Linus Torvalds [Sat, 26 Nov 2022 01:50:57 +0000 (17:50 -0800)]
Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- A few fixes for s390 sads (Stefan, Colin)
- Ensure that ublk doesn't reorder requests, as that can be problematic
on devices that need specific ordering (Ming)
- Fix a queue reference leak in disk allocation handling (Christoph)
* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
ublk_drv: don't forward io commands in reserve order
s390/dasd: fix possible buffer overflow in copy_pair_show
s390/dasd: fix no record found for raw_track_access
s390/dasd: increase printing of debug data payload
s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
Linus Torvalds [Sat, 26 Nov 2022 01:46:04 +0000 (17:46 -0800)]
Merge tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- A few poll related fixes. One fixing a race condition between poll
cancelation and trigger, and one making the overflow handling a bit
more robust (Lin, Pavel)
- Fix an fput() for error handling in the direct file table (Lin)
- Fix for a regression introduced in this cycle, where we don't always
get TIF_NOTIFY_SIGNAL cleared appropriately (me)
* tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux:
io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
io_uring/poll: fix poll_refs race with cancelation
io_uring/filetable: fix file reference underflow
io_uring: make poll refs more robust
io_uring: cmpxchg for poll arm refs release
Linus Torvalds [Sat, 26 Nov 2022 00:34:39 +0000 (16:34 -0800)]
Merge tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix a race between zonefs module initialization of sysfs attribute
directory and mounting a drive (from Xiaoxu).
- Fix active zone accounting in the rare case of an IO error due to a
zone transition to offline or read-only state (from me).
* tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix active zone accounting
zonefs: Fix race between modprobe and mount
Linus Torvalds [Fri, 25 Nov 2022 21:54:48 +0000 (13:54 -0800)]
Merge tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"This is more changes than I'd like this late although the diffstat is
still fairly small, I kept on holding off as new fixes came in to give
things time to soak in -next but should probably have tagged and sent
an additional pull request earlier.
There's some relatively large fixes to the twl6030 driver to fix
issues with the TWL6032 variant which resulted from some work on the
core TWL6030 driver, a couple of fixes for error handling paths
(mostly in the core), and a nice stability fix for the sgl51000 driver
that's been pulled out of a BSP"
* tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: twl6030: fix get status of twl6032 regulators
regulator: twl6030: re-add TWL6032_SUBCLASS
regulator: slg51000: Wait after asserting CS pin
regulator: core: fix UAF in destroy_regulator()
regulator: rt5759: fix OOB in validate_desc()
regulator: core: fix kobject release warning and memory leak in regulator_register()
Linus Torvalds [Fri, 25 Nov 2022 21:24:05 +0000 (13:24 -0800)]
Merge tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix a regression in nowait + buffered write
- in zoned mode fix endianness when comparing super block generation
- locking and lockdep fixes:
- fix potential sleeping under spinlock when setting qgroup limit
- lockdep warning fixes when btrfs_path is freed after copy_to_user
- do not modify log tree while holding a leaf from fs tree locked
- fix freeing of sysfs files of static features on error
- use kv.alloc for zone map allocation as a fallback to avoid warnings
due to high order allocation
- send, avoid unaligned encoded writes when attempting to clone range
* tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
btrfs: do not modify log tree while holding a leaf from fs tree locked
btrfs: use kvcalloc in btrfs_get_dev_zone_info
btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()
btrfs: send: avoid unaligned encoded writes when attempting to clone range
btrfs: zoned: fix missing endianness conversion in sb_write_pointer
btrfs: free btrfs_path before copying subvol info to userspace
btrfs: free btrfs_path before copying fspath to userspace
btrfs: free btrfs_path before copying inodes to userspace
btrfs: free btrfs_path before copying root refs to userspace
btrfs: fix assertion failure and blocking during nowait buffered write
Linus Torvalds [Fri, 25 Nov 2022 20:43:33 +0000 (12:43 -0800)]
Merge tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
had not been expected to make any functional difference, but turned
out to introduce a performance regression, fix an initialization issue
in the amd-pstate driver and make it actually replace the venerable
ACPI cpufreq driver on the supported systems by default.
Specifics:
- Revert a recent schedutil cpufreq governor change that introduced a
performace regression on Pixel 6 (Sam Wu)
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny)
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan)
- Update amd-pstate documentation in accordance with the other
changes made to it (Perry Yuan)"
* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: add amd-pstate kernel command line options
Documentation: amd-pstate: add driver working mode introduction
cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
cpufreq: amd-pstate: change amd-pstate driver to be built-in type
cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"
Linus Torvalds [Fri, 25 Nov 2022 20:37:24 +0000 (12:37 -0800)]
Merge tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix size of incorrectly increased from four to eight bytes TOD field
of crash dump save area. As result in case of kdump NT_S390_TODPREG
ELF notes section contains correct value and "detected read beyond
size of field" compiler warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP) module on
initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
Gordeev <agordeev@linux.ibm.com> as S390 memory management
maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
a bit more precise.
* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add S390 MM section
s390/crashdump: fix TOD programmable field size
s390/ap: fix memory leak in ap_init_qci_info()
Linus Torvalds [Fri, 25 Nov 2022 20:32:42 +0000 (12:32 -0800)]
Merge tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix IRTE allocation in Hyper-V PCI controller (Dexuan Cui)
- Fix handling of SCSI srb_status and capacity change events (Michael
Kelley)
- Restore VP assist page after CPU offlining and onlining (Vitaly
Kuznetsov)
- Fix some memory leak issues in VMBus (Yang Yingliang)
* tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
scsi: storvsc: Fix handling of srb_status and capacity change events
x86/hyperv: Restore VP assist page after cpu offlining/onlining
Linus Torvalds [Fri, 25 Nov 2022 18:18:25 +0000 (10:18 -0800)]
Merge tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
Linus Torvalds [Fri, 25 Nov 2022 18:12:43 +0000 (10:12 -0800)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes, one of them for this cycle regression..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: vfs_tmpfile: ensure O_EXCL flag is enforced
fs: use acquire ordering in __fget_light()
Jens Axboe [Fri, 25 Nov 2022 16:36:29 +0000 (09:36 -0700)]
io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.
