Linus Torvalds [Tue, 18 Mar 2008 14:43:14 +0000 (07:43 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "unexport bio_{,un}map_user"
relay: fix subbuf_splice_actor() adding too many pages
The ps2esdi driver was marked as BROKEN more than two years ago due to being
Linus Torvalds [Tue, 18 Mar 2008 14:32:23 +0000 (07:32 -0700)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/ati_pcigart: fix the PCIGART to use drm_pci to allocate GART table.
drm/radeon: fixup RV550 chip family
drm/via: attempt again to stabilise the AGP DMA command submission.
drm: Fix race that can lockup the kernel
Mark Lord [Mon, 17 Mar 2008 20:04:23 +0000 (16:04 -0400)]
pciehp: don't enable slot unless forced
This fixes a 2.6.25 regression reported by Alex Chiang.
Invoke pciehp_enable_slot() at startup only when pciehp_force=1.
Some HP equipment apparently cannot cope with it otherwise.
This restores the (previously working) 2.6.24 behaviour here,
while allowing machines that need a kick to use pciehp_force=1.
This was the original design back in October 2007,
but Kristen suggested we try without it first:
Kristen Carlson Accardi wrote:
>I think it would be ok to try allowing the slot to be enabled when not
>using pciehp_force mode. We can wrap it later if it proves to break things
This ended up breaking one of Alex's setups,
so it's time to put the wrapper back in now.
Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: Alex Chiang <achiang@hp.com> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Mon, 17 Mar 2008 20:14:40 +0000 (21:14 +0100)]
Revert "unexport bio_{,un}map_user"
Outside users like asmlib uses the mapping functions. API wise, the
export is definitely sane. It's a better idea to keep this export
than to require external users to open-code this piece of code instead.
Linus Torvalds [Mon, 17 Mar 2008 16:52:24 +0000 (09:52 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ahci: Add Marvell 6121 SATA support
pata_ali: use atapi_cmd_type() to determine cmd type instead of transfer size
ahci: implement skip_host_reset parameter
ahci: request all PCI BARs
devres: implement pcim_iomap_regions_request_all()
libata-acpi: improve dock event handling
Tejun Heo [Tue, 11 Mar 2008 02:35:00 +0000 (11:35 +0900)]
pata_ali: use atapi_cmd_type() to determine cmd type instead of transfer size
pata_ali was using qc->nbytes to determine whether a command is
data transfer type or not. As now qc->nbytes can be extended by
padding and draining buffers, these tests are not useful anymore.
Use atapi_cmd_type() instead.
Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 10 Mar 2008 01:25:25 +0000 (10:25 +0900)]
ahci: implement skip_host_reset parameter
Under certain circumstances (SSP turned off by the BIOS) and for
debugging purposes, skipping global controller reset is helpful. Add
a kernel parameter for it.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Tue, 11 Mar 2008 10:52:31 +0000 (19:52 +0900)]
ahci: request all PCI BARs
ahci is often implemented with accompanying SFF compatible interface
and legacy IDE driver may attach to the legacy IO ports when the
controller is already claimed by ahci and vice-versa. This patch
makes ahci use pcim_iomap_regions_request_all() so that all IO regions
are claimed on attach.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Some drivers need to reserve all PCI BARs to prevent other drivers
misusing unoccupied BARs. pcim_iomap_regions_request_all() requests
all BARs and iomap specified BARs.
Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
The problem can be triggered with a high amount of host->guest traffic.
I think its the following race:
poll says netif_rx_complete
poll calls enable_cb
enable_cb opens the interrupt mask
a new packet comes, an interrupt is triggered----\
enable_cb sees that there is more work |
enable_cb disables the interrupt |
. V
. interrupt is delivered
. skb_recv_done does atomic napi test, ok
some waiting disable_cb is called->check fails->bang!
.
poll would do napi check
poll would do disable_cb
The fix is to let enable_cb not disable the interrupt again, but expect the
caller to do the cleanup if it returns false. In that case, the interrupt is
only disabled, if the napi test_set_bit was successful.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned up doco)
Rusty Russell [Tue, 18 Mar 2008 03:58:15 +0000 (22:58 -0500)]
virtio: handle > 2 billion page balloon targets
If the host asks for a huge target towards_target() can overflow, and
we up oops as we try to release more pages than we have. The simple
fix is to use a 64-bit value.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Anthony Liguori [Sun, 2 Mar 2008 22:37:48 +0000 (16:37 -0600)]
virtio: Use spin_lock_irqsave/restore for virtio-pci
virtio-pci acquires its spin lock in an interrupt context so it's necessary
to use spin_lock_irqsave/restore variants. This patch fixes guest SMP when
using virtio devices in KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thomas Hellstrom [Mon, 17 Mar 2008 00:07:20 +0000 (10:07 +1000)]
drm/via: attempt again to stabilise the AGP DMA command submission.
