memory-device: add and use memory_device_get_region_size()
We will factor out get_memory_region() from pc-dimm to memory device code
soon. Once that is done, get_region_size() can be implemented
generically and essentially be replaced by
memory_device_get_region_size (and work only on get_memory_region()).
We have some users of get_memory_region() (spapr and pc-dimm code) that are
only interested in the size. So let's rework them to use
memory_device_get_region_size() first, then we can factor out
get_memory_region() and eventually remove get_region_size() without
touching the same code multiple times.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-10-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some architectures might support memory devices, while they don't
support DIMM/NVDIMM. So let's
- Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE
- Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM
CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE.
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
memory-device: use memory device terminology in error messages
While we rephrased most error messages, we missed these.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-6-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
memory-device: fix error message when hinted address is too small
The "at" should actually be a "before".
if (new_addr < address_space_start)
-> "can't add memory ... before... $address_space_start"
So it looks similar to the other check
} else if ((new_addr + size) > address_space_end)
-> "can't add memory ... beyond..."
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-3-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hw/sparc64/niagara: Model the I/O Bridge with the 'unimplemented_device'
Since the I/O Bridge device is not implemented, Use the
TYPE_UNIMPLEMENTED_DEVICE which suits better: if the user
asks for 'unimp' warnings via the -d option then all accesses
will generate logging.
Igor Mammedov [Thu, 13 Sep 2018 11:06:02 +0000 (13:06 +0200)]
vl:c: make sure that sockets are calculated correctly in '-smp X' case
commit
(5cdc9b76e3 vl.c: Remove dead assignment)
removed sockets calculation when 'sockets' weren't provided on CLI
since there wasn't any users for it back then. Exiting checks
are neither reachable
} else if (sockets * cores * threads < cpus) {
or nor triggerable
if (sockets * cores * threads > max_cpus)
so we weren't noticing wrong topology since then, since users
recalculate sockets adhoc on their own.
However with deprecation check it becomes noticable, for example
-smp 2
will start printing warning:
"warning: Invalid CPU topology deprecated: sockets (1) * cores (1) * threads (1) != maxcpus (2)"
calculating sockets if they weren't specified.
Fix it by returning back sockets calculation if it's omitted on CLI.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1536836762-273036-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Thu, 13 Sep 2018 11:06:01 +0000 (13:06 +0200)]
vl.c deprecate incorrect CPUs topology
-smp [cpus],sockets/cores/threads[,maxcpus] should describe topology
so that total number of logical CPUs [sockets * cores * threads]
would be equal to [maxcpus], however historically we didn't have
such check in QEMU and it is possible to start VM with an invalid
topology.
Deprecate invalid options combination so we can make sure that
the topology VM started with is always correct in the future.
Users with an invalid sockets/cores/threads/maxcpus values should
fix their CLI to make sure that
[sockets * cores * threads] == [maxcpus]
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1536836762-273036-2-git-send-email-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: squashed unit test fix]
Message-Id: <20181019215345.521d58d7@igors-macbook-pro.local> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Tue, 23 Oct 2018 16:20:23 +0000 (17:20 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Fri 19 Oct 2018 14:42:35 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: require nettle >= 2.7.1 for building QEMU
crypto: require libgcrypt >= 1.5.0 for building QEMU
crypto: require gnutls >= 3.1.18 for building QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In several places we use assert(FEATURE), and assume that if FEATURE
is disabled, all following code is removed as unreachable. Which allows
us to compile-out functions that are only present with FEATURE, and
have a link-time failure if the functions remain used.
MinGW does not mark its internal function _assert() as noreturn, so the
compiler cannot see when code is unreachable, which leads to link errors
for this host that are not present elsewhere.
The current build-time failure concerns 62823083b8a2, but I remember
having seen this same error before. Fix it once and for all for MinGW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181022181623.8810-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When user provides a long domainname or hostname that doesn't fit in the
DHCP packet, we mustn't overflow the response packet buffer. Instead,
report errors, following the g_warning() in the slirp->vdnssearch
branch.
Also check the strlen against 256 when initializing slirp, which limit
is also from the protocol where one byte represents the string length.
