The code to optimize the usercopy only checked the ioctl NR field. However,
this code is also called for non-V4L2 ioctls (either private or ioctls from
linux/dvb/audio.h and linux/dvb/video.h for decoder drivers like ivtv).
If such an ioctl has the same NR as a V4L2 ioctl, then disaster strikes.
Modified the code to check on the full command ID.
Thanks to Martin Dauskardt for tracing the ivtv breakage to this particular
change.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (10870a): remove all references for video_decoder.h
changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.
Let's remove it and all references for it in Kernel.
Michael Krufky [Tue, 10 Mar 2009 04:21:14 +0000 (01:21 -0300)]
V4L/DVB (10905): dib0700: enable DVB_FE_CUSTOMISE for dibcom frontends
There was never any build-time dependency of the dib0700 usb module on the
dib0070 tuner module. Now that the build-time dependencies of dib0700 on
dib3000mc, dib7000p and dib7000m have been removed in the previous changesets,
we can enable DVB_FE_CUSTOMISE for these modules under config DVB_USB_DIB0700
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Wed, 4 Mar 2009 22:42:06 +0000 (19:42 -0300)]
V4L/DVB (10876): tda18271: add support for AGC configuration via tuner callback
The tda827x driver supports a feature that the tda18271 driver was lacking
until now. This patch adds support for device-level configuration via the
tuner callback configuration interface.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 2 Mar 2009 02:10:07 +0000 (23:10 -0300)]
V4L/DVB (10856): cx18: Add interlock so sliced VBI insertion only happens for an MPEG PS
The cx18 private packet insertion code only expects to operate on an MPEG PS
when inserting private packets of sliced VBI data. This patch keeps the cx18
driver from corrupting the MPEG TS or other non-PS stream types, in case the
user enables sliced VBI insertion for these MPEG stream types.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 28 Feb 2009 21:48:27 +0000 (18:48 -0300)]
V4L/DVB (10853): cx18: Fix s-parse warnings and a logic error about extracting the VBI PTS
My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans'
builds did. This change explictly declares the pointer into the VBI buffer
header as __be32, which is the correct thing to do as the data is always
big endian when we go to fetch it. Hopefully this will quiet s-parse warnings.
Also corrected a misplaced parenthesis logic error in checking for the VBI
header magic number.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Thu, 5 Mar 2009 11:02:05 +0000 (08:02 -0300)]
V4L/DVB (10848): zoran: Change first argument to zoran_v4l2_buffer_status
It was a struct file *, but all that function wants is the struct zoran_fh
from the file's private data. Since every caller already has this, just
pass the zoran_fh instead.
Randy Dunlap [Mon, 9 Mar 2009 02:01:08 +0000 (23:01 -0300)]
V4L/DVB (10846): dvb/frontends: fix duplicate 'debug' symbol
Fix dvb frontend debug variable to be static, to avoid linker
errors:
drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug'
arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here
ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o
It would also be Good if arch/x86/kernel/entry_32.S didn't have a
non-static 'debug' symbol. OTOH, it helps catch things like this one.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Compro VideoMate uses an external audio DSP chip, controlled via tvaudio
module (tda9874a). This patch improves em28xx infrastructure to support
an external audio processor and fixes the Compro VideoMate entry to work
with it.
dm1105 uses the ir_*() functions, so it needs to select VIDEO_IR
to avoid build errors:
dm1105.c:(.text+0x26b7ac): undefined reference to `ir_input_keydown'
dm1105.c:(.text+0x26b7bc): undefined reference to `ir_input_nokey'
(.devinit.text+0x29982): undefined reference to `ir_codes_dm1105_nec'
(.devinit.text+0x2998a): undefined reference to `ir_input_init'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Bruno Christo [Tue, 3 Mar 2009 01:38:59 +0000 (22:38 -0300)]
V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .
This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.
...
02:00.0 0400: 109e:036e (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdfff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:00.1 0480: 109e:0878 (rev 11)
Subsystem: 800a:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:04.0 0400: 109e:036e (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffd000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:04.1 0480: 109e:0878 (rev 11)
Subsystem: 800b:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffc000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:08.0 0400: 109e:036e (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffb000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:08.1 0480: 109e:0878 (rev 11)
Subsystem: 800c:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdffa000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
02:0c.0 0400: 109e:036e (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdff9000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: bttv
02:0c.1 0480: 109e:0878 (rev 11)
Subsystem: 800d:763d
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at cdff8000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.
After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.
I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.
Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (10822): Add support for Zarlink ZL10036 DVB-S tuner.
This driver is based on initial work by Tino Reichardt and was heavily changed.
The datasheet of the zl10036 can be found here and on other places on the net:
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10820): meye: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from querycap, enum_input, enum_fmt_vid_cap, and
g_fmt_vid_cap.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10819): gspca: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, enum_input, g_parm and gmbuf.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10818): usbvision: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10817): stkwebcam: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_fmt_vid_cap, g_fmt_vid_cap, and g_parm.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10816): cx88: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_input and g_tuner.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10815): bttv: Don't need to zero ioctl parameter fields
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls. For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.
