Stefan Agner [Tue, 4 Oct 2016 23:56:38 +0000 (16:56 -0700)]
drm/fsl-dcu: do not transfer registers on plane init
There is no need to explicitly initiate a register transfer and
turn off the DCU after initializing the plane registers. In fact,
this is harmful and leads to unnecessary flickers if the DCU has
been left on by the bootloader.
Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-By: Meng Yi <meng.yi@nxp.com>
Stefan Agner [Tue, 4 Oct 2016 23:40:14 +0000 (16:40 -0700)]
drm/fsl-dcu: enable TCON bypass mode by default
Do not use encoder disable/enable callbacks to control bypass
mode as this seems to mess with the signals not liked by
displays. This also makes more sense since the encoder is
already defined to be parallel RGB/LVDS at creation time.
Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-By: Meng Yi <meng.yi@nxp.com>
drm: Move master pointer from drm_minor to drm_device
Noticed by Chris Wilson.
Fixes: 95c081c17f28 ("drm: Move master pointer from drm_minor to drm_device") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 16 Oct 2016 23:31:52 +0000 (09:31 +1000)]
Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
Fixes for radeon and amdgpu for 4.9:
- allow an additional reg in the SI reg checker
- fix thermal sensor readback on CZ/ST
- misc bug fixes
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amd/powerplay: fix bug stop dpm can't work on Vi.
drm/amd/powerplay: notify smu no display by default.
drm/amdgpu/dpm: implement thermal sensor for CZ/ST
drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
drm/amdgpu: disable smu hw first on tear down
drm/amdgpu: fix amdgpu_need_full_reset (v2)
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amdgpu: potential NULL dereference in debugfs code
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: clarify UVD/VCE special handling for CG
drm/amd/amdgpu: enable clockgating only after late init
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
drm/amdgpu/gfx8: fix CGCG_CGLS handling
drm/radeon: fix modeset tear down code
drm/radeon: fix up dp aux tear down (v2)
...
Alex Deucher [Thu, 13 Oct 2016 20:07:03 +0000 (16:07 -0400)]
drm/amdgpu: fix amdgpu_need_full_reset (v2)
IP types are not an index. Each asic may have number and
type of IPs. Properly check the the type rather than
using the type id as an index.
v2: fix all the IPs to not use IP type as an idx as well.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Tom St Denis [Thu, 13 Oct 2016 21:46:45 +0000 (17:46 -0400)]
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 13 Oct 2016 07:32:04 +0000 (15:32 +0800)]
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 12 Oct 2016 06:17:30 +0000 (09:17 +0300)]
drm/amdgpu: potential NULL dereference in debugfs code
debugfs_create_file() returns NULL on error, it only returns error
pointers if debugfs isn't enabled in the config and we checked for that
earlier so it can't happen.
Fixes: 4f4824b55650 ('drm/amd/amdgpu: Convert ring debugfs entries to binary') Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 11 Oct 2016 10:51:16 +0000 (18:51 +0800)]
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
variable dereferenced before check it
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 11 Oct 2016 10:44:46 +0000 (18:44 +0800)]
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
add array length check to avoid buffer overflow.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 10 Oct 2016 07:57:21 +0000 (15:57 +0800)]
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Fri, 7 Oct 2016 18:48:18 +0000 (14:48 -0400)]
drm/amdgpu: clarify UVD/VCE special handling for CG
UVD and VCE CG are handled specially, however the previous
fix for this skipped late init for those blocks rather than
just CG. Just protect the CG function call. No functional
change since UVD and VCE don't currently utilize a late_init
function.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arindam Nath [Fri, 7 Oct 2016 13:31:37 +0000 (19:01 +0530)]
drm/amd/amdgpu: enable clockgating only after late init
Sometimes during multiple reboots, the system hangs
during bootup. The issue is very random and happens
once in around 50 reboots or so.
It seems if clockgating is enabled before late init,
the GFX engine sometimes does not respond.
