Shiju Jose [Fri, 7 Dec 2018 21:08:08 +0000 (21:08 +0000)]
net: hns3: handle hw errors of PPP PF
This patch handles PF hw errors of PPP(Programmable Packet Processor).
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:07 +0000 (21:08 +0000)]
net: hns3: add handling of hw errors of MAC
This patch adds enable and handling of hw errors of
the MAC block.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Fri, 7 Dec 2018 21:08:06 +0000 (21:08 +0000)]
net: hns3: add handling of hw errors reported through MSIX
This patch adds handling for HNS3 hardware errors(non-standard)
which are reported through MSIX interrupts and not through
PCIe AER channel.
These MSIX reported hardware errors are handled using common
misc. interrupt handler. Hardware error related registers
cannot be cleared in context to the interrupt received as
they require *heavy* access to hardware using IMP(Integrated
Mangement Processor) commands. Hence, we defer the clearing
of such error events till later time.
Since, we have defered exact identification of errors we
will have to defer the level of receovery/reset which
might be required. Hence, a new reset type UNKNOWN reset
has been introduced which effectively defers the assertion
of the reset till we get hold of kind of errors at later
time.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:05 +0000 (21:08 +0000)]
net: hns3: deleted logging 1 bit errors
This patch deletes logging 1 bit errors for the following reasons.
1. AER does not notify 1 bit errors to the device drivers.
However AER reports 1 bit errors to the userspace through the
trace_aer_event for logging in the rasdaemon.
2. Firmware clears the status of 1 bit errors in the hw registers.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:04 +0000 (21:08 +0000)]
net: hns3: add handling of hw ras errors using new set of commands
1. This patch adds handling of hw ras errors using new set of
common commands.
2. Updated the error message tables to match the register's name and
error status returned by the commands.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:03 +0000 (21:08 +0000)]
net: hns3: add optimization in the hclge_hw_error_set_state
1. This patch adds minor loop optimization in the
hclge_hw_error_set_state function.
2. Adds logging module's name if it fails to configure the
error interrupts.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:02 +0000 (21:08 +0000)]
net: hns3: rename process_hw_error function
This patch renames process_hw_error function to
handle_hw_ras_error function to match the purpose
of the function. This is because hw errors reported through
ras and msix interrupts will be handled separately.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:01 +0000 (21:08 +0000)]
net: hns3: deletes unnecessary settings of the descriptor data
This patch deletes unnecessary setting of the descriptor data
to 0 for disabling error interrupts because
it is already done by the hclge_cmd_setup_basic_desc function.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:08:00 +0000 (21:08 +0000)]
net: hns3: re-enable error interrupts on hw reset
This patch adds calling hclge_hw_error_set_state function
to re-enable the error interrupts those will be disabled on
the hw reset.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch
- renames the enable error interrupt functions.
The reason is that these functions
are used for both enable and disable error interrupts.
- removes redundant logs from the enable error interrupt functions.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shiju Jose [Fri, 7 Dec 2018 21:07:58 +0000 (21:07 +0000)]
net: hns3: remove existing process error functions and reorder hw_blk table
1.The command interface for queryng and clearing hw errors is
changed, which requires the new process error functions to be added.
This patch removes all the current process error functions and
associated definitions. The new functions to handle ras errors
would be added in this patch set.
2. Fixed order issue of the hw_blk table.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mlxsw: Un/offload FDB on NVE detach/attach
Petr says:
When a VXLAN device is attached to a bridge of a driver capable of
offloading such, or upped, the FDB entries already present at the device
need to be offloaded. Similarly when an offloaded VXLAN device ceases
being interesting (it is downed, or detached, or a front-panel port
netdevice is detached from the bridge that the VXLAN device is attached
to), any offloaded FDB entries need to be unoffloaded and unmarked. This
attach / detach processing is implemented in this patchset.
In patch #1, a code pattern is extracted into a named function for
easier reuse.
In patch #2, vxlan_fdb_replay() is added to send
SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE for each FDB entry with a given VNI.
The intention is that the offloading driver will interpret these events
like any other and thus offload the FDB entries that existed prior to
VXLAN attach.
In patches #3 and #4, the functions vxlan_fdb_clear_offload() resp.
br_fdb_clear_offload() are added. These clear the offloaded flag at
matching FDB entries.
In patches #5-#9, we introduce FID-type-specific and NVE-type-specific
ops necessary to properly abstract invocations of the replay/clear
functions.
Finally patch #10 implements the FDB management.
In patch #11, the mlxsw-specific test case is extended to check that the
management of offload marks under the newly-supported situations is
correct. Patch #12, from Ido, exercises the new code paths in actual
functional test.
v2:
- Patch #1:
- Modify vxlan_fdb_switchdev_notifier_info() to initialize the
structure through a passed-in pointer argument, instead of returning
it as a value.
- Patch #2:
- Adapt to API change in vxlan_fdb_switchdev_notifier_info()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 7 Dec 2018 19:55:20 +0000 (19:55 +0000)]
selftests: forwarding: Add PVID test case for VXLAN with VLAN-aware bridges
When using VLAN-aware bridges with VXLAN, the VLAN that is mapped to the
VNI of the VXLAN device is that which is configured as "pvid untagged"
on the corresponding bridge port.
