Caleb Connolly [Sun, 15 Jan 2023 17:59:24 +0000 (17:59 +0000)]
net: ipa: disable ipa interrupt during suspend
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Heiner Kallweit [Sun, 15 Jan 2023 17:24:08 +0000 (18:24 +0100)]
net: stmmac: fix invalid call to mdiobus_get_phy()
In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().
Heiner Kallweit [Sun, 15 Jan 2023 10:54:06 +0000 (11:54 +0100)]
net: mdio: validate parameter addr in mdiobus_get_phy()
The caller may pass any value as addr, what may result in an out-of-bounds
access to array mdio_map. One existing case is stmmac_init_phy() that
may pass -1 as addr. Therefore validate addr before using it.
Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Szymon Heidrich [Sat, 14 Jan 2023 18:23:26 +0000 (19:23 +0100)]
net: usb: sr9700: Handle negative len
Packet len computed as difference of length word extracted from
skb data and four may result in a negative value. In such case
processing of the buffer should be interrupted rather than
setting sr_skb->len to an unexpectedly large value (due to cast
from signed to unsigned integer) and passing sr_skb to
usbnet_skb_return.
To avoid use of GFP_ATOMIC for memory allocation, disable preemption
after all memory allocation is done.
Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Jan 2023 13:40:55 +0000 (13:40 +0000)]
Merge branch 'l2tp-races'
Cong Wang says:
====================
l2tp: fix race conditions in l2tp_tunnel_register()
This patchset contains two patches, the first one is a preparation for
the second one which is the actual fix. Please find more details in
each patch description.
I have ran the l2tp test (https://github.com/katalix/l2tp-ktest),
all test cases are passed.
v3: preserve EEXIST errno for user-space
v2: move IDR allocation to l2tp_tunnel_register()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 14 Jan 2023 03:01:37 +0000 (19:01 -0800)]
l2tp: close all race conditions in l2tp_tunnel_register()
The code in l2tp_tunnel_register() is racy in several ways:
1. It modifies the tunnel socket _after_ publishing it.
2. It calls setup_udp_tunnel_sock() on an existing socket without
locking.
3. It changes sock lock class on fly, which triggers many syzbot
reports.
This patch amends all of them by moving socket initialization code
before publishing and under sock lock. As suggested by Jakub, the
l2tp lockdep class is not necessary as we can just switch to
bh_lock_sock_nested().
Fixes: 37159ef2c1ae ("l2tp: fix a lockdep splat") Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation") Reported-by: syzbot+52866e24647f9a23403f@syzkaller.appspotmail.com Reported-by: syzbot+94cc2a66fc228b23f360@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 14 Jan 2023 03:01:36 +0000 (19:01 -0800)]
l2tp: convert l2tp_tunnel_list to idr
l2tp uses l2tp_tunnel_list to track all registered tunnels and
to allocate tunnel ID's. IDR can do the same job.
More importantly, with IDR we can hold the ID before a successful
registration so that we don't need to worry about late error
handling, it is not easy to rollback socket changes.
This is a preparation for the following fix.
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach [Sat, 14 Jan 2023 12:04:37 +0000 (13:04 +0100)]
net: stmmac: Fix queue statistics reading
Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.
Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:
Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Rameshbabu [Fri, 13 Jan 2023 00:55:29 +0000 (16:55 -0800)]
sch_htb: Avoid grafting on htb_destroy_class_offload when destroying htb
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
====================
mptcp: userspace pm: create sockets for the right family
Before these patches, the Userspace Path Manager would allow the
creation of subflows with wrong families: taking the one of the MPTCP
socket instead of the provided ones and resulting in the creation of
subflows with likely not the right source and/or destination IPs. It
would also allow the creation of subflows between different families or
not respecting v4/v6-only socket attributes.
Patch 1 lets the userspace PM select the proper family to avoid creating
subflows with the wrong source and/or destination addresses because the
family is not the expected one.
Patch 2 makes sure the userspace PM doesn't allow the userspace to
create subflows for a family that is not allowed.
Patch 3 validates scenarios with a mix of v4 and v6 subflows for the
same MPTCP connection.
These patches fix issues introduced in v5.19 when the userspace path
manager has been introduced.
====================
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts [Thu, 12 Jan 2023 17:42:52 +0000 (18:42 +0100)]
mptcp: netlink: respect v4/v6-only sockets
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY
option has been set, the userspace PM would allow creating subflows
using IPv4 addresses, e.g. mapped in v6.
