s390/ipl: add helper functions to create an IPL report
PR: Adjusted to the use in kexec_file later.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Read the IPL Report block provided by secure-boot, add the entries
of the certificate list to the system key ring and print the list
of components.
PR: Adjust to Vasilys bootdata_preserved patch set. Preserve ipl_cert_list
for later use in kexec_file.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/ipl: add definitions for the IPL report block
To transport the information required for secure boot a new IPL report
will be created at boot time. It will be written to memory right after
the IPL parameter block. To work with the IPL report a couple of
additional structure definitions are added the the uapi/ipl.h header.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/ipl: provide uapi header for list directed IPL
The IPL parameter block is used as an interface between Linux and
the machine to query and change the boot device and boot options.
To be able to create IPL parameter block in user space and pass it
as segment to kexec provide an uapi header with proper structure
definitions for the block.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ipl_info union in struct ipl_parameter_block has the same name as
the struct ipl_info. This does not help while reading the code and the
union in struct ipl_parameter_block does not need to be named. Drop
the name from the union.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the z14 machine there came also a CPACF hardware extension
which provides a True Random Number Generator. This TRNG can
be accessed with a new subfunction code within the CPACF prno
instruction and provides random data with very high entropy.
So if there is a TRNG available, let's use it for initial seeding
and reseeding instead of the current implementation which tries
to generate entropy based on stckf (store clock fast) jitters.
For details about the amount of data needed and pulled for
seeding and reseeding there can be explaining comments in the
code found.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/crypto: rework generate_entropy function for pseudo random dd
Here is a rework of the generate_entropy function of the pseudo random
device driver exploiting the prno CPACF instruction.
George Spelvin pointed out some issues with the existing
implementation. One point was, that the buffer used to store the stckf
values is 2 pages which are initially filled with get_random_bytes()
for each 64 byte junk produced by the function. Another point was that
the stckf values only carry entropy in the LSB and thus a buffer of
2 pages is not really needed. Then there was a comment about the use
of the kimd cpacf function without proper initialization.
The rework addresses these points and now one page is used and only
one half of this is filled with get_random_bytes() on each chunk of 64
bytes requested data. The other half of the page is filled with stckf
values exored into with an overlap of 4 bytes. This can be done due to
the fact that only the lower 4 bytes carry entropy we need. For more
details about the algorithm used, see the header of the function.
The generate_entropy() function now uses the cpacf function klmd with
proper initialization of the parameter block to perform the sha512
hash.
George also pointed out some issues with the internal buffers used for
seeding and reads. These buffers are now zeroed with memzero_implicit
after use.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reported-by: George Spelvin <lkml@sdf.org> Suggested-by: George Spelvin <lkml@sdf.org> Reviewed-by: Patrick Steuer <steuer@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Farhan Ali [Tue, 16 Apr 2019 21:23:14 +0000 (17:23 -0400)]
vfio-ccw: Prevent quiesce function going into an infinite loop
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Farhan Ali [Mon, 8 Apr 2019 21:05:33 +0000 (17:05 -0400)]
vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev
When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:
[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]
Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com> Acked-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Farhan Ali [Mon, 8 Apr 2019 21:05:31 +0000 (17:05 -0400)]
vfio-ccw: Do not call flush_workqueue while holding the spinlock
Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.
vfio-ccw: add handling for async channel instructions
Add a region to the vfio-ccw device that can be used to submit
asynchronous I/O instructions. ssch continues to be handled by the
existing I/O region; the new region handles hsch and csch.
Interrupt status continues to be reported through the same channels
as for ssch.
Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Tue, 8 Jan 2019 14:53:03 +0000 (15:53 +0100)]
vfio-ccw: protect the I/O region
Introduce a mutex to disallow concurrent reads or writes to the
I/O region. This makes sure that the data the kernel or user
space see is always consistent.
The same mutex will be used to protect the async region as well.
Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Tue, 29 Jan 2019 15:13:57 +0000 (16:13 +0100)]
vfio-ccw: rework ssch state handling
The flow for processing ssch requests can be improved by splitting
the BUSY state:
- CP_PROCESSING: We reject any user space requests while we are in
the process of translating a channel program and submitting it to
the hardware. Use -EAGAIN to signal user space that it should
retry the request.
