Konrad Dybcio [Thu, 23 Feb 2023 10:51:59 +0000 (11:51 +0100)]
drm/msm/adreno: Use OPP for every GPU generation
Some older GPUs (namely a2xx with no opp tables at all and a320 with
downstream-remnants gpu pwrlevels) used not to have OPP tables. They
both however had just one frequency defined, making it extremely easy
to construct such an OPP table from within the driver if need be.
Do so and switch all clk_set_rate calls on core_clk to their OPP
counterparts.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523784/ Link: https://lore.kernel.org/r/20230223-topic-opp-v3-3-5f22163cd1df@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Akhil P Oommen [Mon, 2 Jan 2023 10:48:31 +0000 (16:18 +0530)]
drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse
As per the recommended recovery sequence of adreno gpu, cx gdsc should
collapse at hardware before it is turned back ON. This helps to clear
out the stale states in hardware before it is reinitialized. Use the
genpd notifier along with the newly introduced
dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed
before we turn it back ON.
Akhil P Oommen [Mon, 2 Jan 2023 10:48:30 +0000 (16:18 +0530)]
drm/msm/a6xx: Remove cx gdsc polling using 'reset'
Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.
This effectively reverts commit 1f6cca404918
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").
Akhil P Oommen [Mon, 2 Jan 2023 10:48:29 +0000 (16:18 +0530)]
drm/msm/a6xx: Vote for cx gdsc from gpu driver
When a device has multiple power domains, dev->power_domain is left
empty during probe. That didn't cause any issue so far because we are
freeloading on smmu driver's vote on cx gdsc. Instead of that, create
a device_link between cx genpd device and gmu device to keep a vote from
gpu driver.
Before this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
After this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
/devices/genpd:0:3d6a000.gmu active 0
Dave Airlie [Tue, 14 Mar 2023 02:17:27 +0000 (12:17 +1000)]
Merge tag 'drm-misc-next-2023-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Vinod Polimera [Thu, 2 Mar 2023 16:33:16 +0000 (22:03 +0530)]
drm/msm/disp/dpu: update dpu_enc crtc state on crtc enable/disable during self refresh
Populate the enocder software structure to reflect the updated
crtc appropriately during crtc enable/disable for a new commit
while taking care of the self refresh transitions when crtc
disable is triggered from the drm self refresh library.
Vinod Polimera [Thu, 2 Mar 2023 16:33:15 +0000 (22:03 +0530)]
drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.
Vinod Polimera [Thu, 2 Mar 2023 16:33:13 +0000 (22:03 +0530)]
drm/msm/dp: use the eDP bridge ops to validate eDP modes
The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support for eDP, we started using a new set of eDP
bridge ops. We are moving the eDP specific code in the
dp_bridge_mode_valid function to a new eDP function,
edp_bridge_mode_valid under the eDP bridge ops.
Vinod Polimera [Thu, 2 Mar 2023 16:33:12 +0000 (22:03 +0530)]
drm/msm/dp: Add basic PSR support for eDP
Add support for basic panel self refresh (PSR) feature for eDP.
Add a new interface to set PSR state in the sink from DPU.
Program the eDP controller to issue PSR enter and exit SDP to
the sink.
Vinod Polimera [Thu, 2 Mar 2023 16:33:11 +0000 (22:03 +0530)]
drm/msm/dp: use atomic callbacks for DP bridge ops
Use atomic variants for DP bridge callback functions so that
the atomic state can be accessed in the interface drivers.
The atomic state will help the driver find out if the display
is in self refresh state.
Vinod Polimera [Thu, 2 Mar 2023 16:33:10 +0000 (22:03 +0530)]
drm/msm/disp/dpu: reset the datapath after timing engine disable
Reset the datapath after disabling the timing gen, such that
it can start on a clean slate when the intf is enabled back.
This was a recommended sequence from the DPU HW programming guide.
