Arvind Yadav [Tue, 22 Aug 2017 18:11:12 +0000 (23:41 +0530)]
net: amd: constify zorro_device_id
zorro_device_id are not supposed to change at runtime. All functions
working with zorro_device_id provided by <linux/zorro.h> work with
const zorro_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
I removed the GoP interrupt and PHY optional parts in this v2 to ease
the review process as the MAC/GoP initialization seemed to start less
discussions :)
This series now only aims at making the PPv2 driver less depending on
the firmware/bootloader initialization. Some patches cleanup some parts
as well, and add new interface descriptions in the dt.
The current implementation of the PPv2 driver relies on the
firmware/bootloader initialization to configure some parts, as the Group
of Ports (GoP) and the MACs (GMAC and/or XLG MAC --for 10G--). The
drawback is the kernel must be configured to match exactly what the
bootloader configures which is not convenient and is an issue when using
boards having an Ethernet port and an SFP port wired to the same GoP
port, as no dynamic configuration can be done.
This series adds the GoP and GMAC/XLG MAC initializations so that the
PPV2 does not have to rely on a previous initialization. One part is
still missing from this series, and that would be the 'comphy' which
provides shared serdes PHYs and which must be configured as well for a
full kernel initialization to work. This comphy support will be part of
a following up series. (This series was also tested with this 'comphy'
support, as it's nearly ready).
@Dave: patches 9 and 10 should go through the mvebu tree. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:28 +0000 (19:08 +0200)]
Documentation/bindings: net: marvell-pp2: add the system controller
This patch documents the new marvell,system-controller property used by
the Marvell ppv2 network driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:27 +0000 (19:08 +0200)]
net: mvpp2: initialize the GoP
The patch adds GoP (group of ports) initialization functions. The mvpp2
driver was relying on the firmware/bootloader initialization; this patch
moves this setup to the mvpp2 driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Tue, 22 Aug 2017 17:08:26 +0000 (19:08 +0200)]
net: mvpp2: set maximum packet size for 10G ports
Set maximum packet size for XLG 10G ports. Missing maximum packet size
for XLG configuration will cause kernel panic if oversized packet is
received by port.
Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:25 +0000 (19:08 +0200)]
net: mvpp2: initialize the XLG MAC when using a port
This adds a routine to initialize the XLG MAC at the port level when
using a port and the XAUI/10GKR interface mode. This wasn't done until
this commit, and the mvpp2 driver was relying on the bootloader/firmware
initialization. This doesn't mean everything is configured in the mvpp2
driver now, but it helps reducing the gap.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:24 +0000 (19:08 +0200)]
net: mvpp2: initialize the GMAC when using a port
This adds a routine to initialize the GMAC at the port level when using
a port. This wasn't done until this commit, and the mvpp2 driver was
relying on the bootloader/firmware initialization. This doesn't mean
everything is configured in the mvpp2 driver now, but it helps reducing
the gap.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:23 +0000 (19:08 +0200)]
net: mvpp2: move the mii configuration in the ndo_open path
This moves the mii configuration in the ndo_open path, to allow handling
different mii configurations later and to switch between these
configurations at runtime.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Ténart [Tue, 22 Aug 2017 17:08:22 +0000 (19:08 +0200)]
net: mvpp2: fix the synchronization module bypass macro name
The macro defining the bit to toggle to bypass or not the
synchronization module is wrongly named. Writing 1 will disable bypass.
This patch s/MVPP22_CTRL4_SYNC_BYPASS/MVPP22_CTRL4_SYNC_BYPASS_DIS/.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cosmetic patch to use the same formatting rules on all register
definitions.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Tue, 22 Aug 2017 16:40:28 +0000 (09:40 -0700)]
gre: introduce native tunnel support for ERSPAN
The patch adds ERSPAN type II tunnel support. The implementation
is based on the draft at [1]. One of the purposes is for Linux
box to be able to receive ERSPAN monitoring traffic sent from
the Cisco switch, by creating a ERSPAN tunnel device.
In addition, the patch also adds ERSPAN TX, so Linux virtual
switch can redirect monitored traffic to the ERSPAN tunnel device.
The traffic will be encapsulated into ERSPAN and sent out.