When these flags are toggled or when the VLAN is deleted entirely,
remote hosts should not be able to receive packets from the VTEP.
Add a test case for above mentioned scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:18 +0000 (19:55 +0000)]
selftests: mlxsw: vxlan: Test FDB un/marking on VXLAN join/leave
When a VXLAN device is attached to an offloaded bridge, or when a
front-panel port is attached to a bridge that already has a VXLAN
device, mlxsw should offload the existing offloadable FDB entries.
Similarly when VXLAN device is downed, the FDB entries are unoffloaded,
and the marks thus need to be cleared. Similarly when a front-panel port
device is attached to a bridge with a VXLAN device, or when VLAN flags
are tweaked on a VXLAN port attached to a VLAN-aware bridge.
Test that the replaying / clearing logic works by observing transitions
in presence of offload marks under different scenarios.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:17 +0000 (19:55 +0000)]
mlxsw: spectrum_nve: Un/offload FDB on nve_fid_disable/enable
Any existing NVE FDB entries need to be offloaded when NVE is enabled
for a given FID. Recent patches have added fdb_replay op for this, so
just invoke it from mlxsw_sp_nve_fid_enable().
When NVE is disabled on a FID, any existing FDB offloaded marks need to
be cleared on NVE device as well as on its bridge master. An op to
handle this, fdb_clear_offload, has been added to FID ops and NVE ops in
previous patches. Add code to resolve the NVE device, NVE type, and
dispatch to both fdb_clear_offload ops.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If there are any offloaded FDB entries at bridge master of an NVE device
at the time that it's un-offloaded, their offloaded marks need to be
cleared. How that is done depends on whether the bridge in question is
vlan aware. Therefore add a per-FID-type operation.
Implement the operation for the 802.1q and 802.1d bridges.
Add and publish a function mlxsw_sp_fid_fdb_clear_offload() to dispatch
to the new operation according to FID type.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If there are any offloaded FDB entries at an NVE device at the time that
it's un-offloaded, their offloaded marks need to be cleared. How that is
done depends on NVE device type, and therefore add a per-NVE-type
operation.
Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
A replay of FDB needs to be performed so that the FDB entries existing
at the NVE device are offloaded. How the replay is done depends on NVE
device type, and therefore add a per-NVE-type operation.
Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The notifier block will need to be passed to vxlan_fdb_replay() in a
follow-up patch.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:09 +0000 (19:55 +0000)]
mlxsw: spectrum: Track NVE type at FIDs
A follow-up patch will add support for replay and for clearing of
offload marks. These are NVE type-sensitive operations, and to be able
to dispatch them properly, a FID needs to know what NVE type is attached
to it.
Therefore, track the NVE type at struct mlxsw_sp_fid. Extend
mlxsw_sp_fid_vni_set() to take it as an argument, and add
mlxsw_sp_fid_nve_type().
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:07 +0000 (19:55 +0000)]
bridge: Add br_fdb_clear_offload()
When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that unsets the
offload flag on FDB entries on a given bridge port and VLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:06 +0000 (19:55 +0000)]
vxlan: Add vxlan_fdb_clear_offload()
When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that walks the
FDB table, unsetting the offload flag on RDST with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:04 +0000 (19:55 +0000)]
vxlan: Add vxlan_fdb_replay()
When a VXLAN device becomes relevant to a driver (such as when it is
attached to an offloaded bridge), the driver will generally need to walk
the existing FDB entries and offload them.
Add a function vxlan_fdb_replay() to call a given notifier block for
each FDB entry with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 7 Dec 2018 19:55:03 +0000 (19:55 +0000)]
vxlan: Add a function to init switchdev_notifier_vxlan_fdb_info
There are currently two places that need to initialize the notifier info
structure, and one more is coming next when vxlan_fdb_replay() is
introduced. These three instances have / will have very similar code
that is easy to abstract away into a named function.
Add such function, vxlan_fdb_switchdev_notifier_info(), and call it from
vxlan_fdb_switchdev_call_notifiers() and vxlan_fdb_find_uc().
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 7 Dec 2018 14:00:22 +0000 (14:00 +0000)]
net: aquantia: add support of RSS configuration
Add support of configuration of RSS hash key and RSS indirection table.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 7 Dec 2018 14:00:17 +0000 (14:00 +0000)]
net: aquantia: fix initialization of RSS table
Now RSS indirection table is initialized before setting up the number of
hw queues, consequently the table may be filled by non existing queues.
This patch moves the initialization when the number of hw queues is
known.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 7 Dec 2018 14:00:15 +0000 (14:00 +0000)]
net: aquantia: increase max number of hw queues
Increase the upper limit of the hw queues up to 8.
This makes RSS better on multiheaded cpus.
This is a maximum AQC hardware supports in one traffic class.