Vinod Polimera [Thu, 2 Mar 2023 16:33:09 +0000 (22:03 +0530)]
drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled
There can be a race between timing gen disable and vblank irq. The
wait post timing gen disable may return early but intf disable sequence
might not be completed. Ensure that, intf status is disabled before
we retire the function.
Vinod Polimera [Thu, 2 Mar 2023 16:33:08 +0000 (22:03 +0530)]
drm/msm/disp/dpu: get timing engine status from intf status register
Recommended way of reading the interface timing gen status is via
status register. Timing gen status register will give a reliable status
of the interface especially during ON/OFF transitions. This support was
added from DPU version 5.0.0.
Vinod Polimera [Thu, 2 Mar 2023 16:33:06 +0000 (22:03 +0530)]
drm/bridge: add psr support for panel bridge callbacks
This change will handle the psr entry exit cases in the panel
bridge atomic callback functions. For example, the panel power
should not turn off if the panel is entering psr.
Vinod Polimera [Thu, 2 Mar 2023 16:33:04 +0000 (22:03 +0530)]
drm: add helper functions to retrieve old and new crtc
Add new helper functions, drm_atomic_get_old_crtc_for_encoder
and drm_atomic_get_new_crtc_for_encoder to retrieve the
corresponding crtc for the encoder.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/524718/ Link: https://lore.kernel.org/r/1677774797-31063-2-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Linus Torvalds [Sun, 12 Mar 2023 23:15:36 +0000 (16:15 -0700)]
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Morten Linderud [Wed, 15 Feb 2023 09:25:52 +0000 (10:25 +0100)]
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Linus Torvalds [Sun, 12 Mar 2023 16:47:08 +0000 (09:47 -0700)]
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Linus Torvalds [Sun, 12 Mar 2023 16:17:30 +0000 (09:17 -0700)]
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Linus Torvalds [Sun, 12 Mar 2023 16:12:03 +0000 (09:12 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Linus Torvalds [Sun, 12 Mar 2023 16:04:28 +0000 (09:04 -0700)]
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Linus Torvalds [Sun, 12 Mar 2023 16:00:54 +0000 (09:00 -0700)]
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Linus Torvalds [Sun, 12 Mar 2023 15:55:55 +0000 (08:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Linus Torvalds [Sun, 12 Mar 2023 15:52:03 +0000 (08:52 -0700)]
cpumask: relax sanity checking constraints
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Linus Torvalds [Sat, 11 Mar 2023 17:24:05 +0000 (09:24 -0800)]
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Zhihao Cheng [Wed, 8 Mar 2023 03:26:43 +0000 (11:26 +0800)]
ext4: zero i_disksize when initializing the bootloader inode
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
Ye Bin [Tue, 7 Mar 2023 06:17:03 +0000 (14:17 +0800)]
ext4: make sure fs error flag setted before clear journal error
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Ye Bin [Tue, 7 Mar 2023 06:17:02 +0000 (14:17 +0800)]
ext4: commit super block if fs record error when journal record without error
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Theodore Ts'o [Wed, 8 Mar 2023 04:15:49 +0000 (23:15 -0500)]
ext4, jbd2: add an optimized bmap for the journal inode
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 01:52:52 +0000 (09:52 +0800)]
ext4: move where set the MAY_INLINE_DATA flag is set
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Linus Torvalds [Sat, 11 Mar 2023 04:45:53 +0000 (20:45 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
Linus Torvalds [Sat, 11 Mar 2023 04:06:49 +0000 (20:06 -0800)]
Merge tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix a regression in exclusive mode handling of the partition code,
introduced in this merge windoe (Yu)
- Fix for a use-after-free in BFQ (Yu)
- Add sysfs documentation for the 'hidden' attribute (Sagi)
* tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux:
block, bfq: fix uaf for 'stable_merge_bfqq'
docs: sysfs-block: document hidden sysfs entry
block: fix wrong mode for blkdev_put() from disk_scan_partitions()
Linus Torvalds [Sat, 11 Mar 2023 03:09:18 +0000 (19:09 -0800)]
Merge tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
kunmap_local_page()+put_page() combinations. We can keep inventing
names for identical inline helpers, but it's getting rather
inconvenient. I've added a trivial helper to linux/highmem.h instead.