This gives an early error before the warning which is harder to notice
or diagnose.
Reported-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user: Implement special usbfs ioctls.
linux-user: Define ordinary usbfs ioctls.
linux-user: Check for Linux USBFS in configure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/tags/for-upstream: (47 commits)
replay: pass raw icount value to replay_save_clock
target/i386: kvm: just return after migrate_add_blocker failed
hyperv_testdev: add SynIC message and event testmodes
hyperv: process POST_MESSAGE hypercall
hyperv: add support for KVM_HYPERV_EVENTFD
hyperv: process SIGNAL_EVENT hypercall
hyperv: add synic event flag signaling
hyperv: add synic message delivery
hyperv: make overlay pages for SynIC
hyperv: only add SynIC in compatible configurations
hyperv: qom-ify SynIC
hyperv:synic: split capability testing and setting
i386: add hyperv-stub for CONFIG_HYPERV=n
default-configs: collect CONFIG_HYPERV* in hyperv.mak
hyperv: factor out arch-independent API into hw/hyperv
hyperv: make hyperv_vp_index inline
hyperv: split hyperv-proto.h into x86 and arch-independent parts
hyperv: rename kvm_hv_sint_route_set_sint
hyperv: make HvSintRoute reference-counted
hyperv: address HvSintRoute by X86CPU pointer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 19 Oct 2018 15:17:32 +0000 (16:17 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181018' into staging
Queued tcg patches.
# gpg: Signature made Fri 19 Oct 2018 07:03:20 BST
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20181018: (21 commits)
cputlb: read CPUTLBEntry.addr_write atomically
target/s390x: Check HAVE_ATOMIC128 and HAVE_CMPXCHG128 at translate
target/s390x: Skip wout, cout helpers if op helper does not return
target/s390x: Split do_cdsg, do_lpq, do_stpq
target/s390x: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
target/arm: Check HAVE_CMPXCHG128 at translate time
target/arm: Convert to HAVE_CMPXCHG128
target/i386: Convert to HAVE_CMPXCHG128
tcg: Split CONFIG_ATOMIC128
tcg: Add tlb_index and tlb_entry helpers
cputlb: serialize tlb updates with env->tlb_lock
cputlb: fix assert_cpu_is_self macro
exec: introduce tlb_init
target/unicore32: remove tlb_flush from uc32_init_fn
target/alpha: remove tlb_flush from alpha_cpu_initfn
tcg: distribute tcg_time into TCG contexts
tcg: plug holes in struct TCGProfile
tcg: fix use of uninitialized variable under CONFIG_PROFILER
tcg: access cpu->icount_decr.u16.high with atomics
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 19 Oct 2018 14:30:40 +0000 (15:30 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 19 Oct 2018 04:16:03 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (26 commits)
qemu-options: Fix bad "macaddr" property in the documentation
e1000: indicate dropped packets in HW counters
net: ignore packet size greater than INT_MAX
pcnet: fix possible buffer overflow
rtl8139: fix possible out of bound access
ne2000: fix possible out of bound access in ne2000_receive
clean up callback when del virtqueue
docs: Add COLO status diagram to COLO-FT.txt
COLO: quick failover process by kick COLO thread
COLO: notify net filters about checkpoint/failover event
filter-rewriter: handle checkpoint and failover event
filter: Add handle_event method for NetFilterClass
COLO: flush host dirty ram from cache
savevm: split the process of different stages for loadvm/savevm
qapi: Add new command to query colo status
qapi/migration.json: Rename COLO unknown mode to none mode.
qmp event: Add COLO_EXIT event to notify users while exited COLO
COLO: Flush memory data from ram cache
ram/COLO: Record the dirty pages that SVM received
COLO: Load dirty pages into SVM's RAM cache firstly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
error: Drop bogus "use error_setg() instead" admonitions
Commit 97f40301f1d "error: Functions to report warnings and
informational messages" copied the "use error_setg() instead"
admonition from the error reporting functions to new functions even
though it doesn't actually apply there. Drop it. Also drop it from
vreport(), where it doesn't apply anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181019123923.26649-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
vpc_open() merely prints a warning when it finds a bad header
checksum. Turn that into a hard error.
Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181017082702.5581-39-armbru@redhat.com>
[Error message capitalized for local consistency] Reviewed-by: Kevin Wolf <kwolf@redhat.com>
block: Clean up bdrv_img_create()'s error reporting
bdrv_img_create() takes an Error ** argument and uses it in the
conventional way, except for one place: when qemu_opts_do_parse()
fails, it first reports its error to stderr or the HMP monitor with
error_report_err(), then error_setg()'s a generic error.
When the caller reports that second error similarly, this produces two
consecutive error messages on stderr or the HMP monitor.
When the caller does something else with it, such as send it via QMP,
the first error still goes to stderr or the HMP monitor. Fortunately,
no such caller exists.
Simply use the first error as is. Update expected output of
qemu-iotest 049 accordingly.
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-37-armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
main() checks for parse_name() failure even though it can't actually
fail. That's okay. Simplify it to check by passing &error_fatal,
like the other users of qemu_opts_foreach().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-36-armbru@redhat.com>
Calling error_report() from within a function that takes an Error **
argument is suspicious. drive_new() calls error_report() even though
it can run within drive_init_func(), which takes an Error ** argument.
drive_init_func()'s caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway:
* Convert drive_new() to Error
* Update add_init_drive() to report the error received from
drive_new()
* Make main() pass &error_fatal through qemu_opts_foreach(),
drive_init_func() to drive_new()
* Make default_drive() pass &error_abort through qemu_opts_foreach(),
drive_init_func() to drive_new()
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-34-armbru@redhat.com>
vl: Assert drive_new() does not fail in default_drive()
If creating (empty) default drives fails, it's a bug. Therefore,
assert() is more appropriate than exit(1).
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20181017082702.5581-33-armbru@redhat.com>
fsdev: Clean up error reporting in qemu_fsdev_add()
Calling error_report() from within a function that takes an Error **
argument is suspicious. qemu_fsdev_add() does that, and its caller
fsdev_init_func() then fails without setting an error. Its caller
main(), via qemu_opts_foreach(), is fine with it, but clean it up
anyway.
Cc: Greg Kurz <groug@kaod.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <20181017082702.5581-32-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. add_channel() does that, and then exit()s. Its caller
main(), via qemu_opts_foreach(), is fine with it, but clean it up
anyway.
tpm: Clean up error reporting in tpm_init_tpmdev()
Calling error_report() in a function that takes an Error ** argument
is suspicious. tpm_init_tpmdev() does that, and then fails without
setting an error. Its caller main(), via tpm_init() and
qemu_opts_foreach(), is fine with it, but clean it up anyway.
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20181017082702.5581-30-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_numa() does that, and then fails without setting
an error. Its caller main(), via qemu_opts_foreach(), is fine with
it, but clean it up anyway.
Calling error_report() in a function that takes an Error ** argument
is suspicious. vnc_init_func() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
While there, drop a "Failed to start VNC server: " error message
prefix that doesn't really add value.
Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-28-armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
ui/keymaps: Fix handling of erroneous include files
While errors in the keyboard layout named with -k are fatal, errors in
included files are reported, but otherwise ignored:
$ cat worst
include bad
include worse
$ ls -l bad worse
ls: cannot access 'bad': No such file or directory
ls: cannot access 'worse': No such file or directory
$ qemu-system-x86_64 -nodefaults -S -monitor stdio -display vnc=:0 -k bad
QEMU 3.0.50 monitor - type 'help' for more information
(qemu) Could not read keymap file: 'bad'
$ qemu-system-x86_64 -nodefaults -S -monitor stdio -display vnc=:0 -k worst
QEMU 3.0.50 monitor - type 'help' for more information
(qemu) Could not read keymap file: 'bad'
Could not read keymap file: 'worse'
Fix that.
