Avoid CPUArchState local variable when cpu_env() is used once.
Mechanical patch using the following Coccinelle spatch script:
@@
type CPUArchState;
identifier env;
expression cs;
@@
{
- CPUArchState *env = cpu_env(cs);
... when != env
- env
+ cpu_env(cs)
... when != env
}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-5-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
hw/core: Declare CPUArchId::cpu as CPUState instead of Object
Do not accept any Object for CPUArchId::cpu field,
restrict it to CPUState type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-3-philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
bulk: Access existing variables initialized to &S->F when available
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org> Acked-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()] Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Tue, 12 Mar 2024 06:03:37 +0000 (14:03 +0800)]
error: Move ERRP_GUARD() to the beginning of the function
Since the commit 05e385d2a9 ("error: Move ERRP_GUARD() to the beginning
of the function"), there are new codes that don't put ERRP_GUARD() at
the beginning of the functions.
As stated in the commit 05e385d2a9: "include/qapi/error.h advises to put
ERRP_GUARD() right at the beginning of the function, because only then
can it guard the whole function.", so clean up the few spots
disregarding the advice.
Inspired-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312060337.3240965-1-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:22 +0000 (11:38 +0800)]
target/s390x/cpu_models: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In target/s390x/cpu_models.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- check_compatibility()
- s390_realize_cpu_model()
Though both their @errp parameters point to their callers' local @err
virables and don't cause the issue as [1] said, to follow the
requirement of @errp, also add missing ERRP_GUARD() at their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: David Hildenbrand <david@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: qemu-s390x@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-30-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:21 +0000 (11:38 +0800)]
net/vhost-vdpa: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The net_init_vhost_vdpa() passes @errp to error_prepend(), and as a
member of net_client_init_fun[], it's called in net_client_init1() and
gets @errp from this caller.
But because netdev_init_modern() passes &error_fatal to
net_client_init1(), then @errp parameter of net_init_vhost_vdpa() would
point to @error_fatal. This causes the error message in error_prepend()
to be lost because of the above issue.
To fix this, add missing ERRP_GUARD() at the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240311033822.3142585-29-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:20 +0000 (11:38 +0800)]
migration/option: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The migrate_params_check() passes @errp to error_prepend() without
ERRP_GUARD(), and it could be called from migration_object_init(),
where the passed @errp points to @error_fatal.
Therefore, the error message echoed in error_prepend() will be lost
because of the above issue.
To fix this, add missing ERRP_GUARD() at the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Peter Xu <peterx@redhat.com> Cc: Fabiano Rosas <farosas@suse.de> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240311033822.3142585-28-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:19 +0000 (11:38 +0800)]
hw/virtio/vhost: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/virtio/vhost.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vhost_save_backend_state()
- vhost_load_backend_state()
Their @errp both points to callers' @local_err. However, as the APIs
defined in include/hw/virtio/vhost.h, it is necessary to protect their
@errp with ERRP_GUARD().
To follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-27-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:18 +0000 (11:38 +0800)]
hw/virtio/vhost-vsock: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vhost_vsock_device_realize() passes @errp to error_prepend(), and as
a VirtioDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-26-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:17 +0000 (11:38 +0800)]
hw/vfio/platform: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vfio_platform_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-25-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:16 +0000 (11:38 +0800)]
hw/vfio/pci: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/vfio/pci.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
- vfio_add_std_cap()
- vfio_realize()
The @errp of vfio_add_std_cap() is also from vfio_realize(). And
vfio_realize(), as a PCIDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.
To avoid the issue like [1] said, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-24-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:15 +0000 (11:38 +0800)]
hw/vfio/pci-quirks: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/vfio/pci-quirks.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vfio_add_nv_gpudirect_cap()
- vfio_add_vmd_shadow_cap()
There are too many possible callers to check the impact of this defect;
it may or may not be harmless. Thus it is necessary to protect their
@errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-23-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:14 +0000 (11:38 +0800)]
hw/vfio/iommufd: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The iommufd_cdev_getfd() passes @errp to error_prepend(). Its @errp is
from vfio_attach_device(), and there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-22-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:13 +0000 (11:38 +0800)]
hw/vfio/helpers: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/vfio/helpers.c, there are 3 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vfio_set_irq_signaling()
- vfio_device_get_name()
- vfio_device_set_fd()
There are too many possible callers to check the impact of this defect;
it may or may not be harmless. Thus it is necessary to protect their
@errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-21-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:12 +0000 (11:38 +0800)]
hw/vfio/container: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vfio_get_group() passes @errp to error_prepend(). Its @errp is
from vfio_attach_device(), and there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-20-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:11 +0000 (11:38 +0800)]
hw/vfio/ap: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vfio_ap_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cédric Le Goater <clg@redhat.com> Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Jason Herne <jjherne@linux.ibm.com> Cc: Thomas Huth <thuth@redhat.com> Cc: qemu-s390x@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240311033822.3142585-19-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:10 +0000 (11:38 +0800)]
hw/scsi/vhost-scsi: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vhost_scsi_realize() passes @errp to error_prepend(), and as a
VirtioDeviceClass.realize method, its @errp is from DeviceClass.realize
so that there is no guarantee that the @errp won't point to
@error_fatal.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Fam Zheng <fam@euphon.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-18-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:06 +0000 (11:38 +0800)]
block/virtio-blk: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The virtio_blk_vq_aio_context_init() passes @errp to error_prepend().