I would've held that back until the merge window, if not for the mess
it causes in tree topology - I've several branches merging from that
one, and it's only going to get worse if e.g. ext2 stuff gets picked
by Jan"
* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: put_and_unmap_page()
Linus Torvalds [Sat, 11 Mar 2023 03:04:10 +0000 (19:04 -0800)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"pick_file() speculation fix + fix for alpha mis(merge,cherry-pick)
The fs/file.c one is a genuine missing speculation barrier in
pick_file() (reachable e.g. via close(2)). The alpha one is strictly
speaking not a bug fix, but only because confusion between
preempt_enable() and preempt_disable() is harmless on architecture
without CONFIG_PREEMPT.
Looks like alpha.git picked the wrong version of patch - that braino
used to be there in early versions, but it had been fixed quite a
while ago..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: prevent out-of-bounds array speculation when closing a file descriptor
alpha: fix lazy-FPU mis(merged/applied/whatnot)
Linus Torvalds [Fri, 10 Mar 2023 17:19:30 +0000 (09:19 -0800)]
Merge tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- RISC-V architecture-specific ELF attributes have been disabled in the
kernel builds
- A fix for a locking failure while during errata patching that
manifests on SiFive-based systems
- A fix for a KASAN failure during stack unwinding
- A fix for some lockdep failures during text patching
* tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't check text_mutex during stop_machine
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
RISC-V: fix taking the text_mutex twice during sifive errata patching
RISC-V: Stop emitting attributes
Linus Torvalds [Fri, 10 Mar 2023 16:57:46 +0000 (08:57 -0800)]
Merge tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes.
msm and amdgpu are the vast majority of these, otherwise some
straggler misc from last week for nouveau and cirrus and a mailmap
update for a drm developer.
mailmap:
- add an entry
nouveau:
- fix system shutdown regression
- build warning fix
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling"
* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
drm/amdgpu: Fix the warning info when removing amdgpu device
drm/amdgpu: fix return value check in kfd
drm/amd: Fix initialization mistake for NBIO 7.3.0
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
mailmap: add mailmap entries for Faith.
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
drm/amd/display: Update clock table to include highest clock setting
drm/amd/pm: Enable ecc_info table support for smu v13_0_10
drm/amdgpu: Support umc node harvest config on umc v8_10
drm/connector: print max_requested_bpc in state debugfs
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
drm/msm/dpu: clear DSPP reservations in rm release
drm/msm/disp/dpu: fix sc7280_pp base offset
drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
...
Linus Torvalds [Fri, 10 Mar 2023 16:51:57 +0000 (08:51 -0800)]
Merge tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one reverts an improper fix which can cause an
unexpected warning more often on specific images, and another one
fixes LZMA decompression on 32-bit platforms. The others are minor
fixes and cleanups.
- Fix LZMA decompression failure on HIGHMEM platforms
- Revert an inproper fix since it is actually an implementation issue
of vmalloc()
- Avoid a wrong DBG_BUGON since it could be triggered with -EINTR
- Minor cleanups"
* tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use wrapper i_blocksize() in erofs_file_read_iter()
erofs: get rid of a useless DBG_BUGON
erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init
Linus Torvalds [Fri, 10 Mar 2023 16:45:30 +0000 (08:45 -0800)]
Merge tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Linus Torvalds [Fri, 10 Mar 2023 16:39:13 +0000 (08:39 -0800)]
Merge tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of fixes. Among them there are two updates to sysfs and
ioctl which are not strictly fixes but are used for testing so there's
no reason to delay them.