The actual value is still limited by a number of available cpu cores.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 7 Dec 2018 14:00:11 +0000 (14:00 +0000)]
net: aquantia: fix RSS table and key sizes
Set RSS indirection table and RSS hash key sizes to their real size.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Dec 2018 21:26:07 +0000 (13:26 -0800)]
Merge branch 'Pass-extack-to-NETDEV_PRE_UP'
Petr Machata says:
====================
Pass extack to NETDEV_PRE_UP
Drivers may need to validate configuration of a device that's about to
be upped. An example is mlxsw, which needs to check the configuration of
a VXLAN device attached to an offloaded bridge. Should the validation
fail, there's currently no way to communicate details of the failure to
the user, beyond an error number.
Therefore this patch set extends the NETDEV_PRE_UP event to include
extack, if available.
There are three vectors through which NETDEV_PRE_UP invocation can be
reached. The two major ones are dev_open() and dev_change_flags(), the
last is then __dev_change_flags().
In patch #1, the first access vector, dev_open() is addressed. An extack
parameter is added and all users converted to use it.
Before addressing the second vector, two preparatory patches propagate
extack argument to the proximity of the dev_change_flags() call in VRF
and IPVLAN drivers. That happens in patches #2 and #3. Then in patch #4,
dev_change_flags() is treated similarly to dev_open().
Likewise in patch #5, __dev_change_flags() is extended.
Then in patches #6 and #7, the extack is finally propagated all the way
to the point where the notification is emitted.
This change allows particularly mlxsw (which already has code to
leverage extack if available) to communicate to the user error messages
regarding VXLAN configuration. In patch #8, add a test case that
exercises this code and checks that an error message is propagated.
For example:
local 192.0.2.17 remote 192.0.2.18 \
dstport 4789 nolearning noudpcsum tos inherit ttl 100
local 192.0.2.17 remote 192.0.2.18 \
dstport 4789 nolearning noudpcsum tos inherit ttl 100
Error: mlxsw_spectrum: Conflicting NVE tunnels configuration.
v2:
- Add David Ahern's tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:48 +0000 (17:05 +0000)]
selftests: mlxsw: Add a new test extack.sh
Add a testsuite dedicated to testing extack propagation and related
functionality.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:47 +0000 (17:05 +0000)]
net: core: dev: Attach extack to NETDEV_PRE_UP
Drivers may need to validate configuration of a device that's about to
be upped. Should the validation fail, there's currently no way to
communicate details of the failure to the user, beyond an error number.
To mend that, change __dev_open() to take an extack argument and pass it
from __dev_change_flags() and dev_open(), where it was propagated in the
previous patches.
Change __dev_open() to call call_netdevice_notifiers_extack() so that
the passed-in extack is attached to the NETDEV_PRE_UP notifier.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In order to propagate extack through NETDEV_PRE_UP, add a new function
call_netdevice_notifiers_extack() that primes the extack field of the
notifier info. Convert call_netdevice_notifiers() to a simple wrapper
around the new function that passes NULL for extack.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:43 +0000 (17:05 +0000)]
net: core: dev: Add extack argument to __dev_change_flags()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. The last missing API is __dev_change_flags().
Therefore extend __dev_change_flags() with and extra extack argument and
update the two existing users.
Since the function declaration line is changed anyway, name the struct
net_device argument to placate checkpatch.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:42 +0000 (17:05 +0000)]
net: core: dev: Add extack argument to dev_change_flags()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().
Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.
Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:40 +0000 (17:05 +0000)]
net: ipvlan: ipvlan_set_port_mode(): Add an extack argument
A follow-up patch will extend dev_change_flags() with an extack
argument. Extend ipvlan_set_port_mode() to have that argument available
for the conversion.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:38 +0000 (17:05 +0000)]
net: vrf: cycle_netdev(): Add an extack argument
A follow-up patch will extend dev_change_flags() with an extack
argument. Extend cycle_netdev() to have that argument available for the
conversion.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 6 Dec 2018 17:05:36 +0000 (17:05 +0000)]
net: core: dev: Add extack argument to dev_open()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().
Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.
Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Dec 2018 20:18:17 +0000 (12:18 -0800)]
Merge branch 'dsa-mtu'
Andrew Lunn says:
====================
Adjust MTU of DSA master interface
DSA makes use of additional headers to direct a frame in/out of a
specific port of the switch. When the slave interfaces uses an MTU of
1500, the master interface can be asked to handle frames with an MTU
of 1504, or 1508 bytes. Some Ethernet interfaces won't
transmit/receive frames which are bigger than their MTU.
Automate the increasing of the MTU on the master interface, by adding
to each tagging driver how much overhead they need, and then calling
dev_set_mtu() of the master interface to increase its MTU as needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 6 Dec 2018 10:36:05 +0000 (11:36 +0100)]
net: dsa: Set the master device's MTU to account for DSA overheads
DSA tagging of frames sent over the master interface to the switch
increases the size of the frame. Such frames can then be bigger than
the normal MTU of the master interface, and it may drop them. Use the
overhead information from the tagger to set the MTU of the master
device to include this overhead.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 6 Dec 2018 10:36:04 +0000 (11:36 +0100)]
net: dsa: Add overhead to tag protocol ops.
