When node is removed from IEEE 1394 bus, any transaction fails to the node.
In the case, ALSA dice driver doesn't stop isochronous contexts even if
they are running. As a result, null pointer dereference occurs in callback
from the running context.
This commit fixes the bug to release isochronous contexts always.
Cc: <stable@vger.kernel.org> # v5.4 or later Fixes: e9f21129b8d8 ("ALSA: dice: support AMDTP domain") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210312093407.23437-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When initialize cadence qspi controller, it is need to set cqspi
to the driver_data field of struct device, because it will be
used in function cqspi_remove/suspend/resume(). Otherwise, there
will be a crash trace as below when invoking these finctions.
Fixes: 31fb632b5d43 ("spi: Move cadence-quadspi driver to drivers/spi/") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Link: https://lore.kernel.org/r/20210311091220.3615-1-Meng.Li@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.
Fixes: 08660086eff9 ("ASoC: ak4458: Add support for AK4458 DAC driver") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1614149872-25510-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The XTS asm helper arrangement is a bit odd: the 8-way stride helper
consists of back-to-back calls to the 4-way core transforms, which
are called indirectly, based on a boolean that indicates whether we
are performing encryption or decryption.
Given how costly indirect calls are on x86, let's switch to direct
calls, and given how the 8-way stride doesn't really add anything
substantial, use a 4-way stride instead, and make the asm core
routine deal with any multiple of 4 blocks. Since 512 byte sectors
or 4 KB blocks are the typical quantities XTS operates on, increase
the stride exported to the glue helper to 512 bytes as well.
As a result, the number of indirect calls is reduced from 3 per 64 bytes
of in/output to 1 per 512 bytes of in/output, which produces a 65% speedup
when operating on 1 KB blocks (measured on a Intel(R) Core(TM) i7-8650U CPU)
Fixes: 9697fa39efd3f ("x86/retpoline/crypto: Convert crypto assembler indirect jumps") Tested-by: Eric Biggers <ebiggers@google.com> # x86_64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add support for being able to set the learning attribute on port, and
make sure that the standalone ports start up with learning disabled.
We can remove the code in bcm_sf2 that configured the ports learning
attribute because we want the standalone ports to have learning disabled
by default and port 7 cannot be bridged, so its learning attribute will
not change past its initial configuration.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
That commit claimed to allow a client to get a read delegation when it
was the only writer. Actually it allowed a client to get a read
delegation when *any* client has a write open!
The main problem is that it's depending on nfs4_clnt_odstate structures
that are actually only maintained for pnfs exports.
This causes clients to miss writes performed by other clients, even when
there have been intervening closes and opens, violating close-to-open
cache consistency.
We can do this a different way, but first we should just revert this.
I've added pynfs 4.1 test DELEG19 to test for this, as I should have
done originally!
Cc: stable@vger.kernel.org Reported-by: Timo Rothenpieler <timo@rothenpieler.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This reverts commit 50747dd5e47b "nfsd4: remove check_conflicting_opens
warning", as a prerequisite for reverting 94415b06eb8a, which has a
serious bug.
Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Commit 5d069dbe8aaf ("fuse: fix bad inode") replaced make_bad_inode()
in fuse_iget() with a private implementation fuse_make_bad().
The private implementation fails to remove the bad inode from inode
cache, so the retry loop with iget5_locked() finds the same bad inode
and marks it bad forever.
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Vladimir Murzin [Tue, 16 Mar 2021 13:43:19 +0000 (13:43 +0000)]
arm64: Unconditionally set virtual cpu id registers
BugLink: https://bugs.launchpad.net/bugs/1921710
Commit 78869f0f0552 ("arm64: Extract parts of el2_setup into a macro")
reorganized el2 setup in such way that virtual cpu id registers set
only in nVHE, yet they used (and need) to be set irrespective VHE
support.
Fixes: 78869f0f0552 ("arm64: Extract parts of el2_setup into a macro") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Given we know the max possible value of ptr_limit at the time of retrieving
the latter, add basic assertions, so that the verifier can bail out if
anything looks odd and reject the program. Nothing triggered this so far,
but it also does not hurt to have these.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Instead of having the mov32 with aux->alu_limit - 1 immediate, move this
operation to retrieve_ptr_limit() instead to simplify the logic and to
allow for subsequent sanity boundary checks inside retrieve_ptr_limit().
This avoids in future that at the time of the verifier masking rewrite
we'd run into an underflow which would not sign extend due to the nature
of mov32 instruction.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Before this patch, function signal_our_withdraw referenced the journal
inode immediately. But corrupt file systems may have some invalid
journals, in which case our attempt to read it in will withdraw and the
resulting signal_our_withdraw would dereference the NULL value.
This patch adds a check to signal_our_withdraw so that if the journal
has not yet been initialized, it simply returns and does the old-style
withdraw.
Thanks, Andy Price, for his analysis.
Reported-by: syzbot+50a8a9cf8127f2c6f5df@syzkaller.appspotmail.com Fixes: 601ef0d52e96 ("gfs2: Force withdraw to replay journals and wait for it to finish") Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Before this patch, sister functions gfs2_make_fs_rw and gfs2_make_fs_ro locked
(held) the freeze glock by calling gfs2_freeze_lock and gfs2_freeze_unlock.
The problem is, not all the callers of gfs2_make_fs_ro should be doing this.
The three callers of gfs2_make_fs_ro are: remount (gfs2_reconfigure),
signal_our_withdraw, and unmount (gfs2_put_super). But when unmounting the
file system we can get into the following circular lock dependency:
This patch moves the hold of the freeze glock outside the two sister rw/ro
functions to their callers, but it doesn't request the glock from
gfs2_put_super, thus eliminating the circular dependency.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Many places in the gfs2 code queued and dequeued the freeze glock.
