Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to
ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj.
There should be no functional changes caused by this patch.
Sergei Shtylylov [Mon, 13 Oct 2008 19:39:29 +0000 (21:39 +0200)]
sgiioc4: sgiioc4_read_status drive busy check fix
Fix the drive non-busy criterion used by sgiioc4_read_status(): neither of the
bits it expects to be set guarantees that the drive is not busy (and might be
interrupting), only the BSY bit itself being zero gurantees that.
While at it, use ATA_BUSY instead of hardcoded value everywhere...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 13 Oct 2008 17:08:43 +0000 (10:08 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
Blackfin arch: Fix bogus str_ident check in gpio code
Blackfin arch: AD7879 Touchscreen driver
Blackfin arch: introducing bfin_addr_dcachable
Blackfin arch: fix a typo in comments
Blackfin arch: Remove useless head file
Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
Blackfin arch: update anomaly headers to match the latest sheet
Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
Blackfin arch: print out error/warning if you are running on the incorrect CPU type
Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
Blackfin arch: update board defconfigs
Blackfin arch: Add optional verbose debug
Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
Blackfin arch: ptrace - fix off-by-one check on end of memory regions
Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
Blackfin arch: flash memory map and dm9000 resources updating
Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
...
Linus Torvalds [Mon, 13 Oct 2008 17:06:58 +0000 (10:06 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (33 commits)
ALSA: ASoC codec: remove unused #include <version.h>
ALSA: ASoC: update email address for Liam Girdwood
ALSA: hda: corrected invalid mixer values
ALSA: hda: add mixers for analog mixer on 92hd75xx codecs
ALSA: ASoC: Add destination and source port for DMA on OMAP1
ALSA: ASoC: Drop device registration from GTA01 lm4857 driver
ALSA: ASoC: Fix build of GTA01 audio driver
ALSA: ASoC: Add widgets before setting endpoints on GTA01
ALSA: ASoC: Fix inverted input PGA mute bits in WM8903
ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver
ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver
ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
ALSA: ASoC: Make TLV320AIC26 user-visible
ALSA: ASoC - clean up Kconfig for TLV320AIC2
ALSA: ASoC: Make WM8510 microphone input a DAPM mixer
ALSA: ASoC: Implement WM8510 bias level control
ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers
ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming
ALSA: ASoC: Add WM8510 SPI support
ALSA: ASoC: Add WM8753 SPI support
...
Linus Torvalds [Mon, 13 Oct 2008 17:04:04 +0000 (10:04 -0700)]
Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
proc: remove kernel.maps_protect
proc: remove now unneeded ADDBUF macro
[PATCH] proc: show personality via /proc/pid/personality
[PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock()
proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
proc: make grab_header() static
proc: remove unused get_dma_list()
proc: remove dummy vmcore_open()
proc: proc_sys_root tweak
proc: fix return value of proc_reg_open() in "too late" case
Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h
Linus Torvalds [Mon, 13 Oct 2008 17:00:44 +0000 (10:00 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (24 commits)
integrity: special fs magic
As pointed out by Jonathan Corbet, the timer must be deleted before
ERROR: code indent should use tabs where possible
The tpm_dev_release function is only called for platform devices, not pnp
Protect tpm_chip_list when transversing it.
Renames num_open to is_open, as only one process can open the file at a time.
Remove the BKL calls from the TPM driver, which were added in the overall
netlabel: Add configuration support for local labeling
cipso: Add support for native local labeling and fixup mapping names
netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts
selinux: Cache NetLabel secattrs in the socket's security struct
selinux: Set socket NetLabel based on connection endpoint
netlabel: Add functionality to set the security attributes of a packet
netlabel: Add network address selectors to the NetLabel/LSM domain mapping
netlabel: Add a generic way to create ordered linked lists of network addrs
netlabel: Replace protocol/NetLabel linking with refrerence counts
smack: Fix missing calls to netlbl_skbuff_err()
selinux: Fix missing calls to netlbl_skbuff_err()
selinux: Fix a problem in security_netlbl_sid_to_secattr()
selinux: Better local/forward check in selinux_ip_postroute()
...
