]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
11 years agoperf/x86: Fix PMU detection printout when no PMU is detected
Ingo Molnar [Sat, 28 Sep 2013 13:48:48 +0000 (15:48 +0200)]
perf/x86: Fix PMU detection printout when no PMU is detected

Ran into this cryptic PMU bootup log recently:

[    0.124047] Performance Events:
[    0.125000] smpboot: ...

Turns out we print this if no PMU is detected. Fall back to
the right condition so that the following is printed:

[    0.122381] Performance Events: no PMU driver, software events only.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-u2fwaUffakjp0qkpRfqljgsn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Wed, 25 Sep 2013 18:27:17 +0000 (20:27 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * It was possible to use an uninitialized buffer when reading
   kernel modules information and checking if the file was a
   /proc/sys/kernel/kptr_restrict'ed one, fix for this from
   Adrian Hunter.

 * The libbfd demangler doesn't handle cloned functions (e.g. symbol.clone.NUM),
   feed it unsuffixed symbol names, workaround from Andi Kleen.

 * Fix segfault in 'perf trace' when processing perf.data files with PERF_RECORD_MMAP2
   records, recently added but not handled in this tool, from David Ahern.

 * Fix libdl related build in old systems like Fedora 12, from David Ahern.

 * Make 'perf kmem' work again on non NUMA machines, fix from Jiri Olsa.

 * Fix probing symbols with optimization suffix in 'perf probe' where some
   operations that are entirely user level and involves vmlinux/DWARF were working
   but when the symbol name was fed to the kprobes tracer, the in kernel code
   would use /proc/kallsyms where the name had the suffix, from Masami Hiramatsu.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoperf symbols: Demangle cloned functions
Andi Kleen [Thu, 12 Sep 2013 15:16:38 +0000 (08:16 -0700)]
perf symbols: Demangle cloned functions

The libbfd C++ demangler doesn't seem to deal with cloned functions,
like symbol.clone.NUM.

Just strip the dot part before demangling and add it back later.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1378998998-10802-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf machine: Fix path unpopulated in machine__create_modules()
Adrian Hunter [Sun, 22 Sep 2013 10:22:09 +0000 (13:22 +0300)]
perf machine: Fix path unpopulated in machine__create_modules()

In machine__create_modules() the 'path' char array was used in a call to
symbol__restricted_filename() without always being populated.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379845338-29637-2-git-send-email-adrian.hunter@intel.com
[ Split patch removing unrelated conversion of sprintf to snprintf to perf/core ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Explicitly add libdl dependency
David Ahern [Mon, 23 Sep 2013 01:44:57 +0000 (19:44 -0600)]
perf tools: Explicitly add libdl dependency

Fixes compile failure on Fedora 12.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1379900700-5186-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf probe: Fix probing symbols with optimization suffix
Masami Hiramatsu [Wed, 25 Sep 2013 13:16:16 +0000 (22:16 +0900)]
perf probe: Fix probing symbols with optimization suffix

Fix perf probe to probe on some symbols which have some optimzation
suffixes, e.g. ".part", ".isra", and ".constprop".

To fix this issue, instead of using the DIE name, perf probe uses the
symbol name found by dwfl_module_addrsym().

This also involves a perf probe --vars operation update which now shows
the symbol name instead of the DIE name.

Without this patch, putting a probe on an inlined function which was
compiled with a suffixed symbol will fail like this:

  $ perf probe -v getname_flags
  probe-definition(0): getname_flags
  symbol:getname_flags file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (6 entries long)
  Using /lib/modules/3.11.0+/build/vmlinux for symbols
  found inline addr: 0xffffffff8119bb70
  Probe point found: getname_flags+0
  found inline addr: 0xffffffff8119bcb6
  Probe point found: getname+6
  found inline addr: 0xffffffff811a06a6
  Probe point found: user_path_at_empty+6
  find 3 probe_trace_events.
  Opening /sys/kernel/debug//tracing/kprobe_events write=1
  Added new events:
  Writing event: p:probe/getname_flags getname_flags+0
  Failed to write event: No such file or directory
    Error: Failed to add events. (-1)

Because the debuginfo knows only the original (non suffix) symbol name,
it uses the original symbol for probe address but the kernel (kallsyms)
knows only suffixed symbol.  Then, the kernel rejects that original
symbol.

This patch uses dwfl_module_addrsym() to get the correct (suffixed)
symbol from symtab when a probe point is found.

Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130925131616.31632.46658.stgit@udc4-manage.rcp.hitachi.co.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf trace: Add mmap2 handler
David Ahern [Mon, 23 Sep 2013 01:44:58 +0000 (19:44 -0600)]
perf trace: Add mmap2 handler

5c5e854b changed perf_event__synthesize_mmap_events to generate MMAP2
events. Since perf-trace does not have a handler for it it dies with a
segfault when trying to process files:

perf trace -i /tmp/perf.data
Segmentation fault

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1379900700-5186-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf kmem: Make it work again on non NUMA machines
Jiri Olsa [Thu, 12 Sep 2013 16:39:36 +0000 (18:39 +0200)]
perf kmem: Make it work again on non NUMA machines

The commit '2814eb0 perf kmem: Remove die() calls' disabled 'perf kmem'
command for machines without numa support. It made the command fail if
'/sys/devices/system/node' dir wasn't found.

Skipping the numa based initialization in case the directory is not
found and continue execution.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379003976-5839-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf/x86/intel: Add model number for Avoton Silvermont
Yan, Zheng [Sun, 22 Sep 2013 08:19:13 +0000 (16:19 +0800)]
perf/x86/intel: Add model number for Avoton Silvermont

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Cc: a.p.zijlstra@chello.nl
Cc: eranian@google.com
Cc: ak@linux.intel.com
Link: http://lkml.kernel.org/r/1379837953-17755-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoperf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page'
Peter Zijlstra [Thu, 19 Sep 2013 08:16:42 +0000 (10:16 +0200)]
perf: Fix capabilities bitfield compatibility in 'struct perf_event_mmap_page'

Solve the problems around the broken definition of perf_event_mmap_page::
cap_usr_time and cap_usr_rdpmc fields which used to overlap, partially
fixed by:

  860f085b74e9 ("perf: Fix broken union in 'struct perf_event_mmap_page'")

The problem with the fix (merged in v3.12-rc1 and not yet released
officially), noticed by Vince Weaver is that the new behavior is
not detectable by new user-space, and that due to the reuse of the
field names it's easy to mis-compile a binary if old headers are used
on a new kernel or new headers are used on an old kernel.

To solve all that make this change explicit, detectable and self-contained,
by iterating the ABI the following way:

 - Always clear bit 0, and rename it to usrpage->cap_bit0, to at least not
   confuse old user-space binaries. RDPMC will be marked as unavailable
   to old binaries but that's within the ABI, this is a capability bit.

 - Rename bit 1 to ->cap_bit0_is_deprecated and always set it to 1, so new
   libraries can reliably detect that bit 0 is deprecated and perma-zero
   without having to check the kernel version.

 - Use bits 2, 3, 4 for the newly defined, correct functionality:

cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */
cap_user_time : 1, /* The time_* fields are used */
cap_user_time_zero : 1, /* The time_zero field is used */

 - Rename all the bitfield names in perf_event.h to be different from the
   old names, to make sure it's not possible to mis-compile it
   accidentally with old assumptions.

The 'size' field can then be used in the future to add new fields and it
will act as a natural ABI version indicator as well.

Also adjust tools/perf/ userspace for the new definitions, noticed by
Adrian Hunter.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Also-Fixed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/n/tip-zr03yxjrpXesOzzupszqglbv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoperf/x86/intel/uncore: Don't use smp_processor_id() in validate_group()
Yan, Zheng [Tue, 17 Sep 2013 06:48:13 +0000 (14:48 +0800)]
perf/x86/intel/uncore: Don't use smp_processor_id() in validate_group()

uncore_validate_group() can't call smp_processor_id() because it is
in preemptible context. Pass NUMA_NO_NODE to the allocator instead.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379400493-11505-1-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoperf: Update ABI comment
Peter Zijlstra [Fri, 13 Sep 2013 21:39:17 +0000 (23:39 +0200)]
perf: Update ABI comment

For some mysterious reason the sample_id field of PERF_RECORD_MMAP went AWOL.

Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 20 Sep 2013 04:47:39 +0000 (06:47 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * Check for SIGINT in more loops, allowing tools such as 'perf report' to
   react faster to Ctrl+C, from Arnaldo Carvalho de Melo.

 * Fix objdump line parsing offset validation in the annotate code,
   from Adrian Hunter.

 * Fix buildid cache handling of kallsyms with kcore, from Adrian Hunter.

 * Fix compile with libelf without get_phdrnum, from Adrian Hunter.

 * Sharpen the libaudit dependencies test, refusing to build with older
   libraries that doesn't have all the functions used by 'perf trace", fix
   from Ingo Molnar.

 * Fill in new definitions for madvise()/mmap() flags to fix the build in
   older systems, from Ingo Molnar.

 * Fix old GCC build error in older systems in the kallsyms parsing code in
   trace-event-parse.c, from Ingo Molnar.

 * Ignore DWARF declaration tags, allowing, for instance, that the

     $ perf probe -L getname

   command succeeds in showing the source code for the 'getname' kernel
   function, telling in which lines probes can be inserted, fix from
   Masami Hiramatsu.

 * Fix linux/magic.h related build breakage in some systems, fix from
   Vinson Lee.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agotools lib lk: Uninclude linux/magic.h in debugfs.c
Vinson Lee [Wed, 18 Sep 2013 23:16:40 +0000 (16:16 -0700)]
tools lib lk: Uninclude linux/magic.h in debugfs.c

The compilation only looks for linux/magic.h from the default include
paths, which does not include the source tree. This results in a build
error if linux/magic.h is not available or not installed.

For example, this build error occurs on CentOS 5.

$ make -C tools/lib/lk V=1
[...]
gcc -o debugfs.o -c -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6
-D_FORTIFY_SOURCE=2 -Wbad-function-cast -Wdeclaration-after-statement
-Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations
-Wmissing-prototypes -Wnested-externs -Wno-system-headers
-Wold-style-definition -Wpacked -Wredundant-decls -Wshadow
-Wstrict-aliasing=3 -Wstrict-prototypes -Wswitch-default -Wswitch-enum
-Wundef -Wwrite-strings -Wformat  -fPIC  -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 debugfs.c
debugfs.c:8:25: error: linux/magic.h: No such file or directory

The only symbol from linux/magic.h needed by debugfs.c is DEBUGFS_MAGIC,
and that is already defined in debugfs.h. linux/magic.h isn't providing
any extra symbols and can unincluded. This is similar to the approach by
perf, which has its own magic.h wrapper at
tools/perf/util/include/linux/magic.h

Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1379546200-17028-1-git-send-email-vlee@freedesktop.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Fix old GCC build error in trace-event-parse.c:parse_proc_kallsyms()
Ingo Molnar [Thu, 12 Sep 2013 13:16:49 +0000 (15:16 +0200)]
perf tools: Fix old GCC build error in trace-event-parse.c:parse_proc_kallsyms()

Old GCC (4.1) does not see through the code flow of parse_proc_kallsyms()
and gets confused about the status of 'fmt':

 util/trace-event-parse.c: In function ‘parse_proc_kallsyms’:
 util/trace-event-parse.c:189: warning: ‘fmt’ may be used uninitialized in this function
 make: *** [util/trace-event-parse.o] Error 1

Help out GCC by initializing 'fmt' to NULL.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130912131649.GC23826@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf probe: Fix finder to find lines of given function
Masami Hiramatsu [Mon, 23 Apr 2012 03:24:36 +0000 (12:24 +0900)]
perf probe: Fix finder to find lines of given function

The commit ba28c59bc9ed8fb7b9a753cd88ee54a2c4f6265b fixed a declaration
entry bug in probe_point_search_cb().  There are same bugs in line
finder and call_probe_finder().  This introduces a new dwarf utility
function to determine given DIE is a function definition, not
declaration.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120423032435.8737.80064.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf session: Check for SIGINT in more loops
Arnaldo Carvalho de Melo [Tue, 17 Sep 2013 19:34:28 +0000 (16:34 -0300)]
perf session: Check for SIGINT in more loops

When processing big files we were not checking if session_done was set
by the SIGINT signal handler, for instance in 'perf report'. Fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pyad42lgrtq7xhg2dpsoauq7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Fix compile with libelf without get_phdrnum
Adrian Hunter [Fri, 13 Sep 2013 13:49:30 +0000 (16:49 +0300)]
perf tools: Fix compile with libelf without get_phdrnum

Add a feature check for get_phdrnum() and implement a replacement if it
is not present.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379080170-6608-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Fix buildid cache handling of kallsyms with kcore
Adrian Hunter [Thu, 12 Sep 2013 18:19:19 +0000 (21:19 +0300)]
perf tools: Fix buildid cache handling of kallsyms with kcore

When kallsyms is used with kcore the dso long_name becomes the kcore
file name.  That prevents the buildid cache from caching kallsyms.
(There is no support at present for caching kcore).  Fix by changing it
so that the kallsyms name is used in that case instead.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379009959-28046-1-git-send-email-adrian.hunter@intel.com
[ Kept 'struct foo' pointer as first parameter of foo__ prefixed functions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf annotate: Fix objdump line parsing offset validation
Adrian Hunter [Thu, 12 Sep 2013 18:15:21 +0000 (21:15 +0300)]
perf annotate: Fix objdump line parsing offset validation

When parsing lines from objdump a line containing source code starting
with a numeric label is mistaken for a line of disassembly starting with
a memory address.

Current validation fails to recognise that the "memory address" is out
of range and calculates an invalid offset which later causes this
segfault:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50)
    at util/annotate.c:631
631 hits += h->addr[offset++];
(gdb) bt
 #0  0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50)
    at util/annotate.c:631
 #1  0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364
 #2  0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672
 #3  0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962
 #4  0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823
 #5  0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline=
    0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt=
    0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659
 #6  0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help=
    0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0)
    at ui/browsers/hists.c:1950
 #7  0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581
 #8  0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965
 #9  0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319
 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376
 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420
 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521

After the fix is applied the symbol can be annotated showing the
problematic line "1:      rep"

copy_user_generic_string  /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux
             */
            ENTRY(copy_user_generic_string)
                    CFI_STARTPROC
                    ASM_STAC
                    andl %edx,%edx
              and    %edx,%edx
                    jz 4f
              je     37
                    cmpl $8,%edx
              cmp    $0x8,%edx
                    jb 2f           /* less than 8 bytes, go to byte copy loop */
              jb     33
                    ALIGN_DESTINATION
              mov    %edi,%ecx
              and    $0x7,%ecx
              je     28
              sub    $0x8,%ecx
              neg    %ecx
              sub    %ecx,%edx
        1a:   mov    (%rsi),%al
              mov    %al,(%rdi)
              inc    %rsi
              inc    %rdi
              dec    %ecx
              jne    1a
                    movl %edx,%ecx
        28:   mov    %edx,%ecx
                    shrl $3,%ecx
              shr    $0x3,%ecx
                    andl $7,%edx
              and    $0x7,%edx
            1:      rep
100.00        rep    movsq %ds:(%rsi),%es:(%rdi)
                    movsq
            2:      movl %edx,%ecx
        33:   mov    %edx,%ecx
            3:      rep
              rep    movsb %ds:(%rsi),%es:(%rdi)
                    movsb
            4:      xorl %eax,%eax
        37:   xor    %eax,%eax
              data32 xchg %ax,%ax
                    ASM_CLAC
                    ret
              retq

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Fill in new definitions for madvise()/mmap() flags
Ingo Molnar [Thu, 12 Sep 2013 13:29:00 +0000 (15:29 +0200)]
perf tools: Fill in new definitions for madvise()/mmap() flags

builtin-trace.c started using various new syscall features not defined
in the header files of older distros - resulting in build failures.