Note that parse_keyboard_layout() allocates the keymap, except when
it's parsing an include file. To keep error handling simple, move the
memory management to its caller init_keyboard_layout().
vl: Clean up error reporting in device_init_func()
Calling error_report() in a function that takes an Error ** argument
is suspicious. device_init_func() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-25-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_fw_cfg() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-24-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. mon_init_func() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-23-armbru@redhat.com>
vl: Clean up error reporting in machine_set_property()
Calling error_report() in a function that takes an Error ** argument
is suspicious. machine_set_property() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-22-armbru@redhat.com>
vl: Clean up error reporting in chardev_init_func()
Calling error_report() in a function that takes an Error ** argument
is suspicious. chardev_init_func() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-21-armbru@redhat.com>
qom: Clean up error reporting in user_creatable_add_opts_foreach()
Calling error_report() in a function that takes an Error ** argument
is suspicious. user_creatable_add_opts_foreach() does that, and then
fails without setting an error. Its caller main(), via
qemu_opts_foreach(), is fine with it, but clean it up anyway.
Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-20-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_add_fd() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
Also change call of cleanup_add_fd(), which can't fail, for symmetry.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-19-armbru@redhat.com>
seccomp: Clean up error reporting in parse_sandbox()
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_sandbox() does that, and then fails without
setting an error. Its caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway.
The conversion of "xen-pci-passthrough" to realize() (commit 5a11d0f7549, v2.6.0) neglected to convert the xen_pt_config_init()
error path. If xen_pt_config_init() fails, xen_pt_realize() reports
the error, then returns success without completing its job. I don't
know the exact impact, but it can't be good.
Belatedly convert the error path.
Fixes: 5a11d0f7549e24a10e178a9dc8ff5e698031d9a6 Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20181017082702.5581-17-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. parse_numa_node() does that, and then exit()s. It
also passes &error_fatal to machine_set_cpu_numa_node(). Both wrong.
Attempting to configure numa when the machine doesn't support it kills
the VM:
$ qemu-system-x86_64 -nodefaults -S -display none -M none -preconfig -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 0, "major": 3}, "package": "v3.0.0-837-gc5e4e49258"}, "capabilities": []}}
{"execute": "qmp_capabilities"}
{"return": {}}
{"execute": "set-numa-node", "arguments": {"type": "node"}}
NUMA is not supported by this machine-type
$ echo $?
1
Messed up when commit 64c2a8f6d3f and 7c88e65d9e9 (v2.10.0) added
incorrect error handling right next to correct examples. Latent bug
until commit f3be67812c2 (v3.0.0) made it accessible via QMP. Fairly
harmless in practice, because it's limited to RUN_STATE_PRECONFIG.
The fix is obvious: replace error_report(); exit() by error_setg();
return.
This affects parse_numa_node()'s other caller
numa_complete_configuration(): since it ignores errors, the "NUMA is
not supported by this machine-type" is now ignored, too. But that
error is as unexpected there as any other. Change it to abort on
error instead.
Fixes: f3be67812c226162f86ce92634bd913714445420 Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181017082702.5581-16-armbru@redhat.com>
net/socket: Fix invalid socket type error handling
Calling error_report() in a function that takes an Error ** argument
is suspicious. net_socket_fd_init() does that, and then fails without
setting an error. Wrong. I didn't analyze how exactly this can
break. A caller that reports the error on failure would crash.
Broken when commit c37f0bb1d0d (v2.11.0) converted the function to
Error. Fix by calling error_setg() instead of error_report().
Fixes: c37f0bb1d0d24e3a6b5f4659bb305913dcb798a6 Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-15-armbru@redhat.com>
When -netdev l2tpv3 fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev l2tpv3,id=foo,src=,dst=,txsession=1
qemu-system-x86_64: -netdev l2tpv3,id=foo,src=,dst=,txsession=1: l2tpv3_open : could not resolve src, errno = Name or service not known
qemu-system-x86_64: Device 'l2tpv3' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the second one becomes the error reply, and the
first one goes to stderr.
Convert net_init_tap() to Error. This suppresses the unwanted second
message, and makes the specific error the QMP error reply.
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-14-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. save_snapshot() and load_snapshot() do that, and then
fail without setting an error. Wrong. The HMP commands survive this
unscathed, since hmp_handle_error() does nothing when no error has
been set. Callers main() (on behalf of -loadvm) and
replay_vmstate_init() crash, but I'm not sure the error is possible
there.
Screwed up when commit 377b21ccea1 (v2.12.0) added incorrect error
handling right next to correct examples. Fix by calling error_setg()
instead of error_report().