Each DSA tag protocol needs to add additional headers to the Ethernet
frame in order to direct it towards a specific switch egress port. It
must also remove the head from a frame received from a
switch. Indicate the maximum size of these headers in the tag protocol
ops structure, so the core can take these overheads into account.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Li RongQing [Thu, 6 Dec 2018 08:08:17 +0000 (16:08 +0800)]
tun: align write-heavy flow entry members to a cache line
tun flow entry 'updated' fields are written when receive
every packet. Thus if a flow is receiving packets from a
particular flow entry, it'll cause false-sharing with
all the other who has looked it up, so move it in its own
cache line
and update 'queue_index' and 'update' field only when
they are changed to reduce the cache false-sharing.
Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Wang Li <wangli39@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Thu, 6 Dec 2018 02:00:09 +0000 (09:00 +0700)]
tipc: fix node keep alive interval calculation
When setting LINK tolerance, node timer interval will be calculated
base on the LINK with lowest tolerance.
But when calculated, the old node timer interval only updated if current
setting value (tolerance/4) less than old ones regardless of number of
links as well as links' lowest tolerance value.
This caused to two cases missing if tolerance changed as following:
Case 1:
1.1/ There is one link (L1) available in the system
1.2/ Set L1's tolerance from 1500ms => lower (i.e 500ms)
1.3/ Then, fallback to default (1500ms) or higher (i.e 2000ms)
Expected:
node timer interval is 1500/4=375ms after 1.3
Result:
node timer interval will not being updated after changing tolerance at 1.3
since its value 1500/4=375ms is not less than 500/4=125ms at 1.2.
Case 2:
2.1/ There are two links (L1, L2) available in the system
2.2/ L1 and L2 tolerance value are 2000ms as initial
2.3/ Set L2's tolerance from 2000ms => lower 1500ms
2.4/ Disable link L2 (bring down its bearer)
Expected:
node timer interval is 2000ms/4=500ms after 2.4
Result:
node timer interval will not being updated after disabling L2 since
its value 2000ms/4=500ms is still not less than 1500/4=375ms at 2.3
although L2 is already not available in the system.
To fix this, we start the node interval calculation by initializing it to
a value larger than any conceivable calculated value. This way, the link
with the lowest tolerance will always determine the calculated value.
Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring [Wed, 5 Dec 2018 19:50:32 +0000 (13:50 -0600)]
net: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which all of these are.
Cc: "David S. Miller" <davem@davemloft.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: netdev@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Oskolkov [Tue, 4 Dec 2018 19:55:56 +0000 (11:55 -0800)]
net: netem: use a list in addition to rbtree
When testing high-bandwidth TCP streams with large windows,
high latency, and low jitter, netem consumes a lot of CPU cycles
doing rbtree rebalancing.
This patch uses a linear list/queue in addition to the rbtree:
if an incoming packet is past the tail of the linear queue, it is
added there, otherwise it is inserted into the rbtree.
Without this patch, perf shows netem_enqueue, netem_dequeue,
and rb_* functions among the top offenders. With this patch,
only netem_enqueue is noticeable if jitter is low/absent.
Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Peter Oskolkov <posk@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: bridge: convert multicast to generic rhashtable
The current bridge multicast code uses a custom rhashtable
implementation which predates the generic rhashtable API. Patch 01
converts it to use the generic kernel rhashtable which simplifies the
code a lot and removes duplicated functionality. The convert also makes
hash_elasticity obsolete as the generic rhashtable already has such
checks and has a fixed elasticity of RHT_ELASTICITY (16 currently) so we
emit a warning whenever elasticity is set and return RHT_ELASTICITY when
read (patch 03). Patch 02 converts the multicast code to use non-bh RCU
flavor as it was mixing bh and non-bh. Since now we have the generic
rhashtable which autoshrinks we can be more liberal with the default
hash maximum so patch 04 increases it to 4096 and moves it to a define in
br_private.h.
v3: add non-rcu br_mdb_get variant and use it where we have
multicast_lock, drop special hash_max handling and just set it where
needed and use non-bh RCU consistently (patch 02, new)
v2: send the latest version of the set which handles when IGMP snooping
is not defined, changes are in patch 01
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: bridge: increase multicast's default maximum number of entries
bridge's default hash_max was 512 which is rather conservative, now that
we're using the generic rhashtable API which autoshrinks let's increase
it to 4096 and move it to a define in br_private.h.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the bridge multicast uses the generic rhashtable interface we
can drop the hash_elasticity option as that is already done for us and
it's hardcoded to a maximum of RHT_ELASTICITY (16 currently). Add a
warning about the obsolete option when the hash_elasticity is set.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge multicast code has been using a mix of RCU and RCU-bh flavors
sometimes in questionable way. Since we've moved to rhashtable just use
non-bh RCU everywhere. In addition this simplifies freeing of objects
and allows us to remove some unnecessary callback functions.
v3: new patch
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bridge: convert multicast to generic rhashtable
The bridge multicast code currently uses a custom resizable hashtable
which predates the generic rhashtable interface. It has many
shortcomings compared and duplicates functionality that is presently
available via the generic rhashtable, so this patch removes the custom
rhashtable implementation in favor of the kernel's generic rhashtable.