- CP_PENDING: We have successfully submitted a request with ssch and
are now expecting an interrupt. As we can't handle more than one
channel program being processed, reject any further requests with
-EBUSY. A final interrupt will move us out of this state.
By making this a separate state, we make it possible to issue a
halt or a clear while we're still waiting for the final interrupt
for the ssch (in a follow-on patch).
It also makes a lot of sense not to preemptively filter out writes to
the io_region if we're in an incorrect state: the state machine will
handle this correctly.
Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Mon, 21 Jan 2019 08:55:18 +0000 (09:55 +0100)]
vfio-ccw: make it safe to access channel programs
When we get a solicited interrupt, the start function may have
been cleared by a csch, but we still have a channel program
structure allocated. Make it safe to call the cp accessors in
any case, so we can call them unconditionally.
While at it, also make sure that functions called from other parts
of the code return gracefully if the channel program structure
has not been initialized (even though that is a bug in the caller).
Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With git commit d1874a0c2805fcfa9162c972d6b7541e57adb542
"s390/mm: make the pxd_offset functions more robust" and a 2-level page
table it can now happen that pgd_bad() gets asked to verify a large
segment table entry. If the entry is marked as dirty pgd_bad() will
incorrectly return true.
Change the pgd_bad(), p4d_bad(), pud_bad() and pmd_bad() functions to
first verify the table type, return false if the table level is lower
than what the function is suppossed to check, return true if the table
level is too high, and otherwise check the relevant region and segment
table bits. pmd_bad() has to check against ~SEGMENT_ENTRY_BITS for
normal page table pointers or ~SEGMENT_ENTRY_BITS_LARGE for large
segment table entries. Same for pud_bad() which has to check against
~_REGION_ENTRY_BITS or ~_REGION_ENTRY_BITS_LARGE.
Fixes: d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch/s390/lib/uaccess.c is built without kasan instrumentation. Kasan
checks are performed explicitly in copy_from_user/copy_to_user
functions. But since those functions could be inlined, calls from
files like uaccess.c with instrumentation disabled won't generate
kasan reports. This is currently the case with strncpy_from_user
function which was revealed by newly added kasan test. Avoid inlining of
copy_from_user/copy_to_user when the kernel is built with kasan support
to make sure kasan checks are fully functional.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add support for the CPU-Measurement Facility counter
second version number 6. This number is used to detect some
more counters in the crypto counter set and the extended
counter set.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/mm: convert to the generic get_user_pages_fast code
Define the gup_fast_permitted to check against the asce_limit of the
mm attached to the current task, then replace the s390 specific gup
code with the generic implementation in mm/gup.c.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/mm: make the pxd_offset functions more robust
Change the way how pgd_offset, p4d_offset, pud_offset and pmd_offset
walk the page tables. pgd_offset now always calculates the index for
the top-level page table and adds it to the pgd, this is either a
segment table offset for a 2-level setup, a region-3 offset for 3-levels,
region-2 offset for 4-levels, or a region-1 offset for a 5-level setup.
The other three functions p4d_offset, pud_offset and pmd_offset will
only add the respective offset if they dereference the passed pointer.
With the new way of walking the page tables a sequence like this from
mm/gup.c now works:
s390/qdio: consolidate index tracking for queue scan
qdio.ko offers a small number of high-level functions to drive the
scanning of a QDIO queue for ready-to-process SBALs:
qdio_get_next_buffers(), __[ti]qdio_inbound_processing() and
__qdio_outbound_processing().
Let each of those functions maintain the 'start' index for their current
scan, and pass it to lower-level helpers as needed. This improves the
code's overall layering, and allows us to eliminate the additional
first_to_kick cursor with a follow-on patch.
The 'func_code' variable gets printed in debug statements without
a prior initialization in multiple functions, as reported when building
with clang:
drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
if (mex->outputdatalength < mex->inputdatalength) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here
trace_s390_zcrypt_rep(mex, func_code, rc,
^~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false
if (mex->outputdatalength < mex->inputdatalength) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning
unsigned int func_code;
^
Add initializations to all affected code paths to shut up the warning
and make the warning output consistent.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
llvm on s390 has problems with __builtin_return_address(n), with n>0,
this results in a somewhat cryptic error message:
fatal error: error in backend: Unsupported stack frame traversal count
To work around it, use the direct return address directly. This
is probably not ideal here, but gets things to compile and should
only lead to inferior reporting, not to misbehavior of the generated
code.
