]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
6 years agotipc: reset bearer if device carrier not ok
Parthasarathy Bhuvaragan [Tue, 25 Sep 2018 19:56:57 +0000 (21:56 +0200)]
tipc: reset bearer if device carrier not ok

If we detect that under lying carrier detects errors and goes down,
we reset the bearer.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotipc: fix flow control accounting for implicit connect
Parthasarathy Bhuvaragan [Tue, 25 Sep 2018 16:21:58 +0000 (18:21 +0200)]
tipc: fix flow control accounting for implicit connect

In the case of implicit connect message with data > 1K, the flow
control accounting is incorrect. At this state, the socket does not
know the peer nodes capability and falls back to legacy flow control
by return 1, however the receiver of this message will perform the
new block accounting. This leads to a slack and eventually traffic
disturbance.

In this commit, we perform tipc_node_get_capabilities() at implicit
connect and perform accounting based on the peer's capability.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: hns: fix for unmapping problem when SMMU is on
Yunsheng Lin [Tue, 25 Sep 2018 09:21:55 +0000 (10:21 +0100)]
net: hns: fix for unmapping problem when SMMU is on

If SMMU is on, there is more likely that skb_shinfo(skb)->frags[i]
can not send by a single BD. when this happen, the
hns_nic_net_xmit_hw function map the whole data in a frags using
skb_frag_dma_map, but unmap each BD' data individually when tx is
done, which causes problem when SMMU is on.

This patch fixes this problem by ummapping the whole data in a
frags when tx is done.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'xen-netback-hash'
David S. Miller [Tue, 25 Sep 2018 17:39:35 +0000 (10:39 -0700)]
Merge branch 'xen-netback-hash'

Jan Beulich says:

====================
xen-netback: hash mapping handling adjustments

First and foremost the fix for XSA-270. On top of that further changes
which looked desirable to me while investigating that XSA.

1: fix input validation in xenvif_set_hash_mapping()
2: validate queue numbers in xenvif_set_hash_mapping()
3: handle page straddling in xenvif_set_hash_mapping()
====================

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoxen-netback: handle page straddling in xenvif_set_hash_mapping()
Jan Beulich [Tue, 25 Sep 2018 08:13:37 +0000 (02:13 -0600)]
xen-netback: handle page straddling in xenvif_set_hash_mapping()

There's no guarantee that the mapping array doesn't cross a page
boundary. Use a second grant copy operation if necessary.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoxen-netback: validate queue numbers in xenvif_set_hash_mapping()
Jan Beulich [Tue, 25 Sep 2018 08:13:01 +0000 (02:13 -0600)]
xen-netback: validate queue numbers in xenvif_set_hash_mapping()

Checking them before the grant copy means nothing as to the validity of
the incoming request. As we shouldn't make the new data live before
having validated it, introduce a second instance of the mapping array.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoxen-netback: fix input validation in xenvif_set_hash_mapping()
Jan Beulich [Tue, 25 Sep 2018 08:12:30 +0000 (02:12 -0600)]
xen-netback: fix input validation in xenvif_set_hash_mapping()

Both len and off are frontend specified values, so we need to make
sure there's no overflow when adding the two for the bounds check. We
also want to avoid undefined behavior and hence use off to index into
->hash.mapping[] only after bounds checking. This at the same time
allows to take care of not applying off twice for the bounds checking
against vif->num_queues.

It is also insufficient to bounds check copy_op.len, as this is len
truncated to 16 bits.

This is XSA-270 / CVE-2018-15471.

Reported-by: Felix Wilhelm <fwilhelm@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Cc: stable@vger.kernel.org [4.7 onwards]
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: macb: Clean 64b dma addresses if they are not detected
Michal Simek [Tue, 25 Sep 2018 06:32:50 +0000 (08:32 +0200)]
net: macb: Clean 64b dma addresses if they are not detected

Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is
not detected on 64bit system.
The issue was observed when bootloader(u-boot) does not check macb
feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support
by default. Then macb driver is reading DMACFG register back and only
adding 64bit dma configuration but not cleaning it out.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Greg Kroah-Hartman [Tue, 25 Sep 2018 16:14:14 +0000 (18:14 +0200)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

James writes:
  "SCSI fixes on 20180925

   Nine obvious bug fixes mostly in individual drivers.  The target fix
   is of particular importance because it's CVE related."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: don't crash the host on invalid commands
  scsi: ipr: System hung while dlpar adding primary ipr adapter back
  scsi: target: iscsi: Use bin2hex instead of a re-implementation
  scsi: target: iscsi: Use hex2bin instead of a re-implementation
  scsi: lpfc: Synchronize access to remoteport via rport
  scsi: ufs: Disable blk-mq for now
  scsi: sd: Contribute to randomness when running rotational device
  scsi: ibmvscsis: Ensure partition name is properly NUL terminated
  scsi: ibmvscsis: Fix a stringop-overflow warning

6 years agoMerge tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Greg Kroah-Hartman [Tue, 25 Sep 2018 15:54:55 +0000 (17:54 +0200)]
Merge tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

I wrote:
  "USB fixes for 4.19-rc6

   Here are some small USB core and driver fixes for reported issues for
   4.19-rc6.

   The most visible is the oops fix for when the USB core is built into the
   kernel that is present in 4.18.  Turns out not many people actually do
   that so it went unnoticed for a while.  The rest is some tiny typec,
   musb, and other core fixes.

   All have been in linux-next with no reported issues."

* tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: mux: Take care of driver module reference counting
  usb: core: safely deal with the dynamic quirk lists
  usb: roles: Take care of driver module reference counting
  USB: handle NULL config in usb_find_alt_setting()
  USB: fix error handling in usb_driver_claim_interface()
  USB: remove LPM management from usb_driver_claim_interface()
  USB: usbdevfs: restore warning for nonsensical flags
  USB: usbdevfs: sanitize flags more
  Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"
  usb: musb: dsps: do not disable CPPI41 irq in driver teardown

6 years agoMerge tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Greg Kroah-Hartman [Tue, 25 Sep 2018 15:22:50 +0000 (17:22 +0200)]
Merge tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

I wrote:
  "TTY/Serial driver fixes for 4.19-rc6

   Here are a number of small tty and serial driver fixes for reported
   issues for 4.19-rc6.

   One should hopefully resolve a much-reported issue that syzbot has found
   in the tty layer.  Although there are still more issues there, getting
   this fixed is nice to see finally happen.

   All of these have been in linux-next for a while with no reported
   issues."

* tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: imx: restore handshaking irq for imx1
  tty: vt_ioctl: fix potential Spectre v1
  tty: Drop tty->count on tty_reopen() failure
  serial: cpm_uart: return immediately from console poll
  tty: serial: lpuart: avoid leaking struct tty_struct
  serial: mvebu-uart: Fix reporting of effective CSIZE to userspace

6 years agoMerge tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
Greg Kroah-Hartman [Tue, 25 Sep 2018 15:01:52 +0000 (17:01 +0200)]
Merge tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Greg (well I), wrote:
  "Char/Misc driver fixes for 4.19-rc6

   Here are some soundwire and intel_th (tracing) driver fixes for some
   reported issues.

   All of these have been in linux-next for a week with no reported issues."

* tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Ice Lake PCH support
  intel_th: Fix resource handling for ACPI glue layer
  intel_th: Fix device removal logic
  soundwire: Fix acquiring bus lock twice during master release
  soundwire: Fix incorrect exit after configuring stream
  soundwire: Fix duplicate stream state assignment

6 years agoRevert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name"
Lubomir Rintel [Mon, 24 Sep 2018 12:18:34 +0000 (13:18 +0100)]
Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name"

This changes UAPI, breaking iwd and libell:

  ell/key.c: In function 'kernel_dh_compute':
  ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
    struct keyctl_dh_params params = { .private = private,
                                        ^~~~~~~
                                        dh_private

This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8.

Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoMerge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net
Greg Kroah-Hartman [Tue, 25 Sep 2018 09:19:28 +0000 (11:19 +0200)]
Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net

Dave writes:
  "Networking fixes:

  1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
     Abreu.

