Chen-Yu Tsai [Tue, 11 Aug 2015 05:32:55 +0000 (13:32 +0800)]
crypto: sunxi-ss - Document optional reset control bindings
Later Allwinner SoCs split out the reset controls for individual modules
out of the clock gate controls. The "Security System" crypto engine is
no different.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CTR hardware implementation does not match with kernel spec causing a counter bug
where just low 8 bytes are used for counter, when should be all 16bytes.
Since we already have other counter modes working according with specs
not worth to keep CTR itself on NX.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tadeusz Struk [Fri, 7 Aug 2015 18:34:42 +0000 (11:34 -0700)]
PCI: Add quirk for Intel DH895xCC VF PCI config erratum
The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with
QuickAssist Technology is prematurely terminated in hardware.
Workaround the issue by hard-coding the known expected next capability
pointer and saving the PCIE cap into internal buffer.
Patch generated against cryptodev-2.6
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tadeusz Struk [Fri, 7 Aug 2015 18:34:20 +0000 (11:34 -0700)]
crypto: qat - Move adf admin and adf hw arbitrer to common code
Adf admin and HW arbiter function can be used by dh895xcc specific code
well as the new dh895xccvf and future devices so moving them to
qat_common so that they can be shared.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Aaron Sierra [Wed, 5 Aug 2015 21:52:08 +0000 (16:52 -0500)]
crypto: talitos - Prevent panic in probe error path
The probe error path for this driver, for all intents and purposes,
is the talitos_remove() function due to the common "goto err_out".
Without this patch applied, talitos_remove() will panic under these
two conditions:
1. If the RNG device hasn't been registered via
talitos_register_rng() prior to entry into talitos_remove(),
then the attempt to unregister the RNG "device" will cause a panic.
2. If the priv->chan array has not been allocated prior to entry
into talitos_remove(), then the per-channel FIFO cleanup will panic
because of the dereference of that NULL "array".
Both of the above scenarios occur if talitos_probe_irq() fails.
This patch resolves issue #1 by introducing a boolean to mask the
hwrng_unregister() call in talitos_unregister_rng() if RNG device
registration was unsuccessful.
It resolves issue #2 by checking that priv->chan is not NULL in the
per-channel FIFO cleanup for loop.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Steve Cornelius [Wed, 5 Aug 2015 18:28:46 +0000 (11:28 -0700)]
crypto: caam - Enable MXC devices to select CAAM driver in Kconfig
Allow CAAM to be selected in the kernel for Freescale i.MX devices if
ARCH_MXC is enabled.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Change kmalloc to kzalloc to avoid residual data
Since fields must be ORed in to operate correctly using any order of
operations, changed allocations of the combination of extended
descriptor structs + hardware scatterlists to use kzalloc() instead
of kmalloc(), so as to ensure that residue data would not be ORed in
with the correct data.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Enable and disable clocks on Freescale i.MX platforms
ARM-based systems may disable clocking to the CAAM device on the
Freescale i.MX platform for power management purposes. This patch
enables the required clocks when the CAAM module is initialized and
disables the required clocks when the CAAM module is shut down.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Fri, 7 Aug 2015 08:00:04 +0000 (16:00 +0800)]
crypto: authencesn - Fix breakage with new ESP code
The ESP code has been updated to generate a completely linear
AD SG list. This unfortunately broke authencesn which expects
the AD to be divided into at least three parts.
This patch fixes it to cope with the new format. Later we will
fix it properly to accept arbitrary input and not rely on the
input being linear as part of the AEAD conversion.
Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Thu, 30 Jul 2015 09:53:19 +0000 (17:53 +0800)]
crypto: picoxcell - Convert to new AEAD interface
This patch converts picoxcell to the new AEAD interface. IV
generation has been removed since it's equivalent to a software
implementation.