llvm skips an empty .bss section entirely, which makes
the check fail with an unexpected error:
/tmp/binutils-multi-test/bin/s390x-linux-gnu-objdump: section '.bss' mentioned in a -j option, but not found in any input file
error: arch/s390/boot/compressed/decompressor.o .bss section is not empty
../arch/s390/scripts/Makefile.chkbss:20: recipe for target 'arch/s390/boot/compressed/decompressor.o.chkbss' failed
Change the check so we first see if a .bss section exists
before trying to read its size.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
clang fails to use the %O and %R inline assembly modifiers
the same way as gcc, leading to build failures with every use
of __load_psw_mask():
/tmp/nmi-4a9f80.s: Assembler messages:
/tmp/nmi-4a9f80.s:571: Error: junk at end of line: `+8(160(%r11))'
/tmp/nmi-4a9f80.s:626: Error: junk at end of line: `+8(160(%r11))'
Replace these with a more conventional way of passing the addresses
that should work with both clang and gcc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Building system calls with clang results in a warning
about an alias from a global function to a static one:
../fs/namei.c:3847:1: warning: unused function '__se_sys_mkdirat' [-Wunused-function]
SYSCALL_DEFINE3(mkdirat, int, dfd, const char __user *, pathname, umode_t, mode)
^
../include/linux/syscalls.h:219:36: note: expanded from macro 'SYSCALL_DEFINE3'
#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
^
../include/linux/syscalls.h:228:2: note: expanded from macro 'SYSCALL_DEFINEx'
__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
^
../arch/s390/include/asm/syscall_wrapper.h:126:18: note: expanded from macro '__SYSCALL_DEFINEx'
asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
^
<scratch space>:31:1: note: expanded from here
__se_sys_mkdirat
^
The only reference to the static __se_sys_mkdirat() here is the alias, but
this only gets evaluated later. Making this function global as well avoids
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This was added as a workaround for really old compilers, and it prevents
building with clang now. I can see no reason for keeping it, as it has
already been removed for most architectures in the pre-git era, so
let's remove it everywhere, rather than only for clang.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The CALL_ON_STACK helper currently does not work with clang and for
calls without arguments. It does not initialize r2 although the constraint
is "+&d". Rework the CALL_FMT_x and the CALL_ON_STACK macros to work
with clang and produce optimal code in all cases.
Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Thomas Huth [Sun, 7 Apr 2019 12:55:09 +0000 (14:55 +0200)]
s390/mm: silence compiler warning when compiling without CONFIG_PGSTE
If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains:
CC arch/s390/mm/pgtable.o
arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not
used [-Wunused-function]
static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr)
^~~~~~~~~~~~~
Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Julian Wiedmann [Thu, 28 Mar 2019 09:45:11 +0000 (10:45 +0100)]
s390/qdio: eliminate queue's last_move cursor
This cursor is used for debugging only. But since
commit "s390/qdio: pass up count of ready-to-process SBALs" it effectively
duplicates the first_to_check cursor, diverging for just a short moment
when get_*_buffer_frontier() updates q->first_to_check.
Julian Wiedmann [Thu, 28 Mar 2019 09:43:46 +0000 (10:43 +0100)]
s390/qdio: simplify SBAL range calculation
When passing a range of ready-to-process SBALs to the upper-layer
driver, use the available 'count' instead of calculating the distance
between the first_to_check and first_to_kick cursors.
This simplifies the logic of the queue-scan path, and opens up the
possibility of scanning all 128 SBALs in one go (as determining the
reported count no longer requires wrap-around safe arithmetic on the
queue's cursors).
Julian Wiedmann [Thu, 28 Mar 2019 09:39:25 +0000 (10:39 +0100)]
s390/qdio: pass up count of ready-to-process SBALs
When qdio_{in,out}bound_q_moved() scans a queue for pending work, it
currently only returns a boolean to its caller. The interface to the
upper-layer-drivers (qdio_kick_handler() and qdio_get_next_buffers())
then re-calculates the number of pending SBALs from the
q->first_to_check and q->first_to_kick cursors.
Refactor this so that whenever get_{in,out}bound_buffer_frontier()
adjusted the queue's first_to_check cursor, it also returns the
corresponding count of ready-to-process SBALs (and 0 else).
