* remotes/huth-gitlab/tags/pull-request-2019-08-17:
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
tests: Run the iotests during "make check" again
block: fix NetBSD qemu-iotests failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 19 Aug 2019 11:32:15 +0000 (12:32 +0100)]
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
Pull request
Stable notes: patches one and two can be considered
for the next -stable release.
# gpg: Signature made Sat 17 Aug 2019 00:15:50 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
hw/ide/atapi: Use the ldst API
Revert "ide/ahci: Check for -ECANCELED in aio callbacks"
dma-helpers: ensure AIO callback is invoked after cancellation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 19 Aug 2019 09:55:03 +0000 (10:55 +0100)]
Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging
Pull request
Rebase notes:
011/36:[0003] [FC] 'block/backup: upgrade copy_bitmap to BdrvDirtyBitmap'
016/36:[----] [-C] 'iotests: Add virtio-scsi device helper'
017/36:[0002] [FC] 'iotests: add test 257 for bitmap-mode backups'
030/36:[0011] [FC] 'block/backup: teach TOP to never copy unallocated regions'
032/36:[0018] [FC] 'iotests/257: test traditional sync modes'
11: A new hbitmap call was added late in 4.1, changed to
bdrv_dirty_bitmap_next_zero.
16: Context-only (self.has_quit is new context in 040)
17: Removed 'auto' to follow upstream trends in iotest fashion
30: Handled explicitly on-list with R-B from Max.
32: Fix capitalization in test, as mentioned on-list.
# gpg: Signature made Sat 17 Aug 2019 00:12:13 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/bitmaps-pull-request: (36 commits)
tests/test-hbitmap: test next_zero and _next_dirty_area after truncate
block/backup: refactor write_flags
block/backup: deal with zero detection
qapi: add dirty-bitmaps to query-named-block-nodes result
iotests/257: test traditional sync modes
block/backup: support bitmap sync modes for non-bitmap backups
block/backup: teach TOP to never copy unallocated regions
block/backup: add backup_is_cluster_allocated
block/backup: centralize copy_bitmap initialization
block/backup: improve sync=bitmap work estimates
iotests/257: test API failures
block/backup: hoist bitmap check into QMP interface
iotests/257: Refactor backup helpers
iotests/257: add EmulatedBitmap class
iotests/257: add Pattern class
iotests: test bitmap moving inside 254
qapi: implement block-dirty-bitmap-remove transaction action
blockdev: reduce aio_context locked sections in bitmap add/remove
block/backup: loosen restriction on readonly bitmaps
iotests: add test 257 for bitmap-mode backups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Tue, 16 Jul 2019 09:30:35 +0000 (11:30 +0200)]
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
Since most iotests are now run during "make check" already, we do not
need to test them explicitly from the gitlab-ci.yml script anymore.
And while we're at it, add some of the new non-auto tests >= 246 instead.
Message-Id: <20190717111947.30356-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 12 Jul 2019 15:39:33 +0000 (17:39 +0200)]
tests: Run the iotests during "make check" again
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Paolo Bonzini [Thu, 25 Jul 2019 09:59:20 +0000 (11:59 +0200)]
block: fix NetBSD qemu-iotests failure
Opening a block device on NetBSD has an additional step compared to other OSes,
corresponding to raw_normalize_devicepath. The error message in that function
is slightly different from that in raw_open_common and this was causing spurious
failures in qemu-iotests. However, in general it is not important to know what
exact step was failing, for example in the qemu-iotests case the error message
contains the fairly unequivocal "No such file or directory" text from strerror.
We can thus fix the failures by standardizing on a single error message for
both raw_open_common and raw_normalize_devicepath; in fact, we can even
use error_setg_file_open to make sure the error message is the same as in
the rest of QEMU.
Message-Id: <20190725095920.28419-1-pbonzini@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
The big-endian load/store functions are already provided
by "qemu/bswap.h".
