Deepak R Varma [Wed, 4 Nov 2020 15:03:39 +0000 (20:33 +0530)]
drm/i915/perf: replace idr_init() by idr_init_base()
idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.
References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")
drm/i915/gt: Retain default context state across shrinking
As we use a shmemfs file to hold the context state, when not in use it
may be swapped out, such as across suspend. Since we wrote into the
shmemfs without marking the pages as dirty, the contents may be dropped
instead of being written back to swap. On re-using the shmemfs file,
such as creating a new context after resume, the contents of that file
were likely garbage and so the new context could then hang the GPU.
Simply mark the page as being written when copying into the shmemfs
file, and it the new contents will be retained across swapout.
Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.8+ Link: https://patchwork.freedesktop.org/patch/msgid/20201127120718.454037-161-matthew.auld@intel.com
Chris Wilson [Thu, 26 Nov 2020 14:04:07 +0000 (14:04 +0000)]
drm/i915/gt: Move the breadcrumb to the signaler if completed upon cancel
If while we are cancelling the breadcrumb signaling, we find that the
request is already completed, move it to the irq signaler and let it be
signaled.
v2: Tweak reference counting so that we only acquire a new reference on
adding to a signal list, as opposed to a hidden i915_request_put of the
caller's reference.
Chris Wilson [Thu, 26 Nov 2020 14:04:06 +0000 (14:04 +0000)]
drm/i915/gt: Split the breadcrumb spinlock between global and contexts
As we funnel more and more contexts into the breadcrumbs on an engine,
the hold time of b->irq_lock grows. As we may then contend with the
b->irq_lock during request submission, this increases the burden upon
the engine->active.lock and so directly impacts both our execution
latency and client latency. If we split the b->irq_lock by introducing a
per-context spinlock to manage the signalers within a context, we then
only need the b->irq_lock for enabling/disabling the interrupt and can
avoid taking the lock for walking the list of contexts within the signal
worker. Even with the current setup, this greatly reduces the number of
times we have to take and fight for b->irq_lock.
Furthermore, this closes the race between enabling the signaling context
while it is in the process of being signaled and removed:
This is caused by virtual engines where although we take the breadcrumb
lock on each of the active engines, they may be different engines on
different requests, It turns out that the b->irq_lock was not a
sufficient proxy for the engine->active.lock in the case of more than
one request, so introduce an explicit lock around ce->signals.
v2: ce->signal_lock is acquired with only RCU protection and so must be
treated carefully and not cleared during reallocation. We also then need
to confirm that the ce we lock is the same as we found in the breadcrumb
list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276 Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Fixes: 2854d866327a ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-4-chris@chris-wilson.co.uk
Chris Wilson [Thu, 26 Nov 2020 14:04:05 +0000 (14:04 +0000)]
drm/i915/gt: Protect context lifetime with RCU
Allow a brief period for continued access to a dead intel_context by
deferring the release of the struct until after an RCU grace period.
As we are using a dedicated slab cache for the contexts, we can defer
the release of the slab pages via RCU, with the caveat that individual
structs may be reused from the freelist within an RCU grace period. To
handle that, we have to avoid clearing members of the zombie struct.
This is required for a later patch to handle locking around virtual
requests in the signaler, as those requests may want to move between
engines and be destroyed while we are holding b->irq_lock on a physical
engine.
v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we
don't need to reset the debug code, at the loss of having the mutex
debug code spot us attempting to destroy a locked mutex.
v3: As the intended use will remain strongly referenced counted, with
very little inflight access across reuse, drop the ctor.
v4: Drop the unrequired change to remove the temporary reference around
dropping the active context, and add back some more missing ctor
operations.
v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced
later] maybe accessed under RCU and so needs special care not to be
reinitialised.
v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration.
Chris Wilson [Thu, 26 Nov 2020 14:04:04 +0000 (14:04 +0000)]
drm/i915/gt: Check for a completed last request once
Pull the repeated check for the last active request being completed to a
single spot, when deciding whether or not execlist preemption is
required.
In doing so, we remove the tasklet kick, introduced with the completion
checks in commit 35f3fd8182ba ("drm/i915/execlists: Workaround switching
back to a completed context"), if we find the request was completed but
have not yet seen the corresponding CS event. This was devolving into a
busy spin of the tasklet while we waited for the event as the delivery
was not as instantaneous as expected. Under load this is sufficient to
exhaust the tasklet softirq timeslice, and force ksoftirqd. Quite
noticeable overhead for no apparent improvement in latency.
