting locally learn
entries as remote on MLAG pair.
In EVPN deployment, restart one of the MLAG
daemon, which puts vxlan interfaces in protodown state.
FRR treats protodown as oper down for vxlan interfaces.
VNI down cleans up/withdraws locally learn routes.
Followed by vxlan device UP event, re-advertise
locally learn routes.
projects / mirror_frr.git / log