Cc: stable@vger.kernel.org Fixes: 46a525e199e4 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 25 Nov 2022 17:26:18 +0000 (09:26 -0800)]
Merge tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few more last-minute fixes for 6.1 that have been gathered in the
last week; nothing looks too worrisome, mostly device-specific small
fixes, including the ABI fix for ASoC SOF"
* tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: soc-pcm: Add NULL check in BE reparenting
ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
ASoC: SOF: dai: move AMD_HS to end of list to restore backwards-compatibility
ASoC: max98373: Add checks for devm_kcalloc
ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions
ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open()
ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove
ASoC: hdac_hda: fix hda pcm buffer overflow issue
ASoC: stm32: i2s: remove irqf_oneshot flag
ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register
Linus Torvalds [Fri, 25 Nov 2022 17:20:42 +0000 (09:20 -0800)]
Merge tag 'drm-fixes-2022-11-25' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu has not quite settled down.
Most of the changes are small, and the non-amdgpu ones are all fine.
There are a bunch of DP MST DSC fixes that fix some issues introduced
in a previous larger MST rework.
The biggest one is mainly propagating some error values properly
instead of bool returns, and I think it just looks large but doesn't
really change anything too much, except propagating errors that are
required to avoid deadlocks. I've gone over it and a few others and
they've had some decent testing over the last few weeks.
i915:
- Fix GVT KVM reference count handling
- Never purge busy TTM objects
- Fix warn in intel_display_power_*_domain() functions
dma-buf:
- Use dma_fence_unwrap_for_each when importing sync files
- Fix race in dma_heap_add()
fbcon:
- Fix use of uninitialized memory in logo"
* tag 'drm-fixes-2022-11-25' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu/vcn: re-use original vcn0 doorbell value
drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read"
drm/amd/display: No display after resume from WB/CB
drm/amdgpu: fix use-after-free during gpu recovery
drm/amd/pm: update driver if header for smu_13_0_7
drm/amd/display: Fix rotated cursor offset calculation
drm/amd/display: Use new num clk levels struct for max mclk index
drm/amd/display: Avoid setting pixel rate divider to N/A
drm/amd/display: Use viewport height for subvp mall allocation size
drm/amd/display: Update soc bounding box for dcn32/dcn321
drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASAN
drm/amdgpu/psp: don't free PSP buffers on suspend
fbcon: Use kzalloc() in fbcon_prepare_logo()
dma-buf: fix racing conflict of dma_heap_add()
drm/amd/amdgpu: reserve vm invalidation engine for firmware
drm/amdgpu: Enable Aldebaran devices to report CU Occupancy
drm/amdgpu: fix userptr HMM range handling v2
drm/amdgpu: always register an MMU notifier for userptr
drm/amdgpu/dm/mst: Fix uninitialized var in pre_compute_mst_dsc_configs_for_state()
drm/amdgpu/dm/dp_mst: Don't grab mst_mgr->lock when computing DSC state
...
The root cause for this is a tiny overlooking in
io_poll_check_events() when cocurrently run with poll cancel routine
io_poll_cancel_req().
The interleaving to trigger use-after-free:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
v = atomic_read(...) |
// poll_refs not change |
|
if (v & IO_POLL_CANCEL_FLAG) |
return -ECANCELED; |
// io_poll_check_events return |
// will go into |
// io_req_complete_failed() free req |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
And the interleaving to trigger the kernel WARNING:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
v = atomic_read(...) |
// v = IO_POLL_CANCEL_FLAG |
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
|
WARN_ON_ONCE(!(v & IO_POLL_REF_MASK))) |
// v & IO_POLL_REF_MASK = 0 WARN |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
By looking up the source code and communicating with Pavel, the
implementation of this atomic poll refs should continue the loop of
io_poll_check_events() just to avoid somewhere else to grab the
ownership. Therefore, this patch simply adds another AND operation to
make sure the loop will stop if it finds the poll_refs is exactly equal
to IO_POLL_CANCEL_FLAG. Since io_poll_cancel_req() grabs ownership and
will finally make its way to io_req_complete_failed(), the req will
be reclaimed as expected.
Fixes: aa43477b0402 ("io_uring: poll rework") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: tweak description and code style] Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lin Ma [Tue, 22 Nov 2022 18:40:15 +0000 (02:40 +0800)]
io_uring/filetable: fix file reference underflow
There is an interesting reference bug when -ENOMEM occurs in calling of
io_install_fixed_file(). KASan report like below:
[ 14.057131] ==================================================================
[ 14.059161] BUG: KASAN: use-after-free in unix_get_socket+0x10/0x90
[ 14.060975] Read of size 8 at addr ffff88800b09cf20 by task kworker/u8:2/45
[ 14.062684]
[ 14.062768] CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted 6.1.0-rc4 #1
[ 14.063099] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.063666] Workqueue: events_unbound io_ring_exit_work
[ 14.063936] Call Trace:
[ 14.064065] <TASK>
[ 14.064175] dump_stack_lvl+0x34/0x48
[ 14.064360] print_report+0x172/0x475
[ 14.064547] ? _raw_spin_lock_irq+0x83/0xe0
[ 14.064758] ? __virt_addr_valid+0xef/0x170
[ 14.064975] ? unix_get_socket+0x10/0x90
[ 14.065167] kasan_report+0xad/0x130
[ 14.065353] ? unix_get_socket+0x10/0x90
[ 14.065553] unix_get_socket+0x10/0x90
[ 14.065744] __io_sqe_files_unregister+0x87/0x1e0
[ 14.065989] ? io_rsrc_refs_drop+0x1c/0xd0
[ 14.066199] io_ring_exit_work+0x388/0x6a5
[ 14.066410] ? io_uring_try_cancel_requests+0x5bf/0x5bf
[ 14.066674] ? try_to_wake_up+0xdb/0x910
[ 14.066873] ? virt_to_head_page+0xbe/0xbe
[ 14.067080] ? __schedule+0x574/0xd20
[ 14.067273] ? read_word_at_a_time+0xe/0x20
[ 14.067492] ? strscpy+0xb5/0x190
[ 14.067665] process_one_work+0x423/0x710
[ 14.067879] worker_thread+0x2a2/0x6f0
[ 14.068073] ? process_one_work+0x710/0x710
[ 14.068284] kthread+0x163/0x1a0
[ 14.068454] ? kthread_complete_and_exit+0x20/0x20
[ 14.068697] ret_from_fork+0x22/0x30