The hash maximum is kept and the rhashtable's size is used to do a loose
check if it's reached in which case we revert to the old behaviour and
disable further bridge multicast processing. Also now we can support any
hash maximum, doesn't need to be a power of 2.
v3: add non-rcu br_mdb_get variant and use it where multicast_lock is
held to avoid RCU splat, drop hash_max function and just set it
directly
v2: handle when IGMP snooping is undefined, add br_mdb_init/uninit
placeholders
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Dec 2018 00:48:44 +0000 (16:48 -0800)]
Merge tag 'mlx5e-updates-2018-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-12-04
This series includes updates to mlx5e netdevice driver
From Saeed, Remove trailing space of tx_pause ethtool stat
From Gal, Cleanup unused defines
From Aya, ethtool Support for configuring of RX hash fields
From Tariq, Improve ethtool private-flags code structure
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Dec 2018 00:26:16 +0000 (16:26 -0800)]
Merge branch 'u32-to-linkmode-fixes'
Andrew Lunn says:
====================
u32 to linkmode fixes
This patchset fixes issues found in the last patchset which converted
the phydev advertise etc, from a u32 to a linux bitmap. Most of the
issues are the result of clearing bits which should not of been
cleared. To make the API clearer, the idea from Heiner Kallweit was
used, with _mod_ to indicate the function modifies just the bits it
needs to, or _to_ to clear all bits and just set bit that need to be
set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 5 Dec 2018 20:49:45 +0000 (21:49 +0100)]
net: phy: Fix ioctl handler when modifing MII_ADVERTISE
When the MII_ADVERTISE register is modified by the IOCTL handler,
phydev->advertising needs recalculating. Use the _mod_ variant of
mii_adv_to_linkmode_adv_t so that bits outside of the advertise
registers are not cleared.
Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 5 Dec 2018 20:49:43 +0000 (21:49 +0100)]
net: mii: Add mii_lpa_mod_linkmode_lpa_t
Add a _mod_ variant of mii_lpa_to_linkmode_lpa_t. Use this to fix the
genphy_read_status() where the 1G link partner features are getting
lost.
Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 5 Dec 2018 20:49:42 +0000 (21:49 +0100)]
phy: marvell: Rename mii_lpa_to_linkmode_lpa_t
Rename mii_lpa_to_linkmode_lpa_t to mii_lpa_mod_linkmode_lpa_t to
indicate it modifies the passed linkmode bitmap, without clearing any
other bits.
Also, ensure bit are clear which the lpa indicates should not be set.
Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 5 Dec 2018 20:49:41 +0000 (21:49 +0100)]
net: mii: Rename mii_stat1000_to_linkmode_lpa_t
Rename mii_stat1000_to_linkmode_lpa_t to
mii_stat1000_mod_linkmode_lpa_t to indicate it modifies the passed
linkmode bitmap, without clearing any other bits.
Add a helper to set/clear bits in a linkmode.
Use this helper to ensure bit are clear which the stat1000 indicates
should not be set.
Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 5 Dec 2018 20:49:40 +0000 (21:49 +0100)]
net: mii: Fix autoneg in mii_lpa_to_linkmode_lpa_t()
mii_adv_to_linkmode_adv_t() clears all bits before setting it needs to
set. This means the freshly set Autoneg gets cleared.
Change the order, and add comments about it clearing the old content
of the bitmap.
Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Tue, 23 Oct 2018 13:03:33 +0000 (16:03 +0300)]
net/mlx5e: ethtool, Support user configuration for RX hash fields
Enable user configuration of RX hash fields that are used for traffic
spreading into RX queues. User can change built-in RSS (Receive Side
Scaling) profiles on the following traffic types: UDP4, UDP6, TCP4 and
TCP6. This configuration effects both outer and inner headers. Added
support for ethtool commands: ETHTOOL_SRXFH and ETHTOOL_GRXFH.
Command example respectively:
$ethtool -N eth1 rx-flow-hash tcp4 sdfn
$ethtool -n eth1 rx-flow-hash tcpp4
IP SA
IP DA
L4 bytes 0 & 1 [TCP/UDP src port]
L4 bytes 2 & 3 [TCP/UDP dst port]
Aya Levin [Tue, 6 Nov 2018 19:05:29 +0000 (21:05 +0200)]
net/mlx5e: Move RSS params to a dedicated struct
Remove RSS params from params struct under channels, and introduce
a new struct with RSS configuration params under priv struct. There is
no functional change here.
Aya Levin [Sun, 28 Oct 2018 14:22:57 +0000 (16:22 +0200)]
net/mlx5e: Refactor TIR configuration function
Refactor mlx5e_build_indir_tir_ctx_hash for better code re-use. TIR
stands for Transport Interface Receive, which is responsible for all
transport related operations on the receive side. Added a
static array with TIR default configuration values. This separates
configuration values from command setting, which is needed for
downstream patch.
Jakub Kicinski [Tue, 4 Dec 2018 01:43:28 +0000 (17:43 -0800)]
net: documentation: build a directory structure for drivers
Documentation/networking/ is full of cryptically named files with
driver documentation. This makes finding interesting information
at a glance really hard. Move all those files into a directory
called device_drivers (since not all drivers are for device) and
fix up references.