A subsequent patch will then make use of this additional information.
Julian Wiedmann [Thu, 28 Mar 2019 12:48:44 +0000 (13:48 +0100)]
s390/qdio: fix output of DSCI value in debug file
The DSCI is a 1-byte field, placed at the start of an u32. So when
printing it to a queue's debug state, limit the output to the part
that's actually occupied by the DSCI.
When the DSCI is set this gives us the expected output of '1', rather
than the current (obscure) value of '16777216'.
The Ultravisor Call Facility (stfle bit 158) defines an API to the
Ultravisor (UV calls), a mini hypervisor located at machine
level. With help of the Ultravisor, KVM will be able to run
"protected" VMs, special VMs whose memory and management data are
unavailable to KVM.
The protected VMs can also request services from the Ultravisor.
The guest api consists of UV calls to share and unshare memory with the
kvm hypervisor.
To enable this feature support PROTECTED_VIRTUALIZATION_GUEST kconfig
option has been introduced.
Co-developed-by: Janosch Frank <frankja@de.ibm.com> Signed-off-by: Janosch Frank <frankja@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390: introduce .boot.preserved.data section compile time validation
Same as for .boot.data section make sure that .boot.preserved.data
sections of vmlinux and arch/s390/compressed/vmlinux match before
producing the compressed kernel image. Symbols presence, order and sizes
are cross-checked.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390: move ipl block to .boot.preserved.data section
.boot.preserved.data is a better fit for ipl block than .boot.data
which is discarded after init. Reusing .boot.preserved.data allows to
simplify code a little bit and avoid copying data from .boot.data to
persistent variables.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce .boot.preserve.data section which is similar to .boot.data and
"shared" between the decompressor code and the decompressed kernel. The
decompressor will store values in it, and copy over to the decompressed
image before starting it. This method allows to avoid using pre-defined
addresses and other hacks to pass values between those boot phases.
Unlike .boot.data section .boot.preserved.data is NOT a part of init data,
and hence will be preserved for the kernel life time.
Thomas Richter [Thu, 28 Mar 2019 10:21:47 +0000 (11:21 +0100)]
s390/cpum_cf: Add support for CPU-MF SVN 6
Add support for the CPU-Measurement Facility counter
second version number 6. This number is used to detect some
more counters in the crypto counter set and the extended
counter set.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Julian Wiedmann [Tue, 30 Oct 2018 07:21:27 +0000 (08:21 +0100)]
s390/qdio: clean up qdio_check_outbound_after_thinint()
This helper is not thinint-specific, qdio_get_next_buffers() also calls it
for non-thinint devices. So give it a more fitting name, and while at it
adjust its parameter.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Julian Wiedmann [Tue, 30 Oct 2018 07:19:54 +0000 (08:19 +0100)]
s390/qdio: clean up pci_out_supported()
pci_out_supported() currently takes a single queue as parameter, even
though Output IRQ support is a per-device feature. Adjust the parameter,
so that the macro can also be used in code paths with no access to a queue
struct. This allows us to remove the remaining open-coded checks for
QIB_AC_OUTBOUND_PCI_SUPPORTED.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/dasd: Fix capacity calculation for large volumes
The DASD driver incorrectly limits the maximum number of blocks of ECKD
DASD volumes to 32 bit numbers. Volumes with a capacity greater than
2^32-1 blocks are incorrectly recognized as smaller volumes.
This results in the following volume capacity limits depending on the
formatted block size:
The same problem occurs when a volume with more than 17895697 cylinders
is accessed in raw-track-access mode.
Fix this problem by adding an explicit type cast when calculating the
maximum number of blocks.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Thu, 28 Mar 2019 20:29:09 +0000 (13:29 -0700)]
Merge tag 'pci-v5.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:
- Clear level-triggered interrupts for the bandwidth notification
supported added for v5.1 (Alexandru Gagniuc)
- Clear bandwidth notification interrupts before enabling them (Lukas
Wunner)
- Report post-enumeration bandwidth changes only once for
multi-function devices (Lukas Wunner)"
* tag 'pci-v5.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/LINK: Deduplicate bandwidth reports for multi-function devices
PCI/LINK: Clear bandwidth notification interrupt before enabling it
PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked
David Howells [Wed, 27 Mar 2019 22:48:02 +0000 (22:48 +0000)]
afs: Fix StoreData op marshalling
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.
