]>
git.proxmox.com Git - pve-manager.git/log
Wolfgang Bumiller [Tue, 2 Apr 2019 10:22:05 +0000 (12:22 +0200)]
add u2f-api.js
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Wolfgang Bumiller [Tue, 2 Apr 2019 10:22:04 +0000 (12:22 +0200)]
store u2f challenges in the rpc environment
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Thomas Lamprecht [Wed, 3 Apr 2019 10:56:28 +0000 (12:56 +0200)]
fixup whitespaces
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Friedrich Ramberger [Wed, 3 Apr 2019 08:25:06 +0000 (08:25 +0000)]
Add Ceph, iscsi and more disk and zfs information to pvereport
Following items added to pvereport:
* more details about disks
* iscsi information
* more zfs information
* ceph information (only when ceph.conf exists)
When running from command line now report progress is shown at the console (STDERR)
Christian Ebner [Wed, 3 Apr 2019 07:26:32 +0000 (09:26 +0200)]
fix: #1145 enable CT/VM firewall by default on creation via WebUI
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Thomas Lamprecht [Tue, 2 Apr 2019 10:53:32 +0000 (12:53 +0200)]
follow up: newline at end of file
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Tue, 2 Apr 2019 10:16:50 +0000 (12:16 +0200)]
adapt ceph log for new logview
since there is no 'doAttemptLoad' anymore, we use the
failCallback to overwrite the behaviour
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Christian Ebner [Mon, 1 Apr 2019 12:45:11 +0000 (14:45 +0200)]
Allow to set the firewall log rate limit and burst from the UI
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Tim Marx [Mon, 1 Apr 2019 11:31:24 +0000 (13:31 +0200)]
ui: ceph installer: set initial tab depending on current state
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Sat, 30 Mar 2019 14:21:12 +0000 (15:21 +0100)]
ui: ct/vm: add tooltip to hibernate and stop button
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Fri, 29 Mar 2019 09:44:36 +0000 (10:44 +0100)]
gui: show Resume button if suspended
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Fri, 29 Mar 2019 09:44:35 +0000 (10:44 +0100)]
gui: add Hibernate/Pause to CmdMenu/Shutdown Menu
and have it in order of impact on the guest
(pause, hibernate, poweroff, stop)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Fri, 29 Mar 2019 09:44:34 +0000 (10:44 +0100)]
gui: CmdMenu: rename suspend to paus
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Fri, 29 Mar 2019 09:44:33 +0000 (10:44 +0100)]
gui: CmdMenu: hide the start and suspend button conditionally
only to disable them wastes space for no reason and might confuse users
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Fri, 29 Mar 2019 12:12:11 +0000 (13:12 +0100)]
fixup trailing whitespaces
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Fri, 29 Mar 2019 11:42:44 +0000 (12:42 +0100)]
ui: ceph install: remove advanced option pg_bits
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Tim Marx [Fri, 29 Mar 2019 11:42:43 +0000 (12:42 +0100)]
ui: ceph: differentiate between install & configure only
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 16:53:28 +0000 (17:53 +0100)]
followup: remove unnecessary references
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 16:51:47 +0000 (17:51 +0100)]
fix schema error: do not submit efidisk checkbox value
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:11 +0000 (16:25 +0100)]
gui: qemu/HardwareView: add machine to HardwareView
so the user can edit this via the gui
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:10 +0000 (16:25 +0100)]
gui: qemu/HardwareView: move scsihw and bios to HardwareView
it is guest hardware and not really an option, and we have it now
in the wizard, so it makes sense to have it here
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:09 +0000 (16:25 +0100)]
gui: qemu/HardwareView: remove Keyboard setting
this is deprecated and should not be necessary anymore, since
qemu and novnc can handle this better if no keyboard layout is set
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:08 +0000 (16:25 +0100)]
gui: qemu/HardwareView: add space between groups
so that we can add items between them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:07 +0000 (16:25 +0100)]
gui: add system panel to the vm creation wizard
for this we have to adapt the scsiController logic slightly, so that
the ostype change sets the viewmodel, which in turn changes the
bound fields (one one the system tab, and the displayfield on the hd tab)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:06 +0000 (16:25 +0100)]
gui: add qemu/SystemEdit
contains the inputpanel for the coming system tab in the vm creation