The implementation reuses tunnel key as ERSPAN session ID, and
field 'erspan' as ERSPAN Index fields:
./ip link add dev ers11 type erspan seq key 100 erspan 123 \
local 172.16.1.200 remote 172.16.1.100
To use the above device as ERSPAN receiver, configure
Nexus 5000 switch as below:
monitor session 100 type erspan-source
erspan-id 123
vrf default
destination ip 172.16.1.200
source interface Ethernet1/11 both
source interface Ethernet1/12 both
no shut
monitor erspan origin ip-address 172.16.1.100 global
[1] https://tools.ietf.org/html/draft-foschiano-erspan-01
[2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2
[3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2
Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Tue, 22 Aug 2017 06:33:49 +0000 (23:33 -0700)]
tcp: Remove the unused parameter for tcp_try_fastopen.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Tue, 22 Aug 2017 06:33:48 +0000 (23:33 -0700)]
tcp: Get a proper dst before checking it.
tcp_peer_is_proven needs a proper route to make the
determination, but dst always is NULL. This bug may
be there at the beginning of git tree. This does not
look serious enough to deserve backports to stable
versions.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
hv_netvsc: Ethtool handler to change UDP hash levels
The patch set adds the functions to switch UDP hash level between
L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.
The ethtool callback function is triggered by command line, and
update the per device variables of the hash level.
On Azure, fragmented UDP packets is not yet supported with L4
hashing, and may have high packet loss rate. Using L3 hashing is
recommended in this case. This ethtool option allows a user to
make this selection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Tue, 22 Aug 2017 02:22:39 +0000 (19:22 -0700)]
hv_netvsc: Add ethtool handler to set and get UDP hash levels
The patch add the functions to switch UDP hash level between
L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.
On Azure, fragmented UDP packets have high loss rate with L4
hashing. Using L3 hashing is recommended in this case.
For example, for UDP over IPv4 on eth0:
To include UDP port numbers in hasing:
ethtool -N eth0 rx-flow-hash udp4 sdfn
To exclude UDP port numbers in hasing:
ethtool -N eth0 rx-flow-hash udp4 sd
To show UDP hash level:
ethtool -n eth0 rx-flow-hash udp4
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
liquidio: VF driver will notify NIC firmware of MTU change
Make VF driver notify NIC firmware of MTU change. Firmware needs this
information for MTU propagation and enforcement.
The first patch in this series moves a macro definition to a proper place
to prevent a build error in the second patch which has the code that sends
the notification.
Change Log:
V1 -> V2
* Add "From:" line to patch #1 and #2 to give credit to the author.
* In patch #2, order local variable declarations from longest to
shortest line.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
liquidio: make VF driver notify NIC firmware of MTU change
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The macro LIO_CMD_WAIT_TM is not specific to the PF driver; it can be used
by the VF driver too, so move its definition from a PF-specific header file
to one that's common to PF and VF.
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Mon, 21 Aug 2017 16:05:24 +0000 (17:05 +0100)]
net: hns3: Add support to change MTU in HNS3 hardware
This patch adds the following support to the HNS3 driver:
1. Support to change the Maximum Transmission Unit of a
port in the HNS NIC hardware.
2. Initializes the supported MTU range for the netdevice.
Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Aug 2017 17:48:54 +0000 (10:48 -0700)]
Merge branch 'Huawei-HiNIC-Ethernet-Driver'
Aviad Krawczyk says:
====================
Huawei HiNIC Ethernet Driver
The patch-set contains the support of the HiNIC Ethernet driver for
hinic family of PCIE Network Interface Cards.
The Huawei's PCIE HiNIC card is a new Ethernet card and hence there was
a need of a new driver.
The current driver is meant to be used for the Physical Function and there
would soon be a support for Virtual Function and more features once the
basic PF driver has been accepted.