This patch changes the ordering a little so that
both powergating and clockgating are enabled only
after late init calls.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com> Reviewed-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Mon, 10 Oct 2016 11:23:25 +0000 (13:23 +0200)]
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
Required for border colors in compute shaders.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Tue, 4 Oct 2016 07:43:30 +0000 (09:43 +0200)]
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
Ensure that we really only report a GPU reset if one has happened since the
creation of the context.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: use .early_unregister hook to remove DP AUX i2c
When DisplayPort AUX channel i2c adapter is registered, drm_connector's
kdev member is used as a parent, so we get sysfs structure like:
/drm/card1/card1-DP-2/i2c-12
Because of that, there is a problem when drm core (and not the driver)
calls drm_connector_unregister(), it removes parent sysfs entries
('card1-DP-2' in our example) while the i2c adapter is still registered.
Later we get a WARN when we try to unregister the i2c adapter:
WARNING: CPU: 3 PID: 1374 at fs/sysfs/group.c:243 sysfs_remove_group+0x14c/0x150
sysfs group ffffffff82911e40 not found for kobject 'i2c-12'
To fix it, we can use the .early_unregister hook to unregister the i2c
adapter before drm_connector's sysfs is torn down.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Tue, 11 Oct 2016 20:07:38 +0000 (06:07 +1000)]
Merge tag 'topic/drm-misc-2016-10-11' of git://anongit.freedesktop.org/drm-intel into drm-next
Just flushing out my -misc queue. Slightly important are the prime
refcount/unload fixes from Chris.
There's also the reservation stuff from Chris still pending, and Sumits
hasn't landed that yet. Might get another pull for that, but pls don't
hold up the main pull for it ;-)
* tag 'topic/drm-misc-2016-10-11' of git://anongit.freedesktop.org/drm-intel:
drm/crtc: constify drm_crtc_index parameter
drm: use the right function name in documentation
drm: Release resources with a safer function
drm: Fix up kerneldoc for new drm_gem_dmabuf_export()
drm/bridge: Drop drm_connector_unregister and call drm_connector_cleanup directly
drm/fb-helper: fix sphinx markup for DRM_FB_HELPER_DEFAULT_OPS
drm/bridge: Add RGB to VGA bridge support
drm/prime: Take a ref on the drm_dev when exporting a dma_buf
drm/prime: Pass the right module owner through to dma_buf_export()
drm/bridge: Call drm_connector_cleanup directly
drm: simple_kms_helper: Add prepare_fb and cleanup_fb hooks
drm: Release resources with a safer function
Dave Airlie [Tue, 11 Oct 2016 19:46:18 +0000 (05:46 +1000)]
Merge tag 'drm-intel-next-fixes-2016-10-11' of git://anongit.freedesktop.org/drm-intel into drm-next
A big bunch of i915 fixes for drm-next / v4.9 merge window, with more
than half of them also cc: stable. We also continue to have more Fixes:
annotations for our fixes, which should help the backporters and
archeologists.
* tag 'drm-intel-next-fixes-2016-10-11' of git://anongit.freedesktop.org/drm-intel: (27 commits)
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
drm/i915: Reset the breadcrumbs IRQ more carefully
drm/i915: Force relocations via cpu if we run out of idle aperture
drm/i915: Distinguish last emitted request from last submitted request
drm/i915: Allow DP to work w/o EDID
drm/i915: Move long hpd handling into the hotplug work
drm/i915/execlists: Reinitialise context image after GPU hang
drm/i915: Use correct index for backtracking HUNG semaphores
drm/i915: Unalias obj->phys_handle and obj->userptr
drm/i915: Just clear the mmiodebug before a register access
drm/i915/gen9: only add the planes actually affected by ddb changes
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
drm/i915/bxt: Fix HDMI DPLL configuration
drm/i915/gen9: fix the watermark res_blocks value
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
drm/i915/gen9: minimum scanlines for Y tile is not always 4
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
drm/i915/kbl: KBL also needs to run the SAGV code
drm/i915: introduce intel_has_sagv()
...
Chris Wilson [Mon, 10 Oct 2016 12:50:17 +0000 (13:50 +0100)]
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
The conflict resolution of v4.8-rc8 backmerge to drm-next pulled back in
a few lines of dead code due to the code movement around
i915_gem_reset(), fix that up.
