Add qemu_get_buffer_in_place to avoid copies some of the time
qemu_get_buffer always copies the data it reads to a users buffer,
however in many cases the file buffer inside qemu_file could be given
back to the caller, avoiding the copy. This isn't always possible
depending on the size and alignment of the data.
Thus 'qemu_get_buffer_in_place' either copies the data to a supplied
buffer or updates a pointer to the internal buffer if convenient.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
'file' becomes confusing when you have flows in each direction;
rename to make it clear.
This leaves just the main forward direction ms->file, which is used
in a lot of places and is probably not worth renaming given the churn.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a function to find a RAMBlock by name; use it in two
of the places that already open code that loop; we've
got another use later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy sends RAMBlock names and offsets over the wire (since it can't
rely on the order of ramaddr being the same), and it starts out with
HVA fault addresses from the kernel.
qemu_ram_block_from_host translates a HVA into a RAMBlock, an offset
in the RAMBlock and the global ram_addr_t value.
Rewrite qemu_ram_addr_from_host to use qemu_ram_block_from_host.
Provide qemu_ram_get_idstr since its the actual name text sent on the
wire.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
The HOST_PAGE_ALIGN macros don't work until the page size variables
have been set up; later in postcopy I use those macros in the RAM
code, and it can be triggered using -object.
Fix this by initialising page_size_init() earlier - it's currently
initialised inside the accelerators, move it up into vl.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
The vmstate_configuration is currently written
in 'qemu_savevm_state_begin', move it to
'qemu_savevm_state_header' since it's got a hard
requirement that it must be the 1st thing after
the header.
(In postcopy some 'command' sections get sent
early before the saving of the main sections
and hence before qemu_savevm_state_begin).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
The migration code generally is built target-independent, however
there are a few places where knowing the target page size would
avoid artificially moving stuff into migration/ram.c.
Provide 'qemu_target_page_bits()' that returns TARGET_PAGE_BITS
to other bits of code so that they can stay target-independent.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Maydell [Tue, 10 Nov 2015 09:39:24 +0000 (09:39 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-10' into staging
QAPI patches
# gpg: Signature made Tue 10 Nov 2015 07:12:25 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-11-10:
qapi-introspect: Document lack of sorting
qapi: Provide nicer array names in introspection
qapi: More tests of input arrays
qapi: Test failure in middle of array parse
qapi: More tests of alternate output
qapi: Simplify error cleanup in test-qmp-*
qapi: Simplify non-error testing in test-qmp-*
qapi: Plug leaks in test-qmp-*
qapi: Share test_init code in test-qmp-input*
qobject: Protect against use-after-free in qobject_decref()
qapi: Strengthen test of TestStructList
qapi: Use generated TestStruct machinery in tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake [Fri, 6 Nov 2015 06:35:36 +0000 (23:35 -0700)]
qapi-introspect: Document lack of sorting
qapi-code-gen.txt already claims that types, commands, and
events share a common namespace; set this in stone by further
documenting that our introspection output will never have
collisions with the same name tied to more than one meta-type.
Our largest QMP enum currently has 125 values, our largest
object type has 27 members, and the mean for each is less than
10. These sizes are small enough that the per-element overhead
of O(log n) binary searching probably outweighs the speed
possible with direct O(n) linear searching (a better algorithm
with more overhead will only beat a leaner naive algorithm only
as you scale to larger input sizes).
Arguably, the overall SchemaInfo array could be sorted by name;
there, we currently have 531 entities, large enough for a binary
search to be faster than linear. However, remember that we have
mutually-recursive types, which means there is no topological
ordering that will allow clients to learn all information about
that type in a single linear pass; thus clients will want to do
random access over the data, and they will probably read the
introspection output into a hashtable for O(1) lookup rather
than O(log n) binary searching, at which point, pre-sorting our
introspection output doesn't help the client.
It doesn't help that sorting can be subjective if you introduce
locales into the mix (I'm not experienced enough with Python
to know for sure, but at least it looks like it defaults to
sorting in the C locale even when run under a different locale).