Almost all of them acquire it in SHARED mode, and need to specify the
same LM_FLAG_NOEXP and GL_EXACT flags.
This patch adds common helper functions gfs2_freeze_lock and gfs2_freeze_unlock
to make the code more readable, and to prepare for the next patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: <stable@vger.kernel.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
do_read() returning 0 bytes read (not -EAGAIN/etc.) is not an important
enough of a case to prioritise it. Fold it into ret < 0 check, so we get
rid of an extra if and make it a bit more readable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.
It's easy to make a mistake in io_cqring_wait() because for all
break/continue clauses we need to watch for prepare/finish_wait to be
used correctly. Extract all those into a new helper
io_cqring_wait_schedule(), and transforming the loop into simple series
of func calls: prepare(); check_and_schedule(); finish();
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
schedule_timeout() with timeout=MAX_SCHEDULE_TIMEOUT is guaranteed to
work just as schedule(), so instead of hand-coding it based on arguments
always use the timeout version and simplify code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Christoph Paasch reported following crash:
dst_release underflow
WARNING: CPU: 0 PID: 1319 at net/core/dst.c:175 dst_release+0xc1/0xd0 net/core/dst.c:175
CPU: 0 PID: 1319 Comm: syz-executor217 Not tainted 5.11.0-rc6af8e85128b4d0d24083c5cac646e891227052e0c #70
Call Trace:
rt_cache_route+0x12e/0x140 net/ipv4/route.c:1503
rt_set_nexthop.constprop.0+0x1fc/0x590 net/ipv4/route.c:1612
__mkroute_output net/ipv4/route.c:2484 [inline]
...
The worker leaves msk->subflow alone even when it
happened to close the subflow ssk associated with it.
Fixes: 866f26f2a9c33b ("mptcp: always graft subflow socket to parent") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/157 Reported-by: Christoph Paasch <cpaasch@apple.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add a few assertions to make sure functions are called with the needed
locks held.
Two functions gain might_sleep annotations because they contain
conditional calls to functions that sleep.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for any ADD_ADDR, not just when ipv6 addresses or port
numbers are included.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Check that PML is actually enabled before setting the mask to force a
SPTE to be write-protected. The bits used for the !AD_ENABLED case are
in the upper half of the SPTE. With 64-bit paging and EPT, these bits
are ignored, but with 32-bit PAE paging they are reserved. Setting them
for L2 SPTEs without checking PML breaks NPT on 32-bit KVM.
Fixes: 1f4e5fc83a42 ("KVM: x86: fix nested guest live migration with PML") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Expand the comment about need to use write-protection for nested EPT
when PML is enabled to clarify that the tagging is a nop when PML is
_not_ enabled. Without the clarification, omitting the PML check looks
wrong at first^Wfifth glance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
netif_device_attach() will unpause the queues so we can't call
it before __alx_open(). This went undetected until
commit b0999223f224 ("alx: add ability to allocate and free
alx_napi structures") but now if stack tries to xmit immediately
on resume before __alx_open() we'll crash on the NAPI being null:
Seth Forshee [Thu, 25 Mar 2021 13:20:39 +0000 (08:20 -0500)]
UBUNTU: [Config] arm64 -- unify build_image and kernel_file values
The arm64 generic and generic-64k build_image and kernel_file variables
are specified per-flavour, but use the same values. Therefore they can
be unified into a single value for this architecture.
Jeremy Szu [Wed, 24 Mar 2021 08:02:32 +0000 (16:02 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
BugLink: https://bugs.launchpad.net/bugs/1920030
The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 53b861bec737c189cc14ec3b5785d0f13445ac0f) Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Jeremy Szu [Wed, 24 Mar 2021 08:02:31 +0000 (16:02 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
BugLink: https://bugs.launchpad.net/bugs/1920030
The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
(backported from commit e7d66cf799390166e90f9a5715f2eede4fe06d51) Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Jeremy Szu [Wed, 24 Mar 2021 08:02:30 +0000 (16:02 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
BugLink: https://bugs.launchpad.net/bugs/1920030
The HP EliteBook 840 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316065452.75659-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit ca6883393f0fa7f13ec8b860dbcef423a759c4a2) Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Libin Yang [Thu, 18 Mar 2021 04:39:15 +0000 (12:39 +0800)]
UBUNTU: SAUCE: ASoC: SOF: Intel: TGL: set shutdown callback to hda_dsp_shutdown
BugLink: https://bugs.launchpad.net/bugs/1919930
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Define the shutdown function to use
snd_sof_suspend as shutdown callback to make sure DSP is in D3 state.
Fixes: 44a4cfad8d78 ("ASoC: SOF: Intel: tgl: do thorough remove at .shutdown() callback") Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com>
(cherry picked from commit 31627609bbf60163317832644a241f6dc1f3e9b6
git://github.com/thesofproject/linux.git topic/sof-dev) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Keyon Jie [Thu, 18 Mar 2021 04:39:14 +0000 (12:39 +0800)]
ASoC: SOF: Intel: tgl: do thorough remove at .shutdown() callback
BugLink: https://bugs.launchpad.net/bugs/1919930
Invoke hda_dsp_remove() as the .shutdown() callback. This will help to
perform shutdown of the DSP safely on TGL platforms before shutting down
or rebooting the system.
