Andrew Lunn [Sat, 12 May 2012 12:57:59 +0000 (14:57 +0200)]
ARM: Kirkwood: Add basic device tree support for QNAP TS219.
The two different variants of QNAP TS devices, varying by SoC, put the
GPIO keys on different GPIO lines. Hence we need two different DT
board descriptions, which share the same board-ts219.c file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
Andrew Lunn [Sun, 10 Jun 2012 13:20:06 +0000 (15:20 +0200)]
ARM: Orion: DTify the watchdog timer.
Add device tree support to the Orion watchdog timer, and enable its
use in the kirkwood devices using device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
Andrew Lunn [Fri, 20 Jul 2012 11:51:55 +0000 (13:51 +0200)]
ARM: Orion: Add arch support needed for I2C via DT.
The MV64XXX I2C driver needs a clock in order to calculate the baud
rate factors. So add an clk to the clk tree. Also add the base DT
properties for kirkwood devices.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Conflicts:
arch/arm/mach-kirkwood/common.c
Andrew Lunn [Wed, 27 Jun 2012 11:40:04 +0000 (13:40 +0200)]
ARM: Orion: DT support for IRQ and GPIO Controllers
Both IRQ and GPIO controllers can now be represented in DT. The IRQ
controllers are setup first, and then the GPIO controllers. Interrupts
for GPIO lines are placed directly after the main interrupts in the
interrupt space.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
Andrew Lunn [Fri, 27 Jul 2012 14:45:04 +0000 (16:45 +0200)]
Merge tag 'spi-3.6' into v3.5-rc7-dt-v3
spi: Updates for 3.6
Since Grant is even more specacularly busy than usual for the time being
I've been collecting SPI patches for him for this release - probably
things will revert back to Grant before the next release. There's
nothing too exciting here, mostly it's simple driver specific stuff:
- Add spi: to the modaliases of SPI devices to provide namespacing.
- A driver for AD-FMCOMMS1-EBZ.
- DT binding for Orion.
- Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.
There may be a few more fixes I've missed, people keep sending me new
things.
Simon Baatz [Wed, 18 Jul 2012 22:04:09 +0000 (00:04 +0200)]
ARM: Orion: fix driver probe error handling with respect to clk
The clk patches added code to get and enable clocks in the
respective driver probe functions. If the probe function failed
for some reason after enabling the clock, the clock was not
disabled again in many cases.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lumm <andrew@lunn.ch>
Simon Baatz [Fri, 6 Jul 2012 18:42:38 +0000 (20:42 +0200)]
ARM: Kirkwood: Fix PHY disable clk problems
Commit 98d9986 (ARM: Kirkwood: Replace clock gating) and the fix 5fb2ce
(ARM: Kirkwood: clk_register_gate_fn: add fn assignment) introduced a custom
variant of clock gating which allows to define a function to be called
before gating the clock off.
This is used to disable the SATA and PCIe PHYs if the respective clocks
are unused after initialization.
However, of these two drivers, the SATA driver may be compiled as a module.
The driver re-enables the clocks at module init but the PHYs stay disabled.
Since the custom clock gating disabled the PHYs when gating the clock off,
it should also re-enable them when enabling the clock gate. This is done by
adding a second function that may be used to enable the PHYs.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Andrew Lunn [Thu, 19 Jul 2012 06:58:08 +0000 (08:58 +0200)]
ARM: Kirkwood: Ensure runit clock always ticks.
Marvell engineers tell us:
It seems that many units use the RUNIT clock.
SPI, UART, NAND, TWSI, ...
So it's not possible to clock gate it.
Currently the SPI, NAND and TWSI driver will clk_prepaure_enable()
this clk, but since we have no idea what ... is, and turning this clk
off results in a hard lock, unconditionally enable runit.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
Michael Walle [Mon, 23 Jul 2012 11:16:54 +0000 (13:16 +0200)]
spi/orion: remove uneeded spi_info
This was formerly used to store the tclk value. This is now discovered
using the clk API, rather than pass it as platform data.
Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
We are currently using an inferior or equal operator for comparing
the transfer frequency with the clock frequency table. Because of
this, we always end up selecting 20Mhz as a frequency, due to the
inequality transfer hz <= 20 Mhz being always true. Fix this by
reversing the inequality, which is how the comparison should be done.
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Andrew Lunn [Mon, 23 Jul 2012 10:08:09 +0000 (12:08 +0200)]
spi/orion: add device tree binding
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
spi/omap2: mark omap2_mcspi_master_setup as __devinit
This warning recently appeared with omap2plus_defconfig:
WARNING: drivers/spi/built-in.o(.devinit.text+0x3c4): Section mismatch in reference from the function omap2_mcspi_probe() to the function .init.text:omap2_mcspi_master_setup()
The function __devinit omap2_mcspi_probe() references
a function __init omap2_mcspi_master_setup().
If omap2_mcspi_master_setup is only used by omap2_mcspi_probe then
annotate omap2_mcspi_master_setup with a matching annotation.