Though its @errp points its caller's local @err variable, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of
virtio_blk_vq_aio_context_init().
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Message-ID: <20240311033822.3142585-14-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:05 +0000 (11:38 +0800)]
block/vmdk: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vmdk_parse_extents() passes @errp to error_prepend(), and its @errp
is from vmdk_open().
Though, vmdk_open(), as a BlockDriver.bdrv_open(), gets the @errp
parameter which is pointer of its caller's local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Fam Zheng <fam@euphon.net> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-13-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:04 +0000 (11:38 +0800)]
block/vdi: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vdi_co_do_create() passes @errp to error_prepend() without
ERRP_GUARD(), and its @errp parameter is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the potential issues as [1] said, add missing ERRP_GUARD() at
the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefan Weil <sw@weilnetz.de> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-12-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:03 +0000 (11:38 +0800)]
block/snapshot: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/snapshot.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- bdrv_all_delete_snapshot()
- bdrv_all_goto_snapshot()
As the APIs exposed in include/block/snapshot.h, they could be called
by other modules.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of these 2 functions.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-11-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:02 +0000 (11:38 +0800)]
block/qed: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The bdrv_qed_co_invalidate_cache() passes @errp to error_prepend()
without ERRP_GUARD().
Though it is a BlockDriver.bdrv_co_invalidate_cache() method, and
currently its @errp parameter only points to callers' local_err, to
follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-10-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:01 +0000 (11:38 +0800)]
block/qcow2: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/qcow2.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
- qcow2_co_create()
- qcow2_co_truncate()
There are too many possible callers to check the impact of the defect;
it may or may not be harmless. Thus it is necessary to protect @errp with
ERRP_GUARD().
Therefore, to avoid the issue like [1] said, add missing ERRP_GUARD() at
their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-9-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:38:00 +0000 (11:38 +0800)]
block/qcow2-bitmap: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The qcow2_co_can_store_new_dirty_bitmap() passes @errp to
error_prepend(). As a BlockDriver.bdrv_co_can_store_new_dirty_bitmap
method, it's called by bdrv_co_can_store_new_dirty_bitmap().
Its caller is not being called anywhere, but as the API in
include/block/block-io.h, we can't ensure what kind of @errp future
users will pass in.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of qcow2_co_can_store_new_dirty_bitmap().
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Cc: John Snow <jsnow@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-8-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:59 +0000 (11:37 +0800)]
block/nvme: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In nvme.c, there are 3 functions passing @errp to error_prepend()
without ERRP_GUARD():
- nvme_init_queue()
- nvme_create_queue_pair()
- nvme_identify()
All these 3 functions take their @errp parameters from the
nvme_file_open(), which is a BlockDriver.bdrv_nvme() method and its
@errp points to its caller's local_err.
Though these 3 cases haven't trigger the issue like [1] said, to
follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Fam Zheng <fam@euphon.net> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-7-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:58 +0000 (11:37 +0800)]
block/nbd: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The nbd_co_do_receive_one_chunk() passes @errp to error_prepend()
without ERRP_GUARD(), and though its @errp parameter points to its
caller's local_err, to follow the requirement of @errp, add missing
ERRP_GUARD() at the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Eric Blake <eblake@redhat.com> Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-6-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:57 +0000 (11:37 +0800)]
block/copy-before-write: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The cbw_open() passes @errp to error_prepend() without ERRP_GUARD().
