Koby Elbaz [Tue, 21 Mar 2023 14:03:07 +0000 (16:03 +0200)]
accel/habanalabs: change COMMS warning messages to error level
COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.
Tal Cohen [Thu, 16 Mar 2023 15:30:46 +0000 (17:30 +0200)]
accel/habanalabs: print event type when device is disabled
When the device is in disabled state, the driver isn't suppose to
receive any events from FW. Printing the event type, as part of the
message that was already printed, shall help to get more info if this
unexpected message is received.
Koby Elbaz [Wed, 8 Mar 2023 15:53:39 +0000 (17:53 +0200)]
accel/habanalabs: unmap mapped memory when TLB inv fails
Once a memory mapping is added to the page tables, it's followed by
a TLB invalidation request which could potentially fail (HW failure).
Removing the mapping is simply a part of this failure handling routine.
TLB invalidation failure prints were updated to be more accurate.
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
Daniel Vetter [Thu, 6 Apr 2023 14:31:32 +0000 (16:31 +0200)]
Merge tag 'drm-intel-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville)
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)
Daniel Vetter [Thu, 6 Apr 2023 13:02:16 +0000 (15:02 +0200)]
Merge tag 'drm/tegra/for-6.4-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v6.4-rc1
The majority of this is minor cleanups and fixes. Other than those, this
contains Uwe's conversion to the new driver remove callback and Thomas'
fbdev DRM client conversion. The driver can now also be built on other
architectures to easy compile coverage.
Finally, this adds Mikko as a second maintainer for the driver. As a
next step we also want Tegra DRM to move into drm-misc to streamline the
maintenance process.
Jani Nikula [Wed, 5 Apr 2023 10:41:42 +0000 (13:41 +0300)]
drm/i915/wakeref: fix kernel-doc comment
Fix the warning:
drivers/gpu/drm/i915/intel_wakeref.h:118: warning: expecting prototype
for intel_wakeref_get_if_in_use(). Prototype was for
intel_wakeref_get_if_active() instead
Daniel Vetter [Thu, 6 Apr 2023 12:37:14 +0000 (14:37 +0200)]
Merge tag 'drm-misc-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
UAPI Changes:
Cross-subsystem Changes:
- Document port and rotation dt bindings better.
- For panel timing DT bindings, document that vsync and hsync are
first, rather than last in image.
- Fix video/aperture typos.
Core Changes:
- Reject prime DMA-Buf attachment if get_sg_table is missing.
(For self-importing dma-buf only.)
- Add prime import/export to vram-helper.
- Fix oops in drm/vblank when init is not called.
- Fixup xres/yres_virtual and other fixes in fb helper.
- Improve SCDC debugs.
- Skip setting deadline on modesets.
- Assorted TTM fixes.
Driver Changes:
- Add lima usage stats.
- Assorted fixes to bridge/lt8192b, tc358767, ivpu,
bridge/ti-sn65dsi83, ps8640.
- Use pci aperture helpers in drm/ast lynxfb, radeonfb.
- Revert some lima patches, as they required a commit that has been
reverted upstream.
- Add AUO NE135FBM-N41 v8.1 eDP panel.
- Add QAIC accel driver.
Daniel Vetter [Thu, 6 Apr 2023 12:21:00 +0000 (14:21 +0200)]
Merge tag 'drm-intel-gt-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- (Build-time only, should not have any impact)
drm/i915/uapi: Replace fake flex-array with flexible-array member
"Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead."
This is on core kernel request moving towards GCC 13.