BugLink: https://github.com/thesofproject/linux/issues/2571 Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210113152617.4048541-4-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 44a4cfad8d78efcda9ec0dd97ceea38d8b602f24) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Keyon Jie [Thu, 18 Mar 2021 04:39:13 +0000 (12:39 +0800)]
ASoC: SOF: sof-pci-dev: add .shutdown() callback
BugLink: https://bugs.launchpad.net/bugs/1919930
Add the .shutdown() callback to the sof-pci-dev driver, to help to
handle shutting down specific tasks for SOF PCI platforms.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210113152617.4048541-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 3475b44c7601d6f2b4d96e731047ef73fd2f1eb2) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210113152617.4048541-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit daff7f1478e12cdee3e639c83c571cfd38bc5080) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210113152617.4048541-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 7edb3051f11683640c38b93e183ef1676090a79b) Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Hui Wang [Thu, 18 Mar 2021 04:39:16 +0000 (12:39 +0800)]
UBUNTU: [Config] set SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 to n
BugLink: https://bugs.launchpad.net/bugs/1919930
Intel recommend to set this kconfig option to n, it will introduce
hang issue on the TGL machines, and Intel sofproject kernel also set
it to n by default.
Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Piotr Krysiuk [Tue, 16 Mar 2021 10:44:42 +0000 (11:44 +0100)]
bpf, selftests: Fix up some test_verifier cases for unprivileged
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
(cherry picked from commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3)
CVE-2020-27170 Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Piotr Krysiuk [Tue, 16 Mar 2021 07:20:16 +0000 (08:20 +0100)]
bpf: Fix off-by-one for area size in creating mask to left
retrieve_ptr_limit() computes the ptr_limit for registers with stack and
map_value type. ptr_limit is the size of the memory area that is still
valid / in-bounds from the point of the current position and direction
of the operation (add / sub). This size will later be used for masking
the operation such that attempting out-of-bounds access in the speculative
domain is redirected to remain within the bounds of the current map value.
When masking to the right the size is correct, however, when masking to
the left, the size is off-by-one which would lead to an incorrect mask
and thus incorrect arithmetic operation in the non-speculative domain.
Piotr found that if the resulting alu_limit value is zero, then the
BPF_MOV32_IMM() from the fixup_bpf_calls() rewrite will end up loading
0xffffffff into AX instead of sign-extending to the full 64 bit range,
and as a result, this allows abuse for executing speculatively out-of-
bounds loads against 4GB window of address space and thus extracting the
contents of kernel memory via side-channel.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
(cherry picked from commit 10d2bb2e6b1d8c4576c56a748f697dbeb8388899 git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git)
CVE-2020-27171 Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Piotr Krysiuk [Tue, 16 Mar 2021 08:47:02 +0000 (09:47 +0100)]
bpf: Prohibit alu ops for pointer types not defining ptr_limit
The purpose of this patch is to streamline error propagation and in particular
to propagate retrieve_ptr_limit() errors for pointer types that are not defining
a ptr_limit such that register-based alu ops against these types can be rejected.
The main rationale is that a gap has been identified by Piotr in the existing
protection against speculatively out-of-bounds loads, for example, in case of
ctx pointers, unprivileged programs can still perform pointer arithmetic. This
can be abused to execute speculatively out-of-bounds loads without restrictions
and thus extract contents of kernel memory.
Fix this by rejecting unprivileged programs that attempt any pointer arithmetic
on unprotected pointer types. The two affected ones are pointer to ctx as well
as pointer to map. Field access to a modified ctx' pointer is rejected at a
later point in time in the verifier, and 7c6967326267 ("bpf: Permit map_ptr
arithmetic with opcode add and offset 0") only relevant for root-only use cases.
Risk of unprivileged program breakage is considered very low.
Fixes: 7c6967326267 ("bpf: Permit map_ptr arithmetic with opcode add and offset 0") Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
(cherry picked from commit f232326f6966cf2a1d1db7bc917a4ce5f9f55f76 git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git)
CVE-2020-27170 Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Seth Forshee [Wed, 17 Mar 2021 20:06:25 +0000 (15:06 -0500)]
UBUNTU: [Config] add rc-cec to modules.ignore
BugLink: https://bugs.launchpad.net/bugs/1919492
This was moved into rc-core by stable commit "media: rc: compile
rc-cec.c into rc-core". Add to modules.ignore to avoid abi check errors.
Seth Forshee [Wed, 17 Mar 2021 18:54:43 +0000 (13:54 -0500)]
UBUNTU: [Config] Update for removal of CONFIG_PCIE_BW
BugLink: https://bugs.launchpad.net/bugs/1919492
This option was removed by stable commit "PCI/LINK: Remove bandwidth
notification", so update the configs and remove the annotation.
When panicking from the nVHE hyp and restoring the host context, x29 is
expected to hold a pointer to the host context. This wasn't being done
so fix it to make sure there's a valid pointer the host context being
used.
Rather than passing a boolean indicating whether or not the host context
should be restored, instead pass the pointer to the host context. NULL
is passed to indicate that no context should be restored.
There could be struct pages that are not backed by actual physical memory.
This can happen when the actual memory bank is not a multiple of
SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem() function
that iterates through PFNs in holes in memblock.memory and if there is a
struct page corresponding to a PFN, the fields of this page are set to
default values and it is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
Before commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock
regions rather that check each PFN") the holes inside a zone were
re-initialized during memmap_init() and got their zone/node links right.
However, after that commit nothing updates the struct pages representing
such holes.
On a system that has firmware reserved holes in a zone above ZONE_DMA, for
instance in a configuration below:
in set_pfnblock_flags_mask() when called with a struct page from a range
other than E820_TYPE_RAM because there are pages in the range of
ZONE_DMA32 but the unset zone link in struct page makes them appear as a
part of ZONE_DMA.
Interleave initialization of the unavailable pages with the normal
initialization of memory map, so that zone and node information will be
properly set on struct pages that are not backed by the actual memory.