- fix block group item corruption after inserting new block group
- fix extent map logging bit not cleared for split maps after
dropping range
- fix calculation of unusable block group space reporting bogus
values due to 32/64b division
- fix unnecessary increment of read error stat on write error
- improve error handling in inode update
- export per-device fsid in DEV_INFO ioctl to distinguish seeding
devices, needed for testing
- allocator size classes:
- fix potential dead lock in size class loading logic
- print sysfs stats for the allocation classes"
* tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix block group item corruption after inserting new block group
btrfs: fix extent map logging bit not cleared for split maps after dropping range
btrfs: fix percent calculation for bg reclaim message
btrfs: fix unnecessary increment of read error stat on write error
btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode
btrfs: ioctl: return device fsid from DEV_INFO ioctl
btrfs: fix potential dead lock in size class loading logic
btrfs: sysfs: add size class stats
Linus Torvalds [Fri, 10 Mar 2023 16:31:29 +0000 (08:31 -0800)]
Merge tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Stop setting PF_NO_SETAFFINITY on io-wq workers.
This has been reported in the past as it confuses some applications,
as some of their threads will fail with -1/EINVAL if attempted
affinitized. Most recent report was on cpusets, where enabling that
with io-wq workers active will fail.
Just deal with the mask changing by checking when a worker times out,
and then exit if we have no work pending.
- Fix an issue with passthrough support where we don't properly check
if the file type has pollable uring_cmd support.
- Fix a reported W=1 warning on a variable being set and unused. Add a
special helper for iterating these lists that doesn't save the
previous list element, if that iterator never ends up using it.
* tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux:
io_uring: silence variable ‘prev’ set but not used warning
io_uring/uring_cmd: ensure that device supports IOPOLL
io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers
Linus Torvalds [Fri, 10 Mar 2023 16:18:46 +0000 (08:18 -0800)]
Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer
- Sync various tools/ copies of kernel headers with the kernel sources,
this time trying to avoid first merging with upstream to then update
but instead copy from upstream so that a merge is avoided and the end
result after merging this pull request is the one expected,
tools/perf/check-headers.sh (mostly) happy, less warnings while
building tools/perf/
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf
command line
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
--buildid-all' when that record comes with a build-id, otherwise we
end up not being able to resolve symbols
- Don't use comma as the CSV output separator the "stat+csv_output"
test, as comma can appear on some tests as a modifier for an event,
use @ instead, ditto for the JSON linter test
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for
this specific 'perf test', fix it
* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
perf stat: Fix counting when initial delay configured
tools headers svm: Sync svm headers with the kernel sources
perf test: Avoid counting commas in json linter
perf tests stat+csv_output: Switch CSV separator to @
perf inject: Fix --buildid-all not to eat up MMAP2
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf test: Fix offcpu test prev_state check
lyndonli [Fri, 3 Mar 2023 06:55:05 +0000 (14:55 +0800)]
drm/amdgpu: Fix the warning info when removing amdgpu device
Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.
When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
drm_dev_unplug
amdgpu_driver_unload_kms
amdgpu_device_fini_hw
amdgpu_device_ip_fini_early
psp_hw_fini
psp_ras_terminate
psp_ta_unloadye
psp_cmd_submit_buf
Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shashank Sharma [Mon, 27 Feb 2023 14:42:28 +0000 (15:42 +0100)]
drm/amdgpu: fix return value check in kfd
This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.
Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed") Acked-by: Christian Koenig <chriatian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Fix initialization mistake for NBIO 7.3.0
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Conor Dooley [Fri, 3 Mar 2023 14:37:55 +0000 (14:37 +0000)]
RISC-V: Don't check text_mutex during stop_machine
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
Fixes: c15ac4fd60d5 ("riscv/ftrace: Add dynamic function tracer support") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Wed, 8 Mar 2023 09:16:39 +0000 (10:16 +0100)]
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
Seth Forshee [Thu, 9 Mar 2023 20:39:09 +0000 (14:39 -0600)]
filelocks: use mount idmapping for setlease permission check
A user should be allowed to take out a lease via an idmapped mount if
the fsuid matches the mapped uid of the inode. generic_setlease() is
checking the unmapped inode uid, causing these operations to be denied.
Fix this by comparing against the mapped inode uid instead of the
unmapped uid.
