Tetsuo Handa [Sat, 29 Mar 2014 06:39:24 +0000 (15:39 +0900)]
UBUNTU: SAUCE: kthread: Do not leave kthread_create() immediately upon SIGKILL.
Commit 786235ee "kthread: make kthread_create() killable" changed to
leave kthread_create() as soon as receiving SIGKILL. But this change
caused boot failures if systemd-udevd worker process received SIGKILL
due to systemd's hardcoded 30 seconds timeout while loading fusion
driver using finit_module() [1].
Linux kernel people think that the systemd's hardcoded timeout is a
systemd bug. But systemd people think that loading of kernel module
needs more than 30 seconds is a kernel module's bug.
Although Linux kernel people are expecting fusion driver module not
to take more than 30 seconds, it will definitely not in time for
trusty kernel. Also, nobody can prove that fusion driver module is
the only case which is affected by commit 786235ee.
Therefore, this patch changes kthread_create() to wait for up to 10
seconds after receiving SIGKILL, unless chosen by the OOM killer,
in order to give the kthreadd a chance to complete the request.
The side effect of this patch is that current thread's response to
SIGKILL is delayed for a bit (likely less than a second, unlikely
10 seconds).
Andy Whitcroft [Wed, 16 Apr 2014 18:40:57 +0000 (19:40 +0100)]
UBUNTU: SAUCE: vt -- maintain bootloader screen mode and content until vt switch
Introduce a new VT mode KD_TRANSPARENT which endevours to leave the current
content of the framebuffer untouched. This allows the bootloader to insert
a graphical splash and have the kernel maintain it until the OS splash
can take over. When we finally switch away (either through programs like
plymouth or manually) the content is lost and the VT reverts to text mode.
Seth Forshee [Tue, 17 Jan 2017 21:19:39 +0000 (15:19 -0600)]
UBUNTU: SAUCE: (no-up) i915: Remove MODULE_FIRMWARE statements for unreleased firmware
BugLink: http://bugs.launchpad.net/bugs/1626740
Intel has added MODULE_FIRMWARE statements to i915 which refer to
firmware files that they have not yet pushed out to upstream
linux-firmware. This causes the following warnings when
generating the initrd:
W: Possible missing firmware /lib/firmware/i915/kbl_guc_ver9_14.bin for module i915
W: Possible missing firmware /lib/firmware/i915/bxt_guc_ver8_7.bin for module i915
This firmware is clearly optional, and the warnings have been
generating a lot of confusion for users. Remove the offending
MODULE_FIRMWARE statements until Intel makes these files
available.
Steve Beattie [Tue, 10 May 2016 11:44:04 +0000 (12:44 +0100)]
UBUNTU: SAUCE: (no-up) disable -pie when gcc has it enabled by default
In Ubuntu 16.10, gcc's defaults have been set to build Position
Independent Executables (PIE) on amd64 and ppc64le (gcc was configured
this way for s390x in Ubuntu 16.04 LTS). This breaks the kernel build on
amd64. The following patch disables pie for x86 builds (though not yet
verified to work with gcc configured to build PIE by default i386 --
we're not planning to enable it for that architecture).
The intent is for this patch to go upstream after expanding it to
additional architectures where needed, but I wanted to ensure that
we could build 16.10 kernels first. I've successfully built kernels
and booted them with this patch applied using the 16.10 compiler.
Patch is against yakkety.git, but also applies with minor movement
(no fuzz) against current linus.git.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
[apw@canonical.com: shifted up so works in arch/<arch/Makefile.] BugLink: http://bugs.launchpad.net/bugs/1574982 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com>
UBUNTU: SAUCE: (no-up) ACPI: Disable Windows 8 compatibility for some Lenovo ThinkPads
The AML implementation for brightness control on several ThinkPads
contains a workaround to meet a Windows 8 requirement of 101 brightness
levels [1]. The implementation is flawed, as only 16 of the brighness
values reported by _BCL affect a change in brightness. _BCM silently
discards the rest of the values. Disabling Windows 8 compatibility on
these machines reverts them to the old behavior, making _BCL only report
the 16 brightness levels which actually work. Add a quirk to do this
along with a dmi callback to disable Win8 compatibility.
The kernel boot parameter 'nr_cpus=' allows one to specify number of
possible cpus in the system. In the normal scenario the first cpu (cpu0)
that shows up is the boot cpu and hence it gets covered under nr_cpus
limit.
But this assumption will be broken in kdump scenario where kdump kenrel
after a crash can boot up on an non-zero boot cpu. The paca structure
allocation depends on value of nr_cpus and is indexed using logical cpu
ids. This definetly will be an issue if boot cpu id > nr_cpus
This patch modifies allocate_pacas() and smp_setup_cpu_maps() to
accommodate boot cpu for the case where boot_cpuid > nr_cpu_ids.