[ 14.068886] </TASK>
[ 14.069000]
[ 14.069088] Allocated by task 289:
[ 14.069269] kasan_save_stack+0x1e/0x40
[ 14.069463] kasan_set_track+0x21/0x30
[ 14.069652] __kasan_slab_alloc+0x58/0x70
[ 14.069899] kmem_cache_alloc+0xc5/0x200
[ 14.070100] __alloc_file+0x20/0x160
[ 14.070283] alloc_empty_file+0x3b/0xc0
[ 14.070479] path_openat+0xc3/0x1770
[ 14.070689] do_filp_open+0x150/0x270
[ 14.070888] do_sys_openat2+0x113/0x270
[ 14.071081] __x64_sys_openat+0xc8/0x140
[ 14.071283] do_syscall_64+0x3b/0x90
[ 14.071466] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.071791]
[ 14.071874] Freed by task 0:
[ 14.072027] kasan_save_stack+0x1e/0x40
[ 14.072224] kasan_set_track+0x21/0x30
[ 14.072415] kasan_save_free_info+0x2a/0x50
[ 14.072627] __kasan_slab_free+0x106/0x190
[ 14.072858] kmem_cache_free+0x98/0x340
[ 14.073075] rcu_core+0x427/0xe50
[ 14.073249] __do_softirq+0x110/0x3cd
[ 14.073440]
[ 14.073523] Last potentially related work creation:
[ 14.073801] kasan_save_stack+0x1e/0x40
[ 14.074017] __kasan_record_aux_stack+0x97/0xb0
[ 14.074264] call_rcu+0x41/0x550
[ 14.074436] task_work_run+0xf4/0x170
[ 14.074619] exit_to_user_mode_prepare+0x113/0x120
[ 14.074858] syscall_exit_to_user_mode+0x1d/0x40
[ 14.075092] do_syscall_64+0x48/0x90
[ 14.075272] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.075529]
[ 14.075612] Second to last potentially related work creation:
[ 14.075900] kasan_save_stack+0x1e/0x40
[ 14.076098] __kasan_record_aux_stack+0x97/0xb0
[ 14.076325] task_work_add+0x72/0x1b0
[ 14.076512] fput+0x65/0xc0
[ 14.076657] filp_close+0x8e/0xa0
[ 14.076825] __x64_sys_close+0x15/0x50
[ 14.077019] do_syscall_64+0x3b/0x90
[ 14.077199] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.077448]
[ 14.077530] The buggy address belongs to the object at ffff88800b09cf00
[ 14.077530] which belongs to the cache filp of size 232
[ 14.078105] The buggy address is located 32 bytes inside of
[ 14.078105] 232-byte region [ffff88800b09cf00, ffff88800b09cfe8)
[ 14.078685]
[ 14.078771] The buggy address belongs to the physical page:
[ 14.079046] page:000000001bd520e7 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800b09de00 pfn:0xb09c
[ 14.079575] head:000000001bd520e7 order:1 compound_mapcount:0 compound_pincount:0
[ 14.079946] flags: 0x100000000010200(slab|head|node=0|zone=1)
[ 14.080244] raw: 01000000000102000000000000000000dead000000000001ffff88800493cc80
[ 14.080629] raw: ffff88800b09de00000000008019001800000001ffffffff0000000000000000
[ 14.081016] page dumped because: kasan: bad access detected
[ 14.081293]
[ 14.081376] Memory state around the buggy address:
[ 14.081618] ffff88800b09ce00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 14.081974] ffff88800b09ce80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 14.082336] >ffff88800b09cf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 14.082690] ^
[ 14.082909] ffff88800b09cf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[ 14.083266] ffff88800b09d000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[ 14.083622] ==================================================================
The actual tracing of this bug is shown below:
commit 8c71fe750215 ("io_uring: ensure fput() called correspondingly
when direct install fails") adds an additional fput() in
io_fixed_fd_install() when io_file_bitmap_get() returns error values. In
that case, the routine will never make it to io_install_fixed_file() due
to an early return.
static int io_fixed_fd_install(...)
{
if (alloc_slot) {
...
ret = io_file_bitmap_get(ctx);
if (unlikely(ret < 0)) {
io_ring_submit_unlock(ctx, issue_flags);
fput(file);
return ret;
}
...
}
...
ret = io_install_fixed_file(req, file, issue_flags, file_slot);
...
}
In the above scenario, the reference is okay as io_fixed_fd_install()
ensures the fput() is called when something bad happens, either via
bitmap or via inner io_install_fixed_file().
However, the commit 61c1b44a21d7 ("io_uring: fix deadlock on iowq file
slot alloc") breaks the balance because it places fput() into the common
path for both io_file_bitmap_get() and io_install_fixed_file(). Since
io_install_fixed_file() handles the fput() itself, the reference
underflow come across then.
There are some extra commits make the current code into
io_fixed_fd_install() -> __io_fixed_fd_install() ->
io_install_fixed_file()
However, the fact that there is an extra fput() is called if
io_install_fixed_file() calls fput(). Traversing through the code, I
find that the existing two callers to __io_fixed_fd_install():
io_fixed_fd_install() and io_msg_send_fd() have fput() when handling
error return, this patch simply removes the fput() in
io_install_fixed_file() to fix the bug.
Pavel Begunkov [Sun, 20 Nov 2022 16:57:42 +0000 (16:57 +0000)]
io_uring: make poll refs more robust
poll_refs carry two functions, the first is ownership over the request.
The second is notifying the io_poll_check_events() that there was an
event but wake up couldn't grab the ownership, so io_poll_check_events()
should retry.
We want to make poll_refs more robust against overflows. Instead of
always incrementing it, which covers two purposes with one atomic, check
if poll_refs is elevated enough and if so set a retry flag without
attempts to grab ownership. The gap between the bias check and following
atomics may seem racy, but we don't need it to be strict. Moreover there
might only be maximum 4 parallel updates: by the first and the second
poll entries, __io_arm_poll_handler() and cancellation. From those four,
only poll wake ups may be executed multiple times, but they're protected
by a spin.
Pavel Begunkov [Sun, 20 Nov 2022 16:57:41 +0000 (16:57 +0000)]
io_uring: cmpxchg for poll arm refs release
Replace atomically substracting the ownership reference at the end of
arming a poll with a cmpxchg. We try to release ownership by setting 0
assuming that poll_refs didn't change while we were arming. If it did
change, we keep the ownership and use it to queue a tw, which is fully
capable to process all events and (even tolerates spurious wake ups).
It's a bit more elegant as we reduce races b/w setting the cancellation
flag and getting refs with this release, and with that we don't have to
worry about any kinds of underflows. It's not the fastest path for
polling. The performance difference b/w cmpxchg and atomic dec is
usually negligible and it's not the fastest path.