* git://git.infradead.org/users/dwmw2/random-2.6:
Fix autoloading of MacBook Pro backlight driver.
Automatic MODULE_ALIAS() for DMI match tables.
Remove asm/a.out.h files for all architectures without a.out support.
Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT
Remove redundant CONFIG_ARCH_SUPPORTS_AOUT
S390: Update comments about why we don't use <asm-generic/statfs.h>
SPARC: Use <asm-generic/statfs.h>
PowerPC: Use <asm-generic/statfs.h>
PARISC: Use <asm-generic/statfs.h>
x86_64: Use <asm-generic/statfs.h>
IA64: Use <asm-generic/statfs.h>
ARM: Use <asm-generic/statfs.h>
Make <asm-generic/statfs.h> suitable for 64-bit platforms.
Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver
[MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ
Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.
EFS: Don't set f_fsid in statfs().
Linus Torvalds [Mon, 13 Oct 2008 16:54:35 +0000 (09:54 -0700)]
Merge phase #5 (misc) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items.
* 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits)
x86: change early_ioremap to use slots instead of nesting
x86: adjust dependencies for CONFIG_X86_CMOV
dumpstack: x86: various small unification steps, fix
x86: remove additional_cpus
x86: remove additional_cpus configurability
x86: improve UP kernel when CPU-hotplug and SMP is enabled
dumpstack: x86: various small unification steps
dumpstack: i386: make kstack= an early boot-param and add oops=panic
dumpstack: x86: use log_lvl and unify trace formatting
dumptrace: x86: consistently include loglevel, print stack switch
dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack
dumpstack: x86: make printk_address equal
dumpstack: x86: move die_nmi to dumpstack_32.c
traps: x86: finalize unification of traps.c
traps: x86: make traps_32.c and traps_64.c equal
traps: x86: various noop-changes preparing for unification of traps_xx.c
traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection
traps: i386: expand clear_mem_error and remove from mach_traps.h
traps: x86_64: make io_check_error equal to the one on i386
traps: i386: use preempt_conditional_sti/cli in do_int3
...
David S. Miller [Mon, 13 Oct 2008 09:45:26 +0000 (10:45 +0100)]
serial: fix device name reporting when minor space is shared between drivers
The multiple drivers share the minor space occupied by a particular major
number, the actual index within the device name's space is indicated by
the tty_driver->name_base + uart_port->line
Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line
Use those to print the device names properly in such situations in
serial_core.c and 8250.c
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:44:57 +0000 (10:44 +0100)]
tty: Remove lots of NULL checks
Many tty drivers contain 'can't happen' checks against NULL pointers passed
in by the tty layer. These have never been possible to occur. Even more
importantly if they ever do occur we want to know as it would be a serious
bug.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Mon, 13 Oct 2008 09:44:33 +0000 (10:44 +0100)]
tty: Fallout from tty-move-canon-specials
Today's linux-next build (x86_64 allmodconfig) failed like this:
/drivers/char/tty_ioctl.c: In function 'change_termios':
drivers/isdn/capi/capi.c:1234: error: implicit declaration of function 'n_tty_ioctl'
drivers/isdn/gigaset/ser-gigaset.c: In function 'gigaset_tty_ioctl':
drivers/isdn/gigaset/ser-gigaset.c:648: error: implicit declaration of function 'n_tty_ioctl'
Alan Cox [Mon, 13 Oct 2008 09:44:17 +0000 (10:44 +0100)]
tty: some ICANON magic is in the wrong places
Move the set up on ldisc change into the ldisc
Move the INQ/OUTQ cases into the driver not in shared ioctl code where it
gives bogus answers for other ldisc values
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:44:08 +0000 (10:44 +0100)]
tty: simplify ktermios allocation
Copy the simplification from the pty unix98 special case to the generic one.