The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).
Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.
The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps. This can be tested by giving the following test program a
filename in an AFS directory:
Linus Torvalds [Thu, 28 Mar 2019 15:35:32 +0000 (08:35 -0700)]
Merge tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Improvements and bug fixes for 5.1-rc2:
- Fix early free of the channel program in vfio
- On AP device removal make sure that all messages are flushed with
the driver still attached that queued the message
- Limit brk randomization to 32MB to reduce the chance that the heap
of ld.so is placed after the main stack
- Add a rolling average for the steal time of a CPU, this will be
needed for KVM to decide when to do busy waiting
- Fix a warning in the CPU-MF code
- Add a notification handler for AP configuration change to react
faster to new AP devices"
* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix warning from check_processor_id
zcrypt: handle AP Info notification from CHSC SEI command
vfio: ccw: only free cp on final interrupt
s390/vtime: steal time exponential moving average
s390/zcrypt: revisit ap device remove procedure
s390: limit brk randomization to 32MB
Linus Torvalds [Thu, 28 Mar 2019 15:23:45 +0000 (08:23 -0700)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of minor fixes only for now
- fix for incorrect DMA channels on Renesas R-Car
- Broadcom bcm2835 error handling fixes
- Kconfig dependency fixes for bcm2835 and davinci
- CPU idle wakeup fix for i.MX6
- MMC regression on Tegra186
- fix incorrect phy settings on one imx board"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
ARM: dts: nomadik: Fix polarity of SPI CS
ARM: davinci: fix build failure with allnoconfig
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
arm64: bcm2835: Add missing dependency on MFD_CORE.
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
Thomas Richter [Mon, 18 Mar 2019 14:50:27 +0000 (15:50 +0100)]
s390/cpumf: Fix warning from check_processor_id
Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:
The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.
Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.
Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
Linus Torvalds [Tue, 26 Mar 2019 21:25:48 +0000 (14:25 -0700)]
Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning"
* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: fix uninitialized variable warning
pNFS/flexfiles: Fix layoutstats handling during read failovers
NFS: Fix a typo in nfs_init_timeout_values()
SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
NFSv4.1 don't free interrupted slot on open
NFS: fix mount/umount race in nlmclnt.
NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
Alakesh Haloi [Tue, 26 Mar 2019 02:00:01 +0000 (02:00 +0000)]
SUNRPC: fix uninitialized variable warning
Avoid following compiler warning on uninitialized variable
net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return read;
^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return ret < 0 ? ret : read;
~~~~~~~~~~~~~~^~~~~~
Ioana Ciornei [Mon, 25 Mar 2019 13:06:22 +0000 (13:06 +0000)]
dpaa2-eth: fix race condition with bql frame accounting
It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.
This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.
Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 25 Mar 2019 12:49:16 +0000 (13:49 +0100)]
chelsio: use BUG() instead of BUG_ON(1)
clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
condition is false [-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
return buf_size;
^~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
BUG_ON(1);
^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^
drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
int buf_size;
^
= 0
Use BUG() here to create simpler code that clang understands
correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 23 Mar 2019 23:21:03 +0000 (00:21 +0100)]
net: devlink: skip info_get op call if it is not defined in dumpit
In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.
Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 23 Mar 2019 22:18:46 +0000 (00:18 +0200)]
net: phy: bcm54xx: Encode link speed and activity into LEDs
Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).
This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.
The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.
So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.
While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.
Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>
While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.