Damien Le Moal [Mon, 21 Nov 2022 07:29:37 +0000 (16:29 +0900)]
zonefs: Fix active zone accounting
If a file zone transitions to the offline or readonly state from an
active state, we must clear the zone active flag and decrement the
active seq file counter. Do so in zonefs_account_active() using the new
zonefs inode flags ZONEFS_ZONE_OFFLINE and ZONEFS_ZONE_READONLY. These
flags are set if necessary in zonefs_check_zone_condition() based on the
result of report zones operation after an IO error.
Fixes: 87c9ce3ffec9 ("zonefs: Add active seq file accounting") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Dave Airlie [Thu, 24 Nov 2022 23:21:10 +0000 (09:21 +1000)]
Merge tag 'drm-misc-fixes-2022-11-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc7:
- Another amdgpu gang submit fix.
- Use dma_fence_unwrap_for_each when importing sync files.
- Fix race in dma_heap_add().
- Fix use of uninitialized memory in logo.
Linus Torvalds [Thu, 24 Nov 2022 19:14:09 +0000 (11:14 -0800)]
Merge tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a bunch of late fixes that just came in, in particular a
longer series for Rockchips devicetree files, but most of those just
address cosmetic errors that were found during the binding validation.
There are a couple of code changes:
- A regression fix to the IXP42x PCI bus
- A fix for a memory leak on optee, and another one for mach-mxs
- Two fixes for the sunxi rsb bus driver, to address problems with
the shutdown logic
The rest are small but important devicetree fixes for a number of
individual boards, addressing issues across all platforms:
- arm global timer on older rockchip SoCs is unstable and needs to be
disabled in favor of a more reliable clocksource
- Corrections to fix bluetooth, mmc, and networking on a few Rockchip
boards
- at91/sam9g20ek UDC needs a pin controller config change
- an omap board runs into mmc probe errors because of regulator nodes
in the wrong place
- imx8mp-evk has a minor inaccuracy with its pin config, but without
user visible impact
- The Allwinner H6 Hantro G2 video decoder needs an IOMMU reference
to prevent the driver from crashing"
* tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
bus: ixp4xx: Don't touch bit 7 on IXP42x
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
tee: optee: fix possible memory leak in optee_register_device()
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
...
Linus Torvalds [Thu, 24 Nov 2022 19:09:01 +0000 (11:09 -0800)]
Merge tag 'loongarch-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix two build warnings, a copy_thread() bug, two page table
manipulation bugs, and some trivial cleanups"
* tag 'loongarch-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Fix wrong description of FPRs Note
LoongArch: Fix unsigned comparison with less than zero
LoongArch: Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite()
LoongArch: Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()
LoongArch: Clear FPU/SIMD thread info flags for kernel thread
LoongArch: SMP: Change prefix from loongson3 to loongson
LoongArch: Combine acpi_boot_table_init() and acpi_boot_init()
LoongArch: Makefile: Use "grep -E" instead of "egrep"
Linus Torvalds [Thu, 24 Nov 2022 18:22:42 +0000 (10:22 -0800)]
Merge tag 'ext4_for_linus_stable2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression in the lazytime code that was introduced in v6.1-rc1,
and a use-after-free that can be triggered by a maliciously corrupted
file system"
* tag 'ext4_for_linus_stable2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: do not update freeing inode i_io_list
ext4: fix use-after-free in ext4_ext_shift_extents
Arnd Bergmann [Thu, 24 Nov 2022 14:36:13 +0000 (15:36 +0100)]
Merge tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Disabling of the unreliable arm-global-timer on earliest
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
* tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
Heiko Carstens [Thu, 17 Nov 2022 19:23:30 +0000 (20:23 +0100)]
MAINTAINERS: add S390 MM section
Alexander Gordeev and Gerald Schaefer are covering the whole s390 specific
memory management code. Reflect that by adding a new S390 MM section to
MAINTAINERS.
Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise.
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Heiko Carstens [Fri, 18 Nov 2022 12:05:39 +0000 (13:05 +0100)]
s390/crashdump: fix TOD programmable field size
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840acf9 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 1a2c5840acf9 ("s390/dump: cleanup CPU save area handling") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Yu Liao [Wed, 23 Nov 2022 08:22:36 +0000 (16:22 +0800)]
net: thunderx: Fix the ACPI memory leak
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Xiongfeng Wang [Wed, 23 Nov 2022 06:59:19 +0000 (14:59 +0800)]
octeontx2-af: Fix reference count issue in rvu_sdp_init()
pci_get_device() will decrease the reference count for the *from*
parameter. So we don't need to call put_device() to decrease the
reference. Let's remove the put_device() in the loop and only decrease
the reference count of the returned 'pdev' for the last loop because it
will not be passed to pci_get_device() as input parameter. We don't need
to check if 'pdev' is NULL because it is already checked inside
pci_dev_put(). Also add pci_dev_put() for the error path.
Li Zetao [Tue, 22 Nov 2022 15:00:46 +0000 (23:00 +0800)]
virtio_net: Fix probe failed when modprobe virtio_net
When doing the following test steps, an error was found:
step 1: modprobe virtio_net succeeded
# modprobe virtio_net <-- OK
step 2: fault injection in register_netdevice()
# modprobe -r virtio_net <-- OK
# ...
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 3521 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
...
should_failslab+0xa/0x20
...
dev_set_name+0xc0/0x100
netdev_register_kobject+0xc2/0x340
register_netdevice+0xbb9/0x1320
virtnet_probe+0x1d72/0x2658 [virtio_net]
...
</TASK>
virtio_net: probe of virtio0 failed with error -22
step 3: modprobe virtio_net failed
# modprobe virtio_net <-- failed
virtio_net: probe of virtio0 failed with error -2
The root cause of the problem is that the queues are not
disable on the error handling path when register_netdevice()
fails in virtnet_probe(), resulting in an error "-ENOENT"
returned in the next modprobe call in setup_vq().
virtio_pci_modern_device uses virtqueues to send or
receive message, and "queue_enable" records whether the
queues are available. In vp_modern_find_vqs(), all queues
will be selected and activated, but once queues are enabled
there is no way to go back except reset.
Fix it by reset virtio device on error handling path. This
makes error handling follow the same order as normal device
cleanup in virtnet_remove() which does: unregister, destroy
failover, then reset. And that flow is better tested than
error handling so we can be reasonably sure it works well.
