]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
15 years agoUSB: image/mdc800, fix lock imbalance
Jiri Slaby [Wed, 11 Mar 2009 20:47:37 +0000 (21:47 +0100)]
USB: image/mdc800, fix lock imbalance

There is an omitted unlock in mdc800_usb_probe's fail path. Add it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Henning Zabel <henning@uni-paderborn.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: atm/cxacru, fix lock imbalance
Jiri Slaby [Wed, 11 Mar 2009 20:47:36 +0000 (21:47 +0100)]
USB: atm/cxacru, fix lock imbalance

We do not hold mutex in one place in cxacru_cm, but unlock it on fail path.
Fix this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Simon Arlott <cxacru@fire.lp0.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: unusual_devs: Add support for GI 0431 SD-Card interface
Jan Dumon [Tue, 10 Mar 2009 16:29:47 +0000 (17:29 +0100)]
USB: unusual_devs: Add support for GI 0431 SD-Card interface

Enable the SD-Card interface on the GI 0431 HSUPA stick from Option.

The unusual_devs.h entry is necessary because the device descriptor is
vendor-specific. That prevents usb-storage from binding to it as an
interface driver.

T:  Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=0af0 ProdID=7501 Rev= 0.00
S:  Manufacturer=Option N.V.
S:  Product=Globetrotter HSUPA Modem
C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Jan Dumon <j.dumon@option.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: new cp2101 device id
Robert M. Kenney [Thu, 26 Feb 2009 19:58:39 +0000 (14:58 -0500)]
USB: serial: new cp2101 device id

From: Robert M. Kenney <rmk@unh.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0
Michael Hennerich [Fri, 6 Mar 2009 22:07:43 +0000 (14:07 -0800)]
USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: add FTDI USB/Serial converter devices
Axel Wachtler [Thu, 5 Mar 2009 22:09:22 +0000 (14:09 -0800)]
USB: serial: add FTDI USB/Serial converter devices

Add the following devices to the USB FTDI SIO device table:

 Bus 001 Device 009: ID 03eb:2109 Atmel Corp.
 http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187

 Bus 001 Device 008: ID 1cf1:0001
 http://www.dresden-elektronik.de/shop/prod75.html

 Bus 001 Device 007: ID 1c1f:0004
 http://www.dresden-elektronik.de/shop/prod64.html

Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: usbfs: keep async URBs until the device file is closed
Alan Stern [Mon, 9 Mar 2009 17:44:02 +0000 (13:44 -0400)]
USB: usbfs: keep async URBs until the device file is closed

The usbfs driver manages a list of completed asynchronous URBs.  But
it is too eager to free the entries on this list: destroy_async() gets
called whenever an interface is unbound or a device is removed, and it
deallocates the outstanding struct async entries for all URBs on that
interface or device.  This is wrong; the user program should be able
to reap an URB any time after it has completed, regardless of whether
or not the interface is still bound or the device is still present.

This patch (as1222) moves the code for deallocating the completed list
entries from destroy_async() to usbdev_release().  The outstanding
entries won't be freed until the user program has closed the device
file, thereby eliminating any possibility that the remaining URBs
might still be reaped.

This fixes a bug in which a program can hang in the USBDEVFS_REAPURB
ioctl when the device is unplugged.

Reported-and-tested-by: Martin Poupe <martin.poupe@upek.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: usbtmc: add protocol 1 support
Greg Kroah-Hartman [Wed, 11 Mar 2009 20:51:42 +0000 (13:51 -0700)]
USB: usbtmc: add protocol 1 support

The driver already supports the 1 protocol support, so just add it to
the MODULE_DEVICE_TABLE entry so it properly picks up these devices.

Thanks to Jouni Rynö for pointing this out.

Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: usbtmc: fix stupid bug in open()
Greg Kroah-Hartman [Wed, 11 Mar 2009 03:42:55 +0000 (20:42 -0700)]
USB: usbtmc: fix stupid bug in open()

open() will never succeed, as we always return -ENODEV.  Fix this
obvious bug.

Thanks to Jouni Ryno for reporting it.

Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoAvoid 64-bit "switch()" statements on 32-bit architectures
Linus Torvalds [Tue, 17 Mar 2009 17:02:35 +0000 (10:02 -0700)]
Avoid 64-bit "switch()" statements on 32-bit architectures

Commit ee6f779b9e0851e2f7da292a9f58e0095edf615a ("filp->f_pos not
correctly updated in proc_task_readdir") changed the proc code to use
filp->f_pos directly, rather than through a temporary variable.  In the
process, that caused the operations to be done on the full 64 bits, even
though the offset is never that big.

That's all fine and dandy per se, but for some unfathomable reason gcc
generates absolutely horrid code when using 64-bit values in switch()
statements.  To the point of actually calling out to gcc helper
functions like __cmpdi2 rather than just doing the trivial comparisons
directly the way gcc does for normal compares.  At which point we get
link failures, because we really don't want to support that kind of
crazy code.

Fix this by just casting the f_pos value to "unsigned long", which
is plenty big enough for /proc, and avoids the gcc code generation issue.

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoprevent boosting kprobes on exception address
Masami Hiramatsu [Mon, 16 Mar 2009 22:57:22 +0000 (18:57 -0400)]
prevent boosting kprobes on exception address

Don't boost at the addresses which are listed on exception tables,
because major page fault will occur on those addresses.  In that case,
kprobes can not ensure that when instruction buffer can be freed since
some processes will sleep on the buffer.

kprobes-ia64 already has same check.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Tue, 17 Mar 2009 15:59:33 +0000 (08:59 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: wait for endio to complete before destruction
  dm crypt: fix kcryptd_async_done parameter
  dm io: respect BIO_MAX_PAGES limit
  dm table: rework reference counting fix
  dm ioctl: validate name length when renaming

15 years agoFast TSC calibration: calculate proper frequency error bounds
Linus Torvalds [Tue, 17 Mar 2009 15:13:17 +0000 (08:13 -0700)]
Fast TSC calibration: calculate proper frequency error bounds

In order for ntpd to correctly synchronize the clocks, the frequency of
the system clock must not be off by more than 500 ppm (or, put another
way, 1:2000), or ntpd will end up giving up on trying to synchronize
properly, and ends up reseting the clock in jumps instead.