And while our current introspection output is deterministic
(because we visit entities in a sorted order), we may want
to change that order in the future (such as using OrderedDict
to stick to .json declaration order).
For these reasons, we simply document that clients should not
rely on any particular order of items in introspection output.
And since it is now a documented part of the contract, we have
the freedom to later rearrange output if needed, without
worrying about breaking well-written clients.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-13-git-send-email-eblake@redhat.com>
[Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:35 +0000 (23:35 -0700)]
qapi: Provide nicer array names in introspection
For the sake of humans reading introspection output, it is nice
to have the name of implicit array types be recognizable as
arrays of the underlying type. However, while this patch allows
humans to skip from a command with return type "[123]" straight
to the definition of type "123" without having to first inspect
type "[123]", document that this shortcut should not be taken by
client apps.
This makes the resulting introspection string slightly larger by
default (just over 200 bytes), but it's in the noise (less than
0.3% of the overall 70k size of 'query-qmp-capabilities').
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-12-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:34 +0000 (23:35 -0700)]
qapi: More tests of input arrays
Our testsuite had no coverage of empty arrays, nor of what
happens when the input does not match the expected type.
Useful to have, especially if we start changing the visitor
contracts.
I did not think it worth duplicating these additions to
test-qmp-input-strict; since all strict mode does is add
the ability to reject JSON input that has more keys than
what the visitor expects, yet the additions in this patch
error out earlier than that point regardless of whether
strict mode was requested.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-11-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:33 +0000 (23:35 -0700)]
qapi: Test failure in middle of array parse
Our generated list visitors have the same problem as has been
mentioned elsewhere (see commit 2f52e20): they allocate data
even on failure. An upcoming patch will correct things to
provide saner guarantees, but first we need to expose the
behavior in the testsuite to ensure we aren't introducing any
memory usage bugs.
There are more test cases throughout the test-qmp-input-* tests
that already deal with partial allocation; a later commit will
clean up all visit_type_FOO(), without marking all of the tests
with FIXME at this time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:32 +0000 (23:35 -0700)]
qapi: More tests of alternate output
The testsuite was only covering that we could output the 'int'
branch of an alternate (no additional allocation/cleanup required).
Add a test of the 'str' branch, to make sure that things still
work even when a branch involves allocation.
Update to modern style of g_new0() over g_malloc0() while
touching it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-9-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:31 +0000 (23:35 -0700)]
qapi: Simplify error cleanup in test-qmp-*
We have several tests that perform multiple sub-actions that are
expected to fail. Asserting that an error occurred, then clearing
it up to prepare for the next action, turned into enough
boilerplate that it was sometimes forgotten (for example, a number
of tests added to test-qmp-input-visitor.c in d88f5fd leaked err).
Worse, if an error is not reset to NULL, we risk invalidating
later use of that error (passing a non-NULL err into a function
is generally a bad idea). Encapsulate the boilerplate into a
single helper function error_free_or_abort(), and consistently
use it.
The new function is added into error.c for use everywhere,
although it is anticipated that testsuites will be the main
client.
Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Mon, 9 Nov 2015 15:14:09 +0000 (15:14 +0000)]
configure: Don't disable optimization for non-fortify builds
Commit b553a0428014636bc inadvertently disabled optimization
for all non-fortify builds. Fix this bug so we only do an
unoptimized build if we want debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447082049-25099-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Mon, 9 Nov 2015 14:56:31 +0000 (14:56 +0000)]
hw/timer/hpet.c: Avoid signed integer overflow which results in bugs on OSX
Signed integer overflow in C is undefined behaviour, and the compiler
is at liberty to assume it can never happen and optimize accordingly.
In particular, the subtractions in hpet_time_after() and hpet_time_after64()
were causing OSX clang to optimize the code such that it was prone to
hangs and complaints about the main loop stalling (presumably because
we were spending all our time trying to service very high frequency
HPET timer callbacks). The clang sanitizer confirms the UB:
hw/timer/hpet.c:119:26: runtime error: signed integer overflow: -2146967296 - 2147003978 cannot be represented in type 'int'
Fix this by doing the subtraction as an unsigned operation and then
converting to signed for the comparison.