Though it is the BlockDriver.bdrv_open() method, and currently its
@errp parameter only points to callers' local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: John Snow <jsnow@redhat.com> Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-5-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:56 +0000 (11:37 +0800)]
block: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block.c, there are 4 functions passing @errp to error_prepend()
without ERRP_GUARD():
- bdrv_co_create_opts_simple()
- parse_json_filename()
- bdrv_open_backing_file()
- bdrv_append_temp_snapshot()
bdrv_co_create_opts_simple(), is an implementation of
BlockDriver.bdrv_co_create_opts(). There are too many possible callers
to check the impact of this defect; it may or may not be harmless. Thus
it is necessary to protect @errp with ERRP_GUARD().
Though the @errp parameters passed to parse_json_filename(),
bdrv_open_backing_file() and bdrv_append_temp_snapshot() points to their
callers' local_err, to follow the requirement of @errp, also add missing
ERRP_GUARD() at their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-4-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:55 +0000 (11:37 +0800)]
backends/iommufd: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The iommufd_backend_set_fd() passes @errp to error_prepend(), to avoid
the above issue, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Yi Liu <yi.l.liu@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-ID: <20240311033822.3142585-3-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Mon, 11 Mar 2024 03:37:54 +0000 (11:37 +0800)]
error: Add error_vprepend() in comment of ERRP_GUARD() rules
The error_vprepend() should use ERRP_GUARD() just as the documentation
of ERRP_GUARD() says:
> It must be used when the function dereferences @errp or passes
> @errp to error_prepend(), error_vprepend(), or error_append_hint().
Considering that error_vprepend() is also an API provided in error.h,
it is necessary to add it to the description of the rules for using
ERRP_GUARD().
Cc: Markus Armbruster <armbru@redhat.com> Cc: Michael Roth <michael.roth@amd.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240311033822.3142585-2-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:53 +0000 (16:56 +0800)]
hw/intc: Check @errp to handle the error of IOAPICCommonClass.realize()
IOAPICCommonClass implements its own private realize(), and this private
realize() allows error.
Since IOAPICCommonClass.realize() returns void, to check the error,
dereference @errp with ERRP_GUARD().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-8-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:51 +0000 (16:56 +0800)]
hw/pci-bridge/cxl_upstream: Fix missing ERRP_GUARD() in cxl_usp_realize()
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in cxl_usp_realize(), @errp is dereferenced without ERRP_GUARD():
cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
goto err_cap;
}
Here we check *errp, because cxl_doe_cdat_init() returns void. And since
cxl_usp_realize() - as a PCIDeviceClass.realize() method - doesn't get
the NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_usp_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223085653.1255438-6-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:50 +0000 (16:56 +0800)]
hw/misc/xlnx-versal-trng: Check returned bool in trng_prop_fault_event_set()
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in trng_prop_fault_event_set, @errp is dereferenced without
ERRP_GUARD():
visit_type_uint32(v, name, events, errp);
if (*errp) {
return;
}
Currently, since trng_prop_fault_event_set() doesn't get the NULL @errp
parameter as a "set" method of object property, it hasn't triggered the
bug that dereferencing the NULL @errp.
And since visit_type_uint32() returns bool, check the returned bool
directly instead of dereferencing @errp, then we needn't the add missing
ERRP_GUARD().
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-5-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:49 +0000 (16:56 +0800)]
hw/mem/cxl_type3: Fix missing ERRP_GUARD() in ct3_realize()
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in ct3_realize(), @errp is dereferenced without ERRP_GUARD():
cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
goto err_free_special_ops;
}
Here we check *errp, because cxl_doe_cdat_init() returns void. And
ct3_realize() - as a PCIDeviceClass.realize() method - doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
ct3_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-4-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:48 +0000 (16:56 +0800)]
hw/display/macfb: Fix missing ERRP_GUARD() in macfb_nubus_realize()
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in macfb_nubus_realize(), @errp is dereferenced without
ERRP_GUARD():
ndc->parent_realize(dev, errp);
if (*errp) {
return;
}
Here we check *errp, because the ndc->parent_realize(), as a
DeviceClass.realize() callback, returns void. And since
macfb_nubus_realize(), also as a DeviceClass.realize(), doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing the
NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
macfb_nubus_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-3-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Zhao Liu [Fri, 23 Feb 2024 08:56:47 +0000 (16:56 +0800)]
hw/cxl/cxl-host: Fix missing ERRP_GUARD() in cxl_fixed_memory_window_config()
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in cxl_fixed_memory_window_config(), @errp is dereferenced in 2
places without ERRP_GUARD():
fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
if (*errp) {
return;
}
and
fw->enc_int_gran =
cxl_interleave_granularity_enc(object->interleave_granularity,
errp);
if (*errp) {
return;
}
For the above 2 places, we check "*errp", because neither function
returns a suitable error code. And since machine_set_cfmw() - the caller
of cxl_fixed_memory_window_config() - doesn't get the NULL @errp
parameter as the "set" method of object property,
cxl_fixed_memory_window_config() hasn't triggered the bug that
dereferencing the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_fixed_memory_window_config().