Chris Wilson [Thu, 26 Nov 2020 14:04:03 +0000 (14:04 +0000)]
drm/i915/gt: Decouple completed requests on unwind
Since the introduction of preempt-to-busy, requests can complete in the
background, even while they are not on the engine->active.requests list.
As such, the engine->active.request list itself is not in strict
retirement order, and we have to scan the entire list while unwinding to
not miss any. However, if the request is completed we currently leave it
on the list [until retirement], but we could just as simply remove it
and stop treating it as active. We would only have to then traverse it
once while unwinding in quick succession.
Chris Wilson [Thu, 26 Nov 2020 14:08:41 +0000 (14:08 +0000)]
drm/i915/gt: Program mocs:63 for cache eviction on gen9
Ville noticed that the last mocs entry is used unconditionally by the HW
when it performs cache evictions, and noted that while the value is not
meant to be writable by the driver, we should program it to a reasonable
value nevertheless.
As it turns out, we can change the value of mocs:63 and the value we
were programming into it would cause hard hangs in conjunction with
atomic operations.
v2: Add details from bspec about how it is used by HW
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2707 Fixes: 3bbaba0ceaa2 ("drm/i915: Added Programming of the MOCS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140841.1982-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Fri, 20 Nov 2020 09:56:36 +0000 (09:56 +0000)]
drm/i915/guc: Use correct lock for CT event handler
CT event handler is called under the gt->irq_lock from the interrupt
handling paths so make it the same from the init path. I don't think this
mismatch caused any functional issue but we need to wean the code of the
global i915->irq_lock.
Chris Wilson [Mon, 23 Nov 2020 11:37:17 +0000 (11:37 +0000)]
drm/i915/gt: Free stale request on destroying the virtual engine
Since preempt-to-busy, we may unsubmit a request while it is still on
the HW and completes asynchronously. That means it may be retired and in
the process destroy the virtual engine (as the user has closed their
context), but that engine may still be holding onto the unsubmitted
compelted request. Therefore we need to potentially cleanup the old
request on destroying the virtual engine. We also have to keep the
virtual_engine alive until after the sibling's execlists_dequeue() have
finished peeking into the virtual engines, for which we serialise with
RCU.
v2: Be paranoid and flush the tasklet as well.
v3: And flush the tasklet before the engines, as the tasklet may
re-attach an rb_node after our removal from the siblings.
Chris Wilson [Mon, 23 Nov 2020 11:37:16 +0000 (11:37 +0000)]
drm/i915/gt: Don't cancel the interrupt shadow too early
We currently want to keep the interrupt enabled until the interrupt after
which we have no more work to do. This heuristic was broken by us
kicking the irq-work on adding a completed request without attaching a
signaler -- hence it appearing to the irq-worker that an interrupt had
fired when we were idle.
Chris Wilson [Mon, 23 Nov 2020 11:37:14 +0000 (11:37 +0000)]
drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
Move the register slow register write and readback from out of the
critical path for execlists submission and delay it until the following
worker, shaving off around 200us. Note that the same signal_irq_work() is
allowed to run concurrently on each CPU (but it will only be queued once,
once running though it can be requeued and reexecuted) so we have to
remember to lock the global interactions as we cannot rely on the
signal_irq_work() itself providing the serialisation (in constrast to a
tasklet).
By pushing the arm/disarm into the central signaling worker we can close
the race for disarming the interrupt (and dropping its associated
GT wakeref) on parking the engine. If we loose the race, that GT wakeref
may be held indefinitely, preventing the machine from sleeping while
the GPU is ostensibly idle.
v2: Move the self-arming parking of the signal_irq_work to a flush of
the irq-work from intel_breadcrumbs_park().
Chris Wilson [Sat, 21 Nov 2020 19:03:52 +0000 (19:03 +0000)]
drm/i915/gt: Plug IPS into intel_rps_set
The old IPS interface did not match the RPS interface that we tried to
plug it into (bool vs int return). Once repaired, our minimal
selftesting is finally happy!
Chris Wilson [Fri, 20 Nov 2020 14:03:14 +0000 (14:03 +0000)]
drm/i915/selftests: Small tweak to put the termination conditions together
If we run out of ring space, or exceed the desired runtime, we wish to
stop the subtest. Put these checks together, so that we always keep the
requests flushed on completion.