It's worth remembering that all new bright ideas on how to make this command reader work properly and according to docs will probably fail :( Bring in some old code.
Also allow a larger SG-DMA download stride, and remove unnecessary waits for
command regulators pauses.
Mike Isely [Thu, 13 Mar 2008 20:30:35 +0000 (15:30 -0500)]
drm: Fix race that can lockup the kernel
The i915_vblank_swap() function schedules an automatic buffer swap
upon receipt of the vertical sync interrupt. Such an operation is
lengthy so it can't be allowed to happen in normal interrupt context,
thus the DRM implements this by scheduling the work in a kernel
softirq-scheduled tasklet. In order for the buffer swap to work
safely, the DRM's central lock must be taken, via a call to
drm_lock_take() located in drivers/char/drm/drm_irq.c within the
function drm_locked_tasklet_func(). The lock-taking logic uses a
non-interrupt-blocking spinlock to implement the manipulations needed
to take the lock. This semantic would be safe if all attempts to use
the spinlock only happen from process context. However this buffer
swap happens from softirq context which is really a form of interrupt
context. Thus we have an unsafe situation, in that
drm_locked_tasklet_func() can block on a spinlock already taken by a
thread in process context which will never get scheduled again because
of the blocked softirq tasklet. This wedges the kernel hard.
To trigger this bug, run a dual-head cloned mode configuration which
uses the i915 drm, then execute an opengl application which
synchronizes buffer swaps against the vertical sync interrupt. In my
testing, a lockup always results after running anywhere from 5 minutes
to an hour and a half. I believe dual-head is needed to really
trigger the problem because then the vertical sync interrupt handling
is no longer predictable (due to being interrupt-sourced from two
different heads running at different speeds). This raises the
probability of the tasklet trying to run while the userspace DRI is
doing things to the GPU (and manipulating the DRM lock).
The fix is to change the relevant spinlock semantics to be the
interrupt-blocking form. After this change I am no longer able to
trigger the lockup; the longest test run so far was 20 hours (test
stopped after that point).
Note: I have examined the places where this spinlock is being
employed; all are reasonably short bounded sequences and should be
suitable for interrupts being blocked without impacting overall kernel
interrupt response latency.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Helge Deller [Wed, 26 Dec 2007 17:07:01 +0000 (18:07 +0100)]
[PARISC] head.S: section mismatch fixes
- move boot_args[] into the init section
- move $global$ into the read_mostly section
- fix the following two section mismatches:
WARNING: vmlinux.o(.text+0x9c): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20')
WARNING: vmlinux.o(.text+0xa0): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20')
This is bogus on parisc, since page zero in kernel virtual space is the
gateway page for syscall entry, and should not be read from the kernel.
(That, and we really don't like the kernel faulting on its own address
space...)
Kyle McMartin [Sat, 1 Mar 2008 18:30:19 +0000 (10:30 -0800)]
[PARISC] clean up show_stack
When we show_regs, we obviously have a struct pt_regs of the calling
frame. Use these in show_stack so we don't have the entire bogus call trace
up to the show_stack call.
Adrian Bunk [Tue, 26 Feb 2008 19:55:17 +0000 (21:55 +0200)]
[PARISC] move defconfig to arch/parisc/configs/
This patch moves the default parisc defconfig to
arch/parisc/configs/generic_defconfig where it belongs and selects it as
the default defconfig through KBUILD_DEFCONFIG.
Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Kyle McMartin [Tue, 19 Feb 2008 07:34:34 +0000 (23:34 -0800)]
[PARISC] pdc_console: fix bizarre panic on boot
Commit 721fdf34167580ff98263c74cead8871d76936e6 introduced a subtle bug
by accidently removing the "static" from iodc_dbuf. This resulted in, what
appeared to be, a trap without *current set to a task. Probably the result of
a trap in real mode while calling firmware.
Also do other misc clean ups. Since the only input from firmware is non
blocking, share iodc_dbuf between input and output, and spinlock the
only callers.