RFC v0.1 -> RFC v1:
- also add .txt suffix to the files which are missing it (Quentin)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Henrik Austad <henrik@austad.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 4 Dec 2018 15:58:17 +0000 (07:58 -0800)]
tcp: reduce POLLOUT events caused by TCP_NOTSENT_LOWAT
TCP_NOTSENT_LOWAT socket option or sysctl was added in linux-3.12
as a step to enable bigger tcp sndbuf limits.
It works reasonably well, but the following happens :
Once the limit is reached, TCP stack generates
an [E]POLLOUT event for every incoming ACK packet.
This causes a high number of context switches.
This patch implements the strategy David Miller added
in sock_def_write_space() :
- If TCP socket has a notsent_lowat constraint of X bytes,
allow sendmsg() to fill up to X bytes, but send [E]POLLOUT
only if number of notsent bytes is below X/2
This considerably reduces TCP_NOTSENT_LOWAT overhead,
while allowing to keep the pipe full.
Tested:
100 ms RTT netem testbed between A and B, 100 concurrent TCP_STREAM
A:/# grep TCP /proc/net/sockstat
TCP: inuse 203 orphan 0 tw 19 alloc 414 mem 86411 # 3.5 MB per flow
A:/# vmstat 5 5 # check that context switches have not inflated too much.
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
2 0 0 260386512 13592 662148 0 0 10 0 17 14 0 1 99 0 0
0 0 0 260519680 13592 604184 0 0 512 13 726843 12424 0 10 90 0 0
1 1 0 260435424 13592 598360 0 0 512 25 764645 12925 0 10 90 0 0
1 0 0 260855392 13592 578380 0 0 512 7 722943 13624 0 11 88 0 0
1 0 0 260445008 13592 601176 0 0 614 34 772288 14317 0 10 90 0 0
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Adi Nissim [Sun, 2 Dec 2018 12:55:21 +0000 (14:55 +0200)]
net/sched: act_tunnel_key: Don't dump dst port if it wasn't set
It's possible to set a tunnel without a destination port. However,
on dump(), a zero dst port is returned to user space even if it was not
set, fix that.
Note that so far it wasn't required, b/c key less tunnels were not
supported and the UDP tunnels do require destination port.
Signed-off-by: Adi Nissim <adin@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Adi Nissim [Sun, 2 Dec 2018 12:55:20 +0000 (14:55 +0200)]
net/sched: act_tunnel_key: Allow key-less tunnels
Allow setting a tunnel without a tunnel key. This is required for
tunneling protocols, such as GRE, that define the key as an optional
field.
Signed-off-by: Adi Nissim <adin@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Tue, 23 Oct 2018 07:02:08 +0000 (10:02 +0300)]
net/mlx5e: Move modify tirs hash functionality
Move modify tirs hash functionality (mlx5e_modify_tirs_hash) from
en_ethtool.c to en_main.c. This allows future use of this fuctionality
from en_fs_ethtool.c, while keeping current convention: en_ethtool.c
doesn't have an API. There is no functional change here.
David S. Miller [Tue, 4 Dec 2018 16:36:37 +0000 (08:36 -0800)]
Merge branch 'mlxsw-Add-one-armed-router-support'
Ido Schimmel says:
====================
mlxsw: Add one-armed router support
Up until now, when a packet was routed by the ASIC through the same
router interface (RIF) from which it ingressed from, the ASIC passed the
sole copy of the packet to the kernel. This allowed the kernel to route
the packet and also potentially generate an ICMP redirect.
There are scenarios (e.g., "one-armed router") where packets are
intentionally routed this way and are therefore not deemed as
exceptions. In such scenarios the current method of trapping packets to
the CPU is problematic, as it results in major packet loss.
This patchset solves the problem by having the ASIC forward the packet,
but also send a copy to the CPU, which gives the kernel the opportunity
to generate required exceptions.
To prevent the kernel from forwarding such packets again, the driver
marks them with 'offload_l3_fwd_mark', which causes the kernel to
consume them in ip{,6}_forward_finish().
Patch #1 renames 'offload_mr_fwd_mark' to 'offload_l3_fwd_mark'. When
set, the field indicates that a packet was already forwarded in L3
(unicast / multicast) by a capable device.
Patch #2 teaches the kernel to consume unicast packets that have
'offload_l3_fwd_mark' set.
Patch #3 changes mlxsw to mirror loopbacked (iRIF == eRIF) packets,
instead of trapping them.
Patch #4 adds a test case for above mentioned scenario.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 4 Dec 2018 08:15:14 +0000 (08:15 +0000)]
selftests: mlxsw: Add one-armed router test
Construct a "one-armed router" topology and test that packets are
forwarded by the ASIC and that a copy of the packet is sent to the
kernel, which does not forward the packet again.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 4 Dec 2018 08:15:12 +0000 (08:15 +0000)]
mlxsw: spectrum: Mirror loopbacked packets instead of trapping them
When the ASIC detects that a unicast packet is routed through the same
router interface (RIF) from which it ingressed (iRIF == eRIF), it raises
a trap called loopback error (LBERROR).