As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory. If an SG
list comes in that exceeds the limit, we will simply use the
fallback.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Thu, 30 Jul 2015 09:53:17 +0000 (17:53 +0800)]
crypto: caam - Convert authenc to new AEAD interface
This patch converts the authenc implementations in caam to the
new AEAD interface. The biggest change is that seqiv no longer
generates a random IV. Instead the IPsec sequence number is used
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Thu, 30 Jul 2015 09:53:14 +0000 (17:53 +0800)]
crypto: testmgr - Disable authenc test and convert test vectors
This patch disables the authenc tests while the conversion to the
new IV calling convention takes place. It also replaces the authenc
test vectors with ones that will work with the new IV convention.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:
crypto: talitos - enhanced talitos_desc struct for SEC1
The build error was:
drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
drivers/crypto/talitos.h:56: warning: missing braces around initializer
drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
make[2]: *** [drivers/crypto/talitos.o] Error 1
make[1]: *** [drivers/crypto] Error 2
make: *** [drivers] Error 2
This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The encap shared descriptor was changed to use the new IV convention.
In the process some commands were shifted, making the output length
zero, caam effectively writing garbage in dst.
While here, update the decap descriptor to execute the "write" commands
before the "read"s (as it previously was).
This makes sure the input fifo is drained before becoming full.
Fixes: 46218750d523 ("crypto: caam - Use new IV convention") Signed-off-by: Horia Geant? <horia.geanta@freescale.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 29 Jul 2015 23:50:46 +0000 (19:50 -0400)]
MAINTAINERS: change 842 NX owner email address
Change my IBM email to my personal IEEE email.
I'm leaving IBM, so my email there won't work anymore. This changes
the owner to my personal email, so I can still get cc'ed on patches,
until someone at IBM sends a patch to take it over.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 29 Jul 2015 23:43:29 +0000 (19:43 -0400)]
crypto: nx - use be32_to_cpu for __be32 field in debug msg
One of the debug messages in the NX 842 PowerNV driver is missing
the required be32_to_cpu() wrapper when accessing the __be32 field
csb->count. Add the wrapper so the message will show the correct count.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 29 Jul 2015 23:42:09 +0000 (19:42 -0400)]
crypto: nx - don't err if compressed output > input
Return success instead of error if compression succeeds but the output is
larger than the input.
It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect. Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bruce Allan [Mon, 27 Jul 2015 19:58:32 +0000 (12:58 -0700)]
crypto: qat - remove unnecessary list iteration
There's no need to iterate through the list for instances in the
accel_table since the number of devices is already known in this file.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: jitterentropy - use safe format string parameters
Since the API for jent_panic() does not include format string parameters,
adjust the call to panic() to use a literal string to avoid any future
callers from leaking format strings into the panic message.
Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bruce Allan [Fri, 24 Jul 2015 20:18:25 +0000 (13:18 -0700)]
crypto: qat - remove unused define
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bruce Allan [Fri, 24 Jul 2015 20:18:25 +0000 (13:18 -0700)]
crypto: qat - fix bug in ADF_RING_SIZE_BYTES_MIN macro
The subject macro mistakenly compares the passed-in ring size in bytes
with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB)
rather than comparing with the intended value of 4096.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bruce Allan [Fri, 24 Jul 2015 20:18:25 +0000 (13:18 -0700)]
crypto: qat - remove redundant struct elem
The element pci_dev_id in the struct adf_hw_device_data is redundant since
the PCI device id can be retrieved from the struct pci_dev.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: core - correct error check of kthread_run call
The kthread_run() function can return two different error values
but the hwrng core only checks for -ENOMEM. If the other error
value -EINTR is returned it is assigned to hwrng_fill and later
used on a kthread_stop() call which naturally crashes.
Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:38 +0000 (14:26 -0400)]
crypto: nx - make platform drivers directly register with crypto
Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers. Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.
The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name. This removes unneeded complexity.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:37 +0000 (14:26 -0400)]
crypto: nx - rename nx-842-crypto.c to nx-842.c
The last commit merged nx-842.c's code into nx-842-crypto.c. It
did not rename nx-842-crypto.c to nx-842.c, in order to let the
patch more clearly show what was merged. This just renames
nx-842-crypto.c to nx-842.c, with no changes to its code.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:36 +0000 (14:26 -0400)]
crypto: nx - merge nx-compress and nx-compress-crypto
Merge the nx-842.c code into nx-842-crypto.c.
This allows later patches to remove the 'platform' driver, and instead
allow each platform driver to directly register with the crypto
compression api.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:35 +0000 (14:26 -0400)]
crypto: nx - use common code for both NX decompress success cases
Replace the duplicated finishing code (set destination buffer length and
set return code to 0) in the case of decompressing a buffer with no header
with a goto to the success case of decompressing a buffer with a header.