Fixes: ca09fb9f60b5 ("Merge tag 'v4.8-rc8' into drm-next") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161010125017.23911-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 7 Oct 2016 06:53:27 +0000 (07:53 +0100)]
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
We reserve space in the GuC workqueue for submitting the request in the
future. However, if we fail to construct the request, we need to give
that reserved space back to the system.
Chris Wilson [Fri, 7 Oct 2016 06:53:26 +0000 (07:53 +0100)]
drm/i915: Reset the breadcrumbs IRQ more carefully
Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.
Chris Wilson [Fri, 7 Oct 2016 06:53:25 +0000 (07:53 +0100)]
drm/i915: Force relocations via cpu if we run out of idle aperture
If we run out of enough aperture space to fit the entire object, we
fallback to trying to insert a single page. However, if that also fails,
we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means
to userspace that their batch could not be fitted within the GTT.) Prior
to commit e8cb909ac3ab ("drm/i915: Fallback to single page GTT
mmappings for relocations") the approach is to fallback to using the
slow CPU relocation path in case of iomapping failure, and that is the
behaviour we need to restore.
Chris Wilson [Fri, 7 Oct 2016 06:53:24 +0000 (07:53 +0100)]
drm/i915: Distinguish last emitted request from last submitted request
In order not to trigger hangcheck on a idle-but-waiting engine, we need
to distinguish between the pending request queue and the actual
execution queue. This is done later in "drm/i915: Enable multiple
timelines" but for now we need a temporary fix to prevent blaming the
wrong engine for a GPU hang.
(Note that this causes a temporary subtle change in how we decide when
to allow a waitboost to be re-awarded back to the waiter, the temporary
effect is that if the wait is upon the most current execution the wait
is given for free, instead of checking to see if the client stalled
itself. This will be repaired in "drm/i915: Enable multiple timelines".)
Fixes: 0a046a0e93d2 ("drm/i915: Nonblocking request submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98104 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-1-chris@chris-wilson.co.uk
(cherry picked from commit 8687b3ec852e89630bac650f15136811c7b4c1dc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 3 Oct 2016 07:55:16 +0000 (10:55 +0300)]
drm/i915: Allow DP to work w/o EDID
Allow returning "connected" or "unknown" connector status for DP branch
devices that don't have an EDID. Currently we'd claim the thing as
"disconnected" if there is no EDID.
This stuff used to broken already, I think, but it got more broken by
commit f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: stable@vger.kernel.org Tested-by: Arno <blouin.arno@gmail.com> Fixes: f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 5cb651a7959310ef4dbb0b93f005b10286789656) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 3 Oct 2016 07:55:15 +0000 (10:55 +0300)]
drm/i915: Move long hpd handling into the hotplug work
We can't rely on connector->status in the detect() hook if the long hpd
was already handled by the dig_port_work as that won't update
connector->status. Thus we have to defer the long hpd handling entirely
until the hotplug work runs to avoid the double long hpd handling
the "detect_done" flag is trying to prevent.
We'll start to depend on connector->status being up to date in a
following patch.
Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: stable@vger.kernel.org Tested-by: Arno <blouin.arno@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 27d4efc5591a5853de54713bc717de73c8951e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Tue, 4 Oct 2016 20:11:26 +0000 (21:11 +0100)]
drm/i915/execlists: Reinitialise context image after GPU hang
On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.
Chris Wilson [Mon, 3 Oct 2016 12:45:15 +0000 (13:45 +0100)]
drm/i915: Unalias obj->phys_handle and obj->userptr
We use obj->phys_handle to choose the pread/pwrite path, but as
obj->phys_handle is a union with obj->userptr, we then mistakenly use
the phys_handle path for userptr objects within pread/pwrite.
Chris Wilson [Mon, 3 Oct 2016 12:45:14 +0000 (13:45 +0100)]
drm/i915: Just clear the mmiodebug before a register access
When we enable the per-register access mmiodebug, it is to detect which
access is illegal. Reporting on earlier untraced access outside of the
mmiodebug does not help debugging (as the suspicion is immediately put
upon the current register which is not at fault)!