Chris Wilson [Fri, 20 Nov 2020 14:03:12 +0000 (14:03 +0000)]
drm/i915/gem: Remove incorrect early dbg print
We print out the "logical" context support before we discover whether or
not the engines have logical contexts. No one, except Tvrtko, seems to
have noticed the error, so the debug message must not be useful to
anyone.
Tvrtko Ursulin [Thu, 19 Nov 2020 16:56:16 +0000 (16:56 +0000)]
drm/i915: Show timeline dependencies for debug
Include the signalers each request in the timeline is waiting on, as a
means to try and identify the cause of a stall. This can be quite
verbose, even as for now we only show each request in the timeline and
its immediate antecedents.
Chris Wilson [Thu, 19 Nov 2020 16:56:13 +0000 (16:56 +0000)]
drm/i915/gt: Update request status flags for debug pretty-printer
We plan to expand upon the number of available statuses for when we
pretty-print the requests along the timelines, and so need a new set of
flags. We have settled upon:
Unready [U]
- initial status after being submitted, the request is not
ready for execution as it is waiting for external fences
Ready [R]
- all fences the request was waiting on have been signaled,
and the request is now ready for execution and will be
in a backend queue
- a ready request may still need to wait on semaphores
[internal fences]
Ready/virtual [V]
- same as ready, but queued over multiple backends
Executing [E]
- the request has been transferred from the backend queue and
submitted for execution on HW
- a completed request may still be regarded as executing, its
status may not be updated until it is retired and removed
from the lists
Chris Wilson [Tue, 3 Nov 2020 20:43:07 +0000 (20:43 +0000)]
drm/i915/gvt: Remove incorrect kerneldoc marking
Just a normal comment, not a kerneldoc function description.
drivers/gpu/drm/i915/gvt/handlers.c:1666: warning: Function parameter or member 'vgpu' not described in 'bxt_ppat_low_write'
drivers/gpu/drm/i915/gvt/handlers.c:1666: warning: Function parameter or member 'offset' not described in 'bxt_ppat_low_write'
drivers/gpu/drm/i915/gvt/handlers.c:1666: warning: Function parameter or member 'p_data' not described in 'bxt_ppat_low_write'
drivers/gpu/drm/i915/gvt/handlers.c:1666: warning: Function parameter or member 'bytes' not described in 'bxt_ppat_low_write'
Chris Wilson [Wed, 18 Nov 2020 13:38:39 +0000 (13:38 +0000)]
drm/i915/gt: Remember to free the virtual breadcrumbs
Since we allocate some breadcrumbs for the virtual engine, and the
virtual engine has a custom destructor, we also need to free the
breadcrumbs after use.
Chris Wilson [Tue, 17 Nov 2020 11:30:39 +0000 (11:30 +0000)]
drm/i915/gt: Ignore dt==0 for reporting underflows
The presumption was that some time would always elapse between recording
the start and the finish of a context switch. This turns out to be a
regular occurrence and emitting a debug statement superfluous.
Lucas De Marchi [Tue, 27 Oct 2020 04:32:28 +0000 (21:32 -0700)]
drm/i915/dg1: make Wa_22010271021 permanent
Just like for rkl and tgl, this should be permanent as well for dg1
instead just for A0. The commit making it permanent for those platforms
ended up "racing" with the commit adding the DG1 WAs, so now fix that up.
Ben Skeggs [Thu, 12 Nov 2020 02:29:43 +0000 (12:29 +1000)]
drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50
Pre-NV50 chipsets don't currently use the MMU subsystem that later
chipsets use, and type_vram is negative here, leading to an OOB memory
access.
This was previously guarded by a chipset check, restore that.
Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5839172f0980 ("drm/nouveau: explicitly specify caching to use") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Dave Airlie [Fri, 13 Nov 2020 05:01:13 +0000 (15:01 +1000)]
Merge tag 'drm-intel-gt-next-2020-11-12-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- DMA mapped scatterlist fixes in i915 to unblock merging of
https://lkml.org/lkml/2020/9/27/70 (Tvrtko, Tom)
Driver Changes:
- Fix for user reported issue #2381 (Graphical output stops with "switching to inteldrmfb from simple"):
Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init (Ville, Chris)
- Fix for Tigerlake (and earlier) to avoid spurious empty CSB events leading to hang (Chris, Bruce)
- Delay execlist processing for Tigerlake to avoid hang (Chris)
- Fix for Tigerlake RCS engine health check through heartbeat (Chris)
- Fix for Tigerlake reserved MOCS entries (Ayaz, Chris)
- Fix Media power gate sequence on Tigerlake (Rodrigo)
- Enable eLLC caching of display buffers for SKL+ (Ville)
- Support parsing of oversize batches on Gen9 (Matt, Chris)
- Exclude low pages (128KiB) of stolen from use to avoid thrashing during reset (Chris)
- Flush engines before Tigerlake breadcrumbs (Chris)
- Use the local HWSP offset during submission (Chris)
- Flush coherency domains on first set-domain-ioctl (Chris, Zbigniew)
- Use the active reference on the vma while capturing to avoid use-after-free (Chris)
- Fix MOCS PTE setting for gen9+ (Ville)
- Avoid NULL dereference on IPS driver callback while unbinding i915 (Chris)
- Avoid NULL dereference from PT/PD stash allocation error (Matt)
- Hold request reference for canceling an active context (Chris)
- Avoid infinite loop on x86-32 when mapping a lot of objects (Chris)
- Disallow WC mappings when processor doesn't support them (Chris)
- Return correct error in i915_gem_object_copy_blt() error path (Dan)
- Return correct error in intel_context_create_request() error path (Maarten)
- Tune down GuC communication enabled/disabled messages to debug (Jani)
- Fix rebased commit "Remove i915_request.lock requirement for execution callbacks" (Chris)
- Cancel outstanding work after disabling heartbeats on an engine (Chris)
- Signal cancelled requests (Chris)
- Retire cancelled requests on unload (Chris)
- Scrub HW state on driver remove (Chris)
- Undo forced context restores after trivial preemptions (Chris)
- Handle PCI unbind in PMU code (Tvrtko)
- Fix CPU hotplug with multiple GPUs in PMU code (Trtkko)
- Correctly set SFC capability for video engines (Venkata)
- Update GuC code to use firmware v49.0.1 (John, Matthew B., Daniele, Oscar, Michel, Rodrigo, Michal)
- Improve GuC warnings on loading failure (John)
- Avoid ownership race in buffer pool by clearing age (Chris)
- Use MMIO to read CSB in case of failure (Chris, Mika)
- Show engine properties in engine state dump to indicate changes (Chris, Joonas)
- Break up error capture compression loops with cond_resched() (Chris)
- Reduce GPU error capture mutex hold time to avoid khungtaskd (Chris)
- Serialise debugfs i915_gem_objects with ctx->mutex (Chris)
- Always test execution status on closing the context and close if not persistent (Chris)
- Avoid mixing integer types during batch copies (Chris, Jared)
- Skip over MI_NOOP when parsing to avoid overhead (Chris)
- Hold onto an explicit ref to i915_vma_work.pinned (Chris)
- Perform all asynchronous waits prior to marking payload start (Chris)
- Pull phys pread/pwrite implementations to the backend (Matt)
- Improve record of hung engines in error state (Tvrtko)
- Allow backends to override pread implementation (Matt)
- Reinforce LRC poisoning checks to confirm context survives execution (Chris)
- Fix memory region max size calculation (Matt)
- Fix order when adding blocks to memory region (Matt)
- Eliminate unused intel_virtual_engine_get_sibling func (Chris)
- Cleanup kasan warning for on-stack (unsigned long) casting (Chris)
- Onion unwind for scratch page allocation failure (Chris)
- Poison stolen pages before use (Chris)
- Selftest improvements (Chris)
- amdgpu: Use TTM multihop
- kmb: select DRM_MIPI_DSI and depend on ARCH_KEEMBAY; Fix build warning;
Fix typos
- nouveau: Use TTM multihop; Fix out-of-bounds access
- radeon: Use TTM multihop
- ingenic: Search for scaling coefficients to to 102% of screen size
Fixed the following W=1 kernel build warnings
drivers/gpu/drm/kmb/kmb_plane.h:74:18: warning: ‘kmb_formats_v’
defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/kmb/kmb_plane.h:61:18: warning: ‘kmb_formats_g’
defined but not used [-Wunused-const-variable=]
drm/nouveau: Fix out-of-bounds access when deferencing MMU type
The value of struct drm_device.ttm.type_vram can become -1 for unknown
types of memory (see nouveau_ttm_init()). This leads to an out-of-bounds
error when accessing struct nvif_mmu.type[]:
Jianxin Xiong [Tue, 10 Nov 2020 21:41:17 +0000 (13:41 -0800)]
dma-buf: Document that dma-buf size is fixed
The fact that the size of dma-buf is invariant over the lifetime of the
buffer is mentioned in the comment of 'dma_buf_ops.mmap', but is not
documented at where the info is defined. Add the missing documentation.