Fill in the (ABI) constants if they are not defined.

(There might be a better place to put this than builtin-trace.c, into a
compat header or so.)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20130912132900.GE23826@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoperf tools: Sharpen the libaudit dependencies test
Ingo Molnar [Thu, 12 Sep 2013 13:27:06 +0000 (15:27 +0200)]
perf tools: Sharpen the libaudit dependencies test

There are older libaudit versions that don't have an
audit_errno_to_name() method, resulting in a builtin-trace.c build
error:

  builtin-trace.c: In function ‘trace__sys_exit’:
  builtin-trace.c:794: warning: implicit declaration of function ‘audit_errno_to_name’

Expand the libaudit test to detect this.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130912132706.GD23826@gmail.com
[ Fix the test by escaping the double quotes ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
11 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 18 Sep 2013 16:22:53 +0000 (11:22 -0500)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Two small fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix UAPI export of PERF_EVENT_IOC_ID
  perf/x86/intel: Fix Silvermont offcore masks

11 years agoperf: Fix UAPI export of PERF_EVENT_IOC_ID
Vince Weaver [Tue, 17 Sep 2013 18:53:41 +0000 (14:53 -0400)]
perf: Fix UAPI export of PERF_EVENT_IOC_ID

Without the following patch I have problems compiling code using
the new PERF_EVENT_IOC_ID ioctl().  It looks like u64 was used
instead of __u64

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1309171450380.11444@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 18 Sep 2013 02:20:30 +0000 (22:20 -0400)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Gleb Natapov.

* 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: set "blocked by NMI" flag if EPT violation happens during IRET from NMI
  kvm: free resources after canceling async_pf
  KVM: nEPT: reset PDPTR register cache on nested vmentry emulation
  KVM: mmu: allow page tables to be in read-only slots
  KVM: x86 emulator: emulate RETF imm

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Wed, 18 Sep 2013 01:54:05 +0000 (21:54 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:
 "Fixes for CVE-2013-2897, CVE-2013-2895, CVE-2013-2897, CVE-2013-2894,
  CVE-2013-2893, CVE-2013-2891, CVE-2013-2890, CVE-2013-2889.

  All the bugs are triggerable only by specially crafted evil-on-purpose
  HW devices.  Fixes by Kees Cook and Benjamin Tissoires"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails
  HID: multitouch: validate indexes details
  HID: logitech-dj: validate output report details
  HID: validate feature and input report details
  HID: lenovo-tpkbd: validate output report details
  HID: LG: validate HID output report details
  HID: steelseries: validate output report details
  HID: sony: validate HID output report details
  HID: zeroplus: validate output report details
  HID: provide a helper for validating hid reports

11 years agotty: disassociate_ctty() sends the extra SIGCONT
Oleg Nesterov [Sun, 15 Sep 2013 15:50:26 +0000 (17:50 +0200)]
tty: disassociate_ctty() sends the extra SIGCONT

Starting from v3.10 (probably commit f91e2590410b: "tty: Signal
foreground group processes in hangup") disassociate_ctty() sends SIGCONT
if tty && on_exit.  This breaks LSB test-suite, in particular test8 in
_exit.c and test40 in sigcon5.c.

Put the "!on_exit" check back to restore the old behaviour.

Review by Peter Hurley:
 "Yes, this regression was introduced by me in that commit.  The effect
  of the regression is that ptys will receive a SIGCONT when, in similar
  circumstances, ttys would not.

  The fact that two test vectors accidentally tripped over this
  regression suggests that some other apps may as well.

  Thanks for catching this"

Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Karel Srot <ksrot@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoKVM: VMX: set "blocked by NMI" flag if EPT violation happens during IRET from NMI
Gleb Natapov [Sun, 15 Sep 2013 08:07:23 +0000 (11:07 +0300)]
KVM: VMX: set "blocked by NMI" flag if EPT violation happens during IRET from NMI

Set "blocked by NMI" flag if EPT violation happens during IRET from NMI
otherwise NMI can be called recursively causing stack corruption.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Tue, 17 Sep 2013 15:40:49 +0000 (11:40 -0400)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

Pull more tile architecture updates from Chris Metcalf:
 "This second batch of changes is just cleanup of various kinds from
  doing some tidying work in the sources.

  Some dead code is removed, comment typos fixed, whitespace and style
  issues cleaned up, and some header updates from our internal
  "upstream" architecture team"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: remove stray blank space
  tile: <arch/> header updates from upstream
  tile: improve gxio iorpc autogenerated code style
  tile: double default VMALLOC space
  tile: remove stale arch/tile/kernel/futex_64.S
  tile: remove HUGE_VMAP dead code
  tile: use pmd_pfn() instead of casting via pte_t
  tile: fix typos in comment in arch/tile/kernel/unaligned.c

11 years agokvm: free resources after canceling async_pf
Radim Krčmář [Wed, 4 Sep 2013 20:32:23 +0000 (22:32 +0200)]
kvm: free resources after canceling async_pf

When we cancel 'async_pf_execute()', we should behave as if the work was
never scheduled in 'kvm_setup_async_pf()'.
Fixes a bug when we can't unload module because the vm wasn't destroyed.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
11 years agoKVM: nEPT: reset PDPTR register cache on nested vmentry emulation
Gleb Natapov [Mon, 2 Sep 2013 12:25:28 +0000 (15:25 +0300)]
KVM: nEPT: reset PDPTR register cache on nested vmentry emulation

After nested vmentry stale cache can be used to reload L2 PDPTR pointers
which will cause L2 guest to fail. Fix it by invalidating cache on nested
vmentry emulation.

https://bugzilla.kernel.org/show_bug.cgi?id=60830

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
11 years agoKVM: mmu: allow page tables to be in read-only slots
Paolo Bonzini [Mon, 9 Sep 2013 11:52:33 +0000 (13:52 +0200)]
KVM: mmu: allow page tables to be in read-only slots

Page tables in a read-only memory slot will currently cause a triple
fault because the page walker uses gfn_to_hva and it fails on such a slot.

OVMF uses such a page table; however, real hardware seems to be fine with
that as long as the accessed/dirty bits are set.  Save whether the slot
is readonly, and later check it when updating the accessed and dirty bits.

Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
11 years agoKVM: x86 emulator: emulate RETF imm
Bruce Rogers [Mon, 9 Sep 2013 15:40:20 +0000 (09:40 -0600)]
KVM: x86 emulator: emulate RETF imm

Opcode CA

This gets used by a DOS based NetWare guest.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
11 years agoLinux 3.12-rc1
Linus Torvalds [Mon, 16 Sep 2013 20:17:51 +0000 (16:17 -0400)]
Linux 3.12-rc1

11 years agoMerge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus Torvalds [Mon, 16 Sep 2013 20:10:26 +0000 (16:10 -0400)]
Merge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer code update from Thomas Gleixner:
 - armada SoC clocksource overhaul with a trivial merge conflict
 - Minor improvements to various SoC clocksource drivers

* 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding
  clocksource: armada-370-xp: Get reference fixed-clock by name
  clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
  clocksource: armada-370-xp: Fix device-tree binding
  clocksource: armada-370-xp: Introduce new compatibles
  clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
  clocksource: armada-370-xp: Simplify TIMER_CTRL register access
  clocksource: armada-370-xp: Use BIT()
  ARM: timer-sp: Set dynamic irq affinity
  ARM: nomadik: add dynamic irq flag to the timer
  clocksource: sh_cmt: 32-bit control register support
  clocksource: em_sti: Convert to devm_* managed helpers

11 years agotile: remove stray blank space
Chris Metcalf [Mon, 16 Sep 2013 18:41:21 +0000 (14:41 -0400)]
tile: remove stray blank space

The compat sys_llseek() definition addition added a bogus space
on an otherwise-blank line.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: <arch/> header updates from upstream
Chris Metcalf [Mon, 16 Sep 2013 18:18:21 +0000 (14:18 -0400)]
tile: <arch/> header updates from upstream