Thus far, this trap was configured to send a sole copy of the packet to
the CPU so that ICMP redirect packets could be potentially generated by
the kernel.
This is problematic as the CPU cannot forward packets at 3.2Tb/s and
there are scenarios (e.g., "one-armed router") where iRIF == eRIF is not
an exception.
Solve this by changing the trap to send a copy of the packet to the CPU.
To prevent the kernel from forwarding the packet again, it is marked
with 'offload_l3_fwd_mark'.
The trap is configured in a trap group of its own with a dedicated
policer in order not to prevent packets trapped by other traps from
reaching the CPU.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 4 Dec 2018 08:15:11 +0000 (08:15 +0000)]
net: Do not route unicast IP packets twice
Packets marked with 'offload_l3_fwd_mark' were already forwarded by a
capable device and should not be forwarded again by the kernel.
Therefore, have the kernel consume them.
The check is performed in ip{,6}_forward_finish() in order to allow the
kernel to process such packets in ip{,6}_forward() and generate required
exceptions. For example, ICMP redirects.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 4 Dec 2018 08:15:10 +0000 (08:15 +0000)]
skbuff: Rename 'offload_mr_fwd_mark' to 'offload_l3_fwd_mark'
Commit abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field") added
the 'offload_mr_fwd_mark' field to indicate that a packet has already
undergone L3 multicast routing by a capable device. The field is used to
prevent the kernel from forwarding a packet through a netdev through
which the device has already forwarded the packet.
Currently, no unicast packet is routed by both the device and the
kernel, but this is about to change by subsequent patches and we need to
be able to mark such packets, so that they will no be forwarded twice.
Instead of adding yet another field to 'struct sk_buff', we can just
rename 'offload_mr_fwd_mark' to 'offload_l3_fwd_mark', as a packet
either has a multicast or a unicast destination IP.
While at it, add a comment about both 'offload_fwd_mark' and
'offload_l3_fwd_mark'.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangtao Li [Mon, 3 Dec 2018 14:26:38 +0000 (09:26 -0500)]
net: qca_spi: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangtao Li [Mon, 3 Dec 2018 14:13:35 +0000 (09:13 -0500)]
nfp: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Erez Alfasi [Sun, 2 Dec 2018 15:40:26 +0000 (17:40 +0200)]
net/mlx4_core: Fix several coding style errors
Fix 3 checkpatch errors within mlx4/main.c:
- Unnecessary mlx4_debug_level global variable initialization to 0.
- Prohibited space before comma.
- Whitespaces instead of tab.
Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Erez Alfasi [Sun, 2 Dec 2018 15:40:25 +0000 (17:40 +0200)]
net/mlx4_core: Fix return codes of unsupported operations
Functions __set_port_type and mlx4_check_port_params returned
-EINVAL while the proper return code is -EOPNOTSUPP as a
result of an unsupported operation. All drivers should generate
this and all users should check for it when detecting an
unsupported functionality.
Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Sun, 2 Dec 2018 15:33:14 +0000 (16:33 +0100)]
net: phy: Also request modules for C45 IDs
Logic of phy_device_create() requests PHY modules according to PHY ID
but for C45 PHYs we use different field for the IDs.
Let's also request the modules for these IDs.
Changes from v1:
- Only request C22 modules if C45 are not present (Andrew)
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Joao Pinto <joao.pinto@synopsys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Dec 2018 00:23:09 +0000 (16:23 -0800)]
Merge branch 'octeontx2-next'
Jerin Jacob says:
====================
octeontx2-af: NIX and NPC enhancements
This patchset is a continuation to earlier submitted four patch
series to add a new driver for Marvell's OcteonTX2 SOC's
Resource virtualization unit (RVU) admin function driver.
1. octeontx2-af: Add RVU Admin Function driver
https://www.spinics.net/lists/netdev/msg528272.html
2. octeontx2-af: NPA and NIX blocks initialization
https://www.spinics.net/lists/netdev/msg529163.html
3. octeontx2-af: NPC parser and NIX blocks initialization
https://www.spinics.net/lists/netdev/msg530252.html
4. octeontx2-af: NPC MCAM support and FLR handling
https://www.spinics.net/lists/netdev/msg534392.html
This patch series adds support for below
NPC block:
- Add NPC(mkex) profile support for various Key extraction configurations
NIX block:
- Enable dynamic RSS flow key algorithm configuration
- Enhancements on Rx checksum and error checks
- Add support for Tx packet marking support
- TL1 schedule queue allocation enhancements
- Add LSO format configuration mbox
- VLAN TPID configuration
- Skip multicast entry init for broadcast tables
v2:
- Rename FLOW_* to NIX_FLOW_* to avoid serious global namespace collisions,
as we have various FLOW_* definitions coming from
include/uapi/linux/pkt_cls.h for example.(David Miller)
- Pack the arguments of rvu_get_tl1_schqs() function
as 80 columns allows.(David Miller)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vamsi Attunuru [Sun, 2 Dec 2018 12:47:49 +0000 (18:17 +0530)]
octeontx2-af: Enable mkex profile
The following set of NPC registers allow the driver to configure NPC
to generate different key value schemes to compare against packet
payload in MCAM search.
