Kan Liang [Tue, 8 Oct 2019 15:50:03 +0000 (08:50 -0700)]
perf/x86/intel: Add Comet Lake CPU support
Comet Lake is the new 10th Gen Intel processor. From the perspective
of Intel PMU, there is nothing changed compared with Sky Lake.
Share the perf code with Sky Lake.
The patch has been tested on real hardware.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1570549810-25049-3-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tom Lendacky [Thu, 1 Aug 2019 18:57:41 +0000 (18:57 +0000)]
perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
It turns out that the NMI latency workaround from commit:
6d3edaae16c6 ("x86/perf/amd: Resolve NMI latency issues for active PMCs")
ends up being too conservative and results in the perf NMI handler claiming
NMIs too easily on AMD hardware when the NMI watchdog is active.
This has an impact, for example, on the hpwdt (HPE watchdog timer) module.
This module can produce an NMI that is used to reset the system. It
registers an NMI handler for the NMI_UNKNOWN type and relies on the fact
that nothing has claimed an NMI so that its handler will be invoked when
the watchdog device produces an NMI. After the referenced commit, the
hpwdt module is unable to process its generated NMI if the NMI watchdog is
active, because the current NMI latency mitigation results in the NMI
being claimed by the perf NMI handler.
Update the AMD perf NMI latency mitigation workaround to, instead, use a
window of time. Whenever a PMC is handled in the perf NMI handler, set a
timestamp which will act as a perf NMI window. Any NMIs arriving within
that window will be claimed by perf. Anything outside that window will
not be claimed by perf. The value for the NMI window is set to 100 msecs.
This is a conservative value that easily covers any NMI latency in the
hardware. While this still results in a window in which the hpwdt module
will not receive its NMI, the window is now much, much smaller.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6d3edaae16c6 ("x86/perf/amd: Resolve NMI latency issues for active PMCs") Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <mingo@kernel.org>
Song Liu [Tue, 8 Oct 2019 16:59:49 +0000 (09:59 -0700)]
perf/core: Fix corner case in perf_rotate_context()
In perf_rotate_context(), when the first cpu flexible event fail to
schedule, cpu_rotate is 1, while cpu_event is NULL. Since cpu_event is
NULL, perf_rotate_context will _NOT_ call cpu_ctx_sched_out(), thus
cpuctx->ctx.is_active will have EVENT_FLEXIBLE set. Then, the next
perf_event_sched_in() will skip all cpu flexible events because of the
EVENT_FLEXIBLE bit.
In the next call of perf_rotate_context(), cpu_rotate stays 1, and
cpu_event stays NULL, so this process repeats. The end result is, flexible
events on this cpu will not be scheduled (until another event being added
to the cpuctx).
Here is an easy repro of this issue. On Intel CPUs, where ref-cycles
could only use one counter, run one pinned event for ref-cycles, one
flexible event for ref-cycles, and one flexible event for cycles. The
flexible ref-cycles is never scheduled, which is expected. However,
because of this issue, the cycles event is never scheduled either.
$ perf stat -e ref-cycles:D,ref-cycles,cycles -C 5 -I 1000
To fix this, when the flexible_active list is empty, try rotate the
first event in the flexible_groups. Also, rename ctx_first_active() to
ctx_event_to_rotate(), which is more accurate.
Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <kernel-team@fb.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8d5bce0c37fa ("perf/core: Optimize perf_rotate_context() event scheduling") Link: https://lkml.kernel.org/r/20191008165949.920548-1-songliubraving@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Song Liu [Wed, 4 Sep 2019 21:46:18 +0000 (14:46 -0700)]
perf/core: Rework memory accounting in perf_mmap()
perf_mmap() always increases user->locked_vm. As a result, "extra" could
grow bigger than "user_extra", which doesn't make sense. Here is an
example case:
Arvind Sankar [Mon, 7 Oct 2019 22:00:02 +0000 (18:00 -0400)]
lib/string: Make memzero_explicit() inline instead of external
With the use of the barrier implied by barrier_data(), there is no need
for memzero_explicit() to be extern. Making it inline saves the overhead
of a function call, and allows the code to be reused in arch/*/purgatory
without having to duplicate the implementation.
Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H . Peter Anvin <hpa@zytor.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephan Mueller <smueller@chronox.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-crypto@vger.kernel.org Cc: linux-s390@vger.kernel.org Fixes: 906a4bb97f5d ("crypto: sha256 - Use get/put_unaligned_be32 to get input, memzero_explicit") Link: https://lkml.kernel.org/r/20191007220000.GA408752@rani.riverdale.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.
Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.
This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.
[ bp: Fixup comment in delay_mwaitx() and massage. ]
Linus Torvalds [Sun, 6 Oct 2019 20:53:27 +0000 (13:53 -0700)]
elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings
In commit 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.
Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac74f20 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases. But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.
Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case. End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.
This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.
Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.
It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.
Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.