This allows us to kill off driver->termios_locked entirely which is nice. We
have to whack bits of the cris driver as it meddles in places it shouldn't
providing its own arrays that were never used anyway.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:43:48 +0000 (10:43 +0100)]
pty: Fix allocation failure double free
The updating and moving around of the pty code added a bug where both the
helper and caller free the main tty struct (the pty driver must free the
o_tty pair itself however).
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating a new pty, save the pty's inode in the tty->driver_data.
Use this inode in pty_kill() to identify the devpts instance. Since
we now have the inode for the pty, we can skip get_node() lookup and
remove the unused get_node().
TODO:
- check if the mutex_lock is needed in pty_kill().
devpts_pty_new() is called when setting up a new pty and would not
will not have an existing dentry or inode for the pty. So don't bother
looking for an existing dentry - just create a new one.
Pass-in 'inode' or 'tty' parameter to devpts interfaces. With multiple
devpts instances, these parameters will be used in subsequent patches
to identify the instance of devpts mounted. The parameters also help
simplify devpts implementation.
Changelog[v3]:
- minor changes due to merge with ttydev updates
- rename parameters to emphasize they are ptmx or pts inodes
- pass-in tty_struct * to devpts_pty_kill() (this will help
cleanup the get_node() call in a subsequent patch)
Move tty_driver_lookup_tty() and tty_reopen() from tty_init_dev()
into tty_open() (one of the two callers of tty_init_dev()). These
calls are not really required in ptmx_open(), the other caller,
since ptmx_open() would be setting up a new tty.
Changelog[v2]:
- remove the lookup and reopen calls from ptmx_open
- merge with recent changes to ttydev tree
Alan Cox [Mon, 13 Oct 2008 09:42:19 +0000 (10:42 +0100)]
tty: More driver operations
We have the lookup operation abstracted which is nice for pty cleanup but
we really want to abstract the add/remove entries as well so that we can
pull the pty code out of the tty core and create a clear defined interface
for the tty driver table.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:41:42 +0000 (10:41 +0100)]
tty: Remove more special casing and out of place code
Carry on pushing code out of tty_io when it belongs to other drivers. I'm
not 100% happy with some of this and it will be worth revisiting some of the
exports later when the restructuring work is done.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:41:30 +0000 (10:41 +0100)]
tty: shutdown method
Right now there are various drivers that try to use tty->count to know when
they get the final close. Aristeau Rozanski showed while debugging the vt
sysfs race that this isn't entirely safe.
Instead of driver side tricks to work around this introduce a shutdown which
is called when the tty is being destructed. This also means that the shutdown
method is tied into the refcounting.
Use this to rework the console close/sysfs logic.
Remove lots of special case code from the tty core code. The pty code can now
have a shutdown() method that replaces the special case hackery in the tree
free up paths.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:41:16 +0000 (10:41 +0100)]
vt: remove bogus lock dropping
For hysterical raisins the vt layer drops and retakes locks in the write
method. This is a left over from the days when user/kernel data was passed
directly to the tty not pre-buffered.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:41:03 +0000 (10:41 +0100)]
pty: If the administrator creates a device for a ptmx slave we should not error
The open path for ptmx slaves is via the ptmx device. Opening them any
other way is not allowed. Vegard Nossum found that previously this was not
the case and mknod foo c 128 42; cat foo would produce nasty diagnostics
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:40:53 +0000 (10:40 +0100)]
tty: Fix abusers of current->sighand->tty
Various people outside the tty layer still stick their noses in behind the
scenes. We need to make sure they also obey the locking and referencing rules.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:40:43 +0000 (10:40 +0100)]
tty: Redo current tty locking
Currently it is sometimes locked by the tty mutex and sometimes by the
sighand lock. The latter is in fact correct and now we can hand back referenced
objects we can fix this up without problems around sleeping functions.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:40:07 +0000 (10:40 +0100)]
stallion: Use krefs
Use tty_port_init and krefs in the stallion drivers to protect us from devices
going away underneath us. As with the other drives some rearranging is done to
pass the tty structure down properly on the user side.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:39:58 +0000 (10:39 +0100)]
tty: kref usage for isicom and moxa
Rather than blindly keep taking krefs we reorder the code in a few places
to pass the tty down to the right place (which is important as from the user
side it is not the case that tty == port->tty in all situations). For the irq
and related paths use the krefs to stop the tty being freed under us.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:39:46 +0000 (10:39 +0100)]
tty: usb-serial krefs
Use kref in the USB serial drivers so that we don't free tty structures
from under the URB receive handlers as has historically been the case if
you were unlucky. This also gives us a framework for general tty drivers to
use tty_port objects and refcount.