With this change the pages for holes inside a zone will get proper
zone/node links and the pages that are not spanned by any node will get
links to the adjacent zone/node. The holes between nodes will be
prepended to the zone/node above the hole and the trailing pages in the
last section that will be appended to the zone/node below.
[akpm@linux-foundation.org: don't initialize static to zero, use %llu for u64]
Link: https://lkml.kernel.org/r/20210225224351.7356-2-rppt@kernel.org Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reported-by: Qian Cai <cai@lca.pw> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Łukasz Majczak <lma@semihalf.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Sarvela, Tomi P" <tomi.p.sarvela@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Rename mem_cgroup_split_huge_fixup to split_page_memcg and explicitly pass
in page number argument.
In this way, the interface name is more common and can be used by
potential users. In addition, the complete info(memcg and flag) of the
memcg needs to be set to the tail pages.
Link: https://lkml.kernel.org/r/20210304074053.65527-2-zhouguanghui1@huawei.com Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Weilong Chen <chenweilong@huawei.com> Cc: Rui Xiang <rui.xiang@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
As described in the split_page() comment, for the non-compound high order
page, the sub-pages must be freed individually. If the memcg of the first
page is valid, the tail pages cannot be uncharged when be freed.
For example, when alloc_pages_exact is used to allocate 1MB continuous
physical memory, 2MB is charged(kmemcg is enabled and __GFP_ACCOUNT is
set). When make_alloc_exact free the unused 1MB and free_pages_exact free
the applied 1MB, actually, only 4KB(one page) is uncharged.
Therefore, the memcg of the tail page needs to be set when splitting a
page.
Michel:
There are at least two explicit users of __GFP_ACCOUNT with
alloc_exact_pages added recently. See 7efe8ef274024 ("KVM: arm64:
Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT") and c419621873713
("KVM: s390: Add memcg accounting to KVM allocations"), so this is not
just a theoretical issue.
Link: https://lkml.kernel.org/r/20210304074053.65527-3-zhouguanghui1@huawei.com Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Rui Xiang <rui.xiang@huawei.com> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Weilong Chen <chenweilong@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
process_madvise currently requires ptrace attach capability.
PTRACE_MODE_ATTACH gives one process complete control over another
process. It effectively removes the security boundary between the two
processes (in one direction). Granting ptrace attach capability even to a
system process is considered dangerous since it creates an attack surface.
This severely limits the usage of this API.
The operations process_madvise can perform do not affect the correctness
of the operation of the target process; they only affect where the data is
physically located (and therefore, how fast it can be accessed). What we
want is the ability for one process to influence another process in order
to optimize performance across the entire system while leaving the
security boundary intact.
Replace PTRACE_MODE_ATTACH with a combination of PTRACE_MODE_READ and
CAP_SYS_NICE. PTRACE_MODE_READ to prevent leaking ASLR metadata and
CAP_SYS_NICE for influencing process performance.
Link: https://lkml.kernel.org/r/20210303185807.2160264-1-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Jann Horn <jannh@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <stable@vger.kernel.org> [5.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Userfaultfd self-test fails occasionally, indicating a memory corruption.
Analyzing this problem indicates that there is a real bug since mmap_lock
is only taken for read in mwriteprotect_range() and defers flushes, and
since there is insufficient consideration of concurrent deferred TLB
flushes in wp_page_copy(). Although the PTE is flushed from the TLBs in
wp_page_copy(), this flush takes place after the copy has already been
performed, and therefore changes of the page are possible between the time
of the copy and the time in which the PTE is flushed.
To make matters worse, memory-unprotection using userfaultfd also poses a
problem. Although memory unprotection is logically a promotion of PTE
permissions, and therefore should not require a TLB flush, the current
userrfaultfd code might actually cause a demotion of the architectural PTE
permission: when userfaultfd_writeprotect() unprotects memory region, it
unintentionally *clears* the RW-bit if it was already set. Note that this
unprotecting a PTE that is not write-protected is a valid use-case: the
userfaultfd monitor might ask to unprotect a region that holds both
write-protected and write-unprotected PTEs.
The scenario that happens in selftests/vm/userfaultfd is as follows:
This race exists since commit 292924b26024 ("userfaultfd: wp: apply
_PAGE_UFFD_WP bit"). Yet, as Yu Zhao pointed, these races became apparent
since commit 09854ba94c6a ("mm: do_wp_page() simplification") which made
wp_page_copy() more likely to take place, specifically if page_count(page)
> 1.
To resolve the aforementioned races, check whether there are pending
flushes on uffd-write-protected VMAs, and if there are, perform a flush
before doing the COW.
Further optimizations will follow to avoid during uffd-write-unprotect
unnecassary PTE write-protection and TLB flushes.
Link: https://lkml.kernel.org/r/20210304095423.3825684-1-namit@vmware.com Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Signed-off-by: Nadav Amit <namit@vmware.com> Suggested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
zero_user_segments() is used from __block_write_begin_int(), for example
like the following
zero_user_segments(page, 4096, 1024, 512, 918)
But new the zero_user_segments() implementation for for HIGHMEM +
TRANSPARENT_HUGEPAGE doesn't handle "start > end" case correctly, and hits
BUG_ON(). (we can fix __block_write_begin_int() instead though, it is the
old and multiple usage)
Also it calls kmap_atomic() unnecessarily while start == end == 0.
Link: https://lkml.kernel.org/r/87v9ab60r4.fsf@mail.parknet.co.jp Fixes: 0060ef3b4e6d ("mm: support THPs in zero_user_segments") Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
When registering a memslot, we check the size and location of that
memslot against the IPA size to ensure that we can provide guest
access to the whole of the memory.
Unfortunately, this check rejects memslot that end-up at the exact
limit of the addressing capability for a given IPA size. For example,
it refuses the creation of a 2GB memslot at 0x8000000 with a 32bit
IPA space.