Cc: stable@vger.kernel.org Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dt-bindings: net: dsa: qca8k: support internal mdio-bus
This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix assertion failure on fsync with NO_HOLES enabled
btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
btrfs: raid56: properly unmap parity page in finish_parity_scrub()
btrfs: don't report readahead errors and don't update statistics
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
btrfs: remove WARN_ON in log_dir_items
Btrfs: fix incorrect file size after shrinking truncate and fsync
Linus Torvalds [Tue, 26 Mar 2019 17:21:55 +0000 (10:21 -0700)]
Merge tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three small fixes:
- A fix to a double free in the histogram code
- Uninitialized variable fix
- Use NULL instead of zero fix and spelling fixes"
* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix warning using plain integer as NULL & spelling corrections
tracing: initialize variable in create_dyn_event()
tracing: Remove unnecessary var_ref destroy in track_data_destroy()
Hariprasad Kelam [Sat, 23 Mar 2019 18:35:23 +0000 (00:05 +0530)]
ftrace: Fix warning using plain integer as NULL & spelling corrections
Changed 0 --> NULL to avoid sparse warning
Corrected spelling mistakes reported by checkpatch.pl
Sparse warning below:
sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace
CHECK kernel/trace/ftrace.c
kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer
kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer
Tom Zanussi [Wed, 20 Mar 2019 17:53:33 +0000 (12:53 -0500)]
tracing: Remove unnecessary var_ref destroy in track_data_destroy()
Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to
destroy var_refs) centralized the destruction of all the var_refs
in one place so that other code didn't have to do it.
The track_data_destroy() added later ignored that and also destroyed
the track_data var_ref, causing a double-free error flagged by KASAN.
==================================================================
BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70
Read of size 8 at addr ffff888086df2210 by task bash/1694
Heiner Kallweit [Fri, 22 Mar 2019 19:00:20 +0000 (20:00 +0100)]
net: phy: don't clear BMCR in genphy_soft_reset
So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.
Lukas Wunner [Wed, 20 Mar 2019 11:05:30 +0000 (12:05 +0100)]
PCI/LINK: Deduplicate bandwidth reports for multi-function devices
If a multi-function device's bandwidth is already limited when it is
enumerated, a message is logged only for function 0. By contrast, when
downtraining occurs after enumeration, a message is logged for all
functions. That's because the former uses pcie_report_downtraining(),
whereas the latter uses __pcie_print_link_status() (which doesn't filter
functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU
(function 0) and an integrated HDA controller (function 1).
Avoid this incongruence by calling pcie_report_downtraining() in both
cases.
Lukas Wunner [Wed, 20 Mar 2019 11:05:30 +0000 (12:05 +0100)]
PCI/LINK: Clear bandwidth notification interrupt before enabling it
When booting a MacBookPro9,1, duplicate link downtraining messages are
logged for the devices directly attached to the two CPU-internal Root Ports
of the Core i7 3615QM: Once on device enumeration and once on enablement
of the bandwidth notification interrupt on the Root Ports.
Duplicate messages do not occur with Root Ports on the PCH and Downstream
Ports on the Thunderbolt controller: Only a single message is logged for
these, namely on device enumeration.
The reason for the duplicate messages is a stale interrupt in the Link
Status register of the 3615QM's internal Root Ports. Avoid by clearing the
interrupt before enabling it.
An alternative approach would be to clear the interrupt already on device
enumeration or to report link downtraining only if the speed has changed.
That way, link downtraining occurring between device enumeration and
enablement of the bandwidth notification interrupt could be caught.
However clearing stale interrupts before enabling them is a standard
operating procedure for any driver and keeping the two steps in one place
makes the code easier to follow.
Supid says:
"Due to the new device model daisy driver will now try to find the
parallel ports while trying to register its driver so that it can bind
with them. Now, since daisy driver is loaded while parport bus is
initialising the list of parport is still empty and it tries to load
the lowlevel driver, which has an alias set to parport_pc, now causes
a deadlock"
But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.
If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.
Jonathan Hunter [Mon, 25 Mar 2019 11:28:07 +0000 (12:28 +0100)]
arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...
mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state
For now disable CQE support for Tegra186 until this issue is resolved.
Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 25 Mar 2019 16:06:41 +0000 (17:06 +0100)]
Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
Arnd Bergmann [Mon, 25 Mar 2019 16:05:30 +0000 (17:05 +0100)]
Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
arm64: bcm2835: Add missing dependency on MFD_CORE.
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
Linus Walleij [Mon, 18 Mar 2019 15:31:22 +0000 (16:31 +0100)]
ARM: dts: nomadik: Fix polarity of SPI CS
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Jeff Layton [Mon, 25 Mar 2019 12:15:14 +0000 (08:15 -0400)]
locks: wake any locks blocked on request before deadlock check
Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.
While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.
This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.