The fix is obviously to mark the omap2_mcspi_master_setup function as
__devinit, rather than __init.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Shubhrajyoti D [Thu, 19 Jul 2012 17:46:52 +0000 (23:16 +0530)]
spi: omap2-mcspi: Fix the below warning
The dma_map and dma_unmap should have same parameter
passed otherwise we get the below warn.
ks8851 spi1.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000009f22]
[ 2.066925] Modules linked in:
[ 2.070312]
[ 2.071929] [<c001c250>] (unwind_backtrace+0x0/0x130) from [<c0043d84>] (warn_slowpath_common+0x4c/0x64)
[ 2.081909] [<c0043d84>] (warn_slowpath_common+0x4c/0x64) from [<c0043e30>] (warn_slowpath_fmt+0x30/0x40)
[ 2.091949] [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) from [<c0293824>] (check_unmap+0x6d0/0x7b0)
[ 2.101348] [<c0293824>] (check_unmap+0x6d0/0x7b0) from [<c02939cc>] (debug_dma_unmap_page+0x64/0x70)
[ 2.111053] [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) from [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc)
[ 2.121582] [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) from [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290)
[ 2.132537] [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) from [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438)
[ 2.144592] [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) from [<c03503bc>] (spi_pump_messages+0x100/0x160)
[ 2.156127] [<c03503bc>] (spi_pump_messages+0x100/0x160) from [<c006635c>] (kthread_worker_fn+0xac/0x180)
[ 2.166168] [<c006635c>] (kthread_worker_fn+0xac/0x180) from [<c0066578>] (kthread+0x90/0x9c)
[ 2.175140] [<c0066578>] (kthread+0x90/0x9c) from [<c00157fc>] (kernel_thread_exit+0x0/0x8)
[ 2.183898] ---[ end trace d1830ce6e44292f2 ]---
Fix the warn by changing the unmap parameter.
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Containing the regression fixes for USB-audio due to the transition to
the new streaming logic, mostly found on Logitech webcams."
* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: snd-usb: move calls to usb_set_interface
ALSA: usb-audio: Fix the first PCM interface assignment
Merge tag 'cpufreq-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull cpufreq fix from Rafael Wysocki:
"This fixes a regression preventing the ACPI cpufreq driver from
loading on some systems where it worked previously without any
problems."
* tag 'cpufreq-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq / ACPI: Fix not loading acpi-cpufreq driver regression
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Samsung SoC fixes from Arnd Bergmann.
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: S3C24XX: Correct CAMIF interrupt definitions
ARM: S3C24XX: Correct AC97 clock control bit for S3C2440
ARM: SAMSUNG: fix race in s3c_adc_start for ADC
ARM: SAMSUNG: Update default rate for xusbxti clock
ARM: EXYNOS: register devices in 'need_restore' state for pm_domains
ARM: EXYNOS: read initial state of power domain from hw registers
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU, perf, and scheduler fixes from Ingo Molnar.
The RCU fix is a revert for an optimization that could cause deadlocks.
One of the scheduler commits (164c33c6adee "sched: Fix fork() error path
to not crash") is correct but not complete (some architectures like Tile
are not covered yet) - the resulting additional fixes are still WIP and
Ingo did not want to delay these pending fixes. See this thread on
lkml:
[PATCH] fork: fix error handling in dup_task()
The perf fixes are just trivial oneliners.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf kvm: Fix segfault with report and mixed guestmount use
perf kvm: Fix regression with guest machine creation
perf script: Fix format regression due to libtraceevent merge
ring-buffer: Fix accounting of entries when removing pages
ring-buffer: Fix crash due to uninitialized new_pages list head
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS/sched: Update scheduler file pattern
sched/nohz: Rewrite and fix load-avg computation -- again
sched: Fix fork() error path to not crash
Bob Moore [Wed, 4 Jul 2012 02:02:32 +0000 (10:02 +0800)]
ACPICA: Fix possible fault in return package object repair code
Fixes a problem that can occur when a lone package object is
wrapped with an outer package object in order to conform to
the ACPI specification. Can affect these predefined names:
_ALR,_MLS,_PSS,_TRT,_TSS,_PRT,_HPX,_DLM,_CSD,_PSD,_TSD
Reported-by: Vlastimil Babka <caster@gentoo.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: <stable@vger.kernel.org> # 3.4 Signed-off-by: Len Brown <len.brown@intel.com>
Merge branch 'v3.5-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim <kgene.kim@samsung.com>:
* 'v3.5-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: Correct CAMIF interrupt definitions
ARM: S3C24XX: Correct AC97 clock control bit for S3C2440
ARM: SAMSUNG: fix race in s3c_adc_start for ADC
ARM: SAMSUNG: Update default rate for xusbxti clock
ARM: EXYNOS: register devices in 'need_restore' state for pm_domains
ARM: EXYNOS: read initial state of power domain from hw registers
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull the leap second fixes from Thomas Gleixner:
"It's a rather large series, but well discussed, refined and reviewed.
It got a massive testing by John, Prarit and tip.
In theory we could split it into two parts. The first two patches
are merely preventing the stuff loops forever issues, which people
have observed.