The hardware architecture descriptor headers have been updated, in
particular to reflect some larger MMIO fields on the mPIPE shims for
controlling the network hardware, from the recent Gx72 release.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: improve gxio iorpc autogenerated code style
Chris Metcalf [Mon, 16 Sep 2013 17:52:45 +0000 (13:52 -0400)]
tile: improve gxio iorpc autogenerated code style

Fix some whitespace style issues in some auto-generated files.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: double default VMALLOC space
Chris Metcalf [Mon, 16 Sep 2013 17:02:57 +0000 (13:02 -0400)]
tile: double default VMALLOC space

With per-cpu data as well as loaded kernel modules coming from
the vmalloc arena, we get close to the line all the time and
occasionally need more than we had, so just double it up by default.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agoMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Mon, 16 Sep 2013 19:39:21 +0000 (15:39 -0400)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French:
 "Two minor cifs fixes and a minor documentation cleanup for cifs.txt"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update cifs.txt and remove some outdated infos
  cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache
  cifs: Do not take a reference to the page in cifs_readpage_worker()

11 years agoMerge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi
Linus Torvalds [Mon, 16 Sep 2013 19:37:52 +0000 (15:37 -0400)]
Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi

Pull UBI fixes from Artem Bityutskiy:
 "Just a single fastmap fix plus a regression fix"

* tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi:
  UBI: Fix invalidate_fastmap()
  UBI: Fix PEB leak in wear_leveling_worker()

11 years agoMerge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Mon, 16 Sep 2013 19:36:55 +0000 (15:36 -0400)]
Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs

Pull ubifs fix from Artem Bityutskiy:
 "Just one patch which fixes the power-cut recovery testing mode.

  I'll start using a single UBI/UBIFS tree instead of 2 trees from now
  on.  So in the future you'll get 1 small pull request instead of 2
  tiny ones"

* tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: remove invalid warn msg with tst_recovery enabled

11 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Sun, 15 Sep 2013 21:45:52 +0000 (17:45 -0400)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "These are four patches for three construction sites:

   - Fix register decoding for the combination of multi-core processors
     and multi-threading.

   - Two more fixes that are part of the ongoing DECstation resurrection
     work.  One of these touches a DECstation-only network driver.

   - Finally Markos' trivial build fix for the AP/SP support.

  (With this applied now all MIPS defconfigs are building again)"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: kernel: vpe: Make vpe_attrs an array of pointers.
  MIPS: Fix SMP core calculations when using MT support.
  MIPS: DECstation I/O ASIC DMA interrupt handling fix
  MIPS: DECstation HRT initialization rearrangement

11 years agoMerge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Linus Torvalds [Sun, 15 Sep 2013 21:42:59 +0000 (17:42 -0400)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform updates from Matthew Garrett:
 "Nothing amazing here, almost entirely cleanups and minor bugfixes and
  one bit of hardware enablement in the amilo-rfkill driver"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  platform/x86: panasonic-laptop: reuse module_acpi_driver
  samsung-laptop: fix config build error
  platform: x86: remove unnecessary platform_set_drvdata()
  amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310.
  wmi: parse_wdg() should return kernel error codes
  hp_wmi: Fix unregister order in hp_wmi_rfkill_setup()
  platform: replace strict_strto*() with kstrto*()
  x86: irst: use module_acpi_driver to simplify the code
  x86: smartconnect: use module_acpi_driver to simplify the code
  platform samsung-q10: use ACPI instead of direct EC calls
  thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk
  thinkpad_acpi: return -NODEV while operating uninitialized LEDs

11 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sun, 15 Sep 2013 21:41:30 +0000 (17:41 -0400)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull misc SCSI driver updates from James Bottomley:
 "This patch set is a set of driver updates (megaraid_sas, fnic, lpfc,
  ufs, hpsa) we also have a couple of bug fixes (sd out of bounds and
  ibmvfc error handling) and the first round of esas2r checker fixes and
  finally the much anticipated big endian additions for megaraid_sas"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits)
  [SCSI] fnic: fnic Driver Tuneables Exposed through CLI
  [SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg
  [SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset
  [SCSI] fnic: Remove QUEUE_FULL handling code
  [SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up
  [SCSI] fnic: FC stat param seconds_since_last_reset not getting updated
  [SCSI] sd: Fix potential out-of-bounds access
  [SCSI] lpfc 8.3.42: Update lpfc version to driver version 8.3.42
  [SCSI] lpfc 8.3.42: Fixed issue of task management commands having a fixed timeout
  [SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage.
  [SCSI] lpfc 8.3.42: Fix driver's abort loop functionality to skip IOs already getting aborted
  [SCSI] lpfc 8.3.42: Fixed failure to allocate SCSI buffer on PPC64 platform for SLI4 devices
  [SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloads
  [SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute WQ/RQ pci bar selection
  [SCSI] lpfc 8.3.42: Fixed driver iocbq structure's iocb_flag field running out of space
  [SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logic
  [SCSI] lpfc 8.3.42: Fixed logging format of setting driver sysfs attributes hard to interpret
  [SCSI] lpfc 8.3.42: Fixed back to back RSCNs discovery failure.
  [SCSI] lpfc 8.3.42: Fixed race condition between BSG I/O dispatch and timeout handling
  [SCSI] lpfc 8.3.42: Fixed function mode field defined too small for not recognizing dual-chute mode
  ...

11 years agoMerge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sun, 15 Sep 2013 11:15:06 +0000 (07:15 -0400)]
Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux

Pull SLAB update from Pekka Enberg:
 "Nothing terribly exciting here apart from Christoph's kmalloc
  unification patches that brings sl[aou]b implementations closer to
  each other"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: Use correct GFP_DMA constant
  slub: remove verify_mem_not_deleted()
  mm/sl[aou]b: Move kmallocXXX functions to common code
  mm, slab_common: add 'unlikely' to size check of kmalloc_slab()
  mm/slub.c: beautify code for removing redundancy 'break' statement.
  slub: Remove unnecessary page NULL check
  slub: don't use cpu partial pages on UP
  mm/slub: beautify code for 80 column limitation and tab alignment
  mm/slub: remove 'per_cpu' which is useless variable

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sun, 15 Sep 2013 11:13:39 +0000 (07:13 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input update from Dmitry Torokhov:
 "The only change is David Hermann's new EVIOCREVOKE evdev ioctl that
  allows safely passing file descriptors to input devices to session
  processes and later being able to stop delivery of events through
  these fds so that inactive sessions will no longer receive user input
  that does not belong to them"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: evdev - add EVIOCREVOKE ioctl

11 years agovfs: fix typo in comment in recent dentry work
Linus Torvalds [Sun, 15 Sep 2013 11:11:01 +0000 (07:11 -0400)]
vfs: fix typo in comment in recent dentry work

Sedat points out that I transposed some letters in "LRU" and wrote "RLU"
instead in one of the new comments explaining the flow.  Let's just fix
it.

Reported-by: Sedat Dilek <sedat.dilek@jpberlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopartitions/efi: loosen check fot pmbr size in lba
Davidlohr Bueso [Fri, 13 Sep 2013 22:02:22 +0000 (15:02 -0700)]
partitions/efi: loosen check fot pmbr size in lba

Matt found that commit 27a7c642174e ("partitions/efi: account for pmbr
size in lba") caused his GPT formatted eMMC device not to boot.  The
reason is that this commit enforced Linux to always check the lesser of
the whole disk or 2Tib for the pMBR size in LBA.  While most disk
partitioning tools out there create a pMBR with these characteristics,
Microsoft does not, as it always sets the entry to the maximum 32-bit
limitation - even though a drive may be smaller than that[1].

Loosen this check and only verify that the size is either the whole disk
or 0xFFFFFFFF.  No tool in its right mind would set it to any value
other than these.

