Zixuan Fu [Sat, 14 May 2022 05:06:56 +0000 (13:06 +0800)]
net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is
freed immediately. Similarly, in another branch, when dma_map_page() fails,
rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf()
returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all()
-> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls
vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page
are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs.
To fix these possible bugs, rbi->skb and rbi->page should be cleared after
they are freed.
The error log in our fault-injection testing is shown as follows:
Xin Long [Mon, 16 May 2022 01:37:27 +0000 (21:37 -0400)]
xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdown
The global blackhole_netdev has replaced pernet loopback_dev to become the
one given to the object that holds an netdev when ifdown in many places of
ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use
blackhole_netdev to invalidate dst entries").
Especially after commit faab39f63c1f ("net: allow out-of-order netdev
unregistration"), it's no longer safe to use loopback_dev that may be
freed before other netdev.
This patch is to set dst dev to blackhole_netdev instead of loopback_dev
in ifdown.
Horatiu Vultur [Fri, 13 May 2022 18:00:30 +0000 (20:00 +0200)]
net: lan966x: Fix assignment of the MAC address
The following two scenarios were failing for lan966x.
1. If the port had the address X and then trying to assign the same
address, then the HW was just removing this address because first it
tries to learn new address and then delete the old one. As they are
the same the HW remove it.
2. If the port eth0 was assigned the same address as one of the other
ports eth1 then when assigning back the address to eth0 then the HW
was deleting the address of eth1.
The case 1. is fixed by checking if the port has already the same
address while case 2. is fixed by checking if the address is used by any
other port.
Jonathan Lemon [Fri, 13 May 2022 22:52:31 +0000 (15:52 -0700)]
ptp: ocp: have adjtime handle negative delta_ns correctly
delta_ns is a s64, but it was being passed ptp_ocp_adjtime_coarse
as an u64. Also, it turns out that timespec64_add_ns() only handles
positive values, so perform the math with set_normalized_timespec().
Fixes: 90f8f4c0e3ce ("ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments") Suggested-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/20220513225231.1412-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'shift' field is not validated, and any value above 31 will
trigger out-of-bounds. The issue predates the git history, but
syzbot was able to trigger it only after the commit mentioned in
the fixes tag, and this change only applies on top of such commit.
Address the issue bounding the 'shift' value to the maximum allowed
by the relevant operator.
Reported-and-tested-by: syzbot+8ed8fc4c57e9dcf23ca6@syzkaller.appspotmail.com Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 08:39:37 +0000 (09:39 +0100)]
Merge tag 'linux-can-fixes-for-5.18-20220514' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-05-14
this is a pull request of 2 patches for net/master.
Changes to linux-can-fixes-for-5.18-20220513:
- adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake""
(Thanks Jakub)
Both patches are by Jarkko Nikula, target the m_can PCI driver
bindings, and fix usage of wrong bit timing constants for the Elkhart
Lake platform.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarkko Nikula [Thu, 12 May 2022 12:41:44 +0000 (15:41 +0300)]
can: m_can: remove support for custom bit timing, take #2
Now when Intel Elkhart Lake uses again common bit timing and there are
no other users for custom bit timing, we can bring back the changes
done by the commit 0ddd83fbebbc ("can: m_can: remove support for
custom bit timing").
This effectively reverts commit ea768b2ffec6 ("Revert "can: m_can:
remove support for custom bit timing"") while taking into account
commit ea22ba40debe ("can: m_can: make custom bittiming fields const")
and commit 7d4a101c0bd3 ("can: dev: add sanity check in
can_set_static_ctrlmode()").
Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for
Elkhart Lake") broke the test case using bitrate switching.
| ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on
| ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on
| candump can0 &
| cangen can1 -I 0x800 -L 64 -e -fb \
| -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v
Above commit does everything correctly according to the datasheet.
However datasheet wasn't correct.
I got confirmation from hardware engineers that the actual CAN
hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0.
Datasheet was mirroring values from an another specification which was
based on earlier M_CAN version leading to wrong bit timings.
Therefore revert the commit and switch back to common bit timings.
Fixes: ea4c1787685d ("can: m_can: pci: use custom bit timings for Elkhart Lake") Link: https://lore.kernel.org/all/20220512124144.536850-1-jarkko.nikula@linux.intel.com Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Chee Hou Ong <chee.houx.ong@intel.com> Reported-by: Aman Kumar <aman.kumar@intel.com> Reported-by: Pallavi Kumari <kumari.pallavi@intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Harini Katakam [Thu, 12 May 2022 17:19:00 +0000 (22:49 +0530)]
net: macb: Increment rx bd head after allocating skb and buffer
In gem_rx_refill rx_prepared_head is incremented at the beginning of
the while loop preparing the skb and data buffers. If the skb or data
buffer allocation fails, this BD will be unusable BDs until the head
loops back to the same BD (and obviously buffer allocation succeeds).
In the unlikely event that there's a string of allocation failures,
there will be an equal number of unusable BDs and an inconsistent RX
BD chain. Hence increment the head at the end of the while loop to be
clean.