Avoid code duplication, use the generic API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190808130454.9930-1-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
It's not correct to just ignore an error code in a callback; we need to
handle that error and possible report failure to the guest so that they
don't wait indefinitely for an operation that will now never finish.
This ought to help cases reported by Nutanix where iSCSI returns a
legitimate -ECANCELED for certain operations which should be propagated
normally.
Reported-by: Shaju Abraham <shaju.abraham@nutanix.com> Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190729223605.7163-1-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Paolo Bonzini [Mon, 29 Jul 2019 21:34:16 +0000 (23:34 +0200)]
dma-helpers: ensure AIO callback is invoked after cancellation
dma_aio_cancel unschedules the BH if there is one, which corresponds
to the reschedule_dma case of dma_blk_cb. This can stall the DMA
permanently, because dma_complete will never get invoked and therefore
nobody will ever invoke the original AIO callback in dbs->common.cb.
Fix this by invoking the callback (which is ensured to happen after
a bdrv_aio_cancel_async, or done manually in the dbs->bh case), and
add assertions to check that the DMA state machine is indeed waiting
for dma_complete or reschedule_dma, but never both.
Reported-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190729213416.1972-1-pbonzini@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
tests/test-hbitmap: test next_zero and _next_dirty_area after truncate
Test that hbitmap_next_zero and hbitmap_next_dirty_area can find things
after old bitmap end.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190805164652.42409-1-vsementsov@virtuozzo.com Tested-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
write flags are constant, let's store it in BackupBlockJob instead of
recalculating. It also makes two boolean fields to be unused, so,
drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-4-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: support bitmap sync modes for non-bitmap backups
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: teach TOP to never copy unallocated regions
Presently, If sync=TOP is selected, we mark the entire bitmap as dirty.
In the write notifier handler, we dutifully copy out such regions.
Fix this in three parts:
1. Mark the bitmap as being initialized before the first yield.
2. After the first yield but before the backup loop, interrogate the
allocation status asynchronously and initialize the bitmap.
3. Teach the write notifier to interrogate allocation status if it is
invoked during bitmap initialization.
As an effect of this patch, the job progress for TOP backups
now behaves like this:
- total progress starts at bdrv_length.
- As allocation status is interrogated, total progress decreases.
- As blocks are copied, current progress increases.
Taken together, the floor and ceiling move to meet each other.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190716000117.25219-10-jsnow@redhat.com
[Remove ret = -ECANCELED change. --js]
[Squash in conflict resolution based on Max's patch --js]
Message-id: c8b0ab36-79c8-0b4b-3193-4e12ed8c848b@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: add backup_is_cluster_allocated
Modify bdrv_is_unallocated_range to utilize the pnum return from
bdrv_is_allocated, and in the process change the semantics from
"is unallocated" to "is allocated."
Optionally returns a full number of clusters that share the same
allocation status.
This will be used to carefully toggle bits in the bitmap for sync=top
initialization in the following commits.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Just a few housekeeping changes that keeps the following commit easier
to read; perform the initial copy_bitmap initialization in one place.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: improve sync=bitmap work estimates
When making backups based on bitmaps, the work estimate can be more
accurate. Update iotests to reflect the new strategy.
TOP work estimates are broken, but do not get worse with this commit.
That issue is addressed in the following commits instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
iotests/257: test API failures
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
block/backup: hoist bitmap check into QMP interface
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:55 +0000 (16:35 -0400)]
iotests/257: Refactor backup helpers
This test needs support for non-bitmap backups and missing or
unspecified bitmap sync modes, so rewrite the helpers to be a little
more generic.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests/257: add EmulatedBitmap class
Represent a bitmap with an object that we can mark and clear bits in.