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-2-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* tag 'hw-misc-20240309' of https://github.com/philmd/qemu: (43 commits)
hw/m68k/mcf5208: add support for reset
tests/unit/test-smp-parse: Test "parameter=0" SMP configurations
tests/unit/test-smp-parse: Test smp_props.has_clusters
tests/unit/test-smp-parse: Test the full 7-levels topology hierarchy
tests/unit/test-smp-parse: Test "drawers" and "books" combination case
tests/unit/test-smp-parse: Test "drawers" parameter in -smp
tests/unit/test-smp-parse: Test "books" parameter in -smp
tests/unit/test-smp-parse: Make test cases aware of the book/drawer
tests/unit/test-smp-parse: Bump max_cpus to 4096
tests/unit/test-smp-parse: Use CPU number macros in invalid topology case
tests/unit/test-smp-parse: Drop the unsupported "dies=1" case
hw/core/machine-smp: Calculate total CPUs once in machine_parse_smp_config()
hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
hw/core/machine-smp: Remove deprecated "parameter=0" SMP configurations
docs/interop/firmware.json: Fix doc for FirmwareFlashMode
docs/interop/firmware.json: Align examples
hw/intc/grlib_irqmp: abort realize when ncpus value is out of range
mac_newworld: change timebase frequency from 100MHz to 25MHz for mac99 machine
hmp: Add option to info qtree to omit details
qdev: Add a granule_mode property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
docs/acpi/bits: add some clarity and details while also improving formating
hw/mem/cxl_type3: Fix problem with g_steal_pointer()
hw/pci-bridge/cxl_upstream: Fix problem with g_steal_pointer()
hw/cxl/cxl-cdat: Fix type of buf in ct3_load_cdat()
qerror: QERR_DEVICE_IN_USE is no longer used, drop
blockdev: Fix block_resize error reporting for op blockers
char: Slightly better error reporting when chardev is in use
make-release: switch to .xz format by default
hw/scsi/lsi53c895a: Fix typo in comment
hw/vfio/pci.c: Make some structure static
replay: Improve error messages about configuration conflicts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:48 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test "parameter=0" SMP configurations
The support for "parameter=0" SMP configurations is removed, and QEMU
returns error for those cases.
So add the related test cases to ensure parameters can't accept 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-14-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:47 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test smp_props.has_clusters
The smp_props.has_clusters in MachineClass is not a user configured
field, and it indicates if user specifies "clusters" in -smp.
After -smp parsing, other module could aware if the cluster level
is configured by user. This is used when the machine has only 1 cluster
since there's only 1 cluster by default.
Add the check to cover this field.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-13-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:46 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test the full 7-levels topology hierarchy
Currently, -smp supports up to 7-levels topology hierarchy:
-drawers/books/sockets/dies/clusters/cores/threads.
Though no machine supports all these 7 levels yet, these 7 levels have
the strict containment relationship and together form the generic CPU
topology representation of QEMU.
Also, note that the maxcpus is calculated by multiplying all 7 levels:
To cover this code path, it is necessary to test the full topology case
(with all 7 levels). This also helps to avoid introducing new issues by
further expanding the CPU topology in the future.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-12-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:45 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test "drawers" and "books" combination case
Since s390 machine supports both "drawers" and "books" in -smp, add the
"drawers" and "books" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-11-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:44 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test "drawers" parameter in -smp
Although drawer was introduced to -smp along with book by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-10-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:43 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Test "books" parameter in -smp
Although book was introduced to -smp along with drawer by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-9-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:42 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Make test cases aware of the book/drawer
Currently, -smp supports 2 more new levels: book and drawer.
It is necessary to consider the effects of book and drawer in the test
cases to ensure that the calculations are correct. This is also the
preparation to add new book and drawer test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-8-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:41 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Bump max_cpus to 4096
The q35 machine is trying to support up to 4096 vCPUs [1], so it's
necessary to bump max_cpus in test-smp-parse to 4096 to cover the
topological needs of future machines.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-7-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:40 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Use CPU number macros in invalid topology case
Use MAX_CPUS/MIN_CPUS macros in invalid topology case. This gives us the
flexibility to change the maximum and minimum CPU limits.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Tested-by: Xiaoling Song <xiaoling.song@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-6-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Fri, 8 Mar 2024 16:01:39 +0000 (00:01 +0800)]
tests/unit/test-smp-parse: Drop the unsupported "dies=1" case
Unsupported "parameter=1" SMP configurations is marked as deprecated,
so drop the related test case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-5-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To avoid missing the future new topology level, use a local variable to
cache the calculation result so that total CPUs are only calculated
once.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308160148.3130837-4-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind of
configurations is marked deprecated since 9.0. And report warning
message for such case like:
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported clusters parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported books parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported drawers parameter mustn't be specified as 1
Users have to ensure that all the topology members described with -smp
are supported by the target machine.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-3-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
docs/interop/firmware.json: Fix doc for FirmwareFlashMode
The doc title did not match the actual definition.