The fast TSC PIT calibration sometimes failed this test - it was
assuming that the PIT reads always took about one microsecond each (2us
for the two reads to get a 16-bit timer), and that calibrating TSC to
the PIT over 15ms should thus be sufficient to get much closer than
500ppm (max 2us error on both sides giving 4us over 15ms: a 270 ppm
error value).

However, that assumption does not always hold: apparently some hardware
is either very much slower at reading the PIT registers, or there was
other noise causing at least one machine to get 700+ ppm errors.

So instead of using a fixed 15ms timing loop, this changes the fast PIT
calibration to read the TSC delta over the individual PIT timer reads,
and use the result to calculate the error bars on the PIT read timing
properly.  We then successfully calibrate the TSC only if the maximum
error bars fall below 500ppm.

In the process, we also relax the timing to allow up to 25ms for the
calibration, although it can happen much faster depending on hardware.

Reported-and-tested-by: Jesper Krogh <jesper@krogh.cc>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix potential fast PIT TSC calibration startup glitch
Linus Torvalds [Tue, 17 Mar 2009 14:58:26 +0000 (07:58 -0700)]
Fix potential fast PIT TSC calibration startup glitch

During bootup, when we reprogram the PIT (programmable interval timer)
to start counting down from 0xffff in order to use it for the fast TSC
calibration, we should also make sure to delay a bit afterwards to allow
the PIT hardware to actually start counting with the new value.

That will happens at the next CLK pulse (1.193182 MHz), so the easiest
way to do that is to just wait at least one microsecond after
programming the new PIT counter value.  We do that by just reading the
counter value back once - which will take about 2us on PC hardware.

Reported-and-tested-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 16 Mar 2009 19:49:12 +0000 (12:49 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  acpi-wmi: unsigned cannot be less than 0
  thinkpad-acpi: fix module autoloading for older models
  acer-wmi: Unmark as 'experimental'
  acpi-wmi: Unmark as 'experimental'
  acer-wmi: double free in acer_rfkill_exit()
  platform/x86: depends instead of select for laptop platform drivers
  asus-laptop: use select instead of depends on
  eeepc-laptop: restore acpi_generate_proc_event()
  asus-laptop: restore acpi_generate_proc_event()
  acpi: check for pxm_to_node_map overflow
  ACPI: remove doubled status checking
  ACPI suspend: Blacklist Toshiba Satellite L300 that requires to set SCI_EN directly on resume
  Revert "ACPI: make some IO ports off-limits to AML"
  suspend: switch the Asus Pundit P1-AH2 to old ACPI sleep ordering

15 years agodm crypt: wait for endio to complete before destruction
Milan Broz [Mon, 16 Mar 2009 17:44:36 +0000 (17:44 +0000)]
dm crypt: wait for endio to complete before destruction

The following oops has been reported when dm-crypt runs over a loop device.

...
[   70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000)
...
[   70.381058] Call Trace:
[   70.381058]  [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt]
[   70.381058]  [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt]
[   70.381058]  [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod]
[   70.381058]  [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod]
[   70.381058]  [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<c02bad86>] ? loop_thread+0x380/0x3b7
[   70.381058]  [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165
[   70.381058]  [<c013754f>] ? autoremove_wake_function+0x0/0x33
[   70.381058]  [<c02baa06>] ? loop_thread+0x0/0x3b7

When a table is being replaced, it waits for I/O to complete
before destroying the mempool, but the endio function doesn't
call mempool_free() until after completing the bio.

Fix it by swapping the order of those two operations.

The same problem occurs in dm.c with md referenced after dec_pending.
Again, we swap the order.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agodm crypt: fix kcryptd_async_done parameter
Huang Ying [Mon, 16 Mar 2009 17:44:33 +0000 (17:44 +0000)]
dm crypt: fix kcryptd_async_done parameter

In the async encryption-complete function (kcryptd_async_done), the
crypto_async_request passed in may be different from the one passed to
crypto_ablkcipher_encrypt/decrypt.  Only crypto_async_request->data is
guaranteed to be same as the one passed in.  The current
kcryptd_async_done uses the passed-in crypto_async_request directly
which may cause the AES-NI-based AES algorithm implementation to panic.

This patch fixes this bug by only using crypto_async_request->data,
which points to dm_crypt_request, the crypto_async_request passed in.
The original data (convert_context) is gotten from dm_crypt_request.

[mbroz@redhat.com: reworked]
Cc: stable@kernel.org
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agodm io: respect BIO_MAX_PAGES limit
Mikulas Patocka [Mon, 16 Mar 2009 17:44:30 +0000 (17:44 +0000)]
dm io: respect BIO_MAX_PAGES limit

dm-io calls bio_get_nr_vecs to get the maximum number of pages to use
for a given device.  It allocates one additional bio_vec to use
internally but failed to respect BIO_MAX_PAGES, so fix this.

This was the likely cause of:
  https://bugzilla.redhat.com/show_bug.cgi?id=173153

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agodm table: rework reference counting fix
Mikulas Patocka [Mon, 16 Mar 2009 17:44:26 +0000 (17:44 +0000)]
dm table: rework reference counting fix

Fix an error introduced in dm-table-rework-reference-counting.patch.