wizard, where the user can configure the vm system hardware like
the scsi controller, display, etc.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:05 +0000 (16:25 +0100)]
gui: DiskStorageSelector: implement disabling
this patch implements disabling for the DiskStorageSelector, which
resets the storage and triggers a validity change
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 28 Mar 2019 15:25:04 +0000 (16:25 +0100)]
gui: qemu/HardwareView: prepare Hardwareview for font-awesome icons
we want to be able to use fontawesome icons directly instead of having
to use extracted png in css classes
this patch makes it possible to use 'iconCls' with the font-awesome icon name
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 16:00:32 +0000 (17:00 +0100)]
ceph install/config: add hint for additional monitors
this info was already here in the heading once, add it as pve-hint
styled display field at the bottom.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 15:59:00 +0000 (16:59 +0100)]
ceph install/config: remove node displayfield
does not brings real value here, one sees the selected node also
through the blur, and it shouldn't matter at this point, the cluster
config is for all nodes (using ceph) and the monitor has its own node
selector anyway, so do not cloud user interface to much.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 15:56:52 +0000 (16:56 +0100)]
fixup: ceph: do not scream at user with html headings
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Thu, 28 Mar 2019 11:16:04 +0000 (12:16 +0100)]
ui: ceph installer: mask configuration if not needed & add monitor
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 15:16:03 +0000 (16:16 +0100)]
fixup: remove allowBlank and ensure interworking of size is correct
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Thu, 28 Mar 2019 11:16:03 +0000 (12:16 +0100)]
ui: ceph installer: make replicas & minreplicas fields dependent
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Tim Marx [Thu, 28 Mar 2019 11:16:05 +0000 (12:16 +0100)]
ui: ceph installer: adapt wording of further instructions
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Tim Marx [Thu, 28 Mar 2019 11:16:06 +0000 (12:16 +0100)]
api: ceph: ensure calls get proxied to correct node
If calls aren't proxied to the selected node, which seems legit in
some cases, this will cause some misleading errors while ceph is
not installed on that node. Therefor the calls should now always get
proxied.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Oguz Bektas [Thu, 28 Mar 2019 13:02:20 +0000 (14:02 +0100)]
add 'pvs' to pvereport
get information about physical volumes
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Thomas Lamprecht [Thu, 28 Mar 2019 12:23:42 +0000 (13:23 +0100)]
pveceph install: be a bit more verbose
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Tue, 26 Mar 2019 07:11:25 +0000 (08:11 +0100)]
add tooltips to the tree
to give the user better feedback about the various icons (play, pause,
warning, error, etc) add a tooltip to the tree elements which
contain that information
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Mon, 25 Mar 2019 11:53:43 +0000 (12:53 +0100)]
use localhost instead of 127.0.0.1 to listen with spiceterm
that is the name we use to connect from spiceproxy and can be either
ipv4 or ipv6
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Mon, 25 Mar 2019 12:33:05 +0000 (13:33 +0100)]
api/ceph: allow default value for service start/stop
it's a bit strange that one cannot pass the default value explicitly,
helpfull when calling this API path through the CLI envrionment,
which currently cannot have optional fixed-positioned default values
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Fri, 22 Mar 2019 12:49:52 +0000 (13:49 +0100)]
allow deletion of mac prefix
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Thu, 21 Mar 2019 09:55:20 +0000 (10:55 +0100)]
gui: show lock in status bar of vms/cts
also add 'tbarSpacing' parameter to ConfigPanel, that controls
the spacing after the title
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Wed, 20 Mar 2019 09:42:22 +0000 (10:42 +0100)]
ui: ceph install: do not translate replicas
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 20 Mar 2019 08:58:02 +0000 (09:58 +0100)]
followup: move to advanced column
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Christian Ebner [Tue, 19 Mar 2019 16:16:22 +0000 (17:16 +0100)]
fix: # 2123 Logging of user defined firewall rules
This patch relies on the corresponding patch to pve-firewall, adding the user
defined log levels for firewall rules.