We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975 Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Cc: stable@vger.kernel.org Reported-by: Andreas Schneider <asn@redhat.com> Signed-off-by: Neil Brown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
Daniel Borkmann [Sat, 23 Mar 2019 00:49:11 +0000 (01:49 +0100)]
bpf, libbpf: clarify bump in libbpf version info
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 23 Mar 2019 00:49:10 +0000 (01:49 +0100)]
bpf, libbpf: fix version info and add it to shared object
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
Linus Torvalds [Sun, 24 Mar 2019 20:41:37 +0000 (13:41 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for 5.1"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: prohibit fstrim in norecovery mode
ext4: cleanup bh release code in ext4_ind_remove_space()
ext4: brelse all indirect buffer in ext4_ind_remove_space()
ext4: report real fs size after failed resize
ext4: add missing brelse() in add_new_gdb_meta_bg()
ext4: remove useless ext4_pin_inode()
ext4: avoid panic during forced reboot
ext4: fix data corruption caused by unaligned direct AIO
ext4: fix NULL pointer dereference while journal is aborted
Linus Torvalds [Sun, 24 Mar 2019 18:42:10 +0000 (11:42 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
"Third more careful attempt for this set of fixes:
- Prevent a 32bit math overflow in the cpufreq code
- Fix a buffer overflow when scanning the cgroup2 cpu.max property
- A set of fixes for the NOHZ scheduler logic to prevent waking up
CPUs even if the capacity of the busy CPUs is sufficient along with
other tweaks optimizing the behaviour for asymmetric systems
(big/little)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Skip LLC NOHZ logic for asymmetric systems
sched/fair: Tune down misfit NOHZ kicks
sched/fair: Comment some nohz_balancer_kick() kick conditions
sched/core: Fix buffer overflow in cgroup2 property cpu.max
sched/cpufreq: Fix 32-bit math overflow
Linus Torvalds [Sun, 24 Mar 2019 18:16:27 +0000 (11:16 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"A larger set of perf updates.
Not all of them are strictly fixes, but that's solely the tip
maintainers fault as they let the timely -rc1 pull request fall
through the cracks for various reasons including travel. So I'm
sending this nevertheless because rebasing and distangling fixes and
updates would be a mess and risky as well. As of tomorrow, a strict
fixes separation is happening again. Sorry for the slip-up.
Kernel:
- Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
consumers of the mmap event get what they requested.
Tools:
- A larger set of updates to perf record/report/scripts vs. time
stamp handling
- More Python3 fixups
- A pile of memory leak plumbing
- perf BPF improvements and fixes
- Finalize the perf.data directory storage"
[ Note: the kernel part is strictly a fix, the updates are purely to
tooling - Linus ]
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf bpf: Show more BPF program info in print_bpf_prog_info()
perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
perf tools: Save bpf_prog_info and BTF of new BPF programs
perf evlist: Introduce side band thread
perf annotate: Enable annotation of BPF programs
perf build: Check what binutils's 'disassembler()' signature to use
perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
perf feature detection: Add -lopcodes to feature-libbfd
perf top: Add option --no-bpf-event
perf bpf: Save BTF information as headers to perf.data
perf bpf: Save BTF in a rbtree in perf_env
perf bpf: Save bpf_prog_info information as headers to perf.data
perf bpf: Save bpf_prog_info in a rbtree in perf_env
perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
tools lib bpf: Introduce bpf_program__get_prog_info_linear()
perf record: Replace option --bpf-event with --no-bpf-event
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
...
Linus Torvalds [Sun, 24 Mar 2019 18:12:27 +0000 (11:12 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Prevent potential NULL pointer dereferences in the HPET and HyperV
code
- Exclude the GART aperture from /proc/kcore to prevent kernel
crashes on access
- Use the correct macros for Cyrix I/O on Geode processors
- Remove yet another kernel address printk leak
- Announce microcode reload completion as requested by quite some
people. Microcode loading has become popular recently.
- Some 'Make Clang' happy fixlets
- A few cleanups for recently added code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/gart: Exclude GART aperture from kcore
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
x86/mm/pti: Make local symbols static
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/microcode: Announce reload operation's completion
x86/hyperv: Prevent potential NULL pointer dereference
x86/hpet: Prevent potential NULL pointer dereference
x86/lib: Fix indentation issue, remove extra tab
x86/boot: Restrict header scope to make Clang happy
x86/mm: Don't leak kernel addresses
x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
projects / mirror_ubuntu-hirsute-kernel.git / log