But there is no point in delaying the other 4 commits which achieve
full correctness into 3.6 as they are tagged for stable anyway. And I
rather prefer to have the full fixes merged in bulk than a "prevent
the observable wreckage and deal with the hidden fallout later"
approach."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Update hrtimer base offsets each hrtimer_interrupt
timekeeping: Provide hrtimer update function
hrtimers: Move lock held region in hrtimer_interrupt()
timekeeping: Maintain ktime_t based offsets for hrtimers
timekeeping: Fix leapsecond triggered load spike issue
hrtimer: Provide clock_was_set_delayed()
Will Drewry [Fri, 13 Jul 2012 17:06:35 +0000 (12:06 -0500)]
x86/vsyscall: allow seccomp filter in vsyscall=emulate
If a seccomp filter program is installed, older static binaries and
distributions with older libc implementations (glibc 2.13 and earlier)
that rely on vsyscall use will be terminated regardless of the filter
program policy when executing time, gettimeofday, or getcpu. This is
only the case when vsyscall emulation is in use (vsyscall=emulate is the
default).
This patch emulates system call entry inside a vsyscall=emulate by
populating regs->ax and regs->orig_ax with the system call number prior
to calling into seccomp such that all seccomp-dependencies function
normally. Additionally, system call return behavior is emulated in line
with other vsyscall entrypoints for the trace/trap cases.
[ v2: fixed ip and sp on SECCOMP_RET_TRAP/TRACE (thanks to luto@mit.edu) ] Reported-and-tested-by: Owen Kibel <qmewlo@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'nfs-for-3.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix an NFSv4 mount regression
- Fix O_DIRECT list manipulation snafus
* tag 'nfs-for-3.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix an NFSv4 mount regression
NFS: Fix list manipulation snafus in fs/nfs/direct.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"The changes are limited to adding new VID/PID combinations to drivers
to enable support for new versions of hardware, most notably hardware
found in new MacBook Pro Retina boxes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add Andamiro Pump It Up pad
Input: xpad - add signature for Razer Onza Tournament Edition
Input: xpad - handle all variations of Mad Catz Beat Pad
Input: bcm5974 - Add support for 2012 MacBook Pro Retina
HID: add support for 2012 MacBook Pro Retina
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Some regression fixes at the audio part for devices with
cx23885/cx25840
- A DMA corruption fix at cx231xx
- two fixes at the winbond IR driver
- Several fixes for the EXYNOS media driver (s5p)
- two fixes at the OMAP3 preview driver
- one fix at the dvb core failure path
- an include missing (slab.h) at smiapp-core causing compilation
breakage
- em28xx was not loading the IR driver driver anymore.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits)
[media] Revert "[media] V4L: JPEG class documentation corrections"
[media] s5p-fimc: Add missing FIMC-LITE file operations locking
[media] omap3isp: preview: Fix contrast and brightness handling
[media] omap3isp: preview: Fix output size computation depending on input format
[media] winbond-cir: Initialise timeout, driver_type and allowed_protos
[media] winbond-cir: Fix txandrx module info
[media] cx23885: Silence unknown command warnings
[media] cx23885: add support for HVR-1255 analog (cx23888 variant)
[media] cx23885: make analog support work for HVR_1250 (cx23885 variant)
[media] cx25840: fix vsrc/hsrc usage on cx23888 designs
[media] cx25840: fix regression in HVR-1800 analog audio
[media] cx25840: fix regression in analog support hue/saturation controls
[media] cx25840: fix regression in HVR-1800 analog support
[media] s5p-mfc: Fixed setup of custom controls in decoder and encoder
[media] cx231xx: don't DMA to random addresses
[media] em28xx: fix em28xx-rc load
[media] dvb-core: Release semaphore on error path dvb_register_device()
[media] s5p-fimc: Stop media entity pipeline if fimc_pipeline_validate fails
[media] s5p-fimc: Fix compiler warning in fimc-lite.c
[media] s5p-fimc: media_entity_pipeline_start() may fail
...
Merge tag 'mmc-fixes-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC fixes from Chris Ball:
- Revert a patch that made failing to select power class fatal;
it turns out that it fails non-fatally on Tegra boards.
Regression against 3.5-rc1.
- Add the IRQF_ONESHOT flag to the cd-gpio driver, which turned
into a regression in 3.5-rc1 when IRQF_ONESHOT became required
for threaded IRQs with no handler.
* tag 'mmc-fixes-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: cd-gpio: pass IRQF_ONESHOT to request_threaded_irq()
mmc: core: Revert "skip card initialization if power class selection fails"
Merge tag 'for-linus-20120712' of git://git.infradead.org/linux-mtd
Pull late MTD fixes from David Woodhouse:
- fix 'sparse warning fix' regression which totally breaks MXC NAND
- fix GPMI NAND regression when used with UBI
- update/correct sysfs documentation for new 'bitflip_threshold' field
- fix nandsim build failure
* tag 'for-linus-20120712' of git://git.infradead.org/linux-mtd:
mtd: nandsim: don't open code a do_div helper
mtd: ABI documentation: clarification of bitflip_threshold
mtd: gpmi-nand: fix read page when reading to vmalloced area
mtd: mxc_nand: use 32bit copy functions
Merge tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFD Fixes from Samuel Ortiz:
- Three Palmas fixes, One of them being a build error fix.