Kyle McMartin [Tue, 19 Feb 2008 07:26:46 +0000 (23:26 -0800)]
[PARISC] dump_stack in show_regs
Originally, show_stack was used in BUG() output. However, a recent commit
changed it to print register state (no idea what that's supposed to help,
really...) and parisc was missing a backtrace because of it.
It did ugly things to the init sequence to populate the rootfs image
early, but that just ended up showing other problems with the whole
approach. The fact is, the VFS layer simply isn't initialized this
early, and the relevant ACPI code should either run much later, or this
shouldn't be done at all.
For 2.6.25, we'll just pick the latter option. We can revisit this
concept later if necessary.
Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Renninger <trenn@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Len Brown <len.brown@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Markus Gaugusch <dsdt@gaugusch.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Fri, 14 Mar 2008 21:17:08 +0000 (22:17 +0100)]
sched: simplify sched_slice()
Use the existing calc_delta_mine() calculation for sched_slice(). This
saves a divide and simplifies the code because we share it with the
other /cfs_rq->load users.
It also improves code size:
text data bss dec hex filename
42659 2740 144 45543 b1e7 sched.o.before
42093 2740 144 44977 afb1 sched.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Peter Zijlstra [Fri, 14 Mar 2008 20:12:12 +0000 (21:12 +0100)]
sched: fix overload performance: buddy wakeups
Currently we schedule to the leftmost task in the runqueue. When the
runtimes are very short because of some server/client ping-pong,
especially in over-saturated workloads, this will cycle through all
tasks trashing the cache.
Reduce cache trashing by keeping dependent tasks together by running
newly woken tasks first. However, by not running the leftmost task first
we could starve tasks because the wakee can gain unlimited runtime.
Therefore we only run the wakee if its within a small
(wakeup_granularity) window of the leftmost task. This preserves
fairness, but does alternate server/client task groups.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Fri, 14 Mar 2008 19:55:51 +0000 (20:55 +0100)]
sched: min_vruntime fix
Current min_vruntime tracking is incorrect and will cause serious
problems when we don't run the leftmost task for some reason.
min_vruntime does two things; 1) it's used to determine a forward
direction when the u64 vruntime wraps, 2) it's used to track the
leftmost vruntime to position newly enqueued tasks from.
The current logic advances min_vruntime whenever the current task's
vruntime advance. Because the current task may pass the leftmost task
still waiting we're failing the second goal. This causes new tasks to be
placed too far ahead and thus penalizes their runtime.
Fix this by making min_vruntime the min_vruntime of the waiting tasks by
tracking it in enqueue/dequeue, and compare against current's vruntime
to obtain the absolute minimum when placing new tasks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a hard to trigger crash seen in the -rt kernel that also affects
the vanilla scheduler.
There is a race condition between schedule() and some dequeue/enqueue
functions; rt_mutex_setprio(), __setscheduler() and sched_move_task().
When scheduling to idle, idle_balance() is called to pull tasks from
other busy processor. It might drop the rq lock. It means that those 3
functions encounter on_rq=0 and running=1. The current task should be
put when running.
The current process of CPU1(P1) is scheduling. Deactivated P1, and the
scheduler looks for another process on other CPU's runqueue because CPU1
will be idle. idle_balance(), load_balance_newidle() and
double_lock_balance() are called and double_lock_balance() could drop
the rq lock. On the other hand, CPU0 is trying to boost the priority of
P1. The result of boosting only P1's prio and sched_class are changed to
RT. The sched entities of P1 and P1's group are never put. It makes
cfs_rq invalid, because the cfs_rq has curr and no leaf, but
pick_next_task_fair() is called, then the kernel panics.
J. Bruce Fields [Fri, 14 Mar 2008 23:37:11 +0000 (19:37 -0400)]
nfsd: fix oops on access from high-numbered ports
This bug was always here, but before my commit 6fa02839bf9412e18e77
("recheck for secure ports in fh_verify"), it could only be triggered by
failure of a kmalloc(). After that commit it could be triggered by a
client making a request from a non-reserved port for access to an export
marked "secure". (Exports are "secure" by default.)
The result is a struct svc_export with a reference count one too low,
resulting in likely oopses next time the export is accessed.
The reference counting here is not straightforward; a later patch will
clean up fh_verify().