   2) Fix memory corruption in NFC, from Suren Baghdasaryan.

   3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.

   4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.

   5) Fix TX done race in mvpp2, from Antoine Tenart.

   6) ipv6 metrics leak, from Wei Wang.

   7) Adjust firmware version requirements in mlxsw, from Petr Machata.

   8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.

   9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
      Barnhill.

   10) Fix double free in devlink, from Dan Carpenter.

   11) Fix ethtool regression from UFO feature removal, from Maciej
       Żenczykowski.

   12) Fix drivers that have a ndo_poll_controller() that captures the
       cpu entirely on loaded hosts by trying to drain all rx and tx
       queues, from Eric Dumazet.

   13) Fix memory corruption with jumbo frames in aquantia driver, from
       Friedemann Gerold."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
  net: mvneta: fix the remaining Rx descriptor unmapping issues
  ip_tunnel: be careful when accessing the inner header
  mpls: allow routes on ip6gre devices
  net: aquantia: memory corruption on jumbo frames
  tun: remove ndo_poll_controller
  nfp: remove ndo_poll_controller
  bnxt: remove ndo_poll_controller
  bnx2x: remove ndo_poll_controller
  mlx5: remove ndo_poll_controller
  mlx4: remove ndo_poll_controller
  i40evf: remove ndo_poll_controller
  ice: remove ndo_poll_controller
  igb: remove ndo_poll_controller
  ixgb: remove ndo_poll_controller
  fm10k: remove ndo_poll_controller
  ixgbevf: remove ndo_poll_controller
  ixgbe: remove ndo_poll_controller
  bonding: use netpoll_poll_dev() helper
  netpoll: make ndo_poll_controller() optional
  rds: Fix build regression.
  ...

6 years agonet: mvneta: fix the remaining Rx descriptor unmapping issues
Antoine Tenart [Mon, 24 Sep 2018 14:56:13 +0000 (16:56 +0200)]
net: mvneta: fix the remaining Rx descriptor unmapping issues

With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in
various places of the mvneta driver, for example when putting down an
interface while traffic is passing through.

The issue is when using s/w buffer management, the Rx buffers are mapped
using dma_map_page but unmapped with dma_unmap_single. This patch fixes
this by using the right unmapping function.

Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoip_tunnel: be careful when accessing the inner header
Paolo Abeni [Mon, 24 Sep 2018 13:48:19 +0000 (15:48 +0200)]
ip_tunnel: be careful when accessing the inner header

Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agompls: allow routes on ip6gre devices
Saif Hasan [Fri, 21 Sep 2018 21:30:05 +0000 (14:30 -0700)]
mpls: allow routes on ip6gre devices

Summary:

This appears to be necessary and sufficient change to enable `MPLS` on
`ip6gre` tunnels (RFC4023).

This diff allows IP6GRE devices to be recognized by MPLS kernel module
and hence user can configure interface to accept packets with mpls
headers as well setup mpls routes on them.

Test Plan:

Test plan consists of multiple containers connected via GRE-V6 tunnel.
Then carrying out testing steps as below.

- Carry out necessary sysctl settings on all containers

```
sysctl -w net.mpls.platform_labels=65536
sysctl -w net.mpls.ip_ttl_propagate=1
sysctl -w net.mpls.conf.lo.input=1
```

- Establish IP6GRE tunnels

```
ip -6 tunnel add name if_1_2_1 mode ip6gre \
  local 2401:db00:21:6048:feed:0::1 \
  remote 2401:db00:21:6048:feed:0::2 key 1
ip link set dev if_1_2_1 up
sysctl -w net.mpls.conf.if_1_2_1.input=1
ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link

ip -6 tunnel add name if_1_3_1 mode ip6gre \
  local 2401:db00:21:6048:feed:0::1 \
  remote 2401:db00:21:6048:feed:0::3 key 1
ip link set dev if_1_3_1 up
sysctl -w net.mpls.conf.if_1_3_1.input=1
ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link
```

- Install MPLS encap rules on node-1 towards node-2

```
ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \
  via inet 169.254.0.3 dev if_1_2_1
```

- Install MPLS forwarding rules on node-2 and node-3
```
// node2
ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1

// node3
ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1
```

- Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing
  towards 192.168.0.1 is via IP route directly towards node1 from node4)
```
ping 192.168.0.11
```

- tcpdump on interface to capture ping packets wrapped within MPLS
  header which inturn wrapped within IP6GRE header

```
16:43:41.121073 IP6
  2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2:
  DSTOPT GREv0, key=0x1, length 100:
  MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255)
  IP 192.168.0.1 > 192.168.0.11:
  ICMP echo request, id 1208, seq 45, length 64

0x0000:  6000 2cdb 006c 3c3f 2401 db00 0021 6048  `.,..l<?$....!`H
0x0010:  feed 0000 0000 0001 2401 db00 0021 6048  ........$....!`H
0x0020:  feed 0000 0000 0002 2f00 0401 0401 0100  ......../.......
0x0030:  2000 8847 0000 0001 0002 00ff 0004 01ff  ...G............
0x0040:  4500 0054 3280 4000 ff01 c7cb c0a8 0001  E..T2.@.........
0x0050:  c0a8 000b 0800 a8d7 04b8 002d 2d3c a05b  ...........--<.[
0x0060:  0000 0000 bcd8 0100 0000 0000 1011 1213  ................
0x0070:  1415 1617 1819 1a1b 1c1d 1e1f 2021 2223  .............!"#
0x0080:  2425 2627 2829 2a2b 2c2d 2e2f 3031 3233  $%&'()*+,-./0123
0x0090:  3435 3637                                4567
```

Signed-off-by: Saif Hasan <has@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Mon, 24 Sep 2018 17:08:45 +0000 (10:08 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-09-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Several fixes for BPF sockmap to only allow sockets being attached in
   ESTABLISHED state, from John.

2) Fix up the license to LGPL/BSD for the libc compat header which contains
   fallback helpers that libbpf and bpftool is using, from Jakub.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Greg Kroah-Hartman [Mon, 24 Sep 2018 13:16:41 +0000 (15:16 +0200)]
Merge tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Mauro briefly writes:
  "media fixes for v4.19-rc5

   some drivers and Kbuild fixes"

* tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: platform: fix cros-ec-cec build error
  media: staging/media/mt9t031/Kconfig: remove bogus entry
  media: i2c: mt9v111: Fix v4l2-ctrl error handling
  media: camss: add missing includes
  media: camss: Use managed memory allocations
  media: camss: mark PM functions as __maybe_unused
  media: af9035: prevent buffer overflow on write
  media: video_function_calls.rst: drop obsolete video-set-attributes reference

6 years agonet: aquantia: memory corruption on jumbo frames
Friedemann Gerold [Sat, 15 Sep 2018 15:03:39 +0000 (18:03 +0300)]
net: aquantia: memory corruption on jumbo frames

This patch fixes skb_shared area, which will be corrupted
upon reception of 4K jumbo packets.

Originally build_skb usage purpose was to reuse page for skb to eliminate
needs of extra fragments. But that logic does not take into account that
skb_shared_info should be reserved at the end of skb data area.

In case packet data consumes all the page (4K), skb_shinfo location
overflows the page. As a consequence, __build_skb zeroed shinfo data above
the allocated page, corrupting next page.

The issue is rarely seen in real life because jumbo are normally larger
than 4K and that causes another code path to trigger.
But it 100% reproducible with simple scapy packet, like:

    sendp(IP(dst="192.168.100.3") / TCP(dport=443) \
          / Raw(RandString(size=(4096-40))), iface="enp1s0")

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Friedemann Gerold <f.gerold@b-c-s.de>
Reported-by: Michael Rauch <michael@rauch.be>
Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'netpoll-avoid-capture-effects-for-NAPI-drivers'
David S. Miller [Mon, 24 Sep 2018 04:55:26 +0000 (21:55 -0700)]
Merge branch 'netpoll-avoid-capture-effects-for-NAPI-drivers'

Eric Dumazet says:

====================
netpoll: avoid capture effects for NAPI drivers

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC).