The i2cdev_{at,de}tach_adapter() callbacks are used for two purposes:
1. As notifier callbacks, when (un)registering I2C adapters created or
destroyed after i2c_dev_init(),
2. As bus iterator callbacks, for registering already existing
adapters from i2c_dev_init(), and for cleanup.
Unfortunately both use cases expect different return values: the former
expects NOTIFY_* return codes, while the latter expects zero or error
codes, and aborts in case of error.
Hence in case 2, as soon as i2cdev_{at,de}tach_adapter() returns
(non-zero) NOTIFY_OK, the bus iterator aborts. This causes (a) only the
first already existing adapter to be registered, leading to missing
/dev/i2c-* entries, and (b) a failure to unregister all but the first
I2C adapter during cleanup.
Fix this by introducing separate callbacks for the bus iterator,
wrapping the notifier functions, and always returning succes.
Any errors inside these callback functions are unlikely to happen, and
are fatal anyway.
Uwe Kleine-König [Sun, 26 Feb 2023 22:26:52 +0000 (23:26 +0100)]
i2c: Switch .probe() to not take an id parameter
Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.
Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Dave Airlie [Thu, 9 Mar 2023 19:52:09 +0000 (05:52 +1000)]
Merge tag 'drm-msm-fixes-2023-03-09' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc2
- Fix for possible invalid ptr free in submit ioctl syncobj cleanup path.
- Synchronize GMU removal in driver teardown path
- a5xx preemption fixes
- Fix runpm imbalance at unbind
- DPU hw catalog fixes:
- set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset
where the PERIPH_0 block of registers is not there
- fix the DPU features supported in QCM2290 by comparing it with the
downstream device tree
- fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc
- fix the max mixer line width for sm6115 and qcm2290 chipsets in the
DPU catalog
- fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350
and sm6115. This was incorrectly populated on the SW version of the
scaler library and not the scaler HW version
- Drop dim layer support for msm8998 as its not indicated to be
supported in the downstream DTSI
- fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks
- Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR*
for all chipsets for the DMA sspp blocks
- fix the ping-pong block base address for sc7280 in the DPU HW catalog
- Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function
as it was causing a negative left shift by protecting against an invalid
index
- Clear the DSPP reservations in dpu_rm_release(). This was missed out and
as as result the DSPP was not released from the resource manager global
state.
- eth: bnxt_en: fix the double free during device removal
- tools: ynl:
- fix enum-as-flags in the generic CLI
- fully inherit attrs in subsets
- re-license uniformly under GPL-2.0 or BSD-3-clause
Previous releases - regressions:
- core: use indirect calls helpers for sk_exit_memory_pressure()
- tls:
- fix return value for async crypto
- avoid hanging tasks on the tx_lock
- eth: ice: copy last block omitted in ice_get_module_eeprom()
Previous releases - always broken:
- core: avoid double iput when sock_alloc_file fails
- af_unix: fix struct pid leaks in OOB support
- tls:
- fix possible race condition
- fix device-offloaded sendpage straddling records
- bpf:
- sockmap: fix an infinite loop error
- test_run: fix &xdp_frame misplacement for LIVE_FRAMES
- fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
- netfilter: tproxy: fix deadlock due to missing BH disable
- phylib: get rid of unnecessary locking
- eth: bgmac: fix *initial* chip reset to support BCM5358
- eth: nfp: fix csum for ipsec offload
- eth: mtk_eth_soc: fix RX data corruption issue
Misc:
- usb: qmi_wwan: add telit 0x1080 composition"
* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
tools: ynl: fix enum-as-flags in the generic CLI
tools: ynl: move the enum classes to shared code
net: avoid double iput when sock_alloc_file fails
af_unix: fix struct pid leaks in OOB support
eth: fealnx: bring back this old driver
net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
net: microchip: sparx5: fix deletion of existing DSCP mappings
octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
net/smc: fix fallback failed while sendmsg with fastopen
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
mailmap: update entries for Stephen Hemminger
mailmap: add entry for Maxim Mikityanskiy
nfc: change order inside nfc_se_io error path
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
net: usb: qmi_wwan: add Telit 0x1080 composition
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
netfilter: conntrack: adopt safer max chain length
net: tls: fix device-offloaded sendpage straddling records
...