The kernel side of userspace PM will also accept creating subflows with
local and remote addresses having different families. Depending on the
subflow socket's family, different behaviours are expected:
- If AF_INET is forced with a v6 address, the kernel will take the last
byte of the IP and try to connect to that: a new subflow is created
but to a non expected address.
- If AF_INET6 is forced with a v4 address, the kernel will try to
connect to a v4 address (v4-mapped-v6). A -EBADF error from the
connect() part is then expected.
It is then required to check the given families can be accepted. This is
done by using a new helper for addresses family matching, taking care of
IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by
the in-kernel path-manager to use mixed IPv4 and IPv6 addresses.
While at it, a clear error message is now reported if there are some
conflicts with the families that have been passed by the userspace.
Paolo Abeni [Thu, 12 Jan 2023 17:42:51 +0000 (18:42 +0100)]
mptcp: explicitly specify sock family at subflow creation time
Let the caller specify the to-be-created subflow family.
For a given MPTCP socket created with the AF_INET6 family, the current
userspace PM can already ask the kernel to create subflows in v4 and v6.
If "plain" IPv4 addresses are passed to the kernel, they are
automatically mapped in v6 addresses "by accident". This can be
problematic because the userspace will need to pass different addresses,
now the v4-mapped-v6 addresses to destroy this new subflow.
On the other hand, if the MPTCP socket has been created with the AF_INET
family, the command to create a subflow in v6 will be accepted but the
result will not be the one as expected as new subflow will be created in
IPv4 using part of the v6 addresses passed to the kernel: not creating
the expected subflow then.
No functional change intended for the in-kernel PM where an explicit
enforcement is currently in place. This arbitrary enforcement will be
leveraged by other patches in a future version.
Clément Léger [Thu, 12 Jan 2023 16:13:11 +0000 (17:13 +0100)]
net: lan966x: add missing fwnode_handle_put() for ports node
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jisoo Jang [Wed, 11 Jan 2023 13:19:14 +0000 (22:19 +0900)]
net: nfc: Fix use-after-free in local_cleanup()
Fix a use-after-free that occurs in kfree_skb() called from
local_cleanup(). This could happen when killing nfc daemon (e.g. neard)
after detaching an nfc device.
When detaching an nfc device, local_cleanup() called from
nfc_llcp_unregister_device() frees local->rx_pending and decreases
local->ref by kref_put() in nfc_llcp_local_put().
In the terminating process, nfc daemon releases all sockets and it leads
to decreasing local->ref. After the last release of local->ref,
local_cleanup() called from local_release() frees local->rx_pending
again, which leads to the bug.
Setting local->rx_pending to NULL in local_cleanup() could prevent
use-after-free when local_cleanup() is called twice.
ethtool: add netlink attr in rss get reply only if value is not null
Current code for RSS_GET ethtool command includes netlink attributes
in reply message to user space even if they are null. Added checks
to include netlink attribute in reply message only if a value is
received from driver. Drivers might return null for RSS indirection
table or hash key. Instead of including attributes with empty value
in the reply message, add netlink attribute only if there is content.
Jakub Kicinski [Fri, 13 Jan 2023 05:50:43 +0000 (21:50 -0800)]
Merge branch 'amd-xgbe-pfc-and-kr-training-fixes'
Raju Rangoju says:
====================
amd-xgbe: PFC and KR-Training fixes
This patch series fixes the issues in kr-training and pfc
0001 - There is difference in the TX Flow Control registers (TFCR)
between the revisions of the hardware. Update the driver to use the
TFCR based on the reported version of the hardware.
0002 - AN restart triggered during KR training not only aborts the KR
training process but also move the HW to unstable state. Add the
necessary changes to fix kr-taining.
====================
Raju Rangoju [Wed, 11 Jan 2023 17:28:52 +0000 (22:58 +0530)]
amd-xgbe: Delay AN timeout during KR training
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Rangoju [Wed, 11 Jan 2023 17:28:51 +0000 (22:58 +0530)]
amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent
There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.