This is a trivial change that allows both success cases to use common code,
and includes the pr_debug() msg in both cases as well.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:34 +0000 (14:26 -0400)]
crypto: nx - don't register pSeries driver if ENODEV
Don't register the pSeries driver when parsing the device tree returns
ENODEV.
The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned. However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dan Streetman [Wed, 22 Jul 2015 18:26:32 +0000 (14:26 -0400)]
crypto: nx - remove pSeries NX 'status' field
Remove the 'status' field from the pSeries NX driver data.
The 'status' field isn't used by the driver at all; it simply checks the
devicetree status node at initialization, and returns success if 'okay'
and failure otherwise.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Wed, 22 Jul 2015 10:05:35 +0000 (18:05 +0800)]
crypto: ixp4xx - Remove bogus BUG_ON on scattered dst buffer
This patch removes a bogus BUG_ON in the ablkcipher path that
triggers when the destination buffer is different from the source
buffer and is scattered.
Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tadeusz Struk [Tue, 21 Jul 2015 00:18:27 +0000 (17:18 -0700)]
crypto: qat - fix invalid check for RSA keylen in fips mode
The condition checking allowed key length was invalid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tadeusz Struk [Tue, 21 Jul 2015 00:18:26 +0000 (17:18 -0700)]
crypto: rsa - fix invalid check for keylen in fips mode
The condition checking allowed key length was invalid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: sunxi-ss - Add Allwinner Security System crypto accelerator
Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ARM: sun7i: dt: Add Security System to A20 SoC DTS
The Security System is a hardware cryptographic accelerator that support
AES/MD5/SHA1/DES/3DES/PRNG algorithms.
It could be found on many Allwinner SoC.
This patch enable the Security System on the Allwinner A20 SoC Device-tree.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ARM: sun4i: dt: Add Security System to A10 SoC DTS
The Security System is a hardware cryptographic accelerator that support
AES/MD5/SHA1/DES/3DES/PRNG algorithms.
It could be found on many Allwinner SoC.
This patch enable the Security System on the Allwinner A10 SoC Device-tree.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When successful, the descriptor that performs RNG initialization
is allowed to return a status code of 7000_0000h, since last command
in the descriptor is a JUMP HALT.
Signed-off-by: Horia Geant? <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - fix snooping for write transactions
HW coherency won't work properly for CAAM write transactions
if AWCACHE is left to default (POR) value - 4'b0001.
It has to be programmed to 4'b0010, i.e. AXI3 Cacheable bit set.
For platforms that have HW coherency support:
-PPC-based: the update has no effect; CAAM coherency already works
due to the IOMMU (PAMU) driver setting the correct memory coherency
attributes
-ARM-based: the update fixes cache coherency issues,
since IOMMU (SMMU) driver is not programmed to behave similar to PAMU
Signed-off-by: Horia Geant? <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Martin Willi [Thu, 16 Jul 2015 17:14:07 +0000 (19:14 +0200)]
crypto: poly1305 - Add a two block SSE2 variant for x86_64
Extends the x86_64 SSE2 Poly1305 authenticator by a function processing two
consecutive Poly1305 blocks in parallel using a derived key r^2. Loop
unrolling can be more effectively mapped to SSE instructions, further
increasing throughput.
For large messages, throughput increases by ~45-65% compared to single
block SSE2:
testing speed of poly1305 (poly1305-simd)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec
testing speed of poly1305 (poly1305-simd)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3809514 opers/sec, 365713411 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5973423 opers/sec, 573448627 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9446779 opers/sec, 906890803 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1364814 opers/sec, 393066691 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2045780 opers/sec, 589184697 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3711946 opers/sec, 1069040592 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 573686 opers/sec, 605812732 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1647802 opers/sec, 1740079440 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 292970 opers/sec, 609378224 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 943229 opers/sec, 1961916528 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 494623 opers/sec, 2041804569 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 254045 opers/sec, 2089271014 bytes/sec
Benchmark results from a Core i5-4670T.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Martin Willi [Thu, 16 Jul 2015 17:14:06 +0000 (19:14 +0200)]
crypto: poly1305 - Add a SSE2 SIMD variant for x86_64
Implements an x86_64 assembler driver for the Poly1305 authenticator. This
single block variant holds the 130-bit integer in 5 32-bit words, but uses
SSE to do two multiplications/additions in parallel.