Fixes: 024655555021 ("virtio_net: fix use after free on allocation failure") Signed-off-by: Li Zetao <lizetao1@huawei.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20221122150046.3910638-1-lizetao1@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Tue, 22 Nov 2022 13:09:36 +0000 (15:09 +0200)]
net: enetc: preserve TX ring priority across reconfiguration
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3a2 ("enetc: Add dynamic allocation of extended Rx BD rings") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
nfc: st-nci: Restructure validating logic in EVT_TRANSACTION
These are the same 3 patches that were applied in st21nfca here:
https://lore.kernel.org/netdev/20220607025729.1673212-1-mfaltesek@google.com
with a couple minor differences.
st-nci has nearly identical code to that of st21nfca for EVT_TRANSACTION,
except that there are two extra validation checks that are not present
in the st-nci code.
The 3/3 patch as coded for st21nfca pulls those checks in, bringing both
drivers into parity.
====================
Martin Faltesek [Tue, 22 Nov 2022 00:42:46 +0000 (18:42 -0600)]
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seems intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.
To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as validation checks are
moved ahead of memory allocation.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com> Reviewed-by: Guenter Roeck <groeck@google.com> Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support") Signed-off-by: Martin Faltesek <mfaltesek@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Faltesek [Tue, 22 Nov 2022 00:42:44 +0000 (18:42 -0600)]
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com> Reviewed-by: Guenter Roeck <groeck@google.com> Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support") Signed-off-by: Martin Faltesek <mfaltesek@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ming Lei [Mon, 21 Nov 2022 15:56:45 +0000 (23:56 +0800)]
ublk_drv: don't forward io commands in reserve order
Either ublk_can_use_task_work() is true or not, io commands are
forwarded to ublk server in reverse order, since llist_add() is
always to add one element to the head of the list.
Even though block layer doesn't guarantee request dispatch order,
requests should be sent to hardware in the sequence order generated
from io scheduler, which usually considers the request's LBA, and
order is often important for HDD.
So forward io commands in the sequence made from io scheduler by
aligning task work with current io_uring command's batch handling,
and it has been observed that both can get similar performance data
if IORING_SETUP_COOP_TASKRUN is set from ublk server.
Reported-by: Andreas Hindborg <andreas.hindborg@wdc.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221121155645.396272-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jakub Kicinski [Thu, 24 Nov 2022 03:18:58 +0000 (19:18 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2022-11-23
1) Fix "disable_policy" on ipv4 early demuxP Packets after
the initial packet in a flow might be incorectly dropped
on early demux if there are no matching policies.
From Eyal Birger.
2) Fix a kernel warning in case XFRM encap type is not
available. From Eyal Birger.
3) Fix ESN wrap around for GSO to avoid a double usage of a
sequence number. From Christian Langrock.
4) Fix a send_acquire race with pfkey_register.
From Herbert Xu.
5) Fix a list corruption panic in __xfrm_state_delete().
Thomas Jarosch.
6) Fix an unchecked return value in xfrm6_init().
Chen Zhongjin.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix ignored return value in xfrm6_init()
xfrm: Fix oops in __xfrm_state_delete()
af_key: Fix send_acquire race with pfkey_register
xfrm: replay: Fix ESN wrap around for GSO
xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available
xfrm: fix "disable_policy" on ipv4 early demux
====================
1) Fix regression in ipset hash:ip with IPv4 range, from Vishwanath Pai.
This is fixing up a bug introduced in the 6.0 release.
2) The "netfilter: ipset: enforce documented limit to prevent allocating
huge memory" patch contained a wrong condition which makes impossible to
add up to 64 clashing elements to a hash:net,iface type of set while it
is the documented feature of the set type. The patch fixes the condition
and thus makes possible to add the elements while keeps preventing
allocating huge memory, from Jozsef Kadlecsik. This has been broken
for several releases.
3) Missing locking when updating the flow block list which might lead
a reader to crash. This has been broken since the introduction of the
flowtable hardware offload support.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable_offload: add missing locking
netfilter: ipset: restore allowing 64 clashing elements in hash:net,iface
netfilter: ipset: regression in ip_set_hash_ip.c
====================
Linus Torvalds [Wed, 23 Nov 2022 22:45:33 +0000 (14:45 -0800)]
Merge tag 'pci-v6.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Update MAINTAINERS to add Manivannan Sadhasivam as Qcom PCIe RC
maintainer (replacing Stanimir Varbanov) and include DT PCI bindings
in the "PCI native host bridge and endpoint drivers" entry.
* tag 'pci-v6.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Include PCI bindings in host bridge entry
MAINTAINERS: Add Manivannan Sadhasivam as Qcom PCIe RC maintainer
Linus Torvalds [Wed, 23 Nov 2022 19:19:06 +0000 (11:19 -0800)]
Merge tag 'spi-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes, all device specific.
The most important ones are for the i.MX driver which had a couple of
nasty data corruption inducing errors appear after the change to
support PIO mode in the last merge window (one introduced by the
change and one latent one which the PIO changes exposed).
Thanks to Frieder, Fabio, Marc and Marek for jumping on that and
resolving the issues quickly once they were found"
* tag 'spi-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: spi_imx_transfer_one(): check for DMA transfer first
spi: tegra210-quad: Fix duplicate resource error
spi: dw-dma: decrease reference count in dw_spi_dma_init_mfld()
spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock
spi: mediatek: Fix DEVAPC Violation at KO Remove
Linus Torvalds [Wed, 23 Nov 2022 19:06:09 +0000 (11:06 -0800)]
Merge tag '9p-for-6.1-rc7' of https://github.com/martinetd/linux
Pull 9p fixes from Dominique Martinet:
- 9p now uses a variable size for its recv buffer, but every place
hadn't been updated properly to use it and some buffer overflows have
been found and needed fixing.
There's still one place where msize is incorrectly used in a safety
check (p9_check_errors), but all paths leading to it should already
be avoiding overflows and that patch took a bit more time to get
right for zero-copy requests so I'll send it for 6.2
- yet another race condition in p9_conn_cancel introduced by a fix for
a syzbot report in the same place. Maybe at some point we'll get it
right without burning it all down...