This series contains a bug fix affecting the in-kernel path manager
(patch 1), where closing subflows would sometimes not adjust the PM's
count of active subflows. Patch 2 updates the selftests to exercise the
new code.
====================
Paolo Abeni [Thu, 12 May 2022 23:26:41 +0000 (16:26 -0700)]
mptcp: fix subflow accounting on close
If the PM closes a fully established MPJ subflow or the subflow
creation errors out in it's early stage the subflows counter is
not bumped accordingly.
This change adds the missing accounting, additionally taking care
of updating accordingly the 'accept_subflow' flag.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Leonard pointed out, a newly allocated netns can happen
to reuse a freed 'struct net'.
While TCP TW timers were covered by my patches, other things were not:
1) Lookups in rx path (INET_MATCH() and INET6_MATCH()), as they look
at 4-tuple plus the 'struct net' pointer.
2) /proc/net/tcp[6] and inet_diag, same reason.
3) hashinfo->bhash[], same reason.
Fixing all this seems risky, lets instead revert.
In the future, we might have a per netns tcp hash table, or
a per netns list of timewait sockets...
Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Leonard Crestez <cdleonard@gmail.com> Tested-by: Leonard Crestez <cdleonard@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 May 2022 15:10:33 +0000 (10:10 -0500)]
net: ipa: get rid of a duplicate initialization
In ipa_qmi_ready(), the "ipa" local variable is set when
initialized, but then set again just before it's first used.
One or the other is enough, so get rid of the first one.
References: https://lore.kernel.org/lkml/200de1bd-0f01-c334-ca18-43eed783dfac@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 May 2022 15:10:32 +0000 (10:10 -0500)]
net: ipa: record proper RX transaction count
Each time we are notified that some number of transactions on an RX
channel has completed, we record the number of bytes that have been
transferred since the previous notification. We also track the
number of transactions completed, but that is not currently being
calculated correctly; we're currently counting the number of such
notifications, but each notification can represent many transaction
completions. Fix this.
Fixes: 650d1603825d8 ("soc: qcom: ipa: the generic software interface") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Thu, 12 May 2022 15:10:31 +0000 (10:10 -0500)]
net: ipa: certain dropped packets aren't accounted for
If an RX endpoint receives packets containing status headers, and a
packet in the buffer is not dropped, ipa_endpoint_skb_copy() is
responsible for wrapping the packet data in an SKB and forwarding it
to ipa_modem_skb_rx() for further processing.
If ipa_endpoint_skb_copy() gets a null pointer from build_skb(), it
just returns early. But in the process it doesn't record that as a
dropped packet in the network device statistics.
Instead, call ipa_modem_skb_rx() whether or not the SKB pointer is
NULL; that function ensures the statistics are properly updated.
Fixes: 1b65bbcc9a710 ("net: ipa: skip SKB copy if no netdev") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)"
* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
mlxsw: Avoid warning during ip6gre device removal
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
net: phy: micrel: Fix incorrect variable type in micrel
decnet: Use container_of() for struct dn_neigh casts
...
Linus Torvalds [Thu, 12 May 2022 17:42:56 +0000 (10:42 -0700)]
Merge branch 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Waiman's fix for a cgroup2 cpuset bug where it could miss nodes which
were hot-added"
* 'for-5.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
Linus Torvalds [Thu, 12 May 2022 17:21:44 +0000 (10:21 -0700)]
Merge tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs fixes from Jan Kara:
"Three fixes that I'd still like to get to 5.18:
- add a missing sanity check in the fanotify FAN_RENAME feature
(added in 5.17, let's fix it before it gets wider usage in
userspace)
- udf fix for recently introduced filesystem corruption issue
- writeback fix for a race in inode list handling that can lead to
delayed writeback and possible dirty throttling stalls"
* tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Avoid using stale lengthOfImpUse
writeback: Avoid skipping inode writeback
fanotify: do not allow setting dirent events in mask of non-dir
The commit cited below claims to fix a use-after-free condition after
tls_device_down. Apparently, the description wasn't fully accurate. The
context stayed alive, but ctx->netdev became NULL, and the offload was
torn down without a proper fallback, so a bug was present, but a
different kind of bug.
Due to misunderstanding of the issue, the original patch dropped the
refcount_dec_and_test line for the context to avoid the alleged
premature deallocation. That line has to be restored, because it matches
the refcount_inc_not_zero from the same function, otherwise the contexts
that survived tls_device_down are leaked.
This patch fixes the described issue by restoring refcount_dec_and_test.
After this change, there is no leak anymore, and the fallback to
software kTLS still works.
Fixes: c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220512091830.678684-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Thu, 12 May 2022 05:47:09 +0000 (05:47 +0000)]
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().
Guangguan Wang [Thu, 12 May 2022 03:08:20 +0000 (11:08 +0800)]
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.