Driver Changes:
- Fix context runtime accounting on sysfs fdinfo for heavy workloads (Tvrtko)
- Add support for OA media units on MTL (Umesh)
- Add new workarounds for Meteorlake (Daniele, Radhakrishna, Haridhar)
- Fix sysfs to read actual frequency for MTL and Gen6 and earlier
(Ashutosh)
- Synchronize i915/BIOS on C6 enabling on MTL (Vinay)
- Fix DMAR error noise due to GPU error capture (Andrej)
- Fix forcewake during BAR resize on discrete (Andrzej)
- Flush lmem contents after construction on discrete (Chris)
- Fix GuC loading timeout on systems where IFWI programs low boot
frequency (John)
- Fix race condition UAF in i915_perf_add_config_ioctl (Min)
- Sanitycheck MMIO access early in driver load and during forcewake
(Matt)
- Wakeref fixes for GuC RC error scenario and active VM tracking (Chris)
- Cancel HuC delayed load timer on reset (Daniele)
- Limit double GT reset to pre-MTL (Daniele)
- Use i915 instead of dev_priv insied the file_priv structure (Andi)
- Improve GuC load error reporting (John)
- Simplify VCS/BSD engine selection logic (Tvrtko)
- Perform uc late init after probe error injection (Andrzej)
- Fix format for perf_limit_reasons in debugfs (Vinay)
- Create per-gt debugfs files (Andi)
In tegra_sor_compute_config(), the 32-bit value mode->clock is
multiplied by 1000, and assigned to the u64 variable pclk. We can avoid
a potential 32-bit integer overflow by casting mode->clock to u64 before
we do the arithmetic and assignment.
Signed-off-by: Nur Hussein <hussein@unixcat.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/tegra: Implement fbdev emulation as in-kernel client
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to tegra_fbdev_setup() after tegra has registered
its DRM device. As in most drivers, tegra's fbdev emulation now
acts like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within tegra. If the fbdev
framebuffer has been fully set up, struct fb_ops.fb_destroy
implements the release. For partially initialized emulation, the
fbdev client reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/tegra: Hide fbdev support behind config option
Only build tegra's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION
has been enabled. As part of this change, move the code into its
own source file. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/ttm: Make the call to ttm_tt_populate() interruptible when faulting
When swapping in, or under memory pressure ttm_tt_populate() may sleep
for a substantiable amount of time. Allow interrupts during the sleep.
This will also allow us to inject -EINTR errors during swapin in upcoming
patches.
Also avoid returning VM_FAULT_OOM, since that will confuse the core
mm, making it print out a confused message and retrying the fault.
Return VM_FAULT_SIGBUS also under OOM conditions.
drm/ttm: Reduce the number of used allocation orders for TTM pages
When swapping out, we will split multi-order pages both in order to
move them to the swap-cache and to be able to return memory to the
swap cache as soon as possible on a page-by-page basis.
Reduce the page max order to the system PMD size, as we can then be nicer
to the system and avoid splitting gigantic pages.
Looking forward to when we might be able to swap out PMD size folios
without splitting, this will also be a benefit.
v2:
- Include all orders up to the PMD size (Christian König)
v3:
- Avoid compilation errors for architectures with special PFN_SHIFTs
When hitting an error, the error path forgot to unmap dma mappings and
could call set_pages_wb() on already uncached pages.
Fix this by introducing a common ttm_pool_free_range() function that
does the right thing.
v2:
- Simplify that common function (Christian König)
v3:
- Rename that common function to ttm_pool_free_range() (Christian König)
Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Cc: Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-2-thomas.hellstrom@linux.intel.com
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:56 +0000 (09:54 -0600)]
accel/qaic: Add qaic driver to the build system
Now that we have all the components of a minimum QAIC which can boot and
run an AIC100 device, add the infrastructure that allows the QAIC driver
to be built.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
Some of the MHI channels for an AIC100 device need to be routed to
userspace so that userspace can communicate directly with QSM. The MHI
bus does not support this, and while the WWAN subsystem does (for the same
reasons), AIC100 is not a WWAN device. Also, MHI is not something that
other accelerators are expected to share, thus an accel subsystem function
that meets this usecase is unlikely.
Create a QAIC specific MHI userspace shim that exposes these channels.
Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by
the kickstart application as documented in aic100.rst
Each AIC100 instance (currently, up to 16) in a system will create a
chardev for QAIC_SAHARA. This chardev will be found as
/dev/<mhi instance>_QAIC_SAHARA
For example - /dev/mhi0_QAIC_SAHARA
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-7-git-send-email-quic_jhugo@quicinc.com
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:54 +0000 (09:54 -0600)]
accel/qaic: Add datapath
Add the datapath component that manages BOs and submits them to running
workloads on the qaic device via the dma_bridge hardware. This allows
QAIC clients to interact with their workloads (run inferences) via the
following ioctls along with mmap():
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:53 +0000 (09:54 -0600)]
accel/qaic: Add control path
Add the control path component that talks to the management processor (QSM)
to load workloads onto the AIC100 device. This implements the KMD portion
of the NNC protocol over the QAIC_CONTROL MHI channel and the
DRM_IOCTL_QAIC_MANAGE IOCTL to userspace. With this functionality, QAIC
clients are able to load, run, and cleanup their workloads on the device
but not interact with the workloads (run inferences).
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-5-git-send-email-quic_jhugo@quicinc.com
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:52 +0000 (09:54 -0600)]
accel/qaic: Add MHI controller
An AIC100 device contains a MHI interface with a number of different
channels for controlling different aspects of the device. The MHI
controller works with the MHI bus to enable and drive that interface.
AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
expects the MHI bus to manage the process of loading and sending SBL to
the device.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-4-git-send-email-quic_jhugo@quicinc.com
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:51 +0000 (09:54 -0600)]
accel/qaic: Add uapi and core driver file
Add the QAIC driver uapi file and core driver file that binds to the PCIe
device. The core driver file also creates the accel device and manages
all the interconnections between the different parts of the driver.
The driver can be built as a module. If so, it will be called "qaic.ko".
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-3-git-send-email-quic_jhugo@quicinc.com
Jeffrey Hugo [Mon, 27 Mar 2023 15:54:50 +0000 (09:54 -0600)]
accel/qaic: Add documentation for AIC100 accelerator driver
The Qualcomm Cloud AI 100 (AIC100) device is an Artificial Intelligence
accelerator PCIe card. It contains a number of components both in the
SoC and on the card which facilitate running workloads:
QSM: management processor
NSPs: workload compute units
DMA Bridge: dedicated data mover for the workloads
MHI: multiplexed communication channels
DDR: workload storage and memory
The Linux kernel driver for AIC100 is called "QAIC" and is located in the
accel subsystem.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-2-git-send-email-quic_jhugo@quicinc.com
Daniel Vetter [Wed, 5 Apr 2023 13:31:05 +0000 (15:31 +0200)]
drm/atomic-helper: Don't set deadline for modesets
If the crtc is being switched on or off then the semantics of
computing the timestampe of the next vblank is somewhat ill-defined.
And indeed, the code splats with a warning in the timestamp
computation code. Specifically it hits the check to make sure that
atomic drivers have full set up the timing constants in the drm_vblank
structure, and that's just not the case before the crtc is actually
on.
For robustness it seems best to just not set deadlines for modesets.
v2: Also skip on inactive crtc (Ville)
Link: https://lore.kernel.org/dri-devel/dfc21f18-7e1e-48f0-c05a-d659b9c90b91@linaro.org/ Fixes: d39e48ca80c0 ("drm/atomic-helper: Set fence deadline for vblank") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # test patch only Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230405133105.947834-1-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 4 Apr 2023 19:40:38 +0000 (21:40 +0200)]
drm/fb-helper: fix input validation gaps in check_var
Apparently drivers need to check all this stuff themselves, which for
most things makes sense I guess. And for everything else we luck out,
because modern distros stopped supporting any other fbdev drivers than
drm ones and I really don't want to argue anymore about who needs to
check stuff. Therefore fixing all this just for drm fbdev emulation is
good enough.
Note that var->active is not set or validated. This is just control
flow for fbmem.c and needs to be validated in there as needed.