Fix it by relaxing the check to accept a memslot reaching the
limit of the IPA space.
Fixes: c3058d5da222 ("arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE") Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20210311100016.3830038-3-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
KVM/arm64 has forever used a 40bit default IPA space, partially
due to its 32bit heritage (where the only choice is 40bit).
However, there are implementations in the wild that have a *cough*
much smaller *cough* IPA space, which leads to a misprogramming of
VTCR_EL2, and a guest that is stuck on its first memory access
if userspace dares to ask for the default IPA setting (which most
VMMs do).
Instead, blundly reject the creation of such VM, as we can't
satisfy the requirements from userspace (with a one-off warning).
Also clarify the boot warning, and document that the VM creation
will fail when an unsupported IPA size is provided.
Although this is an ABI change, it doesn't really change much
for userspace:
- the guest couldn't run before this change, but no error was
returned. At least userspace knows what is happening.
- a memory slot that was accepted because it did fit the default
IPA space now doesn't even get a chance to be registered.
The other thing that is left doing is to convince userspace to
actually use the IPA space setting instead of relying on the
antiquated default.
Fixes: 233a7cb23531 ("kvm: arm64: Allow tuning the physical address size for VM") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20210311100016.3830038-2-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
The nVHE KVM hyp drains and disables the SPE buffer, before
entering the guest, as the EL1&0 translation regime
is going to be loaded with that of the guest.
But this operation is performed way too late, because :
- The owning translation regime of the SPE buffer
is transferred to EL2. (MDCR_EL2_E2PB == 0)
- The guest Stage1 is loaded.
Thus the flush could use the host EL1 virtual address,
but use the EL2 translations instead of host EL1, for writing
out any cached data.
Fix this by moving the SPE buffer handling early enough.
The restore path is doing the right thing.
Fixes: 014c4c77aad7 ("KVM: arm64: Improve debug register save/restore flow") Cc: stable@vger.kernel.org Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210302120345.3102874-1-suzuki.poulose@arm.com
Message-Id: <20210305185254.3730990-2-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Commit 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest
context") tracks the currently running vCPU, clearing the pointer to
NULL on exit from a guest.
Unfortunately, the use of 'set_loaded_vcpu' clobbers x1 to point at the
kvm_hyp_ctxt instead of the vCPU context, causing the subsequent RAS
code to go off into the weeds when it saves the DISR assuming that the
CPU context is embedded in a struct vCPU.
Leave x1 alone and use x3 as a temporary register instead when clearing
the vCPU on the guest exit path.
Cc: Marc Zyngier <maz@kernel.org> Cc: Andrew Scull <ascull@google.com> Cc: <stable@vger.kernel.org> Fixes: 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context") Suggested-by: Quentin Perret <qperret@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210226181211.14542-1-will@kernel.org
Message-Id: <20210305185254.3730990-3-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
When walking the page tables at a given level, and if the start
address for the range isn't aligned for that level, we propagate
the misalignment on each iteration at that level.
This results in the walker ignoring a number of entries (depending
on the original misalignment) on each subsequent iteration.
Properly aligning the address before the next iteration addresses
this issue.
Cc: stable@vger.kernel.org Reported-by: Howard Zhang <Howard.Zhang@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Jia He <justin.he@arm.com> Fixes: b1e57de62cfb ("KVM: arm64: Add stand-alone page-table walker infrastructure")
[maz: rewrite commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210303024225.2591-1-justin.he@arm.com
Message-Id: <20210305185254.3730990-9-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
It recently became apparent that the ARMv8 architecture has interesting
rules regarding attributes being used when fetching instructions
if the MMU is off at Stage-1.
In this situation, the CPU is allowed to fetch from the PoC and
allocate into the I-cache (unless the memory is mapped with
the XN attribute at Stage-2).
If we transpose this to vcpus sharing a single physical CPU,
it is possible for a vcpu running with its MMU off to influence
another vcpu running with its MMU on, as the latter is expected to
fetch from the PoU (and self-patching code doesn't flush below that
level).
In order to solve this, reuse the vcpu-private TLB invalidation
code to apply the same policy to the I-cache, nuking it every time
the vcpu runs on a physical CPU that ran another vcpu of the same
VM in the past.
This involve renaming __kvm_tlb_flush_local_vmid() to
__kvm_flush_cpu_context(), and inserting a local i-cache invalidation
there.
The per-cpu vsyscall pvclock data pointer assigns either an element of the
static array hv_clock_boot (#vCPU <= 64) or dynamically allocated memory
hvclock_mem (vCPU > 64), the dynamically memory will not be allocated if
kvmclock vsyscall is disabled, this can result in cpu hotpluged fails in
kvmclock_setup_percpu() which returns -ENOMEM. It's broken for no-vsyscall
and sometimes you end up with vsyscall disabled if the host does something
strange. This patch fixes it by allocating this dynamically memory
unconditionally even if vsyscall is disabled.
Fixes: 6a1cac56f4 ("x86/kvm: Use __bss_decrypted attribute in shared variables") Reported-by: Zelin Deng <zelin.deng@linux.alibaba.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: stable@vger.kernel.org#v4.19-rc5+ Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614130683-24137-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
When posting a deadline timer interrupt, open code the checks guarding
__kvm_wait_lapic_expire() in order to skip the lapic_timer_int_injected()
check in kvm_wait_lapic_expire(). The injection check will always fail
since the interrupt has not yet be injected. Moving the call after
injection would also be wrong as that wouldn't actually delay delivery
of the IRQ if it is indeed sent via posted interrupt.