This capture, showing one ksoftirqd eating all cycles
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller() :

Most NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.

This patch series take care of the first round, we will
handle other drivers in future rounds.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotun: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:52 +0000 (15:27 -0700)]
tun: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

tun uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonfp: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:51 +0000 (15:27 -0700)]
nfp: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

nfp uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agobnxt: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:50 +0000 (15:27 -0700)]
bnxt: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

bnxt uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agobnx2x: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:49 +0000 (15:27 -0700)]
bnx2x: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

bnx2x uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlx5: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:48 +0000 (15:27 -0700)]
mlx5: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

mlx5 uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlx4: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:47 +0000 (15:27 -0700)]
mlx4: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

mlx4 uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoi40evf: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:46 +0000 (15:27 -0700)]
i40evf: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

i40evf uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoice: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:45 +0000 (15:27 -0700)]
ice: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ice uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoigb: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:44 +0000 (15:27 -0700)]
igb: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

igb uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoixgb: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:43 +0000 (15:27 -0700)]
ixgb: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ixgb uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

This also removes a problematic use of disable_irq() in
a context it is forbidden, as explained in commit
af3e0fcf7887 ("8139too: Use disable_irq_nosync() in
rtl8139_poll_controller()")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agofm10k: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:42 +0000 (15:27 -0700)]
fm10k: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
lasts for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

fm10k uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoixgbevf: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:41 +0000 (15:27 -0700)]
ixgbevf: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ixgbevf uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoixgbe: remove ndo_poll_controller
Eric Dumazet [Fri, 21 Sep 2018 22:27:40 +0000 (15:27 -0700)]
ixgbe: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

ixgbe uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.

Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agobonding: use netpoll_poll_dev() helper
Eric Dumazet [Fri, 21 Sep 2018 22:27:39 +0000 (15:27 -0700)]
bonding: use netpoll_poll_dev() helper

We want to allow NAPI drivers to no longer provide
ndo_poll_controller() method, as it has been proven problematic.

team driver must not look at its presence, but instead call
netpoll_poll_dev() which factorize the needed actions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonetpoll: make ndo_poll_controller() optional
Eric Dumazet [Fri, 21 Sep 2018 22:27:38 +0000 (15:27 -0700)]
netpoll: make ndo_poll_controller() optional

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller().

NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.

This patch allows netpoll_poll_dev() to process NAPI
contexts even for drivers not providing ndo_poll_controller(),
allowing for following patches in NAPI drivers.

Also we export netpoll_poll_dev() so that it can be called
by bonding/team drivers in following patches.

Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agords: Fix build regression.
David S. Miller [Sun, 23 Sep 2018 19:25:15 +0000 (12:25 -0700)]
rds: Fix build regression.

Use DECLARE_* not DEFINE_*

Fixes: 8360ed6745df ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats")
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoLinux 4.19-rc5
Greg Kroah-Hartman [Sun, 23 Sep 2018 17:15:18 +0000 (19:15 +0200)]
Linux 4.19-rc5

6 years agoMerge tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Greg Kroah-Hartman [Sun, 23 Sep 2018 15:19:27 +0000 (17:19 +0200)]
Merge tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Lee writes:
  "MFD fixes for v4.19
   - Fix Dialog DA9063 regulator constraints issue causing failure in
     probe
   - Fix OMAP Device Tree compatible strings to match DT"

* tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: omap-usb-host: Fix dts probe of children
  mfd: da9063: Fix DT probing with constraints

6 years agoMerge tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Sun, 23 Sep 2018 11:32:19 +0000 (13:32 +0200)]
Merge tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Juergen writes:
  "xen:
   Two small fixes for xen drivers."

* tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: issue warning message when out of grant maptrack entries
  xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code

6 years agoMerge tag 'for-linus-20180922' of git://git.kernel.dk/linux-block
Greg Kroah-Hartman [Sun, 23 Sep 2018 06:33:28 +0000 (08:33 +0200)]
Merge tag 'for-linus-20180922' of git://git.kernel.dk/linux-block

Jens writes:
  "Just a single fix in this pull request, fixing a regression in
  /proc/diskstats caused by the unification of timestamps."

* tag 'for-linus-20180922' of git://git.kernel.dk/linux-block:
  block: use nanosecond resolution for iostat

6 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Sun, 23 Sep 2018 06:10:12 +0000 (08:10 +0200)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Thomas writes:
  "A set of fixes for x86:

   - Resolve the kvmclock regression on AMD systems with memory
     encryption enabled. The rework of the kvmclock memory allocation
     during early boot results in encrypted storage, which is not
     shareable with the hypervisor. Create a new section for this data
     which is mapped unencrypted and take care that the later
     allocations for shared kvmclock memory is unencrypted as well.

   - Fix the build regression in the paravirt code introduced by the
     recent spectre v2 updates.

   - Ensure that the initial static page tables cover the fixmap space
     correctly so early console always works. This worked so far by
     chance, but recent modifications to the fixmap layout can -
     depending on kernel configuration - move the relevant entries to a
     different place which is not covered by the initial static page
     tables.

   - Address the regressions and issues which got introduced with the
     recent extensions to the Intel Recource Director Technology code.

   - Update maintainer entries to document reality"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Expand static page table for fixmap space
  MAINTAINERS: Add X86 MM entry
  x86/intel_rdt: Add Reinette as co-maintainer for RDT
  MAINTAINERS: Add Borislav to the x86 maintainers
  x86/paravirt: Fix some warning messages
  x86/intel_rdt: Fix incorrect loop end condition
  x86/intel_rdt: Fix exclusive mode handling of MBA resource
  x86/intel_rdt: Fix incorrect loop end condition
  x86/intel_rdt: Do not allow pseudo-locking of MBA resource
  x86/intel_rdt: Fix unchecked MSR access
  x86/intel_rdt: Fix invalid mode warning when multiple resources are managed
  x86/intel_rdt: Global closid helper to support future fixes
  x86/intel_rdt: Fix size reporting of MBA resource
  x86/intel_rdt: Fix data type in parsing callbacks
  x86/kvm: Use __bss_decrypted attribute in shared variables
  x86/mm: Add .bss..decrypted section to hold shared variables

6 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Sun, 23 Sep 2018 06:09:16 +0000 (08:09 +0200)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Thomas writes:
  "- Provide a strerror_r wrapper so lib/bpf can be built on systems
     without _GNU_SOURCE
   - Unbreak the man page generator when building out of tree"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf Documentation: Fix out-of-tree asciidoctor man page generation
  tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systems

6 years agoMerge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Greg Kroah-Hartman [Sun, 23 Sep 2018 06:06:54 +0000 (08:06 +0200)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Thomas writes:
  "Make the EFI arm stub device tree loader default on to unbreak
  existing EFI boot loaders which do not have DTB support."

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to y

6 years agonet-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN
Maciej Żenczykowski [Sat, 22 Sep 2018 08:34:01 +0000 (01:34 -0700)]
net-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN

So it should not fail with EPERM even though it is no longer implemented...

This is a fix for:
  (userns)$ egrep ^Cap /proc/self/status
  CapInh: 0000003fffffffff
  CapPrm: 0000003fffffffff
  CapEff: 0000003fffffffff
  CapBnd: 0000003fffffffff
  CapAmb: 0000003fffffffff

  (userns)$ tcpdump -i usb_rndis0
  tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted
  Warning: Kernel filter failed: Bad file descriptor
  tcpdump: can't remove kernel filter: Bad file descriptor

With this change it returns EOPNOTSUPP instead of EPERM.