Fixes: 846e344eb722 ("net/smc: add receive timeout check") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Thu, 12 May 2022 02:17:31 +0000 (19:17 -0700)]
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
After commit 2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of
state->link") the interface suspend path would call our mac_link_down()
call back which would forcibly set the link down, thus preventing
Wake-on-LAN packets from reaching our management port.
Fix this by looking at whether the port is enabled for Wake-on-LAN and
not clearing the link status in that case to let packets go through.
Amit Cohen [Wed, 11 May 2022 11:57:47 +0000 (14:57 +0300)]
mlxsw: Avoid warning during ip6gre device removal
IPv6 addresses which are used for tunnels are stored in a hash table
with reference counting. When a new GRE tunnel is configured, the driver
is notified and configures it in hardware.
Currently, any change in the tunnel is not applied in the driver. It
means that if the remote address is changed, the driver is not aware of
this change and the first address will be used.
This behavior results in a warning [1] in scenarios such as the
following:
# ip link add name gre1 type ip6gre local 2000::3 remote 2000::fffe tos inherit ttl inherit
# ip link set name gre1 type ip6gre local 2000::3 remote 2000::ffff ttl inherit
# ip link delete gre1
The change of the address is not applied in the driver. Currently, the
driver uses the remote address which is stored in the 'parms' of the
overlay device. When the tunnel is removed, the new IPv6 address is
used, the driver tries to release it, but as it is not aware of the
change, this address is not configured and it warns about releasing non
existing IPv6 address.
Fix it by using the IPv6 address which is cached in the IPIP entry, this
address is the last one that the driver used, so even in cases such the
above, the first address will be released, without any warning.
Florian Fainelli [Wed, 11 May 2022 03:17:51 +0000 (20:17 -0700)]
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
The interrupt controller supplying the Wake-on-LAN interrupt line maybe
modular on some platforms (irq-bcm7038-l1.c) and might be probed at a
later time than the GENET driver. We need to specifically check for
-EPROBE_DEFER and propagate that error to ensure that we eventually
fetch the interrupt descriptor.
Fixes: 9deb48b53e7f ("bcmgenet: add WOL IRQ check") Fixes: 5b1f0e62941b ("net: bcmgenet: Avoid touching non-existent interrupt") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220511031752.2245566-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yang Yingliang [Wed, 11 May 2022 03:08:29 +0000 (11:08 +0800)]
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
'foe_table' is a pointer, the real size of struct mtk_foe_entry
should be pass to memset().
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220511030829.3308094-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 12 May 2022 00:40:39 +0000 (17:40 -0700)]
Merge tag 'for-net-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix the creation of hdev->name when index is greater than 9999
* tag 'for-net-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix the creation of hdev->name
====================
Jakub Kicinski [Thu, 12 May 2022 00:33:01 +0000 (17:33 -0700)]
Merge tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
Second set of fixes for v5.18 and hopefully the last one. We have a
new iwlwifi maintainer, a fix to rfkill ioctl interface and important
fixes to both stack and two drivers.
* tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
nl80211: fix locking in nl80211_set_tx_bitrate_mask()
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
mac80211_hwsim: fix RCU protected chanctx access
mailmap: update Kalle Valo's email
mac80211: Reset MBSSID parameters upon connection
cfg80211: retrieve S1G operating channel number
nl80211: validate S1G channel width
mac80211: fix rx reordering with non explicit / psmp ack policy
ath11k: reduce the wait time of 11d scan and hw scan while add interface
MAINTAINERS: update iwlwifi driver maintainer
iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
====================
Itay Iellin [Sat, 7 May 2022 12:32:48 +0000 (08:32 -0400)]
Bluetooth: Fix the creation of hdev->name
Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.
Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Xiaomeng Tong [Tue, 10 May 2022 20:48:46 +0000 (13:48 -0700)]
i40e: i40e_main: fix a missing check on list iterator
The bug is here:
ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err);
The list iterator 'ch' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.
To fix this bug, use a new variable 'iter' as the list iterator,
while use the origin variable 'ch' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org Fixes: 1d8d80b4e4ff6 ("i40e: Add macvlan support on i40e") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 10 May 2022 14:57:34 +0000 (16:57 +0200)]
net/sched: act_pedit: really ensure the skb is writable
Currently pedit tries to ensure that the accessed skb offset
is writable via skb_unclone(). The action potentially allows
touching any skb bytes, so it may end-up modifying shared data.
The above causes some sporadic MPTCP self-test failures, due to
this code:
The above modifies a data byte outside the skb head and the skb is
a cloned one, carrying a TCP output packet.
This change addresses the issue by keeping track of a rough
over-estimate highest skb offset accessed by the action and ensuring
such offset is really writable.
Note that this may cause performance regressions in some scenarios,
but hopefully pedit is not in the critical path.
Fixes: db2c24175d14 ("act_pedit: access skb->data safely") Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 11 May 2022 11:31:01 +0000 (12:31 +0100)]
Merge branch 's390-net-fixes'
Alexandra Winter says:
====================
s390/net: Cleanup some code checker findings
clean up smatch findings in legacy code. I was not able to provoke
any real failures on my systems, but other hardware reactions,
timing conditions or compiler output, may cause failures.