Rodrigo Vivi [Wed, 11 Nov 2020 14:09:36 +0000 (09:09 -0500)]
drm/i915/tgl: Fix Media power gate sequence.
Some media power gates are disabled by default. commit 5d86923060fc
("drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating")
tried to enable it, but it duplicated an existent register.
So, the main PG setup sequences ended up overwriting it.
So, let's now merge this to the main PG setup sequence.
v2: (Chris): s/BIT/REG_BIT, remove useless comment,
remove useless =0, use the right gt,
remove rc6 sequence doubt from commit message.
Fixes: 5d86923060fc ("drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org#v5.5+ Cc: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201111072859.1186070-1-rodrigo.vivi@intel.com
Paul Cercueil [Thu, 5 Nov 2020 08:39:05 +0000 (08:39 +0000)]
drm/ingenic: ipu: Search for scaling coefs up to 102% of the screen
Increase the scaled image's theorical width/height until we find a
configuration that has valid scaling coefficients, up to 102% of the
screen's resolution. This makes sure that we can scale from almost
every resolution possible at the cost of a very small distorsion.
The CRTC_W / CRTC_H are not modified.
This algorithm was already in place but would not try to go above the
screen's resolution, and as a result would only work if the CRTC_W /
CRTC_H were smaller than the screen resolution. It will now try until it
reaches 102% of the screen's resolution.
Note that this algorithm exists mostly as a band-aid for a missing
functionality: it is not possible for userspace to request the closest
mode that would encapsulate the provided one, because the GEM buffer is
created beforehand. If there was a way to let the kernel tweak the mode,
I could write a better algorithm that would result in a better looking
picture.
Dave Airlie [Thu, 29 Oct 2020 03:58:52 +0000 (13:58 +1000)]
drm/ttm: add multihop infrastrucutre (v3)
Currently drivers get called to move a buffer, but if they have to
move it temporarily through another space (SYSTEM->VRAM via TT)
then they can end up with a lot of ttm->driver->ttm call stacks,
if the temprorary space moves requires eviction.
Instead of letting the driver do all the placement/space for the
temporary, allow it to report back (-EMULTIHOP) and a placement (hop)
to the move code, which will then do the temporary move, and the
correct placement move afterwards.
This removes a lot of code from drivers, at the expense of
adding some midlayering. I've some further ideas on how to turn
it inside out, but I think this is a good solution to the call
stack problems.
v2: separate out the driver patches, add WARN for getting
MULTHOP in paths we shouldn't (Daniel)
v3: use memset (Christian)
Jason Gunthorpe [Thu, 5 Nov 2020 17:00:19 +0000 (13:00 -0400)]
drm: remove pgprot_decrypted() before calls to io_remap_pfn_range()
commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") moves the pgprot_decrypted() into
io_remap_pfn_range(). Delete any, now confusing, open coded calls that
directly precede io_remap_pfn_range():
- drm_io_prot() is only in drm_mmap_locked() to call io_remap_pfn_range()
- fb_mmap() immediately calls vm_iomap_memory() which is a convenience
wrapper for io_remap_pfn_range()
drm: DRM_KMB_DISPLAY should depend on ARCH_KEEMBAY
The Intel Keem Bay display controller is only present on Intel Keem Bay
SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the
user about this driver when configuring a kernel without Intel Keem Bay
platform support.
Note that:
1. The dependency on ARM is dropped, as Keem Bay SoCs are only
supported in arm64 kernel builds,
2. The dependencies on OF and COMMON_CLK can be dropped for
compile-testing, as the driver builds fine regardless.
aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_unregister':
kmb_dsi.c:(.text+0xa48): undefined reference to `mipi_dsi_host_unregister'
aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_bridge_init':
kmb_dsi.c:(.text+0xb14): undefined reference to `mipi_dsi_host_register'
Fix this be selecting DRM_MIPI_DSI, like other drivers do.
Daniel Abrecht [Sun, 8 Nov 2020 21:00:01 +0000 (21:00 +0000)]
drm: mxsfb: Implement .format_mod_supported
This will make sure applications which use the IN_FORMATS blob
to figure out which modifiers they can use will pick up the
linear modifier which is needed by mxsfb. Such applications
will not work otherwise if an incompatible implicit modifier
ends up being selected.