Fixes: 010fd37fddf6 ("KVM: LAPIC: Reduce world switch latency caused by timer_advance_ns") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305021808.3769732-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
On a 32-bit fast syscall that fails to read its arguments from user
memory, the kernel currently does syscall exit work but not
syscall entry work. This confuses audit and ptrace. For example:
The #VC handler must run in atomic context and cannot sleep. This is a
problem when it tries to fetch instruction bytes from user-space via
copy_from_user().
Introduce a insn_fetch_from_user_inatomic() helper which uses
__copy_from_user_inatomic() to safely copy the instruction bytes to
kernel memory in the #VC handler.
The code in the NMI handler to adjust the #VC handler IST stack is
needed in case an NMI hits when the #VC handler is still using its IST
stack.
But the check for this condition also needs to look if the regs->sp
value is trusted, meaning it was not set by user-space. Extend the check
to not use regs->sp when the NMI interrupted user-space code or the
SYSCALL gap.
Introduce a helper to check whether an exception came from the syscall
gap and use it in the SEV-ES code. Extend the check to also cover the
compatibility SYSCALL entry path.
KASAN reserves "redzone" areas between stack frames in order to detect
stack overruns. A read or write to such an area triggers a KASAN
"stack-out-of-bounds" BUG.
Normally, the ORC unwinder stays in-bounds and doesn't access the
redzone. But sometimes it can't find ORC metadata for a given
instruction. This can happen for code which is missing ORC metadata, or
for generated code. In such cases, the unwinder attempts to fall back
to frame pointers, as a best-effort type thing.
This fallback often works, but when it doesn't, the unwinder can get
confused and go off into the weeds into the KASAN redzone, triggering
the aforementioned KASAN BUG.
But in this case, the unwinder's confusion is actually harmless and
working as designed. It already has checks in place to prevent
off-stack accesses, but those checks get short-circuited by the KASAN
BUG. And a BUG is a lot more disruptive than a harmless unwinder
warning.
Disable the KASAN checks by using READ_ONCE_NOCHECK() for all stack
accesses. This finishes the job started by commit 881125bfe65b
("x86/unwind: Disable KASAN checking in the ORC unwinder"), which only
partially fixed the issue.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder") Reported-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Ivan Babrou <ivan@cloudflare.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/9583327904ebbbeda399eca9c56d6c7085ac20fe.1612534649.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
There's a runtime failure when running HW_TAGS-enabled kernel built with
GCC on hardware that doesn't support MTE. GCC-built kernels always have
CONFIG_KASAN_STACK enabled, even though stack instrumentation isn't
supported by HW_TAGS. Having that config enabled causes KASAN to issue
MTE-only instructions to unpoison kernel stacks, which causes the failure.
Fix the issue by disallowing CONFIG_KASAN_STACK when HW_TAGS is used.
(The commit that introduced CONFIG_KASAN_HW_TAGS specified proper
dependency for CONFIG_KASAN_STACK_ENABLE but not for CONFIG_KASAN_STACK.)
Currently, kasan_free_nondeferred_pages()->kasan_free_pages() is called
after debug_pagealloc_unmap_pages(). This causes a crash when
debug_pagealloc is enabled, as HW_TAGS KASAN can't set tags on an
unmapped page.
This patch puts kasan_free_nondeferred_pages() before
debug_pagealloc_unmap_pages() and arch_free_page(), which can also make
the page unavailable.
First, in the begining of the function, a lock is taken on the binfmt_misc
root inode with inode_lock(d_inode(root)).
Then, if the user used the MISC_FMT_OPEN_FILE flag, the function will call
open_exec on the user-provided interpreter.
open_exec will call a path lookup, and if the path lookup process includes
the root of binfmt_misc, it will try to take a shared lock on its inode
again, but it is already locked, and the code will get stuck in a deadlock
To reproduce the bug:
$ echo ":iiiii:E::ii::/proc/sys/fs/binfmt_misc/bla:F" > /proc/sys/fs/binfmt_misc/register
backtrace of where the lock occurs (#5):
0 schedule () at ./arch/x86/include/asm/current.h:15
1 0xffffffff81b51237 in rwsem_down_read_slowpath (sem=0xffff888003b202e0, count=<optimized out>, state=state@entry=2) at kernel/locking/rwsem.c:992
2 0xffffffff81b5150a in __down_read_common (state=2, sem=<optimized out>) at kernel/locking/rwsem.c:1213
3 __down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1222
4 down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1355
5 0xffffffff811ee22a in inode_lock_shared (inode=<optimized out>) at ./include/linux/fs.h:783
6 open_last_lookups (op=0xffffc9000022fe34, file=0xffff888004098600, nd=0xffffc9000022fd10) at fs/namei.c:3177
7 path_openat (nd=nd@entry=0xffffc9000022fd10, op=op@entry=0xffffc9000022fe34, flags=flags@entry=65) at fs/namei.c:3366
8 0xffffffff811efe1c in do_filp_open (dfd=<optimized out>, pathname=pathname@entry=0xffff8880031b9000, op=op@entry=0xffffc9000022fe34) at fs/namei.c:3396
9 0xffffffff811e493f in do_open_execat (fd=fd@entry=-100, name=name@entry=0xffff8880031b9000, flags=<optimized out>, flags@entry=0) at fs/exec.c:913
10 0xffffffff811e4a92 in open_exec (name=<optimized out>) at fs/exec.c:948
11 0xffffffff8124aa84 in bm_register_write (file=<optimized out>, buffer=<optimized out>, count=19, ppos=<optimized out>) at fs/binfmt_misc.c:682
12 0xffffffff811decd2 in vfs_write (file=file@entry=0xffff888004098500, buf=buf@entry=0xa758d0 ":iiiii:E::ii::i:CF
", count=count@entry=19, pos=pos@entry=0xffffc9000022ff10) at fs/read_write.c:603
13 0xffffffff811defda in ksys_write (fd=<optimized out>, buf=0xa758d0 ":iiiii:E::ii::i:CF
", count=19) at fs/read_write.c:658
14 0xffffffff81b49813 in do_syscall_64 (nr=<optimized out>, regs=0xffffc9000022ff58) at arch/x86/entry/common.c:46
15 0xffffffff81c0007c in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:120
To solve the issue, the open_exec call is moved to before the write
lock is taken by bm_register_write
Add stub instances of enable_kernel_vsx() and disable_kernel_vsx()
when CONFIG_VSX is not set, to avoid following build failure.