- Two mc13xx fixes. One for fixing an SPI regmap configuration and
another one for working around an i.Mx hardware bug.
- One omap-usb regression fix.
- One twl6040 build breakage fix.
- One file deletion (ab5500-core.h) that was overlooked during the last
merge window.
* tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Add missing hunk to change palmas irq to clear on read
mfd: Fix palmas regulator pdata missing
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.
mfd: Update twl6040 Kconfig to avoid build breakage
mfd: Delete ab5500-core.h
mfd: mc13xxx workaround SPI hardware bug on i.Mx
mfd: Fix mc13xxx SPI regmap
mfd: Add terminating entry for i2c_device_id palmas table
Pull a couple of KVM fixes from Avi Kivity:
"One is an adjustment for an irq layer change that affected device
assignment, the other a one-liner ppc fix."
Jeff Moyer [Thu, 12 Jul 2012 13:43:14 +0000 (09:43 -0400)]
block: fix infinite loop in __getblk_slow
Commit 080399aaaf35 ("block: don't mark buffers beyond end of disk as
mapped") exposed a bug in __getblk_slow that causes mount to hang as it
loops infinitely waiting for a buffer that lies beyond the end of the
disk to become uptodate.
The problem was initially reported by Torsten Hilbrich here:
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
ret = grow_buffers(bdev, block, size);
if (ret < 0)
return NULL;
if (ret == 0)
free_more_memory();
}
__find_get_block does not find the block, since it will not be marked as
mapped, and so grow_buffers is called to fill in the buffers for the
associated page. I believe the for (;;) loop is there primarily to
retry in the case of memory pressure keeping grow_buffers from
succeeding. However, we also continue to loop for other cases, like the
block lying beond the end of the disk. So, the fix I came up with is to
only loop when grow_buffers fails due to memory allocation issues
(return value of 0).
The attached patch was tested by myself, Torsten, and Rich, and was
found to resolve the problem in call cases.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Josh Boyer <jwboyer@redhat.com> Cc: Stable <stable@vger.kernel.org> # 3.0+
[ Jens is on vacation, taking this directly - Linus ]
--
Stable Notes: this patch requires backport to 3.0, 3.2 and 3.3. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hui Wang [Fri, 13 Jul 2012 02:51:29 +0000 (10:51 +0800)]
spi/imx: use gpio_is_valid to determine if a gpio is valid
Use gpio_is_valid() to replace "gpio >= 0" or "gpio < 0".
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Hui Wang [Fri, 13 Jul 2012 02:51:28 +0000 (10:51 +0800)]
spi/imx: remove redundant config.speed_hz setting
The config.speed_hz is just setted at the two lines ahead of it,
obviously we don't need to copy the code to set the config.speed_hz
again. Remove it for a cleanup.
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Properly define the CAMIF interrupt resources. This device have two
interrupts - corresponding to the "codec" and "preview" data paths.
IRQ_CAM is handled internally by the architecture and demultiplexed
to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only
should be handled in the driver.
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Daniel Mack [Thu, 12 Jul 2012 11:08:40 +0000 (13:08 +0200)]
ALSA: snd-usb: move calls to usb_set_interface
The rework of the snd-usb endpoint logic moved the calls to
snd_usb_set_interface() into the snd_usb_endpoint implemenation. This
changed the order in which these calls are issued to the device, and
thereby caused regressions for some webcams.
Fix this by moving the calls back to pcm.c for now to make it work again
and use snd_usb_endpoint_activate() to really tear down all remaining
URBs in the flight, consequently fixing another regression caused by USB
packets on the wire after altsetting 0 has been selected.
Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Philipp Dreimann <philipp@dreimann.net> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
I couldn't find the vendor ID in any of the online databases, but this
mat has a Pump It Up logo on the top side of the controller compartment,
and a disclaimer stating that Andamiro will not be liable on the bottom.
Tushar Behera [Thu, 12 Jul 2012 09:06:28 +0000 (18:06 +0900)]
ARM: SAMSUNG: Update default rate for xusbxti clock
The rate of xusbxti clock is set in individual machine files.
The default value should be defined at the clock definition
and individual machine files should modify it if required.
Division by zero in kernel.
[<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12)
[<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78)
[<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78)
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jean Delvare [Thu, 12 Jul 2012 20:47:37 +0000 (22:47 +0200)]
hwmon: (it87) Preserve configuration register bits on init
We were accidentally losing one bit in the configuration register on
device initialization. It was reported to freeze one specific system
right away. Properly preserve all bits we don't explicitly want to
change in order to prevent that.
Thomas Renninger [Thu, 12 Jul 2012 10:24:33 +0000 (12:24 +0200)]
cpufreq / ACPI: Fix not loading acpi-cpufreq driver regression
Commit d640113fe80e45ebd4a5b420b introduced a regression on SMP
systems where the processor core with ACPI id zero is disabled
(typically should be the case because of hyperthreading).
The regression got spread through stable kernels.
On 3.0.X it got introduced via 3.0.18.
Such platforms may be rare, but do exist.
Look out for a disabled processor with acpi_id 0 in dmesg:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled)
This problem has been observed on a:
HP Proliant BL280c G6 blade
This patch restricts the introduced workaround to platforms
with nr_cpu_ids <= 1.