Contains two err->dev_err changes merged together to fix clashes in the
-next tree.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:39:13 +0000 (10:39 +0100)]
tty: Make get_current_tty use a kref
We now return a kref covered tty reference. That ensures the tty structure
doesn't go away when you have a return from get_current_tty. This is not
enough to protect you from most of the resources being freed behind your
back - yet.
[Updated to include fixes for SELinux problems found by Andrew Morton and
an s390 leak found while debugging the former]
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:39:01 +0000 (10:39 +0100)]
tty: compare the tty winsize
We always use the real tty one for stuff so the pty one should not be
compared. As we propagate window changes to both it doesn't currently
matter but will when we tidy up the pty termios logic a bit more
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:38:18 +0000 (10:38 +0100)]
tty: Add termiox
We need a way to describe the various additional modes and flow control
features that random weird hardware shows up and software such as wine
wants to emulate as Windows supports them.
TCGETX/TCSETX and the termiox ioctl are a SYS5 extension that we might as
well adopt. This patches adds the structures and the basic ioctl interfaces
when the TCGETX etc defines are added for an architecture. Drivers wishing
to use this stuff need to add new methods.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:38:07 +0000 (10:38 +0100)]
tty: ipw need reworking
This came in via another tree and unfortunately is rather broken on
the tty side. Comment the apparent locking problems for someone who knows
the driver to look at.
Fix the termios and other ioctl handling. The driver was calling the wrong
methods for what it wanted to do but the right ones existed so its a simple
fix up.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:37:48 +0000 (10:37 +0100)]
tty: Cris has a nice RS485 ioctl so we should steal it
JP Tosoni observed:
"About a RS485 ioctl: could you consider the attached files which are
already in the Linux kernel (in include/asm-cris). They define a
TIOCSERSETRS485 (ioctl.h), and the data structure (rs485.h)
with allows to specify timings. Sounds just like what we want ?"
and he's right: sort of. Rework the structure to use flag bits and make the
time delay a fixed sized field so we don't get 32/64bit problems. Add the ioctls
to x86 so that people know what to add to their platform of choice.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:37:36 +0000 (10:37 +0100)]
tty: use krefs to protect driver module counts
The tty layer keeps driver module counts that are used so the driver knows
when it can be unloaded. For obvious reasons we want to tie that to the
refcounting properly.
At this point the driver side itself isn't refcounted nicely but we can do
that later and kref the drivers.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:36:40 +0000 (10:36 +0100)]
tty: move tioclinux from a special case
Right now we have ifdefs and hooks in the core ioctl handler for TIOCLINUX
and then test if its a console. This is brain dead. Instead call the
tioclinux helper from the relevant driver ioctl methods.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Miller [Mon, 13 Oct 2008 09:36:31 +0000 (10:36 +0100)]
serial: allow 8250 to be used on sparc
This requires three changes:
1) Remove !SPARC restriction in Kconfig.
2) Move Sparc specific serial drivers before 8250, so that serial
console devices don't change names on us, even if 8250 finds
devices.
3) Since the Sparc specific serial drivers try to use the
same major/minor device namespace as 8250, some coordination
is necessary. Use the sunserial_*() layer routines to allocate
minor number space within TTY_MAJOR when CONFIG_SPARC.