[1] http://thestarman.pcministry.com/asm/mbr/GPT.htm#GPTPT

Reported-and-tested-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg...
Linus Torvalds [Sat, 14 Sep 2013 03:06:40 +0000 (23:06 -0400)]
Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

Pull writeback fix from Wu Fengguang:
 "A trivial writeback fix"

* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Do not sort b_io list only because of block device inode

11 years agovfs: fix dentry LRU list handling and nr_dentry_unused accounting
Linus Torvalds [Sat, 14 Sep 2013 02:55:10 +0000 (22:55 -0400)]
vfs: fix dentry LRU list handling and nr_dentry_unused accounting

The LRU list changes interacted badly with our nr_dentry_unused
accounting, and even worse with the new DCACHE_LRU_LIST bit logic.

This introduces helper functions to make sure everything follows the
proper dcache d_lru list rules: the dentry cache is complicated by the
fact that some of the hotpaths don't even want to look at the LRU list
at all, and the fact that we use the same list entry in the dentry for
both the LRU list and for our temporary shrinking lists when removing
things from the LRU.

The helper functions temporarily have some extra sanity checking for the
flag bits that have to match the current LRU state of the dentry.  We'll
remove that before the final 3.12 release, but considering how easy it
is to get wrong, this first cleanup version has some very particular
sanity checking.

Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agocifs: update cifs.txt and remove some outdated infos
Björn Jacke [Tue, 10 Sep 2013 08:28:38 +0000 (10:28 +0200)]
cifs: update cifs.txt and remove some outdated infos

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Björn JACKE <bj@sernet.de>
Signed-off-by: Steve French <smfrench@gmail.com>
11 years agocifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache
Sachin Prabhu [Fri, 13 Sep 2013 13:11:57 +0000 (14:11 +0100)]
cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache

When reading a single page with cifs_readpage(), we make a call to
fscache_read_or_alloc_page() which once done, asynchronously calls
the completion function cifs_readpage_from_fscache_complete(). This
completion function unlocks the page once it has been populated from
cache. The module then attempts to unlock the page a second time in
cifs_readpage() which leads to warning messages.

In case of a successful call to fscache_read_or_alloc_page() we should skip
the second unlock_page() since this will be called by the
cifs_readpage_from_fscache_complete() once the page has been populated by
fscache.

With the modifications to cifs_readpage_worker(), we will need to re-grab the
page lock in cifs_write_begin().

The problem was first noticed when testing new fscache patches for cifs.
https://bugzilla.redhat.com/show_bug.cgi?id=1005737

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
11 years agocifs: Do not take a reference to the page in cifs_readpage_worker()
Sachin Prabhu [Fri, 13 Sep 2013 13:11:56 +0000 (14:11 +0100)]
cifs: Do not take a reference to the page in cifs_readpage_worker()

We do not need to take a reference to the pagecache in
cifs_readpage_worker() since the calling function will have already
taken one before passing the pointer to the page as an argument to the
function.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
11 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 13 Sep 2013 17:58:41 +0000 (10:58 -0700)]
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Some more low risk cleanup patches:

   - Remove unnecessary pci_set_drvdata in k10temp driver from Jingoo Han
   - Fix return values in several drivers from Sachin Kamat
   - Remove redundant break in amc6821 driver from Sachin Kamat"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) remove unnecessary pci_set_drvdata()
  hwmon: (tmp421) Fix return value
  hwmon: (amc6821) Remove redundant break
  hwmon: (amc6821) Fix return value
  hwmon: (ibmaem) Fix return value
  hwmon: (emc2103) Fix return value

11 years agoMerge tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux
Linus Torvalds [Fri, 13 Sep 2013 17:57:48 +0000 (10:57 -0700)]
Merge tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux

Pull Xtensa updates from Chris Zankel.

* tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux:
  xtensa: Fix broken allmodconfig build
  xtensa: remove CCOUNT_PER_JIFFY
  xtensa: fix !CONFIG_XTENSA_CALIBRATE_CCOUNT build failure
  xtensa: don't use echo -e needlessly
  xtensa: new fast_alloca handler
  xtensa: keep a3 and excsave1 on entry to exception handlers
  xtensa: enable kernel preemption
  xtensa: check thread flags atomically on return from user exception

11 years agoMerge git://git.kvack.org/~bcrl/aio-next
Linus Torvalds [Fri, 13 Sep 2013 17:55:58 +0000 (10:55 -0700)]
Merge git://git.kvack.org/~bcrl/aio-next

Pull aio changes from Ben LaHaise:
 "First off, sorry for this pull request being late in the merge window.
  Al had raised a couple of concerns about 2 items in the series below.
  I addressed the first issue (the race introduced by Gu's use of
  mm_populate()), but he has not provided any further details on how he
  wants to rework the anon_inode.c changes (which were sent out months
  ago but have yet to be commented on).

  The bulk of the changes have been sitting in the -next tree for a few
  months, with all the issues raised being addressed"

* git://git.kvack.org/~bcrl/aio-next: (22 commits)
  aio: rcu_read_lock protection for new rcu_dereference calls
  aio: fix race in ring buffer page lookup introduced by page migration support
  aio: fix rcu sparse warnings introduced by ioctx table lookup patch
  aio: remove unnecessary debugging from aio_free_ring()
  aio: table lookup: verify ctx pointer
  staging/lustre: kiocb->ki_left is removed
  aio: fix error handling and rcu usage in "convert the ioctx list to table lookup v3"
  aio: be defensive to ensure request batching is non-zero instead of BUG_ON()
  aio: convert the ioctx list to table lookup v3
  aio: double aio_max_nr in calculations
  aio: Kill ki_dtor
  aio: Kill ki_users
  aio: Kill unneeded kiocb members
  aio: Kill aio_rw_vect_retry()
  aio: Don't use ctx->tail unnecessarily
  aio: io_cancel() no longer returns the io_event
  aio: percpu ioctx refcount
  aio: percpu reqs_available
  aio: reqs_active -> reqs_available
  aio: fix build when migration is disabled
  ...

11 years agotile: remove stale arch/tile/kernel/futex_64.S
Chris Metcalf [Mon, 9 Sep 2013 16:18:54 +0000 (12:18 -0400)]
tile: remove stale arch/tile/kernel/futex_64.S

This should have been removed with commit 47d632f9f8f3, but
it was overlooked.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: remove HUGE_VMAP dead code
Chris Metcalf [Wed, 11 Sep 2013 17:57:15 +0000 (13:57 -0400)]
tile: remove HUGE_VMAP dead code

A config option to allow a variant vmap() using huge pages that was never
upstreamed had some bits of code related to it scattered around the tile
architecture; the config option was removed downstream and this commit
cleans up the scattered evidence of it from the upstream as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: use pmd_pfn() instead of casting via pte_t
Chris Metcalf [Fri, 13 Sep 2013 15:14:25 +0000 (11:14 -0400)]
tile: use pmd_pfn() instead of casting via pte_t

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agotile: fix typos in comment in arch/tile/kernel/unaligned.c
Chris Metcalf [Fri, 13 Sep 2013 14:57:54 +0000 (10:57 -0400)]
tile: fix typos in comment in arch/tile/kernel/unaligned.c

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
11 years agoMerge branch 'genirq' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 13 Sep 2013 14:31:38 +0000 (07:31 -0700)]
Merge branch 'genirq' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull generic hardirq option removal from Martin Schwidefsky:
 "All architectures now use generic hardirqs, s390 has been last to
  switch.

  With that the code under !CONFIG_GENERIC_HARDIRQS and the related
  HAVE_GENERIC_HARDIRQS and GENERIC_HARDIRQS config options can be
  removed.  Yay!"

* 'genirq' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  Remove GENERIC_HARDIRQ config option

11 years agoMerge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Fri, 13 Sep 2013 14:30:17 +0000 (07:30 -0700)]
Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

Pull kconfig fix from Michal Marek:
 "This is a fix for a regression caused by my previous pull request.