Signed-off-by: Thomas Renninger <trenn@suse.de> CC: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Marek Szyprowski [Thu, 12 Jul 2012 08:29:55 +0000 (17:29 +0900)]
ARM: EXYNOS: register devices in 'need_restore' state for pm_domains
Commit ca1d72f033 ('PM / Domains: Make it possible to add devices to
inactive domains') introduced possibility to add devices to inactive
power domains and added pm_genpd_dev_need_restore() function which lets
platform core to notify power domain core that the specified device must
be restored (with its runtime_resume() callback) before first use.
This patch adds the pm_genpd_dev_need_restore() call what brings back
the suspend/resume behaviour for the client devices known from the
previous power domain driver (removed by commit 91cfbd4ee0 - 'ARM:
EXYNOS: Hook up power domains to generic power domain infrastructure').
Client device drivers relay on that suspend/resume behaviour, thus this
patch fixes runtime pm operation for client devices.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Marek Szyprowski [Thu, 12 Jul 2012 08:29:54 +0000 (17:29 +0900)]
ARM: EXYNOS: read initial state of power domain from hw registers
Some bootloaders disable unused power domains to reduce power
consuption. Power domain driver can easily read the actual state from
the hardware registers instead of assuming that their initial state is
always 'on'.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The macros just called BUG(), but that results in unused variable
warnings all over the place, like in the IPMI driver. The build
regression emails were annoying me, so here's the fix. I have
not even compile tested this, but it's rather obvious.
[ port type mangled to unsigned long ]
Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Merge tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6
Pull fbdev fixes from Florian Tobias Schandinat:
"Two fixes for OMAPDSS by Tomi Valkeinen:
- one to avoid warnings when runtime PM is not enabled
- one workaround to dependancy issues during suspend/resume"
* tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6:
OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n
OMAPDSS: Use PM notifiers for system suspend
Yinghai Lu [Wed, 11 Jul 2012 21:02:56 +0000 (14:02 -0700)]
memblock: free allocated memblock_reserved_regions later
memblock_free_reserved_regions() calls memblock_free(), but
memblock_free() would double reserved.regions too, so we could free the
old range for reserved.regions.
Also tj said there is another bug which could be related to this.
| I don't think we're saving any noticeable
| amount by doing this "free - give it to page allocator - reserve
| again" dancing. We should just allocate regions aligned to page
| boundaries and free them later when memblock is no longer in use.
in that case, when DEBUG_PAGEALLOC, will get panic:
After commit f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint
in alloc_bootmem_section"), usemap allocations may easily be placed
outside the optimal section that holds the node descriptor, even if
there is space available in that section. This results in unnecessary
hotplug dependencies that need to have the node unplugged before the
section holding the usemap.
The reason is that the bootmem allocator doesn't guarantee a linear
search starting from the passed allocation goal but may start out at a
much higher address absent an upper limit.
Fix this by trying the allocation with the limit at the section end,
then retry without if that fails. This keeps the fix from f5bf18fa22f8
of not panicking if the allocation does not fit in the section, but
still makes sure to try to stay within the section at first.
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.3.x, 3.4.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 238305bb4d41 ("mm: remove sparsemem allocation details from the
bootmem allocator") introduced a bug in the allocation goal calculation
that put section usemaps not in the same section as the node
descriptors, creating unnecessary hotplug dependencies between them:
node 0 must be removed before remove section 16399
node 1 must be removed before remove section 16399
node 2 must be removed before remove section 16399
node 3 must be removed before remove section 16399
node 4 must be removed before remove section 16399
node 5 must be removed before remove section 16399
node 6 must be removed before remove section 16399
The reason is that it applies PAGE_SECTION_MASK to the physical address
of the node descriptor when finding a suitable place to put the usemap,
when this mask is actually intended to be used with PFNs. Because the
PFN mask is wider, the target address will point beyond the wanted
section holding the node descriptor and the node must be offlined before
the section holding the usemap can go.
Fix this by extending the mask to address width before use.
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_add_to_page_cache() has three callsites, but only one of them wants
the radix_tree_preload() (an exceptional entry guarantees that the radix
tree node is present in the other cases), and only that site can achieve
mem_cgroup_uncharge_cache_page() (PageSwapCache makes it a no-op in the
other cases). We did it this way originally to reflect
add_to_page_cache_locked(); but it's confusing now, so move the radix_tree
preloading and mem_cgroup uncharging to that one caller.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When adding the page_private checks before calling shmem_replace_page(), I
did realize that there is a further race, but thought it too unlikely to
need a hurried fix.
But independently I've been chasing why a mem cgroup's memory.stat
sometimes shows negative rss after all tasks have gone: I expected it to
be a stats gathering bug, but actually it's shmem swapping's fault.
It's an old surprise, that when you lock_page(lookup_swap_cache(swap)),
the page may have been removed from swapcache before getting the lock; or
it may have been freed and reused and be back in swapcache; and it can
even be using the same swap location as before (page_private same).
The swapoff case is already secure against this (swap cannot be reused
until the whole area has been swapped off, and a new swapped on); and
shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for
the expected radix_tree entry - but a little too late.