* tag '9p-for-6.1-rc7' of https://github.com/martinetd/linux:
9p/xen: check logical size for buffer size
9p/fd: Use P9_HDRSZ for header size
9p/fd: Fix write overflow in p9_read_work
9p/fd: fix issue of list_del corruption in p9_fd_cancel()
David Howells [Mon, 21 Nov 2022 16:31:34 +0000 (16:31 +0000)]
fscache: fix OOB Read in __fscache_acquire_volume
The type of a->key[0] is char in fscache_volume_same(). If the length
of cache volume key is greater than 127, the value of a->key[0] is less
than 0. In this case, klen becomes much larger than 255 after type
conversion, because the type of klen is size_t. As a result, memcmp()
is read out of bounds.
This causes a slab-out-of-bounds Read in __fscache_acquire_volume(), as
reported by Syzbot.
Fix this by changing the type of the stored key to "u8 *" rather than
"char *" (it isn't a simple string anyway). Also put in a check that
the volume name doesn't exceed NAME_MAX.
Stefan Haberland [Wed, 23 Nov 2022 16:07:18 +0000 (17:07 +0100)]
s390/dasd: fix no record found for raw_track_access
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: e4dbb0f2b5dd ("[S390] dasd: Add support for raw ECKD access.") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Takashi Iwai [Wed, 23 Nov 2022 16:14:10 +0000 (17:14 +0100)]
Merge tag 'asoc-fix-v6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
A clutch of small fixes that have come in in the past week, people seem
to have been unusually active for this late in the release cycle. The
most critical one here is the fix to renumber the SOF DAI types in order
to restore ABI compatibility which was broken by the addition of AMD
support.
Zhen Lei [Tue, 22 Nov 2022 11:50:02 +0000 (19:50 +0800)]
btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
Although kset_unregister() can eventually remove all attribute files,
explicitly rolling back with the matching function makes the code logic
look clearer.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 21 Nov 2022 10:23:22 +0000 (10:23 +0000)]
btrfs: do not modify log tree while holding a leaf from fs tree locked
When logging an inode in full mode, or when logging xattrs or when logging
the dir index items of a directory, we are modifying the log tree while
holding a read lock on a leaf from the fs/subvolume tree. This can lead to
a deadlock in rare circumstances, but it is a real possibility, and it was
recently reported by syzbot with the following trace from lockdep:
WARNING: possible circular locking dependency detected
6.1.0-rc5-next-20221116-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.1/16154 is trying to acquire lock: ffff88807e3084a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256
but task is already holding lock: ffff88807df33078 (btrfs-log-00){++++}-{3:3}, at: __btrfs_tree_lock+0x32/0x3d0 fs/btrfs/locking.c:197
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
Holding a read lock on a leaf from a fs/subvolume tree creates a nasty
lock dependency when we are COWing extent buffers for the log tree and we
have two tasks modifying the log tree, with each one in one of the
following 2 scenarios:
1) Modifying the log tree triggers an extent buffer allocation while
holding a write lock on a parent extent buffer from the log tree.
Allocating the pages for an extent buffer, or the extent buffer
struct, can trigger inode eviction and finally the inode eviction
will trigger a release/remove of a delayed node, which requires
taking the delayed node's mutex;
2) Allocating a metadata extent for a log tree can trigger the async
reclaim thread and make us wait for it to release enough space and
unblock our reservation ticket. The reclaim thread can start flushing
delayed items, and that in turn results in the need to lock delayed
node mutexes and in the need to write lock extent buffers of a
subvolume tree - all this while holding a write lock on the parent
extent buffer in the log tree.
So one task in scenario 1) running in parallel with another task in
scenario 2) could lead to a deadlock, one wanting to lock a delayed node
mutex while having a read lock on a leaf from the subvolume, while the
other is holding the delayed node's mutex and wants to write lock the same
subvolume leaf for flushing delayed items.
Fix this by cloning the leaf of the fs/subvolume tree, release/unlock the
fs/subvolume leaf and use the clone leaf instead.
Reported-by: syzbot+9b7c21f486f5e7f8d029@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000ccc93c05edc4d8cf@google.com/ CC: stable@vger.kernel.org # 6.0+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Otherwise the kernel memory allocator seems to be unhappy about failing
order 6 allocations for the zones array, that cause 100% reproducible
mount failures in my qemu setup:
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Jane Jian [Wed, 16 Nov 2022 10:22:52 +0000 (18:22 +0800)]
drm/amdgpu/vcn: re-use original vcn0 doorbell value
root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling drm_connector_update_edid_property() in
amdgpu_connector_free_edid() causes a noticeable pause in
the system every 10 seconds on polled outputs so revert this
part of the change.
Tsung-hua Lin [Wed, 9 Nov 2022 04:54:22 +0000 (12:54 +0800)]
drm/amd/display: No display after resume from WB/CB
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in fix (Alex)
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Fri, 11 Nov 2022 19:06:58 +0000 (14:06 -0500)]
drm/amd/display: Use new num clk levels struct for max mclk index
[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.
[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 11 Nov 2022 19:11:00 +0000 (14:11 -0500)]
drm/amd/display: Avoid setting pixel rate divider to N/A
[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.
[How]
Set valid divider values for virtual and FRL/DP2 cases.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 10 Nov 2022 17:13:47 +0000 (12:13 -0500)]
drm/amd/display: Use viewport height for subvp mall allocation size
[WHY?]
MALL allocation size depends on the viewport height, not the addressable
vertical lines, which will not match when scaling.
[HOW?]
Base MALL allocation size calculations off viewport height.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Mon, 7 Nov 2022 20:18:47 +0000 (15:18 -0500)]
drm/amd/display: Update soc bounding box for dcn32/dcn321
[Description]
New values for soc bounding box and dummy pstate.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
ZLP for DisplayLink ethernet devices was enabled in 6.0: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.
usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")
Without this hook, multicast, and then IPv6 SLAAC, is broken.
Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices") Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Tronchin [Mon, 21 Nov 2022 12:54:55 +0000 (13:54 +0100)]
net: usb: qmi_wwan: add u-blox 0x1342 composition
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Mon, 21 Nov 2022 08:54:26 +0000 (09:54 +0100)]
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
When holding a reader-writer spin lock we cannot sleep. Calling
setup_udp_tunnel_sock() with write lock held violates this rule, because we
end up calling percpu_down_read(), which might sleep, as syzbot reports
[1]:
Trim the writer-side critical section for sk_callback_lock down to the
minimum, so that it covers only operations on sk_user_data.