In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk> Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Fixes: ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments") Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Oct 2019 18:10:15 +0000 (11:10 -0700)]
Merge tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping regression fix from Christoph Hellwig:
"Revert an incorret hunk from a patch that caused problems on various
arm boards (Andrey Smirnov)"
* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix false positive warnings in dma_common_free_remap()
Linus Torvalds [Sun, 6 Oct 2019 00:18:43 +0000 (17:18 -0700)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes this time around:
- Fixup of some clock specifications for DRA7 (device-tree fix)
- Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
warnings at boot
- A few more minor fixups for OMAPs, most around display
- Enable STM32 QSPI as =y since their rootfs sometimes comes from
there
- Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool
- Fix of thermal zone definition for ux500 (5.4 regression)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
ARM: dts: ux500: Fix up the CPU thermal zone
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
ARM: dts: am4372: Set memory bandwidth limit for DISPC
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
ARM: dts: Fix wrong clocks for dra7 mcasp
clk: ti: dra7: Fix mcasp8 clock bits
Linus Torvalds [Sat, 5 Oct 2019 19:56:59 +0000 (12:56 -0700)]
Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- remove unneeded ar-option and KBUILD_ARFLAGS
- remove long-deprecated SUBDIRS
- fix modpost to suppress false-positive warnings for UML builds
- fix namespace.pl to handle relative paths to ${objtree}, ${srctree}
- make setlocalversion work for /bin/sh
- make header archive reproducible
- fix some Makefiles and documents
* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: make headers archive reproducible
kbuild: update compile-test header list for v5.4-rc2
kbuild: two minor updates for Documentation/kbuild/modules.rst
scripts/setlocalversion: clear local variable to make it work for sh
namespace: fix namespace.pl script to support relative paths
video/logo: do not generate unneeded logo C files
video/logo: remove unneeded *.o pattern from clean-files
integrity: remove pointless subdir-$(CONFIG_...)
integrity: remove unneeded, broken attempt to add -fshort-wchar
modpost: fix static EXPORT_SYMBOL warnings for UML build
kbuild: correct formatting of header in kbuild module docs
kbuild: remove SUBDIRS support
kbuild: remove ar-option and KBUILD_ARFLAGS
Linus Torvalds [Sat, 5 Oct 2019 19:53:27 +0000 (12:53 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twelve patches mostly small but obvious fixes or cosmetic but small
updates"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix Nport ID display value
scsi: qla2xxx: Fix N2N link up fail
scsi: qla2xxx: Fix N2N link reset
scsi: qla2xxx: Optimize NPIV tear down process
scsi: qla2xxx: Fix stale mem access on driver unload
scsi: qla2xxx: Fix unbound sleep in fcport delete path.
scsi: qla2xxx: Silence fwdump template message
scsi: hisi_sas: Make three functions static
scsi: megaraid: disable device when probe failed after enabled device
scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
scsi: qedf: Remove always false 'tmp_prio < 0' statement
scsi: ufs: skip shutdown if hba is not powered
scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
Linus Torvalds [Sat, 5 Oct 2019 19:03:27 +0000 (12:03 -0700)]
Merge branch 'readdir' (readdir speedup and sanity checking)
This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space. And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.
I really wanted to do this during the merge window, but didn't have
time. The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.
It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned. But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.
* branch 'readdir':
Make filldir[64]() verify the directory entry filename is valid
Convert filldir[64]() from __put_user() to unsafe_put_user()
Linus Torvalds [Sat, 5 Oct 2019 18:32:52 +0000 (11:32 -0700)]
Make filldir[64]() verify the directory entry filename is valid
This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().
This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.
There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.
There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption. It's really more
"protect user space from bad behavior" as pointed out by Jann. But
since Eric Biederman looked up the POSIX wording, here it is for context:
"From readdir:
The readdir() function shall return a pointer to a structure
representing the directory entry at the current position in the
directory stream specified by the argument dirp, and position the
directory stream at the next entry. It shall return a null pointer
upon reaching the end of the directory stream. The structure dirent
defined in the <dirent.h> header describes a directory entry.
From definitions:
3.129 Directory Entry (or Link)
An object that associates a filename with a file. Several directory
entries can associate names with the same file.
...
3.169 Filename
A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
characters composing the name may be selected from the set of all
character values excluding the slash character and the null byte. The
filenames dot and dot-dot have special meaning. A filename is
sometimes referred to as a 'pathname component'."
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.
We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')
See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.
Linus Torvalds [Sun, 22 May 2016 04:59:07 +0000 (21:59 -0700)]
Convert filldir[64]() from __put_user() to unsafe_put_user()
We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.
Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.
So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface. Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.
This also makes the dirent name copy use unsafe_put_user() with a couple
of macros. We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.
Note that this doesn't bother with the legacy cases. Nobody should use
them anyway, so performance doesn't really matter there.
1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.
2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
Dumazet.
3) txq null deref in mac80211, from Miaoqing Pan.
4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.
5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.
6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.
7) Various xgmac fixes in stmmac driver from Jose Abreu.
8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
Michal Kubecek.
9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.
10) Fix sleep while atomic in sja1105, from Vladimir Oltean.
11) Suspend/resume deadlock in stmmac, from Thierry Reding.
12) Various UDP GSO fixes from Josh Hunt.
13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
Dumazet.
14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.
15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
selftests/net: add nettest to .gitignore
net: qlogic: Fix memory leak in ql_alloc_large_buffers
nfc: fix memory leak in llcp_sock_bind()
sch_dsmark: fix potential NULL deref in dsmark_init()
net: phy: at803x: use operating parameters from PHY-specific status
net: phy: extract pause mode
net: phy: extract link partner advertisement reading
net: phy: fix write to mii-ctrl1000 register
ipv6: Handle missing host route in __ipv6_ifa_notify
net: phy: allow for reset line to be tied to a sleepy GPIO controller
net: ipv4: avoid mixed n_redirects and rate_tokens usage
r8152: Set macpassthru in reset_resume callback
cxgb4:Fix out-of-bounds MSI-X info array access
Revert "ipv6: Handle race in addrconf_dad_work"
net: make sock_prot_memory_pressure() return "const char *"
rxrpc: Fix rxrpc_recvmsg tracepoint
qmi_wwan: add support for Cinterion CLS8 devices
tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
lib: textsearch: fix escapes in example code
udp: only do GSO if # of segs > 1
...