Linus Torvalds [Thu, 9 Mar 2023 18:17:23 +0000 (10:17 -0800)]
Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
Linus Torvalds [Thu, 9 Mar 2023 18:08:46 +0000 (10:08 -0800)]
Merge tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Fix systems with memory at end of 32-bit address space
- Fix initrd on systems where memory does not start at address zero
- Fix 68030 handling of bus errors for addresses in exception tables
* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Only force 030 bus error if PC not in exception table
m68k: mm: Move initrd phys_to_virt handling after paging_init()
m68k: mm: Fix systems with memory at end of 32-bit address space
Al Viro [Mon, 6 Mar 2023 01:20:30 +0000 (01:20 +0000)]
sh: sanitize the flags on sigreturn
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Jens Axboe [Thu, 9 Mar 2023 16:51:13 +0000 (09:51 -0700)]
io_uring: silence variable ‘prev’ set but not used warning
If io_uring.o is built with W=1, it triggers a warning:
io_uring/io_uring.c: In function ‘__io_submit_flush_completions’:
io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
1502 | struct io_wq_work_node *node, *prev;
| ^~~~
which is due to the wq_list_for_each() iterator always keeping a 'prev'
variable. Most users need this to remove an entry from a list, for
example, but __io_submit_flush_completions() never does that.
Add a basic helper that doesn't track prev instead, and use that in
that function.
Jens Axboe [Wed, 8 Mar 2023 16:26:13 +0000 (09:26 -0700)]
io_uring/uring_cmd: ensure that device supports IOPOLL
It's possible for a file type to support uring commands, but not
pollable ones. Hence before issuing one of those, we should check
that it is supported and error out upfront if it isn't.
Gao Xiang [Thu, 9 Mar 2023 05:31:47 +0000 (13:31 +0800)]
erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
Let's revert commit 12724ba38992 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So
the original fix was wrong.
Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.
Now that the same hardware that the r8188eu driver supported is
supported by the real wireless driver rtl8xxxu, the r8188eu driver can
be deleted.
Also the rtl8xxxu driver supports way more devices, and is a fraction of
the overall size, making this a much better overall solution.
Thanks to the r8188eu developers and maintainers and reviewers over the
years, your work allowed Linux users to use their hardware before the
real driver was implemented properly.
Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Larry Finger <LarryFinger@lwfinger.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Acked-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
====================
tools: ynl: fix enum-as-flags in the generic CLI
The CLI needs to use proper classes when looking at Enum definitions
rather than interpreting the YAML spec ad-hoc, because we have more
than on format of the definition supported.
====================
Jakub Kicinski [Wed, 8 Mar 2023 00:39:23 +0000 (16:39 -0800)]
tools: ynl: fix enum-as-flags in the generic CLI
Lorenzo points out that the generic CLI is broken for the netdev
family. When I added the support for documentation of enums
(and sparse enums) the client script was not updated.
It expects the values in enum to be a list of names,
now it can also be a dict (YAML object).
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org> Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sock_alloc_file fails to allocate a file, it will call sock_release.
__sys_socket_file should then not call sock_release again, otherwise there
will be a double free.
Vladimir Oltean [Tue, 7 Mar 2023 15:54:11 +0000 (17:54 +0200)]
net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).
Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.
The call path that triggers the register write is:
mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
-> mt7530_pad_clk_setup()
so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.
The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.
Testing confirms that:
- the slight reordering of writes to MT7530_P6ECR and to
CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
appear to cause problems for the operation of port 6 on MT7621 and on
MT7623 (where port 5 also always worked)
- packets sent through port 5 are not corrupted anymore, regardless of
whether port 6 is enabled by phylink or not (or even present in the
device tree)
My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 38f790a80560 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.
Thanks go to Arınç for describing the problem, for debugging and for
testing.
projects / mirror_ubuntu-kernels.git / log