Fixes: 2720ceda05 ("docs: expand firmware descriptor to allow flash without NVRAM") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240307-qapi-firmware-json-v2-2-3b29eabb9b9a@linutronix.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Adjust indentation for commit d23055b8db8 (qapi: Require descriptions
and tagged sections to be indented).
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240307-qapi-firmware-json-v2-1-3b29eabb9b9a@linutronix.de>
[PMD: Reword description using Markus suggestion] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
mac_newworld: change timebase frequency from 100MHz to 25MHz for mac99 machine
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Fri, 1 Mar 2024 18:01:10 +0000 (19:01 +0100)]
hmp: Add option to info qtree to omit details
The output of info qtree monitor command is very long. Add an option
to print a brief overview omitting all the details.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240307183812.0105D4E6004@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Eric Auger [Tue, 27 Feb 2024 16:55:48 +0000 (17:55 +0100)]
qdev: Add a granule_mode property
Introduce a new enum type property allowing to set an
IOMMU granule. Values are 4k, 8k, 16k, 64k and host.
This latter indicates the vIOMMU granule will match
the host page size.
A subsequent patch will add such a property to the
virtio-iommu device.
Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227165730.14099-2-eric.auger@redhat.com>
Paolo Bonzini [Mon, 4 Mar 2024 22:41:33 +0000 (23:41 +0100)]
hw/intc/apic: fix memory leak
deliver_bitmask is allocated on the heap in apic_deliver(), but there
are many paths in the function that return before the corresponding
g_free() is reached. Fix this by switching to g_autofree and, while at
it, also switch to g_new. Do the same in apic_deliver_irq() as well
for consistency.
Fixes: b5ee0468e9d ("apic: add support for x2APIC mode", 2024-02-14) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240304224133.267640-1-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
hw/i386/pc: Have pc_init_isa() pass a NULL pci_type argument
The "isapc" machine only provides an ISA bus, not a PCI one,
and doesn't instanciate any i440FX south bridge.
Its machine class defines PCMachineClass::pci_enabled = false,
and pc_init1() only uses the pci_type argument when pci_enabled
is true. Since for this machine the argument is not used,
passing NULL makes more sense.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240301185936.95175-5-philmd@linaro.org>
hw/i386/pc: Remove 'host_type' argument from pc_init1()
All callers use host_type=TYPE_I440FX_PCI_HOST_BRIDGE.
Directly use this definition within pc_init1().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-4-philmd@linaro.org>
hw/i386/pc: Use generated NotifyVmexitOption_str()
NotifyVmexitOption_str() is QAPI-generated in
"qapi/qapi-types-run-state.h", which "sysemu/runstate.h"
already includes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-3-philmd@linaro.org>
hw/i386/pc: Remove pc_compat_1_4..1.7[] left over declarations
These definitions were removed in commit ea985d235b
("pc_piix: remove pc-i440fx-1.4 up to pc-i440fx-1.7").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240301185936.95175-2-philmd@linaro.org>
Zhao Liu [Thu, 29 Feb 2024 14:39:13 +0000 (22:39 +0800)]
target/i386/sev: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The sev_inject_launch_secret() passes @errp to error_prepend(), and as
an APIs defined in target/i386/sev.h, it is necessary to protect its
@errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-17-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Thu, 29 Feb 2024 14:39:00 +0000 (22:39 +0800)]
hw/remote/remote-obj: hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The remote_object_set_fd() passes @errp to error_prepend(), and as a
PropertyInfo.set method, its @errp is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com> Cc: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-4-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Thu, 29 Feb 2024 14:38:59 +0000 (22:38 +0800)]
hw/net/xen_nic: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_netdev_connect() passes @errp to error_prepend(), and its @errp
parameter is from xen_device_frontend_changed().