Linus Torvalds [Sat, 5 Oct 2019 15:44:02 +0000 (08:44 -0700)]
Merge tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- defconfig updates
- Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
constraint for function arguments. Two kvm changes acked-by Christian
Borntraeger.
- Fix -Wunused-but-set-variable warnings in mm code.
- Avoid a constant misuse in qdio.
- Handle a case when cpumf is temporarily unavailable.
* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390: mark __insn32_query() as __always_inline
KVM: s390: fix __insn32_query() inline assembly
s390: update defconfigs
s390/pci: mark function(s) __always_inline
s390/mm: mark function(s) __always_inline
s390/jump_label: mark function(s) __always_inline
s390/cpu_mf: mark function(s) __always_inline
s390/atomic,bitops: mark function(s) __always_inline
s390/mm: fix -Wunused-but-set-variable warnings
s390: mark __cpacf_query() as __always_inline
s390/qdio: clarify size of the QIB parm area
s390/cpumf: Fix indentation in sampling device driver
s390/cpumsf: Check for CPU Measurement sampling
s390/cpumf: Use consistant debug print format
Heiko Carstens [Wed, 2 Oct 2019 12:34:37 +0000 (14:34 +0200)]
KVM: s390: mark __insn32_query() as __always_inline
__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Heiko Carstens [Wed, 2 Oct 2019 12:24:47 +0000 (14:24 +0200)]
KVM: s390: fix __insn32_query() inline assembly
The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.
Fix and simplify the code and just use a "memory" clobber.
Fixes: d668139718a9 ("KVM: s390: provide query function for instructions returning 32 byte") Cc: stable@vger.kernel.org # v5.2+ Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Restore original invalid input check in dma_common_free_remap() to
avoid this problem.
Fixes: 5cf4537975bb ("dma-mapping: introduce a dma_common_find_pages helper") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[hch: just revert the offending hunk instead of creating a new helper] Signed-off-by: Christoph Hellwig <hch@lst.de>
Dmitry Goldin [Fri, 4 Oct 2019 10:40:07 +0000 (10:40 +0000)]
kheaders: make headers archive reproducible
In commit 43d8ce9d65a5 ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.
The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.
In commit f7b101d33046 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Masahiro Yamada [Thu, 3 Oct 2019 02:36:29 +0000 (11:36 +0900)]
kbuild: update compile-test header list for v5.4-rc2
Commit 6dc280ebeed2 ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Masahiro Yamada [Tue, 1 Oct 2019 12:17:24 +0000 (21:17 +0900)]
scripts/setlocalversion: clear local variable to make it work for sh
Geert Uytterhoeven reports a strange side-effect of commit 858805b336be
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.
[Steps to Reproduce]
$ echo bar > localversion
$ mkdir build
$ cd build/
$ echo foo > localversion
$ make -s -f ../Makefile defconfig include/config/kernel.release
$ cat include/config/kernel.release
5.4.0-rc1foofoobar
This comes down to the behavior change of local variables.
The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
When a variable is made local, it inherits the initial value and
exported and readonly flags from the variable with the same name
in the surrounding scope, if there is one. Otherwise, the variable
is initially unset.
[Test Code]
foo ()
{
local res
echo "res: $res"
}
res=1
foo
[Result]
$ sh test.sh
res: 1
$ bash test.sh
res:
So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.
Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.
Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).
Fixes: 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Jacob Keller [Fri, 27 Sep 2019 23:30:27 +0000 (16:30 -0700)]
namespace: fix namespace.pl script to support relative paths
The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.
Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.
This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.
This behavior was changed in 7e1c04779efd ("kbuild: Use relative path
for $(objtree)", 2014-05-14)
Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.
Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.
The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.
rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.
Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 04:12:35 +0000 (13:12 +0900)]
video/logo: do not generate unneeded logo C files
Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.
Files listed in 'targets' are cleaned, so clean-files is unneeded.
integrity: remove unneeded, broken attempt to add -fshort-wchar
I guess commit 15ea0e1e3e18 ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.
load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:
Jakub Kicinski [Sat, 5 Oct 2019 00:36:50 +0000 (17:36 -0700)]
selftests/net: add nettest to .gitignore
nettest is missing from gitignore.
Fixes: acda655fefae ("selftests: Add nettest") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Navid Emamdoost [Fri, 4 Oct 2019 20:24:39 +0000 (15:24 -0500)]
net: qlogic: Fix memory leak in ql_alloc_large_buffers
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.
Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 30cc4587659e ("NFC: Move LLCP code to the NFC top level diirectory") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 758cc43c6d73 ("[PKT_SCHED]: Fix dsmark to apply changes consistent") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Fix regression with AR8035 speed downgrade
The following series attempts to address an issue spotted by tinywrkb
with the AR8035 on the Cubox-i2 in a situation where the PHY downgrades
the negotiated link.
This is version 2, not much has changed other than rebasing on the
current net tree. Changes have happend to patch 2 due to conflicts,
so I dropped Andrew's reviewed-by. Minor context changes to patch 4
which I don't consider important enough to warrant dropping the
reviewed-by.
Before commit 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in
genphy_read_status"), we would read not only the link partner's
advertisement, but also our own advertisement from the PHY registers,
and use both to derive the PHYs current link mode. This works when the
AR8035 downgrades the speed, because it appears that the AR8035 clears
link mode bits in the advertisement registers as part of the downgrade.