Update the driver to use the TFCR based on the reported version of the
hardware.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 13 Jan 2023 04:01:44 +0000 (20:01 -0800)]
Merge tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some fixes, stack only for now:
* iTXQ conversion fixes, various bugs reported
* properly reset multiple BSSID settings
* fix for a link_sta crash
* fix for AP VLAN checks
* fix for MLO address translation
* tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix MLO + AP_VLAN check
mac80211: Fix MLO address translation for multiple bss case
wifi: mac80211: reset multiple BSSID options in stop_ap()
wifi: mac80211: Fix iTXQ AMPDU fragmentation handling
wifi: mac80211: sdata can be NULL during AMPDU start
wifi: mac80211: Proper mark iTXQs for resumption
wifi: mac80211: fix initialization of rx->link and rx->link_sta
====================
Linus Torvalds [Fri, 13 Jan 2023 00:20:44 +0000 (18:20 -0600)]
Merge tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
Linus Torvalds [Thu, 12 Jan 2023 23:09:20 +0000 (17:09 -0600)]
Merge tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Add various missing READ_ONCE() to cmpxchg() loops prevent the
compiler from potentially generating incorrect code. This includes a
rather large change to the s390 specific hardware sampling code and
its current use of cmpxchg_double().
Do the fix now to get it out of the way of Peter Zijlstra's
cmpxchg128() work, and have something that can be backported. The
added new code includes a private 128 bit cmpxchg variant which will
be removed again after Peter's rework is available. Also note that
this 128 bit cmpxchg variant is used to implement 128 bit
READ_ONCE(), while strictly speaking it wouldn't be necessary, and
_READ_ONCE() should also be sufficient; even though it isn't obvious
for all converted locations that this is the case. Therefore use this
implementation for for the sake of clarity and consistency for now.
- Fix ipl report address handling to avoid kdump failures/hangs.
- Fix misuse of #(el)if in kernel decompressor.
- Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36,
caused by the recently changed discard behaviour.
- Make sure _edata and _end symbols are always page aligned.
- The current header guard DEBUG_H in one of the s390 specific header
files is too generic and conflicts with the ath9k wireless driver.
Add an _ASM_S390_ prefix to the guard to make it unique.
- Update defconfigs.
* tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
s390/kexec: fix ipl report address for kdump
s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
s390: expicitly align _edata and _end symbols on page boundary
s390/debug: add _ASM_S390_ prefix to header guard
Linus Torvalds [Thu, 12 Jan 2023 23:02:20 +0000 (17:02 -0600)]
Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
Linus Torvalds [Thu, 12 Jan 2023 22:47:32 +0000 (16:47 -0600)]
Merge tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events hw enablement from Ingo Molnar:
- More hardware-enablement for Intel Meteor Lake & Emerald Rapid
systems: pure model ID enumeration additions that do not affect other
systems.
* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add Emerald Rapids
perf/x86/msr: Add Emerald Rapids
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
Linus Torvalds [Thu, 12 Jan 2023 22:39:43 +0000 (16:39 -0600)]
Merge tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix scheduler frequency invariance bug related to overly long
tickless periods triggering an integer overflow and disabling the
feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling
kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
solution here - we looked at patches to free the structure after the
pi_lock got dropped, but that looked quite a bit messier - and none
of this is truly performance critical. We can revisit this if it's
too lazy of a solution ...
* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Use kfree_rcu() in do_set_cpus_allowed()
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
sched/core: Fix arch_scale_freq_tick() on tickless systems
Linus Torvalds [Thu, 12 Jan 2023 20:38:22 +0000 (14:38 -0600)]
Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
Andre Przywara [Wed, 11 Jan 2023 13:32:28 +0000 (13:32 +0000)]
r8152: add vendor/device ID pair for Microsoft Devkit
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.
Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Linus Torvalds [Thu, 12 Jan 2023 12:10:45 +0000 (06:10 -0600)]
Merge tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
- Fixes for long standing issues with accesses to spidev->spi during
teardown in the spidev userspace driver.
- Rename the newly added spi-cs-setup-ns DT property to be more in line
with our other delay properties before it becomes ABI.
- A few driver specific fixes.
* tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: remove debug messages that access spidev->spi without locking
spi: spidev: fix a race condition when accessing spidev->spi
spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns
spi: cadence: Fix busy cycles calculation
spi: mediatek: Enable irq before the spi registration
Linus Torvalds [Thu, 12 Jan 2023 11:59:37 +0000 (05:59 -0600)]
Merge tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small driver specific fixes, one of which I queued for 6.1
but didn't actually send out so has had *plenty* of testing in -next"
* tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo
regulator: da9211: Use irq handler when ready
Linus Torvalds [Thu, 12 Jan 2023 11:50:56 +0000 (05:50 -0600)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten small fixes (less the one that cleaned up a reverted removal),
nine in drivers of which the ufs one is the most critical.