Also, when grabbing the sk_callback_lock, we always need to disable BH, as
Eric points out. Failing to do so leads to deadlocks because we acquire
sk_callback_lock in softirq context, which can get stuck waiting on us if:
v2:
- Check and set sk_user_data while holding sk_callback_lock for both
L2TP encapsulation types (IP and UDP) (Tetsuo)
Cc: Tom Parkin <tparkin@katalix.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Fixes: b68777d54fac ("l2tp: Serialize access to sk_user_data with sk_callback_lock") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+703d9e154b3b58277261@syzkaller.appspotmail.com Reported-by: syzbot+50680ced9e98a61f7698@syzkaller.appspotmail.com Reported-by: syzbot+de987172bb74a381879b@syzkaller.appspotmail.com Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuan Can [Mon, 21 Nov 2022 03:32:26 +0000 (03:32 +0000)]
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
The dm9051_loop_rx() returns without release skb when dm9051_stop_mrcmd()
returns error, free the skb to avoid this leak.
Fixes: 2dc95a4d30ed ("net: Add dm9051 driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Sun, 20 Nov 2022 06:24:38 +0000 (14:24 +0800)]
arcnet: fix potential memory leak in com20020_probe()
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
trans_xen did not check the data fits into the buffer before copying
from the xen ring, but we probably should.
Add a check that just skips the request and return an error to
userspace if it did not fit
Jakub Kicinski [Wed, 23 Nov 2022 04:20:58 +0000 (20:20 -0800)]
Merge tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix possible race condition in macsec extended packet number update routine
net/mlx5e: Fix MACsec update SecY
net/mlx5e: Fix MACsec SA initialization routine
net/mlx5e: Remove leftovers from old XSK queues enumeration
net/mlx5e: Offload rule only when all encaps are valid
net/mlx5e: Fix missing alignment in size of MTT/KLM entries
net/mlx5: Fix sync reset event handler error flow
net/mlx5: E-Switch, Set correctly vport destination
net/mlx5: Lag, avoid lockdep warnings
net/mlx5: Fix handling of entry refcount when command is not issued to FW
net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
net/mlx5: SF: Fix probing active SFs during driver probe phase
net/mlx5: Fix FW tracer timestamp calculation
net/mlx5: Do not query pci info while pci disabled
====================
Yan Cangang [Sun, 20 Nov 2022 05:52:59 +0000 (13:52 +0800)]
net: ethernet: mtk_eth_soc: fix memory leak in error path
In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.
Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by: Yan Cangang <nalanzeyu@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ziyang Xuan [Sun, 20 Nov 2022 03:54:05 +0000 (11:54 +0800)]
net: ethernet: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.
Add skb_free_frag(data) when dma_map_single() failed.
Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
dccp/tcp: Fix bhash2 issues related to WARN_ON() in inet_csk_get_port().
syzkaller was hitting a WARN_ON() in inet_csk_get_port() in the 4th patch,
which was because we forgot to fix up bhash2 bucket when connect() for a
socket bound to a wildcard address fails in __inet_stream_connect().
There was a similar report [0], but its repro does not fire the WARN_ON() due
to inconsistent error handling.
When connect() for a socket bound to a wildcard address fails, saddr may or
may not be reset depending on where the failure happens. When we fail in
__inet_stream_connect(), sk->sk_prot->disconnect() resets saddr. OTOH, in
(dccp|tcp)_v[46]_connect(), if we fail after inet_hash6?_connect(), we
forget to reset saddr.
We fix this inconsistent error handling in the 1st patch, and then we'll
fix the bhash2 WARN_ON() issue.
Note that there is still an issue in that we reset saddr without checking
if there are conflicting sockets in bhash and bhash2, but this should be
another series.
dccp/tcp: Fixup bhash2 bucket when connect() fails.
If a socket bound to a wildcard address fails to connect(), we
only reset saddr and keep the port. Then, we have to fix up the
bhash2 bucket; otherwise, the bucket has an inconsistent address
in the list.
Also, listen() for such a socket will fire the WARN_ON() in
inet_csk_get_port(). [0]
Note that when a system runs out of memory, we give up fixing the
bucket and unlink sk from bhash and bhash2 by inet_put_port().
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly. However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.
dccp/tcp: Reset saddr on failure after inet6?_hash_connect().
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
Li Hua [Mon, 21 Nov 2022 03:06:20 +0000 (11:06 +0800)]
test_kprobes: fix implicit declaration error of test_kprobes
If KPROBES_SANITY_TEST and ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled, but
STACKTRACE is not set. Build failed as below:
lib/test_kprobes.c: In function `stacktrace_return_handler':
lib/test_kprobes.c:228:8: error: implicit declaration of function `stack_trace_save'; did you mean `stacktrace_driver'? [-Werror=implicit-function-declaration]
ret = stack_trace_save(stack_buf, STACK_BUF_SIZE, 0);
^~~~~~~~~~~~~~~~
stacktrace_driver
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'lib/test_kprobes.o' failed
make[2]: *** [lib/test_kprobes.o] Error 1
To fix this error, Select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled.
Link: https://lkml.kernel.org/r/20221121030620.63181-1-hucool.lihua@huawei.com Fixes: 1f6d3a8f5e39 ("kprobes: Add a test case for stacktrace from kretprobe handler") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chen Zhongjin [Fri, 18 Nov 2022 06:33:04 +0000 (14:33 +0800)]
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.
But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.
This case started with segbuf1.segnum = 3, nextnum = 4 when constructed.
It supposed segment 4 has already been allocated and marked as dirty.
However the dirty state was corrupted and segment 4 usage was not dirty.
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.
sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf. It makes the lists broken which
causes NULL pointer dereference.
Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
balance_dirty_pages doesn't do the required dirty throttling on cgroupv1.
See commit 9badce000e2c ("cgroup, writeback: don't enable cgroup writeback
on traditional hierarchies"). Instead, the kernel depends on writeback
throttling in shrink_folio_list to achieve the same goal. With large
memory systems, the flusher may not be able to writeback quickly enough
such that we will start finding pages in the shrink_folio_list already in
writeback. Hence for cgroupv1 let's do a reclaim throttle after waking up
the flusher.
The below test which used to fail on a 256GB system completes till the the
file system is full with this change.
Qi Zheng [Fri, 18 Nov 2022 10:00:11 +0000 (18:00 +0800)]
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
When we specify __GFP_NOWARN, we only expect that no warnings will be
issued for current caller. But in the __should_failslab() and
__should_fail_alloc_page(), the local GFP flags alter the global
{failslab|fail_page_alloc}.attr, which is persistent and shared by all
tasks. This is not what we expected, let's fix it.