CC [M] drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:29,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:37,
from drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:27:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c: In function 'dcn_bw_apply_registry_override':
./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:64:3: error: implicit declaration of function 'enable_kernel_vsx'; did you mean 'enable_kernel_fp'? [-Werror=implicit-function-declaration]
64 | enable_kernel_vsx(); \
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:640:2: note: in expansion of macro 'DC_FP_START'
640 | DC_FP_START();
| ^~~~~~~~~~~
./drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:75:3: error: implicit declaration of function 'disable_kernel_vsx'; did you mean 'disable_kernel_fp'? [-Werror=implicit-function-declaration]
75 | disable_kernel_vsx(); \
| ^~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:676:2: note: in expansion of macro 'DC_FP_END'
676 | DC_FP_END();
| ^~~~~~~~~
cc1: some warnings being treated as errors
make[5]: *** [drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.o] Error 1
This works because the caller is checking if VSX is available using
cpu_has_feature():
When CONFIG_VSX is not selected, cpu_has_feature(CPU_FTR_VSX_COMP)
constant folds to 'false' so the call to enable_kernel_vsx() is
discarded and the build succeeds.
Fixes: 16a9dea110a6 ("amdgpu: Enable initial DCN support on POWER") Cc: stable@vger.kernel.org # v5.6+ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Incorporate some discussion comments into the change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8d7d285a027e9d21f5ff7f850fa71a2655b0c4af.1615279170.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
The EFI_RT_PROPERTIES_TABLE contains a mask of runtime services that are
available after ExitBootServices(). This mostly does not concern the EFI
stub at all, given that it runs before that. However, there is one call
that is made at runtime, which is the call to SetVirtualAddressMap()
(which is not even callable at boot time to begin with)
So add the missing handling of the RT_PROP table to ensure that we only
call SetVirtualAddressMap() if it is not being advertised as unsupported
by the firmware.
Now that we have set_affinity_pending::stop_pending to indicate if a
stopper is in progress, and we have the guarantee that if that stopper
exists, it will (eventually) complete our @pending we can simplify the
refcount scheme by no longer counting the stopper thread.
Then the first will install p->migration_pending = &my_pending; and
issue stop_one_cpu_nowait(pending); and the second one will read
p->migration_pending and _also_ issue: stop_one_cpu_nowait(pending),
the _SAME_ @pending.
This causes stopper list corruption.
Add set_affinity_pending::stop_pending, to indicate if a stopper is in
progress.
When affine_move_task() issues a migration_cpu_stop(), the purpose of
that function is to complete that @pending, not any random other
p->migration_pending that might have gotten installed since.
This realization much simplifies migration_cpu_stop() and allows
further necessary steps to fix all this as it provides the guarantee
that @pending's stopper will complete @pending (and not some random
other @pending).
The function sync_runqueues_membarrier_state() should copy the
membarrier state from the @mm received as parameter to each runqueue
currently running tasks using that mm.
However, the use of smp_call_function_many() skips the current runqueue,
which is unintended. Replace by a call to on_each_cpu_mask().
When affine_move_task(p) is called on a running task @p, which is not
otherwise already changing affinity, we'll first set
p->migration_pending and then do:
This then gets us to migration_cpu_stop() running on the CPU that was
previously running our victim task @p.
If we find that our task is no longer on that runqueue (this can
happen because of a concurrent migration due to load-balance etc.),
then we'll end up at the:
} else if (dest_cpu < 1 || pending) {
branch. Which we'll take because we set pending earlier. Here we first
check if the task @p has already satisfied the affinity constraints,
if so we bail early [A]. Otherwise we'll reissue migration_cpu_stop()
onto the CPU that is now hosting our task @p:
Except, we've never initialized pending->arg, which will be all 0s.
This then results in running migration_cpu_stop() on the next CPU with
arg->p == NULL, which gives the by now obvious result of fireworks.
The cure is to change affine_move_task() to always use pending->arg,
furthermore we can use the exact same pattern as the
SCA_MIGRATE_ENABLE case, since we'll block on the pending->done
completion anyway, no point in adding yet another completion in
stop_one_cpu().
This then gives a clear distinction between the two
migration_cpu_stop() use cases:
And we can have it ignore p->migration_pending when !arg->pending. Any
stop work from sched_exec() / migrate_task_to() is in addition to stop
works from affine_move_task(), which will be sufficient to issue the
completion.
Separating compiler-clang.h from compiler-gcc.h inadventently dropped the
definitions of the three HAVE_BUILTIN_BSWAP macros, which requires falling
back to the open-coded version and hoping that the compiler detects it.
Since all versions of clang support the __builtin_bswap interfaces, add
back the flags and have the headers pick these up automatically.
This results in a 4% improvement of compilation speed for arm defconfig.
Note: it might also be worth revisiting which architectures set
CONFIG_ARCH_USE_BUILTIN_BSWAP for one compiler or the other, today this is
set on six architectures (arm32, csky, mips, powerpc, s390, x86), while
another ten architectures define custom helpers (alpha, arc, ia64, m68k,
mips, nios2, parisc, sh, sparc, xtensa), and the rest (arm64, h8300,
hexagon, microblaze, nds32, openrisc, riscv) just get the unoptimized
version and rely on the compiler to detect it.
