Eugeni Dodonov [Thu, 5 Jan 2012 11:34:28 +0000 (09:34 -0200)]
drm: give up on edid retries when i2c bus is not responding
This allows to avoid talking to a non-responding bus repeatedly until we
finally timeout after 15 attempts. We can do this by catching the -ENXIO
error, provided by i2c_algo_bit:bit_doAddress call.
Within the bit_doAddress we already try 3 times to get the edid data, so
if the routine tells us that bus is not responding, it is mostly pointless
to keep re-trying those attempts over and over again until we reach final
number of retries.
This change should fix https://bugs.freedesktop.org/show_bug.cgi?id=41059
and improve overall edid detection timing by 10-30% in most cases, and by
a much larger margin in case of phantom outputs (up to 30x in one worst
case).
Timing results for i915-powered machines for 'time xrandr' command:
Machine 1: from 0.840s to 0.290s
Machine 2: from 0.315s to 0.280s
Machine 3: from +/- 4s to 0.184s
Timing results for HD5770 with 'time xrandr' command:
Machine 4: from 3.210s to 1.060s
Reviewed-by: Chris Wilson <chris@hchris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Tested-by: Sean Finney <seanius@seanius.net> Tested-by: Soren Hansen <soren@linux2go.dk> Tested-by: Hernando Torque <sirius@sonnenkinder.org> Tested-by: Mike Lothian <mike@fireburn.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41059 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jean Delvare [Sat, 28 Jan 2012 10:08:58 +0000 (11:08 +0100)]
drm/radeon/kms: Use the standard VESA timeout for DDC channels
The VESA specification suggests a 2.2 ms timeout on DDC channels.
Use exactly that (as the i915 driver does) instead of hard-coding a
jiffy count.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jean Delvare [Sat, 28 Jan 2012 10:07:09 +0000 (11:07 +0100)]
drm/kms: Make i2c buses faster
A udelay value of 20 leads to an I2C bus running at only 25 kbps. I2C
devices can typically operate faster than this, 50 kbps should be fine
for all devices (and compliant devices can always stretch the clock if
needed.)
FWIW, the vast majority of framebuffer drivers set udelay to 10
already. So set it to 10 in DRM drivers too, this will make EDID block
reads faster. We might even lower the udelay value later if no problem
is reported.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ilija Hadzic [Tue, 31 Jan 2012 14:35:25 +0000 (09:35 -0500)]
drm/radeon/kms: remove benchmarks shorter than one page
copy_blit operation works only on integral number of pages
so benchmarks shorter than one page size (4K) do not make sense
v2: use RADEON_GPU_PAGE_SIZE instead of "magic" 1024 number and
sweep sizes between 1 * <page_size> to 16K * <page_size> doubling
the size in each iteration; we get the same coverage, as
in the original benchmark, but guarantee integer multiples
of page size
v3: add whitespace between '*' operator per review received from
zajec5@gmail.com
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm: remove master fd restriction on mode setting getters
Its useful to be able to call the mode setting getter ioctls.
Not requiring master fd, enables writing a simple program which
can query the state of the video system.
Since these ioctls are only "getters" there is no security or
synchronization issues which would require master fd. Opening
an new fd is already protected by the file permissions on the
device file.
Linus Torvalds [Thu, 2 Feb 2012 23:47:33 +0000 (15:47 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix safety of rbd_put_client()
rbd: fix a memory leak in rbd_get_client()
ceph: create a new session lock to avoid lock inversion
ceph: fix length validation in parse_reply_info()
ceph: initialize client debugfs outside of monc->mutex
ceph: change "ceph.layout" xattr to be "ceph.file.layout"
Alex Elder [Sun, 29 Jan 2012 19:57:43 +0000 (13:57 -0600)]
rbd: fix safety of rbd_put_client()
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped. The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list. It acquires node_lock
to do so, but the way it is done is still not safe.
The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.
Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:
Thread on CPU A | Thread on CPU B
--------------- | ---------------
rbd_put_client(CLIENT) | rbd_get_client()
kref_put() | (acquires node_lock)
kref->refcount becomes 0 | __rbd_client_find() returns CLIENT
calls rbd_client_release() | kref_get(&CLIENT->kref);
| (releases node_lock)
(acquires node_lock) |
deletes CLIENT from list | ...and starts using CLIENT...
(releases node_lock) |
and frees CLIENT | <-- but CLIENT gets freed here
Fix this by having rbd_put_client() acquire node_lock. The result
could still be improved, but at least it avoids this problem.
Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
This has been updated since I last sent it as the creation of the new
mm_access() function did almost exactly the same thing as parts of the
previous version of this patch did.