Daniel Vetter [Tue, 4 Apr 2023 19:40:37 +0000 (21:40 +0200)]
drm/fb-helper: drop redundant pixclock check from drm_fb_helper_set_par()
The fb_check_var hook is supposed to validate all this stuff. Any
errors from fb_set_par are considered driver/hw issues and resulting
in dmesg warnings.
Luckily we do fix up the pixclock already, so this is all fine.
Daniel Vetter [Tue, 4 Apr 2023 19:40:36 +0000 (21:40 +0200)]
drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var
Drivers are supposed to fix this up if needed if they don't outright
reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen
sizes in fb_set_var()").
Jani Nikula [Mon, 3 Apr 2023 12:24:27 +0000 (15:24 +0300)]
drm/i915: rename intel_pm.[ch] to intel_clock_gating.[ch]
Observe that intel_pm.[ch] is now purely about clock gating, so rename
them to intel_clock_gating.[ch]. Rename the functions to
intel_clock_gating_*() to follow coding conventions.
Alan Previn [Thu, 23 Mar 2023 18:41:56 +0000 (11:41 -0700)]
drm/i915/pxp: limit drm-errors or warning on firmware API failures
MESA driver is creating protected context on every driver handle
creation to query caps bits for app. So when running CI tests,
they are observing hundreds of drm_errors when enabling PXP
in .config but using SOC fusing or BIOS configuration that cannot
support PXP sessions.
The fixes tag referenced below was to resolve a related issue
where we wanted to silence error messages, but that case was due
to outdated IFWI (firmware) that definitely needed an upgrade and
was, at that point, considered a one-off case as opposed to today's
realization that default CI was enabling PXP in kernel config for
all testing.
So with this patch, let's strike a balance between issues that is
critical but are root-caused from HW/platform gaps (louder drm-warn
but just ONCE) vs other cases where it could also come from session
state machine (which cannot be a WARN_ONCE since it can be triggered
due to runtime operation events).
Let's use helpers for these so as more functions are added in future
features / HW (or as FW designers continue to bless upstreaming of
the error codes and meanings), we only need to update the helpers.
NOTE: Don't completely remove FW errors (via drm_debug) or else cusomer
apps that really needs to know that content protection failed won't
be aware of it.
v2: - Add fixes tag (Trvtko)
v3: - Break multi-line drm_dbg strings into separate drm_dbg (Daniele)
- Fix couple of typecasting nits (Daniele)
v4: - Unsuccessful PXP FW cmd due to platform configuration shouldn't
use drm_WARN_once (Tvrtko), Switched to use drm_info_once.
v5: - Added "reported-and-tested" by Eero.
Reported-and-tested-by: Eero Tamminen <eero.t.tamminen@intel.com> Fixes: b762787bf767 ("drm/i915/pxp: Use drm_dbg if arb session failed due to fw version") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323184156.4140659-1-alan.previn.teres.alexis@intel.com
Add a panel entry with delay_200_500_e50 for the AUO NE135FBM-N41
version 8.1, found on a number of ACER laptops, including the
Swift 3 (SF313-52, SF313-53), Chromebook Spin 513 (CP513-2H) and
others.
Pin-yen Lin [Fri, 31 Mar 2023 03:02:04 +0000 (11:02 +0800)]
drm/bridge: ps8640: Use constant sleep time for polling hpd
The default hpd_wait_us in panel_edp.c is 2 seconds. This makes the
sleep time in the polling of _ps8640_wait_hpd_asserted become 200ms.
Change it to a constant 20ms to speed up the function.
Marek Vasut [Mon, 3 Apr 2023 19:02:42 +0000 (21:02 +0200)]
drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packet
Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012
- REVISED OCTOBER 2020", page 22, these packets are not required.
This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN.
Chris Wilson [Fri, 31 Mar 2023 14:16:36 +0000 (16:16 +0200)]
drm/i915/gt: Hold a wakeref for the active VM
There may be a disconnect between the GT used by the engine and the GT
used for the VM, requiring us to hold a wakeref on both while the GPU is
active with this request.