When there is failure after table initialization, we need to use
dm_table_destroy, not dm_table_put, to free the table.

dm_table_put may be used only after dm_table_get.

Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agodm ioctl: validate name length when renaming
Milan Broz [Mon, 16 Mar 2009 16:56:01 +0000 (16:56 +0000)]
dm ioctl: validate name length when renaming

When renaming a mapped device validate the length of the new name.

The rename ioctl accepted any correctly-terminated string enclosed
within the data passed from userspace.  The other ioctls enforce a
size limit of DM_NAME_LEN.  If the name is changed and becomes longer
than that, the device can no longer be addressed by name.

Fix it by properly checking for device name length (including
terminating zero).

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 16 Mar 2009 14:56:58 +0000 (07:56 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"
  r8169: use hardware auto-padding.
  igb: remove ASPM L0s workaround
  netxen: remove old flash check.
  mv643xx_eth: fix unicast address filter corruption on mtu change
  xfrm: Fix xfrm_state_find() wrt. wildcard source address.
  emac: Fix clock control for 405EX and 405EXr chips
  ixgbe: fix multiple unicast address support
  via-velocity: Fix DMA mapping length errors on transmit.
  qlge: bugfix: Pad outbound frames smaller than 60 bytes.
  qlge: bugfix: Move netif_napi_del() to common call point.
  qlge: bugfix: Tell hw to strip vlan header.
  qlge: bugfix: Increase filter on inbound csum.
  dnet: replace obsolete *netif_rx_* functions with *napi_*
  net: Add be2net driver.
  dnet: Fix warnings on 64-bit.
  dnet: Dave DNET ethernet controller driver (updated)
  ipv6:  Fix BUG when disabled ipv6 module is unloaded
  bnx2x: Using DMAE to initialize the chip
  bnx2x: Casting page alignment
  ...

15 years agolinux.conf.au 2009: Tuz
Rusty Russell [Sun, 15 Mar 2009 22:35:07 +0000 (09:05 +1030)]
linux.conf.au 2009: Tuz

Impact: help prevent extinction of species

The Tasmanian Devil is a shy iconic Australian creature named for its
spine-chilling screech.  It is threatened with extinction due to a
scientifically interesting but horrific transmissible facial cancer.

This one is standing in for Tux for one release using the far less-known
Devil Facial Tux Disguise.

Save The Tasmanian Devil http://tassiedevil.com.au

Signed-off-by: Linux.conf.au Hobart Team <contact@marchsouth.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofilp->f_pos not correctly updated in proc_task_readdir
Zhang Le [Mon, 16 Mar 2009 06:44:31 +0000 (14:44 +0800)]
filp->f_pos not correctly updated in proc_task_readdir

filp->f_pos only get updated at the end of the function. Thus d_off of those
dirents who are in the middle will be 0, and this will cause a problem in
glibc's readdir implementation, specifically endless loop. Because when overflow
occurs, f_pos will be set to next dirent to read, however it will be 0, unless
the next one is the last one. So it will start over again and again.

There is a sample program in man 2 gendents. This is the output of the program
running on a multithread program's task dir before this patch is applied:

  $ ./a.out /proc/3807/task
  --------------- nread=128 ---------------
  i-node#  file type  d_reclen  d_off   d_name
    506442  directory    16          1  .
    506441  directory    16          0  ..
    506443  directory    16          0  3807
    506444  directory    16          0  3809
    506445  directory    16          0  3812
    506446  directory    16          0  3861
    506447  directory    16          0  3862
    506448  directory    16          8  3863

This is the output after this patch is applied

  $ ./a.out /proc/3807/task
  --------------- nread=128 ---------------
  i-node#  file type  d_reclen  d_off   d_name
    506442  directory    16          1  .
    506441  directory    16          2  ..
    506443  directory    16          3  3807
    506444  directory    16          4  3809
    506445  directory    16          5  3812
    506446  directory    16          6  3861
    506447  directory    16          7  3862
    506448  directory    16          8  3863

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branches 'misc-up-now' and 'platform-drivers' into release
Len Brown [Mon, 16 Mar 2009 04:38:52 +0000 (00:38 -0400)]
Merge branches 'misc-up-now' and 'platform-drivers' into release

15 years agoacpi-wmi: unsigned cannot be less than 0
Roel Kluin [Wed, 4 Mar 2009 19:55:30 +0000 (11:55 -0800)]
acpi-wmi: unsigned cannot be less than 0

include/linux/pci-acpi.h:74:

typedef u32                 acpi_status;

result is unsigned, so an error returned by acpi_bus_register_driver()
will not be noticed.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agothinkpad-acpi: fix module autoloading for older models
Mathieu Chouquet-Stringer [Sat, 14 Mar 2009 15:35:26 +0000 (16:35 +0100)]
thinkpad-acpi: fix module autoloading for older models

Looking at the source, there seems to be a missing * to match my DMI
string.  I mean for newer IBM and Lenovo's laptops you match either one
of the following:
MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");

While for older Thinkpads, you do this (for instance):
IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");

with IBM_BIOS_MODULE_ALIAS being MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")

Note there's no * terminating the string.  As result, udev doesn't load
anything because modprobe cannot find anything matching this (my
machine actually):

udevtest: run: '/sbin/modprobe dmi:bvnIBM:bvr1IET71WW(2.10):bd06/16/2006:svnIBM:pn236621U:pvrNotAv

Signed-off-by: Mathieu Chouquet-Stringer <mchouque@free.fr>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoacer-wmi: Unmark as 'experimental'
Carlos Corbacho [Sat, 14 Feb 2009 09:53:59 +0000 (09:53 +0000)]
acer-wmi: Unmark as 'experimental'

This driver has been around and used long enough that we can drop the
'experimental'.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoacpi-wmi: Unmark as 'experimental'
Carlos Corbacho [Sat, 14 Feb 2009 09:53:53 +0000 (09:53 +0000)]
acpi-wmi: Unmark as 'experimental'

ACPI-WMI isn't experimental anymore, and there are other drivers that now
depend on it that aren't either.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoacer-wmi: double free in acer_rfkill_exit()
Dan Carpenter [Sat, 14 Feb 2009 09:53:48 +0000 (09:53 +0000)]
acer-wmi: double free in acer_rfkill_exit()

This is acer_rfkill_exit() from drivers/platform/x86/acer-wmi.c.