By this, the user can select a per-rule log level for self defined rules. These
are independent of the global log level, which is defined in the firewall options.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Thomas Lamprecht [Tue, 19 Mar 2019 09:47:36 +0000 (10:47 +0100)]
api/apt: remove unused variable
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Mon, 18 Mar 2019 11:25:26 +0000 (12:25 +0100)]
d/control: bump libpve-access-control version dependency
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fabian Grünbichler [Wed, 13 Mar 2019 14:01:34 +0000 (15:01 +0100)]
pvestatd: rotate auth keys if necessary
as a fallback to ensure rotation even if no logins happen on a given
cluster.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tim Marx [Fri, 15 Mar 2019 09:52:02 +0000 (10:52 +0100)]
check for ceph inited at status api
As this is now the default behavior in all other ceph api endpoints,
I adapted the status api correspondingly.
We also pass our ceph configuration file directly when connecting to
RADOS, so a /etc/ceph/ceph.conf isn't necessarily required to
indicate a fully setup and enabled PVE-ceph environment.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Fri, 15 Mar 2019 09:59:10 +0000 (10:59 +0100)]
fix #2132: gui: set vcpu default maxValue to 1
else one can set it to higher values if the vm has one socket with one core
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Wed, 13 Mar 2019 13:59:35 +0000 (14:59 +0100)]
pvereport: ensure IPv6 and IPv4 route info is included
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reported-by: Mira Limbeck <m.limbeck@proxmox.com>
Thomas Lamprecht [Fri, 8 Mar 2019 09:20:56 +0000 (10:20 +0100)]
pvereport: add cluster resources node information
gives a good overview over the cluster, which nodes are online,
memory/cpu load, uptime...
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Fri, 8 Mar 2019 09:19:42 +0000 (10:19 +0100)]
pvereport: add ip route information
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Wed, 13 Mar 2019 12:15:02 +0000 (13:15 +0100)]
add host firewall config to pvereport
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Christian Ebner [Wed, 13 Mar 2019 08:57:31 +0000 (09:57 +0100)]
1145 Warn if datacenter firewall is disabled
This warns the user that the datacenter firewall is disabled when editing the
host or the VM/CT firewall status.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Thomas Lamprecht [Tue, 12 Mar 2019 11:38:04 +0000 (12:38 +0100)]
bump version to 5.3-12
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Tue, 12 Mar 2019 10:45:27 +0000 (11:45 +0100)]
ui: ceph install: fixup configuration network fields
It's not only 'IPv4/CIDR' but 'IP/CIDR', IPv6 works too so generalize
this.
Also make the cluster network emptytext a bit more expressive.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Tue, 12 Mar 2019 08:53:21 +0000 (09:53 +0100)]
adapt ceph installer texts
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Tue, 12 Mar 2019 08:53:07 +0000 (09:53 +0100)]
ui: ceph install: fixup gettext string
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Herman van Rink [Mon, 11 Mar 2019 10:20:59 +0000 (11:20 +0100)]
Remove typo from vzdump.conf
Tim Marx [Wed, 6 Mar 2019 11:29:40 +0000 (12:29 +0100)]
added basic ability to install ceph via gui
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tim Marx [Wed, 6 Mar 2019 11:29:39 +0000 (12:29 +0100)]
add cmd parameter & rework query string creation
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tim Marx [Wed, 6 Mar 2019 11:29:38 +0000 (12:29 +0100)]
added new parameter to pass a command to the newly opened terminal
Ext.urlEncode is deprecated, use Ext.Object.toQueryString instead
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Wed, 6 Mar 2019 08:59:23 +0000 (09:59 +0100)]
fix #2122: use correct format in help text of timefield
this is shown on mouseover and read by textreaders
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Fri, 1 Mar 2019 13:27:49 +0000 (14:27 +0100)]
add subscription panel on dc summary
So that the users have a good and fast feedback about ther
support and subscripttion status, especially if they have
mistakenly different levels of susbscriptions in their cluster.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tim Marx [Wed, 27 Feb 2019 14:01:20 +0000 (15:01 +0100)]
add pveceph install to shell api
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Thu, 28 Feb 2019 12:05:46 +0000 (13:05 +0100)]
followup: fix whitespace error
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Wed, 27 Feb 2019 14:01:19 +0000 (15:01 +0100)]
deprecate old upgrade property
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Thu, 28 Feb 2019 12:04:10 +0000 (13:04 +0100)]
api/nodes: fix variable name style: s/cmdMapper/shell_cmd_map/
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tim Marx [Wed, 27 Feb 2019 14:01:16 +0000 (15:01 +0100)]
unified the classification of the passed command for all shell apis
As discussed on the pve-devel list [0] I extracted the identical chunks from each
shell api into one function as basis for future changes.