Eric Blake [Fri, 6 Nov 2015 06:35:30 +0000 (23:35 -0700)]
qapi: Simplify non-error testing in test-qmp-*
By using &error_abort, we can avoid a local err variable in
situations where we expect success. It also has the nice
effect that if the test breaks, the error message from
error_abort tends to be nicer than that of g_assert().
This patch has an additional bonus of fixing several call sites that
were passing &err to two different functions without checking it in
between. In general that is unsafe practice; because if the first
function sets an error, the second function could abort() if it tries to
set a different error. We got away with it because we were asserting
that err was NULL through the entire chain, but switching to
&error_abort avoids the questionable practice up front.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:29 +0000 (23:35 -0700)]
qapi: Plug leaks in test-qmp-*
Make valgrind happy with the current state of the tests, so that
it is easier to see if future patches introduce new memory problems
without being drowned in noise. Many of the leaks were due to
calling a second init without tearing down the data from an earlier
visit. But since teardown is already idempotent, and we already
register teardown as part of input_visitor_test_add(), it is nicer
to just make init() safe to call multiple times than it is to have
to make all tests call teardown.
Another common leak was forgetting to clean up an error object,
after testing that an error was raised.
Another leak was in test_visitor_in_struct_nested(), failing to
clean the base member of UserDefTwo. Cleaning that up left
check_and_free_str() as dead code (since using the qapi_free_*
takes care of recursion, and we don't want double frees).
A final leak was in test_visitor_out_any(), which was reassigning
the qobj local variable to a subset of the overall structure
needing freeing; it did not result in a use-after-free, but
was not cleaning up all the qdict.
test-qmp-event and test-qmp-commands were already clean.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-6-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:28 +0000 (23:35 -0700)]
qapi: Share test_init code in test-qmp-input*
Rather than duplicate the body of two functions just to
decide between qobject_from_jsonv() and qobject_from_json(),
exploit the fact that qobject_from_jsonv() intentionally
takes 'va_list *' instead of the more common 'va_list', and
that qobject_from_json() just calls qobject_from_jsonv(,NULL).
For each file, our two existing init functions then become
thin wrappers around a new internal function, and future
updates to initialization don't have to be duplicated.
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-5-git-send-email-eblake@redhat.com>
[Two old comment typos fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:27 +0000 (23:35 -0700)]
qobject: Protect against use-after-free in qobject_decref()
Adding an assertion to qobject_decref() will ensure that a
programming error causing use-after-free will result in
immediate failure (provided no other thread has started
using the memory) instead of silently attempting to wrap
refcnt around and leaving the problem to potentially bite
later at a harder point to diagnose.
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-4-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:26 +0000 (23:35 -0700)]
qapi: Strengthen test of TestStructList
Make each list element different, to ensure that order is
preserved, and use the generated free function instead of
hand-rolling our own to ensure (under valgrind) that the
list is properly cleaned.
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-3-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Fri, 6 Nov 2015 06:35:25 +0000 (23:35 -0700)]
qapi: Use generated TestStruct machinery in tests
Commit d88f5fd and friends first introduced the various test-qmp-*
tests in 2011, with duplicated hand-rolled TestStruct machinery,
to make sure the qapi visitor interface was tested. Later, commit 4f193e3 in 2013 added a .json file for further testing use by the
files, but without consolidating any of the existing hand-rolled
visitors. And with four copies, subtle differences have crept in,
between the tests themselves (mainly whitespace differences, but
also a question of whether to use NULL or "TestStruct" when
calling visit_start_struct()) and from what the generator produces
(the hand-rolled versions did not cater to partially-allocated
objects, because they did not have a deallocation usage).