Commentary: what is not yet known is whether the AR8035 restores the
advertisement register when the link goes down to the
previous state.
However, since the above referenced commit, we no longer use the PHYs
advertisement registers, instead converting the link partner's
advertisement to the ethtool link mode array, and combine that with
phylib's cached version of our advertisement - which is not updated on
speed downgrade.
This results in phylib disagreeing with the actual operating mode of
the PHY.
Commentary: I wonder how many more PHY drivers are broken by this
commit, but have yet to be discovered.
The obvious way to address this would be to disable the downgrade
feature, and indeed this does fix the problem in tinywrkb's case - his
link partner instead downgrades the speed by reducing its
advertisement, resulting in phylib correctly evaluating a slower speed.
However, it has a serious drawback - the gigabit control register (MII
register 9) appears to become read only. It seems the only way to
update the register is to re-enable the downgrade feature, reset the
PHY, changing register 9, disable the downgrade feature, and reset the
PHY again.
This series attempts to address the problem using a different approach,
similar to the approach taken with Marvell PHYs. The AR8031, AR8033
and AR8035 have a PHY-Specific Status register which reports the
actual operating mode of the PHY - both speed and duplex. This
register correctly reports the operating mode irrespective of whether
autoneg is enabled or not. We use this register to fill in phylib's
speed and duplex parameters.
In detail:
Patch 1 fixes a bug where writing to register 9 does not update
phylib's advertisement mask in the same way that writing register 4
does; this looks like an omission from when gigabit PHY support came
into being.
Patch 2 seperates the generic phylib code which reads the link partners
advertisement from the PHY, so that we can re-use this in the Atheros
PHY driver.
Patch 3 seperates the generic phylib pause mode; phylib provides no
help for MAC drivers to ascertain the negotiated pause mode, it merely
copies the link partner's pause mode bits into its own variables.
Commentary: Both the aforementioned Atheros PHYs and Marvell PHYs
provide the resolved pause modes in terms of whether
we should transmit pause frames, or whether we should
allow reception of pause frames. Surely the resolution
of this should be in phylib?
Patch 4 provides the Atheros PHY driver with a private "read_status"
implementation that fills in phylib's speed and duplex settings
depending on the PHY-Specific status register. This ensures that
phylib and the MAC driver match the operating mode that the PHY has
decided to use. Since the register also gives us MDIX status, we
can trivially fill that status in as well.
Note that, although the bits mentioned in this patch for this register
match those in th Marvell PHY driver, and it is located at the same
address, the meaning of other register bits varies between the PHYs.
Therefore, I do not feel that it would be appropriate to make this some
kind of generic function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 4 Oct 2019 16:06:14 +0000 (17:06 +0100)]
net: phy: at803x: use operating parameters from PHY-specific status
Read the PHY-specific status register for the current operating mode
(speed and duplex) of the PHY. This register reflects the actual
mode that the PHY has resolved depending on either the advertisements
of autoneg is enabled, or the forced mode if autoneg is disabled.
This ensures that phylib's software state always tracks the hardware
state.
It seems both AR8033 (which uses the AR8031 ID) and AR8035 support
this status register. AR8030 is not known at the present time.
This patch depends on "net: phy: extract pause mode" and "net: phy:
extract link partner advertisement reading".
Reported-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 4 Oct 2019 16:06:09 +0000 (17:06 +0100)]
net: phy: extract pause mode
Extract the update of phylib's software pause mode state from
genphy_read_status(), so that we can re-use this functionality with
PHYs that have alternative ways to read the negotiation results.
Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 4 Oct 2019 16:06:04 +0000 (17:06 +0100)]
net: phy: extract link partner advertisement reading
Move reading the link partner advertisement out of genphy_read_status()
into its own separate function. This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.
Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 4 Oct 2019 16:05:58 +0000 (17:05 +0100)]
net: phy: fix write to mii-ctrl1000 register
When userspace writes to the MII_ADVERTISE register, we update phylib's
advertising mask and trigger a renegotiation. However, writing to the
MII_CTRL1000 register, which contains the gigabit advertisement, does
neither. This can lead to phylib's copy of the advertisement becoming
de-synced with the values in the PHY register set, which can result in
incorrect negotiation resolution.
Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in __ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.
Since the DAD sequence can not be aborted, add a check for the missing
host route in __ipv6_ifa_notify. The only way this should happen is due
to the previously mentioned race. The host route is created when the
address is added to an interface; it is only removed on a down event
where the address is kept. Add a warning if the host route is missing
AND the device is up; this is a situation that should never happen.
Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Merello [Fri, 4 Oct 2019 13:53:32 +0000 (15:53 +0200)]
net: phy: allow for reset line to be tied to a sleepy GPIO controller
mdio_device_reset() makes use of the atomic-pretending API flavor for
handling the PHY reset GPIO line.
I found no hint that mdio_device_reset() is called from atomic context
and indeed it uses usleep_range() since long time, so I would assume that
it is OK to sleep there.
This patch switch to gpiod_set_value_cansleep() in mdio_device_reset().
This is relevant if e.g. the PHY reset line is tied to a I2C GPIO
controller.
This has been tested on a ZynqMP board running an upstream 4.19 kernel and
then hand-ported on current kernel tree.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 4 Oct 2019 13:11:17 +0000 (15:11 +0200)]
net: ipv4: avoid mixed n_redirects and rate_tokens usage
Since commit c09551c6ff7f ("net: ipv4: use a dedicated counter
for icmp_v4 redirect packets") we use 'n_redirects' to account
for redirect packets, but we still use 'rate_tokens' to compute
the redirect packets exponential backoff.