[0] https://pve.proxmox.com/pipermail/pve-devel/2019-January/035387.html
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Thomas Lamprecht [Wed, 27 Feb 2019 12:39:32 +0000 (13:39 +0100)]
trailing whitespace fix in Nodes
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Stoiko Ivanov [Fri, 22 Feb 2019 18:52:05 +0000 (19:52 +0100)]
remove read_proxy_conf from PVE::API2Tools
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Stoiko Ivanov [Fri, 22 Feb 2019 18:52:04 +0000 (19:52 +0100)]
pveproxy, spiceproxy: new read_proxy_conf location
read_proxy_conf was moved to the new PVE::ApiServer::Utils so that it
can be reused by other apiservers (e.g., PMG one). Use that one, so
that we can remove it here later
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Stoiko Ivanov [Fri, 22 Feb 2019 18:52:03 +0000 (19:52 +0100)]
remove default values from pveproxy ssl config
they are in PVE::APIServer::AnyEvent
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Thomas Lamprecht [Tue, 26 Feb 2019 06:21:43 +0000 (07:21 +0100)]
d/control: bump libpve-http-server-perl version dependency
In preperance for the next two commits, which use the (moved)
PVE::ApiServer::Utils module and rely on the fact that
pve-http-server now set some ssl defaults itself.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Thu, 21 Feb 2019 10:34:25 +0000 (11:34 +0100)]
fix popup behaviour in firefox with touchscreens on desktop
when the popup blocker is active, nw is undefined and nw.focus() throws an
error and the touchend event is not finished, causing extjs to retry the
touchevent and click handler, which tries to open a popup which gets blocked
here, and so on
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Thu, 21 Feb 2019 10:14:16 +0000 (11:14 +0100)]
ui: qemu/cddrive: increase width for better ux
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 20 Feb 2019 18:40:06 +0000 (19:40 +0100)]
bump version to 5.3-11
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 20 Feb 2019 18:22:01 +0000 (19:22 +0100)]
fix #2108: ceph: 'osd pools set' cannot accept integers anymore
The new luminous release 12.2.11 cherry-picked a commit[0] which
remove some legacy fallback when parsing a pool set command.
As of now only strings (which itself can then be a string, int or
float) may be passed as a value, while older also accepted an int
directly.
So ensure that all of our "osd pool set" commands pass strings, which
means that 'min_size' and 'size' must be converted to strings before
executing the command.
Without this one cannot create a CephFS over the WebUI anymore as the
create pools fails. Interestingly, the normal create pools over WebUI
still worked, as it has those two parameters exposed in the creation
formular, and thus sents them as string to the backend, while the
cephfs API does not exposes those two values at all but sets them
directly to integers. Funny stuff. CLI invocations also had the same
issue, depending on the fact if size and min_size could and got
passed (then it worked) or where omited (then it did not worked).
[0]: https://github.com/ceph/ceph/commit/
c838a0096d98d461f83c79c3acdc0ee69464e473
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 20 Feb 2019 11:29:34 +0000 (12:29 +0100)]
bump version to 5.3-10
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thomas Lamprecht [Wed, 20 Feb 2019 11:29:21 +0000 (12:29 +0100)]
d/control: bump version dependency to pve-doc-generator
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Christian Ebner [Wed, 20 Feb 2019 11:02:02 +0000 (12:02 +0100)]
Fix 1891 Generate zsh tab completion scripts for cli tools
This patch builds the zsh tab completion scripts for the cli tools of
pve-manager.