In order to use mm_access() even when /proc isn't enabled, we move it to
kernel/fork.c where other related process mm access functions already
are.
Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Elder [Fri, 13 Jan 2012 01:48:10 +0000 (17:48 -0800)]
ceph: create a new session lock to avoid lock inversion
Lockdep was reporting a possible circular lock dependency in
dentry_lease_is_valid(). That function needs to sample the
session's s_cap_gen and and s_cap_ttl fields coherently, but needs
to do so while holding a dentry lock. The s_cap_lock field was
being used to protect the two fields, but that can't be taken while
holding a lock on a dentry within the session.
In most cases, the s_cap_gen and s_cap_ttl fields only get operated
on separately. But in three cases they need to be updated together.
Implement a new lock to protect the spots updating both fields
atomically is required.
Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
Xi Wang [Sun, 15 Jan 2012 03:20:59 +0000 (22:20 -0500)]
ceph: fix length validation in parse_reply_info()
"len" is read from network and thus needs validation. Otherwise, given
a bogus "len" value, p+len could be an out-of-bounds pointer, which is
used in further parsing.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 14 Jan 2012 06:22:03 +0000 (22:22 -0800)]
ceph: initialize client debugfs outside of monc->mutex
Initializing debufs under monc->mutex introduces a lock dependency for
sb->s_type->i_mutex_key, which (combined with several other dependencies)
leads to an annoying lockdep warning. There's no particular reason to do
the debugfs setup under this lock, so move it out.
It used to be the case that our first monmap could come from the OSD; that
is no longer the case with recent servers, so we will reliably set up the
client entry during the initial authentication.
We don't have to worry about racing with debugfs teardown by
ceph_debugfs_client_cleanup() because ceph_destroy_client() calls
ceph_msgr_flush() first, which will wait for the message dispatch work
to complete (and the debugfs init to complete).
Fixes: #1940 Signed-off-by: Sage Weil <sage@newdream.net>
Alex Elder [Thu, 12 Jan 2012 01:41:01 +0000 (17:41 -0800)]
ceph: change "ceph.layout" xattr to be "ceph.file.layout"
The virtual extended attribute named "ceph.layout" is meaningful
only for regular files. Change its name to be "ceph.file.layout" to
more directly reflect that in the ceph xattr namespace. Preserve
the old "ceph.layout" name for the time being (until we decide it's
safe to get rid of it entirely).
Add a missing initializer for "readonly" in the terminating entry.
Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
Linus Torvalds [Thu, 2 Feb 2012 19:19:03 +0000 (11:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms/blit: fix blit copy for very large buffers
drm/radeon/kms: fix TRAVIS panel setup
drm/radeon: fix use after free in ATRM bios reading code.
drm/radeon/kms: Fix device tree linkage of DP i2c buses too
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
drm/radeon/kms: disable output polling when suspended
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
drm/nouveau/gem: fix fence_sync race / oops
drm/nouveau: fix typo on mxmdcb option
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
drm/nouveau/disp: check that panel power gpio is enabled at init time
Linus Torvalds [Thu, 2 Feb 2012 19:11:13 +0000 (11:11 -0800)]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bugs, x86: Fix printk levels for panic, softlockups and stack dumps
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf top: Fix number of samples displayed
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
x86/dumpstack: Remove unneeded check in dump_trace()
perf: Fix broken interrupt rate throttling
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
sched: Fix ancient race in do_exit()
sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
sched/s390: Fix compile error in sched/core.c
sched: Fix rq->nr_uninterruptible update race
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/reboot: Remove VersaLogic Menlow reboot quirk
x86/reboot: Skip DMI checks if reboot set by user
x86: Properly parenthesize cmpxchg() macro arguments
Ilija Hadzic [Thu, 2 Feb 2012 15:26:24 +0000 (10:26 -0500)]
drm/radeon/kms/blit: fix blit copy for very large buffers
Evergreen and NI blit copy was broken if the buffer maps to a rectangle
whose one dimension is 16384 (max dimension allowed by these chips).
In the mainline kernel, the problem is exposed only when buffers are
very large (1G), but it's still a problem. The problem could be exposed
for smaller buffers if anyone modifies the algorithm for rectangle
construction in r600_blit_create_rect() (the reason why someone would
modify that algorithm is to tune the performance of buffer moves).
The root cause was in i2f() function which only operated on range between
0 and 16383. Fix this by extending the range of i2f() function to 0 to
32767.
While at it improve the function so that the range can be easily
extended in the future (if it becomes necessary), cleanup lines
over 80 characters, and replace in-line comments with one strategic
comment that explains the crux of the function.