The single core patch is a minor speedup to error handling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort()
scsi: hisi_sas: Fix tag freeing for reserved tags
scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery
scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0()
scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile
scsi: core: scsi_error: Do not queue pointless abort workqueue functions
scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
scsi: mpi3mr: Remove usage of dma_get_required_mask() API
scsi: mpt3sas: Remove usage of dma_get_required_mask() API
net: stmmac: add aux timestamps fifo clearance wait
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit
(ATSFC) to clear. This is to ensure no residue fifo value is being read
erroneously.
Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Jan 2023 04:50:42 +0000 (20:50 -0800)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf)
This series contains updates to ixgbe, igc, and iavf drivers.
Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking
on ixgbe.
Christopher adds setting of Toggle on Target Time bits for proper
pulse per second (PPS) synchronization for igc.
Daniil Tatianin fixes, likely, copy/paste issue that misreported
destination instead of source for IP mask for iavf error.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
====================
Jakub Kicinski [Wed, 11 Jan 2023 04:25:47 +0000 (20:25 -0800)]
bnxt: make sure we return pages to the pool
Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).
After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.
Same commit added the same bug in the new bnxt_rx_multi_page_skb().
Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jie Wang [Tue, 10 Jan 2023 11:53:59 +0000 (19:53 +0800)]
net: hns3: fix wrong use of rss size during VF rss config
Currently, it used old rss size to get current tc mode. As a result, the
rss size is updated, but the tc mode is still configured based on the old
rss size.
So this patch fixes it by using the new rss size in both process.
Fixes: 93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 11 Jan 2023 23:12:14 +0000 (17:12 -0600)]
Merge tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Make 'perf kmem' cope with the removal of some
kmem:kmem_cache_alloc_node and kmem:kmalloc_node in the 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") commit, making sure it works with Linux >= 6.2 as well
as with older kernels where those tracepoints are present.
- Also make it handle the new "node" kmem:kmalloc and
kmem:kmem_cache_alloc tracepoint field introduced in that same
commit.
- Fix hardware tracing PMU address filter duplicate symbol selection,
that was preventing to match with static functions with the same name
present in different object files.
- Fix regression on what linux/types.h file gets used to build the "BPF
prologue" 'perf test' entry, the system one lacks the fmode_t
definition used in this test, so provide that type in the test
itself.
- Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1. If the
user asks for linking with the libbpf package provided by the distro,
then it has to be >= 0.8.0. Using the libbpf supplied with the kernel
would be a fallback in that case.
- Fix the build when libbpf isn't available or explicitly disabled via
NO_LIBBPF=1.
- Don't try to install libtraceevent plugins as its not anymore in the
kernel sources and will thus always fail.
* tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf auxtrace: Fix address filter duplicate symbol selection
perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1
perf build: Fix build error when NO_LIBBPF=1
perf tools: Don't install libtraceevent plugins as its not anymore in the kernel sources
perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring
perf kmem: Support legacy tracepoints
perf build: Properly guard libbpf includes
perf tests bpf prologue: Fix bpf-script-test-prologue test compile issue with clang
netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.
Gavrilov Ilia [Wed, 11 Jan 2023 11:57:39 +0000 (11:57 +0000)]
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters") Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Heiko Carstens [Mon, 9 Jan 2023 10:51:20 +0000 (11:51 +0100)]
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Thu, 5 Jan 2023 14:44:20 +0000 (15:44 +0100)]
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Mark Brown [Wed, 11 Jan 2023 14:15:22 +0000 (14:15 +0000)]
spi: Merge rename of spi-cs-setup-ns DT property
The newly added spi-cs-setup-ns doesn't really fit with the existing
property names for delays, rename it so that it does before it makes it
into a release and becomes ABI.
spi: spidev: remove debug messages that access spidev->spi without locking
The two debug messages in spidev_open() dereference spidev->spi without
taking the lock and without checking if it's not null. This can lead to
a crash. Drop the messages as they're not needed - the user-space will
get informed about ENOMEM with the syscall return value.
spi: spidev: fix a race condition when accessing spidev->spi
There's a spinlock in place that is taken in file_operations callbacks
whenever we check if spidev->spi is still alive (not null). It's also
taken when spidev->spi is set to NULL in remove().