Paulo Zanoni [Thu, 29 Sep 2016 19:36:48 +0000 (16:36 -0300)]
drm/i915/gen9: only add the planes actually affected by ddb changes
We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch
Fixes: 05a76d3d6ad1 ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888 Cc: Mike Lothian <mike@fireburn.co.uk> Cc: stable@vger.kernel.org Reported-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7f60e200e254cd53ad1bd74a56bdd23e813ac4b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 26 Sep 2016 08:30:46 +0000 (11:30 +0300)]
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.
What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.
This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.
SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.
v2: Just always enable the high speed clock to keep things simple (Daniel)
Beef up the commit message a bit (Daniel)
Imre Deak [Mon, 26 Sep 2016 14:54:31 +0000 (17:54 +0300)]
drm/i915/bxt: Fix HDMI DPLL configuration
a277ca7dc01d should've been a no-functional-change commit, but it
removed the initialization of the dpll_hw_state for HDMI outputs,
resulting in state mismatches and a failed modeset with blank
screen. Fix this by reinstating the dpll_hw_state initialization.
v2:
- Make bxt_ddi_hdmi_set_dpll_hw_state() static.
Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: a277ca7dc01d ("drm/i915: Split bxt_ddi_pll_select()") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474901671-22719-1-git-send-email-imre.deak@intel.com
(cherry picked from commit a04139c4cf289119cdfb6081af602f7a452fb7c2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Paulo Zanoni [Thu, 22 Sep 2016 21:00:33 +0000 (18:00 -0300)]
drm/i915/gen9: fix the watermark res_blocks value
We forgot the "res_blocks += y_tile_minimum" that's described on step
V of our documentation.
Again, this should only affect the Y tiling cases.
It looks like the relevant code was introduced in 0fda65680e92, but
there's always the possibility that it matched our specification when
it was introduced, and then the specification changed while the code
stayed the same. So we can't really say this was a regression, but
let's try to add a "Fixes" tag anyway to help backporting.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:32 +0000 (18:00 -0300)]
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
The confusing thing is that plane_blocks_per_line is listed as part of
the method 2 calculation but is also used for other things. We
calculated it in two different places and different ways: one inside
skl_wm_method2() and the other inside skl_compute_plane_wm(). The
skl_wm_method2() implementation is the one that matches the
specification.
With this patch we fix the skl_compute_plane_wm() calculation and just
pass it as a parameter to skl_wm_method2(). We also take care to not
modify the value of plane_bytes_per_line since we're going to rely on
it having a correct value in later patches.
This should affect the watermarks for Linear and Y-tiled.
From my analysis, it looks like the two plane_blocks_per_line
variables got out of sync on 0fda65680e92, but we can't really say
that commit was a regression, it looks like just an incomplete fix.
There's always the possibility that 0fda65680e92 matched our
specification at that time, and then later the specification changed.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:31 +0000 (18:00 -0300)]
drm/i915/gen9: minimum scanlines for Y tile is not always 4
During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.
This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:30 +0000 (18:00 -0300)]
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
Bspec says:
"The mailbox response data may not account for memory read latency.
If the mailbox response data for level 0 is 0us, add 2 microseconds
to the result for each valid level."
This means we should only do the +2 in case wm[0] == 0, not always.
So split the sanitizing implementation from the WA implementation and
fix the WA implementation.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:28 +0000 (18:00 -0300)]
drm/i915: introduce intel_has_sagv()
And use it to move knowledge about the SAGV-supporting platforms from
the callers to the SAGV code.
We'll add more platforms to intel_has_sagv(), so IMHO it makes more
sense to move all this to a single function instead of patching all
the callers every time we add SAGV support to a new platform.
v2: Move I915_SAGV_NOT_CONTROLLED to the new function (Lyude).
Paulo Zanoni [Thu, 22 Sep 2016 21:00:27 +0000 (18:00 -0300)]
drm/i915: SAGV is not SKL-only, so rename a few things
The plan is to introduce intel_has_sagv() and then use it to discover
which platforms actually support it.