By that time, we might have already decided to shmem_replace_page(): I
don't know of a problem from that, but I'd feel more at ease not to do so
spuriously. And we have already done mem_cgroup_cache_charge(), on
perhaps the wrong mem cgroup: and this charge is not then undone on the
error path, because PageSwapCache ends up preventing that.
It's this last case which causes the occasional negative rss in
memory.stat: the page is charged here as cache, but (sometimes) found to
be anon when eventually it's uncharged - and in between, it's an
undeserved charge on the wrong memcg.
Fix this by adding an earlier check on the radix_tree entry: it's
inelegant to descend the tree twice, but swapping is not the fast path,
and a better solution would need a pair (try+commit) of memcg calls, and a
rework of shmem_replace_page() to keep out of the swapcache.
We can use the added shmem_confirm_swap() function to replace the
find_get_page+page_cache_release we were already doing on the error path.
And add a comment on that -EEXIST: it seems a peculiar errno to be using,
but originates from its use in radix_tree_insert().
[It can be surprising to see positive rss left in a memcg's memory.stat
after all tasks have gone, since it is supposed to count anonymous but not
shmem. Aside from sharing anon pages via fork with a task in some other
memcg, it often happens after swapping: because a swap page can't be freed
while under writeback, nor while locked. So it's not an error, and these
residual pages are easily freed once pressure demands.]
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert 4fb5ef089b28 ("tmpfs: support SEEK_DATA and SEEK_HOLE"). I believe
it's correct, and it's been nice to have from rc1 to rc6; but as the
original commit said:
I don't know who actually uses SEEK_DATA or SEEK_HOLE, and whether it
would be of any use to them on tmpfs. This code adds 92 lines and 752
bytes on x86_64 - is that bloat or worthwhile?
Nobody asked for it, so I conclude that it's bloat: let's revert tmpfs to
the dumb generic support for v3.5. We can always reinstate it later if
useful, and anyone needing it in a hurry can just get it out of git.
Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Josef Bacik <josef@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Dave Chinner <david@fromorbit.com> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Jeff liu <jeff.liu@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hilman [Wed, 11 Jul 2012 21:02:44 +0000 (14:02 -0700)]
drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT
Requesting a threaded interrupt without a primary handler and without
IRQF_ONESHOT is dangerous, and after commit 1c6c6952 ("genirq: Reject
bogus threaded irq requests"), these requests are rejected. This causes
->probe() to fail, and the RTC driver not to be availble.
To fix, add IRQF_ONESHOT to the IRQ flags.
Tested on OMAP3730/OveroSTORM and OMAP4430/Panda board using rtcwake to
wake from system suspend multiple times.
Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fat_encode_fh() can fetch an invalid i_pos value on systems where 64-bit
accesses are not atomic. Make it use the same accessor as the rest of the
FAT code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 11 Jul 2012 21:02:38 +0000 (14:02 -0700)]
sgi-xp: nested calls to spin_lock_irqsave()
The code here has a nested spin_lock_irqsave(). It's not needed since
IRQs are already disabled and it causes a problem because it means that
IRQs won't be enabled again at the end. The second call to
spin_lock_irqsave() will overwrite the value of irq_flags and we can't
restore the proper settings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8()
irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts
Modules linked in:
(unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64)
(warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40)
(warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8)
(handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38)
(handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4)
(handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38)
(generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84)
(handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c)
(avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60)
Exception stack(0xc050bf60 to 0xc050bfa8)
bf60: 0000000100000000003c4208c0018e20c050a000c050a000c054a4c8c050a000
bf80: c05157a84117b36380503bb40000000001000000c050bfa8c0018e2cc000e808
bfa0: 60000013ffffffff
(__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30)
(default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8)
(cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c)
include/linux/regset.h: In function 'user_regset_copyout_zero':
include/linux/regset.h:289:3: error: implicit declaration of function '__clear_user' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/h8300/kernel/time.c: In function 'h8300_timer_tick':
arch/h8300/kernel/time.c:39:2: error: implicit declaration of function 'get_irq_regs' [-Werror=implicit-function-declaration]
arch/h8300/kernel/time.c:39:42: error: invalid type argument of '->' (have 'int')
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/h8300/kernel/signal.c:455:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
arch/h8300/kernel/signal.c: In function 'do_notify_resume':
arch/h8300/kernel/signal.c:511:3: error: implicit declaration of function 'do_signal' [-Werror=implicit-function-declaration]
arch/h8300/kernel/signal.c: At top level:
arch/h8300/kernel/signal.c:414:1: warning: 'handle_signal' defined but not used [-Wunused-function]
Introduced in commit 7ae4e32a6514 ("h8300: switch to saved_sigmask-based
sigsuspend/rt_sigsuspend")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/sched/core.c: In function 'context_switch':
kernel/sched/core.c:2061:2: error: implicit declaration of function 'arch_start_context_switch' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lee Jones [Wed, 11 Jul 2012 21:02:17 +0000 (14:02 -0700)]
drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled
Without this patch, if Device Tree is enabled the AB8500 RTC wouldn't get
probed at all, as there is no reference to it from platform code. This
patch ensures the driver is probed during normal DT start-up.