Thanks to Lukas Hejtmanek for the bug report and followup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jarod Wilson [Wed, 12 Mar 2008 21:43:26 +0000 (17:43 -0400)]
firewire: fw-ohci: use dma_alloc_coherent for ar_buffer
Currently, we do nothing to guarantee we have a consistent DMA buffer for
asynchronous receive packets. Rather than doing several sync's following a
dma_map_single() to get consistent buffers, just switch to using
dma_alloc_coherent().
Resolves constant buffer failures on my own x86_64 laptop w/4GB of RAM and
likely to fix a number of other failures witnessed on x86_64 systems with
4GB of RAM or more.
Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Stefan Richter [Tue, 11 Mar 2008 21:32:52 +0000 (22:32 +0100)]
ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes. Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> for
firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879
This fix is necessary because sbp2's default request size limit has been
lifted since 2.6.25-rc1.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Stefan Richter [Tue, 11 Mar 2008 21:32:03 +0000 (22:32 +0100)]
firewire: fw-sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes. Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> in
https://bugzilla.redhat.com/show_bug.cgi?id=436879
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Jarod Wilson [Fri, 7 Mar 2008 06:43:01 +0000 (01:43 -0500)]
firewire: fw-sbp2: set single-phase retry_limit
Per the SBP-2 specification, all SBP-2 target devices must have a BUSY_TIMEOUT
register. Per the 1394-1995 specification, the retry_limt portion of the
register should be set to 0x0 initially, and set on the target by a logged in
initiator (i.e., a Linux host w/firewire controller(s)).
Well, as it turns out, lots of devices these days have actually moved on to
starting to implement SBP-3 compliance, which says that retry_limit should
default to 0xf instead (yes, SBP-3 stomps directly on 1394-1995, oops).
Prior to this change, the firewire driver stack didn't touch retry_limit, and
any SBP-3 compliant device worked fine, while SBP-2 compliant ones were unable
to retransmit when the host returned an ack_busy_X, which resulted in stalled
out I/O, eventually causing the SCSI layer to give up and offline the device.
The simple fix is for us to set retry_limit to 0xf in the register for all
devices (which actually matches what the old ieee1394 stack did).
Prior to this change, a hard disk behind an SBP-2 Prolific PL-3507 bridge chip
would routinely encounter buffer I/O errors and wind up offlined by the SCSI
layer. With this change, I've encountered zero I/O failures moving tens of GB
of data around.
Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Stefan Richter [Sat, 1 Mar 2008 01:42:56 +0000 (02:42 +0100)]
firewire: fw-ohci: PPC PMac platform code
Copied from ohci1394.c. This code is necessary to prevent machine check
exceptions when reloading or resuming the driver.
Tested on a 1st generation PowerBook G4 Titanium, which also needs the
pci_probe() hunk.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
I was able to reproduce the system exception on resume with a 3rd-gen
Titanium PowerBook G4 667, and this patch does let the system resume
successfully now.
Not quite clear if there was possibly an updated version coming using
pci_enable_device() instead of the pair of pmac_call_feature() calls,
but either way, this is a definite must-have, at least for older ppc
macs -- my Aluminum PowerBook G4/1.67 suspends and resumes without this
patch just fine.
Signed-off-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Stefan Richter [Sat, 23 Feb 2008 11:24:57 +0000 (12:24 +0100)]
firewire: endianess annotations
Kills warnings from 'make C=1 CHECKFLAGS="-D__CHECK_ENDIAN__" modules':
drivers/firewire/fw-transaction.c:771:10: warning: incorrect type in assignment (different base types)
drivers/firewire/fw-transaction.c:771:10: expected unsigned int [unsigned] [usertype] <noident>
drivers/firewire/fw-transaction.c:771:10: got restricted unsigned int [usertype] <noident>
drivers/firewire/fw-transaction.h:93:10: warning: incorrect type in assignment (different base types)
drivers/firewire/fw-transaction.h:93:10: expected unsigned int [unsigned] [usertype] <noident>
drivers/firewire/fw-transaction.h:93:10: got restricted unsigned int [usertype] <noident>
drivers/firewire/fw-ohci.c:1490:8: warning: restricted degrades to integer
drivers/firewire/fw-ohci.c:1490:35: warning: restricted degrades to integer
drivers/firewire/fw-ohci.c:1516:5: warning: cast to restricted type