Changes V7 -> V8:
1. Remove unnecessary cast from void * - Stephen Hemminger comment
https://lkml.org/lkml/2017/8/17/1008
Changes V6 -> V7:
1. Separate netpoll and MAINTAINERS patch - Sergei Shtylyov comment
https://lkml.org/lkml/2017/8/17/479
Changes V5 -> V6:
1. Fix cover letter Message-Id
Changes V4 -> V5:
1. Remove select_queue NOP - David Miller comment
https://lkml.org/lkml/2017/8/16/625
Changes V3 -> V4:
1. Reverse christmas tree order - David Miller comment
https://lkml.org/lkml/2017/8/3/862
Changes V2 -> V3:
1. Replace dev_ functions by netif_ functions - Joe Perches comment
https://lkml.org/lkml/2017/7/19/424
2. Fix the driver directory in MAINTAINERS file - Sergei Shtylyov comment
https://lkml.org/lkml/2017/7/19/615
3. Add a newline at the end of Makefile - David Miller comment
https://lkml.org/lkml/2017/7/19/1345
4. Return a pointer as a val instead of in arg - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
5. Change the error labels to err_xyz - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
6. Remove check of Func Type in free function - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
7. Remove !netdev check in remove function - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
8. Use module_pci_driver - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
9. Move the PCI device ID to the .c file - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
10. Remove void * to avoid passing wrong ptr - Francois Romieu comment
https://lkml.org/lkml/2017/7/19/1319
Changes V1 -> V2:
1. remove driver verstion - Andrew Lunn comment
https://lkml.org/lkml/2017/7/12/372
2. replace kzalloc by devm_kzalloc for short clean - Andrew Lunn comment
https://lkml.org/lkml/2017/7/12/372
3. replace pr_ functions by dev_ functions - Andrew Lunn comment
https://lkml.org/lkml/2017/7/12/375
4. seperate last patch by moving ops to a new patch - Andrew Lunn comment
https://lkml.org/lkml/2017/7/12/377
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:08 +0000 (23:56 +0800)]
net-next/hinic: Add Maintainer
Update MAINTAINERS file
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:07 +0000 (23:56 +0800)]
net-next/hinic: Add netpoll
Add more netdev operation - netpoll.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:06 +0000 (23:56 +0800)]
net-next/hinic: Add ethtool and stats
Add ethtool operations and statistics operations.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:05 +0000 (23:56 +0800)]
net-next/hinic: Add Tx operation
Add transmit operation for sending data by qp operations.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:04 +0000 (23:56 +0800)]
net-next/hinic: Add Rx handler
Set the io resources in the nic and handle rx events by qp operations.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:03 +0000 (23:56 +0800)]
net-next/hinic: Add cmdq completion handler
Add cmdq completion handler for getting a notification about the
completion of cmdq commands.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:02 +0000 (23:56 +0800)]
net-next/hinic: Add cmdq commands
Add cmdq commands for setting queue pair contexts in the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:01 +0000 (23:56 +0800)]
net-next/hinic: Add ceqs
Initialize the completion event queues and handle ceq events by calling
the registered handlers. Used for cmdq command completion.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:56:00 +0000 (23:56 +0800)]
net-next/hinic: Initialize cmdq
Create the work queues for cmdq and update the nic about the work queue
contexts. cmdq commands are used for updating the nic about the qp
contexts.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:59 +0000 (23:55 +0800)]
net-next/hinic: Set qp context
Update the nic about the resources of the queue pairs.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:58 +0000 (23:55 +0800)]
net-next/hinic: Add qp resources
Create the resources for queue pair operations: doorbell area,
consumer index address and producer index address.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:57 +0000 (23:55 +0800)]
net-next/hinic: Add wq
Create work queues for being used by the queue pairs.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:56 +0000 (23:55 +0800)]
net-next/hinic: Add logical Txq and Rxq
Create the logical queues of the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:55 +0000 (23:55 +0800)]
net-next/hinic: Add Rx mode and link event handler
Add port management message for setting Rx mode in the card,
used for rx_mode netdev operation.
The link event handler is used for getting a notification about the
link state.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:54 +0000 (23:55 +0800)]
net-next/hinic: Add port management commands
Add the port management commands that are sent as management messages.
The port management commands are used for netdev operations.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:53 +0000 (23:55 +0800)]
net-next/hinic: Add aeqs
Handle aeq elements that are accumulated on the aeq by calling the
registered handler for the specific event.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:52 +0000 (23:55 +0800)]
net-next/hinic: Add api cmd commands
Add the api cmd commands for sending management messages to the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:51 +0000 (23:55 +0800)]
net-next/hinic: Add management messages
Add the management messages for sending to api cmd and the asynchronous
event handler for the completion of the messages.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:50 +0000 (23:55 +0800)]
net-next/hinic: Initialize api cmd hw
Update the hardware about api cmd resources and initialize it.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:49 +0000 (23:55 +0800)]
net-next/hinic: Initialize api cmd resources
Initialize api cmd resources as part of management initialization.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:48 +0000 (23:55 +0800)]
net-next/hinic: Initialize hw device components
Initialize hw device by calling the initialization functions of aeqs and
management channel.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aviad Krawczyk [Mon, 21 Aug 2017 15:55:47 +0000 (23:55 +0800)]
net-next/hinic: Initialize hw interface
Initialize hw interface as part of the nic initialization for accessing hw.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu [Mon, 21 Aug 2017 10:12:55 +0000 (18:12 +0800)]
net: ethernet: stmmac: dwmac-rk: Add rv1108 gmac support
It only supports rmii interface. Add constants and callback functions
for the dwmac on rv1108 socs. As can be seen, the base structure is
the same, only registers and the bits in them moved slightly.
Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shubham Bansal [Tue, 22 Aug 2017 06:32:33 +0000 (12:02 +0530)]
arm: eBPF JIT compiler
The JIT compiler emits ARM 32 bit instructions. Currently, It supports
eBPF only. Classic BPF is supported because of the conversion by BPF core.
This patch is essentially changing the current implementation of JIT compiler
of Berkeley Packet Filter from classic to internal with almost all
instructions from eBPF ISA supported except the following
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit
ARM because of deficiency of general purpose registers on ARM. Currently,
only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler.
Tested on ARMv7 with QEMU by me (Shubham Bansal).
Testing results on ARMv7:
1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed]
2) test_tag: OK (40945 tests)
3) test_progs: Summary: 30 PASSED, 0 FAILED
4) test_lpm: OK
5) test_lru_map: OK
Above tests are all done with following flags enabled discreatly.
1) bpf_jit_enable=1
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
2) bpf_jit_enable=1 and bpf_jit_harden=2
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
See Documentation/networking/filter.txt for more information.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Sun, 13 Aug 2017 21:14:58 +0000 (23:14 +0200)]
sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()
When building the kernel for Sparc using gcc 7.x, the build fails
with:
arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cmd |= PCI_COMMAND_IO;
^~
I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.
As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Fri, 18 Aug 2017 07:23:24 +0000 (15:23 +0800)]
net: sched: Add the invalid handle check in qdisc_class_find
Add the invalid handle "0" check to avoid unnecessary search, because
the qdisc uses the skb->priority as the handle value to look up, and
it is "0" usually.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Mon, 21 Aug 2017 15:59:30 +0000 (17:59 +0200)]
tipc: don't reset stale broadcast send link
When the broadcast send link after 100 attempts has failed to
transfer a packet to all peers, we consider it stale, and reset
it. Thereafter it needs to re-synchronize with the peers, something
currently done by just resetting and re-establishing all links to
all peers. This has turned out to be overkill, with potentially
unwanted consequences for the remaining cluster.
A closer analysis reveals that this can be done much simpler. When
this kind of failure happens, for reasons that may lie outside the
TIPC protocol, it is typically only one peer which is failing to
receive and acknowledge packets. It is hence sufficient to identify
and reset the links only to that peer to resolve the situation, without
having to reset the broadcast link at all. This solution entails a much
lower risk of negative consequences for the own node as well as for
the overall cluster.
We implement this change in this commit.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 21 Aug 2017 20:30:36 +0000 (13:30 -0700)]
Merge tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
* tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: Mask individual IRQ lines during core INTC init
ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
ARC: dma: implement dma_unmap_page and sg variant
ARCv2: SLC: Make sure busy bit is set properly for region ops
ARC: [plat-sim] Include this platform unconditionally
ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103
ARC: defconfig: Cleanup from old Kconfig options
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
Oleg Nesterov [Mon, 21 Aug 2017 15:35:02 +0000 (17:35 +0200)]
pids: make task_tgid_nr_ns() safe
This was reported many times, and this was even mentioned in commit 52ee2dfdd4f5 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
David Lamparter [Fri, 18 Aug 2017 12:31:35 +0000 (14:31 +0200)]
net: check type when freeing metadata dst
Commit 3fcece12bc1b ("net: store port/representator id in metadata_dst")
added a new type field to metadata_dst, but metadata_dst_free() wasn't
updated to check it before freeing the METADATA_IP_TUNNEL specific dst
cache entry.
This is not currently causing problems since it's far enough back in the
struct to be zeroed for the only other type currently in existance
(METADATA_HW_PORT_MUX), but nevertheless it's not correct.
Fixes: 3fcece12bc1b ("net: store port/representator id in metadata_dst") Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Sridhar Samudrala <sridhar.samudrala@intel.com> Cc: Simon Horman <horms@verge.net.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 17 Aug 2017 19:17:20 +0000 (12:17 -0700)]
net: ipv6: put host and anycast routes on device with address
One nagging difference between ipv4 and ipv6 is host routes for ipv6
addresses are installed using the loopback device or VRF / L3 Master
device. e.g.,
2001:db8:1::/120 dev veth0 proto kernel metric 256 pref medium
local 2001:db8:1::1 dev lo table local proto kernel metric 0 pref medium
Using the loopback device is convenient -- necessary for local tx, but
has some nasty side effects, most notably setting the 'lo' device down
causes all host routes for all local IPv6 address to be removed from the
FIB and completely breaks IPv6 networking across all interfaces.