The code frees wireless_rfkill->data again instead of
bluetooth_rfkill->data.

This was found using a code checker (http://repo.or.cz/w/smatch.git/).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoplatform/x86: depends instead of select for laptop platform drivers
Corentin Chary [Wed, 25 Feb 2009 08:37:09 +0000 (09:37 +0100)]
platform/x86: depends instead of select for laptop platform drivers

"I hate `select' and will gleefully leap on any s/select/depends/ patch,
whether it works or not :)"
  Andrew Morton

select INPUT is not needed here, because if someone doesn't want INPUT,
he won't want these drivers either.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoasus-laptop: use select instead of depends on
Corentin Chary [Sun, 15 Feb 2009 18:30:21 +0000 (19:30 +0100)]
asus-laptop: use select instead of depends on

Like thinkpad_acpi or eeepc-laptop, asus-laptop will
now use "select" instead of "depends on"
for LEDS_CLASS, NEW_LEDS and BACKLIGHT_CLASS_DEVICE

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: restore acpi_generate_proc_event()
Corentin Chary [Sun, 15 Feb 2009 18:30:20 +0000 (19:30 +0100)]
eeepc-laptop: restore acpi_generate_proc_event()

Restore acpi_generate_proc_event() for backward
compatibility with old acpi scripts.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoasus-laptop: restore acpi_generate_proc_event()
Corentin Chary [Sun, 15 Feb 2009 18:30:19 +0000 (19:30 +0100)]
asus-laptop: restore acpi_generate_proc_event()

Restore acpi_generate_proc_event() for backward
compatibility with old acpi scripts.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoacpi: check for pxm_to_node_map overflow
Cyrill Gorcunov [Wed, 4 Mar 2009 19:55:29 +0000 (11:55 -0800)]
acpi: check for pxm_to_node_map overflow

It is hardly (if ever) possible but in case of broken _PXM entry we could
reach out of pxm_to_node_map array bounds in acpi_map_pxm_to_node() call.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoACPI: remove doubled status checking
Jiri Slaby [Wed, 4 Mar 2009 19:55:27 +0000 (11:55 -0800)]
ACPI: remove doubled status checking

There was a misplaced status test (two consequent tests without a
statement in between) in acpi_bus_init for ages.  Remove it, since the
function which should be checked (acpi_os_initialize1) has BUG_ONs on
failure paths.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoACPI suspend: Blacklist Toshiba Satellite L300 that requires to set SCI_EN directly...
Zhang Rui [Mon, 16 Mar 2009 02:13:44 +0000 (22:13 -0400)]
ACPI suspend: Blacklist Toshiba Satellite L300 that requires to set SCI_EN directly on resume

This is a supplement of commit 65df78473ffbf3bff5e2034df1638acc4f3ddd50.
http://bugzilla.kernel.org/show_bug.cgi?id=12798

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoRevert "ACPI: make some IO ports off-limits to AML"
Len Brown [Wed, 25 Feb 2009 23:00:18 +0000 (18:00 -0500)]
Revert "ACPI: make some IO ports off-limits to AML"

This reverts commit 5ec5d38a1c8af255ffc481c81eef13e9155524b3.
because it caused spurious dmesg warmings.
We'll implement the check for off-limit ports
in a more clever way in the future.

http://bugzilla.kernel.org/show_bug.cgi?id=12758

Signed-off-by: Len Brown <len.brown@intel.com>
15 years agosuspend: switch the Asus Pundit P1-AH2 to old ACPI sleep ordering
Andy Whitcroft [Wed, 11 Feb 2009 18:11:22 +0000 (18:11 +0000)]
suspend: switch the Asus Pundit P1-AH2 to old ACPI sleep ordering

Switch the Asus Pundit P1-AH2 (M2N8L motherboard) to the old ACPI 1.0
sleep ordering by default.  Without this it will not suspend/resume
correctly.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agor8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"
françois romieu [Sun, 15 Mar 2009 01:10:50 +0000 (01:10 +0000)]
r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"

It fails on the following systems:
- RTL8169sc/8110sc (XID 18000000)
  reported by Tim Durack <tdurack@gmail.com> (x86)
- RTL8169sb/8110sb (XID 10000000)
  reported by Mikael Pettersson <mikpe@it.uu.se> (ARM)

The patch appeared to work on x86 for the following systems:
RTL8169sb/8110sb 10000000 PCI   (EXT)
RTL8110s         04000000 PCI   (EXT)
RTL8102e         24a00000 PCI-E (LOM)
RTL8168c/8111c   3c2000c0 PCI-E (LOM)
RTL8168b/8111b   38000000 PCI-E (LOM)
RTL8168b/8111b   38000000 PCI-E (EXT)

The patch exposes two problems:
1) while not completely wrong, mac addresses are not read correctly
   from the EEPROM
2) the MAC address registers are not correctly set

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agor8169: use hardware auto-padding.
françois romieu [Sun, 15 Mar 2009 01:09:54 +0000 (01:09 +0000)]
r8169: use hardware auto-padding.