See also https://github.com/the-tcpdump-group/libpcap/issues/689

Fixes: 08a00fea6de2 "net: Remove references to NETIF_F_UFO from ethtool."
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoRDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats
Nathan Chancellor [Fri, 21 Sep 2018 18:04:51 +0000 (11:04 -0700)]
RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats

Clang warns when two declarations' section attributes don't match.

net/rds/ib_stats.c:40:1: warning: section does not match previous
declaration [-Wsection]
DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats);
^
./include/linux/percpu-defs.h:142:2: note: expanded from macro
'DEFINE_PER_CPU_SHARED_ALIGNED'
        DEFINE_PER_CPU_SECTION(type, name,
PER_CPU_SHARED_ALIGNED_SECTION) \
        ^
./include/linux/percpu-defs.h:93:9: note: expanded from macro
'DEFINE_PER_CPU_SECTION'
        extern __PCPU_ATTRS(sec) __typeof__(type) name;
\
               ^
./include/linux/percpu-defs.h:49:26: note: expanded from macro
'__PCPU_ATTRS'
        __percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))
\
                                ^
net/rds/ib.h:446:1: note: previous attribute is here
DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats);
^
./include/linux/percpu-defs.h:111:2: note: expanded from macro
'DECLARE_PER_CPU'
        DECLARE_PER_CPU_SECTION(type, name, "")
        ^
./include/linux/percpu-defs.h:87:9: note: expanded from macro
'DECLARE_PER_CPU_SECTION'
        extern __PCPU_ATTRS(sec) __typeof__(type) name
               ^
./include/linux/percpu-defs.h:49:26: note: expanded from macro
'__PCPU_ATTRS'
        __percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))
\
                                ^
1 warning generated.

The initial definition was added in commit ec16227e1414 ("RDS/IB:
Infiniband transport") and the cache aligned definition was added in
commit e6babe4cc4ce ("RDS/IB: Stats and sysctls") right after. The
definition probably should have been updated in net/rds/ib.h, which is
what this patch does.

Link: https://github.com/ClangBuiltLinux/linux/issues/114
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoblock: use nanosecond resolution for iostat
Omar Sandoval [Fri, 21 Sep 2018 23:44:34 +0000 (16:44 -0700)]
block: use nanosecond resolution for iostat

Klaus Kusche reported that the I/O busy time in /proc/diskstats was not
updating properly on 4.18. This is because we started using ktime to
track elapsed time, and we convert nanoseconds to jiffies when we update
the partition counter. However, this gets rounded down, so any I/Os that
take less than a jiffy are not accounted for. Previously in this case,
the value of jiffies would sometimes increment while we were doing I/O,
so at least some I/Os were accounted for.

Let's convert the stats to use nanoseconds internally. We still report
milliseconds as before, now more accurately than ever. The value is
still truncated to 32 bits for backwards compatibility.

Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields")
Cc: stable@vger.kernel.org
Reported-by: Klaus Kusche <klaus.kusche@computerix.info>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
6 years agonet/mlx4: Use cpumask_available for eq->affinity_mask
Nathan Chancellor [Fri, 21 Sep 2018 09:44:12 +0000 (02:44 -0700)]
net/mlx4: Use cpumask_available for eq->affinity_mask

Clang warns that the address of a pointer will always evaluated as true
in a boolean context:

drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of
array 'eq->affinity_mask' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
            ~~~~~^~~~~~~~~~~~~
1 warning generated.

Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add
helper cpumask_available()"), which does the proper checking and avoids
this warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/86
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodevlink: double free in devlink_resource_fill()
Dan Carpenter [Fri, 21 Sep 2018 08:07:55 +0000 (11:07 +0300)]
devlink: double free in devlink_resource_fill()

Smatch reports that devlink_dpipe_send_and_alloc_skb() frees the skb
on error so this is a double free.  We fixed a bunch of these bugs in
commit 7fe4d6dcbcb4 ("devlink: Remove redundant free on error path") but
we accidentally overlooked this one.

Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: apple: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 03:46:37 +0000 (11:46 +0800)]
net: apple: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: i825xx: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 03:44:05 +0000 (11:44 +0800)]
net: i825xx: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: wiznet: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 03:35:11 +0000 (11:35 +0800)]
net: wiznet: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: sgi: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 03:05:50 +0000 (11:05 +0800)]
net: sgi: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: cirrus: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 03:02:37 +0000 (11:02 +0800)]
net: cirrus: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: seeq: fix return type of ndo_start_xmit function
YueHaibing [Fri, 21 Sep 2018 02:53:47 +0000 (10:53 +0800)]
net: seeq: fix return type of ndo_start_xmit function

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoPCI: hv: Fix return value check in hv_pci_assign_slots()
Wei Yongjun [Fri, 21 Sep 2018 02:53:17 +0000 (02:53 +0000)]
PCI: hv: Fix return value check in hv_pci_assign_slots()

In case of error, the function pci_create_slot() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().

Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/ipv6: Display all addresses in output of /proc/net/if_inet6
Jeff Barnhill [Fri, 21 Sep 2018 00:45:27 +0000 (00:45 +0000)]
net/ipv6: Display all addresses in output of /proc/net/if_inet6

The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly
handle starting/stopping the iteration.  The problem is that at some point
during the iteration, an overflow is detected and the process is
subsequently stopped.  The item being shown via seq_printf() when the
overflow occurs is not actually shown, though.  When start() is
subsequently called to resume iterating, it returns the next item, and
thus the item that was being processed when the overflow occurred never
gets printed.

Alter the meaning of the private data member "offset".  Currently, when it
is not 0 (which only happens at the very beginning), "offset" represents
the next hlist item to be printed.  After this change, "offset" always
represents the current item.

This is also consistent with the private data member "bucket", which
represents the current bucket, and also the use of "pos" as defined in
seq_file.txt:
    The pos passed to start() will always be either zero, or the most
    recent pos used in the previous session.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonetlabel: check for IPV4MASK in addrinfo_get
Sean Tranchetti [Thu, 20 Sep 2018 20:29:45 +0000 (14:29 -0600)]
netlabel: check for IPV4MASK in addrinfo_get

netlbl_unlabel_addrinfo_get() assumes that if it finds the
NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the
NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is
not necessarily the case as the current checks in
netlbl_unlabel_staticadd() and friends are not sufficent to
enforce this.

If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR,
NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes,
these functions will all call netlbl_unlabel_addrinfo_get() which
will then attempt dereference NULL when fetching the non-existent
NLBL_UNLABEL_A_IPV4MASK attribute:

Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
netlbl_unlabel_addrinfo_get+0x44/0xd8
netlbl_unlabel_staticremovedef+0x98/0xe0
genl_rcv_msg+0x354/0x388
netlink_rcv_skb+0xac/0x118
genl_rcv+0x34/0x48
netlink_unicast+0x158/0x1f0
netlink_sendmsg+0x32c/0x338
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Code: 51001149 7100113f 540000a0 f9401508 (79400108)
---[ end trace f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'bpf-sockmap-estab-fixes'
Daniel Borkmann [Sat, 22 Sep 2018 00:46:42 +0000 (02:46 +0200)]
Merge branch 'bpf-sockmap-estab-fixes'

John Fastabend says:

====================
Eric noted that using the close callback is not sufficient
to catch all transitions from ESTABLISHED state to a LISTEN
state. So this series does two things. First, only allow
adding socks in ESTABLISH state and second use unhash callback
to catch tcp_disconnect() transitions.

v2: added check for ESTABLISH state in hash update sockmap as well
v3: Do not release lock from unhash in error path, no lock was
    used in the first place. And drop not so useful code comments
v4: convert,
if (unhash()) return unhash(); return
     to if (unhash()) unhash(); return;

Thanks for reviewing Yonghong I carried your ACKs forward.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
6 years agobpf: test_maps, only support ESTABLISHED socks
John Fastabend [Tue, 18 Sep 2018 16:01:54 +0000 (09:01 -0700)]
bpf: test_maps, only support ESTABLISHED socks

Ensure that sockets added to a sock{map|hash} that is not in the
ESTABLISHED state is rejected.

Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
6 years agobpf: sockmap, fix transition through disconnect without close
John Fastabend [Tue, 18 Sep 2018 16:01:49 +0000 (09:01 -0700)]
bpf: sockmap, fix transition through disconnect without close

It is possible (via shutdown()) for TCP socks to go trough TCP_CLOSE
state via tcp_disconnect() without actually calling tcp_close which
would then call our bpf_tcp_close() callback. Because of this a user
could disconnect a socket then put it in a LISTEN state which would
break our assumptions about sockets always being ESTABLISHED state.

