About Intel Keem Bay:
-------------------
Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU.
Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst.
Pinctrl IP:
----------
The SoC has a customised pinmux controller IP which controls pin
multiplexing and configuration.
Keem Bay pinctrl IP is not based on and have nothing in common with the
existing pinctrl drivers. The registers used are incompatible with the
existing drivers, so it requires a new driver.
Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC.
Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
The original binding submission for MT8195 pinctrl described the
possible drive strength values in micro-amps in its description, but
then proceeded to list register values in its device tree binding
constraints.
However, the macros used with the Mediatek pinctrl bindings directly
specify the drive strength in micro-amps, instead of hardware register
values. The current driver implementation in Linux does convert the
value from micro-amps to hardware register values. This implementation
is also used with MT7622 and MT8183, which use real world values in
their device trees.
Given the above, it was likely an oversight to use the raw register
values in the binding. Correct the values in the binding. Also drop
the description since the binding combined with its parent,
pinctrl/pincfg.yaml, the binding is now self-describing.
1.Rename the original "dmicx" ABIs to "dmic-ifx", since these devices
have only one DMIC module which has multiple input interfaces. The
original naming is easy to make users mistakenly think that the
device has multiple dmic modules. Currently, in the mainline, no
other devicetree out there is using the "sfc" ABI, so we should be
able to replace it safely.
2.Rename the original "ssix-ce0" ABIs to "ssix-ce", since the X2000
have only one ce pin. The original naming is easy to make users
mistakenly think that the device has multiple ce pins. Currently,
in the mainline, no other devicetree out there is using the
"ssix-ce0" ABIs, so we should be able to replace it safely.
3.Split the original "sfc" ABI into "sfc-data", "sfc-ce", "sfc-clk"
to increase the flexibility when configuring the pins. Currently,
in the mainline, no other devicetree out there is using the "sfc"
ABI, so we should be able to replace it safely.
4.There is more than one compatible string in the match table, so
renaming "ingenic_xxxx_of_match[]" to "ingenic_xxxx_of_matches"
is more reasonable, and remove the unnecessary commas in
"ingenic_gpio_of_matches[]" to reduce code size as much as possible.
Randy Dunlap [Fri, 23 Jul 2021 03:48:40 +0000 (20:48 -0700)]
pinctrl: aspeed: placate kernel-doc warnings
Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using
proper kernel-doc notation.
Fixes these kernel-doc warnings:
drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Query the enabled or disabled state for a mux function's signal on a pin
drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Search for the signal expression needed to enable the pin's signal for the
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: openbmc@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Marc Zyngier [Sun, 25 Jul 2021 18:08:30 +0000 (19:08 +0100)]
pinctrl: stmfx: Fix hazardous u8[] to unsigned long cast
Casting a small array of u8 to an unsigned long is *never* OK:
- it does funny thing when the array size is less than that of a long,
as it accesses random places in the stack
- it makes everything even more fun with a BE kernel
Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.
An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.
STM32MP135 SoC embeds 9 GPIO banks of 16 gpios each. Those GPIO
banks contain same features as STM32MP157 GPIO banks except that
each GPIO line of the STM32MP135 can be secured.
Zhen Lei [Thu, 22 Jul 2021 03:39:30 +0000 (11:39 +0800)]
pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning
The value of pcs->flags is not overwritten in function
pcs_parse_bits_in_pinctrl_entry() and its subfunctions, so moving this
check to the beginning of the function eliminates unnecessary rollback
operations.
pinctrl: pinctrl-zynq: Add support for 'power-source' parameter
Add support for generic pin parameter 'power-source'.
To maintain the backward compatibility, 'io-standard' parameter is still
supported in the driver.
pinctrl: renesas: Fix pin control matching on R-Car H3e-2G
As R-Car H3 ES1.x (R8A77950) and R-Car ES2.0+ (R8A77951) use the same
compatible value, the pin control driver relies on soc_device_match()
with soc_id = "r8a7795" and the (non)matching of revision = "ES1.*" to
match with and distinguish between the two SoC variants. The
corresponding entries in the normal of_match_table are present only to
make the optional sanity checks work.
The R-Car H3e-2G (R8A779M1) SoC is a different grading of the R-Car H3
ES3.0 (R8A77951) SoC. It uses the same compatible values for individual
devices, but has an additional compatible value for the root node.
When running on an R-Car H3e-2G SoC, soc_device_match() with soc_id =
"r8a7795" does not return a match. Hence the pin control driver falls
back to the normal of_match_table, and, as the R8A77950 entry is listed
first, incorrectly uses the sub-driver for R-Car H3 ES1.x.
Fix this by moving the entry for R8A77951 before the entry for R8A77950.
Simplify sh_pfc_quirk_match() to only handle R-Car H3 ES1,x, as R-Car H3
ES2.0+ can now be matched using the normal of_match_table as well.
The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).
The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"
This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".
Change the "pwmN" groups to support "led" function.
Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.
Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group") Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: renesas: r8a77995: Add bias pinconf support
Implement support for pull-up (most pins, excl. DU_DOTCLKIN0) and
pull-down (most pins, excl. JTAG) handling for the R-Car D3 SoC, using
some parts from the common R-Car bias handling, which requires making
rcar_pin_to_bias_reg() public.
R-Car D3 needs special handling for the NFRE# (GP_3_0) and NFWE#
(GP_3_1) pins. Unlike all other pins, they are controlled by different
bits in the LSI pin pull-up/down control register (PUD2) than in the LSI
pin pull-enable register (PUEN2).
pinctrl: renesas: rcar: Avoid changing PUDn when disabling bias
When disabling pin bias, there is no need to touch the LSI pin
pull-up/down control register (PUDn), which selects between pull-up and
pull-down. Just disabling the pull-up/down function through the LSI pin
pull-enable register (PUENn) is sufficient.
I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix new bug: premature return from page_mlock_one()
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.
Fixes: cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix old bug: munlocking THP missed other mlocks
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes: 9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix comments left over from recent changes
Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.
TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Merge tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Commit dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes: dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Merge tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Merge tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Merge tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Merge tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Merge tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Merge tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Merge tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Merge branch 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
commit 03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
Merge tag 'sound-fix-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes here: the most outstanding one is the
re-application of USB-audio lowlatency support that was reverted in
the previous PR. The rest are device-specific quirks/fixes, spelling
fixes and a regression fix for the old intel8x0 driver"
* tag 'sound-fix-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: intel8x0: Fix breakage at ac97 clock measurement
ALSA: usb-audio: Reduce latency at playback start, take#2
ALSA: isa: Fix error return code in snd_cmi8330_probe()
ALSA: emux: fix spelling mistakes
ALSA: usb-audio: fix spelling mistakes
ALSA: bebob: correct duplicated entries with TerraTec OUI
ALSA: usx2y: fix spelling mistakes
ALSA: x86: fix spelling mistakes
ALSA: hda/realtek: fix mute led of the HP Pavilion 15-eh1xxx series