Before commit ae1ed0093281 ("drm: mxsfb: Stop using DRM simple
display pipeline helper"), the DRM simple display pipeline
helper took care of this.
Deepak R Varma [Thu, 5 Nov 2020 17:36:46 +0000 (23:06 +0530)]
drm/vgem: replace idr_init() by idr_init_base()
idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.
References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")
Dinghao Liu [Sat, 22 Aug 2020 06:57:33 +0000 (14:57 +0800)]
drm/omap: Fix runtime PM imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Lee Jones [Thu, 5 Nov 2020 14:45:06 +0000 (14:45 +0000)]
drm/omap: dsi: Rework and remove a few unused variables
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org
Lee Jones [Thu, 5 Nov 2020 14:45:02 +0000 (14:45 +0000)]
drm/omap: omap_irq: Fix a couple of doc-rot issues
The API has been updated, but the header was not.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-5-lee.jones@linaro.org
Lee Jones [Fri, 6 Nov 2020 21:49:39 +0000 (21:49 +0000)]
drm/omap: dmm_tiler: Demote abusive use of kernel-doc format
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob@ti.com> Cc: Andy Gross <andy.gross@ti.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-10-lee.jones@linaro.org
Lee Jones [Fri, 6 Nov 2020 21:49:38 +0000 (21:49 +0000)]
drm/omap: gem: Fix misnamed and missing parameter descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-9-lee.jones@linaro.org
Maxime Ripard [Thu, 5 Nov 2020 16:45:18 +0000 (17:45 +0100)]
drm: Use state helper instead of CRTC state pointer
Many drivers reference the crtc->pointer in order to get the current CRTC
state in their atomic_begin or atomic_flush hooks, which would be the new
CRTC state in the global atomic state since _swap_state happened when those
hooks are run.
Use the drm_atomic_get_new_crtc_state helper to get that state to make it
more obvious.
drm/mediatek: Use struct dma_buf_map in GEM vmap ops
Fixes a build failure with mediatek.
This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
mediatek was forgotten.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Eric Anholt <eric@anholt.net> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arunpravin <apaneers@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Madhav Chauhan <madhav.chauhan@amd.com> Cc: Nirmoy Das <Nirmoy.Das@amd.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-3-tzimmermann@suse.de
This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
msm was forgotten.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Eric Anholt <eric@anholt.net> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arunpravin <apaneers@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Madhav Chauhan <madhav.chauhan@amd.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Qinglang Miao <miaoqinglang@huawei.com> Cc: dri-devel@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-2-tzimmermann@suse.de
Dave Airlie [Tue, 10 Nov 2020 07:48:47 +0000 (17:48 +1000)]
Merge tag 'amd-drm-next-5.11-2020-11-05' of git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
Matthew Auld [Mon, 9 Nov 2020 11:12:49 +0000 (11:12 +0000)]
drm/i915/region: fix order when adding blocks
When performing an allocation we try split it down into the largest
possible power-of-two blocks/pages-sizes, and for the common case we
expect to allocate the blocks in descending order. This also naturally
fits with our GTT alignment tricks(including the hugepages selftest),
where we sometimes try to align to the largest possible GTT page-size
for the allocation, in the hope that translates to bigger GTT
page-sizes. Currently, we seem to incorrectly add the blocks in the
opposite order, which is definitely not the intended behaviour.
Reported-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201109111249.109365-1-matthew.auld@intel.com
Tvrtko Ursulin [Thu, 5 Nov 2020 11:38:42 +0000 (11:38 +0000)]
drm/i915: Use ABI engine class in error state ecode
Instead of printing out the internal engine mask, which can change between
kernel versions making it difficult to map to actual engines, present a
bitmask of hanging engines ABI classes. For example:
[drm] GPU HANG: ecode 9:8:24dffffd, in gem_exec_schedu [1334]
Engine ABI class is useful to quickly categorize render vs media etc hangs
in bug reports. Considering virtual engine even more so than the current
scheme.
Tvrtko Ursulin [Wed, 4 Nov 2020 13:47:42 +0000 (13:47 +0000)]
drm/i915: Improve record of hung engines in error state
Between events which trigger engine and GPU resets and capturing the error
state we lose information on which engine triggered the reset. Improve
this by passing in the hung engine mask down to error capture.