To resolve this rely on the unhash hook, which is called in the
disconnect case, to remove the sock from the sockmap.

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
6 years agobpf: sockmap only allow ESTABLISHED sock state
John Fastabend [Tue, 18 Sep 2018 16:01:44 +0000 (09:01 -0700)]
bpf: sockmap only allow ESTABLISHED sock state

After this patch we only allow socks that are in ESTABLISHED state or
are being added via a sock_ops event that is transitioning into an
ESTABLISHED state. By allowing sock_ops events we allow users to
manage sockmaps directly from sock ops programs. The two supported
sock_ops ops are BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB and
BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB.

Similar to TLS ULP this ensures sk_user_data is correct.

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
6 years agoMerge tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Greg Kroah-Hartman [Fri, 21 Sep 2018 18:01:16 +0000 (20:01 +0200)]
Merge tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Linus writes:
  "Pin control fixes for v4.19:
   - Two fixes for the Intel pin controllers than cause
     problems on laptops."

* tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Do pin translation in other GPIO operations as well
  pinctrl: cannonlake: Fix gpio base for GPP-E

6 years agoscsi: sd: don't crash the host on invalid commands
Johannes Thumshirn [Fri, 21 Sep 2018 07:01:01 +0000 (09:01 +0200)]
scsi: sd: don't crash the host on invalid commands

When sd_init_command() get's a command with a unknown req_op() it crashes the
system via BUG().

This makes debugging the actual reason for the broken request cmd_flags pretty
hard as the system is down before it's able to write out debugging data on the
serial console or the trace buffer.

Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and
return an I/O error to the producer of the request.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: ipr: System hung while dlpar adding primary ipr adapter back
Wen Xiong [Fri, 21 Sep 2018 00:32:12 +0000 (19:32 -0500)]
scsi: ipr: System hung while dlpar adding primary ipr adapter back

While dlpar adding primary ipr adapter back, driver goes through adapter
initialization then schedule ipr_worker_thread to start te disk scan by
dropping the host lock, calling scsi_add_device.  Then get the adapter reset
request again, so driver does scsi_block_requests, this will cause the
scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread
to do the unblock because its stuck in scsi_add_device.

This patch fixes the issue.

[mkp: typo and whitespace fixes]

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: target: iscsi: Use bin2hex instead of a re-implementation
Vincent Pelletier [Sun, 9 Sep 2018 04:09:27 +0000 (04:09 +0000)]
scsi: target: iscsi: Use bin2hex instead of a re-implementation

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: target: iscsi: Use hex2bin instead of a re-implementation
Vincent Pelletier [Sun, 9 Sep 2018 04:09:26 +0000 (04:09 +0000)]
scsi: target: iscsi: Use hex2bin instead of a re-implementation

This change has the following effects, in order of descreasing importance:

1) Prevent a stack buffer overflow

2) Do not append an unnecessary NULL to an anyway binary buffer, which
   is writing one byte past client_digest when caller is:
   chap_string_to_hex(client_digest, chap_r, strlen(chap_r));

The latter was found by KASAN (see below) when input value hes expected size
(32 hex chars), and further analysis revealed a stack buffer overflow can
happen when network-received value is longer, allowing an unauthenticated
remote attacker to smash up to 17 bytes after destination buffer (16 bytes
attacker-controlled and one null).  As switching to hex2bin requires
specifying destination buffer length, and does not internally append any null,
it solves both issues.

This addresses CVE-2018-14633.

Beyond this:

- Validate received value length and check hex2bin accepted the input, to log
  this rejection reason instead of just failing authentication.

- Only log received CHAP_R and CHAP_C values once they passed sanity checks.

==================================================================
BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021

CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G           O      4.17.8kasan.sess.connops+ #2
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014
Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod]
Call Trace:
 dump_stack+0x71/0xac
 print_address_description+0x65/0x22e
 ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
 kasan_report.cold.6+0x241/0x2fd
 chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
 chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod]
 ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod]
 ? ftrace_caller_op_ptr+0xe/0xe
 ? __orc_find+0x6f/0xc0
 ? unwind_next_frame+0x231/0x850
 ? kthread+0x1a0/0x1c0
 ? ret_from_fork+0x35/0x40
 ? ret_from_fork+0x35/0x40
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? deref_stack_reg+0xd0/0xd0
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? is_module_text_address+0xa/0x11
 ? kernel_text_address+0x4c/0x110
 ? __save_stack_trace+0x82/0x100
 ? ret_from_fork+0x35/0x40
 ? save_stack+0x8c/0xb0
 ? 0xffffffffc1660000
 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod]
 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? process_one_work+0x35c/0x640
 ? worker_thread+0x66/0x5d0
 ? kthread+0x1a0/0x1c0
 ? ret_from_fork+0x35/0x40
 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod]
 ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod]
 chap_main_loop+0x172/0x570 [iscsi_target_mod]
 ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod]
 ? rx_data+0xd6/0x120 [iscsi_target_mod]
 ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod]
 ? cyc2ns_read_begin.part.2+0x90/0x90
 ? _raw_spin_lock_irqsave+0x25/0x50
 ? memcmp+0x45/0x70
 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod]
 ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod]
 ? del_timer+0xe0/0xe0
 ? memset+0x1f/0x40
 ? flush_sigqueue+0x29/0xd0
 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
 ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod]
 ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod]
 process_one_work+0x35c/0x640
 worker_thread+0x66/0x5d0
 ? flush_rcu_work+0x40/0x40
 kthread+0x1a0/0x1c0
 ? kthread_bind+0x30/0x30
 ret_from_fork+0x35/0x40

The buggy address belongs to the page:
page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17fffc000000000()
raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00
 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00
>ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00
                                              ^
 ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2
 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00
==================================================================

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agonet: mscc: fix the frame extraction into the skb
Antoine Tenart [Thu, 20 Sep 2018 10:08:54 +0000 (12:08 +0200)]
net: mscc: fix the frame extraction into the skb

When extracting frames from the Ocelot switch, the frame check sequence
(FCS) is present at the end of the data extracted. The FCS was put into
the sk buffer which introduced some issues (as length related ones), as
the FCS shouldn't be part of an Rx sk buffer.

This patch fixes the Ocelot switch extraction behaviour by discarding
the FCS.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Greg Kroah-Hartman [Fri, 21 Sep 2018 14:21:42 +0000 (16:21 +0200)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Paolo writes:
  "It's mostly small bugfixes and cleanups, mostly around x86 nested
   virtualization.  One important change, not related to nested
   virtualization, is that the ability for the guest kernel to trap
   CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
   now masked by default.  This is because the feature is detected
   through an MSR; a very bad idea that Intel seems to like more and
   more.  Some applications choke if the other fields of that MSR are
   not initialized as on real hardware, hence we have to disable the
   whole MSR by default, as was the case before Linux 4.12."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
  KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
  kvm: selftests: Add platform_info_test
  KVM: x86: Control guest reads of MSR_PLATFORM_INFO
  KVM: x86: Turbo bits in MSR_PLATFORM_INFO
  nVMX x86: Check VPID value on vmentry of L2 guests
  nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
  KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
  KVM: VMX: check nested state and CR4.VMXE against SMM
  kvm: x86: make kvm_{load|put}_guest_fpu() static
  x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
  KVM: VMX: use preemption timer to force immediate VMExit
  KVM: VMX: modify preemption timer bit only when arming timer
  KVM: VMX: immediately mark preemption timer expired only for zero value
  KVM: SVM: Switch to bitmap_zalloc()
  KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
  kvm: selftests: use -pthread instead of -lpthread
  KVM: x86: don't reset root in kvm_mmu_setup()
  kvm: mmu: Don't read PDPTEs when paging is not enabled
  x86/kvm/lapic: always disable MMIO interface in x2APIC mode
  KVM: s390: Make huge pages unavailable in ucontrol VMs
  ...