[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Wed, 11 Jul 2012 21:02:13 +0000 (14:02 -0700)]
mm, thp: abort compaction if migration page cannot be charged to memcg
If page migration cannot charge the temporary page to the memcg,
migrate_pages() will return -ENOMEM. This isn't considered in memory
compaction however, and the loop continues to iterate over all
pageblocks trying to isolate and migrate pages. If a small number of
very large memcgs happen to be oom, however, these attempts will mostly
be futile leading to an enormous amout of cpu consumption due to the
page migration failures.
This patch will short circuit and fail memory compaction if
migrate_pages() returns -ENOMEM. COMPACT_PARTIAL is returned in case
some migrations were successful so that the page allocator will retry.
Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"no other files mapped" requirement from my previous patch (c/r: prctl:
update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal) is too
paranoid, it forbids operation even if there mapped one shared-anon vma.
Let's check that current mm->exe_file already unmapped, in this case
exe_file symlink already outdated and its changing is reasonable.
Plus, this patch fixes exit code in case operation success.
Luis Henriques [Wed, 11 Jul 2012 21:02:10 +0000 (14:02 -0700)]
ocfs2: fix NULL pointer dereference in __ocfs2_change_file_space()
As ocfs2_fallocate() will invoke __ocfs2_change_file_space() with a NULL
as the first parameter (file), it may trigger a NULL pointer dereferrence
due to a missing check.
mn10300: use "#elif defined(CONFIG_*)" instead of "#elif CONFIG_*"
Fix the warnings:
arch/mn10300/kernel/irq.c:173:7: warning: "CONFIG_MN10300_TTYSM1_TIMER9" is not defined [-Wundef]
arch/mn10300/kernel/irq.c:175:7: warning: "CONFIG_MN10300_TTYSM1_TIMER3" is not defined [-Wundef]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/mn10300/mm/dma-alloc.c: At top level:
arch/mn10300/mm/dma-alloc.c:63:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/mm/dma-alloc.c:63:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/mm/dma-alloc.c:63:1: warning: parameter names (without types) in function declaration [enabled by default]
arch/mn10300/mm/dma-alloc.c:75:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/mm/dma-alloc.c:75:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/mm/dma-alloc.c:75:1: warning: parameter names (without types) in function declaration [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/mn10300/kernel/traps.c:304:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/kernel/traps.c:304:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/kernel/traps.c:304:1: warning: parameter names (without types) in function declaration [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mn10300: remove duplicate definition of PTRACE_O_TRACESYSGOOD
Fix the warning:
include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default]
arch/mn10300/include/asm/ptrace.h:85:0: note: this is the location of the previous definition
We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mn10300: move setup_jiffies_interrupt() to cevt-mn10300.c
Move the static inline function setup_jiffies_interrupt() from
<asm/timex.h> to arch/mn10300/kernel/cevt-mn10300.c, which is its only
callsite.
This allows to remove the inclusion of <asm/hardirq.h> and <linux/irq.h>
from <asm/timex.h> and <unit/timex.h>, fixing include hell like:
include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef]
include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef]
include/linux/jiffies.h:46:42: error: division by zero in #if
...
make[4]: *** [arch/mn10300/kernel/asm-offsets.s] Error 1
and (after a quick hack for the above by defining CLOCK_TICK_RATE in
<linux/jiffies.h>):
In file included from include/linux/notifier.h:15:0,
from include/linux/memory_hotplug.h:6,
from include/linux/mmzone.h:718,
from include/linux/gfp.h:4,
from include/linux/irq.h:20,
from arch/mn10300/unit-asb2303/include/unit/timex.h:15,
from arch/mn10300/include/asm/timex.h:15,
from include/linux/timex.h:174,
from include/linux/jiffies.h:8,
from include/linux/ktime.h:25,
from include/linux/timer.h:5,
from include/linux/workqueue.h:8,
include/linux/srcu.h:55:22: error: field 'work' has incomplete type
As a consequence, we do need a few more inclusions of <asm/irq.h>, namely
in arch/mn10300/unit-asb2303/smc91111.c and
arch/mn10300/unit-asb2305/unit-init.c.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiang Liu [Wed, 11 Jul 2012 21:01:52 +0000 (14:01 -0700)]
memory hotplug: fix invalid memory access caused by stale kswapd pointer
kswapd_stop() is called to destroy the kswapd work thread when all memory
of a NUMA node has been offlined. But kswapd_stop() only terminates the
work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale
pointer will prevent kswapd_run() from creating a new work thread when
adding memory to the memory-less NUMA node again. Eventually the stale
pointer may cause invalid memory access.
An example stack dump as below. It's reproduced with 2.6.32, but latest
kernel has the same issue.
John Stultz [Tue, 10 Jul 2012 22:43:25 +0000 (18:43 -0400)]
hrtimer: Update hrtimer base offsets each hrtimer_interrupt
The update of the hrtimer base offsets on all cpus cannot be made
atomically from the timekeeper.lock held and interrupt disabled region
as smp function calls are not allowed there.
clock_was_set(), which enforces the update on all cpus, is called
either from preemptible process context in case of do_settimeofday()
or from the softirq context when the offset modification happened in
the timer interrupt itself due to a leap second.