Of course, just because the visitor interface is tested does not
mean it is a sane interface; and future patches will be changing
some of the visitor contracts. Rather than having to duplicate
the cleanup work in each copy of the TestStruct visitor, and keep
each hand-rolled copy in sync with what the generator supplies, we
might as well just test what the generator should give us in the
first place.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Mon, 9 Nov 2015 11:20:51 +0000 (11:20 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 09 Nov 2015 10:08:17 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
Stefan Hajnoczi [Wed, 4 Nov 2015 17:27:23 +0000 (20:27 +0300)]
blockdev: acquire AioContext in hmp_commit()
This one slipped through. Although we acquire AioContext when
committing all devices we don't for just a single device.
AioContext must be acquired before calling bdrv_*() functions to
synchronize access with other threads that may be using the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Wed, 4 Nov 2015 17:19:42 +0000 (20:19 +0300)]
monitor: add missed aio_context_acquire into vm_completion call
Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Luiz Capitulino <lcapitulino@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fam Zheng [Fri, 30 Oct 2015 04:06:29 +0000 (12:06 +0800)]
aio: Introduce aio-epoll.c
To minimize code duplication, epoll is hooked into aio-posix's
aio_poll() instead of rolling its own. This approach also has both
compile-time and run-time switchability.
1) When QEMU starts with a small number of fds in the event loop, ppoll
is used.
2) When QEMU starts with a big number of fds, or when more devices are
hot plugged, epoll kicks in when the number of fds hits the threshold.
3) Some fds may not support epoll, such as tty based stdio. In this
case, it falls back to ppoll.
A rough benchmark with scsi-disk on virtio-scsi dataplane (epoll gets
enabled from 64 onward). Numbers are in MB/s.
bring_map currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space. Introduce a mapped_len
parameter so it can handle this, returning the actual mapped length.
This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.
Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.
Let's hope these are uncommon - at least we are not breaking things.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-2-git-send-email-mst@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use address_space_read to make sure we handle the case of an indirect
descriptor crossing DIMM boundary correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-1-git-send-email-mst@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the Allwinner A10 AHCI controller module to the SoC.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 69d6962f2d14a218bd07e9ac4ccd1947737cc30f.1445917756.git.crosthwaite.peter@gmail.com Signed-off-by: John Snow <jsnow@redhat.com>
Add a Sysbus AHCI subclass for the Allwinner AHCI. It has a few extra
vendor specific registers which are used for phy and power init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 833b5b05ed5ade38bf69656679b0a7575e79492b.1445917756.git.crosthwaite.peter@gmail.com
[resolved patch context on pull --js] Signed-off-by: John Snow <jsnow@redhat.com>
Do the init level tasks asap and the realize later (mainly when
num_ports is available). This allows sub-class realize routines
to work with the device post-init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1a7c7b2b32e5ccf49373a5065da5ece89730d3ac.1445917756.git.crosthwaite.peter@gmail.com Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 517ba413dce7deb4ab17c0cc1e8bbdaaace2a0db.1445917756.git.crosthwaite.peter@gmail.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Fri, 6 Nov 2015 19:09:00 +0000 (14:09 -0500)]
ide: remove hardcoded 2GiB transactional limit
Not that you can request a >2GiB transaction, but that's why checking
for it makes no sense anymore.