In order for it to work, the latest version of pve-common and pve-docs
including the corresponding patches have to be installed on the build
system.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Stoiko Ivanov [Tue, 19 Feb 2019 18:18:44 +0000 (19:18 +0100)]
pveproxy: honor_cipher_order by default
change the default from client preference to server preference, but leave it
configurable.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Stoiko Ivanov [Tue, 19 Feb 2019 18:18:43 +0000 (19:18 +0100)]
pveproxy: add configurable COMPRESSION
disabling http compression is considered good practice and certain TLS-testing
scripts/sites lower the security rating if it's enabled.
compression is still on by default for the potential speed/performance gain.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Stoiko Ivanov [Tue, 19 Feb 2019 18:18:42 +0000 (19:18 +0100)]
pveproxy: add configurable HONOR_CIPHER_ORDER
fix #2069 (the report includes rationale and also information on test-cases).
Tested by:
* running testssl.sh [0]
* enabling this setting (our default cipherlist prefers AES256,
chromium on stretch AES128)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Stoiko Ivanov [Fri, 15 Feb 2019 11:36:01 +0000 (12:36 +0100)]
fix typo in comment (ssl-config)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Oguz Bektas [Tue, 19 Feb 2019 11:00:35 +0000 (12:00 +0100)]
add symbol for suspended guests
use the same symbol as 'paused' guests to avoid confusion.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Dominik Csapak [Tue, 19 Feb 2019 11:00:50 +0000 (12:00 +0100)]
jslint fixes
type confusion: value is int and string
let is not recognized by our jslint version yet, so
use var for now
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Dominik Csapak [Tue, 19 Feb 2019 11:01:15 +0000 (12:01 +0100)]
BulkAction.js: fixup indentation
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Oguz Bektas [Mon, 18 Feb 2019 12:40:27 +0000 (13:40 +0100)]
add lxc restart warning to bulk migration screen
only show warning in migration window and when a running lxc container
is chosen
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Co-Authored by: Dominik Csapak <d.csapak@proxmox.com>
Oguz Bektas [Mon, 18 Feb 2019 12:40:26 +0000 (13:40 +0100)]
fix #1769: restart mode for bulk lxc migration
online mode doesn't work, and causes bulk migration of
running lxc containers to fail.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Oguz Bektas [Tue, 12 Feb 2019 14:02:08 +0000 (15:02 +0100)]
unprivileged:true by default in restore window
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Oguz Bektas [Tue, 12 Feb 2019 14:02:07 +0000 (15:02 +0100)]
unprivileged:true by default in ct creation
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Oguz Bektas [Mon, 18 Feb 2019 14:52:05 +0000 (15:52 +0100)]
fix #2096: enable resume in context menu for guest triggered sleep
We act correctly for an outside triggered suspend, but if the guest
suspends itself from inside (e.g., systemctl suspend,
`echo "standby" > /sys/power/state` or windows sleep) it has another
state (suspended vs. paused), so handled that also
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Thomas Lamprecht [Fri, 8 Feb 2019 14:25:35 +0000 (15:25 +0100)]
minor typo fix and code cleanups
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Alwin Antreich [Thu, 7 Feb 2019 15:29:42 +0000 (16:29 +0100)]
api osd/destroy: use ProcFSTools to iterate mounts
Instead of opening proc/mounts through IO::File directly for parsing,
the patch uses ProcFSTools. This way it also takes care of eventual
decoding.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Thomas Lamprecht [Fri, 8 Feb 2019 14:25:03 +0000 (15:25 +0100)]
follouwp: code cleanup
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Alwin Antreich [Thu, 7 Feb 2019 15:29:41 +0000 (16:29 +0100)]
Fix #2051: preserve DB/WAL disk on destroy
When destroying an OSD over API or CLI, e.g. by executing:
'pveceph osd destroy <num> --cleanup'
all disks associated with the OSD got wiped with dd, which included
any shared and by others still in use ones, e.g., separate disks with
DB/WAL.
The patch changes 'wipe_disks' to wipe the partition instead of the
whole disk.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Dominik Csapak [Wed, 6 Feb 2019 08:14:12 +0000 (09:14 +0100)]
gui: show Storage Content with Datastore.AllocateSpace/Audit
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Thomas Lamprecht [Fri, 1 Feb 2019 12:40:39 +0000 (13:40 +0100)]
bump version to 5.3-9
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>