A long time ago, the compiler builtins were architecture specific, but
nowadays, all compilers that are able to build the kernel have correct
implementations of them, though some may not be as optimized as the inline
asm versions.
The patch that dropped the optimization landed in v4.19, so as discussed
it would be fairly safe to backport this revert to stable kernels to the
4.19/5.4/5.10 stable kernels, but there is a remaining risk for
regressions, and it has no known side-effects besides compile speed.
Link: https://lkml.kernel.org/r/20210226161151.2629097-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/20210225164513.3667778-1-arnd@kernel.org/ Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Guo Ren <guoren@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Marco Elver <elver@google.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
commit 0d8359620d9b ("zram: support page writeback") introduced two
problems. It overwrites writeback_store's return value as kstrtol's
return value, which makes return value zero so user could see zero as
return value of write syscall even though it wrote data successfully.
It also breaks index value in the loop in that it doesn't increase the
index any longer. It means it can write only first starting block index
so user couldn't write all idle pages in the zram so lose memory saving
chance.
This patch fixes those issues.
Link: https://lkml.kernel.org/r/20210312173949.2197662-2-minchan@kernel.org Fixes: 0d8359620d9b("zram: support page writeback") Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Amos Bianchi <amosbianchi@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: John Dias <joaodias@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
writeback_store's return value is overwritten by submit_bio_wait's return
value. Thus, writeback_store will return zero since there was no IO
error. In the end, write syscall from userspace will see the zero as
return value, which could make the process stall to keep trying the write
until it will succeed.
Link: https://lkml.kernel.org/r/20210312173949.2197662-1-minchan@kernel.org Fixes: 3b82a051c101("drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store") Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: John Dias <joaodias@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
With clang-13, some functions only get partially inlined, with a
specialized version referring to a global variable. This triggers a
harmless build-time check for the intel-rng driver:
WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init()
The function stop_machine() references
the function __init intel_rng_hw_init().
This is often because stop_machine lacks a __init
annotation or the annotation of intel_rng_hw_init is wrong.
In this instance, an easy workaround is to force the stop_machine()
function to be inline, along with related interfaces that did not show the
same behavior at the moment, but theoretically could.
The combination of the two patches listed below triggers the behavior in
clang-13, but individually these commits are correct.
Link: https://lkml.kernel.org/r/20210225130153.1956990-1-arnd@kernel.org Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()") Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
The inlining logic in clang-13 is rewritten to often not inline some
functions that were inlined by all earlier compilers.
In case of the memblock interfaces, this exposed a harmless bug of a
missing __init annotation:
WARNING: modpost: vmlinux.o(.text+0x507c0a): Section mismatch in reference from the function memblock_bottom_up() to the variable .meminit.data:memblock
The function memblock_bottom_up() references
the variable __meminitdata memblock.
This is often because memblock_bottom_up lacks a __meminitdata
annotation or the annotation of memblock is wrong.
Interestingly, these annotations were present originally, but got removed
with the explanation that the __init annotation prevents the function from
getting inlined. I checked this again and found that while this is the
case with clang, gcc (version 7 through 10, did not test others) does
inline the functions regardless.
As the previous change was apparently intended to help the clang builds,
reverting it to help the newer clang versions seems appropriate as well.
gcc builds don't seem to care either way.
Link: https://lkml.kernel.org/r/20210225133808.2188581-1-arnd@kernel.org Fixes: 5bdba520c1b3 ("mm: memblock: drop __init from memblock functions to make it inline")
Reference: 2cfb3665e864 ("include/linux/memblock.h: add __init to memblock_set_bottom_up()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Aslan Bakirov <aslan@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
seqcount_init() must be a macro in order to preserve the static
variable that is used for the lockdep key. Don't then wrap it in an
inline function, which destroys that.
Luckily there aren't many users of this function, but fix it before it
becomes a problem.
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da70160462e ("hrtimer: Implement support for softirq based hrtimers") Reported-by: Mikael Beckius <mikael.beckius@windriver.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikael Beckius <mikael.beckius@windriver.com> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
To supply a PID/TID for large PEBS, it requires flushing the PEBS buffer
in a context switch.
For normal LBRs, a context switch can flip the address space and LBR
entries are not tagged with an identifier, we need to wipe the LBR, even
for per-cpu events.
For LBR callstack, save/restore the stack is required during a context
switch.
Set PERF_ATTACH_SCHED_CB for the event with large PEBS & LBR.
Fixes: 9c964efa4330 ("perf/x86/intel: Drain the PEBS buffer during context switches") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20201130193842.10569-2-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Sometimes the PMU internal buffers have to be flushed for per-CPU events
during a context switch, e.g., large PEBS. Otherwise, the perf tool may
report samples in locations that do not belong to the process where the
samples are processed in, because PEBS does not tag samples with PID/TID.
The current code only flush the buffers for a per-task event. It doesn't
check a per-CPU event.
Add a new event state flag, PERF_ATTACH_SCHED_CB, to indicate that the
PMU internal buffers have to be flushed for this event during a context
switch.
Add sched_cb_entry and perf_sched_cb_usages back to track the PMU/cpuctx
which is required to be flushed.
Only need to invoke the sched_task() for per-CPU events in this patch.
The per-task events have been handled in perf_event_context_sched_in/out
already.
Fixes: 9c964efa4330 ("perf/x86/intel: Drain the PEBS buffer during context switches") Reported-by: Gabriel Marin <gmx@google.com> Originally-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20201130193842.10569-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
projects / mirror_ubuntu-hirsute-kernel.git / log