With the newer 'limit' parameter to prepare_buf, we no longer need a
static limit. The maximum limit is still 2GiB, but the limit parameter
is set to the current transaction size, which cannot surpass 32MiB
(512 * 65536). If the PRDT surpasses the transactional size, then,
we'll just carry out the normative underflow handling pathways instead
of needing an extra, strange pathway that worries about hitting some
logistical cap for the largest sglist we can support -- we'll never
even attempt to build one that big anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1445902682-20051-1-git-send-email-jsnow@redhat.com
Peter Maydell [Fri, 6 Nov 2015 12:50:24 +0000 (12:50 +0000)]
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-11-06' into staging
trivial patches for 2015-11-06
# gpg: Signature made Fri 06 Nov 2015 12:42:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-11-06: (24 commits)
tap-bsd: use user-specified tap device if it already exists
qemu-sockets: do not test path with access() before unlinking
taget-ppc: Fix read access to IBAT registers higher than IBAT3
exec: avoid unnecessary cacheline bounce on ram_list.mru_block
target-alpha: fix uninitialized variable
ivshmem-server: fix possible OVERRUN
pci-assign: do not test path with access() before opening
qom/object: fix 2 comment typos
configure: remove help string for 'vnc-tls' option
usb: Use g_new() & friends where that makes obvious sense
qxl: Use g_new() & friends where that makes obvious sense
ui: Use g_new() & friends where that makes obvious sense
bt: fix use of uninitialized variable seqlen
hw/dma/pxa2xx: Remove superfluous memset
linux-user/syscall: Replace g_malloc0 + memcpy with g_memdup
tests/i44fx-test: No need for zeroing memory before memset
hw/input/tsc210x: Remove superfluous memset
xen: fix invalid assertion
tests: ignore test-qga
fix bad indentation in pcie_cap_slot_write_config()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Wed, 4 Nov 2015 13:48:47 +0000 (14:48 +0100)]
qemu-sockets: do not test path with access() before unlinking
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
This is not one such case; on the other hand, access() *will* skip
unlink() for a non-existent path, so ignore ENOENT return values from
the unlink() system call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Thu, 22 Oct 2015 11:51:30 +0000 (13:51 +0200)]
exec: avoid unnecessary cacheline bounce on ram_list.mru_block
Whenever the MRU cache hits for the list of RAM blocks, qemu_get_ram_block
does an unnecessary write that causes a processor cache line to bounce
from one core to another. This causes a performance hit.
Reported-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Gonglei [Mon, 2 Nov 2015 01:13:48 +0000 (09:13 +0800)]
ivshmem-server: fix possible OVERRUN
>>> CID 1337991: Memory - illegal accesses (OVERRUN)
>>> Decrementing "i". The value of "i" is now 65534.
218 while (i--) {
219 event_notifier_cleanup(&peer->vectors[i]);
220 }
Paolo Bonzini [Mon, 2 Nov 2015 14:17:37 +0000 (15:17 +0100)]
pci-assign: do not test path with access() before opening
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
In this case we can get the same error from fopen(), so just use
strerror and errno there---which actually improves the error
message most of the time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
usb: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qxl: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ui: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Mon, 19 Oct 2015 14:08:40 +0000 (16:08 +0200)]
bt: fix use of uninitialized variable seqlen
sdp_svc_match, sdp_attr_match and sdp_svc_attr_match read the last
argument. The only sensible way to change the code is to make that last
argument "len" instead of "seqlen" which is the length of a subsequence
in the previous "if" branch.
To make the structure of the code clearer, use "else" instead of
"else if".
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 9 Oct 2015 15:56:35 +0000 (17:56 +0200)]
hw/dma/pxa2xx: Remove superfluous memset
g_malloc0 already clears the memory, so no need for
the additional memset here. And while we're at it,
also convert the g_malloc0 to the preferred g_new0.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 9 Oct 2015 15:56:38 +0000 (17:56 +0200)]
linux-user/syscall: Replace g_malloc0 + memcpy with g_memdup
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 9 Oct 2015 15:56:36 +0000 (17:56 +0200)]
hw/input/tsc210x: Remove superfluous memset
g_malloc0 already clears the memory, so no need for additional
memsets here. And while we're at it, let's also remove the
superfluous typecasts for the return values of g_malloc0
and use the type-safe g_new0 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tcx_initfn() function is already supplied with an
Object *obj pointer, so there is no need to cast the
state pointer back to an Object pointer all over the
place. And while we're at it, also remove the superfluous
"return;" statement in this function.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Tue, 13 Oct 2015 07:38:50 +0000 (09:38 +0200)]
gdbstub: Fix buffer overflows in gdb_handle_packet()
Some places in gdb_handle_packet() can get an arbitrary length (most
times directly from the client) and either didn't check it at all or
checked against the wrong value, potentially causing buffer overflows.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 6 Nov 2015 11:31:40 +0000 (11:31 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into staging
So here it is, let's see what happens.
# gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream-replay:
replay: recording of the user input
replay: command line options
replay: replay blockers for devices
replay: initialization and deinitialization
replay: ptimer
bottom halves: introduce bh call function
replay: checkpoints
icount: improve counting for record/replay
replay: shutdown event
replay: recording and replaying clock ticks
replay: asynchronous events infrastructure
replay: interrupts and exceptions
cpu: replay instructions sequence
cpu-exec: allow temporary disabling icount
replay: introduce icount event
replay: introduce mutex to protect the replay log
replay: internal functions for replay log
replay: global variables and function stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Mon, 2 Nov 2015 14:06:23 +0000 (14:06 +0000)]
configure: add missing --disable-modules option
According to ./configure all options should have both --enable-foo and
--disable-foo:
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1446473183-24250-1-git-send-email-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 6 Nov 2015 10:10:15 +0000 (10:10 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2015-11-05
# gpg: Signature made Thu 05 Nov 2015 19:35:31 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Enable clflushopt/clwb/pcommit instructions
target-i386: Remove POPCNT from qemu64 and qemu32 CPU models
target-i386: Remove ABM from qemu64 CPU model
target-i386: Remove SSE4a from qemu64 CPU model
target-i386: Set "check=off" by default on pc-*-2.4 and older
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:25:24 +0000 (19:25 +0300)]
replay: recording of the user input
This records user input (keyboard and mouse events) in record mode and replays
these input events in replay mode.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162524.8676.11696.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:25:18 +0000 (19:25 +0300)]
replay: command line options
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:25:13 +0000 (19:25 +0300)]
replay: replay blockers for devices
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:25:07 +0000 (19:25 +0300)]
replay: initialization and deinitialization
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:56 +0000 (19:24 +0300)]
replay: ptimer
This patch adds deterministic replay for hardware periodic countdown timers.
ptimer uses bottom halves layer to execute such an asynchronous callback.
We put this callback into the replay queue instead of bottom halves one.
When checkpoint is met by main loop thread, the replay queue is processed
and callback is executed. Binding callback moment to one of the checkpoints
makes it deterministic.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162456.8676.83366.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:50 +0000 (19:24 +0300)]
bottom halves: introduce bh call function
This patch introduces aio_bh_call function. It is used to execute
bottom halves as callbacks without adding them to the queue.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162450.8676.56980.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:44 +0000 (19:24 +0300)]
replay: checkpoints
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:39 +0000 (19:24 +0300)]
icount: improve counting for record/replay
icount_warp_rt function is called by qemu_clock_warp and as
callback of icount_warp timer. This patch adds call to qemu_clock_warp
into main_loop_wait function, because icount warp may be missed
in record/replay mode, when CPU is sleeping.
This patch also disables of calling this function by timer, because
it is not needed after making modifications of main_loop_wait.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162439.8676.38290.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:33 +0000 (19:24 +0300)]
replay: shutdown event
This patch records and replays simulator shutdown event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162433.8676.32262.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:28 +0000 (19:24 +0300)]
replay: recording and replaying clock ticks
Clock ticks are considered as the sources of non-deterministic data for
virtual machine. This patch implements saving the clock values when they
are acquired (virtual, host clock).
When replaying the execution corresponding values are read from log and
transfered to the module, which wants to read the values.
Such a design required the clock polling to be synchronized. Sometimes
it is not true - e.g. when timeouts for timer lists are checked. In this case
we use a cached value of the clock, passing it to the client code.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:22 +0000 (19:24 +0300)]
replay: asynchronous events infrastructure
This patch adds module for saving and replaying asynchronous events.
These events include network packets, keyboard and mouse input,
USB packets, thread pool and bottom halves callbacks.
All events are stored in the queue to be processed at synchronization points
such as beginning of TB execution, or checkpoint in the iothread.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162422.8676.88696.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:16 +0000 (19:24 +0300)]
replay: interrupts and exceptions
This patch includes modifications of common cpu files. All interrupts and
exceptions occured during recording are written into the replay log.
These events allow correct replaying the execution by kicking cpu thread
when one of these events is found in the log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These instructions are used by NVDIMM drivers and the specification is
located at:
https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf
There instructions are available on Skylake Server.