Though its @errp points to @local_err of xen_device_frontend_changed(),
to follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Paul Durrant <paul@xen.org> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240229143914.1977550-3-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Zhao Liu [Wed, 28 Feb 2024 16:37:21 +0000 (00:37 +0800)]
hw/char/xen_console: Fix missing ERRP_GUARD() for error_prepend()
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is the pointer of
error_fatal, the user can't see this additional information, because
exit() happens in error_setg earlier than information is added [1].
The xen_console_connect() passes @errp to error_prepend() without
ERRP_GUARD().
There're 2 places will call xen_console_connect():
- xen_console_realize(): the @errp is from DeviceClass.realize()'s
parameter.
- xen_console_frontend_changed(): the @errp points its caller's
@local_err.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of xen_console_connect().
[1]: Issue description in the commit message of commit ae7c80a7bd73
("error: New macro ERRP_GUARD()").
Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Paul Durrant <paul@xen.org> Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-ID: <20240228163723.1775791-15-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
hw/xen/hvm: Propagate page_mask to a pair of functions
We are going to replace TARGET_PAGE_MASK by a
runtime variable. In order to reduce code duplication,
propagate TARGET_PAGE_MASK to get_physmapping() and
xen_phys_offset_to_gaddr().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231114163123.74888-3-philmd@linaro.org>
hw/i386/xen: Compile 'xen-hvm.c' with Xen CPPFLAGS
xen-hvm.c calls xc_set_hvm_param() from <xenctrl.h>,
so better compile it with Xen CPPFLAGS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-19-philmd@linaro.org>
"hw/xen/xen_pt.h" requires "hw/xen/xen_native.h" which is target
specific. It also declares IGD methods, which are not target
specific.
Target-agnostic code can use IGD methods. To allow that, extract
these methos into a new "hw/xen/xen_igd.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-18-philmd@linaro.org>
Commit eaab4d60d3 ("Introduce Xen PCI Passthrough, qdevice")
introduced both xen_pt.[ch], but only added the license to
xen_pt.c. Use the same license for xen_pt.h.
Suggested-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-17-philmd@linaro.org>
hw/xen: Use target-agnostic qemu_target_page_bits()
Instead of the target-specific TARGET_PAGE_BITS definition,
use qemu_target_page_bits() which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-15-philmd@linaro.org>
hw/xen: Rename 'ram_memory' global variable as 'xen_memory'
To avoid a potential global variable shadow in
hw/i386/pc_piix.c::pc_init1(), rename Xen's
"ram_memory" as "xen_memory".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-11-philmd@linaro.org>
Since commit 04b0de0ee8 ("xen: factor out common functions")
xen_hvm_inject_msi() stub is not required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-8-philmd@linaro.org>
hw/pci/msi: Restrict xen_is_pirq_msi() call to Xen
Similarly to the restriction in hw/pci/msix.c (see commit e1e4bf2252 "msix: fix msix_vector_masked"), restrict the
xen_is_pirq_msi() call in msi_is_masked() to Xen.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-7-philmd@linaro.org>
system/physmem: Do not include 'hw/xen/xen.h' but 'sysemu/xen.h'
physmem.c doesn't use any declaration from "hw/xen/xen.h",
it only requires "sysemu/xen.h" and "system/xen-mapcache.h".
Suggested-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20231114143816.71079-5-philmd@linaro.org>
sysemu/xen-mapcache: Check Xen availability with CONFIG_XEN_IS_POSSIBLE
"sysemu/xen.h" defines CONFIG_XEN_IS_POSSIBLE as a target-agnostic
version of CONFIG_XEN accelerator.
Use it in order to use "sysemu/xen-mapcache.h" in target-agnostic files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-4-philmd@linaro.org>
sysemu/xen: Forbid using Xen headers in user emulation
Xen is a system specific accelerator, it makes no sense
to include its headers in user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-3-philmd@linaro.org>
Ani Sinha [Fri, 8 Mar 2024 04:22:52 +0000 (09:52 +0530)]
docs/acpi/bits: add some clarity and details while also improving formating
Update bios-bits docs to add more details on why a pre-OS environment for
testing bioses is useful. Add author's FOSDEM talk link. Also improve the
formating of the document while at it.
Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Mon, 4 Mar 2024 10:44:06 +0000 (11:44 +0100)]
hw/mem/cxl_type3: Fix problem with g_steal_pointer()
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher,
glib adds type safety checks to the g_steal_pointer() macro. This
triggers errors in the ct3_build_cdat_entries_for_mr() function which
uses the g_steal_pointer() for type-casting from one pointer type to
the other (which also looks quite weird since the local pointers have
all been declared with g_autofree though they are never freed here).