Result is that the list of engines in user visible "GPU HANG: ecode
<gen>:<engines>:<ecode>, <process>" is now a list of hanging and not just
active engines. Most importantly the displayed process is now the one
which was actually hung.
drm/cma-helper: Make default object functions the default
As GEM object functions are now mandatory, DRM drivers based on CMA
helpers either set them in their implementation of gem_create_object,
or use the default via drm_gem_cma_create_object_default_funcs().
Simplify this by setting the default CMA object functions for all
objects that don't have any functions of their own. Follows the pattern
of similar code in SHMEM and VRAM helpers. The function
drm_gem_cma_create_object_default_funcs() is redundant and therefore
being removed.
At least sparc64 requires I/O-specific access to framebuffers. This
patch updates the fbdev console accordingly.
For drivers with direct access to the framebuffer memory, the callback
functions in struct fb_ops test for the type of memory and call the rsp
fb_sys_ of fb_cfb_ functions. Read and write operations are implemented
internally by DRM's fbdev helper.
For drivers that employ a shadow buffer, fbdev's blit function retrieves
the framebuffer address as struct dma_buf_map, and uses dma_buf_map
interfaces to access the buffer.
The bochs driver on sparc64 uses a workaround to flag the framebuffer as
I/O memory and avoid a HW exception. With the introduction of struct
dma_buf_map, this is not required any longer. The patch removes the rsp
code from both, bochs and fbdev.
v7:
* use min_t(size_t,) (kernel test robot)
* return the number of bytes read/written, if any (fbdev testcase)
v5:
* implement fb_read/fb_write internally (Daniel, Sam)
v4:
* move dma_buf_map changes into separate patch (Daniel)
* TODO list: comment on fbdev updates (Daniel)
drm/gem: Store client buffer mappings as struct dma_buf_map
Kernel DRM clients now store their framebuffer address in an instance
of struct dma_buf_map. Depending on the buffer's location, the address
refers to system or I/O memory.
Callers of drm_client_buffer_vmap() receive a copy of the value in
the call's supplied arguments. It can be accessed and modified with
dma_buf_map interfaces.
v6:
* don't call page_to_phys() on framebuffers in I/O memory;
warn instead (Daniel)
drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
drm/ttm: Add vmap/vunmap to TTM and TTM GEM helpers
The new functions ttm_bo_{vmap,vunmap}() map and unmap a TTM BO in kernel
address space. The mapping's address is returned as struct dma_buf_map.
Each function is a simplified version of TTM's existing kmap code. Both
functions respect the memory's location ani/or writecombine flags.
On top TTM's functions, GEM TTM helpers got drm_gem_ttm_{vmap,vunmap}(),
two helpers that convert a GEM object into the TTM BO and forward the call
to TTM's vmap/vunmap. These helpers can be dropped into the rsp GEM object
callbacks.
v5:
* use size_t for storing mapping size (Christian)
* ignore premapped memory areas correctly in ttm_bo_vunmap()
* rebase onto latest TTM interfaces (Christian)
* remove BUG() from ttm_bo_vmap() (Christian)
v4:
* drop ttm_kmap_obj_to_dma_buf() in favor of vmap helpers (Daniel,
Christian)
The functions exynos_drm_gem_prime_{vmap,vunmap}() are empty. Remove
them before changing the interface to use struct drm_buf_map. As a side
effect of removing drm_gem_prime_vmap(), the error code changes from
ENOMEM to EOPNOTSUPP.
Alex Shi [Sun, 8 Nov 2020 08:01:59 +0000 (16:01 +0800)]
video: fbdev: riva: remove some unused varibles
Couple of variables are actually useless, remove them to save some gcc
warning:
drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable
‘color_key_enable’ set but not used [-Wunused-but-set-variable]
Stephen Boyd [Fri, 6 Nov 2020 18:23:33 +0000 (10:23 -0800)]
drm/panel: simple: Add flags to boe_nv133fhm_n61
Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.
Cc: Douglas Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org
Linus Torvalds [Sun, 8 Nov 2020 19:30:25 +0000 (11:30 -0800)]
Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core documentation fixes from Greg KH:
"Some small Documentation fixes that were fallout from the larger
documentation update we did in 5.10-rc2.