In both cases there is a race window for an hrtimer interrupt between
dropping timekeeper lock, enabling interrupts and clock_was_set()
issuing the updates. Any interrupt which arrives in that window will
see the new time but operate on stale offsets.
So we need to make sure that an hrtimer interrupt always sees a
consistent state of time and offsets.
ktime_get_update_offsets() allows us to get the current monotonic time
and update the per cpu hrtimer base offsets from hrtimer_interrupt()
to capture a consistent state of monotonic time and the offsets. The
function replaces the existing ktime_get() calls in hrtimer_interrupt().
The overhead of the new function vs. ktime_get() is minimal as it just
adds two store operations.
This ensures that any changes to realtime or boottime offsets are
noticed and stored into the per-cpu hrtimer base structures, prior to
any hrtimer expiration and guarantees that timers are not expired early.
Signed-off-by: John Stultz <johnstul@us.ibm.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-8-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Tue, 10 Jul 2012 22:43:24 +0000 (18:43 -0400)]
timekeeping: Provide hrtimer update function
To finally fix the infamous leap second issue and other race windows
caused by functions which change the offsets between the various time
bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a
function which atomically gets the current monotonic time and updates
the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic
overhead. The previous patch which provides ktime_t offsets allows us
to make this function almost as cheap as ktime_get() which is going to
be replaced in hrtimer_interrupt().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Tue, 10 Jul 2012 22:43:23 +0000 (18:43 -0400)]
hrtimers: Move lock held region in hrtimer_interrupt()
We need to update the base offsets from this code and we need to do
that under base->lock. Move the lock held region around the
ktime_get() calls. The ktime_get() calls are going to be replaced with
a function which gets the time and the offsets atomically.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/1341960205-56738-6-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Tue, 10 Jul 2012 22:43:21 +0000 (18:43 -0400)]
timekeeping: Maintain ktime_t based offsets for hrtimers
We need to update the hrtimer clock offsets from the hrtimer interrupt
context. To avoid conversions from timespec to ktime_t maintain a
ktime_t based representation of those offsets in the timekeeper. This
puts the conversion overhead into the code which updates the
underlying offsets and provides fast accessible values in the hrtimer
interrupt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-4-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The timekeeping code misses an update of the hrtimer subsystem after a
leap second happened. Due to that timers based on CLOCK_REALTIME are
either expiring a second early or late depending on whether a leap
second has been inserted or deleted until an operation is initiated
which causes that update. Unless the update happens by some other
means this discrepancy between the timekeeping and the hrtimer data
stays forever and timers are expired either early or late.
The reported immediate workaround - $ data -s "`date`" - is causing a
call to clock_was_set() which updates the hrtimer data structures.
See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix
Add the missing clock_was_set() call to update_wall_time() in case of
a leap second event. The actual update is deferred to softirq context
as the necessary smp function call cannot be invoked from hard
interrupt context.
Signed-off-by: John Stultz <johnstul@us.ibm.com> Reported-by: Jan Engelhardt <jengelh@inai.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-3-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
John Stultz [Tue, 10 Jul 2012 22:43:19 +0000 (18:43 -0400)]
hrtimer: Provide clock_was_set_delayed()
clock_was_set() cannot be called from hard interrupt context because
it calls on_each_cpu().
For fixing the widely reported leap seconds issue it is necessary to
call it from hard interrupt context, i.e. the timer tick code, which
does the timekeeping updates.
Provide a new function which denotes it in the hrtimer cpu base
structure of the cpu on which it is called and raise the hrtimer
softirq. We then execute the clock_was_set() notificiation from
softirq context in run_hrtimer_softirq(). The hrtimer softirq is
rarely used, so polling the flag there is not a performance issue.
[ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get
rid of all this ifdeffery ASAP ]
Signed-off-by: John Stultz <johnstul@us.ibm.com> Reported-by: Jan Engelhardt <jengelh@inai.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three fixes for data corruption (libsas task file),
oops causing (NULL in scsi_cmd_to_driver) and driver failure (bnx2i).
The oops caused by the NULL in scsi_cmd_to_driver() manifests in
scsi_eh_send_cmd() and has been seen by several people now.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] bnx2i: Removed the reference to the netdev->base_addr
[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf
[SCSI] Fix NULL dereferences in scsi_cmd_to_driver
Javier Martin [Wed, 11 Jul 2012 15:34:54 +0000 (17:34 +0200)]
media: mx2_camera: Fix mbus format handling
Do not use MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags. The driver
must negotiate with the attached sensor whether the mbus format is UYUV or
YUYV and set CSICR1 configuration accordingly.
This is needed for the video function on mach-imx27_visstrim_m10.c to
perform properly, since an earlier version of this patch has been proven
wrong and has been reverted and a commit, depending on it: "[media]
i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16" is in the mainline.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ g.liakhovetski@gmx.de: move a macro definition to a more logical place ] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ Applying directly because Mauro is on vacation - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- multiple omap2+ bug fixes
- a regression on ux500 dt support
- a build failure on shmobile
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
projects / mirror_ubuntu-zesty-kernel.git / log