This makes it easier to manage partial writes when we don't write a
full group's worth of patterns before an error.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests/257: add Pattern class
Just kidding, this is easier to manage with a full class instead of a
namedtuple.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Test persistent bitmap copying with and without removal of original
bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-4-jsnow@redhat.com
[Edited comment "bitmap1" --> "bitmap2" as per review. --js] Signed-off-by: John Snow <jsnow@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js] Signed-off-by: John Snow <jsnow@redhat.com>
blockdev: reduce aio_context locked sections in bitmap add/remove
Commit 0a6c86d024c52 returned these locks back to add/remove
functionality, to protect from intersection of persistent bitmap
related IO with other IO. But other bitmap-related functions called
here are unrelated to the problem, and there are no needs to keep these
calls inside critical sections.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
block/backup: loosen restriction on readonly bitmaps
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: add test 257 for bitmap-mode backups
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-18-jsnow@redhat.com
[Removed 'auto' group, as per new testing config guidelines --js] Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: Add virtio-scsi device helper
Seems that it comes up enough.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:54 +0000 (16:35 -0400)]
iotests: teach FilePath to produce multiple paths
Use "FilePaths" instead of "FilePath" to request multiple files be
cleaned up after we leave that object's scope.
This is not crucial; but it saves a little typing.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-16-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
iotests: teach run_job to cancel pending jobs
run_job can cancel pending jobs to simulate failure. This lets us use
the pending callback to issue test commands while the job is open, but
then still have the job fail in the end.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-15-jsnow@redhat.com
[Maintainer edit: Merge conflict resolution in run_job] Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
iotests: add testing shim for script-style python tests
Because the new-style python tests don't use the iotests.main() test
launcher, we don't turn on the debugger logging for these scripts
when invoked via ./check -d.
Refactor the launcher shim into new and old style shims so that they
share environmental configuration.
Two cleanup notes: debug was not actually used as a global, and there
was no reason to create a class in an inner scope just to achieve
default variables; we can simply create an instance of the runner with
the values we want instead.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: add 'always' bitmap sync policy
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: upgrade copy_bitmap to BdrvDirtyBitmap
This simplifies some interface matters; namely the initialization and
(later) merging the manifest back into the sync_bitmap if it was
provided.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/dirty-bitmap: add bdrv_dirty_bitmap_get
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
hbitmap: enable merging across granularities
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
hbitmap: Fix merge when b is empty, and result is not an alias of a
Nobody calls the function like this currently, but we neither prohibit
or cope with this behavior. I decided to make the function cope with it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:53 +0000 (16:35 -0400)]
block/backup: add 'never' policy to bitmap sync mode
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
block/backup: Add mirror sync mode 'bitmap'
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
qapi: add BitmapSyncMode enum
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.
I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.
The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
blockdev-backup: utilize do_backup_common
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
drive-backup: create do_backup_common
Create a common core that comprises the actual meat of what the backup API
boundary needs to do, and then switch drive-backup to use it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Mon, 29 Jul 2019 20:35:52 +0000 (16:35 -0400)]
qapi/block-core: Introduce BackupCommon
drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.
I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.
Where documentation was not identical, use the most up-to-date version.
For "speed", use Blockdev-Backup's version. For "sync", use
Drive-Backup's version.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
[Maintainer edit: modified commit message. --js] Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Peter Maydell [Fri, 16 Aug 2019 16:21:39 +0000 (17:21 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190816' into staging
target-arm queue:
* target/arm: generate a custom MIDR for -cpu max
* hw/misc/zynq_slcr: refactor to use standard register definition
* Set ENET_BD_BDU in I.MX FEC controller
* target/arm: Fix routing of singlestep exceptions
* refactor a32/t32 decoder handling of PC
* minor optimisations/cleanups of some a32/t32 codegen
* target/arm/cpu64: Ensure kvm really supports aarch64=off
* target/arm/cpu: Ensure we can use the pmu with kvm