Currently, the AF driver populates these registers to
configure the default values to address the most common
use cases such as key generation for channel number + DMAC.
The secure firmware stores different configuration
value of these registers to enable different NPC use case
along with the name for the lookup.
Patch loads profile binary from secure firmware over
the exiting CGX mailbox interface and apply the profile.
AF driver shall fall back to the default configuration
in case of any errors.
The AF consumer driver can know the selected profile
on response to NPC_GET_KEX_CFG mailbox by introducing
mkex_pfl_name in the struct npc_get_kex_cfg_rsp.
Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: Add LSO format configuration mailbox
NIX_AF_LSO_FORMAT(0..31)_FIELD(0..7) register enables an SW defined
means to define LSO packet modification formats.
0..31 works as an index to choose the algorithm, On success, the mailbox
returns the index to the client of chosen LSO algorithm selection.
This index will be used in configuring the transmit descriptors.
Add mailbox interface to dynamically reserve and configure LSO format.
This commit also fixes 'sizem1' for NIX_LSOALG_TCP_FLAGS
to '1' i.e 2 Bytes.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Setup TPID's for vlan0 and vlan1 for Tx VLAN insertion offloads.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kanas [Sun, 2 Dec 2018 12:47:45 +0000 (18:17 +0530)]
octeontx2-af: Add support for Tx packet marking
NIX_AF_MARK_FORMAT(0..127)_CTL register enables an SW defined
means to mark/insert various data in the packet based on
final packet color from traffic shaping HW.
0..127 works as an index to choose the algorithm. On success,
the mailbox returns the index to the client.
Add NIX_MARK_FORMAT_CFG mailbox which reserves mark format based on
tuple (offset, y_mask, y_val, r_mask, r_val)
If the tuple is requested again for mark format that was already
reserved, then it will be reused. If not it will reserve a new entry
if space is available.
Also on AF init commonly used marker format such as VLAN DEI, IPv4
ECN, IPv4 DSCP are reserved for AF consumers.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vamsi Attunuru [Sun, 2 Dec 2018 12:47:44 +0000 (18:17 +0530)]
octeontx2-af: Enable RSS with promiscuous mode
This patch adds support for enabling RSS in promiscuous mode
if RSS is already requested by the AF client.
Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jerin Jacob [Sun, 2 Dec 2018 12:47:42 +0000 (18:17 +0530)]
octeontx2-af: Enable inner IPv4 checksum and its error code
This patch enables the inner IPv4 checksum and
defines the error code for Rx inner and outer checksum errors.
Setting ERRCODE as 1 so that CQE descriptor can be embedded
valid checksum error code and the driver can interpret
checksum error as ERRLEV = LID + 1 and ERRCODE = 1.
Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: Allow freeing single TLx Tx schedule queue
The default behavior was to free all the TLx Tx schedule
queues. This patch adds support for freeing a single Tx
schedule queue if TXSCHQ_FREE_ALL flag is not set.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: Restrict TL1 allocation and configuration
TL1 is the root node in the scheduling hierarchy and
it is a global resource with a limited number.
This patch introduces restriction and validation on
the allocation of the TL1 nodes for the effective resource
sharing across the AF consumers.
- Limit TL1 allocation to 2 per lmac.
One could be for the normal link and one for IEEE802.3br
express link (Express Send DMA).
Effectively all the VF's of an RVU PF(lmac) share the two TL1 schqs.
- TL1 cannot be freed once allocated.
- Allow VF's to only apply default config to TL1 if not
already applied. PF's can always overwrite the TL1 config.
- Consider NIX_AQ_INSTOP_WRITE while validating txschq
when sq.ena is set.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jerin Jacob [Sun, 2 Dec 2018 12:47:39 +0000 (18:17 +0530)]
octeontx2-af: Add support for runtime RSS algo index reservation
Introduced reserve_flowkey_alg_idx()to reserve RSS algorithm index,
it would internally use set_flowkey_fields() to generate fields
based on the flow key dynamically.
On AF driver init, it would reserve a predefined set RSS algo indexes,
which will be available all the time for all the AF driver consumers.
The leftover algo indexes can be reserved at runtime through
exiting nix_rss_flowkey_cfg mailbox message.
The NIX_FLOW_KEY_TYPE_PORT is removed from predefined a set of RSS flow
type as it is not used by any consumer.
Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jerin Jacob [Sun, 2 Dec 2018 12:47:38 +0000 (18:17 +0530)]
octeontx2-af: Add support for dynamic flow cfg to RSS field generation
Introduce state-based algorithm to convert the flow_key value
to RSS algo field used by NIX_AF_RX_FLOW_KEY_ALGX_FIELDX register.
The outer `for loop` goes over _all_ protocol field and the following
variables depict the state machine forward progress logic.
a) keyoff_marker - Enabled when hash byte length needs to be accounted
in field->key_offset update.
b) field_marker - Enabled when a new field needs to be selected.
c) group_member - Enabled when a protocol is part of a group.
This would remove the existing hard coding and enable to add
new protocol support seamlessly.
Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-jammy-kernel.git / log