Fix it by using a proper typecast instead. For making this possible, we
have to remove the QEMU_PACKED attribute from some structs since GCC
otherwise complains that the source and destination pointer might
have different alignment restrictions. Removing the QEMU_PACKED should
be fine here since the structs are already naturally aligned. Anyway,
add some QEMU_BUILD_BUG_ON() statements to make sure that we've got
the right sizes (without padding in the structs).
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Mon, 4 Mar 2024 10:44:05 +0000 (11:44 +0100)]
hw/pci-bridge/cxl_upstream: Fix problem with g_steal_pointer()
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher,
glib adds type safety checks to the g_steal_pointer() macro. This
triggers errors in the build_cdat_table() function which uses the
g_steal_pointer() for type-casting from one pointer type to the other
(which also looks quite weird since the local pointers have all been
declared with g_autofree though they are never freed here). Let's fix
it by using a proper typecast instead. For making this possible, we
have to remove the QEMU_PACKED attribute from some structs since GCC
otherwise complains that the source and destination pointer might
have different alignment restrictions. Removing the QEMU_PACKED should
be fine here since the structs are already naturally aligned. Anyway,
add some QEMU_BUILD_BUG_ON() statements to make sure that we've got
the right sizes (without padding in the structs).
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Mon, 4 Mar 2024 10:44:04 +0000 (11:44 +0100)]
hw/cxl/cxl-cdat: Fix type of buf in ct3_load_cdat()
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher
(which we'll certainly do in the not too distant future), glib adds
type safety checks to the g_steal_pointer() macro. This trigger an
error in the ct3_load_cdat() function: The local char *buf variable is
assigned to uint8_t *buf in CDATObject, i.e. a pointer of a different
type. Change the local variable to the same type as buf in CDATObject
to avoid the error.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qerror: QERR_DEVICE_IN_USE is no longer used, drop
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-> {"execute": "block_resize", "arguments": {"node-name": "blk1", "size":32768}}
<- {"error": {"class": "GenericError", "desc": "Device '(null)' is in use"}}
Broken when commit 3b1dbd11a60 made @device optional. Fixed in commit ed3d2ec98a3 (block: Add errp to b{lk,drv}_truncate()), except for this
one instance.
Fix it by using the error message provided by the op blocker instead,
so it fails like this:
<- {"error": {"class": "GenericError", "desc": "Node 'blk1' is busy: block device is in use by block job: mirror"}}
Fixes: 3b1dbd11a60d (qmp: Allow block_resize to manipulate bs graph nodes.) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Mon, 4 Mar 2024 18:46:39 +0000 (21:46 +0300)]
make-release: switch to .xz format by default
For a long time, we provide two compression formats in the
download area, .bz2 and .xz. There's absolutely no reason
to provide two in parallel, .xz compresses better, and all
the links we use points to .xz. Downstream distributions
mostly use .xz too.
For the release maintenance providing two formats is definitely
extra burden too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
replay: Improve error messages about configuration conflicts
Improve
Record/replay feature is not supported for '-rtc base=localtime'
Record/replay feature is not supported for 'smp'
Record/replay feature is not supported for '-snapshot'
to
Record/replay is not supported with -rtc base=localtime
Record/replay is not supported with multiple CPUs
Record/replay is not supported with -snapshot
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
gitlab-ci: add manual job to run Coverity
run-coverity-scan: add --check-upload-only option
mips: do not list individual devices from configs/
oslib-posix: fix memory leak in touch_all_pages
hw/intc/apic: fix memory leak
hw/scsi/lsi53c895a: stop script on phase mismatch
meson: Remove --warn-common ldflag
system/qdev-monitor: move drain_call_rcu call under if (!dev) in qmp_device_add()
hw/scsi/lsi53c895a: add timer to scripts processing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 9 Mar 2024 15:01:33 +0000 (15:01 +0000)]
Merge tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory and VMBus misc small patches
This pull request contains two small patches to hv-balloon:
the first one replacing alloca() usage with g_malloc0() + g_autofree
and the second one adding additional declaration of a protocol message
struct with an optional field explicitly defined to avoid a Coverity
warning.