* target/arm: Minor cleanups preparatory to KVM SVE support
* remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits)
target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word
target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR
target/arm: Use tcg_gen_rotri_i32 for gen_swap_half
target/arm: Use ror32 instead of open-coding the operation
target/arm: Remove redundant shift tests
target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB
target/arm: Use tcg_gen_extract_i32 for shifter_out_im
target/arm/kvm64: Move the get/put of fpsimd registers out
target/arm/kvm64: Fix error returns
target/arm/cpu: Use div-round-up to determine predicate register array size
target/arm/helper: zcr: Add build bug next to value range assumption
target/arm/cpu: Ensure we can use the pmu with kvm
target/arm/cpu64: Ensure kvm really supports aarch64=off
target/arm: Remove helper_double_saturate
target/arm: Use unallocated_encoding for aarch32
target/arm: Remove offset argument to gen_exception_bkpt_insn
target/arm: Replace offset with pc in gen_exception_internal_insn
target/arm: Replace offset with pc in gen_exception_insn
target/arm: Replace s->pc with s->base.pc_next
target/arm: Remove redundant s->pc & ~1
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 15:43:46 +0000 (16:43 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests
# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 14:53:37 +0000 (15:53 +0100)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging
nbd patches for 2019-08-15
- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect
# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-08-15:
block/nbd: refactor nbd connection parameters
block/nbd: add cmdline and qapi parameter reconnect-delay
block/nbd: move from quit to state
block/nbd: use non-blocking io channel for nbd negotiation
block/nbd: split connection_co start out of nbd_client_connect
nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
block/stream: use BDRV_REQ_PREFETCH
block: implement BDRV_REQ_PREFETCH
qapi: Add InetSocketAddress member keep-alive
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 13:53:43 +0000 (14:53 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word
Separate shift + extract low will result in one extra insn
for hosts like RISC-V, MIPS, and Sparc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of the inputs to these instructions are 32-bits. Rather than
extend each input to 64-bits and then extract the high 32-bits of
the output, use tcg_gen_muls2_i32 and other 32-bit generator functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_rotri_i32 for gen_swap_half
Rotate is the more compact and obvious way to swap 16-bit
elements of a 32-bit word.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use ror32 instead of open-coding the operation
The helper function is more documentary, and also already
handles the case of rotate by zero.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate shift generator functions already test for,
and eliminate, the case of a shift by zero.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB
Use deposit as the composit operation to merge the
bits from the two inputs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_extract_i32 for shifter_out_im
Extract is a compact combination of shift + and.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190808202616.13782-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Fri, 2 Aug 2019 12:25:35 +0000 (14:25 +0200)]
target/arm/kvm64: Move the get/put of fpsimd registers out
Move the getting/putting of the fpsimd registers out of
kvm_arch_get/put_registers() into their own helper functions
to prepare for alternatively getting/putting SVE registers.
No functional change.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Fri, 2 Aug 2019 12:25:34 +0000 (14:25 +0200)]
target/arm/kvm64: Fix error returns
A couple return -EINVAL's forgot their '-'s.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Fri, 2 Aug 2019 12:25:31 +0000 (14:25 +0200)]
target/arm/cpu: Use div-round-up to determine predicate register array size
Unless we're guaranteed to always increase ARM_MAX_VQ by a multiple of
four, then we should use DIV_ROUND_UP to ensure we get an appropriate
array size.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Fri, 2 Aug 2019 12:25:30 +0000 (14:25 +0200)]
target/arm/helper: zcr: Add build bug next to value range assumption
The current implementation of ZCR_ELx matches the architecture, only
implementing the lower four bits, with the rest RAZ/WI. This puts
a strict limit on ARM_MAX_VQ of 16. Make sure we don't let ARM_MAX_VQ
grow without a corresponding update here.
Suggested-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Fri, 2 Aug 2019 12:25:27 +0000 (14:25 +0200)]
target/arm/cpu: Ensure we can use the pmu with kvm
We first convert the pmu property from a static property to one with
its own accessors. Then we use the set accessor to check if the PMU is
supported when using KVM. Indeed a 32-bit KVM host does not support
the PMU, so this check will catch an attempt to use it at property-set
time.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If -cpu <cpu>,aarch64=off is used then KVM must also be used, and it
and the host must support running the vcpu in 32-bit mode. Also, if
-cpu <cpu>,aarch64=on is used, then it doesn't matter if kvm is
enabled or not.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace x = double_saturate(y) with x = add_saturate(y, y).