Nothing major here at all, but all of these have been in linux-next
and resolve build warnings when building the documentation files"
* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: remove mic/index from misc-devices/index.rst
scripts: get_api.pl: Add sub-titles to ABI output
scripts: get_abi.pl: Don't let ABI files to create subtitles
docs: leds: index.rst: add a missing file
docs: ABI: sysfs-class-net: fix a typo
docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
Linus Torvalds [Sun, 8 Nov 2020 19:28:08 +0000 (11:28 -0800)]
Merge tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a small number of small tty and serial fixes for some
reported problems for the tty core, vt code, and some serial drivers.
They include fixes for:
- a buggy and obsolete vt font ioctl removal
- 8250_mtk serial baudrate runtime warnings
- imx serial earlycon build configuration fix
- txx9 serial driver error path cleanup issues
- tty core fix in release_tty that can be triggered by trying to bind
an invalid serial port name to a speakup console device
Almost all of these have been in linux-next without any problems, the
only one that hasn't, just deletes code :)"
* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Disable KD_FONT_OP_COPY
tty: fix crash in release_tty if tty->port is not set
serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
serial: 8250_mtk: Fix uart_get_baud_rate warning
Daniel Vetter [Sun, 8 Nov 2020 15:38:06 +0000 (16:38 +0100)]
vt: Disable KD_FONT_OP_COPY
It's buggy:
On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.
Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016
Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken
https://github.com/systemd/systemd/pull/3651
So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.
Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.
Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:
/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);
Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.
v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Linus Torvalds [Sun, 8 Nov 2020 18:23:07 +0000 (10:23 -0800)]
Merge tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized struct problem
- Fix an iomap problem zeroing unwritten EOF blocks
- Fix some clumsy error handling when writeback fails on filesystems
with blocksize < pagesize
- Fix a retry loop not resetting loop variables properly
- Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
actually does permit that combination
- Fix excessive page cache flushing when unsharing part of a file
* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only flush the unshared range in xfs_reflink_unshare
xfs: fix scrub flagging rtinherit even if there is no rt device
xfs: fix missing CoW blocks writeback conversion retry
iomap: clean up writeback state logic on writepage error
iomap: support partial page discard on writeback block mapping failure
xfs: flush new eof page on truncate to avoid post-eof corruption
xfs: set xefi_discard when creating a deferred agfl free log intent item
Linus Torvalds [Sun, 8 Nov 2020 18:11:31 +0000 (10:11 -0800)]
Merge branch 'hch' (patches from Christoph)
Merge procfs splice read fixes from Christoph Hellwig:
"Greg reported a problem due to the fact that Android tests use procfs
files to test splice, which stopped working with the changes for
set_fs() removal.
This series adds read_iter support for seq_file, and uses those for
various proc files using seq_file to restore splice read support"
[ Side note: Christoph initially had a scripted "move everything over"
patch, which looks fine, but I personally would prefer us to actively
discourage splice() on random files. So this does just the minimal
basic core set of proc file op conversions.
For completeness, and in case people care, that script was
sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'
but I'll wait and see if somebody has a strong argument for using
splice on random small /proc files before I'd run it on the whole
kernel. - Linus ]
* emailed patches from Christoph Hellwig <hch@lst.de>:
proc "seq files": switch to ->read_iter
proc "single files": switch to ->read_iter
proc/stat: switch to ->read_iter
proc/cpuinfo: switch to ->read_iter
proc: wire up generic_file_splice_read for iter ops
seq_file: add seq_read_iter
Linus Torvalds [Sun, 8 Nov 2020 18:09:36 +0000 (10:09 -0800)]
Merge tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
integrated assembler upset
- Correct the mitigation selection logic which prevented the related
prctl to work correctly
- Make the UV5 hubless system work correctly by fixing up the
malformed table entries and adding the missing ones"
* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Recognize UV5 hubless system identifier
x86/platform/uv: Remove spaces from OEM IDs
x86/platform/uv: Fix missing OEM_TABLE_ID
x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
Linus Torvalds [Sun, 8 Nov 2020 18:05:10 +0000 (10:05 -0800)]
Merge tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for the perf core plugging a memory leak in the address
filter parser"
* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix a memory leak in perf_event_parse_addr_filter()
Linus Torvalds [Sun, 8 Nov 2020 17:56:37 +0000 (09:56 -0800)]
Merge tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Thomas Gleixner:
"A single fix for the futex code where an intermediate state in the
underlying RT mutex was not handled correctly and triggering a BUG()
instead of treating it as another variant of retry condition"
* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Handle transient "ownerless" rtmutex state correctly
projects / mirror_ubuntu-jammy-kernel.git / log