Fixes: 377b21ccea1755a8b0dae822c29567c58dda6939 Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-13-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. smbios_entry_add() does that, and then exit()s. It
also passes &error_fatal to qemu_opts_validate(). Both wrong, but
currently harmless, as its only caller passes &error_fatal. Messed up
in commit 1007a37e208. Clean it up.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181017082702.5581-12-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. ioapic_realize() does that, and then exit()s.
Currently mostly harmless, as the device cannot be hot-plugged.
Fixes: 20fd4b7b6d9282fe0cb83601f1821f31bd257458 Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-11-armbru@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. pc.c's pc_machine_set_nvdimm_persistence() does that,
and then exit()s. Wrong. Attempting to set machine property
nvdimm-persistence to a bad value instantly kills the VM:
Calling error_report() in a function that takes an Error ** argument
is suspicious. 9p-handle.c's handle_parse_opts() does that, and then
fails without setting an error. Wrong. Its caller crashes when it
tries to report the error:
Screwed up when commit 91cda4e8f37 (v2.12.0) converted the function to
Error. Fix by calling error_setg() instead of error_report().
Fixes: 91cda4e8f372602795e3a2f4bd2e3adaf9f82255 Cc: Greg Kurz <groug@kaod.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-9-armbru@redhat.com>
vfio: Clean up error reporting after previous commit
The previous commit changed vfio's warning messages from
vfio warning: DEV-NAME: Could not frobnicate
to
warning: vfio DEV-NAME: Could not frobnicate
To match this change, change error messages from
vfio error: DEV-NAME: On fire
to
vfio DEV-NAME: On fire
Note the loss of "error". If we think marking error messages that way
is a good idea, we should mark *all* error messages, i.e. make
error_report() print it.
Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20181017082702.5581-7-armbru@redhat.com>
vfio: Use warn_report() & friends to report warnings
The vfio code reports warnings like
error_report(WARN_PREFIX "Could not frobnicate", DEV-NAME);
where WARN_PREFIX is defined so the message comes out as
vfio warning: DEV-NAME: Could not frobnicate
This usage predates the introduction of warn_report() & friends in
commit 97f40301f1d. It's time to convert to that interface. Since
these functions already prefix the message with "warning: ", replace
WARN_PREFIX by VFIO_MSG_PREFIX, so the messages come out like
warning: vfio DEV-NAME: Could not frobnicate
The next commit will replace ERR_PREFIX.
Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-6-armbru@redhat.com>
block: Use warn_report() & friends to report warnings
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split warnings consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract, and
improve a rather useless warning in sheepdog.c.
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-4-armbru@redhat.com>
Drop changes to "without an explicit read-only=on" warnings, because
there's a series removing them pending. Also drop a cc: to a former
Sheepdog maintainer.
Use error_fatal to simplify obvious fatal errors (again)
Add a slight improvement of the Coccinelle semantic patch from commit 007b06578ab, and use it to clean up. It leaves dead Error * variables
behind, cleaned up manually.
Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Eric Blake <eblake@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20181017082702.5581-3-armbru@redhat.com>
error: Fix use of error_prepend() with &error_fatal, &error_abort
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
vl: Print error when using incorrect backend for debugcon
When using an incorrect backend for the debugcon, QEMU exits silently
without any error indication, which is confusing.
Add a message that the character backend is invalid.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181011171254.32428-1-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Alberto Garcia [Wed, 17 Oct 2018 15:17:38 +0000 (18:17 +0300)]
scripts: Remove check-qerror.sh
qerror.h contains leftovers from the now-defunct QError API.
There's only a handful of string macros left, and no one is supposed
to add anything else. The check-qerror.sh script was used to make sure
that all definitions on the qerror.c and qerror.h files were sorted
alphabetically. The former was removed three years ago, and the latter
is now in a different location, so the script doesn't even work (as
a matter of fact the alphabetical order was broken last time someone
added a macro -also in 2015- and no one seemed to notice).
There's no point in fixing this script so let's just remove it.