6 years agoMerge tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs
Greg Kroah-Hartman [Fri, 21 Sep 2018 13:29:44 +0000 (15:29 +0200)]
Merge tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs

Richard writes:
  "This pull request contains fixes for UBIFS:
   - A wrong UBIFS assertion in mount code
   - Fix for a NULL pointer deref in mount code
   - Revert of a bad fix for xattrs"

* tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs:
  Revert "ubifs: xattr: Don't operate on deleted inodes"
  ubifs: drop false positive assertion
  ubifs: Check for name being NULL while mounting

6 years agoMerge tag 'for-linus-20180920' of git://git.kernel.dk/linux-block
Greg Kroah-Hartman [Fri, 21 Sep 2018 07:41:05 +0000 (09:41 +0200)]
Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-block

Jens writes:
  "Storage fixes for 4.19-rc5

  - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft)

  - NVMe pull request from Christoph, and a single ANA log page fix
    (Hannes)

  - Regression fix for libata qd32 support, where we trigger an illegal
    active command transition. This fixes a CD-ROM detection issue that
    was reported, but could also trigger premature completion of the
    internal tag (me)"

* tag 'for-linus-20180920' of git://git.kernel.dk/linux-block:
  floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
  libata: mask swap internal and hardware tag
  nvme: count all ANA groups for ANA Log page

6 years agoMerge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm
Greg Kroah-Hartman [Fri, 21 Sep 2018 07:11:18 +0000 (09:11 +0200)]
Merge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm

David writes:
  "drm fixes for 4.19-rc5:

   - core: fix debugfs for atomic, fix the check for atomic for
     non-modesetting drivers
   - amdgpu: adds a new PCI id, some kfd fixes and a sdma fix
   - i915: a bunch of GVT fixes.
   - vc4: scaling fix
   - vmwgfx: modesetting fixes and a old buffer eviction fix
   - udl: framebuffer destruction fix
   - sun4i: disable on R40 fix until next kernel
   - pl111: NULL termination on table fix"

* tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs
  drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9
  drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
  drm/vmwgfx: Fix buffer object eviction
  drm/vmwgfx: Don't impose STDU limits on framebuffer size
  drm/vmwgfx: limit mode size for all display unit to texture_max
  drm/vmwgfx: limit screen size to stdu_max during check_modeset
  drm/vmwgfx: don't check for old_crtc_state enable status
  drm/amdgpu: add new polaris pci id
  drm: sun4i: drop second PLL from A64 HDMI PHY
  drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers.
  drm/i915/gvt: clear ggtt entries when destroy vgpu
  drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid
  drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler
  drm/i915/gvt: Init PHY related registers for BXT
  drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
  drm/fb-helper: Remove set but not used variable 'connector_funcs'
  drm: udl: Destroy framebuffer only if it was initialized
  drm/sun4i: Remove R40 display pipeline compatibles
  drm/pl111: Make sure of_device_id tables are NULL terminated
  ...

6 years agor8169: fix autoneg issue on resume with RTL8168E
Heiner Kallweit [Thu, 20 Sep 2018 20:47:09 +0000 (22:47 +0200)]
r8169: fix autoneg issue on resume with RTL8168E

It was reported that chip version 33 (RTL8168E) ends up with
10MBit/Half on a 1GBit link after resuming from S3 (with different
link partners). For whatever reason the PHY on this chip doesn't
properly start a renegotiation when soft-reset.
Explicitly requesting a renegotiation fixes this.

Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Neil MacLeod <neil@nmacleod.com>
Tested-by: Neil MacLeod <neil@nmacleod.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoscsi: lpfc: Synchronize access to remoteport via rport
James Smart [Thu, 13 Sep 2018 22:41:10 +0000 (15:41 -0700)]
scsi: lpfc: Synchronize access to remoteport via rport

The driver currently uses the ndlp to get the local rport which is then used
to get the nvme transport remoteport pointer. There can be cases where a stale
remoteport pointer is obtained as synchronization isn't done through the
different dereferences.

Correct by using locks to synchronize the dereferences.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoscsi: ufs: Disable blk-mq for now
Adrian Hunter [Thu, 13 Sep 2018 11:28:48 +0000 (14:28 +0300)]
scsi: ufs: Disable blk-mq for now

blk-mq does not support runtime pm, so disable blk-mq support for now.

Fixes: d5038a13eca7 ("scsi: core: switch to scsi-mq by default")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
6 years agoMerge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 20 Sep 2018 23:52:21 +0000 (09:52 +1000)]
Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

A few fixes for 4.19:
- Add a new polaris pci id
- KFD fixes for raven and gfx7

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920155850.5455-1-alexander.deucher@amd.com
6 years agoMerge branch 'vmwgfx-fixes-4.19' of git://people.freedesktop.org/~thomash/linux into...
Dave Airlie [Thu, 20 Sep 2018 23:50:46 +0000 (09:50 +1000)]
Merge branch 'vmwgfx-fixes-4.19' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of modesetting fixes and a fix for a long-standing buffer-eviction
problem cc'd stable.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920063935.35492-1-thellstrom@vmware.com
6 years agox86/mm: Expand static page table for fixmap space
Feng Tang [Thu, 20 Sep 2018 02:58:28 +0000 (10:58 +0800)]
x86/mm: Expand static page table for fixmap space

We met a kernel panic when enabling earlycon, which is due to the fixmap
address of earlycon is not statically setup.

Currently the static fixmap setup in head_64.S only covers 2M virtual
address space, while it actually could be in 4M space with different
kernel configurations, e.g. when VSYSCALL emulation is disabled.

So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2,
and add a build time check to ensure that the fixmap is covered by the
initial static page tables.

Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts)
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com
6 years agoocfs2: fix ocfs2 read block panic
Junxiao Bi [Thu, 20 Sep 2018 19:22:51 +0000 (12:22 -0700)]
ocfs2: fix ocfs2 read block panic

While reading block, it is possible that io error return due to underlying
storage issue, in this case, BH_NeedsValidate was left in the buffer head.
Then when reading the very block next time, if it was already linked into
journal, that will trigger the following panic.

[203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342!
[203748.702533] invalid opcode: 0000 [#1] SMP
[203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod
[203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2
[203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
[203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000
[203748.703088] RIP: 0010:[<ffffffffa05e9f09>]  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.703130] RSP: 0018:ffff88006ff4b818  EFLAGS: 00010206
[203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000
[203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe
[203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0
[203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000
[203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000
[203748.705871] FS:  00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000
[203748.706370] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670
[203748.707124] Stack:
[203748.707371]  ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001
[203748.707885]  0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00
[203748.708399]  00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000
[203748.708915] Call Trace:
[203748.709175]  [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2]
[203748.709680]  [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2]
[203748.710185]  [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2]
[203748.710691]  [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2]
[203748.711204]  [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2]
[203748.711716]  [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2]
[203748.712227]  [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2]
[203748.712737]  [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2]
[203748.713003]  [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2]
[203748.713263]  [<ffffffff8121714b>] vfs_create+0xdb/0x150
[203748.713518]  [<ffffffff8121b225>] do_last+0x815/0x1210
[203748.713772]  [<ffffffff812192e9>] ? path_init+0xb9/0x450
[203748.714123]  [<ffffffff8121bca0>] path_openat+0x80/0x600
[203748.714378]  [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620
[203748.714634]  [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0
[203748.714888]  [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130
[203748.715143]  [<ffffffff81209ffc>] do_sys_open+0x12c/0x220
[203748.715403]  [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180
[203748.715668]  [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190
[203748.715928]  [<ffffffff8120a10e>] SyS_open+0x1e/0x20
[203748.716184]  [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7
[203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10
[203748.717505] RIP  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.717775]  RSP <ffff88006ff4b818>

Joesph ever reported a similar panic.
Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html
Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomm: slowly shrink slabs with a relatively small number of objects
Roman Gushchin [Thu, 20 Sep 2018 19:22:46 +0000 (12:22 -0700)]
mm: slowly shrink slabs with a relatively small number of objects

9092c71bb724 ("mm: use sc->priority for slab shrink targets") changed the
way that the target slab pressure is calculated and made it
priority-based:

    delta = freeable >> priority;
    delta *= 4;
    do_div(delta, shrinker->seeks);

The problem is that on a default priority (which is 12) no pressure is
applied at all, if the number of potentially reclaimable objects is less
than 4096 (1<<12).