I thought about keeping the functions with their current skl names,
but found two problems: (i) skl_has_sagv() would become a very
confusing name, and (ii) intel_atomic_commit_tail() doesn't seem to be
calling any functions whose name start with a platform name, so the
"intel_" naming scheme seems make more sense than the "firstplatorm_"
naming scheme here.
Paulo Zanoni [Fri, 19 Aug 2016 22:03:23 +0000 (19:03 -0300)]
drm/i915: don't forget to set intel_crtc->dspaddr_offset on SKL+
We never remembered to set it (so it was zero), but this was not a
problem in the past due to the way handled the hardware registers.
Unfortunately we changed how we set the hardware and forgot to set
intel_crtc->dspaddr_offset.
This started to reflect on a few kms_frontbuffer_tracking subtests
that relied on page flips with CRTCs that don't point to the x:0,y:0
coordinates of the frontbuffer. After the page flip the CRTC was
showing the x:0,y:0 coordinate of the frontbuffer instead of
x:500,y:500. This problem is present even if we don't enable FBC or
PSR.
While trying to bisect it I realized that the first bad commit
actually just gives me a black screen for the mentioned tests instead
of showing the wrong x:0,y:0 offsets. A few commits later the black
screen problem goes away and we get to the point where the code is
today, but I'll consider the black screen as the first bad commit
since it's the point where the IGT subtests start to fail.
Fixes: 6687c9062c46 ("drm/i915: Rewrite fb rotation GTT handling")
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-pgflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-evflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-shrfb-fliptrack Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471644203-23463-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 4c0b8a8bc49c477be9467f614b6b4ec479736019) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Wed, 21 Sep 2016 13:51:07 +0000 (14:51 +0100)]
drm/i915: Only shrink the unbound objects during freeze
At the point of creating the hibernation image, the runtime power manage
core is disabled - and using the rpm functions triggers a warn.
i915_gem_shrink_all() tries to unbind objects, which requires device
access and so tries to how an rpm reference triggering a warning:
Chris Wilson [Wed, 21 Sep 2016 13:51:06 +0000 (14:51 +0100)]
drm/i915: Restore current RPS state after reset
Following commit 821ed7df6e2a ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97824 Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-1-chris@chris-wilson.co.uk
(cherry picked from commit f2a91d1a6f5960c08f1ca60bd076f4dc020c50c6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Imre Deak [Wed, 14 Sep 2016 10:04:13 +0000 (13:04 +0300)]
drm/i915: Unlock PPS registers after GPU reset
Reapply the PPS register unlock workaround after GPU reset on platforms
where the reset clobbers the display HW state. This at least gets rid of
the related WARN during LVDS encoder enabling on PNV.
Shawn Lee [Mon, 19 Sep 2016 10:35:26 +0000 (13:35 +0300)]
drm/i915/backlight: setup backlight pwm alternate increment on backlight enable
Backlight enable is supposed to do a full setup of the backlight. We
were missing the PWM alternate increment bit in the south chicken
registers on lpt+ pch. This potentially caused a PWM frequency change
when the chicken register value was lost e.g. on suspend.
v2 by Jani, rebase on the patch caching alt increment
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97486
References: https://bugs.freedesktop.org/show_bug.cgi?id=67454 Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Wei Shun Chen <wei.shun.chang@intel.com> Cc: Gary C Wang <gary.c.wang@intel.com> Cc: stable@vger.kernel.org # v4.4+ 16e1203db8ab drm/i915/backlight: setup and cache... Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/8265f5935bd31c039ddfc82819d26c2ca1ae9cba.1474281249.git.jani.nikula@intel.com
(cherry picked from commit e29aff05f239f8dd24e9ee7816fd96726e20105a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Wed, 5 Oct 2016 17:40:56 +0000 (18:40 +0100)]
drm: Fix up kerneldoc for new drm_gem_dmabuf_export()
I hit send before completing a make htmldoc, and lo I forgot to fix up
the cut'n'paste.