The rogue macro is also moved to its correct location.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20181017151738.20299-1-berto@igalia.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cortland Tölva [Mon, 8 Oct 2018 16:35:21 +0000 (09:35 -0700)]
linux-user: Implement special usbfs ioctls.
Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to host and back.
Tested by running an i386 scanner driver on ARMv7 and by running
the PowerPC lsusb utility on x86_64. The discardurb ioctl is
not exercised in these tests.
Roman Kagan [Fri, 21 Sep 2018 08:22:17 +0000 (11:22 +0300)]
hyperv_testdev: add SynIC message and event testmodes
Add testmodes for SynIC messages and events. The message or event
connection setup / teardown is initiated by the guest via new control
codes written to the test device port. Then the test connections bounce
the respective operations back to the guest, i.e. the incoming messages
are posted or the incoming events are signaled on the configured vCPUs.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:16 +0000 (11:22 +0300)]
hyperv: process POST_MESSAGE hypercall
Add handling of POST_MESSAGE hypercall. For that, add an interface to
regsiter a handler for the messages arrived from the guest on a
particular connection id (IOW set up a message connection in Hyper-V
speak).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:15 +0000 (11:22 +0300)]
hyperv: add support for KVM_HYPERV_EVENTFD
When setting up a notifier for Hyper-V event connection, try to use the
KVM-assisted one first, and fall back to userspace handling of the
hypercall if the kernel doesn't provide the requested feature.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-9-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:14 +0000 (11:22 +0300)]
hyperv: process SIGNAL_EVENT hypercall
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface
to associate an EventNotifier with an event connection number, so that
it's signaled when the SIGNAL_EVENT hypercall with the matching
connection ID is called by the guest.
Support for using KVM functionality for this will be added in a followup
patch.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:13 +0000 (11:22 +0300)]
hyperv: add synic event flag signaling
Add infrastructure to signal SynIC event flags by atomically setting the
corresponding bit in the event flags page and firing a SINT if
necessary.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-7-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:12 +0000 (11:22 +0300)]
hyperv: add synic message delivery
Add infrastructure to deliver SynIC messages to the SynIC message page.
Note that KVM may also want to deliver (SynIC timer) messages to the
same message slot.
The problem is that the access to a SynIC message slot is controlled by
the value of its .msg_type field which indicates if the slot is being
owned by the hypervisor (zero) or by the guest (non-zero).
This leaves no room for synchronizing multiple concurrent producers.
The simplest way to deal with this for both KVM and QEMU is to only
deliver messages in the vcpu thread. KVM already does this; this patch
makes it for QEMU, too.
Specifically,
- add a function for posting messages, which only copies the message
into the staging buffer if its free, and schedules a work on the
corresponding vcpu to actually deliver it to the guest slot;
- instead of a sint ack callback, set up the sint route with a message
status callback. This function is called in a bh whenever there are
updates to the message slot status: either the vcpu made definitive
progress delivering the message from the staging buffer (succeeded or
failed) or the guest issued EOM; the status is passed as an argument
to the callback.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:11 +0000 (11:22 +0300)]
hyperv: make overlay pages for SynIC
Per Hyper-V spec, SynIC message and event flag pages are to be
implemented as so called overlay pages. That is, they are owned by the
hypervisor and, when mapped into the guest physical address space,
overlay the guest physical pages such that
1) the overlaid guest page becomes invisible to the guest CPUs until the
overlay page is turned off
2) the contents of the overlay page is preserved when it's turned off
and back on, even at a different address; it's only zeroed at vcpu
reset
This particular nature of SynIC message and event flag pages is ignored
in the current code, and guest physical pages are used directly instead.
This happens to (mostly) work because the actual guests seem not to
depend on the features listed above.
This patch implements those pages as the spec mandates.
Since the extra RAM regions, which introduce migration incompatibility,
are only added at SynIC object creation which only happens when
hyperv_synic_kvm_only == false, no extra compat logic is necessary.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:10 +0000 (11:22 +0300)]
hyperv: only add SynIC in compatible configurations
Certain configurations do not allow SynIC to be used in QEMU. In
particular,
- when hyperv_vpindex is off, SINT routes can't be used as they refer to
the destination vCPU by vp_index
- older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out
SynIC message and event pages on every msr load, breaking migration
OTOH in-KVM users of SynIC -- SynIC timers -- do work in those
configurations, and we shouldn't stop the guest from using them.