This change would help to reduce the memory reservation requirement for
kdump on ppc64.
BugLink: http://bugs.launchpad.net/bugs/1558828
In case of ARCH_THUNDER, there is a need to allocate the GICv3 ITS table
which is bigger than the allowed max order. So we are forcing it only in
case of 4KB page size.
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com>
[ dannf: Depend on ARM64_4K_PAGES instead of !ARM64_64K_PAGES now that
16K pages are available ] Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Mehmet Kayaalp [Thu, 10 Mar 2016 21:22:13 +0000 (16:22 -0500)]
UBUNTU: SAUCE: (noup) KEYS: Support for inserting a certificate into x86 bzImage
BugLink: http://bugs.launchpad.net/bugs/1558553
The config option SYSTEM_EXTRA_CERTIFICATE reserves space in vmlinux file,
which is compressed to create the self-extracting bzImage. This patch adds the
capability of extracting the vmlinux, inserting the certificate, and
repackaging the result into a bzImage.
It only works if the resulting compressed vmlinux is smaller than the original.
Otherwise re-linking would be required. To make the reserved space allocate
actual space in bzImage, a null key is inserted into vmlinux before creating
the bzImage:
make vmlinux
scripts/insert-sys-cert -b vmlinux -c /dev/null
make bzImage
After null key insertion, the script populates the rest of the reserved space
with random bytes, which have poor compression. After receiving a bzImage that
is created this way, actual certificate can be inserted into the bzImage:
Andy Whitcroft [Fri, 27 Nov 2015 17:38:30 +0000 (17:38 +0000)]
UBUNTU: SAUCE: (no-up) add compat_uts_machine= kernel command line override
We wish to use the arm64 buildds to build armhf binaries in 32bit chroots.
To make this work we need uname to return armv7l machine type. To achieve
this add a kernel command line override for the 32bit machine type.
Add compat_uts_machine=<type> to allow the LINUX32 personality to return
that type for uname.
BugLink: http://bugs.launchpad.net/bugs/1210848
On an ASUSTek G60JX laptop, the intel_ips driver spams the log with a warning message: "ME failed to update for more than 1s, likely hung". This ME doesn't support the feature, so requesting it be blacklisted for now.
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Nick Jenkins <tech.crew.jenkins@gmail.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
UBUNTU: SAUCE: (no-up) trace: add trace events for open(), exec() and uselib() (for v3.7+)
BugLink: http://bugs.launchpad.net/bugs/462111
This patch uses TRACE_EVENT to add tracepoints for the open(),
exec() and uselib() syscalls so that ureadahead can cheaply trace
the boot sequence to determine what to read to speed up the next.
It's not upstream because it will need to be rebased onto the syscall
trace events whenever that gets merged, and is a stop-gap.
[apw@canonical.com: updated for v3.7 and later.]
[apw@canonical.com: updated for v3.19 and later.] BugLink: http://bugs.launchpad.net/bugs/1085766 Signed-off-by: Scott James Remnant <scott@ubuntu.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Conflicts:
fs/open.c
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Xiangliang Yu [Thu, 7 Mar 2013 14:29:16 +0000 (14:29 +0000)]
UBUNTU: SAUCE: (no-up) PCI: fix system hang issue of Marvell SATA host controller
BugLink: http://bugs.launchpad.net/bugs/1159863
Hassle someone if this patch hasn't been removed by 13.10.
See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159863/comments/2
Fix system hang issue: if first accessed resource file of BAR0 ~
BAR4, system will hang after executing lspci command
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Instead of SEMI_MT, present a full mt interface with simulated contact
positions for >=3 fingers. Enables e.g. multi-finger tap and drag for
old userspace applications which only count the contact positions.
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1084192
Reverting this in the kernel as opposed to adding a sysctl
to the procps package guarentees that this regression will be
propagated to the Raring LTS kernel.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
The Myricom GB driver firmware is no longer in use. Furthermore,
CONFIG_MYRI_SBUS is no longer defined.
Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Andy Whitcroft [Tue, 3 Apr 2012 10:42:41 +0000 (11:42 +0100)]
UBUNTU: SAUCE: (no-up) elide some ioctl warnings which are known benign
BugLink: http://bugs.launchpad.net/bugs/972355
We have been seeing increasing reports of scarey ioctl messages in
dmesg, such as the below often in bulk:
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
Looking at the upstream discussions these are all benign and can be safely
suppressed. This patch is based on some discussions at the link below,
on some work SUSE did in this area. This is not suitable for upstreaming
as we need some refactoring to fix the 32bit compat ioctl mess.