If the device sent to the relevant peer any ICMP error packet
after sending a redirect, it will also update 'rate_token' according
to the leaking bucket schema; typically 'rate_token' will raise
above BITS_PER_LONG and the redirect packets backoff algorithm
will produce undefined behavior.
Fix the issue using 'n_redirects' to compute the exponential backoff
in ip_rt_send_redirect().
Note that we still clear rate_tokens after a redirect silence period,
to avoid changing an established behaviour.
The root cause predates git history; before the mentioned commit in
the critical scenario, the kernel stopped sending redirects, after
the mentioned commit the behavior more randomic.
Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: c09551c6ff7f ("net: ipv4: use a dedicated counter for icmp_v4 redirect packets") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kai-Heng Feng [Fri, 4 Oct 2019 12:51:04 +0000 (20:51 +0800)]
r8152: Set macpassthru in reset_resume callback
r8152 may fail to establish network connection after resume from system
suspend.
If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.
So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vishal Kulkarni [Thu, 3 Oct 2019 22:36:15 +0000 (04:06 +0530)]
cxgb4:Fix out-of-bounds MSI-X info array access
When fetching free MSI-X vectors for ULDs, check for the error code
before accessing MSI-X info array. Otherwise, an out-of-bounds access is
attempted, which results in kernel panic.
Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric reported tests failings with commit. After digging into it,
the bottom line is that the DAD sequence is not to be messed with.
There are too many cases that are expected to proceed regardless
of whether a device is up.
Revert the patch and I will send a different solution for the
problem Rajendra reported.
Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 3 Oct 2019 16:44:44 +0000 (17:44 +0100)]
rxrpc: Fix rxrpc_recvmsg tracepoint
Fix the rxrpc_recvmsg tracepoint to handle being called with a NULL call
parameter.
Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 4 Oct 2019 20:02:47 +0000 (13:02 -0700)]
Merge tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Ensure that exclusive-load reservations are terminated after system
call or exception handling. This primarily affects QEMU, which does
not expire load reservations.
- Fix an issue primarily affecting RV32 platforms that can cause the DT
header to be corrupted, causing boot failures.
* tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix memblock reservation for device tree blob
RISC-V: Clear load reservations while restoring hart contexts
Paul Burton [Fri, 4 Oct 2019 17:41:02 +0000 (17:41 +0000)]
MIPS: fw/arc: Remove unused addr variable
The addr variable in prom_free_prom_memory() has been unused since
commit 0df1007677d5 ("MIPS: fw: Record prom memory"), leading to a
compiler warning:
Linus Torvalds [Fri, 4 Oct 2019 18:17:51 +0000 (11:17 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
Linus Torvalds [Fri, 4 Oct 2019 18:13:09 +0000 (11:13 -0700)]
Merge tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
- a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some
cases, plus a follow-on cleanup series for that driver
- a patch for introducing non-blocking EFI callbacks in Xen's EFI
driver, plu a cleanup patch for Xen EFI handling merging the x86 and
ARM arch specific initialization into the Xen EFI driver
- a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning
up after a user process has died
- a fix for Xen on ARM after removal of ZONE_DMA
- a cleanup patch for avoiding build warnings for Xen on ARM
* tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix self-deadlock after killing user process
xen/efi: have a common runtime setup function
arm: xen: mm: use __GPF_DMA32 for arm64
xen/balloon: Clear PG_offline in balloon_retrieve()
xen/balloon: Mark pages PG_offline in balloon_append()
xen/balloon: Drop __balloon_append()
xen/balloon: Set pages PageOffline() in balloon_add_region()
ARM: xen: unexport HYPERVISOR_platform_op function
xen/efi: Set nonblocking callbacks
Linus Torvalds [Fri, 4 Oct 2019 17:36:31 +0000 (10:36 -0700)]
Merge tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull copy_struct_from_user() helper from Christian Brauner:
"This contains the copy_struct_from_user() helper which got split out
from the openat2() patchset. It is a generic interface designed to
copy a struct from userspace.
The helper will be especially useful for structs versioned by size of
which we have quite a few. This allows for backwards compatibility,
i.e. an extended struct can be passed to an older kernel, or a legacy
struct can be passed to a newer kernel. For the first case (extended
struct, older kernel) the new fields in an extended struct can be set
to zero and the struct safely passed to an older kernel.
The most obvious benefit is that this helper lets us get rid of
duplicate code present in at least sched_setattr(), perf_event_open(),
and clone3(). More importantly it will also help to ensure that users
implementing versioning-by-size end up with the same core semantics.
This point is especially crucial since we have at least one case where
versioning-by-size is used but with slighly different semantics:
sched_setattr(), perf_event_open(), and clone3() all do do similar
checks to copy_struct_from_user() while rt_sigprocmask(2) always
rejects differently-sized struct arguments.
With this pull request we also switch over sched_setattr(),
perf_event_open(), and clone3() to use the new helper"
* tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
usercopy: Add parentheses around assignment in test_copy_struct_from_user
perf_event_open: switch to copy_struct_from_user()
sched_setattr: switch to copy_struct_from_user()
clone3: switch to copy_struct_from_user()
lib: introduce copy_struct_from_user() helper
Linus Torvalds [Fri, 4 Oct 2019 17:18:56 +0000 (10:18 -0700)]
Merge tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3/pidfd fixes from Christian Brauner:
"This contains a couple of fixes:
- Fix pidfd selftest compilation (Shuah Kahn)
Due to a false linking instruction in the Makefile compilation for
the pidfd selftests would fail on some systems.