Also included is a VMBus patch to print a warning when it is enabled
without the recommended set of Hyper-V features (enlightenments) since
some Windows versions crash at boot in this case.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmXrQeMACgkQUrHW6VHQ
# zgcvWwv9GUCDnidnDka8WGF2wgBEaPPdC2JXcqRFFLADISBAn/3fhsOERO6FwYuN
# pouhVEJnHpp9ueNAx+et51ySRzGCaL+VdOGGeReQllIOZGsnOnB8JfM58UE4lX4Z
# prCr72bxFsunxRqlqxssejrc8fBhgEQRPo5lQabl73rxftpXkNTHY0CGTwlvnaY1
# CzEBTBuowzkZJbQYDL8Qim2HrYqrSnOaend6bbrj9P6P+UFw9wLJU5tkfYCiHUjg
# Ux2Fjjx+5+qD9yE7khtxSHqjwWYkR7xA9di1yv4Znqg18gzdbuqnlrKR7F0v98yh
# sWFy+fyfVRDg+G2yh2F+vAUjmAJUrfw5+GL3uZTWIevoQUoSHBQfgUEJrlIKvykZ
# WP1XuAZRH3m2akDOXOWZVcDhkb3zPKtPJYZ2WncBZk+DLCs/vg94Taq0FcZefBTn
# 6qsFjs2lHz96uOSzgqICfU34ghcxfU5xgzmvKxKAiriOItmRMHgIYOXLHRfaIJhV
# MT/9OMuW
# =kVny
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 08 Mar 2024 16:50:43 GMT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20240308' of https://github.com/maciejsszmigiero/qemu:
vmbus: Print a warning when enabled without the recommended set of features
hv-balloon: define dm_hot_add_with_region to avoid Coverity warning
hv-balloon: avoid alloca() usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 8 Mar 2024 18:19:25 +0000 (18:19 +0000)]
Merge tag 'darwin-20240305' of https://github.com/philmd/qemu into staging
Darwin Cocoa patches:
- Add 'zoom-interpolation' to smooth scaled display with 'zoom-to-fit' (Carwyn)
- Set clipsToBounds on macOS 14 to fix window clipping (David)
- Use NSWindow's ability to resize (Akihiko)
Peter Maydell [Fri, 8 Mar 2024 18:19:09 +0000 (18:19 +0000)]
Merge tag 'pull-target-arm-20240308' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_ECV
* STM32L4x5: Implement GPIO device
* Fix 32-bit SMOPA
* Refactor v7m related code from cpu32.c into its own file
* hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later
* tag 'pull-target-arm-20240308' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Move v7m-related code from cpu32.c into a separate file
hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later
target/arm: Fix 32-bit SMOPA
tests/qtest: Add STM32L4x5 GPIO QTest testcase
hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC
hw/gpio: Implement STM32L4x5 GPIO
target/arm: Enable FEAT_ECV for 'max' CPU
target/arm: Implement FEAT_ECV CNTPOFF_EL2 handling
target/arm: Define CNTPCTSS_EL0 and CNTVCTSS_EL0
target/arm: Implement new FEAT_ECV trap bits
target/arm: Don't allow RES0 CNTHCTL_EL2 bits to be written
target/arm: use FIELD macro for CNTHCTL bit definitions
target/arm: Timer _EL02 registers UNDEF for E2H == 0
target/arm: Move some register related defines to internals.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Mon, 4 Mar 2024 18:16:50 +0000 (13:16 -0500)]
gitlab-ci: add manual job to run Coverity
Add a job that can be run, either manually or on a schedule, to upload
a build to Coverity Scan. The job uses the run-coverity-scan script
in multiple phases of check, download tools and upload, in order to
avoid both wasting time (skip everything if you are above the upload
quota) and avoid filling the log with the progress of downloading
the tools.
The job is intended to run on a scheduled pipeline run, and scheduled
runs will not get any other job. It requires two variables to be in
GitLab CI, COVERITY_TOKEN and COVERITY_EMAIL. Those are already set up
in qemu-project's configuration as protected and masked variables.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 4 Mar 2024 18:06:57 +0000 (13:06 -0500)]
run-coverity-scan: add --check-upload-only option
Add an option to check if upload is permitted without actually
attempting a build. This can be useful to add a third outcome
beyond success and failure---namely, a CI job can self-cancel
if the uploading quota has been reached.
There is a small change here in that a failure to do the upload
check changes the exit code from 1 to 99. 99 was chosen because
it is what Autotools and Meson use to represent a problem in the
setup (as opposed to a failure in the test).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 29 Jan 2024 13:21:36 +0000 (14:21 +0100)]
mips: do not list individual devices from configs/
Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 4 Mar 2024 22:48:17 +0000 (23:48 +0100)]
oslib-posix: fix memory leak in touch_all_pages
touch_all_pages() can return early, before creating threads. In this case,
however, it leaks the MemsetContext that it has allocated at the
beginning of the function.
Fixes: 04accf43df8 ("oslib-posix: initialize backend memory objects in parallel", 2024-02-06) Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>