It shortens the code and fixes the current pci_unmap leak with
padded skb reported by Dave Jones.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoparisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=y
Kyle McMartin [Sat, 14 Mar 2009 23:40:59 +0000 (19:40 -0400)]
parisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=y

CC      drivers/parisc/sba_iommu.o
drivers/parisc/sba_iommu.c:1373: error: expected identifier or '('
before '}' token
make[2]: *** [drivers/parisc/sba_iommu.o] Error 1
make[1]: *** [drivers/parisc] Error 2
make: *** [drivers] Error 2

Don't know how this has gone missed for so long... clearly I need
to do builds on my C8000 more often.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 15 Mar 2009 20:34:56 +0000 (13:34 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  [ARM] Fix virtual to physical translation macro corner cases
  [ARM] update mach-types
  [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions
  MX1 fix include
  [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info
  [ARM] 5418/1: restore lr before leaving mcount
  ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz
  ARM: OMAP: Allow I2C bus driver to be compiled as a module
  ARM: OMAP: sched_clock() corrected
  ARM: OMAP: Fix compile error if pm.h is included
  [ARM] orion5x: pass dram mbus data to xor driver
  [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c
  [ARM] S3C64XX: Fix USB host clock mux list
  [ARM] S3C64XX: Fix name of USB host clock.
  [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH
  [ARM] S3C64XX: Do gpiolib configuration earlier
  [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint()
  [ARM] SMDK6410: Declare iodesc table static
  ...

15 years agoigb: remove ASPM L0s workaround
Alexander Duyck [Sun, 15 Mar 2009 05:26:40 +0000 (22:26 -0700)]
igb: remove ASPM L0s workaround

The L0s workaround should be moved into a pci quirk and so it is not
necessary in the driver.  This update removes the L0s workaround from the
igb driver.

This was the second half of the PCI quirk patch that Matthew Wilcox did
not pick up when he picked up the quirk patch.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sat, 14 Mar 2009 20:43:18 +0000 (13:43 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Fix Xilinx SystemACE driver to handle empty CF slot
  block: fix memory leak in bio_clone()
  block: Add gfp_mask parameter to bio_integrity_clone()

15 years agoFix Xilinx SystemACE driver to handle empty CF slot
Grant Likely [Mon, 9 Mar 2009 12:42:24 +0000 (13:42 +0100)]
Fix Xilinx SystemACE driver to handle empty CF slot

The SystemACE driver does not handle an empty CF slot gracefully. An
empty CF slot ends up hanging the system. This patch adds a check for
the CF state and stops trying to process requests if the slot is empty.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: fix memory leak in bio_clone()
Li Zefan [Mon, 9 Mar 2009 09:42:45 +0000 (10:42 +0100)]
block: fix memory leak in bio_clone()

If bio_integrity_clone() fails, bio_clone() returns NULL without freeing
the newly allocated bio.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: Add gfp_mask parameter to bio_integrity_clone()
un'ichi Nomura [Mon, 9 Mar 2009 09:40:52 +0000 (10:40 +0100)]
block: Add gfp_mask parameter to bio_integrity_clone()

Stricter gfp_mask might be required for clone allocation.
For example, request-based dm may clone bio in interrupt context
so it has to use GFP_ATOMIC.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Sat, 14 Mar 2009 19:02:21 +0000 (12:02 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Mark Eins: Fix configuration.
  MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Sat, 14 Mar 2009 19:01:37 +0000 (12:01 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (31 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k4.
  [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
  [SCSI] qla2xxx: Correct truncation in return-code status checking.
  [SCSI] qla2xxx: Correct vport delete bug.
  [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
  [SCSI] qla2xxx: Correct address range checking for option-rom updates.
  [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20
  [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3)
  [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status
  [SCSI] fcoe: fix kfree(skb)
  [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway
  [SCSI] libfc: do not change the fh_rx_id of a recevied frame
  [SCSI] fcoe: Correct fcoe_transports initialization vs. registration
  [SCSI] fcoe: Use setup_timer() and mod_timer()
  [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper
  [SCSI] libfc, fcoe: Cleanup function formatting and minor typos
  [SCSI] libfc, fcoe: Fix kerneldoc comments
  [SCSI] libfc: Cleanup libfc_function_template comments
  [SCSI] libfc: check for err when recv and state is incorrect
  [SCSI] libfc: rename rp to rdata in fc_disc_new_target()
  ...

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 14 Mar 2009 19:00:42 +0000 (12:00 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_piix: add workaround for Samsung DB-P70
  libata: Keep shadow last_ctl up to date during resets
  sata_mv: fix MSI irq race condition

15 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Sat, 14 Mar 2009 19:00:18 +0000 (12:00 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix the fix to Bugzilla #11061, when IPv6 isn't defined...
  SUNRPC: xprt_connect() don't abort the task if the transport isn't bound
  SUNRPC: Fix an Oops due to socket not set up yet...
  Bug 11061, NFS mounts dropped
  NFS: Handle -ESTALE error in access()
  NLM: Fix GRANT callback address comparison when IPv6 is enabled
  NLM: Shrink the IPv4-only version of nlm_cmp_addr()
  NFSv3: Fix posix ACL code
  NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2)
  SUNRPC: Tighten up the task locking rules in __rpc_execute()

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Sat, 14 Mar 2009 18:59:22 +0000 (11:59 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Use xs->bucket to set xattr value outside
  ocfs2: Fix a bug found by sparse check.
  ocfs2: tweak to get the maximum inline data size with xattr
  ocfs2: reserve xattr block for new directory with inline data