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Linus Torvalds [Thu, 13 Mar 2008 20:25:32 +0000 (13:25 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IPoIB: Allocate priv->tx_ring with vmalloc()
IPoIB/cm: Set tx_wr.num_sge in connected mode post_send()
IPoIB: Don't drop multicast sends when they can be queued
IB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets
IB/ipath: Fix error completion put on send CQ instead of recv CQ
IB/ipath: Fix RC QP initialization
IB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp()
IB/ipath: Fix IB compliance problems with link state vs physical state
Jan Beulich [Thu, 13 Mar 2008 09:13:30 +0000 (09:13 +0000)]
avoid endless loops in lib/swiotlb.c
Commit 681cc5cd3efbeafca6386114070e0bfb5012e249 ("iommu sg merging:
swiotlb: respect the segment boundary limits") introduced two
possibilities for entering an endless loop in lib/swiotlb.c:
- if max_slots is zero (possible if mask is ~0UL)
- if the number of slots requested fits into a swiotlb segment, but is
too large for the part of a segment which remains after considering
offset_slots
This fixes them
Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 13 Mar 2008 20:13:47 +0000 (13:13 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits)
ACPI: thermal: show temperature in millidegree Celsius
thermal: fix generic thermal I/F for hwmon
acer-wmi: build depends on i8042
documentation: Move power-related files to Documentation/power/
ACPI: buffer array too short in drivers/acpi/system.c
acer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610
acer-wmi: Fix DSDT path in documentation
acer-wmi: Make device detection error messages more descriptive
laptops: move laptop-mode.txt to Documentation/laptops/
ACPICA: Warn if packages with invalid references are evaluated
ACPI: add _PRT quirks to work around broken firmware
Hibernation: Fix mark_nosave_pages()
ACPI: Ignore _BQC object when registering backlight device
ACPI: WMI: Clean up handling of spec violating data blocks
acer-wmi: Don't warn if mail LED cannot be detected
acer-wmi: Rename mail LED correctly & remove hardcoded colour
ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify()
ACPI: button: make real parent for input devices in device tree
toshiba_acpi: Enable autoloading
ACPI: EC: Handle IRQ storm on Acer laptops
...
Jiri Slaby [Thu, 13 Mar 2008 19:32:43 +0000 (12:32 -0700)]
block: floppy: fix rmmod lockup
Floppy rmmod locks up when no such hardware was initialized, since there is
nobody to wake the remove code up. Remove the completion, because release is
called during platform_unregister anyway.
Randy Dunlap [Thu, 13 Mar 2008 19:32:43 +0000 (12:32 -0700)]
kernel-doc: set verbose mode via environment
Honor the environment variable "KBUILD_VERBOSE=1" (as set by make V=1) to
enable verbose mode in scripts/kernel-doc. Useful for getting more info and
warnings from kernel-doc.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Nikitenko [Thu, 13 Mar 2008 19:32:39 +0000 (12:32 -0700)]
spi_bitbang: short transfer status fix
SPI controller drivers return number of bytes actually transfered from
bitbang->txrx_bufs() method. This updates handling of short transfers (where
the transfer size is less than requested):
- Even zero byte short transfers should report errors;
- Include short transfers in the total of transferred bytes;
- Use EREMOTEIO (like USB) not EMSGSIZE to report short transfers
Short transfers don't normally mean invalid message sizes, but if the
underlying controller driver needs to use EMSGSIZE it can still do so.
[db: fix two more minor issues] Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshinori Sato [Thu, 13 Mar 2008 19:32:37 +0000 (12:32 -0700)]
h8300: fix recent uaccess breakage
Al Viro wrote:
>
> After that commit in asm-h8300/uaccess.h we have
>
> #define get_user(x, ptr) \
> ({ \
> int __gu_err = 0; \
> uint32_t __gu_val = 0; \
> ^^^^^^^^^^^^^^^^^
> switch (sizeof(*(ptr))) { \
> case 1: \
> case 2: \
> case 4: \
> __gu_val = *(ptr); \
> break; \
> case 8: \
> memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
> ^^^^^^^^^^^^^^^^
>
> which, of course, is FUBAR whenever we actually hit that case - memcpy of
> 8 bytes into uint32_t is obviously wrong. Why don't we simply do
Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ahmed S. Darwish [Thu, 13 Mar 2008 19:32:34 +0000 (12:32 -0700)]
smackfs: do not trust `count' in inodes write()s
Smackfs write() implementation does not put a higher bound on the number of
bytes to copy from user-space. This may lead to a DOS attack if a malicious
`count' field is given.
Assure that given `count' is exactly the length needed for a /smack/load rule.