- Fix compilation for glibc on RISC-V systems (Seth Forshee)
In some scenarios linux/uapi/linux/sched.h is included where
__ASSEMBLY__ is defined causing a build failure because struct
clone_args was not guarded by an #ifndef __ASSEMBLY__.
- Add missing clone3() and struct clone_args kernel-doc (Christian Brauner)
clone3() and struct clone_args were missing kernel-docs. (The goal
is to use kernel-doc for any function or type where it's worth it.)
For struct clone_args this also contains a comment about the fact
that it's versioned by size"
* tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
sched: add kernel-doc for struct clone_args
fork: add kernel-doc for clone3
selftests: pidfd: Fix undefined reference to pthread_create()
sched: Add __ASSEMBLY__ guards around struct clone_args
Linus Torvalds [Fri, 4 Oct 2019 17:12:37 +0000 (10:12 -0700)]
Merge tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Been offline for 3 days, got back and had some fixes queued up.
Nothing too major, the i915 dp-mst fix is important, and amdgpu has a
bulk move speedup fix and some regressions, but nothing too insane for
an rc2 pull. The intel fixes are also 2 weeks worth, they missed the
boat last week.
core:
- writeback fixes
i915:
- Fix DP-MST crtc_mask
- Fix dsc dpp calculations
- Fix g4x sprite scaling stride check with GTT remapping
- Fix concurrence on cases where requests where getting retired at
same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor
sprite with dumb buffers.
komeda:
- memory leak fix
tilcdc:
- include fix
amdgpu:
- Enable bulk moves
- Power metrics fixes for Navi
- Fix S4 regression
- Add query for tcc disabled mask
- Fix several leaks in error paths
- randconfig fixes
- clang fixes"
* tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits)
Revert "drm/i915: Fix DP-MST crtc_mask"
drm/omap: fix max fclk divider for omap36xx
drm/i915: Fix g4x sprite scaling stride check with GTT remapping
drm/i915/dp: Fix dsc bpp calculations, v5.
drm/amd/display: fix dcn21 Makefile for clang
drm/amd/display: hide an unused variable
drm/amdgpu: display_mode_vba_21: remove uint typedef
drm/amdgpu: hide another #warning
drm/amdgpu: make pmu support optional, again
drm/amd/display: memory leak
drm/amdgpu: fix multiple memory leaks in acp_hw_init
drm/amdgpu: return tcc_disabled_mask to userspace
drm/amdgpu: don't increment vram lost if we are in hibernation
Revert "drm/amdgpu: disable stutter mode for renoir"
drm/amd/powerplay: add sensor lock support for smu
drm/amd/powerplay: change metrics update period from 1ms to 100ms
drm/amdgpu: revert "disable bulk moves for now"
drm/tilcdc: include linux/pinctrl/consumer.h again
drm/komeda: prevent memory leak in komeda_wb_connector_add
drm: Clear the fence pointer when writeback job signaled
...
Linus Torvalds [Fri, 4 Oct 2019 16:56:51 +0000 (09:56 -0700)]
Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Mandate timespec64 for the io_uring timeout ABI (Arnd)
- Set of NVMe changes via Sagi:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John
- Two s390 dasd fixes (Jan, Stefan)
- Have loop change block size in DIO mode (Martijn)
- paride pg header ifdef guard (Masahiro)
- Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
devices and suboptimal performance on others (Ming)
* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
block: sed-opal: fix sparse warning: convert __be64 data
block: sed-opal: fix sparse warning: obsolete array init.
block: pg: add header include guard
Revert "s390/dasd: Add discard support for ESE volumes"
s390/dasd: Fix error handling during online processing
io_uring: use __kernel_timespec in timeout ABI
loop: change queue block size to match when using DIO
blk-mq: apply normal plugging for HDD
blk-mq: honor IO scheduler for multiqueue devices
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
...
Qian Cai [Thu, 3 Oct 2019 21:36:36 +0000 (17:36 -0400)]
s390/mm: fix -Wunused-but-set-variable warnings
Convert two functions to static inline to get ride of W=1 GCC warnings
like,
mm/gup.c: In function 'gup_pte_range':
mm/gup.c:1816:16: warning: variable 'ptem' set but not used
[-Wunused-but-set-variable]
pte_t *ptep, *ptem;
^~~~
mm/mmap.c: In function 'acct_stack_growth':
mm/mmap.c:2322:16: warning: variable 'new_start' set but not used
[-Wunused-but-set-variable]
unsigned long new_start;
^~~~~~~~~
Jiri Kosina [Tue, 1 Oct 2019 20:08:01 +0000 (22:08 +0200)]
s390: mark __cpacf_query() as __always_inline
arch/s390/kvm/kvm-s390.c calls on several places __cpacf_query() directly,
which makes it impossible to meet the "i" constraint for the asm operands
(opcode in this case).
As we are now force-enabling CONFIG_OPTIMIZE_INLINING on all
architectures, this causes a build failure on s390:
In file included from arch/s390/kvm/kvm-s390.c:44:
./arch/s390/include/asm/cpacf.h: In function '__cpacf_query':
./arch/s390/include/asm/cpacf.h:179:2: warning: asm operand 3 probably doesn't match constraints
179 | asm volatile(
| ^~~
./arch/s390/include/asm/cpacf.h:179:2: error: impossible constraint in 'asm'
Mark __cpacf_query() as __always_inline in order to fix that, analogically
how we fixes __cpacf_check_opcode(), cpacf_query_func() and scpacf_query()
already.