Eduardo Habkost [Tue, 3 Nov 2015 19:24:18 +0000 (17:24 -0200)]
target-i386: Remove POPCNT from qemu64 and qemu32 CPU models
POPCNT is not available on Penryn and older and on Opteron_G2 and older,
and we want to make the default CPU runnable in most hosts, so it won't
be enabled by default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable POPCNT in
the qemu64 and qemu32 CPU models entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Tue, 3 Nov 2015 19:24:18 +0000 (17:24 -0200)]
target-i386: Remove ABM from qemu64 CPU model
ABM is not available on Sandy Bridge and older, and we want to make the
default CPU runnable in most hosts, so it won't be enabled by default in
KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable ABM in
the qemu64 CPU model entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Tue, 3 Nov 2015 19:17:33 +0000 (17:17 -0200)]
target-i386: Remove SSE4a from qemu64 CPU model
SSE4a is not available in any Intel CPU, and we want to make the default
CPU runnable in most hosts, so it doesn't make sense to enable it by
default in KVM mode.
We should eventually have all features supported by TCG enabled by
default in TCG mode, but as we don't have a good mechanism today to
ensure we have different defaults in KVM and TCG mode, disable SSE4a in
the qemu64 CPU model entirely.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Tue, 3 Nov 2015 19:18:50 +0000 (17:18 -0200)]
target-i386: Set "check=off" by default on pc-*-2.4 and older
The default CPU model (qemu64) have some issues today: it enables some
features (ABM and SSE4a) that are not present in many host CPUs. That
means many hosts (but not all of them) had those features silently
disabled in the default configuration in QEMU 2.4 and older.
With the new "check=on" default, this causes warnings to be printed in
the default configuration, because of the lack of SSE4A on all Intel
hosts, and the lack of ABM on Sandy Bridge and older hosts:
Those issues will be fixed in pc-*-2.5 and newer. But as we can't change
the guest ABI in pc-*-2.4, disable "check" mode by default in pc-*-2.4
and older so we don't print spurious warnings.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Thu, 5 Nov 2015 14:31:24 +0000 (14:31 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Guest ABI fixes for PC machines (hw_version)
* Fixes for recent Perl
* John Snow's configure fixes
* file-backed RAM improvements (Igor, Pavel)
* -Werror=clobbered fixes (Stefan)
* Kill -d ioport
* Fix qemu-system-s390x
* Performance improvement for kvmclock migration
# gpg: Signature made Thu 05 Nov 2015 13:42:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
iscsi: Translate scsi sense into error code
Revert "Introduce cpu_clean_all_dirty"
kvmclock: add a new function to update env->tsc.
configure: disable FORTIFY_SOURCE under clang
backends/hostmem-file: Allow to specify full pathname for backing file
configure: disallow ccache during compile tests
cpu-exec: Fix compiler warning (-Werror=clobbered)
memory: call begin, log_start and commit when registering a new listener
megasas: Use qemu_hw_version() instead of QEMU_VERSION
osdep: Rename qemu_{get, set}_version() to qemu_{, set_}hw_version()
pc: Set hw_version on all machine classes
qemu-log: remove -d ioport
ioport: do not use CPU_LOG_IOPORT
target-i386: fix pcmpxstrx equal-ordered (strstr) mode
scripts/text2pod.pl: Escape left brace
file_ram_alloc: propagate error to caller instead of terminating QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fam Zheng [Thu, 5 Nov 2015 05:00:09 +0000 (13:00 +0800)]
iscsi: Translate scsi sense into error code
Previously we return -EIO blindly when anything goes wrong. Add a helper
function to parse sense fields and try to make the return code more
meaningful.
This also fixes the default werror configuration (enospc) when we're
using qcow2 on an iscsi lun. The old -EIO not being treated as out of
space error failed to trigger vm stop.
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:24:05 +0000 (19:24 +0300)]
cpu: replay instructions sequence
This patch adds calls to replay functions into the icount setup block.
In record mode number of executed instructions is written to the log.
In replay mode number of istructions to execute is taken from the replay log.