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 14 Mar 2009 18:59:05 +0000 (11:59 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10978): Report tuning algorith correctly
  V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument
  V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod.
  V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative
  V4L/DVB (10974): Use Diseqc 3/3 mode to send data
  V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix
  V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes
  V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a
  V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29
Linus Torvalds [Sat, 14 Mar 2009 18:58:38 +0000 (11:58 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.29:
  parisc: update defconfigs
  parisc: define x->x mmio accessors
  parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()
  parisc: convert cpu_check_affinity to new cpumask api
  parisc: convert (read|write)bwlq to inlines
  parisc: fix use of new cpumask api in irq.c
  parisc: update parisc for new irq_desc
  parisc: update MAINTAINERS
  parisc: fix wrong assumption about bus->self
  parisc: fix 64bit build
  parisc: add braces around arguments in assembler macros
  parisc: fix dev_printk() compile warnings for accessing a device struct
  parisc: remove unused local out_putf label
  parisc: fix `struct pt_regs' declared inside parameter list warning
  parisc: fix section mismatch warnings
  parisc: remove klist iterators
  parisc: BUG_ON() cleanup

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sat, 14 Mar 2009 18:58:10 +0000 (11:58 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: save the returned value of dma_map_sg
  ide-floppy: do not map dataless cmds to an sg

15 years agovmscan: pgmoved should be cleared after updating recent_rotated
Daisuke Nishimura [Fri, 13 Mar 2009 20:52:00 +0000 (13:52 -0700)]
vmscan: pgmoved should be cleared after updating recent_rotated

pgmoved should be cleared after updating recent_rotated.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoeCryptfs: don't encrypt file key with filename key
Tyler Hicks [Fri, 13 Mar 2009 20:51:59 +0000 (13:51 -0700)]
eCryptfs: don't encrypt file key with filename key

eCryptfs has file encryption keys (FEK), file encryption key encryption
keys (FEKEK), and filename encryption keys (FNEK).  The per-file FEK is
encrypted with one or more FEKEKs and stored in the header of the
encrypted file.  I noticed that the FEK is also being encrypted by the
FNEK.  This is a problem if a user wants to use a different FNEK than
their FEKEK, as their file contents will still be accessible with the
FNEK.

This is a minimalistic patch which prevents the FNEKs signatures from
being copied to the inode signatures list.  Ultimately, it keeps the FEK
from being encrypted with a FNEK.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonommu: ramfs: don't leak pages when adding to page cache fails
Johannes Weiner [Fri, 13 Mar 2009 20:51:58 +0000 (13:51 -0700)]
nommu: ramfs: don't leak pages when adding to page cache fails

When a ramfs nommu mapping is expanded, contiguous pages are allocated
and added to the pagecache.  The caller's reference is then passed on
by moving whole pagevecs to the file lru list.

If the page cache adding fails, make sure that the error path also
moves the pagevec contents which might still contain up to PAGEVEC_SIZE
successfully added pages, of which we would leak references otherwise.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Enrik Berkhan <Enrik.Berkhan@ge.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonommu: ramfs: pages allocated to an inode's pagecache may get wrongly discarded
Enrik Berkhan [Fri, 13 Mar 2009 20:51:56 +0000 (13:51 -0700)]
nommu: ramfs: pages allocated to an inode's pagecache may get wrongly discarded

The pages attached to a ramfs inode's pagecache by truncation from nothing
- as done by SYSV SHM for example - may get discarded under memory
pressure.

The problem is that the pages are not marked dirty.  Anything that creates
data in an MMU-based ramfs will cause the pages holding that data will
cause the set_page_dirty() aop to be called.

For the NOMMU-based mmap, set_page_dirty() may be called by write(), but
it won't be called by page-writing faults on writable mmaps, and it isn't
called by ramfs_nommu_expand_for_mapping() when a file is being truncated
from nothing to allocate a contiguous run.

The solution is to mark the pages dirty at the point of allocation by the
truncation code.

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agonetxen: remove old flash check.
Dhananjay Phadke [Fri, 6 Mar 2009 14:52:12 +0000 (14:52 +0000)]
netxen: remove old flash check.

Remove flash size check which made sense only for ancient
boards with 1MB flash. The check is based on values read
from specific locations and fails with firmware size changes.

This prevents driver from getting right mac addresses.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agomv643xx_eth: fix unicast address filter corruption on mtu change
Lennert Buytenhek [Fri, 13 Mar 2009 22:48:02 +0000 (15:48 -0700)]
mv643xx_eth: fix unicast address filter corruption on mtu change

When mv643xx_eth_open() is called to up an interface, port_start()
will first re-program the unicast address filter, and then
re-initialise the PORT_CONFIG register, but that will disable unicast
promiscuous mode if it was enabled by the unicast address filter setup.

This isn't a problem on ifconfig up, as ->set_rx_mode() will be called
shortly afterwards which will program the filters again, but it does
trigger when changing the MTU, which calls mv643xx_eth_stop() and then
mv643xx_eth_open() by hand to repopulate the receive rings with skbuffs
of the new size.

Swap the initialisation of the PORT_START register and the call to
the unicast filter setup function to fix this.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMIPS: Mark Eins: Fix configuration.
Ralf Baechle [Fri, 13 Mar 2009 20:17:57 +0000 (21:17 +0100)]
MIPS: Mark Eins: Fix configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Fix TIF_32BIT undefined problem when seccomp is disabled
Zhang Le [Thu, 12 Mar 2009 10:00:50 +0000 (18:00 +0800)]
MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoxfrm: Fix xfrm_state_find() wrt. wildcard source address.
David S. Miller [Fri, 13 Mar 2009 21:22:40 +0000 (14:22 -0700)]
xfrm: Fix xfrm_state_find() wrt. wildcard source address.

The change to make xfrm_state objects hash on source address
broke the case where such source addresses are wildcarded.

Fix this by doing a two phase lookup, first with fully specified
source address, next using saddr wildcarded.