This causes the last objects on slab caches of no longer used cgroups to
(almost) never get reclaimed.  It's obviously a waste of memory.

It can be especially painful, if these stale objects are holding a
reference to a dying cgroup.  Slab LRU lists are reparented on memcg
offlining, but corresponding objects are still holding a reference to the
dying cgroup.  If we don't scan these objects, the dying cgroup can't go
away.  Most likely, the parent cgroup hasn't any directly charged objects,
only remaining objects from dying children cgroups.  So it can easily hold
a reference to hundreds of dying cgroups.

If there are no big spikes in memory pressure, and new memory cgroups are
created and destroyed periodically, this causes the number of dying
cgroups grow steadily, causing a slow-ish and hard-to-detect memory
"leak".  It's not a real leak, as the memory can be eventually reclaimed,
but it could not happen in a real life at all.  I've seen hosts with a
steadily climbing number of dying cgroups, which doesn't show any signs of
a decline in months, despite the host is loaded with a production
workload.

It is an obvious waste of memory, and to prevent it, let's apply a minimal
pressure even on small shrinker lists.  E.g.  if there are freeable
objects, let's scan at least min(freeable, scan_batch) objects.

This fix significantly improves a chance of a dying cgroup to be
reclaimed, and together with some previous patches stops the steady growth
of the dying cgroups number on some of our hosts.

Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com
Fixes: 9092c71bb724 ("mm: use sc->priority for slab shrink targets")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agokernel/sys.c: remove duplicated include
YueHaibing [Thu, 20 Sep 2018 19:22:43 +0000 (12:22 -0700)]
kernel/sys.c: remove duplicated include

Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomm: shmem.c: Correctly annotate new inodes for lockdep
Joel Fernandes (Google) [Thu, 20 Sep 2018 19:22:39 +0000 (12:22 -0700)]
mm: shmem.c: Correctly annotate new inodes for lockdep

Directories and inodes don't necessarily need to be in the same lockdep
class.  For ex, hugetlbfs splits them out too to prevent false positives
in lockdep.  Annotate correctly after new inode creation.  If its a
directory inode, it will be put into a different class.

This should fix a lockdep splat reported by syzbot:

> ======================================================
> WARNING: possible circular locking dependency detected
> 4.18.0-rc8-next-20180810+ #36 Not tainted
> ------------------------------------------------------
> syz-executor900/4483 is trying to acquire lock:
00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock
> include/linux/fs.h:765 [inline]
00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at:
> shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>
> but task is already holding lock:
0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630
> drivers/staging/android/ashmem.c:448
>
> which lock already depends on the new lock.
>
> -> #2 (ashmem_mutex){+.+.}:
>        __mutex_lock_common kernel/locking/mutex.c:925 [inline]
>        __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
>        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
>        ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361
>        call_mmap include/linux/fs.h:1844 [inline]
>        mmap_region+0xf27/0x1c50 mm/mmap.c:1762
>        do_mmap+0xa10/0x1220 mm/mmap.c:1535
>        do_mmap_pgoff include/linux/mm.h:2298 [inline]
>        vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357
>        ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585
>        __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
>        __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline]
>        __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #1 (&mm->mmap_sem){++++}:
>        __might_fault+0x155/0x1e0 mm/memory.c:4568
>        _copy_to_user+0x30/0x110 lib/usercopy.c:25
>        copy_to_user include/linux/uaccess.h:155 [inline]
>        filldir+0x1ea/0x3a0 fs/readdir.c:196
>        dir_emit_dot include/linux/fs.h:3464 [inline]
>        dir_emit_dots include/linux/fs.h:3475 [inline]
>        dcache_readdir+0x13a/0x620 fs/libfs.c:193
>        iterate_dir+0x48b/0x5d0 fs/readdir.c:51
>        __do_sys_getdents fs/readdir.c:231 [inline]
>        __se_sys_getdents fs/readdir.c:212 [inline]
>        __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #0 (&sb->s_type->i_mutex_key#9){++++}:
>        lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
>        down_write+0x8f/0x130 kernel/locking/rwsem.c:70
>        inode_lock include/linux/fs.h:765 [inline]
>        shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>        ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455
>        ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797
>        vfs_ioctl fs/ioctl.c:46 [inline]
>        file_ioctl fs/ioctl.c:501 [inline]
>        do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685
>        ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702
>        __do_sys_ioctl fs/ioctl.c:709 [inline]
>        __se_sys_ioctl fs/ioctl.c:707 [inline]
>        __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> other info that might help us debug this:
>
> Chain exists of:
>   &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex
>
>  Possible unsafe locking scenario:
>
>        CPU0                    CPU1
>        ----                    ----
>   lock(ashmem_mutex);
>                                lock(&mm->mmap_sem);
>                                lock(ashmem_mutex);
>   lock(&sb->s_type->i_mutex_key#9);
>
>  *** DEADLOCK ***
>
> 1 lock held by syz-executor900/4483:
>  #0: 0000000025208078 (ashmem_mutex){+.+.}, at:
> ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448

Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Suggested-by: NeilBrown <neilb@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agofs/proc/kcore.c: fix invalid memory access in multi-page read optimization
Dominique Martinet [Thu, 20 Sep 2018 19:22:35 +0000 (12:22 -0700)]
fs/proc/kcore.c: fix invalid memory access in multi-page read optimization

The 'm' kcore_list item could point to kclist_head, and it is incorrect to
look at m->addr / m->size in this case.

There is no choice but to run through the list of entries for every
address if we did not find any entry in the previous iteration

Reset 'm' to NULL in that case at Omar Sandoval's suggestion.

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/1536100702-28706-1-git-send-email-asmadeus@codewreck.org
Fixes: bf991c2231117 ("proc/kcore: optimize multiple page reads")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agomm: disable deferred struct page for 32-bit arches
Pasha Tatashin [Thu, 20 Sep 2018 19:22:30 +0000 (12:22 -0700)]
mm: disable deferred struct page for 32-bit arches

Deferred struct page init is needed only on systems with large amount of
physical memory to improve boot performance.  32-bit systems do not
benefit from this feature.

Jiri reported a problem where deferred struct pages do not work well with
x86-32:

[    0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.036269] Initializing CPU#0
[    0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0)
[    0.038459] page:f6780000 is uninitialized and poisoned
[    0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[    0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
[    0.040038] ------------[ cut here ]------------
[    0.040399] kernel BUG at include/linux/page-flags.h:293!
[    0.040823] invalid opcode: 0000 [#1] SMP PTI
[    0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9
[    0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[    0.042496] EIP: free_highmem_page+0x64/0x80
[    0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71
[    0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8
[    0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc
[    0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086
[    0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690
[    0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    0.046913] DR6: fffe0ff0 DR7: 00000400
[    0.047220] Call Trace:
[    0.047419]  add_highpages_with_active_regions+0xbd/0x10d
[    0.047854]  set_highmem_pages_init+0x5b/0x71
[    0.048202]  mem_init+0x2b/0x1e8
[    0.048460]  start_kernel+0x1d2/0x425
[    0.048757]  i386_start_kernel+0x93/0x97
[    0.049073]  startup_32_smp+0x164/0x168
[    0.049379] Modules linked in:
[    0.049626] ---[ end trace 337949378db0abbb ]---

We free highmem pages before their struct pages are initialized:

mem_init()
 set_highmem_pages_init()
  add_highpages_with_active_regions()
   free_highmem_page()
    .. Access uninitialized struct page here..

Because there is no reason to have this feature on 32-bit systems, just
disable it.

Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com
Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements")
Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agofork: report pid exhaustion correctly
KJ Tsanaktsidis [Thu, 20 Sep 2018 19:22:25 +0000 (12:22 -0700)]
fork: report pid exhaustion correctly

Make the clone and fork syscalls return EAGAIN when the limit on the
number of pids /proc/sys/kernel/pid_max is exceeded.

Currently, when the pid_max limit is exceeded, the kernel will return
ENOSPC from the fork and clone syscalls.  This is contrary to the
documented behaviour, which explicitly calls out the pid_max case as one
where EAGAIN should be returned.  It also leads to really confusing error
messages in userspace programs which will complain about a lack of disk
space when they fail to create processes/threads for this reason.

This error is being returned because alloc_pid() uses the idr api to find
a new pid; when there are none available, idr_alloc_cyclic() returns
-ENOSPC, and this is being propagated back to userspace.

This behaviour has been broken before, and was explicitly fixed in
commit 35f71bc0a09a ("fork: report pid reservation failure properly"),
so I think -EAGAIN is definitely the right thing to return in this case.
The current behaviour change dates from commit 95846ecf9dac ("pid:
replace pid bitmap implementation with IDR AIP") and was I believe
unintentional.

This patch has no impact on the case where allocating a pid fails because
the child reaper for the namespace is dead; that case will still return
-ENOMEM.

Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com
Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP")
Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 years agoMAINTAINERS: Add X86 MM entry
Thomas Gleixner [Wed, 19 Sep 2018 12:33:14 +0000 (14:33 +0200)]
MAINTAINERS: Add X86 MM entry

Dave, Andy and Peter are de facto overseing the mm parts of X86. Add an
explicit maintainers entry.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
6 years agox86/intel_rdt: Add Reinette as co-maintainer for RDT
Fenghua Yu [Thu, 20 Sep 2018 19:37:08 +0000 (12:37 -0700)]
x86/intel_rdt: Add Reinette as co-maintainer for RDT

Reinette Chatre is doing great job on enabling pseudo-locking and other
features in RDT. Add her as co-maintainer for RDT.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1537472228-221799-1-git-send-email-fenghua.yu@intel.com
6 years agoRevert "ubifs: xattr: Don't operate on deleted inodes"
Richard Weinberger [Sun, 16 Sep 2018 21:57:35 +0000 (23:57 +0200)]
Revert "ubifs: xattr: Don't operate on deleted inodes"

This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52.
UBIFS wants to assert that xattr operations are only issued on files
with positive link count. The said patch made this operations return
-ENOENT for unlinked files such that the asserts will no longer trigger.
This was wrong since xattr operations are perfectly fine on unlinked
files.
Instead the assertions need to be fixed/removed.

Cc: <stable@vger.kernel.org>
Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes")
Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Weinberger <richard@nod.at>
6 years agoubifs: drop false positive assertion
Sascha Hauer [Wed, 12 Sep 2018 12:51:38 +0000 (14:51 +0200)]
ubifs: drop false positive assertion

The following sequence triggers

ubifs_assert(c, c->lst.taken_empty_lebs > 0);

at the end of ubifs_remount_fs():

mount -t ubifs /dev/ubi0_0 /mnt
echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error
umount /mnt
mount -t ubifs -o ro /dev/ubix_y /mnt
mount -o remount,ro /mnt

The resulting

UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161)

is a false positive. In the case above c->lst.taken_empty_lebs has
never been changed from its initial zero value. This will only happen
when the deferred recovery is done.

Fix this by doing the assertion only when recovery has been done
already.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
6 years agoubifs: Check for name being NULL while mounting
Richard Weinberger [Mon, 3 Sep 2018 21:06:23 +0000 (23:06 +0200)]
ubifs: Check for name being NULL while mounting

The requested device name can be NULL or an empty string.
Check for that and refuse to continue. UBIFS has to do this manually
since we cannot use mount_bdev(), which checks for this condition.

Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
6 years agosctp: update dst pmtu with the correct daddr
Xin Long [Thu, 20 Sep 2018 09:27:28 +0000 (17:27 +0800)]
sctp: update dst pmtu with the correct daddr

When processing pmtu update from an icmp packet, it calls .update_pmtu
with sk instead of skb in sctp_transport_update_pmtu.

However for sctp, the daddr in the transport might be different from
inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or
create the route cache. The incorrect daddr will cause a different
route cache created for the path.

So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr
should be updated with the daddr in the transport, and update it back
after it's done.

The issue has existed since route exceptions introduction.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Reported-by: ian.periam@dialogic.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agobnxt_en: don't try to offload VLAN 'modify' action
Davide Caratti [Wed, 19 Sep 2018 17:01:37 +0000 (19:01 +0200)]
bnxt_en: don't try to offload VLAN 'modify' action

bnxt offload code currently supports only 'push' and 'pop' operation: let
.ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured.

Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoKVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
Liran Alon [Sun, 16 Sep 2018 11:28:20 +0000 (14:28 +0300)]
KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs

The handlers of IOCTLs in kvm_arch_vcpu_ioctl() are expected to set
their return value in "r" local var and break out of switch block
when they encounter some error.
This is because vcpu_load() is called before the switch block which
have a proper cleanup of vcpu_put() afterwards.

However, KVM_{GET,SET}_NESTED_STATE IOCTLs handlers just return
immediately on error without performing above mentioned cleanup.

Thus, change these handlers to behave as expected.

Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agodrm/amdkfd: Fix ATS capablity was not reported correctly on some APUs
Yong Zhao [Thu, 13 Sep 2018 01:42:20 +0000 (21:42 -0400)]
drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs

Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we
need to workaround this.

For future compatibility, we also overwrite the bit in capability according
to the value of needs_iommu_device.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9
Yong Zhao [Thu, 13 Sep 2018 01:42:19 +0000 (21:42 -0400)]
drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9

CWSR fails on Raven if the control stack is MTYPE_UC, which is used
for regular GART mappings. As a workaround we map it using MTYPE_NC.

The MEC firmware expects the control stack at one page offset from the
start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU
added a memory allocation flag just for this purpose.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
Amber Lin [Thu, 13 Sep 2018 01:42:18 +0000 (21:42 -0400)]
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7

A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agopinctrl: intel: Do pin translation in other GPIO operations as well
Mika Westerberg [Tue, 18 Sep 2018 15:36:21 +0000 (18:36 +0300)]
pinctrl: intel: Do pin translation in other GPIO operations as well

For some reason I thought GPIOLIB handles translation from GPIO ranges
to pinctrl pins but it turns out not to be the case. This means that
when GPIOs operations are performed for a pin controller having a custom
GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets
used internally.

Fix this in the same way we did for lock/unlock IRQ operations and
translate the GPIO number to pin before using it.

Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups")
Reported-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoMerge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus
Jens Axboe [Thu, 20 Sep 2018 15:10:38 +0000 (09:10 -0600)]
Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus

Pull NVMe fix from Christoph.

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvme: count all ANA groups for ANA Log page

6 years agofloppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
Andy Whitcroft [Thu, 20 Sep 2018 15:09:48 +0000 (09:09 -0600)]
floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl

The final field of a floppy_struct is the field "name", which is a pointer
to a string in kernel memory.  The kernel pointer should not be copied to
user memory.  The FDGETPRM ioctl copies a floppy_struct to user memory,
including this "name" field.  This pointer cannot be used by the user
and it will leak a kernel address to user-space, which will reveal the
location of kernel code and data and undermine KASLR protection.

Model this code after the compat ioctl which copies the returned data
to a previously cleared temporary structure on the stack (excluding the
name pointer) and copy out to userspace from there.  As we already have
an inparam union with an appropriate member and that memory is already
cleared even for read only calls make use of that as a temporary store.

Based on an initial patch by Brian Belleville.

CVE-2018-7755
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Broke up long line.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
6 years agosmc: generic netlink family should be __ro_after_init
Johannes Berg [Thu, 20 Sep 2018 07:27:30 +0000 (09:27 +0200)]
smc: generic netlink family should be __ro_after_init

The generic netlink family is only initialized during module init,
so it should be __ro_after_init like all other generic netlink
families.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>