When replayed instructions counter is expired qemu_notify_event()
function is called to wake up the iothread.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162405.8676.31890.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:23:59 +0000 (19:23 +0300)]
cpu-exec: allow temporary disabling icount
This patch is required for deterministic replay to generate an exception
by trying executing an instruction without changing icount.
It adds new flag to TB for disabling icount while translating it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:23:54 +0000 (19:23 +0300)]
replay: introduce icount event
This patch adds icount event to the replay subsystem. This event corresponds
to execution of several instructions and used to synchronize input events
in the replay phase.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162354.8676.31351.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:23:48 +0000 (19:23 +0300)]
replay: introduce mutex to protect the replay log
This mutex will protect read/write operations for replay log.
Using mutex is necessary because most of the events consist of
several fields stored in the log. The mutex will help to avoid races.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162348.8676.8628.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:23:43 +0000 (19:23 +0300)]
replay: internal functions for replay log
This patch adds functions to perform read and write operations
with replay log.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162342.8676.29445.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgalyuk [Thu, 17 Sep 2015 16:23:37 +0000 (19:23 +0300)]
replay: global variables and function stubs
This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 5 Nov 2015 10:52:35 +0000 (10:52 +0000)]
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-11-04-tag' into staging
qemu-ga patch queue
* fix file handle cleanup on w32
* use non-blocking mode for file handles on w32 to avoid
hangs on guest-file-read/guest-file-write to pipes
# gpg: Signature made Wed 04 Nov 2015 19:36:16 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2015-11-04-tag:
qga: set file descriptor in qmp_guest_file_open non-blocking on Win32
qga: fixed CloseHandle in qmp_guest_file_open
qga: drop hand-made guest_file_toggle_flags helper
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now 'cpu_clean_all_dirty' is useless, we can revert the related code.
Conflicts:
include/sysemu/kvm.h
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1446695464-27116-3-git-send-email-liang.z.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liang Li [Thu, 5 Nov 2015 03:51:03 +0000 (11:51 +0800)]
kvmclock: add a new function to update env->tsc.
The commit 317b0a6d8 fixed an issue which caused by the outdated
env->tsc value, but the fix lead to 'cpu_synchronize_all_states()'
called twice during live migration. The 'cpu_synchronize_all_states()'
takes about 130us for a VM which has 4 vcpus, it's a bit expensive.
Synchronize the whole CPU context just for updating env->tsc is too
wasting, this patch use a new function to update the env->tsc.
Comparing to 'cpu_synchronize_all_states()', it only takes about 20us.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1446695464-27116-2-git-send-email-liang.z.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John Snow [Tue, 3 Nov 2015 20:43:42 +0000 (15:43 -0500)]
configure: disable FORTIFY_SOURCE under clang
Some versions of clang may have difficulty compiling glibc headers when
-D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot
compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This
manifests currently as build failures with clang and any arm target.
According to LLVM dev Richard Smith, clang does not target or support
FORTIFY_SOURCE + glibc, and it should not be relied on.
"It's still an unsupported combination, and while it might compile, some
of the checks are unlikely to work because they require a frontend
inliner to be useful"
Conclusion: disable fortify-source if we appear to be using clang instead
of testing for compile success or failure, which may be incidental or not
indicative of proper support of the feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# gpg: Signature made Wed 04 Nov 2015 12:45:19 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151104:
migration: fix analyze-migration.py script
migration: code clean up
migration: rename cancel to cleanup in SaveVMHandles
migration: rename qemu_savevm_state_cancel
migration: defer migration_end & blk_mig_cleanup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 4 Nov 2015 18:20:31 +0000 (18:20 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-11-03' into staging
vl.c: Error message rework
# gpg: Signature made Tue 03 Nov 2015 08:40:50 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-11-03:
vl.c: Use "%s support is disabled" error messages consistently
vl.c: Improve warnings on use of deprecated options
vl.c: Touch up error messages
vl.c: Remove unnecessary uppercase in error messages
vl.c: Use "warning:" prefix consistently on warnings
vl.c: Remove periods and exclamation points from error messages
vl.c: Replace fprintf(stderr) with error_report()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / mirror_qemu.git / log