There is no need for a separate more specialized helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Promote this function from aarch64 to fully general use.
Use it to unify the code sequences for generating illegal
opcode exceptions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Remove offset argument to gen_exception_bkpt_insn
Unlike the other more generic gen_exception{,_internal}_insn
interfaces, breakpoints always refer to the current instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Replace offset with pc in gen_exception_internal_insn
The offset is variable depending on the instruction set.
Passing in the actual value is clearer in intent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Replace offset with pc in gen_exception_insn
The offset is variable depending on the instruction set, whereas
we have stored values for the current pc and the next pc. Passing
in the actual value is clearer in intent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must update s->base.pc_next when we return from the translate_insn
hook to the main translator loop. By incrementing s->base.pc_next
immediately after reading the insn word, "pc_next" contains the address
of the next instruction throughout translation.
All remaining uses of s->pc are referencing the address of the next insn,
so this is now a simple global replacement. Remove the "s->pc" field.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The thumb bit has already been removed from s->pc, and is always even.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a common routine for the places that require ALIGN(PC, 4)
as the base address as opposed to plain PC. The two are always
the same for A32, but the difference is meaningful for thumb mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently have 3 different ways of computing the architectural
value of "PC" as seen in the ARM ARM.
The value of s->pc has been incremented past the current insn,
but that is all. Thus for a32, PC = s->pc + 4; for t32, PC = s->pc;
for t16, PC = s->pc + 2. These differing computations make it
impossible at present to unify the various code paths.
With the newly introduced s->pc_curr, we can compute the correct
value for all cases, using the formula given in the ARM ARM.
This changes the behaviour for load_reg() and load_reg_var()
when called with reg==15 from a 32-bit Thumb instruction:
previously they would have returned the incorrect value
of pc_curr + 6, and now they will return the architecturally
correct value of PC, which is pc_curr + 4. This will not
affect well-behaved guest software, because all of the places
we call these functions from T32 code are instructions where
using r15 is UNPREDICTABLE. Using the architectural PC value
here is more consistent with the T16 and A32 behaviour.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-4-richard.henderson@linaro.org
[PMM: added commit message note about UNPREDICTABLE T32 cases] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new field to retain the address of the instruction currently
being translated. The 32-bit uses are all within subroutines used
by a32 and t32. This will become less obvious when t16 support is
merged with a32+t32, and having a clear definition will help.
Convert aarch64 as well for consistency. Note that there is one
instance of a pre-assert fprintf that used the wrong value for the
address of the current instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is used in two different contexts, and it will be
clearer if the function is given the address to which it applies.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190807045335.1361-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 15 Aug 2019 08:46:42 +0000 (09:46 +0100)]
target/arm: Fix routing of singlestep exceptions
When generating an architectural single-step exception we were
routing it to the "default exception level", which is to say
the same exception level we execute at except that EL0 exceptions
go to EL1. This is incorrect because the debug exception level
can be configured by the guest for situations such as single
stepping of EL0 and EL1 code by EL2.
We have to track the target debug exception level in the TB
flags, because it is dependent on CPU state like HCR_EL2.TGE
and MDCR_EL2.TDE. (That we were previously calling the
arm_debug_target_el() function to determine dc->ss_same_el
is itself a bug, though one that would only have manifested
as incorrect syndrome information.) Since we are out of TB
flag bits unless we want to expand into the cs_base field,
we share some bits with the M-profile only HANDLER and
STACKCHECK bits, since only A-profile has this singlestep.
Fixes: https://bugs.launchpad.net/qemu/+bug/1838913 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190805130952.4415-3-peter.maydell@linaro.org
Peter Maydell [Thu, 15 Aug 2019 08:46:42 +0000 (09:46 +0100)]
target/arm: Factor out 'generate singlestep exception' function
Factor out code to 'generate a singlestep exception', which is
currently repeated in four places.