There are still 2 smatch warnings left in s390/net:
drivers/s390/net/ctcm_main.c:1326 add_channel() warn: missing error code 'rc'
This one is a false positive.
drivers/s390/net/netiucv.c:1355 netiucv_check_user() warn: argument 3 to %02x specifier has type 'char'
Postponing this one, need to better understand string handling in iucv.
There are several sparse warnings left in ctcm, like:
drivers/s390/net/ctcm_fsms.c:573:9: warning: context imbalance in 'ctcm_chx_setmode' - different lock contexts for basic block
Those are mentioned in the source, no plan to rework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:08 +0000 (09:05 +0200)]
s390/lcs: fix variable dereferenced before check
smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)
Fixes: 27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:07 +0000 (09:05 +0200)]
s390/ctcm: fix potential memory leak
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 10 May 2022 07:05:06 +0000 (09:05 +0200)]
s390/ctcm: fix variable dereferenced before check
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 May 2022 11:25:07 +0000 (12:25 +0100)]
Merge branch 'atlantic-fixes'
Grant Grundler says:
====================
net: atlantic: more fuzzing fixes
It essentially describes four problems:
1) validate rxd_wb->next_desc_ptr before populating buff->next
2) "frag[0] not initialized" case in aq_ring_rx_clean()
3) limit iterations handling fragments in aq_ring_rx_clean()
4) validate hw_head_ in hw_atl_b0_hw_ring_tx_head_update()
(1) was fixed by Zekun Shen <bruceshenzk@gmail.com> around the same time with
"atlantic: Fix buff_ring OOB in aq_ring_rx_clean" (SHA1 5f50153288452e10).
I've added one "clean up" contribution:
"net: atlantic: reduce scope of is_rsc_complete"
I tested the "original" patches using chromeos-v5.4 kernel branch:
https://chromium-review.googlesource.com/q/hashtag:pcinet-atlantic-2022q1+(status:open%20OR%20status:merged)
I've forward ported those patches to 5.18-rc2 and compiled them but am
unable to test them on 5.18-rc2 kernel (logistics problems).
Credit largely goes to ChromeOS Fuzzing team members:
Aashay Shringarpure, Yi Chou, Shervin Oloumi
V2 changes:
o drop first patch - was already fixed upstream differently
o reduce (4) "validate hw_head_" to simple bounds checking.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:26 +0000 (19:28 -0700)]
net: atlantic: verify hw_head_ lies within TX buffer ring
Bounds check hw_head index provided by NIC to verify it lies
within the TX buffer ring.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:25 +0000 (19:28 -0700)]
net: atlantic: add check for MAX_SKB_FRAGS
Enforce that the CPU can not get stuck in an infinite loop.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler [Tue, 10 May 2022 02:28:23 +0000 (19:28 -0700)]
net: atlantic: fix "frag[0] not initialized"
In aq_ring_rx_clean(), if buff->is_eop is not set AND
buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to
buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called.
The loop following this code starts calling skb_add_rx_frag() starting
with i=1 and thus frag[0] is never initialized. Since i is initialized
to zero at the top of the primary loop, we can just reference and
post-increment i instead of hardcoding the 0 when calling
skb_add_rx_frag() the first time.
Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wan Jiabing [Mon, 9 May 2022 14:45:19 +0000 (22:45 +0800)]
net: phy: micrel: Fix incorrect variable type in micrel
In lanphy_read_page_reg, calling __phy_read() might return a negative
error code. Use 'int' to check the error code.
Fixes: 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jan Kara [Tue, 10 May 2022 10:36:04 +0000 (12:36 +0200)]
udf: Avoid using stale lengthOfImpUse
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 979a6e28dd96 ("udf: Get rid of 0-length arrays in struct fileIdentDesc") Signed-off-by: Jan Kara <jack@suse.cz>
Jing Xia [Tue, 10 May 2022 02:35:14 +0000 (10:35 +0800)]
writeback: Avoid skipping inode writeback
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: stable@vger.kernel.org Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
Manuel Ullmann [Wed, 4 May 2022 19:30:44 +0000 (21:30 +0200)]
net: atlantic: always deep reset on pm op, fixing up my null deref regression
The impact of this regression is the same for resume that I saw on
thaw: the kernel hangs and nothing except SysRq rebooting can be done.
Fixes regression in commit cbe6c3a8f8f4 ("net: atlantic: invert deep
par in pm functions, preventing null derefs"), where I disabled deep
pm resets in suspend and resume, trying to make sense of the
atl_resume_common() deep parameter in the first place.
It turns out, that atlantic always has to deep reset on pm
operations. Even though I expected that and tested resume, I screwed
up by kexec-rebooting into an unpatched kernel, thus missing the
breakage.
This fixup obsoletes the deep parameter of atl_resume_common, but I
leave the cleanup for the maintainers to post to mainline.