This patch puts FIB entries for IPv6 routes against the device. This
simplifies the routes in the FIB, for example by making dst->dev and
rt6i_idev->dev the same (a future patch can look at removing the device
reference taken for rt6i_idev for FIB entries).
When copies are made on FIB lookups, the cloned route has dst->dev
set to loopback (or the L3 master device). This is needed for the
local Tx of packets to local addresses.
With fib entries allocated against the real network device, the addrconf
code that reinserts host routes on admin up of 'lo' is no longer needed.
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney [Fri, 18 Aug 2017 23:40:33 +0000 (16:40 -0700)]
MIPS,bpf: Cache value of BPF_OP(insn->code) in eBPF JIT.
The code looks a little cleaner if we replace BPF_OP(insn->code) with
the local variable bpf_op. Caching the value this way also saves 300
bytes (about 1%) in the code size of the JIT.
Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal [Mon, 21 Aug 2017 11:43:10 +0000 (17:13 +0530)]
qlogic: make device_attribute const
Make these const as they are only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Support RX checksum with IPsec crypto offload for esp4/esp6.
From Ilan Tayari.
2) Fixup IPv6 checksums when doing IPsec crypto offload.
From Yossi Kuperman.
3) Auto load the xfrom offload modules if a user installs
a SA that requests IPsec offload. From Ilan Tayari.
4) Clear RX offload informations in xfrm_input to not
confuse the TX path with stale offload informations.
From Ilan Tayari.
5) Allow IPsec GSO for local sockets if the crypto operation
will be offloaded.
6) Support setting of an output mark to the xfrm_state.
This mark can be used to to do the tunnel route lookup.
From Lorenzo Colitti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.
Rick Farrington [Sat, 19 Aug 2017 01:21:49 +0000 (18:21 -0700)]
liquidio: fix use of pf in pass-through mode in a virtual machine
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w).
If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg,
try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w).
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Sat, 19 Aug 2017 00:14:49 +0000 (17:14 -0700)]
ipv6: repair fib6 tree in failure case
In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.
net_sched: fix order of queue length updates in qdisc_replace()
This important to call qdisc_tree_reduce_backlog() after changing queue
length. Parent qdisc should deactivate class in ->qlen_notify() called from
qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.
Missed class deactivations leads to crashes/warnings at picking packets
from empty qdisc and corrupting state at reactivating this class in future.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996cc8a0 ("net_sched: introduce qdisc_replace() helper") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ibm: emac: Fix some error handling path in 'emac_probe()'
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is
known to be 0 at this point.
So return -ENODEV instead in the first case and use 'of_iomap()' instead of
the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd
case.
Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes
redundant and is removed.
While at it, turn a 'err != 0' test into an equivalent 'err' to be more
consistent.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Sun, 20 Aug 2017 08:45:51 +0000 (14:15 +0530)]
cxgb4/cxgbvf: Handle 32-bit fw port capabilities
Implement new 32-bit Firmware Port Capabilities in order to
handle new speeds which couldn't be represented in the old 16-bit
Firmware Port Capabilities values.
Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Leblond [Sun, 20 Aug 2017 19:48:14 +0000 (21:48 +0200)]
tools lib bpf: improve warning
Signed-off-by: Eric Leblond <eric@regit.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sun, 20 Aug 2017 23:48:12 +0000 (01:48 +0200)]
bpf: fix double free from dev_map_notification()
In the current code, dev_map_free() can still race with dev_map_notification().
In dev_map_free(), we remove dtab from the list of dtabs after we purged
all entries from it. However, we don't do xchg() with NULL or the like,
so the entry at that point is still pointing to the device. If a unregister
notification comes in at the same time, we therefore risk a double-free,
since the pointer is still present in the map, and then pushed again to
__dev_map_entry_free().
All this is completely unnecessary. Just remove the dtab from the list
right before the synchronize_rcu(), so all outstanding readers from the
notifier list have finished by then, thus we don't need to deal with this
corner case anymore and also wouldn't need to nullify dev entires. This is
fine because we iterate over the map releasing all entries and therefore
dev references anyway.