Jani Nikula [Tue, 4 Apr 2023 09:05:28 +0000 (12:05 +0300)]
drm/i915: run kernel-doc on headers as part of HDRTEST
Enabling kernel-doc warnings in commit aaee4bbe8a1a ("drm/i915: enable
kernel-doc warnings for CONFIG_DRM_I915_WERROR=y") actually only covers
the .c files. And it's good for avoiding warnings in W= builds. However,
we need something more to check for kernel-doc issues in headers. Add it
as part of the existing HDRTEST.
We have tons of issues, and this unleashes warnings galore on
CONFIG_DRM_I915_WERROR=y. It doesn't fail the build because (at least
for now) we don't pass -Werror to kernel-doc.
drm: bridge: ldb: add support for using channel 1 only
The LDB driver currently checks whether dual mode is used, otherwise it
assumes only channel 0 is in use. Add support for using only channel 1. In
device tree terms, this means linking port 2 only.
Doing this cleanly requires changing the logic of the probe functions from
this:
1. use of_graph_get_remote_node() on port 1 to find the panel
2. use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode
to this:
1. use of_graph_get_remote_node() twice to find remote ports
2. reuse the result of the above to know whether each channel is enabled
and to find the panel
3. if (both channels as enabled)
use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode
Also add a dev_dbg() to log the detected mode and log an error in case no
panel was found (no channel enabled).
Karol Wachowski [Mon, 3 Apr 2023 12:15:45 +0000 (14:15 +0200)]
accel/ivpu: Remove D3hot delay for Meteorlake
VPU on MTL has hardware optimizations and does not require 10ms
D0 - D3hot transition delay imposed by PCI specification (PCIe
r6.0, sec 5.9.) .
The delay removal is traditionally done by adding PCI ID to
quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since
we do not need that optimization before driver probe and we
can better specify in the ivpu driver on what (future) hardware
use the optimization, we do not use quirk_remove_d3hot_delay()
for that.
Diogo Ivo [Mon, 28 Nov 2022 16:28:49 +0000 (16:28 +0000)]
drm/tegra: dsi: Clear enable register if powered by bootloader
In cases where the DSI module is left on by the bootloader
some panels may fail to initialize if the enable register is not cleared
before the panel's initialization sequence is sent, so clear it if that
is the case.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com>
Cai Huoqing [Thu, 16 Sep 2021 07:37:21 +0000 (15:37 +0800)]
drm/tegra: plane: Improve use of dev_err_probe()
Return dev_err_probe() directly, because the return value of
dev_err_probe() is the appropriate error code, and it can
reduce code size, simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Cai Huoqing [Thu, 16 Sep 2021 10:56:40 +0000 (18:56 +0800)]
drm/tegra: dsi: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Cai Huoqing [Fri, 17 Sep 2021 02:07:41 +0000 (10:07 +0800)]
drm/tegra: sor: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Deepak R Varma [Wed, 1 Mar 2023 19:48:06 +0000 (01:18 +0530)]
drm/tegra: sor: Remove redundant error logging
A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.
Issue identified using platform_get_irq.cocci coccicheck script.
Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Lee Jones [Fri, 17 Mar 2023 08:16:50 +0000 (08:16 +0000)]
drm/tegra: dc: Remove set but unused variable 'state'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/tegra/dc.c: In function ‘tegra_crtc_calculate_memory_bandwidth’:
drivers/gpu/drm/tegra/dc.c:2384:38: warning: variable ‘old_state’ set but not used [-Wunused-but-set-variable]
Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:23 +0000 (18:02 +0100)]
drm/tegra: vic: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:22 +0000 (18:02 +0100)]
drm/tegra: sor: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:21 +0000 (18:02 +0100)]
drm/tegra: nvdec: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:20 +0000 (18:02 +0100)]
drm/tegra: hub: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:19 +0000 (18:02 +0100)]
drm/tegra: hdmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:18 +0000 (18:02 +0100)]
drm/tegra: gr3d: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:17 +0000 (18:02 +0100)]
drm/tegra: gr2d: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:16 +0000 (18:02 +0100)]
drm/tegra: dsi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:15 +0000 (18:02 +0100)]
drm/tegra: dpaux: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Wed, 22 Mar 2023 17:02:14 +0000 (18:02 +0100)]
drm/tegra: dc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Yang Yingliang [Sat, 26 Nov 2022 07:33:15 +0000 (15:33 +0800)]
gpu: host1x: Fix memory leak of device names
The device names allocated by dev_set_name() need be freed
before module unloading, but they can not be freed because
the kobject's refcount which was set in device_initialize()
has not be decreased to 0.