Suspend and hibernation were successfully tested by the reporters.
Jakub Kicinski [Tue, 10 May 2022 01:16:46 +0000 (18:16 -0700)]
Merge tag 'batadv-net-pullrequest-20220508' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Don't skb_split skbuffs with frag_list, by Sven Eckelmann
* tag 'batadv-net-pullrequest-20220508' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't skb_split skbuffs with frag_list
====================
Vladimir Oltean [Sat, 7 May 2022 13:45:50 +0000 (16:45 +0300)]
net: dsa: flush switchdev workqueue on bridge join error path
There is a race between switchdev_bridge_port_offload() and the
dsa_port_switchdev_sync_attrs() call right below it.
When switchdev_bridge_port_offload() finishes, FDB entries have been
replayed by the bridge, but are scheduled for deferred execution later.
However dsa_port_switchdev_sync_attrs -> dsa_port_can_apply_vlan_filtering()
may impose restrictions on the vlan_filtering attribute and refuse
offloading.
When this happens, the delayed FDB entries will dereference dp->bridge,
which is a NULL pointer because we have stopped the process of
offloading this bridge.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
pc : dsa_port_bridge_host_fdb_del+0x64/0x100
lr : dsa_slave_switchdev_event_work+0x130/0x1bc
Call trace:
dsa_port_bridge_host_fdb_del+0x64/0x100
dsa_slave_switchdev_event_work+0x130/0x1bc
process_one_work+0x294/0x670
worker_thread+0x80/0x460
---[ end trace 0000000000000000 ]---
Error: dsa_core: Must first remove VLAN uppers having VIDs also present in bridge.
Fix the bug by doing what we do on the normal bridge leave path as well,
which is to wait until the deferred FDB entries complete executing, then
exit.
The placement of dsa_flush_workqueue() after switchdev_bridge_port_unoffload()
guarantees that both the FDB additions and deletions on rollback are waited for.
Jakub Kicinski [Tue, 10 May 2022 00:54:26 +0000 (17:54 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-05-06
This series contains updates to ice driver only.
Ivan Vecera fixes a race with aux plug/unplug by delaying setting adev
until initialization is complete and adding locking.
Anatolii ensures VF queues are completely disabled before attempting to
reconfigure them.
Michal ensures stale Tx timestamps are cleared from hardware.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP stale Tx timestamps cleanup
ice: clear stale Tx queue settings before configuring
ice: Fix race during aux device (un)plugging
====================
net: phy: Fix race condition on link status change
This fixes the following error caused by a race condition between
phydev->adjust_link() and a MDIO transaction in the phy interrupt
handler. The issue was reproduced with the ethernet FEC driver and a
micrel KSZ9031 phy.
[ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout
[ 146.201779] ------------[ cut here ]------------
[ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c
[ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug
[ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9
[ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 146.236257] unwind_backtrace from show_stack+0x10/0x14
[ 146.241640] show_stack from dump_stack_lvl+0x58/0x70
[ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c
[ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4
[ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c
[ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48
[ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78
[ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc
[ 146.279605] irq_thread from kthread+0xe4/0x104
[ 146.284267] kthread from ret_from_fork+0x14/0x28
[ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8)
[ 146.294448] 1fa0: 00000000000000000000000000000000
[ 146.302842] 1fc0: 0000000000000000000000000000000000000000000000000000000000000000
[ 146.311281] 1fe0: 000000000000000000000000000000000000001300000000
[ 146.318262] irq event stamp: 12325
[ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60
[ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60
[ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624
[ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178
[ 146.354447] ---[ end trace 0000000000000000 ]---
With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link()
calls fec_stop()/fec_restart() and both these function reset and
temporary disable the FEC disrupting any MII transaction that
could be happening at the same time.
fec_enet_adjust_link() and phy_read() can be running at the same time
when we have one additional interrupt before the phy_state_machine() is
able to terminate.
The W=2 build pointed out that the code wasn't initializing all the
variables in the dim_cq_moder declarations with the struct initializers.
The net change here is zero since these structs were already static
const globals and were initialized with zeros by the compiler, but
removing compiler warnings has value in and of itself.
lib/dim/net_dim.c: At top level:
lib/dim/net_dim.c:54:9: warning: missing initializer for field ‘comps’ of ‘const struct dim_cq_moder’ [-Wmissing-field-initializers]
54 | NET_DIM_RX_EQE_PROFILES,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from lib/dim/net_dim.c:6:
./include/linux/dim.h:45:13: note: ‘comps’ declared here
45 | u16 comps;
| ^~~~~
and repeats for the tx struct, and once you fix the comps entry then
the cq_period_mode field needs the same treatment.
Use the commonly accepted style to indicate to the compiler that we
know what we're doing, and add a comma at the end of each struct
initializer to clean up the issue, and use explicit initializers
for the fields we are initializing which makes the compiler happy.
While here and fixing these lines, clean up the code slightly with
a fix for the super long lines by removing the word "_MODERATION" from a
couple defines only used in this file.