  A sed command in scripts/config that used colons as separator was
  accidentally changed to use slashes, which fails when you use slashes
  in a value.  Changing it back to colons is of course not a proper fix,
  but at least it will be broken in the same way it had been for four
  years.  A proper fix is pending"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/config: fix variable substitution command

11 years agoMerge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realm...
Linus Torvalds [Fri, 13 Sep 2013 14:23:49 +0000 (07:23 -0700)]
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: Ignore generated uImages
  blackfin: Add STMMAC platform data to enable dwmac1000 driver on BF60x.
  bf609: adv7343: add S-Video and Component output support
  bf609: add adv7343 video encoder support
  clock: add stmmac clock for ethernet driver
  blackfin: scb: Add SCB1 to SCB9 config options and data.
  blackfin: scb: Add system crossbar init code.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 13 Sep 2013 14:11:14 +0000 (07:11 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a 7+ year race condition in the crypto API that causes
  sporadic crashes when multiple threads load the same algorithm.

  It also fixes the crct10dif algorithm again to prevent boot failures
  on systems where the initramfs tool ignores module softdeps"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: crct10dif - Add fallback for broken initrds
  crypto: api - Fix race condition in larval lookup

11 years agoHID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails
Benjamin Tissoires [Wed, 11 Sep 2013 19:56:59 +0000 (21:56 +0200)]
HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails

If tpkbd_probe_tp() bails out, the probe() function return an error,
but hid_hw_stop() is never called.

fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1003998

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: multitouch: validate indexes details
Benjamin Tissoires [Wed, 11 Sep 2013 19:56:58 +0000 (21:56 +0200)]
HID: multitouch: validate indexes details

When working on report indexes, always validate that they are in bounds.
Without this, a HID device could report a malicious feature report that
could trick the driver into a heap overflow:

[  634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500
...
[  676.469629] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

Note that we need to change the indexes from s8 to s16 as they can
be between -1 and 255.

CVE-2013-2897

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: logitech-dj: validate output report details
Kees Cook [Wed, 11 Sep 2013 19:56:56 +0000 (21:56 +0200)]
HID: logitech-dj: validate output report details

A HID device could send a malicious output report that would cause the
logitech-dj HID driver to leak kernel memory contents to the device, or
trigger a NULL dereference during initialization:

[  304.424553] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
...
[  304.780467] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  304.781409] IP: [<ffffffff815d50aa>] logi_dj_recv_send_report.isra.11+0x1a/0x90

CVE-2013-2895

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: validate feature and input report details
Benjamin Tissoires [Wed, 11 Sep 2013 19:56:57 +0000 (21:56 +0200)]
HID: validate feature and input report details

When dealing with usage_index, be sure to properly use unsigned instead of
int to avoid overflows.

When working on report fields, always validate that their report_counts are
in bounds.
Without this, a HID device could report a malicious feature report that
could trick the driver into a heap overflow:

[  634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500
...
[  676.469629] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2897

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: lenovo-tpkbd: validate output report details
Kees Cook [Wed, 11 Sep 2013 19:56:55 +0000 (21:56 +0200)]
HID: lenovo-tpkbd: validate output report details

A HID device could send a malicious output report that would cause the
lenovo-tpkbd HID driver to write just beyond the output report allocation
during initialization, causing a heap overflow:

[   76.109807] usb 1-1: New USB device found, idVendor=17ef, idProduct=6009
...
[   80.462540] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2894

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoMIPS: kernel: vpe: Make vpe_attrs an array of pointers.
Markos Chandras [Wed, 11 Sep 2013 12:17:52 +0000 (13:17 +0100)]
MIPS: kernel: vpe: Make vpe_attrs an array of pointers.

Commit 567b21e973ccf5b0d13776e408d7c67099749eb8
"mips: convert vpe_class to use dev_groups"

broke the build on MIPS since vpe_attrs should be an array
of 'struct device_attribute' pointers.

Fixes the following build problem:
arch/mips/kernel/vpe.c:1372:2: error: missing braces around initializer
[-Werror=missing-braces]
arch/mips/kernel/vpe.c:1372:2: error: (near initialization for 'vpe_attrs[0]')
[-Werror=missing-braces]

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5819/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
11 years agoHID: LG: validate HID output report details
Kees Cook [Wed, 11 Sep 2013 19:56:54 +0000 (21:56 +0200)]
HID: LG: validate HID output report details

A HID device could send a malicious output report that would cause the
lg, lg3, and lg4 HID drivers to write beyond the output report allocation
during an event, causing a heap overflow:

[  325.245240] usb 1-1: New USB device found, idVendor=046d, idProduct=c287
...
[  414.518960] BUG kmalloc-4096 (Not tainted): Redzone overwritten

Additionally, while lg2 did correctly validate the report details, it was
cleaned up and shortened.

CVE-2013-2893

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: steelseries: validate output report details
Kees Cook [Wed, 11 Sep 2013 19:56:53 +0000 (21:56 +0200)]
HID: steelseries: validate output report details

A HID device could send a malicious output report that would cause the
steelseries HID driver to write beyond the output report allocation
during initialization, causing a heap overflow:

[  167.981534] usb 1-1: New USB device found, idVendor=1038, idProduct=1410
...
[  182.050547] BUG kmalloc-256 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2891

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: sony: validate HID output report details
Kees Cook [Wed, 11 Sep 2013 19:56:52 +0000 (21:56 +0200)]
HID: sony: validate HID output report details

This driver must validate the availability of the HID output report and
its size before it can write LED states via buzz_set_leds(). This stops
a heap overflow that is possible if a device provides a malicious HID
output report:

[  108.171280] usb 1-1: New USB device found, idVendor=054c, idProduct=0002
...
[  117.507877] BUG kmalloc-192 (Not tainted): Redzone overwritten

CVE-2013-2890

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org #3.11
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: zeroplus: validate output report details
Kees Cook [Wed, 11 Sep 2013 19:56:51 +0000 (21:56 +0200)]
HID: zeroplus: validate output report details

The zeroplus HID driver was not checking the size of allocated values
in fields it used. A HID device could send a malicious output report
that would cause the driver to write beyond the output report allocation
during initialization, causing a heap overflow:

[ 1442.728680] usb 1-1: New USB device found, idVendor=0c12, idProduct=0005
...
[ 1466.243173] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2889

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoHID: provide a helper for validating hid reports
Kees Cook [Wed, 11 Sep 2013 19:56:50 +0000 (21:56 +0200)]
HID: provide a helper for validating hid reports

Many drivers need to validate the characteristics of their HID report
during initialization to avoid misusing the reports. This adds a common
helper to perform validation of the report exisitng, the field existing,
and the expected number of values within the field.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
11 years agoRemove GENERIC_HARDIRQ config option
Martin Schwidefsky [Fri, 30 Aug 2013 07:39:53 +0000 (09:39 +0200)]
Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
11 years agoscripts/config: fix variable substitution command
Clement Chauplannaz [Fri, 13 Sep 2013 08:45:13 +0000 (10:45 +0200)]
scripts/config: fix variable substitution command

Commit 229455bc02b87f7128f190c4491b4ceffff38648 accidentally changed the
separator between sed `s' command and its parameters from ':' to '/'.

Revert this change.

Reported-and-tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
11 years agoMIPS: Fix SMP core calculations when using MT support.
Leonid Yegoshin [Wed, 11 Sep 2013 19:17:47 +0000 (14:17 -0500)]
MIPS: Fix SMP core calculations when using MT support.

The TCBIND register is only available if the core has MT support. It
should not be read otherwise. Secondly, the number of TCs (siblings)
are calculated differently depending on if the kernel is configured
as SMVP or SMTC.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5822/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
11 years agoMIPS: DECstation I/O ASIC DMA interrupt handling fix
Maciej W. Rozycki [Thu, 12 Sep 2013 11:14:31 +0000 (12:14 +0100)]
MIPS: DECstation I/O ASIC DMA interrupt handling fix

This change complements commit d0da7c002f7b2a93582187a9e3f73891a01d8ee4
and brings clear_ioasic_irq back, renaming it to clear_ioasic_dma_irq at
the same time, to make I/O ASIC DMA interrupts functional.