Reported-and-tested-by: Michal Kubecek <mkubecek@suse.cz> Fixes: d83623c5eab2 ("s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline") Fixes: e60fb8bf68d4 ("s390/cpacf: mark scpacf_query() as __always_inline") Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Fixes: 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/lkml/nycvar.YFH.7.76.1910012203010.13160@cbobk.fhfr.pm Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Paolo Bonzini [Tue, 1 Oct 2019 13:33:07 +0000 (15:33 +0200)]
KVM: x86: omit "impossible" pmu MSRs from MSR list
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18
contiguous MSR indices reserved by Intel for event selectors.
Since some machines actually have MSRs past the reserved range,
filtering them against x86_pmu.num_counters_gp may have false
positives. Cut the list to 18 entries to avoid this.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jim Mattson <jamttson@google.com> Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]", 2019-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Burton [Thu, 3 Oct 2019 22:46:36 +0000 (22:46 +0000)]
MIPS: pmcs-msp71xx: Remove unused addr variable
The addr variable in prom_free_prom_memory() has been unused since
commit b3c948e2c00f ("MIPS: msp: Record prom memory"), causing a warning
& build failure due to -Werror. Remove the unused variable.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b3c948e2c00f ("MIPS: msp: Record prom memory") Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org
Commit b3c948e2c00f ("MIPS: msp: Record prom memory") introduced use of
a MAX_PROM_MEM value but didn't define it. A bounds check in
prom_meminit() suggests its value was supposed to be 5, so define it as
such & adjust the bounds check to use the macro rather than a magic
number.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b3c948e2c00f ("MIPS: msp: Record prom memory") Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org
Eric Sandeen [Wed, 2 Oct 2019 21:17:54 +0000 (16:17 -0500)]
vfs: Fix EOVERFLOW testing in put_compat_statfs64
Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits.
As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file
counts even with -D_FILE_OFFSET_BITS=64 set.
In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.
This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.
Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Thu, 3 Oct 2019 02:23:15 +0000 (19:23 -0700)]
block: sed-opal: fix sparse warning: convert __be64 data
sparse warns about incorrect type when using __be64 data.
It is not being converted to CPU-endian but it should be.
Fixes these sparse warnings:
../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:375:20: expected unsigned long long [usertype] align
../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity
../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types)
../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba
../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba
Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Cc: Scott Bauer <scott.bauer@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: linux-block@vger.kernel.org Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:
Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.
In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.
I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.
usercopy: Add parentheses around assignment in test_copy_struct_from_user
Clang warns:
lib/test_user_copy.c:96:10: warning: using the result of an assignment
as a condition without parentheses [-Wparentheses]
if (ret |= test(umem_src == NULL, "kmalloc failed"))
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_user_copy.c:96:10: note: place parentheses around the
assignment to silence this warning
if (ret |= test(umem_src == NULL, "kmalloc failed"))
^
( )
lib/test_user_copy.c:96:10: note: use '!=' to turn this compound
assignment into an inequality comparison
if (ret |= test(umem_src == NULL, "kmalloc failed"))
^~
!=
Add the parentheses as it suggests because this is intentional.
Eric Dumazet [Thu, 3 Oct 2019 03:19:59 +0000 (20:19 -0700)]
tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
Apparently a refactoring patch brought a bug, that was caught
by syzbot [1]
Original code was correct, do not try to be smarter than the
compiler :/
[1]
BUG: KASAN: slab-out-of-bounds in tcp_zerocopy_receive net/ipv4/tcp.c:1807 [inline]
BUG: KASAN: slab-out-of-bounds in do_tcp_getsockopt.isra.0+0x2c6c/0x3120 net/ipv4/tcp.c:3654
Read of size 4 at addr ffff8880943cf188 by task syz-executor.2/17508
Fixes: d8e18a516f8f ("net: Use skb accessors in network core") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 3 Oct 2019 18:17:57 +0000 (11:17 -0700)]
Merge tag 'kgdb-5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb update from Daniel Thompson:
"This is just a single patch adding a new reviewer for kgdb. New
reviewers will be a big help so I decided to consider this to be a
fix!
I'm looking forward to working more closely with Doug"
* tag 'kgdb-5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
Olof Johansson [Thu, 3 Oct 2019 16:15:17 +0000 (09:15 -0700)]
Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:
- The recent ti-sysc interconnect target module driver changes had
incorrect clock bits for both clocks and dts that cause warnings
- For omap3-gta04, gpio changes caused the LCD to break a while back,
and after discussing things the right fix is to set spi-cs-high
- Recent omapdrm changes to use generic panels caused tfp410 to be
disabled as we now must enable the generic support for it in
defconfig
- Recent omapdrm and backlight changes also finally made droid4 LCD
to work, so let's enable it in the defconfig it can be used out
of the box. This is not strictly a fix, but we still also have the
older CONFIG_MFD_TI_LMU options available so this cuts down the
confusion for trying to guess which display and which backlight
is needed
- Recent ti-sysc interconnect target module changes need the gpio
module disabled on some boards, but this now needs to happen at
the module level, not at the gpio driver level
- Recent changes to probe system timers with ti-sysc caused warnings
about mismatch in syconfig registers, so let's configure the option
for RESET_STATUS as available in the TRMs
- Recent changes to probe LCDC with ti-sysc caused warnings about
mismatch in sysconfig registers, so let's configure the missing
idlemodes for both platform data and dts as documented in TRMs
- Since we moved mach-omap2 to probe with device tree, we've been
getting voltage controller warnings. Turns out this code is no
longer needed, so let's just remove omap2_set_init_voltage() to
get rid of the pointless warnings
- Configure am4372 dispc memory bandwidth to avoid underflow errors
* tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372: Set memory bandwidth limit for DISPC
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
ARM: dts: Fix wrong clocks for dra7 mcasp
clk: ti: dra7: Fix mcasp8 clock bits
Randy Dunlap [Thu, 3 Oct 2019 00:08:18 +0000 (17:08 -0700)]
lib: textsearch: fix escapes in example code
This textsearch code example does not need the '\' escapes and they can
be misleading to someone reading the example. Also, gcc and sparse warn
that the "\%d" is an unknown escape sequence.