In case of /smack/cipso where the length is relative, assure that `count'
does not exceed the size needed for a buffer representing maximum possible
number of CIPSO 2.2 categories.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
fsldma: Add a completed cookie updated action in DMA finish interrupt.
The patch 'fsldma: do not cleanup descriptors in hardirq context'
(commit 222ccf9ab838a1ca7163969fabd2cddc10403fb5) removed descriptors
cleanup function to tasklet but the completed cookie do not updated.
Thus, the DMA controller will get lots of duplicated transfer
interrupts. Just make a completed cookie update in interrupt handler.
And keep other cleanup jobs in tasklet function.
Tested-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
fsldma: Add device_prep_dma_interrupt support to fsldma.c
This is a bug that I assigned DMA_INTERRUPT capability to fsldma
but missing device_prep_dma_interrupt function. For a bug in
dmaengine.c the driver passed BUG_ON() checking. The patch fixes it.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Zhang Wei [Fri, 14 Mar 2008 00:45:28 +0000 (17:45 -0700)]
dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT.
The device->device_prep_dma_interrupt function is used by
DMA_INTERRUPT capability, not DMA_ZERO_SUM.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Zhang Wei [Thu, 13 Mar 2008 17:45:27 +0000 (10:45 -0700)]
fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.
There are warning messages reported by Stephen Rothwell with
ARCH=powerpc allmodconfig build:
drivers/dma/fsldma.c: In function 'fsl_dma_prep_memcpy':
drivers/dma/fsldma.c:439: warning: comparison of distinct pointer types
lacks a cast
drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue':
drivers/dma/fsldma.c:584: warning: format '%016llx' expects type 'long long
unsigned int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt':
drivers/dma/fsldma.c:668: warning: format '%x' expects type 'unsigned int',
but argument 5 has type 'dma_addr_t'
drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long
unsigned int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c:684: warning: format '%016llx' expects type 'long long
unsigned int', but argument 5 has type 'dma_addr_t'
drivers/dma/fsldma.c:701: warning: format '%02x' expects type 'unsigned
int', but argument 4 has type 'dma_addr_t'
drivers/dma/fsldma.c: In function 'fsl_dma_self_test':
drivers/dma/fsldma.c:840: warning: format '%d' expects type 'int', but
argument 5 has type 'size_t'
drivers/dma/fsldma.c: In function 'of_fsl_dma_probe':
drivers/dma/fsldma.c:1010: warning: format '%08x' expects type 'unsigned
int', but argument 5 has type 'resource_size_t'
This patch fixed the above warning messages.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
PCI: fix issue with busses registering multiple times in sysfs
PCI busses can be registered multiple times, so we need to detect if we
have registered our bus structure in sysfs already. If so, don't do it
again.
Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting
the problem, and to Linus for poking me to get me to believe that it was
a real problem.
The dst member nfheader_len is only used by IPv6. It's also currently
creating a rather ugly alignment hole in struct dst. Therefore this patch
moves it from there into struct rt6_info.
Above patch changes the cache line alignment, especially member
__refcnt. I did a testing by adding 2 unsigned long pading before
lastuse, so the 3 members, lastuse/__refcnt/__use, are moved to next
cache line. The performance is recovered.
I created a patch to rearrange the members in struct dst_entry.
With Eric and Valdis Kletnieks's suggestion, I made finer arrangement.
1) Move tclassid under ops in case CONFIG_NET_CLS_ROUTE=y. So
sizeof(dst_entry)=200 no matter if CONFIG_NET_CLS_ROUTE=y/n. I
tested many patches on my 16-core tigerton by moving tclassid to
different place. It looks like tclassid could also have impact on
performance. If moving tclassid before metrics, or just don't move
tclassid, the performance isn't good. So I move it behind metrics.
2) Add comments before __refcnt.
On 16-core tigerton:
If CONFIG_NET_CLS_ROUTE=y, the result with below patch is about 18%
better than the one without the patch;
If CONFIG_NET_CLS_ROUTE=n, the result with below patch is about 30%
better than the one without the patch.
With 32bit 2.6.25-rc1 on 8-core stoakley, the new patch doesn't
introduce regression.
Thank Eric, Valdis, and David!
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Acked-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Mon, 10 Mar 2008 21:29:37 +0000 (22:29 +0100)]
acer-wmi: build depends on i8042
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
projects / mirror_ubuntu-artful-kernel.git / log