Zeroing code is removed from enum_input and g_tuner.
Trent Piepho [Wed, 4 Mar 2009 04:21:03 +0000 (01:21 -0300)]
V4L/DVB (10814): saa7146: some small fixes
vidioc_enum_fmt_vid_overlay() did nothing but call
vidioc_enum_fmt_vid_cap(), so just make
saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to
vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay().
Have gparm use v4l2_video_std_frame_period to fill in the frame period
instead of just assuming PAL.
Trent Piepho [Wed, 4 Mar 2009 04:21:02 +0000 (01:21 -0300)]
V4L/DVB (10813): v4l2: New function v4l2_video_std_frame_period
Some code was calling v4l2_video_std_construct() when all it cared about
was the frame period. So make a function that just returns that and have
v4l2_video_std_construct() use it.
At this point there are no users of v4l2_video_std_construct() left outside
of v4l2-ioctl, so it could be un-exported and made static.
Change v4l2_video_std_construct() so that it doesn't zero out the struct
v4l2_standard passed in. It's already been zeroed out in the common ioctl
code.
Trent Piepho [Wed, 4 Mar 2009 04:21:02 +0000 (01:21 -0300)]
V4L/DVB (10812): v4l2: Zero out read-only ioctls in one place
If an ioctl is read-only then the driver fills in all the fields. Lots of
times drivers only care about some fields so it's best if video_ioctl2
takes care of zeroing out the entire structure before handing it to the
driver. This saves code in each driver to do it and driver authors often
forget.
The existing memset code in some of the read-only ioctl handlers
can be deleted.
Convert a case statement to a single if statement.
Deleted a debug line from ENUMAUDOUT that was copy-and-pasted to G_AUDOUT
by mistake.
Trent Piepho [Wed, 4 Mar 2009 04:21:02 +0000 (01:21 -0300)]
V4L/DVB (10811): videodev: only copy needed part of RW ioctl's parameter
There are many RW ioctls() in v4l2 where userspace only supplies one or two
of the first fields in the structure passed to the ioctl. The driver then
fills in the rest of the fields.
Instead of copying the entire structure from userspace to the kernel we
only need to copy those fields that userspace is actually supposed to
supply.
What's more, the fields that are meant to be only be output from the driver
can be zeroed out in the videodev code, in case the driver doesn't fill
them all in. Many of the ioctl handlers in v4l2_ioctl do this already, but
my patch does this at one common point and so all the memsets for each
ioctl can be deleted.
For VIDIOC_G_SLICED_VBI_CAP, which has one input field ('type') and other
output-only fields, the input field is near the end of the structure
instead of at the beginning. So there is still a memset in it's ioctl
handler to zero out the beginning of the struct.
There were a couple mistakes with the existing code:
For VIDIOC_G_AUDIO the index field was preserved, but G_AUDIO is a read
only ioctl so nothing is copied from userspace to preserve.
For VIDIOC_G_FREQUENCY the tuner field was not preserved like it should
have been. This would be a problem if there was any hardware with more
than one tuner/modulator.
For VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS, none of the
fields were preserved even though each ioctl has several field that are
supposed to be inputs to the driver! Obviously these ioctls don't get
used much. The index field is needed if the driver has multiple
discrete sizes/rates and other fields can be used too, e.g. if the size
depends on pixel format or frame rate depends on image size for
example.
V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (10800): Add support for ST LNBH24 LNB power controller.
The controller consist of two independent parts.
Every part is similar to LNBP21, but has configurable i2c address.
It is used in NetUP Dual DVB-S2 CI card.
http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Abylay Ospan [Tue, 3 Mar 2009 14:06:00 +0000 (11:06 -0300)]
V4L/DVB (10798): Add CIMax(R) SP2 Common Interface code for NetUP Dual DVB-S2 CI card
Add CIMax2 Common Interface code for NetUP Dual DVB-S2 CI card.
SmarDTV CIMax(R) SP2 is Dual CableCARD, DVB Common Interface
and OpenCable Hardware Controller.
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Abylay Ospan [Tue, 3 Mar 2009 13:55:38 +0000 (10:55 -0300)]
V4L/DVB (10796): Add init code for NetUP Dual DVB-S2 CI card
Add init code for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Trent Piepho [Tue, 3 Mar 2009 23:44:45 +0000 (20:44 -0300)]
V4L/DVB (10794): v4l2: Move code to zero querybuf output struct to v4l2_ioctl
For VIDIOC_QUERYBUF only the first two fields, size and type, are used as
input. The rest can be filled in by the driver as output. Most drivers do
not actually use all the field and unused ones should be zeroed out. Some
drivers have code to do this and some drivers should but don't. So put
some zero out code in v4l2_ioctl so that all drivers using that system get
it.
The drivers that have zeroing code get that code removed.
Some drivers checked that the type field was valid, but v4l2_ioctl already
does this so those checks can be removed as well.
projects / mirror_ubuntu-focal-kernel.git / log