To cover both scenarios, introduce an X86CPU property that makes CPU
init code to skip creation of the SynIC object (and thus disables any
SynIC use in QEMU) but keeps the KVM part of the SynIC working.
The property is clear by default but is set via compat logic for older
machine types.
As a result, when hv_synic and a modern machine type are specified, QEMU
will refuse to run unless vp_index is on and the kernel is recent
enough. OTOH with an older machine type QEMU will run fine with
hv_synic=on against an older kernel and/or without vp_index enabled but
will disallow the in-QEMU uses of SynIC (in e.g. VMBus).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:09 +0000 (11:22 +0300)]
hyperv: qom-ify SynIC
Make Hyper-V SynIC a device which is attached as a child to a CPU. For
now it only makes SynIC visibile in the qom hierarchy, and maintains its
internal fields in sync with the respecitve msrs of the parent cpu (the
fields will be used in followup patches).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:22:08 +0000 (11:22 +0300)]
hyperv:synic: split capability testing and setting
Put a bit more consistency into handling KVM_CAP_HYPERV_SYNIC capability,
by checking its availability and determining the feasibility of hv-synic
property first, and enabling it later.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-2-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:20:41 +0000 (11:20 +0300)]
i386: add hyperv-stub for CONFIG_HYPERV=n
This will allow to build slightly leaner QEMU that supports some HyperV
features of KVM (e.g. SynIC timers, PV spinlocks, APIC assists, etc.)
but nothing else on the QEMU side.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:20:40 +0000 (11:20 +0300)]
default-configs: collect CONFIG_HYPERV* in hyperv.mak
Accumulate HYPERV config options in a dedicated file. There are only
two so far; more will be added later.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:20:39 +0000 (11:20 +0300)]
hyperv: factor out arch-independent API into hw/hyperv
A significant part of hyperv.c is not actually tied to x86, and can
be moved to hw/.
This will allow to maintain most of Hyper-V and VMBus
target-independent, and to avoid conflicts with inclusion of
arch-specific headers down the road in VMBus implementation.
Also this stuff can now be opt-out with CONFIG_HYPERV.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:20:38 +0000 (11:20 +0300)]
hyperv: make hyperv_vp_index inline
Also make the inverse function, hyperv_find_vcpu, static as it's not
used outside hyperv.c
This paves the way to making hyperv.c built optionally.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:20:37 +0000 (11:20 +0300)]
hyperv: split hyperv-proto.h into x86 and arch-independent parts
Some parts of the Hyper-V hypervisor-guest interface appear to be
target-independent, so move them into a proper header.
Not that Hyper-V ARM64 emulation is around the corner but it seems more
conveninent to have most of Hyper-V and VMBus target-independent, and
allows to avoid conflicts with inclusion of arch-specific headers down
the road in VMBus implementation.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-2-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:18:36 +0000 (11:18 +0300)]
hyperv: rename kvm_hv_sint_route_set_sint
There's nothing kvm-specific in it so follow the suite and replace
"kvm_hv" prefix with "hyperv".
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-9-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:18:35 +0000 (11:18 +0300)]
hyperv: make HvSintRoute reference-counted
Multiple entities (e.g. VMBus devices) can use the same SINT route. To
make their lives easier in maintaining SINT route ownership, make it
reference-counted. Adjust the respective API names accordingly.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:18:34 +0000 (11:18 +0300)]
hyperv: address HvSintRoute by X86CPU pointer
Use X86CPU pointer to refer to the respective HvSintRoute instead of
vp_index. This is more convenient and also paves the way for future
enhancements.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-7-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Roman Kagan [Fri, 21 Sep 2018 08:18:33 +0000 (11:18 +0300)]
hyperv: allow passing arbitrary data to sint ack callback
Make sint ack callback accept an opaque pointer, that is stored on
sint_route at creation time.
This allows for more convenient interaction with the callback.
Besides, nothing outside hyperv.c should need to know the layout of
HvSintRoute fields any more so its declaration can be removed from the
header.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / mirror_qemu.git / log