Jonathan Lemon [Fri, 6 May 2022 22:37:39 +0000 (15:37 -0700)]
ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.
The initial code used roundup() to round the starting time to
a multiple of a period. This generated an error on 32-bit
systems, so was replaced with DIV_ROUND_UP_ULL().
However, this truncates to 32-bits on a 64-bit system. Replace
with DIV64_U64_ROUND_UP() instead.
Linus Torvalds [Mon, 9 May 2022 15:48:59 +0000 (08:48 -0700)]
Merge tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi AMD suspend/resume + fan detection fixes
- two other small fixes
- one hardware-id addition
* tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Fix initialization order when compiling as builtin module
platform/surface: gpe: Add support for Surface Pro 8
platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
platform/x86: thinkpad_acpi: Correct dual fan probe
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks
The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit 54f586a91532 ("rfkill: make new event layout opt-in") is unusable
since it is based on RFKILL_IOC_EXT_SIZE which has not been defined.
Fix that by replacing the undefined constant with the constant which
is intended to be used in this definition.
Fixes: 54f586a91532 ("rfkill: make new event layout opt-in") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org
[add commit message provided later by Dmitry] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 5 May 2022 21:04:22 +0000 (23:04 +0200)]
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
This is needed since it might use (and pass out) pointers to
e.g. keys protected by RCU. Can't really happen here as the
frames aren't encrypted, but we need to still adhere to the
rules.
Amir Goldstein [Sat, 7 May 2022 08:00:28 +0000 (11:00 +0300)]
fanotify: do not allow setting dirent events in mask of non-dir
Dirent events (create/delete/move) are only reported on watched
directory inodes, but in fanotify as well as in legacy inotify, it was
always allowed to set them on non-dir inode, which does not result in
any meaningful outcome.
Until kernel v5.17, dirent events in fanotify also differed from events
"on child" (e.g. FAN_OPEN) in the information provided in the event.
For example, FAN_OPEN could be set in the mask of a non-dir or the mask
of its parent and event would report the fid of the child regardless of
the marked object.
By contrast, FAN_DELETE is not reported if the child is marked and the
child fid was not reported in the events.
Since kernel v5.17, with fanotify group flag FAN_REPORT_TARGET_FID, the
fid of the child is reported with dirent events, like events "on child",
which may create confusion for users expecting the same behavior as
events "on child" when setting events in the mask on a child.
The desired semantics of setting dirent events in the mask of a child
are not clear, so for now, deny this action for a group initialized
with flag FAN_REPORT_TARGET_FID and for the new event FAN_RENAME.
We may relax this restriction in the future if we decide on the
semantics and implement them.
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used,
check if udp packets and tcp packets are successfully delivered to user
space. If wrong udp packets are delivered, udpgso_bench_rx will exit
with "Initial byte out of range"
Signed-off-by: Maciej enczykowski <maze@google.com> Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lina Wang [Thu, 5 May 2022 05:48:49 +0000 (13:48 +0800)]
net: fix wrong network header length
When clatd starts with ebpf offloaing, and NETIF_F_GRO_FRAGLIST is enable,
several skbs are gathered in skb_shinfo(skb)->frag_list. The first skb's
ipv6 header will be changed to ipv4 after bpf_skb_proto_6_to_4,
network_header\transport_header\mac_header have been updated as ipv4 acts,
but other skbs in frag_list didnot update anything, just ipv6 packets.
udp_queue_rcv_skb will call skb_segment_list to traverse other skbs in
frag_list and make sure right udp payload is delivered to user space.
Unfortunately, other skbs in frag_list who are still ipv6 packets are
updated like the first skb and will have wrong transport header length.
e.g.before bpf_skb_proto_6_to_4,the first skb and other skbs in frag_list
has the same network_header(24)& transport_header(64), after
bpf_skb_proto_6_to_4, ipv6 protocol has been changed to ipv4, the first
skb's network_header is 44,transport_header is 64, other skbs in frag_list
didnot change.After skb_segment_list, the other skbs in frag_list has
different network_header(24) and transport_header(44), so there will be 20
bytes different from original,that is difference between ipv6 header and
ipv4 header. Just change transport_header to be the same with original.
Actually, there are two solutions to fix it, one is traversing all skbs
and changing every skb header in bpf_skb_proto_6_to_4, the other is
modifying frag_list skb's header in skb_segment_list. Considering
efficiency, adopt the second one--- when the first skb and other skbs in
frag_list has different network_header length, restore them to make sure
right udp payload is delivered to user space.
Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Wed, 4 May 2022 12:32:27 +0000 (12:32 +0000)]
net: sfc: fix memory leak due to ptp channel
It fixes memory leak in ring buffer change logic.
When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.
While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
1024(default).
b. memory leak.
The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
- This is global value of rx queue size.
b. rx_queue->ptr_mask
- used for access ring buffer as circular ring.
- roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
- efx->rxq_entries - EFX_RXD_HEAD_ROOM
These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
- This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
- This is always 1023(default).
c. rx_queue->max_fill
- This is new ring buffer size - EFX_RXD_HEAD_ROOM.
sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.