Reported-by: Nicolas Dichtel <nicolas.dichtel@dev.6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoemac: Fix clock control for 405EX and 405EXr chips
Benjamin Herrenschmidt [Fri, 13 Mar 2009 20:48:46 +0000 (13:48 -0700)]
emac: Fix clock control for 405EX and 405EXr chips

The EMAC variant in the 405EX and 405EXr chips needs the "440EP" type clock
control workaround to avoid lockups of the Rx side during reset.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoixgbe: fix multiple unicast address support
Chris Leech [Tue, 10 Mar 2009 16:00:24 +0000 (16:00 +0000)]
ixgbe: fix multiple unicast address support

Multiple unicast address support appears to have been broken with the
change to support net_device_ops.  This a regression from 2.6.28 to 2.6.29.

I'm not 100% on whether ndo_set_multicast_list can be NULL after this
or not.  If ndo_set_rx_mode is set everything _should_ be using it.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovia-velocity: Fix DMA mapping length errors on transmit.
Dave Jones [Fri, 13 Mar 2009 20:37:46 +0000 (13:37 -0700)]
via-velocity: Fix DMA mapping length errors on transmit.

From: Dave Jones <davej@redhat.com>

The dma-debug changes caught that this driver uses the
wrong DMA mapping length when skb_padto() does something.

With suggestions from Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoide: save the returned value of dma_map_sg
FUJITA Tomonori [Fri, 13 Mar 2009 20:16:13 +0000 (21:16 +0100)]
ide: save the returned value of dma_map_sg

dma_map_sg could return a value different to 'nents' argument of
dma_map_sg so the ide stack needs to save it for the later usage
(e.g. for_each_sg).

The ide stack also needs to save the original sg_nents value for
pci_unmap_sg.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
[bart: backport to Linus' tree]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoide-floppy: do not map dataless cmds to an sg
Borislav Petkov [Fri, 13 Mar 2009 20:16:12 +0000 (21:16 +0100)]
ide-floppy: do not map dataless cmds to an sg

since it fails the virt_to_page() translation check with DEBUG_VIRTUAL
enabled.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: backport to Linus' tree]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoata_piix: add workaround for Samsung DB-P70
Tejun Heo [Tue, 3 Mar 2009 04:52:16 +0000 (13:52 +0900)]
ata_piix: add workaround for Samsung DB-P70

Samsung DB-P70 somehow botched the first ICH9 SATA port.  The board
doesn't expose the first port but somehow SStatus reports link online
while failing SRST protocol leading to repeated probe failures and
thus long boot delay.

Because the BIOS doesn't carry any identifying DMI information, the
port can't be blacklisted safely.  Fortunately, the controller does
have subsystem vendor and ID set.  It's unclear whether the subsystem
IDs are used only for the board but it can be safely worked around by
disabling SIDPR access and just using SRST works around the problem.
Even when the workaround is triggered on an unaffected board the only
side effect will be missing SCR access.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joseph Jang <josephjang@gmail.com>
Reported-by: Jonghyon Sohn <mrsohn@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: Keep shadow last_ctl up to date during resets
Stuart MENEFY [Tue, 10 Mar 2009 11:38:13 +0000 (11:38 +0000)]
libata: Keep shadow last_ctl up to date during resets

libata keeps a shadow copy of the ATA CTL register (which is write only),
and only writes to the hardware when the required value doesn't match
the shadow. However this copy wasn't being maintained when performing
reset functions. This could cause problems for the first operation after
a reset when the correct value might not be written to the CTL register.

This problem was observed when hotplugging a drive: the identify command
was being issued with interrupts enabled, when they should have been
disabled.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agosata_mv: fix MSI irq race condition
Mark Lord [Tue, 10 Mar 2009 20:28:51 +0000 (16:28 -0400)]
sata_mv: fix MSI irq race condition

Fix a (rare) race condition in mv_interrupt() when using MSI.

The value of hpriv->main_irq_mask_addr can change on on the fly,
and without this patch we could end up writing back a stale copy
to the hardware.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agoqlge: bugfix: Pad outbound frames smaller than 60 bytes.
Ron Mercer [Wed, 11 Mar 2009 11:55:43 +0000 (11:55 +0000)]
qlge: bugfix: Pad outbound frames smaller than 60 bytes.

With some asic configurations xmit of frames smaller than 60 bytes may
fail.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: bugfix: Move netif_napi_del() to common call point.
Ron Mercer [Wed, 11 Mar 2009 11:55:42 +0000 (11:55 +0000)]
qlge: bugfix: Move netif_napi_del() to common call point.

Moving netif_napi_del() up the call chain so it will get called from all
exit points.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: bugfix: Tell hw to strip vlan header.
Ron Mercer [Wed, 11 Mar 2009 11:55:41 +0000 (11:55 +0000)]
qlge: bugfix: Tell hw to strip vlan header.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: bugfix: Increase filter on inbound csum.
Ron Mercer [Wed, 11 Mar 2009 11:55:40 +0000 (11:55 +0000)]
qlge: bugfix: Increase filter on inbound csum.

Chip does not do UDP checksum when fragmentation occurs.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodnet: replace obsolete *netif_rx_* functions with *napi_*
Ilya Yanok [Fri, 13 Mar 2009 16:51:46 +0000 (09:51 -0700)]
dnet: replace obsolete *netif_rx_* functions with *napi_*

*netif_rx_* functions is obsolete and removed in newer kernels so
we need to use corresponding *napi_* functions instead.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoV4L/DVB (10978): Report tuning algorith correctly
Matthias Schwarzzot [Tue, 27 Jan 2009 19:29:44 +0000 (16:29 -0300)]
V4L/DVB (10978): Report tuning algorith correctly

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument
Hans Werner [Tue, 27 Jan 2009 19:09:12 +0000 (16:09 -0300)]
V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument

in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I
don't know if this caused real problems anywhere

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first...
Igor M. Liplianin [Sun, 9 Nov 2008 14:35:13 +0000 (11:35 -0300)]
V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod.