Fixes: 5968a70d7af5 ("textsearch: fix kernel-doc warnings and add kernel-api section") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Hunt [Wed, 2 Oct 2019 17:29:23 +0000 (13:29 -0400)]
udp: only do GSO if # of segs > 1
Prior to this change an application sending <= 1MSS worth of data and
enabling UDP GSO would fail if the system had SW GSO enabled, but the
same send would succeed if HW GSO offload is enabled. In addition to this
inconsistency the error in the SW GSO case does not get back to the
application if sending out of a real device so the user is unaware of this
failure.
With this change we only perform GSO if the # of segments is > 1 even
if the application has enabled segmentation. I've also updated the
relevant udpgso selftests.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Hunt [Wed, 2 Oct 2019 17:29:22 +0000 (13:29 -0400)]
udp: fix gso_segs calculations
Commit dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload")
added gso_segs calculation, but incorrectly got sizeof() the pointer and
not the underlying data type. In addition let's fix the v6 case.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Fixes: dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload") Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Anderson [Fri, 20 Sep 2019 17:44:47 +0000 (10:44 -0700)]
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
I'm interested in kdb / kgdb and have sent various fixes over the
years. I'd like to get CCed on patches so I can be aware of them and
also help review.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Eric Dumazet [Wed, 2 Oct 2019 16:38:55 +0000 (09:38 -0700)]
ipv6: drop incoming packets having a v4mapped source address
This began with a syzbot report. syzkaller was injecting
IPv6 TCP SYN packets having a v4mapped source address.
After an unsuccessful 4-tuple lookup, TCP creates a request
socket (SYN_RECV) and calls reqsk_queue_hash_req()
reqsk_queue_hash_req() calls sk_ehashfn(sk)
At this point we have AF_INET6 sockets, and the heuristic
used by sk_ehashfn() to either hash the IPv4 or IPv6 addresses
is to use ipv6_addr_v4mapped(&sk->sk_v6_daddr)
For the particular spoofed packet, we end up hashing V4 addresses
which were not initialized by the TCP IPv6 stack, so KMSAN fired
a warning.
I first fixed sk_ehashfn() to test both source and destination addresses,
but then faced various problems, including user-space programs
like packetdrill that had similar assumptions.
Instead of trying to fix the whole ecosystem, it is better
to admit that we have a dual stack behavior, and that we
can not build linux kernels without V4 stack anyway.
The dual stack API automatically forces the traffic to be IPv4
if v4mapped addresses are used at bind() or connect(), so it makes
no sense to allow IPv6 traffic to use the same v4mapped class.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
KVM: nVMX: Fix consistency check on injected exception error code
Current versions of Intel's SDM incorrectly state that "bits 31:15 of
the VM-Entry exception error-code field" must be zero. In reality, bits
31:16 must be zero, i.e. error codes are 16-bit values.
The bogus error code check manifests as an unexpected VM-Entry failure
due to an invalid code field (error number 7) in L1, e.g. when injecting
a #GP with error_code=0x9f00.
Nadav previously reported the bug[*], both to KVM and Intel, and fixed
the associated kvm-unit-test.
Reported-by: Nadav Amit <namit@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Oct 2019 13:18:26 +0000 (15:18 +0200)]
KVM: x86: omit absent pmu MSRs from MSR list
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous
MSR indices reserved by Intel for event selectors. Since some machines
actually have MSRs past the reserved range, these may survive the
filtering of msrs_to_save array and would be rejected by KVM_GET/SET_MSR.
To avoid this, cut the list to whatever CPUID reports for the host's
architectural PMU.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jim Mattson <jmattson@google.com> Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]", 2019-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shuah Khan [Wed, 2 Oct 2019 23:14:30 +0000 (17:14 -0600)]
selftests: kvm: Fix libkvm build error
Fix the following build error from "make TARGETS=kvm kselftest":
libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
This error is seen when build is done from the main Makefile using
kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
are defined.
When build is invoked using:
"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
aren't defined.
There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the
check to determine if --no-pie is necessary, which is the case when these
two aren't defined when "make -C tools/testing/selftests/kvm" runs.
Fix it by simplifying the no-pie-option logic. With this change, both
build variations work.
Tomi Valkeinen [Wed, 2 Oct 2019 12:25:42 +0000 (15:25 +0300)]
drm/omap: fix max fclk divider for omap36xx
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk
(in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not
correct, and using divider of 32 breaks DSS with a flood or underflows
and sync losts. Dividers up to 31 seem to work fine.
There is another patch to the DT files to limit the divider correctly,
but as the DSS driver also needs to know the maximum divider to be able
to iteratively find good rates, we also need to do the fix in the DSS
driver.
projects / mirror_ubuntu-kernels.git / log