Andy Whitcroft [Fri, 3 Dec 2010 09:51:33 +0000 (09:51 +0000)]
UBUNTU: SAUCE: (no-up) add support for installed header files to ubuntu directory
BugLink: http://bugs.launchpad.net/bugs/684666
We need the aufs headers in the linux-libc-headers, add support for
including files from the ubuntu include directory.
Andy Whitcroft [Thu, 11 Mar 2010 10:33:36 +0000 (10:33 +0000)]
UBUNTU: SAUCE: (no-up) cdrom -- default to not locking the tray when in use
BugLink: http://bugs.launchpad.net/bugs/397734
It seems that users are have a high expectation that the eject button
on their CDROM drive will eject the disk regardless of whether it is in
use or not. To this end we are now changing the default LOCK mode for
mounted CDROMS to 0 to allow ejects. This however does not handle the
direct open cases like music and video players. From the launchpad bug
commentary:
So, according to the upstream discussion David Zeuthen recommended
to just not lock CD-ROM trays by default. Kernel/userspace already
handles prematurely removed USB storage devices reasonably, and with
read-only devices like CD-ROMs it is even less of an issue. So we
should just set /proc/sys/dev/cdrom/lock to 0 by default.
Note that we still will have the drive mounted after the eject. There is a
media change uevent generated and this will be used to trigger the unmount
of the drive in udisks. The burner software will also have to be looked
at to ensure they are explicitly locking the drive closed during the burn.
This will all be handled under the bug above.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Colin King <colin.king@canonical.com>
UBUNTU: SAUCE: (no-up) nbd: Change default partitions per device to 15
This was previously changed by using an "options" line in a modprobe.d
file, however that practice is now deprecated. This is because module
names, option names, their values and even their current defaults can
all change inside the kernel and module-init-tools has never been kept
in sync.
In addition, changing the kernel means that the option change will apply
if the module is built in by users or the OEM team.
Bug: #342563
Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"The two indirect syscall fixes have sat in linux-next for a few days.
I did check back with a hardware designer to ensure a SYNC is really
what's required for the GIC fix and so the GIC fix didn't make it into
to linux-next in time for this final pull request.
It builds in local build tests and passes Imagination's test system"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
irqchip: mips-gic: SYNC after enabling GIC region
MIPS: Remove pt_regs adjustments in indirect syscall handler
MIPS: seccomp: Fix indirect syscall args
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Expand the space for uncompressing as the LZ4 worst case does not fit
into the currently reserved space
- Validate boot parameters more strictly to prevent out of bound access
in the decompressor/boot code
- Fix off by one errors in get_segment_base()
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Prevent faulty bootparams.screeninfo from causing harm
x86/boot: Provide more slack space during decompression
x86/ldt: Fix off by one in get_segment_base()
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a thinko in the raw timekeeper update which causes
clock MONOTONIC_RAW to run with erratically increased frequency"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix ktime_get_raw() incorrect base accumulation
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs version warning fix from Steve French:
"As requested, additional kernel warning messages to clarify the
default dialect changes"
[ There is still some discussion about exactly which version should be
the new default. Longer-term we have auto-negotiation coming, but
that's not there yet.. - Linus ]
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Fix warning messages when mounting to older servers
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A couple of late-arriving fixes before final 4.13:
- A few reverts of DT bindings on Allwinner for their ethernet
driver. Discussion didn't converge, and since bindings are
considered ABI it makes sense to revert instead of having to
support two bindings long-term.
- A fix to enumerate GPIOs properly on Marvell Armada AP806"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The ismt driver had a problem with a rarely used transaction type and
the designware driver was made even more robust against non standard
ACPI tables"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Round down ACPI provided clk to nearest supported clk
i2c: ismt: Return EMSGSIZE for block reads with bogus length
i2c: ismt: Don't duplicate the receive length for block reads
epoll: fix race between ep_poll_callback(POLLFREE) and ep_free()/ep_remove()
The race was introduced by me in commit 971316f0503a ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead"). I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().
Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.
TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.
Hopefully this explains use-after-free reported by syzcaller:
BUG: KASAN: use-after-free in debug_spin_lock_before
...
_raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148
this is spin_lock(eventpoll->lock),
...
Freed by task 17774:
...
kfree+0xe8/0x2c0 mm/slub.c:3883
ep_free+0x22c/0x2a0 fs/eventpoll.c:865
Fixes: 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead") Reported-by: 范龙飞 <long7573@126.com> Cc: stable@vger.kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
Borkmann.
2) IPSEC ESP error paths leak memory, from Steffen Klassert.
3) We need an RCU grace period before freeing fib6_node objects, from
Wei Wang.