Test commands:
ethtool -G <interface name> rx 4096
while :
do
ip link set <interface name> up
ip link set <interface name> down
done
In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.
Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 8 May 2022 19:42:05 +0000 (12:42 -0700)]
Merge tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some reverts of existing patches, which were necessary because of boot
issues due to wrong CPU clock handling and cache issues which led to
userspace segfaults with 32bit kernels. Dave has a whole bunch of
upcoming cache fixes which I then plan to push in the next merge
window.
Other than that just small updates and fixes, e.g. defconfig updates,
spelling fixes, a clocksource fix, boot topology fixes and a fix for
/proc/cpuinfo output to satisfy lscpu"
* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Revert "parisc: Increase parisc_cache_flush_threshold setting"
parisc: Mark cr16 clock unstable on all SMP machines
parisc: Fix typos in comments
parisc: Change MAX_ADDRESS to become unsigned long long
parisc: Merge model and model name into one line in /proc/cpuinfo
parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
parisc: Update 32- and 64-bit defconfigs
parisc: Only list existing CPUs in cpu_possible_mask
Revert "parisc: Fix patch code locking and flushing"
Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"
Linus Torvalds [Sun, 8 May 2022 18:38:23 +0000 (11:38 -0700)]
Merge tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to
backtrace through them correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by
hypervisor input.
- A fix in the recently added QoS handling for VAS (used for
communicating with coprocessors).
Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.
* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
Linus Torvalds [Sun, 8 May 2022 18:21:54 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A fix and an email address update:
- Prevent FPU state corruption.
The condition in irq_fpu_usable() grants FPU usage when the FPU is
not used in the kernel. That's just wrong as it does not take the
fpregs_lock()'ed regions into account. If FPU usage happens within
such a region from interrupt context, then the FPU state gets
corrupted.
That's a long standing bug, which got unearthed by the recent
changes to the random code.
- Josh wants to use his kernel.org email address"
* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Prevent FPU state corruption
MAINTAINERS: Update Josh Poimboeuf's email address
Linus Torvalds [Sun, 8 May 2022 18:18:11 +0000 (11:18 -0700)]
Merge tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix and an email address update:
- Mark the NMI safe time accessors notrace to prevent tracer
recursion when they are selected as trace clocks.
- John Stultz has a new email address"
* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Mark NMI safe time accessors as notrace
MAINTAINERS: Update email address for John Stultz
Linus Torvalds [Sun, 8 May 2022 18:10:17 +0000 (11:10 -0700)]
Merge tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A fix for the threaded interrupt core.
A quick sequence of request/free_irq() can result in a hang because
the interrupt thread did not reach the thread function and got stopped
in the kthread core already. That leaves a state active counter
arround which makes a invocation of synchronized_irq() on that
interrupt hang forever.
Ensure that the thread reached the thread function in request_irq() to
prevent that"
* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Synchronize interrupt thread startup
Helge Deller [Sun, 8 May 2022 16:25:00 +0000 (18:25 +0200)]
parisc: Mark cr16 clock unstable on all SMP machines
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
parisc: Change MAX_ADDRESS to become unsigned long long
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
MAX_ADDRESS (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net>
parisc: Merge model and model name into one line in /proc/cpuinfo
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
In commit 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY") Signed-off-by: Helge Deller <deller@gmx.de>
Linus Torvalds [Sun, 8 May 2022 17:28:22 +0000 (10:28 -0700)]
Merge tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PASID fix from Thomas Gleixner:
"A single bugfix for the PASID management code, which freed the PASID
too early. The PASID needs to be tied to the mm lifetime, not to the
address space lifetime"
* tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Fix PASID use-after-free issue
Linus Torvalds [Sun, 8 May 2022 17:10:51 +0000 (10:10 -0700)]
Merge tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became slightly larger as I've been off in the last weeks.
The majority of changes here is about ASoC, fixes for dmaengine
and for addressing issues reported by CI, as well as other
device-specific small fixes.
Also, fixes for FireWire core stack and the usual HD-audio quirks
are included"
* tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
ASoC: atmel: mchp-pdmc: set prepare_slave_config
ASoC: max98090: Generate notifications on changes for custom control
ASoC: max98090: Reject invalid values in custom control put()
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
ASoC: rt9120: Correct the reg 0x09 size to one byte
ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
ASoC: meson: axg-card: Fix nonatomic links
ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
ASoC: soc-ops: fix error handling
ASoC: meson: Fix event generation for G12A tohdmi mux
ASoC: meson: Fix event generation for AUI CODEC mux
ASoC: meson: Fix event generation for AUI ACODEC mux
...
Willy Tarreau [Sun, 8 May 2022 09:37:08 +0000 (11:37 +0200)]
ataflop: use a statically allocated error counters
This is the last driver making use of fd_request->error_count, which is
easy to get wrong as was shown in floppy.c. We don't need to keep it
there, it can be moved to the atari_floppy_struct instead, so let's do
this.