As comment of device_add() says, if it fails, use only
put_device() drop the refcount, then the name will be
freed in kobejct_cleanup().
device_del() and put_device() can be replaced with
device_unregister(), so call it to unregister the added
successfully devices, and just call put_device() to the
not added device.
Add a release() function to device to avoid null release()
function WARNING in device_release(), it's empty, because
the context devices are freed together in
host1x_memory_context_list_free().
Yang Yingliang [Sat, 26 Nov 2022 07:33:14 +0000 (15:33 +0800)]
gpu: host1x: Fix potential double free if IOMMU is disabled
If context device has no IOMMU, the 'cdl->devs' is freed in
error path, but host1x_memory_context_list_init() doesn't
return an error code, so the module can be loaded successfully,
when it's unloading, the host1x_memory_context_list_free() is
called in host1x_remove(), it will cause double free. Set the
'cdl->devs' to NULL after freeing it to avoid double free.
Ye Xingchen [Wed, 8 Feb 2023 07:41:56 +0000 (15:41 +0800)]
gpu: host1x: mipi: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Thierry Reding <treding@nvidia.com>
Mikko Perttunen [Wed, 1 Mar 2023 13:51:06 +0000 (15:51 +0200)]
gpu: host1x: Don't rely on dma_fence_wait_timeout return value
dma_fence_wait_timeout (along with a host of other jiffies-based
timeouting functions) returns zero both in case of timeout and when
the wait completes during the last jiffy before timeout. As such,
we can't rely on it to distinguish between success and timeout.
To prevent confusing callers by returning -EAGAIN before the timeout
period has elapsed, check if the fence got signaled again after
the wait.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Ville Syrjälä [Wed, 29 Mar 2023 17:24:33 +0000 (20:24 +0300)]
drm/i915: Fix fast wake AUX sync len
Fast wake should use 8 SYNC pulses for the preamble
and 10-16 SYNC pulses for the precharge. Reduce our
fast wake SYNC count to match the maximum value.
We also use the maximum precharge length for normal
AUX transactions.
Ashutosh Dixit [Sat, 1 Apr 2023 02:41:46 +0000 (19:41 -0700)]
drm/i915/hwmon: Use 0 to designate disabled PL1 power limit
On ATSM the PL1 limit is disabled at power up. The previous uapi assumed
that the PL1 limit is always enabled and therefore did not have a notion of
a disabled PL1 limit. This results in erroneous PL1 limit values when the
PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit
was previously shown as 0 which means a low PL1 limit whereas the limit
being disabled actually implies a high effective PL1 limit value.
To get round this problem, the PL1 limit uapi is expanded to include a
special value 0 to designate a disabled PL1 limit. A read value of 0 means
that the PL1 power limit is disabled, writing 0 disables the limit.
The link between this patch and the bugs mentioned below is as follows:
* Because on ATSM the PL1 power limit is disabled on power up and there
were no means to enable it, we previously implemented the means to
enable the limit when the PL1 hwmon entry (power1_max) was written to.
* Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value
from all hwmon sysfs (b) does a bunch of random writes and finally (c)
restores the orig value read. On ATSM since the orig value is 0, when
the IGT restores the 0 value, the PL1 limit is now enabled with a value
of 0.
* PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to
100 MHz. This causes GuC FW load and several IGT's to start timing out
and gives rise to these Intel CI bugs. After this patch, writing 0 would
disable the PL1 limit instead of enabling it, avoiding the freq drop
issue.
v2: Add explanation for bugs mentioned below (Rodrigo)
v3: Eliminate race during PL1 disable and verify (Tvrtko)
Change return to -ENODEV if verify fails (Tvrtko)
Lee Jones [Fri, 31 Mar 2023 09:26:04 +0000 (10:26 +0100)]
drm/i915/i915_vma: Provide one missing param and demote another non-kerneldoc header
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/i915_vma.c:756: warning: Function parameter or member 'ww' not described in 'i915_vma_insert'
drivers/gpu/drm/i915/i915_vma.c:1744: warning: Function parameter or member 'vma' not described in 'i915_vma_destroy_locked'
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-17-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:26:03 +0000 (10:26 +0100)]
drm/i915/gt/uc/intel_guc_hwconfig: Demote a few non-conforming kerneldoc headers
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: Function parameter or member 'gt' not described in 'guc_hwconfig_init'
drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: expecting prototype for intel_guc_hwconfig_init(). Prototype was for guc_hwconfig_init() instead
drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:145: warning: Function parameter or member 'gt' not described in 'intel_gt_init_hwconfig'
drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:158: warning: Function parameter or member 'gt' not described in 'intel_gt_fini_hwconfig'
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-16-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:26:02 +0000 (10:26 +0100)]
drm/i915/i915_gem: Provide function names to complete the expected kerneldoc format
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/i915_gem.c:447: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/i915_gem.c:536: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/i915_gem.c:726: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/i915_gem.c:811: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[Jani: fix i915_gem_sw_finish_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-15-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:26:00 +0000 (10:26 +0100)]
drm/i915/gem/i915_gem_wait: Provide function name to validate the kerneldoc header
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_wait.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-13-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:25:59 +0000 (10:25 +0100)]
drm/i915/gem/i915_gem_ttm_move: Provide a couple of missing descriptions for 'num_pages' and 'ctx'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:272: warning: Function parameter or member 'num_pages' not described in 'i915_ttm_memcpy_arg'
drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:569: warning: Function parameter or member 'ctx' not described in 'i915_ttm_move'
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-12-lee@kernel.org
Hopefully someone knowledgable will follow-up to complete it.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'offset' not described in '__i915_gem_ttm_object_init'
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'page_size' not described in '__i915_gem_ttm_object_init'
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-11-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:25:57 +0000 (10:25 +0100)]
drm/i915/gem/i915_gem_ttm_pm: Provide a couple of missing descriptions for 'flags' and remove some superfluous ones
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Function parameter or member 'flags' not described in 'i915_ttm_backup_region'
drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_backup_region'
drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'backup_pinned' description in 'i915_ttm_backup_region'
drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Function parameter or member 'flags' not described in 'i915_ttm_restore_region'
drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_restore_region'
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-10-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:25:56 +0000 (10:25 +0100)]
drm/i915/gem/i915_gem_domain: Provide function names to complete proper kerneldoc
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_domain.c:119: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/gem/i915_gem_domain.c:180: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/gem/i915_gem_domain.c:265: warning: expecting prototype for Changes the cache(). Prototype was for i915_gem_object_set_cache_level() instead
drivers/gpu/drm/i915/gem/i915_gem_domain.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/gem/i915_gem_domain.c:514: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-9-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:25:55 +0000 (10:25 +0100)]
drm/i915/gem/i915_gem_create: Provide the function names for proper kerneldoc headers
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gem/i915_gem_create.c:147: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/gem/i915_gem_create.c:218: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/i915/gem/i915_gem_create.c:402: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[Jani: fixed i915_gem_create_ext_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-8-lee@kernel.org
Lee Jones [Fri, 31 Mar 2023 09:25:54 +0000 (10:25 +0100)]
drm/i915/gt/intel_rps: Demote a kerneldoc abuse for ips_ping_for_i915_load()
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/gt/intel_rps.c:2646: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-7-lee@kernel.org
projects / mirror_ubuntu-kernels.git / log