Fixes: a4fce9cb782a ("drm/prime: Take a ref on the drm_dev when exporting...") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161005174056.29869-1-chris@chris-wilson.co.uk
Dave Airlie [Mon, 10 Oct 2016 06:40:16 +0000 (16:40 +1000)]
Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
Just some misc bug fixes for 4.9.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: revert "use more than 64KB fragment size if possible"
drm/amdgpu: warn if dp aux is still attached on free
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu: also track late init state
drm/amdgpu/virtual_dce: adjust config ifdef
drm/amdgpu/vce: add support for hw config packet (v2)
drm/amdgpu: clean up to set fw_offset as 0 twice
drm/amdgpu: remove DRM_AMD_POWERPLAY
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
drm/radeon: Slightly more robust flip completion handling for < DCE-4
Dave Airlie [Mon, 10 Oct 2016 06:36:16 +0000 (16:36 +1000)]
Merge tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel into drm-next
Another attempt, this time rebased and without the pipe crc patches:
- display_info cleanups from Ville
- make prime/gem lookups faster with rbtrees (Chris)
- misc stuff all over
* tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel:
drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it
drm/bridge: analogix_dp: Add analogix_dp_psr_supported
drm/fb-helper: add DRM_FB_HELPER_DEFAULT_OPS for fb_ops
drm: Document caveats around atomic event handling
uapi: add missing install of sync_file.h
drm: Simplify drm_printk to reduce object size quite a bit
drm/i915: Account for sink max TMDS clock when checking the port clock
drm/i915: Replace a bunch of connector->base.display_info with a local variable
drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()
drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID
drm/edid: Reduce the number of times we parse the CEA extension block
drm/edid: Don't pass around drm_display_info needlessly
drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info
drm/edid: Make max_tmds_clock kHz instead of MHz
drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID
drm/edid: Clear old audio latency values before parsing the new EDID
drm: Convert prime dma-buf <-> handle to rbtree
drm/mediatek: mark symbols static where possible
drm/rockchip: mark symbols static where possible
drm/rockchip: add missing header dependencies
Dave Airlie [Mon, 10 Oct 2016 06:32:58 +0000 (16:32 +1000)]
Merge tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux into drm-next
This pull request brings in several fixes for drm-next, mostly for
HDMI.
* tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux:
drm/vc4: Add support for double-clocked modes.
drm/vc4: Set up the AVI and SPD infoframes.
drm/vc4: Fix support for interlaced modes on HDMI.
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
drm/vc4: Enable limited range RGB output on HDMI with CEA modes.
drm/vc4: Fix races when the CS reads from render targets.
drm/vc4: cleanup with list_first_entry_or_null()
Maxime Ripard [Fri, 30 Sep 2016 14:37:06 +0000 (16:37 +0200)]
drm/bridge: Add RGB to VGA bridge support
Some boards have an entirely passive RGB to VGA bridge, based on DACs
implemented by resistor ladders.
Those might or might not have an i2c bus routed to the VGA connector in
order to access the screen EDIDs.
Add a bridge that doesn't do anything but expose the modes available on the
screen, either based on the EDIDs if available, or based on the XGA
standards.
Eric Anholt [Thu, 29 Sep 2016 22:34:44 +0000 (15:34 -0700)]
drm/vc4: Add support for double-clocked modes.
Now that we have infoframes to report the pixel repeat flag, we can
start using it. Fixes locking the 720x480i and 720x576i modes on my
Dell 2408WFP. Like the 1920x1080i case, they don't fit properly on
the screen, though.
Eric Anholt [Thu, 29 Sep 2016 00:30:25 +0000 (17:30 -0700)]
drm/vc4: Fix support for interlaced modes on HDMI.
We really do need to be using the halved V fields. I had been
confused by the code I was using as a reference because it stored
halved vsync fields but not halved vdisplay, so it looked like I only
needed to divide vdisplay by 2.
This reverts part of Mario's timestamping fixes that prevented
CRTC_HALVE_V from applying, and instead adjusts the timestamping code
to not use the crtc field in that case.