4) Must check skb_put_padto() return value in HSR driver, from FLorian
Fainelli.
5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
Jeffery.
6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
Dumazet.
7) Use after free when tcf_chain_destroy() called multiple times, from
Jiri Pirko.
8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.
9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
From Stefano Brivio.
10) L2TP tunnel refcount fixes from Guillaume Nault.
11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
Kauperman.
12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
phy_stop_machine(), it causes regressions for multiple people. From
Florian Fainelli.
13) When packets are sent out of br0 we have to clear the
offload_fwdq_mark value.
14) Several NULL pointer deref fixes in packet schedulers when their
->init() routine fails. From Nikolay Aleksandrov.
15) Aquantium devices cannot checksum offload correctly when the packet
is <= 60 bytes. From Pavel Belous.
16) Fix vnet header access past end of buffer in AF_PACKET, from
Benjamin Poirier.
17) Double free in probe error paths of nfp driver, from Dan Carpenter.
18) QOS capability not checked properly in DCB init paths of mlx5
driver, from Huy Nguyen.
19) Fix conflicts between firmware load failure and health_care timer in
mlx5, also from Huy Nguyen.
20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
from Eran Ben ELisha.
21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
from Michael Chan.
22) Missing MSIX vector free in bnxt_en, also from Michael Chan.
23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
Colitti.
24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.
25) bpf_setsockopts() erroneously always returns -EINVAL even on
success. Fix from Yuchung Cheng.
26) tipc_rcv() needs to linearize the SKB before parsing the inner
headers, from Parthasarathy Bhuvaragan.
27) Fix deadlock between link status updates and link removal in netvsc
driver, from Stephen Hemminger.
28) Missed locking of page fragment handling in ESP output, from Steffen
Klassert.
29) Fix refcnt leak in ebpf congestion control code, from Sabrina
Dubroca.
30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
from Christophe Jaillet.
31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
early demux, from Paolo Abeni.
32) Several info leaks in xfrm_user layer, from Mathias Krause.
33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.
34) Properly propagate obsolete state of route upwards in ipv6 so that
upper holders like xfrm can see it. From Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
udp: fix secpath leak
bridge: switchdev: Clear forward mark when transmitting packet
mlxsw: spectrum: Forbid linking to devices that have uppers
wl1251: add a missing spin_lock_init()
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
kcm: do not attach PF_KCM sockets to avoid deadlock
sch_tbf: fix two null pointer dereferences on init failure
sch_sfq: fix null pointer dereference on init failure
sch_netem: avoid null pointer deref on init failure
sch_fq_codel: avoid double free on init failure
sch_cbq: fix null pointer dereferences on init failure
sch_hfsc: fix null pointer deref and double free on init failure
sch_hhf: fix null pointer dereference on init failure
sch_multiq: fix double free on init failure
sch_htb: fix crash on init failure
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a couple drivers fixes (Synaptics PS/2, Xpad)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix PowerA init quirk for some gamepad models
Input: synaptics - fix device info appearing different on reconnect
Merge tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Three regression fixes that should be addressed before the final
release: a missing mutex call in OSS PCM emulation ioctl, ASoC rt5670
headset detection breakage, and a regression in simple-card parser
code"
* tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: simple_card_utils: fix fallback when "label" property isn't present
ALSA: pcm: Fix power lock unbalance via OSS emulation
ASoC: rt5670: Fix GPIO headset detection regression
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three more bug fixes for v4.13.
The two memory management related fixes are quite new, they fix kernel
crashes that can be triggered by user space.
The third commit fixes a bug in the vfio ccw translation code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: fix BUG_ON in crst_table_upgrade
s390/mm: fork vs. 5 level page tabel
vfio: ccw: fix bad ptr math for TIC cda translation
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Regression in chacha20 handling of chunked input
- Crash in algif_skcipher when used with async io
- Potential bogus pointer dereference in lib/mpi"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_skcipher - only call put_page on referenced and used pages
crypto: testmgr - add chunked test cases for chacha20
crypto: chacha20 - fix handling of chunked input
lib/mpi: kunmap after finishing accessing buffer
After commit dce4551cb2ad ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.
We must clear the head state on skb reception, if secpath is
present.
Fixes: dce4551cb2ad ("udp: preserve head state for IP_CMSG_PASSSEC") Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: switchdev: Clear forward mark when transmitting packet
Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.
In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.
However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.
This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.
Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Yotam Gigi <yotamg@mellanox.com> Tested-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum: Forbid linking to devices that have uppers
The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.
Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.
One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.
Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.
Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Nogah Frankel <nogahf@mellanox.com> Tested-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Steve French [Fri, 1 Sep 2017 02:34:24 +0000 (21:34 -0500)]
Fix warning messages when mounting to older servers
When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>