This however doesn't protect the code against driver unbind event while
one of the syscalls is still in progress. To that end we need a lock taken
continuously as long as we may still access spidev->spi. As both the file
ops and the remove callback are never called from interrupt context, we
can replace the spinlock with a mutex.
Herbert Xu [Tue, 10 Jan 2023 00:59:06 +0000 (08:59 +0800)]
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
Previously in commit d66d6c3152e8 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Linus Torvalds [Tue, 10 Jan 2023 21:03:06 +0000 (15:03 -0600)]
Merge tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
* tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Use set_bit(RQ_DROPME)
Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"
nfsd: fix handling of cached open files in nfsd4_open codepath
Linus Torvalds [Tue, 10 Jan 2023 20:48:12 +0000 (14:48 -0600)]
Merge tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix xtensa allmodconfig build broken by the kcsan test
- drop unused members of struct thread_struct
* tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: drop unused members of struct thread_struct
kcsan: test: don't put the expect array on the stack
igc: Fix PPS delta between two synchronized end-points
This patch fix the pulse per second output delta between
two synchronized end-points.
Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.
How to test:
1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>
2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant
3) Measure the output using analyzer for both end-points
Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225") Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Yang Yingliang [Tue, 29 Nov 2022 01:57:48 +0000 (09:57 +0800)]
ixgbe: fix pci device refcount leak
As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().
In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak.
Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In 746bd29e348f99b4 ("perf build: Use tools/lib headers from install
path") we stopped having the tools/lib/ directory from the kernel
sources in the header include path unconditionally, which breaks the
build on systems with older versions of libbpf-devel, in this case 0.7.0
as some of the structures and function declarations present in the newer
version of libbpf included in the kernel sources (tools/lib/bpf) are not
anymore used, just the ones in the system libbpf.
So instead of trying to provide alternative functions when the
libbpf-bpf_program__set_insns feature test fails, fail a
LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and
emit this build error message:
$ make LIBBPF_DYNAMIC=1 -C tools/perf
Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop.
$
For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a
minimal version for using LIBBPF_DYNAMIC=1, most distros should have it
by now or at v6.3 time.
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 6 Jan 2023 15:13:20 +0000 (07:13 -0800)]
perf build: Fix build error when NO_LIBBPF=1
The $(LIBBPF) target should only be a dependency of prepare if the
static version of libbpf is needed. Add a new LIBBPF_STATIC variable
that is set by Makefile.config. Use LIBBPF_STATIC to determine whether
the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare
dependency.
As Makefile.config isn't loaded for "clean" as a target, always set
LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This
is done to minimize conditional logic for $(LIBBPF)-clean.
This issue and an original fix was reported by Mike Leach in:
https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230106151320.619514-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools: Don't install libtraceevent plugins as its not anymore in the kernel sources
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sun, 8 Jan 2023 06:24:00 +0000 (14:24 +0800)]
perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") adds the field "node" into the tracepoints 'kmalloc' and
'kmem_cache_alloc', so this patch modifies the event process function to
support the field "node".
If field "node" is detected by checking function evsel__field(), it
stats the cross allocation.
When the "node" value is NUMA_NO_NODE (-1), it means the memory can be
allocated from any memory node, in this case, we don't account it as a
cross allocation.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sun, 8 Jan 2023 06:23:59 +0000 (14:23 +0800)]
perf kmem: Support legacy tracepoints
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") removed tracepoints 'kmalloc_node' and
'kmem_cache_alloc_node', we need to consider the tool should be backward
compatible.
If it detect the tracepoint "kmem:kmalloc_node", this patch enables the
legacy tracepoints, otherwise, it will ignore them.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 6 Jan 2023 15:13:19 +0000 (07:13 -0800)]
perf build: Properly guard libbpf includes
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Felix Fietkau [Wed, 14 Dec 2022 13:03:26 +0000 (14:03 +0100)]
wifi: mac80211: fix MLO + AP_VLAN check
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was
preventing adding more than one 4-addr AP_VLAN regardless of the MLO status.
Fix this by adding missing extra checks.
Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sriram R [Thu, 8 Dec 2022 04:00:50 +0000 (09:30 +0530)]
mac80211: Fix MLO address translation for multiple bss case
When multiple interfaces are present in the local interface
list, new skb copy is taken before rx processing except for
the first interface. The address translation happens each
time only on the original skb since the hdr pointer is not
updated properly to the newly created skb.
As a result frames start to drop in userspace when address
based checks or search fails.