To do this we need to also pull the identical copies of the
gen-exception() function out of translate-a64.c and translate.c
into translate.h.
(There is a bug in the code: we're taking the exception to the wrong
target EL. This will be simpler to fix if there's only one place to
do it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190805130952.4415-2-peter.maydell@linaro.org
Aaron Hill [Thu, 15 Aug 2019 08:46:42 +0000 (09:46 +0100)]
Set ENET_BD_BDU in I.MX FEC controller
This commit properly sets the ENET_BD_BDU flag once the emulated FEC controller
has finished processing the last descriptor. This is done for both transmit
and receive descriptors.
This allows the QNX 7.0.0 BSP for the Sabrelite board (which can be
found at http://blackberry.qnx.com/en/developers/bsp) to properly
control the FEC. Without this patch, the BSP ethernet driver will never
re-use FEC descriptors, as the unset ENET_BD_BDU flag will cause
it to believe that the descriptors are still in use by the NIC.
Note that Linux does not appear to use this field at all, and is
unaffected by this patch.
Without this patch, QNX will think that the NIC is still processing its
transaction descriptors, and won't send any more data over the network.
For reference:
On page 1192 of the I.MX 6DQ reference manual revision (Rev. 5, 06/2018),
which can be found at https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-6-processors/i.mx-6quad-processors-high-performance-3d-graphics-hd-video-arm-cortex-a9-core:i.MX6Q?&tab=Documentation_Tab&linkline=Application-Note
the 'BDU' field is described as follows for the 'Enhanced transmit
buffer descriptor':
'Last buffer descriptor update done. Indicates that the last BD data has been updated by
uDMA. This field is written by the user (=0) and uDMA (=1).'
The same description is used for the receive buffer descriptor.
Signed-off-by: Aaron Hill <aa1ronham@gmail.com>
Message-id: 20190805142417.10433-1-aaron.hill@alertinnovation.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Thu, 15 Aug 2019 08:46:41 +0000 (09:46 +0100)]
target/arm: generate a custom MIDR for -cpu max
While most features are now detected by probing the ID_* registers
kernels can (and do) use MIDR_EL1 for working out of they have to
apply errata. This can trip up warnings in the kernel as it tries to
work out if it should apply workarounds to features that don't
actually exist in the reported CPU type.
Avoid this problem by synthesising our own MIDR value.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190726113950.7499-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 12:58:41 +0000 (13:58 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-08-15' into staging
- Fix for ctrl queue in the virtio-net QOS driver
- Improve Valgrind reports in the tests that use the null-co driver
- Get rid of global_qtest related code in libqtest and libqos
* remotes/huth-gitlab/tags/pull-request-2019-08-15:
tests/libqtest: Make qmp_assert_success() independent from global_qtest
tests/libqtest: Make qtest_qmp_device_add/del independent from global_qtest
tests/libqtest: Clean up qtest_cb_for_every_machine() wrt global_qtest
tests/libqtest: Remove unused function hmp()
tests/libqos: Make virtio-pci code independent from global_qtest
tests/libqos: Make generic virtio code independent from global_qtest
tests: Set read-zeroes on for null-co driver
libqos: Account for the ctrl queue in virtio-net
qtest: Rename qtest.c:qtest_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
hw/hw.h used to include headers hardware emulation "usually" needs.
The previous commits removed all but one of them, to good effect.
Only qom/object.h is left. Remove that one, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-18-armbru@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration: Move the VMStateDescription typedef to typedefs.h
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
ide: Include hw/ide/internal a bit less outside hw/ide/
According to hw/ide/internal's file comment, only files in hw/ide/ are
supposed to include it. Drag reality slightly closer to supposition.
Three includes outside hw/ide remain: hw/arm/sbsa-ref.c,
include/hw/ide/pci.h, and include/hw/misc/macio/macio.h. Turns out
board code needs ide-internal.h to wire up IDE stuff. More cleanup is
needed. Left for another day.
Cc: John Snow <jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-11-armbru@redhat.com>
projects / mirror_qemu.git / log