[akpm@linux-foundation.org: unexport should_fail_ex()] Link: https://lkml.kernel.org/r/20221118100011.2634-1-zhengqi.arch@bytedance.com Fixes: 3f913fc5f974 ("mm: fix missing handler for __GFP_NOWARN") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chen Wandun [Fri, 18 Nov 2022 13:38:50 +0000 (21:38 +0800)]
swapfile: fix soft lockup in scan_swap_map_slots
A softlockup occurs in scan free swap slot under huge memory pressure.
The test scenario is: 64 CPU cores, 64GB memory, and 28 zram devices, the
disksize of each zram device is 50MB.
LATENCY_LIMIT is used to prevent softlockups in scan_swap_map_slots(), but
the real loop number would more than LATENCY_LIMIT because of "goto checks
and goto scan" repeatly without decreasing latency limit.
In order to fix it, decrease latency_ration in advance.
There is also a suspicious place that will cause softlockups in
get_swap_pages(). In this function, the "goto start_over" may result in
continuous scanning of the swap partition. If there is no cond_sched in
scan_swap_map_slots(), it would cause a softlockup (I am not sure about
this).
Mike Kravetz [Fri, 18 Nov 2022 19:52:49 +0000 (11:52 -0800)]
hugetlb: fix __prep_compound_gigantic_page page flag setting
Commit 2b21624fc232 ("hugetlb: freeze allocated pages before creating
hugetlb pages") changed the order page flags were cleared and set in the
head page. It moved the __ClearPageReserved after __SetPageHead.
However, there is a check to make sure __ClearPageReserved is never done
on a head page. If CONFIG_DEBUG_VM_PGFLAGS is enabled, the following BUG
will be hit when creating a hugetlb gigantic page:
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:500!
Call Trace will differ depending on whether hugetlb page is created
at boot time or run time.
Make sure to __ClearPageReserved BEFORE __SetPageHead.
Link: https://lkml.kernel.org/r/20221118195249.178319-1-mike.kravetz@oracle.com Fixes: 2b21624fc232 ("hugetlb: freeze allocated pages before creating hugetlb pages") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Tested-by: Tarun Sahu <tsahu@linux.ibm.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marco Elver [Fri, 18 Nov 2022 15:22:16 +0000 (16:22 +0100)]
kfence: fix stack trace pruning
Commit b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
refactored large parts of the kmalloc subsystem, resulting in the stack
trace pruning logic done by KFENCE to no longer work.
While b14051352465 attempted to fix the situation by including
'__kmem_cache_free' in the list of functions KFENCE should skip through,
this only works when the compiler actually optimized the tail call from
kfree() to __kmem_cache_free() into a jump (and thus kfree() _not_
appearing in the full stack trace to begin with).
In some configurations, the compiler no longer optimizes the tail call
into a jump, and __kmem_cache_free() appears in the stack trace. This
means that the pruned stack trace shown by KFENCE would include kfree()
which is not intended - for example:
| BUG: KFENCE: invalid free in kfree+0x7c/0x120
|
| Invalid free of 0xffff8883ed8fefe0 (in kfence-#126):
| kfree+0x7c/0x120
| test_double_free+0x116/0x1a9
| kunit_try_run_case+0x90/0xd0
| [...]
Fix it by moving __kmem_cache_free() to the list of functions that may be
tail called by an allocator entry function, making the pruning logic work
in both the optimized and unoptimized tail call cases.
Link: https://lkml.kernel.org/r/20221118152216.3914899-1-elver@google.com Fixes: b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem") Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Wed, 16 Nov 2022 01:38:07 +0000 (18:38 -0700)]
mm: multi-gen LRU: retry folios written back while isolated
The page reclaim isolates a batch of folios from the tail of one of the
LRU lists and works on those folios one by one. For a suitable
swap-backed folio, if the swap device is async, it queues that folio for
writeback. After the page reclaim finishes an entire batch, it puts back
the folios it queued for writeback to the head of the original LRU list.
In the meantime, the page writeback flushes the queued folios also by
batches. Its batching logic is independent from that of the page reclaim.
For each of the folios it writes back, the page writeback calls
folio_rotate_reclaimable() which tries to rotate a folio to the tail.
folio_rotate_reclaimable() only works for a folio after the page reclaim
has put it back. If an async swap device is fast enough, the page
writeback can finish with that folio while the page reclaim is still
working on the rest of the batch containing it. In this case, that folio
will remain at the head and the page reclaim will not retry it before
reaching there.
This patch adds a retry to evict_folios(). After evict_folios() has
finished an entire batch and before it puts back folios it cannot free
immediately, it retries those that may have missed the rotation.
Before this patch, ~60% of folios swapped to an Intel Optane missed
folio_rotate_reclaimable(). After this patch, ~99% of missed folios were
reclaimed upon retry.
This problem affects relatively slow async swap devices like Samsung 980
Pro much less and does not affect sync swap devices like zram or zswap at
all.
Alistair Popple [Fri, 11 Nov 2022 00:51:35 +0000 (11:51 +1100)]
mm/migrate_device: return number of migrating pages in args->cpages
migrate_vma->cpages originally contained a count of the number of pages
migrating including non-present pages which can be populated directly on
the target.
Commit 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and
migrate_device_coherent_page()") inadvertantly changed this to contain
just the number of pages that were unmapped. Usage of migrate_vma->cpages
isn't documented, but most drivers use it to see if all the requested
addresses can be migrated so restore the original behaviour.
Link: https://lkml.kernel.org/r/20221111005135.1344004-1-apopple@nvidia.com Fixes: 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reported-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sam James [Wed, 16 Nov 2022 18:26:34 +0000 (18:26 +0000)]
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
Add missing <linux/string.h> include for strcmp.
Clang 16 makes -Wimplicit-function-declaration an error by default.
Unfortunately, out of tree modules may use this in configure scripts,
which means failure might cause silent miscompilation or misconfiguration.
For more information, see LWN.net [0] or LLVM's Discourse [1], gentoo-dev@ [2],
or the (new) c-std-porting mailing list [3].
[0] https://lwn.net/Articles/913505/
[1] https://discourse.llvm.org/t/configure-script-breakage-with-the-new-werror-implicit-function-declaration/65213
[2] https://archives.gentoo.org/gentoo-dev/message/dd9f2d3082b8b6f8dfbccb0639e6e240
[3] hosted at lists.linux.dev.