Fixes locking of 1920x1080x60i on my Dell 2408WFP. There are black
bars on the top and bottom, but I suspect that might be an
under/overscan flags problem as opposed to video timings.
Eric Anholt [Thu, 29 Sep 2016 00:21:05 +0000 (17:21 -0700)]
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
Fixes occasional debug spew at boot when connected directly through
HDMI, and probably confusing the HDMI state machine when we go trying
to poke registers for the enable sequence too soon.
Eric Anholt [Wed, 14 Sep 2016 18:21:29 +0000 (19:21 +0100)]
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything. However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).
As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection. Fixes HDMI display on the pi3.
Eric Anholt [Tue, 27 Sep 2016 16:03:13 +0000 (09:03 -0700)]
drm/vc4: Fix races when the CS reads from render targets.
With the introduction of bin/render pipelining, the previous job may
not be completed when we start binning the next one. If the previous
job wrote our VBO, IB, or CS textures, then the binning stage might
get stale or uninitialized results.
Fixes the major rendering failure in glmark2 -b terrain.
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Cc: stable@vger.kernel.org
The block size is indeed an equal match, so this can cause performance regressions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/amdgpu: warn if dp aux is still attached on free
If this happens (and it recently did), we free a structure while part of
it is still in use, which results in non-obvious crashes. The way it's
detached is not trivial (DRM core has to call the connector .destroy
callback and things must be torn down in the right order), so better
detect it and warn early.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Successful sw_init() and hw_init() states are tracked, but not
late_init(). Various error paths may result in amdgpu_fini() being
called before .late init is done, so late_init needs to be tracked
to avoid unexpected or multiple .late_fini() calls.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Wed, 5 Oct 2016 12:21:44 +0000 (13:21 +0100)]
drm/prime: Take a ref on the drm_dev when exporting a dma_buf
dma_buf may live a long time, longer than the last direct user of the
driver. We already hold a reference to the owner module (that prevents
the object code from disappearing), but there is no reference to the
drm_dev - so the pointers to the driver backend themselves may vanish.
v2: Resist temptation to fix the bug in armada_gem.c not setting the
correct flags on the exported dma-buf (it should pass the flags through
and not be arbitrarily setting O_RDWR).
Use a common wrapper for exporting the dmabuf and acquiring the
reference to the drm_device.
Testcase: igt/vgem_basic/unload Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Tested-by: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 5 Oct 2016 12:21:43 +0000 (13:21 +0100)]
drm/prime: Pass the right module owner through to dma_buf_export()
dma_buf_export() adds a reference to the owning module to the dmabuf (to
prevent the driver from being unloaded whilst a third party still refers
to the dmabuf). However, drm_gem_prime_export() was passing its own
THIS_MODULE (i.e. drm.ko) rather than the driver. Extract the right
owner from the device->fops instead.
v2: Use C99 initializers to zero out unset elements of
dma_buf_export_info
v3: Extract the right module from dev->fops.
Testcase: igt/vgem_basic/unload Reported-by: Petri Latvala <petri.latvala@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Tested-by: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-1-chris@chris-wilson.co.uk
Alex Deucher [Wed, 28 Sep 2016 20:37:15 +0000 (16:37 -0400)]
drm/amdgpu: remove DRM_AMD_POWERPLAY
Powerplay is no longer optional after the recently cleanups
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Sat, 17 Sep 2016 12:25:39 +0000 (14:25 +0200)]
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
Pre DCE4 hw doesn't have reliable pageflip completion
interrupts, so instead polling for flip completion is
used from within the vblank irq handler to complete
page flips.
This causes a race if pageflip ioctl is called close to
vblank:
1. pageflip ioctl queues execution of radeon_flip_work_func.
3. radeon_flip_work_func runs inside vblank, decides to
set flip_status == FLIP_SUBMITTED and programs the
flip into hw.
4. hw executes flip immediately (because in vblank), but
as 2 already happened, the flip completion routine only
emits the flip completion event one refresh later ->
wrong vblank count/timestamp for completion and no
performance gain, as instead of delaying the flip until
next vblank, we now delay the next flip by 1 refresh
while waiting for the delayed flip completion event.