Willy Tarreau [Sun, 8 May 2022 09:37:07 +0000 (11:37 +0200)]
floppy: use a statically allocated error counter
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Takashi Iwai [Sun, 8 May 2022 08:49:25 +0000 (10:49 +0200)]
Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
Linus Torvalds [Sat, 7 May 2022 18:02:02 +0000 (11:02 -0700)]
Merge tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the bounds check for the 'gpio-reserved-ranges' device property
in gpiolib-of
- drop the assignment of the pwm base number in gpio-mvebu (this was
missed by the patch doing it globally for all pwm drivers)
- fix the fwnode assignment (use own fwnode, not the parent's one) for
the GPIO irqchip in gpio-visconti
- update the irq_stat field before checking the trigger field in
gpio-pca953x
- update GPIO entry in MAINTAINERS
* tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
gpio: visconti: Fix fwnode of GPIO IRQ
MAINTAINERS: update the GPIO git tree entry
gpio: mvebu: drop pwm base assignment
gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
Linus Torvalds [Sat, 7 May 2022 17:47:51 +0000 (10:47 -0700)]
Merge tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A single revert for a change that isn't needed in 5.18, and a small
series for s390/dasd"
* tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
s390/dasd: Use kzalloc instead of kmalloc/memset
s390/dasd: Fix read inconsistency for ESE DASD devices
s390/dasd: Fix read for ESE with blksize < 4k
s390/dasd: prevent double format of tracks for ESE devices
s390/dasd: fix data corruption for ESE devices
Revert "block: release rq qos structures for queue without disk"
Using min_t(int, ...) as a potential array index implies to the compiler
that negative offsets should be allowed. This is not the case, though.
Replace "int" with "unsigned int". Fixes the following warning exposed
under future CONFIG_FORTIFY_SOURCE improvements:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/rcupdate.h:29,
from include/linux/rculist.h:11,
from include/linux/pid.h:5,
from include/linux/sched.h:14,
from include/linux/delay.h:23,
from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
2796 | memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
| ^~~~~~
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
2798 | memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
| ^~~~~~
Additionally remove needless cast from u8[] to char * in last strim()
call.
Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com Fixes: fc9279298e3a ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()") Fixes: 24c521f81c30 ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string") Cc: Raju Rangoju <rajur@chelsio.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 5 May 2022 16:19:46 +0000 (09:19 -0700)]
netlink: do not reset transport header in netlink_recvmsg()
netlink_recvmsg() does not need to change transport header.
If transport header was needed, it should have been reset
by the producer (netlink_dump()), not the consumer(s).
The following trace probably happened when multiple threads
were using MSG_PEEK.
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x204/0x2c0 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
____sys_recvmsg+0x162/0x2f0
___sys_recvmsg net/socket.c:2674 [inline]
__sys_recvmsg+0x209/0x3f0 net/socket.c:2704
__do_sys_recvmsg net/socket.c:2714 [inline]
__se_sys_recvmsg net/socket.c:2711 [inline]
__x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Linus Torvalds [Fri, 6 May 2022 21:32:16 +0000 (14:32 -0700)]
Merge tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Regression fixes in zone activation:
- move a loop invariant out of the loop to avoid checking space
status
- properly handle unlimited activation
Other fixes:
- for subpage, force the free space v2 mount to avoid a warning and
make it easy to switch a filesystem on different page size systems
- export sysfs status of exclusive operation 'balance paused', so the
user space tools can recognize it and allow adding a device with
paused balance
- fix assertion failure when logging directory key range item"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: export the balance paused state of exclusive operation
btrfs: fix assertion failure when logging directory key range item
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs: zoned: move non-changing condition check out of the loop
btrfs: force v2 space cache usage for subpage mount
Linus Torvalds [Fri, 6 May 2022 20:19:11 +0000 (13:19 -0700)]
Merge tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a socket leak when setting up an AF_LOCAL RPC client
- Ensure that knfsd connects to the gss-proxy daemon on setup
Bugfixes:
- Fix a refcount leak when migrating a task off an offlined transport
- Don't gratuitously invalidate inode attributes on delegation return
- Don't leak sockets in xs_local_connect()
- Ensure timely close of disconnected AF_LOCAL sockets"
* tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
SUNRPC: Ensure gss-proxy connects on setup
SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets
SUNRPC: Don't leak sockets in xs_local_connect()
NFSv4: Don't invalidate inode attributes on delegation return
SUNRPC release the transport of a relocated task with an assigned transport
The metadata dst is leaked when ip_route_input_mc() updates the dst for
the skb. Commit f38a9eb1f77b ("dst: Metadata destinations") correctly
handled dropping the dst in ip_route_input_slow() but missed the
multicast case which is handled by ip_route_input_mc(). Drop the dst in
ip_route_input_mc() avoiding the leak.
Fixes: f38a9eb1f77b ("dst: Metadata destinations") Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / mirror_ubuntu-kernels.git / log