Fixes: 4cc7b9544b9a ("bpf: devmap fix mutex in rcu critical section") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sun, 20 Aug 2017 22:26:03 +0000 (00:26 +0200)]
bpf, doc: also add s390x as arch to sysctl description
Looks like this was accidentally missed, so still add s390x
as supported eBPF JIT arch to bpf_jit_enable.
Fixes: 014cd0a368dc ("bpf: Update sysctl documentation to list all supported architectures") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 20 Aug 2017 20:26:27 +0000 (13:26 -0700)]
Sanitize 'move_pages()' permission checks
The 'move_paghes()' system call was introduced long long ago with the
same permission checks as for sending a signal (except using
CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability).
That turns out to not be a great choice - while the system call really
only moves physical page allocations around (and you need other
capabilities to do a lot of it), you can check the return value to map
out some the virtual address choices and defeat ASLR of a binary that
still shares your uid.
So change the access checks to the more common 'ptrace_may_access()'
model instead.
This tightens the access checks for the uid, and also effectively
changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that
anybody really _uses_ this legacy system call any more (we hav ebetter
NUMA placement models these days), so I expect nobody to notice.
Famous last words.
Reported-by: Otto Ebeling <otto.ebeling@iki.fi> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 20 Aug 2017 16:36:52 +0000 (09:36 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Another pile of small fixes and updates for x86:
- Plug a hole in the SMAP implementation which misses to clear AC on
NMI entry
- Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line
parameter works correctly again
- Use the proper accessor in the startup64 code for next_early_pgt to
prevent accessing of invalid addresses and faulting in the early
boot code.
- Prevent CPU hotplug lock recursion in the MTRR code
- Unbreak CPU0 hotplugging
- Rename overly long CPUID bits which got introduced in this cycle
- Two commits which mark data 'const' and restrict the scope of data
and functions to file scope by making them 'static'"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Constify attribute_group structures
x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'
x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks
x86: Fix norandmaps/ADDR_NO_RANDOMIZE
x86/mtrr: Prevent CPU hotplug lock recursion
x86: Mark various structures and functions as 'static'
x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag
x86/smpboot: Unbreak CPU0 hotplug
x86/asm/64: Clear AC on NMI entries
Linus Torvalds [Sun, 20 Aug 2017 16:20:57 +0000 (09:20 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two fixes for the perf subsystem:
- Fix an inconsistency of RDPMC mm struct tagging across exec() which
causes RDPMC to fault.
- Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
causes incorrect timestamps and total time calculations"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix time on IOC_ENABLE
perf/x86: Fix RDPMC vs. mm_struct tracking
Linus Torvalds [Sun, 20 Aug 2017 16:07:56 +0000 (09:07 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A pile of smallish changes all over the place:
- Add a missing ISB in the GIC V1 driver
- Remove an ACPI version check in the GIC V3 ITS driver
- Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
spurious wakeups
- Remove the artifical limitation of ITS instances to the number of
NUMA nodes which prevents utilizing the ITS hardware correctly
- Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code
- Honour the force affinity argument in the GIC-V3 driver which is
required to make perf work correctly
- Correctly report allocation failures in GIC-V2/V3 to avoid using
half allocated and initialized interrupts.
- Fixup checks against nr_cpu_ids in the generic IPI code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/ipi: Fixup checks against nr_cpu_ids
genirq: Restore trigger settings in irq_modify_status()
MAINTAINERS: Remove Jason Cooper's irqchip git tree
irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
irqchip: brcmstb-l2: Define an irq_pm_shutdown function
irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
irqchip/gic-v3: Honor forced affinity setting
irqchip/gic-v3: Report failures in gic_irq_domain_alloc
irqchip/gic-v2: Report failures in gic_irq_domain_alloc
irqchip/atmel-aic: Remove root argument from ->fixup() prototype
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
Linus Torvalds [Sun, 20 Aug 2017 15:54:30 +0000 (08:54 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull watchdog fix from Thomas Gleixner:
"A fix for the hardlockup watchdog to prevent false positives with
extreme Turbo-Modes which make the perf/NMI watchdog fire faster than
the hrtimer which is used to verify.
Slightly larger than the minimal fix, which just would increase the
hrtimer frequency, but comes with extra overhead of more watchdog
timer interrupts and thread wakeups for all users.
With this change we restrict the overhead to the extreme Turbo-Mode
systems"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/watchdog: Prevent false positives with turbo modes