Given we often don't gain anything due to this race, but
lose precision, prevent the programmed flip from executing
in vblank on pre DCE4 asics to avoid this race.
On pre-AVIVO hw we can't program the hw for edge-triggered
flips, they always execute anywhere in vblank. Therefore delay
the actual flip programming until after vblank on pre-AVIVO.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Sat, 17 Sep 2016 12:25:38 +0000 (14:25 +0200)]
drm/radeon: Slightly more robust flip completion handling for < DCE-4
Pre DCE4 hardware doesn't have (reliable) pageflip completion
irqs, therefore we have to use the old polling method for flip
completion handling in vblank irq.
As vblank irqs fire a bit before start of vblank (when the
linebuffer fifo read position reaches end of scanout), we
have some fudge for flip completion handling in the last
lines of active scanout. Old code assumed the threshold to
be 99% of active scanout height, a ballpark estimate which
worked ok. Since we know since a while how to calculate the
actual threshold from linebuffer size, lets make use of it
to get a more accurate threshold.
This completion path is still prone to some races in corner
cases, especially on pre-AVIVO hardware, so document them
a bit better in the code comments.
Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it
There's no point in enabling PSR when the panel doesn't support it.
This also avoids a problem when PSR gets enabled when a CRTC is being
disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR
interrupt on which we wait will never arrive. This was observed on
RK3288 with a panel without PSR (veyron-jaq Chromebook).
It's very easy to reproduce by running the kms_rmfb test in IGT a few
times.
Daniel Vetter [Fri, 30 Sep 2016 10:04:56 +0000 (12:04 +0200)]
drm: Document caveats around atomic event handling
It's not that obvious how a driver can all race the atomic commit with
handling the completion event. And there's unfortunately a pile of
drivers with rather bad event handling which misdirect people into the
wrong direction.
Try to remedy this by documenting everything better.
As part of the sync framework destaging, the sync_file.h header
was moved, but an entry was not added on Kbuild to install it.
This patch resolves this omission so that "make headers_install"
installs this header.
Fixes: 460bfc41fd52 ("dma-buf/sync_file: de-stage sync_file headers") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160927143142.8975-1-emilio.lopez@collabora.co.uk
Ville Syrjälä [Wed, 28 Sep 2016 13:51:43 +0000 (16:51 +0300)]
drm/i915: Account for sink max TMDS clock when checking the port clock
It's perfectly legal for the sink to support 12bpc only for
some lower resolution modes, while the higher resolution modes
can only be used with 8bpc. So let's take the sink's max TMDS clock
into account before we go and decide that a particular mode can
be used with 12bpc.
Ville Syrjälä [Wed, 28 Sep 2016 13:51:41 +0000 (16:51 +0300)]
drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()
drm_edid_to_eld() is just mean to cook up the ELD for the audio driver,
so having it parse non-audio related stuff seems just wrong, and
potentially could lead to that information not being even filled out
if the function doesn't even get called. Let's move that stuff to the
place where we parse the color formats and whatnot from the CEA ext
block.
Ville Syrjälä [Wed, 28 Sep 2016 13:51:40 +0000 (16:51 +0300)]
drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID
It's not a good idea to leave stale cea_rev in the drm_display_info. The
current EDID might not even have a CEA ext block in which case we'd end
up leaving the stale value in place.
Ville Syrjälä [Wed, 28 Sep 2016 13:51:39 +0000 (16:51 +0300)]
drm/edid: Reduce the number of times we parse the CEA extension block
Instead of parsing parts of the CEA extension block in two places
to determine supported color formats and whatnot, let's just
consolidate it to one function. This also makes it possible to neatly
flatten drm_assign_hdmi_deep_color_info().
Ville Syrjälä [Wed, 28 Sep 2016 13:51:38 +0000 (16:51 +0300)]
drm/edid: Don't pass around drm_display_info needlessly
We already pass the connector to drm_add_display_info() and
drm_assign_hdmi_deep_color_info(), so passing the
connector->display_info also is pointless.
projects / mirror_ubuntu-hirsute-kernel.git / log