This has no effect on other platforms.
Thanks to Josip Rodin for bringing up this issue and testing
plus debugging various revisions of this patch.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Newton [Mon, 13 Oct 2008 09:36:21 +0000 (10:36 +0100)]
8250: remove a few inlines of dubious value
Remove some inlines from various functions that are called once, are too
big to inline, or are called only from slow path code. This saves around
300 bytes of code for me.
Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:36:11 +0000 (10:36 +0100)]
serial_8250: pci_enable_device fail is not fully handled
<rmk> talking about leaks - I noticed that the 'check return of
pci_enable_dev()' in the 8250 pci resume function finally made it in
despite my objections against it (causing stuff in higher levels to
leak).
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Wessel [Mon, 13 Oct 2008 09:35:51 +0000 (10:35 +0100)]
usb: fix pl2303 initialization
This patch removes the private check for the termios_initialized for
the pl2303 usb driver. It forced the baud to 9600 on the first call
to pl2303_set_termios()
Based on the tty changes in the 2.6.27 kernel, the termios passed to
the *_set_termios functions is always populated the first time.
This means there is no need to privately initialize the settings the
first time, and doing so will not allow the use of the kernel
parameter "console=ttyUSB0,115200" as an example.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Mon, 13 Oct 2008 09:35:33 +0000 (10:35 +0100)]
nozomi: Fix close on error
Nozomi assumes the close method isn't called if open errors. The tty layer
is different to other drives in this respect however. Pointed out by Denis J
Barrow.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Miller [Mon, 13 Oct 2008 09:35:23 +0000 (10:35 +0100)]
serial: Make uart_port's ioport "unsigned long".
Otherwise the top 32-bits of the resource value get chopped
off on 64-bit systems, and the resulting I/O accesses go to
random places.
Thanks to testing and debugging by Josip Rodin, which helped
track this down.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miloslav Trmac [Mon, 13 Oct 2008 09:35:15 +0000 (10:35 +0100)]
audit: Handle embedded NUL in TTY input auditing
Data read from a TTY can contain an embedded NUL byte (e.g. after
pressing Ctrl-2, or sent to a PTY). After the previous patch, the data
would be logged only up to the first NUL.
This patch modifies the AUDIT_TTY record to always use the hexadecimal
format, which does not terminate at the first NUL byte. The vast
majority of recorded TTY input data will contain either ' ' or '\n', so
the hexadecimal format would have been used anyway.
Akinobu Mita [Mon, 13 Oct 2008 09:35:05 +0000 (10:35 +0100)]
ip2: avoid add_timer with pending timer
add_timer() is not supposed to be called when the timer is pending.
ip2 driver attempts to avoid that condition by setting and resetting
a flag (TimerOn) in timer function. But there is some gap between
add_timer() and setting TimerOn.
This patch fix this problem by using mod_timer() and remove TimerOn
which has been unnecessary by this change.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Mon, 13 Oct 2008 09:34:56 +0000 (10:34 +0100)]
ip2: init/deinit cleanup
Cleanup of module_init/exit:
- mostly whitespace
- remove empty functions
- replace c++ comments
- remove useless prints (module loaded, unloaded)
- mark the calls as __exit and __init
- use break; and return; to save some indent levels after it
- note resource leakage
Jiri Slaby [Mon, 13 Oct 2008 09:34:27 +0000 (10:34 +0100)]
Char: merge ip2main and ip2base
It's pretty useless to have one setup() function separated along with
module_init() which only calls a function from ip2main anyway. Get rid
of ip2base.
Mike Frysinger [Mon, 13 Oct 2008 09:33:16 +0000 (10:33 +0100)]
Blackfin Serial Driver: move common variables out of serial headers and into the serial driver
move common variables out of serial headers and into the serial driver and
rename "nr_ports" to "nr_active_ports" so as to easily differentiate
between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled)
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-kernels.git / log