Unlike ordinary I/O ASIC interrupts DMA interrupts need to be deasserted
by software by writing 0 to the respective bit in I/O ASIC's System
Interrupt Register (SIR), similarly to how CP0.Cause.IP0 and CP0.Cause.IP1
bits are handled in the CPU (the difference is SIR DMA interrupt bits are
R/W0C so there's no need for an RMW cycle).  Otherwise the handler is
reentered over and over again.

The only current user is the DEC LANCE Ethernet driver and its extremely
uncommon DMA memory error handler that does not care when exactly the
interrupt is cleared.  Anticipating the use of DMA interrupts by the Zilog
SCC driver this change however exports clear_ioasic_dma_irq for device
drivers to choose the right application-specific sequence to clear the
request explicitly rather than calling it implicitly in the .irq_eoi
handler of `struct irq_chip'.  Previously these interrupts were cleared in
the .end handler of the said structure, before it was removed.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5826/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
11 years agoMIPS: DECstation HRT initialization rearrangement
Maciej W. Rozycki [Thu, 12 Sep 2013 11:01:53 +0000 (12:01 +0100)]
MIPS: DECstation HRT initialization rearrangement

Not all I/O ASIC versions have the free-running counter implemented, an
early revision used in the 5000/1xx models aka 3MIN and 4MIN did not have
it.  Therefore we cannot unconditionally use it as a clock source.
Fortunately if not implemented its register slot has a fixed value so it
is enough if we check for the value at the end of the calibration period
being the same as at the beginning.

This also means we need to look for another high-precision clock source on
the systems affected.  The 5000/1xx can have an R4000SC processor
installed where the CP0 Count register can be used as a clock source.
Unfortunately all the R4k DECstations suffer from the missed timer
interrupt on CP0 Count reads erratum, so we cannot use the CP0 timer as a
clock source and a clock event both at a time.  However we never need an
R4k clock event device because all DECstations have a DS1287A RTC chip
whose periodic interrupt can be used as a clock source.

This gives us the following four configuration possibilities for I/O ASIC
DECstations:

1. No I/O ASIC counter and no CP0 timer, e.g. R3k 5000/1xx (3MIN).

2. No I/O ASIC counter but the CP0 timer, i.e. R4k 5000/150 (4MIN).

3. The I/O ASIC counter but no CP0 timer, e.g. R3k 5000/240 (3MAX+).

4. The I/O ASIC counter and the CP0 timer, e.g. R4k 5000/260 (4MAX+).

For #1 and #2 this change stops the I/O ASIC free-running counter from
being installed as a clock source of a 0Hz frequency.  For #2 it also
arranges for the CP0 timer to be used as a clock source rather than a
clock event device, because having an accurate wall clock is more
important than a high-precision interval timer.  For #3 there is no
change.  For #4 the change makes the I/O ASIC free-running counter
installed as a clock source so that the CP0 timer can be used as a clock
event device.

Unfortunately the use of the CP0 timer as a clock event device relies on a
succesful completion of c0_compare_interrupt.  That never happens, because
while waiting for a CP0 Compare interrupt to happen the function spins in
a loop reading the CP0 Count register.  This makes the CP0 Count erratum
trigger reliably causing the interrupt waited for to be lost in all cases.
As a result #4 resorts to using the CP0 timer as a clock source as well,
just as #2.  However we want to keep this separate arrangement in case
(hope) c0_compare_interrupt is eventually rewritten such that it avoids
the erratum.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5825/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
11 years agoblackfin: Ignore generated uImages
Mark Brown [Thu, 29 Aug 2013 10:23:08 +0000 (11:23 +0100)]
blackfin: Ignore generated uImages

We have the build infrastructure to generate uImages so we should ignore
the resulting generated files.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
11 years agoblackfin: Add STMMAC platform data to enable dwmac1000 driver on BF60x.
Sonic Zhang [Thu, 15 Aug 2013 06:08:05 +0000 (14:08 +0800)]
blackfin: Add STMMAC platform data to enable dwmac1000 driver on BF60x.

- Enable GMAC
- Set propler DMA PBL
- Disable DMA store and forward mode
- Select PTP input clock from MII
clock.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
11 years agobf609: adv7343: add S-Video and Component output support
Scott Jiang [Thu, 8 Aug 2013 22:48:22 +0000 (18:48 -0400)]
bf609: adv7343: add S-Video and Component output support

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
11 years agobf609: add adv7343 video encoder support
Scott Jiang [Wed, 7 Aug 2013 06:30:43 +0000 (02:30 -0400)]
bf609: add adv7343 video encoder support

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
11 years agoclock: add stmmac clock for ethernet driver
Steven Miao [Fri, 5 Jul 2013 06:36:09 +0000 (14:36 +0800)]
clock: add stmmac clock for ethernet driver

Signed-off-by: Steven Miao <realmz6@gmail.com>
11 years agoblackfin: scb: Add SCB1 to SCB9 config options and data.
Sonic Zhang [Thu, 15 Nov 2012 04:32:26 +0000 (12:32 +0800)]
blackfin: scb: Add SCB1 to SCB9 config options and data.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
11 years agoblackfin: scb: Add system crossbar init code.
Steven Miao [Thu, 12 Sep 2013 08:36:16 +0000 (16:36 +0800)]
blackfin: scb: Add system crossbar init code.

If SCB exists in select blackfin cpu, developer can change the SCB
priority in kernel configuration.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
11 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Thu, 12 Sep 2013 23:14:49 +0000 (16:14 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This has been sitting in -next for a while with no objections and all
  MIPS defconfigs except one are building fine; that one platform got
  broken by another patch in your tree and I'm going to submit a patch
  separately.

   - a handful of fixes that didn't make 3.11
   - a few bits of Octeon 3 support with more to come for a later
     release
   - platform enhancements for Octeon, ath79, Lantiq, Netlogic and
     Ralink SOCs
   - a GPIO driver for the Octeon
   - some dusting off of the DECstation code
   - the usual dose of cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
  MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
  MIPS: kexec: Fix random crashes while loading crashkernel
  MIPS: kdump: Skip walking indirection page for crashkernels
  MIPS: DECstation HRT calibration bug fixes
  MIPS: Export copy_from_user_page() (needed by lustre)
  MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
  MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
  MIPS: ralink: Add support for reset-controller API
  MIPS: ralink: mt7620: Add cpu-feature-override header
  MIPS: ralink: mt7620: Add spi clock definition
  MIPS: ralink: mt7620: Add wdt clock definition
  MIPS: ralink: mt7620: Improve clock frequency detection
  MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
  MIPS: ralink: mt7620: Add verbose ram info
  MIPS: ralink: Probe clocksources from OF
  MIPS: ralink: Add support for systick timer found on newer ralink SoC
  MIPS: ralink: Add support for periodic timer irq
  MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
  MIPS: Netlogic: Add support for USB on XLP2xx
  MIPS: Netlogic: XLP2xx update for I2C controller
  ...

11 years agoMerge tag 'xfs-for-linus-v3.12-rc1-2' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Thu, 12 Sep 2013 23:13:41 +0000 (16:13 -0700)]
Merge tag 'xfs-for-linus-v3.12-rc1-2' of git://oss.sgi.com/xfs/xfs

Pull xfs update #2 from Ben Myers:
 "Here we have defrag support for v5 superblock, a number of bugfixes
  and a cleanup or two.

   - defrag support for CRC filesystems
   - fix endian worning in xlog_recover_get_buf_lsn
   - fixes for sparse warnings
   - fix for assert in xfs_dir3_leaf_hdr_from_disk
   - fix for log recovery of remote symlinks
   - fix for log recovery of btree root splits
   - fixes formemory allocation failures with ACLs
   - fix for assert in xfs_buf_item_relse
   - fix for assert in xfs_inode_buf_verify
   - fix an assignment in an assert that should be a test in
     xfs_bmbt_change_owner
   - remove dead code in xlog_recover_inode_pass2"

* tag 'xfs-for-linus-v3.12-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: remove dead code from xlog_recover_inode_pass2
  xfs: = vs == typo in ASSERT()
  xfs: don't assert fail on bad inode numbers
  xfs: aborted buf items can be in the AIL.
  xfs: factor all the kmalloc-or-vmalloc fallback allocations
  xfs: fix memory allocation failures with ACLs
  xfs: ensure we copy buffer type in da btree root splits
  xfs: set remote symlink buffer type for recovery
  xfs: recovery of swap extents operations for CRC filesystems
  xfs: swap extents operations for CRC filesystems
  xfs: check magic numbers in dir3 leaf verifier first
  xfs: fix some minor sparse warnings
  xfs: fix endian warning in xlog_recover_get_buf_lsn()

11 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Thu, 12 Sep 2013 23:11:45 +0000 (16:11 -0700)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity again this round for I/O performance optimizations
  (per-cpu IDA pre-allocation for vhost + iscsi/target), and the
  addition of new fabric independent features to target-core
  (COMPARE_AND_WRITE + EXTENDED_COPY).