When calling updates with small blocks, the overhead for kernel_fpu_begin/
kernel_fpu_end() negates the perfmance gain. We therefore use the
poly1305-generic fallback for small updates.
For large messages, throughput increases by ~5-10% compared to
poly1305-generic:
testing speed of poly1305 (poly1305-generic)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 4080026 opers/sec, 391682496 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 6221094 opers/sec, 597225024 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9609750 opers/sec, 922536057 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1459379 opers/sec, 420301267 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2115179 opers/sec, 609171609 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3729874 opers/sec, 1074203856 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 593000 opers/sec, 626208000 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1081536 opers/sec, 1142102332 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 302077 opers/sec, 628320576 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 554384 opers/sec, 1153120176 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 278715 opers/sec, 1150536345 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 140202 opers/sec, 1153022070 bytes/sec
testing speed of poly1305 (poly1305-simd)
test 0 ( 96 byte blocks, 16 bytes per update, 6 updates): 3790063 opers/sec, 363846076 bytes/sec
test 1 ( 96 byte blocks, 32 bytes per update, 3 updates): 5913378 opers/sec, 567684355 bytes/sec
test 2 ( 96 byte blocks, 96 bytes per update, 1 updates): 9352574 opers/sec, 897847104 bytes/sec
test 3 ( 288 byte blocks, 16 bytes per update, 18 updates): 1362145 opers/sec, 392297990 bytes/sec
test 4 ( 288 byte blocks, 32 bytes per update, 9 updates): 2007075 opers/sec, 578037628 bytes/sec
test 5 ( 288 byte blocks, 288 bytes per update, 1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test 6 ( 1056 byte blocks, 32 bytes per update, 33 updates): 566272 opers/sec, 597984182 bytes/sec
test 7 ( 1056 byte blocks, 1056 bytes per update, 1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test 8 ( 2080 byte blocks, 32 bytes per update, 65 updates): 288857 opers/sec, 600823808 bytes/sec
test 9 ( 2080 byte blocks, 2080 bytes per update, 1 updates): 590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update, 1 updates): 301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update, 1 updates): 153075 opers/sec, 1258896201 bytes/sec
Benchmark results from a Core i5-4670T.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Martin Willi [Thu, 16 Jul 2015 17:14:04 +0000 (19:14 +0200)]
crypto: testmgr - Add a longer ChaCha20 test vector
The AVX2 variant of ChaCha20 is used only for messages with >= 512 bytes
length. With the existing test vectors, the implementation could not be
tested. Due that lack of such a long official test vector, this one is
self-generated using chacha20-generic.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Martin Willi [Thu, 16 Jul 2015 17:14:02 +0000 (19:14 +0200)]
crypto: chacha20 - Add a four block SSSE3 variant for x86_64
Extends the x86_64 SSSE3 ChaCha20 implementation by a function processing
four ChaCha20 blocks in parallel. This avoids the word shuffling needed
in the single block variant, further increasing throughput.
For large messages, throughput increases by ~110% compared to single block
SSSE3:
testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes)
test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes)
test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes)
test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes)
test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes)
testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes)
test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes)
test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes)
test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes)
test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes)
Benchmark results from a Core i5-4670T.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Martin Willi [Thu, 16 Jul 2015 17:14:01 +0000 (19:14 +0200)]
crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64
Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This
single block variant works on a single state matrix using SSE instructions.
It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate
operations.
For large messages, throughput increases by ~65% compared to
chacha20-generic:
testing speed of chacha20 (chacha20-generic) encryption
test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes)
test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes)
test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes)
test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes)
test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes)
testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes)
test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes)
test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes)
test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes)
test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes)
Benchmark results from a Core i5-4670T.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds individual ChaCha20 and Poly1305 and a combined rfc7539esp AEAD speed
test using mode numbers 214, 321 and 213. For Poly1305 we add a specific
speed template, as it expects the key prepended to the input data.
Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
projects / mirror_ubuntu-hirsute-kernel.git / log