For legacy applications stv0899 performs search only first time after insmod
due to not set DVBFE_ALGO_SEARCH_AGAIN bit

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative
Manu Abraham [Tue, 27 Jan 2009 14:03:16 +0000 (11:03 -0300)]
V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative

Code simplification: use in kernel macros

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (10974): Use Diseqc 3/3 mode to send data
Sigmund Augdal [Mon, 26 Jan 2009 22:08:48 +0000 (19:08 -0300)]
V4L/DVB (10974): Use Diseqc 3/3 mode to send data

Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoparisc: update defconfigs
Kyle McMartin [Fri, 13 Mar 2009 05:33:34 +0000 (01:33 -0400)]
parisc: update defconfigs

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: define x->x mmio accessors
Kyle McMartin [Tue, 17 Feb 2009 17:42:52 +0000 (12:42 -0500)]
parisc: define x->x mmio accessors

Bloody inconsiderate driver writers...

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()
Kay Sievers [Mon, 26 Jan 2009 03:53:16 +0000 (03:53 +0000)]
parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: convert cpu_check_affinity to new cpumask api
Kyle McMartin [Mon, 16 Feb 2009 08:20:54 +0000 (03:20 -0500)]
parisc: convert cpu_check_affinity to new cpumask api

cpumask arg to the affinity function is now const, sort
that out through the irq_desc implementations.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: convert (read|write)bwlq to inlines
Kyle McMartin [Mon, 16 Feb 2009 08:05:02 +0000 (03:05 -0500)]
parisc: convert (read|write)bwlq to inlines

Kills the 'value computed but not used' due to
leX_to_cpu.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix use of new cpumask api in irq.c
Kyle McMartin [Mon, 16 Feb 2009 07:53:03 +0000 (02:53 -0500)]
parisc: fix use of new cpumask api in irq.c

cpumask api needs to take a pointer to irq_desc[cpu].affinity

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: update parisc for new irq_desc
Mike Travis [Tue, 13 Jan 2009 03:05:25 +0000 (03:05 +0000)]
parisc: update parisc for new irq_desc

Impact: cleanup, update to new cpumask API

Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's
so access to them should be using the new cpumask API.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: update MAINTAINERS
Grant Grundler [Mon, 1 Dec 2008 07:21:35 +0000 (00:21 -0700)]
parisc: update MAINTAINERS

Signed-off-By: Grant Grundler <grundler@parisc-linux.org>
Reviewed-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix wrong assumption about bus->self
Grant Grundler [Thu, 29 Jan 2009 05:30:55 +0000 (22:30 -0700)]
parisc: fix wrong assumption about bus->self

Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> posted a patch series
to linux-pci to fix a wrong assumption about pci_bus->self==NULL for
all PCI host bus controllers. While PARISC platforms to not behave
this way, I prefer to have the code consistent across architectures.
The following patch replaces pci_bus->self with pci_bus->parent when
used as a test to check for "root bus controller".

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix 64bit build
Helge Deller [Mon, 26 Jan 2009 21:24:38 +0000 (22:24 +0100)]
parisc: fix 64bit build

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: add braces around arguments in assembler macros
Helge Deller [Sun, 18 Jan 2009 17:13:53 +0000 (18:13 +0100)]
parisc: add braces around arguments in assembler macros

Add braces around the macro arguments, else for example
"shl %r1, 5-3, %r2" would not expand to what you would assume.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix dev_printk() compile warnings for accessing a device struct
Helge Deller [Tue, 13 Jan 2009 20:14:51 +0000 (21:14 +0100)]
parisc: fix dev_printk() compile warnings for accessing a device struct

Fix compile warnings:
drivers/scsi/zalon.c: In function `zalon_probe':
drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_driver_string' from incompatible pointer type
drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_name' from incompatible pointer type

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: remove unused local out_putf label
Helge Deller [Tue, 13 Jan 2009 19:54:25 +0000 (20:54 +0100)]
parisc: remove unused local out_putf label

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix `struct pt_regs' declared inside parameter list warning
Helge Deller [Tue, 13 Jan 2009 19:52:46 +0000 (20:52 +0100)]
parisc: fix `struct pt_regs' declared inside parameter list warning

Fix those compile warnings:
uaccess.h:244: warning: `struct pt_regs' declared inside parameter list
uaccess.h:244: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: fix section mismatch warnings
Helge Deller [Tue, 13 Jan 2009 19:51:29 +0000 (20:51 +0100)]
parisc: fix section mismatch warnings

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: remove klist iterators
James Bottomley [Sat, 10 Jan 2009 00:57:06 +0000 (18:57 -0600)]
parisc: remove klist iterators

commit 11c3b5c3e08f4d855cbef52883c266b9ab9df879
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date:   Tue Dec 16 12:24:56 2008 -0800

    driver core: move klist_children into private structure

Broke our parisc build pretty badly because we touch the klists directly
in three cases (AGP, SBA and GSC).  Although GregKH will revert this
patch, there's no reason we should be using the iterators directly, we
can just move to the standard device_for_each_child() API.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoparisc: BUG_ON() cleanup
Helge Deller [Tue, 6 Jan 2009 11:57:01 +0000 (12:57 +0100)]
parisc: BUG_ON() cleanup

- convert a few "if (xx) BUG();" to BUG_ON(xx)
- remove a few printk()s, as we get a backtrace with BUG_ON() anyway

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
15 years agoV4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix
Antti Palosaari [Tue, 10 Mar 2009 16:06:40 +0000 (13:06 -0300)]
V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix

zl10353 i2c-gate was always closed and due to that devices having tuner
behind i2c-gate were broken. Add module configuration which allows disabling
i2c-gate only when really needed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>