  The main highlights include:

   - Support for iscsi-target login multiplexing across individual
     network portals
   - Generic Per-cpu IDA logic (kent + akpm + clameter)
   - Conversion of vhost to use per-cpu IDA pre-allocation for
     descriptors, SGLs and userspace page pointer list
   - Conversion of iscsi-target + iser-target to use per-cpu IDA
     pre-allocation for descriptors
   - Add support for generic COMPARE_AND_WRITE (AtomicTestandSet)
     emulation for virtual backend drivers
   - Add support for generic EXTENDED_COPY (CopyOffload) emulation for
     virtual backend drivers.
   - Add support for fast memory registration mode to iser-target (Vu)

  The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of
  particular significance, which make us the first and only open source
  target to support the full set of VAAI primitives.

  Currently Linux clients are lacking upstream support to actually
  utilize these primitives.  However, with server side support now in
  place for folks like MKP + ZAB working on the client, this logic once
  reserved for the highest end of storage arrays, can now be run in VMs
  on their laptops"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
  target/iscsi: Bump versions to v4.1.0
  target: Update copyright ownership/year information to 2013
  iscsi-target: Bump default TCP listen backlog to 256
  target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out
  iscsi-target; Bump default CmdSN Depth to 64
  iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set
  iscsi-target: Add thread_set->ts_activate_sem + use common deallocate
  iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE
  target: remove unused including <linux/version.h>
  iser-target: introduce fast memory registration mode (FRWR)
  iser-target: generalize rdma memory registration and cleanup
  iser-target: move rdma wr processing to a shared function
  target: Enable global EXTENDED_COPY setup/release
  target: Add Third Party Copy (3PC) bit in INQUIRY response
  target: Enable EXTENDED_COPY setup in spc_parse_cdb
  target: Add support for EXTENDED_COPY copy offload emulation
  target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check
  target: Add global device list for EXTENDED_COPY
  target: Make helpers non static for EXTENDED_COPY command setup
  target: Make spc_parse_naa_6h_vendor_specific non static
  ...

11 years agoMerge branch 'akpm' (patches from Andrew Morton)
Linus Torvalds [Thu, 12 Sep 2013 22:44:27 +0000 (15:44 -0700)]
Merge branch 'akpm' (patches from Andrew Morton)

Merge more patches from Andrew Morton:
 "The rest of MM.  Plus one misc cleanup"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  mm/Kconfig: add MMU dependency for MIGRATION.
  kernel: replace strict_strto*() with kstrto*()
  mm, thp: count thp_fault_fallback anytime thp fault fails
  thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
  thp: do_huge_pmd_anonymous_page() cleanup
  thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
  mm: cleanup add_to_page_cache_locked()
  thp: account anon transparent huge pages into NR_ANON_PAGES
  truncate: drop 'oldsize' truncate_pagecache() parameter
  mm: make lru_add_drain_all() selective
  memcg: document cgroup dirty/writeback memory statistics
  memcg: add per cgroup writeback pages accounting
  memcg: check for proper lock held in mem_cgroup_update_page_stat
  memcg: remove MEMCG_NR_FILE_MAPPED
  memcg: reduce function dereference
  memcg: avoid overflow caused by PAGE_ALIGN
  memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
  memcg: correct RESOURCE_MAX to ULLONG_MAX
  mm: memcg: do not trap chargers with full callstack on OOM
  mm: memcg: rework and document OOM waiting and wakeup
  ...

11 years agomm/Kconfig: add MMU dependency for MIGRATION.
Chen Gang [Thu, 12 Sep 2013 22:14:08 +0000 (15:14 -0700)]
mm/Kconfig: add MMU dependency for MIGRATION.

MIGRATION must depend on MMU, or allmodconfig for the nommu sh
architecture fails to build:

    CC      mm/migrate.o
  mm/migrate.c: In function 'remove_migration_pte':
  mm/migrate.c:134:3: error: implicit declaration of function 'pmd_trans_huge' [-Werror=implicit-function-declaration]
     if (pmd_trans_huge(*pmd))
     ^
  mm/migrate.c:149:2: error: implicit declaration of function 'is_swap_pte' [-Werror=implicit-function-declaration]
    if (!is_swap_pte(pte))
    ^
  ...

Also let CMA depend on MMU, or when NOMMU, if we select CMA, it will
select MIGRATION by force.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel: replace strict_strto*() with kstrto*()
Jingoo Han [Thu, 12 Sep 2013 22:14:07 +0000 (15:14 -0700)]
kernel: replace strict_strto*() with kstrto*()

The usage of strict_strto*() is not preferred, because strict_strto*() is
obsolete.  Thus, kstrto*() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm, thp: count thp_fault_fallback anytime thp fault fails
David Rientjes [Thu, 12 Sep 2013 22:14:06 +0000 (15:14 -0700)]
mm, thp: count thp_fault_fallback anytime thp fault fails

Currently, thp_fault_fallback in vmstat only gets incremented if a
hugepage allocation fails.  If current's memcg hits its limit or the page
fault handler returns an error, it is incorrectly accounted as a
successful thp_fault_alloc.

Count thp_fault_fallback anytime the page fault handler falls back to
using regular pages and only count thp_fault_alloc when a hugepage has
actually been faulted.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
Kirill A. Shutemov [Thu, 12 Sep 2013 22:14:05 +0000 (15:14 -0700)]
thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()

do_huge_pmd_anonymous_page() has copy-pasted piece of handle_mm_fault()
to handle fallback path.

Let's consolidate code back by introducing VM_FAULT_FALLBACK return
code.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothp: do_huge_pmd_anonymous_page() cleanup
Kirill A. Shutemov [Thu, 12 Sep 2013 22:14:03 +0000 (15:14 -0700)]
thp: do_huge_pmd_anonymous_page() cleanup

Minor cleanup: unindent most code of the fucntion by inverting one
condition.  It's preparation for the next patch.

No functional changes.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
Kirill A. Shutemov [Thu, 12 Sep 2013 22:14:01 +0000 (15:14 -0700)]
thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()

It's confusing that mk_huge_pmd() has semantics different from mk_pte() or
mk_pmd().  I spent some time on debugging issue cased by this
inconsistency.

Let's move maybe_pmd_mkwrite() out of mk_huge_pmd() and adjust prototype
to match mk_pte().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: cleanup add_to_page_cache_locked()
Kirill A. Shutemov [Thu, 12 Sep 2013 22:13:59 +0000 (15:13 -0700)]
mm: cleanup add_to_page_cache_locked()

Make add_to_page_cache_locked() cleaner:

 - unindent most code of the function by inverting one condition;
 - streamline code no-error path;
 - move insert error path outside normal code path;
 - call radix_tree_preload_end() earlier;

No functional changes.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothp: account anon transparent huge pages into NR_ANON_PAGES
Kirill A. Shutemov [Thu, 12 Sep 2013 22:13:58 +0000 (15:13 -0700)]
thp: account anon transparent huge pages into NR_ANON_PAGES

We use NR_ANON_PAGES as base for reporting AnonPages to user.  There's
not much sense in not accounting transparent huge pages there, but add
them on printing to user.

Let's account transparent huge pages in NR_ANON_PAGES in the first place.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Ning Qu <quning@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>