Alexander Wetzel [Fri, 30 Dec 2022 12:18:49 +0000 (13:18 +0100)]
wifi: mac80211: Proper mark iTXQs for resumption
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Fri, 30 Dec 2022 20:07:47 +0000 (21:07 +0100)]
wifi: mac80211: fix initialization of rx->link and rx->link_sta
There are some codepaths that do not initialize rx->link_sta properly. This
causes a crash in places which assume that rx->link_sta is valid if rx->sta
is valid.
One known instance is triggered by __ieee80211_rx_h_amsdu being called from
fast-rx. It results in a crash like this one:
Since the initialization of rx->link and rx->link_sta is rather convoluted
and duplicated in many places, clean it up by using a helper function to
set it.
Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Fixes: b320d6c456ff ("wifi: mac80211: use correct rx link_sta instead of default") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221230200747.19040-1-nbd@nbd.name
[remove unnecessary rx->sta->sta.mlo check] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Tue, 10 Jan 2023 11:34:13 +0000 (05:34 -0600)]
Merge tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmb server fixes from Steve French:
- fix possible infinite loop in socket handler
- fix possible panic in ntlmv2 authentication
- fix error handling on tree connect
* tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix infinite loop in ksmbd_conn_handler_loop()
ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob
ksmbd: send proper error response in smb2_tree_connect()
octeontx2-pf: Fix resource leakage in VF driver unbind
resources allocated like mcam entries to support the Ntuple feature
and hash tables for the tc feature are not getting freed in driver
unbind. This patch fixes the issue.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
selftests/net: Isolate l2_tos_ttl_inherit.sh in its own netns.
l2_tos_ttl_inherit.sh uses a veth pair to run its tests, but only one
of the veth interfaces runs in a dedicated netns. The other one remains
in the initial namespace where the existing network configuration can
interfere with the setup used for the tests.
Isolate both veth devices in their own netns and ensure everything gets
cleaned up when the script exits.
Guillaume Nault [Sun, 8 Jan 2023 15:45:50 +0000 (16:45 +0100)]
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Guillaume Nault [Sun, 8 Jan 2023 15:45:46 +0000 (16:45 +0100)]
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Emeel Hakim [Sun, 11 Dec 2022 11:22:23 +0000 (13:22 +0200)]
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Emeel Hakim [Wed, 14 Dec 2022 14:34:13 +0000 (16:34 +0200)]
net/mlx5e: Fix macsec ssci attribute handling in offload path
Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shay Drory [Thu, 15 Dec 2022 13:33:38 +0000 (15:33 +0200)]
net/mlx5: E-switch, Coverity: overlapping copy
When a capability is set via port function caps callbacks, a memcpy() is
performed in which the source and the target are the same address, e.g.:
the copy is redundant. Hence, Remove it.
Discovered by Coverity.
Fixes: 7db98396ef45 ("net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE") Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Oz Shlomo [Wed, 7 Dec 2022 11:05:02 +0000 (11:05 +0000)]
net/mlx5e: TC, ignore match level for post meter rules
The post meter table only matches on reg_c5. As such, the inner/outer
match levels are irrelevant for the match critieria. The cited patch only
sets the outer criteria to none, thus setting the inner match level for
encapsulated packets. This caused rules with police action on tunnel
devices to not find an existing flow group for the match criteria, thus
failing to offload the rule.
Set both the inner and outer match levels to none for post_meter rules.
Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dragos Tatulea [Wed, 23 Nov 2022 14:59:13 +0000 (16:59 +0200)]
net/mlx5e: IPoIB, Fix child PKEY interface stats on rx path
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
Dragos Tatulea [Fri, 25 Nov 2022 15:51:19 +0000 (17:51 +0200)]
net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
Dragos Tatulea [Thu, 15 Dec 2022 11:02:38 +0000 (13:02 +0200)]
net/mlx5e: IPoIB, Block queue count configuration when sub interfaces are present
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
Roy Novich [Wed, 4 Jan 2023 09:16:21 +0000 (11:16 +0200)]
net/mlx5e: Verify dev is present for fix features ndo
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Moshe Shemesh [Mon, 28 Nov 2022 17:05:47 +0000 (19:05 +0200)]
net/mlx5: Fix command stats access after free
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Ariel Levkovich [Mon, 29 Aug 2022 21:32:30 +0000 (00:32 +0300)]
net/mlx5e: TC, Keep mod hdr actions after mod hdr alloc
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
projects / mirror_ubuntu-kernels.git / log