Credits to michel@daenzer.net for pointing out the root cause of
the bug.
v2: Fix I2F_MAX_INPUT constant definition goof and warn only once
if input argument is out of range. Edit the comment a little
bit to avoid some linguistic confusion and make it look better
in general.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 2 Feb 2012 02:30:15 +0000 (18:30 -0800)]
Merge tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
firewire fixes post v3.3-rc1
Add workarounds table entries for hardware bugs in
- FireWire part of Sound Blaster Audigy cards,
- Ricoh PCIe 1394 controllers.
Without these, several protocols, e.g. AV/C, do not work on the
Audigy, and the Ricoh PCIe controllers wouldn't work at all.
This does not concern the older Ricoh PCI controllers.
* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: disable MSI on Ricoh controllers
firewire: ohci: add reset packet quirk for SB Audigy
Randy Dunlap [Thu, 2 Feb 2012 02:15:49 +0000 (18:15 -0800)]
docbook: fix fatal errors in device-drivers docbook and add DMA Management section
Fix 2 fatal errors in the device-drivers docbook.
Also add some missing files from drivers/base/; since several
of these are DMA-related, add a section for DMA Management.
docproc: drivers/base/sys.c: No such file or directory
docproc: drivers/tty/serial/8250.c: No such file or directory
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 2 Feb 2012 00:00:38 +0000 (16:00 -0800)]
Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
lib: Fix multiple definitions of clz_tab
lib/digsig: checks for NULL return value
lib/mpi: added missing NULL check
lib/mpi: added comment on divide by 0 case
lib/mpi: check for possible zero length
lib/digsig: pkcs_1_v1_5_decode_emsa cleanup
lib/digsig: additional sanity checks against badly formated key payload
lib/mpi: removed unused functions
lib/mpi: checks for zero divisor length
lib/mpi: return error code on dividing by zero
lib/mpi: replaced MPI_NULL with normal NULL
lib/mpi: added missing NULL check
David Miller [Wed, 1 Feb 2012 22:17:55 +0000 (00:17 +0200)]
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
This copy of longlong.h is extremely dated and results in compile
errors on sparc32 when MPILIB is enabled, copy over the more uptodate
implementation from arch/sparc/math/sfp-util_32.h
Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
Linus Torvalds [Wed, 1 Feb 2012 23:18:39 +0000 (15:18 -0800)]
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
InfiniBand/RDMA fixes for 3.3:
- Fix a crash due to a regression (uninitialized refcnt) introduced in
3.2 with XRC support.
- Close race in how ucma reports events when connect fails.
- Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works.
- Fix regression in qib caused by over-aggressive PCIe tuning.
- Other small fixes for hardware drivers (ipath, nes, qib).
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/nes: Copyright update
IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
RDMA/nes: Fix fast memory registration opcode
RDMA/nes: Fix fast memory registration length
RDMA/ucma: Discard all events for new connections until accepted
IB/qib: Roll back PCIe tuning change
IB/qib: Use GFP_ATOMIC when locks are held
RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()
RDMA/nes: Fix for sending MPA reject frame
IB/ipath: Calling PTR_ERR() on right variable in create_file()
RDMA/core: Fix kernel panic by always initializing qp->usecnt
Oleg Nesterov [Tue, 31 Jan 2012 16:15:11 +0000 (17:15 +0100)]
proc: make sure mem_open() doesn't pin the target's memory
Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.
Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.
I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.
Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.
This patch fixes merge conflict resolution breakage introduced by merge d3712b9dfcf4 ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream").
The commit changed 'mtd_can_have_bb()' function and made it always
return zero, which is incorrect. Instead, we need it to return whether
the underlying flash device can have bad eraseblocks or not. UBI needs
this information because it affects how it handles the underlying flash.
E.g., if the underlying flash is NOR, it cannot have bad blocks and any
write or erase error is fatal, and all we can do is to switch to R/O
mode. We do not need to reserve a pool of good eraseblocks for bad
eraseblocks handling, and so on.
This patch also removes 'mtd_can_have_bb()' invocations from Logfs to
ensure correct Logfs behavior.
I've tested that with this patch UBI works on top of NOR and NAND
flashes emulated by mtdram and nandsim correspondingly.
This patch is based on patch from Linus Torvalds.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jörn Engel <joern@logfs.org> Acked-by: Prasad Joshi <prasadjoshi.linux@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michel Dänzer [Wed, 1 Feb 2012 11:09:55 +0000 (12:09 +0100)]
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
The value of this register is transferred to the V_COUNTER register at the
beginning of vertical blank. V_COUNTER is the reference for VLINE waits and
goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout,
so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the
beginning of vertical blank, and VLINE waits excluding the whole scanout area
could never finish (possibly only if VIEWPORT_Y_START is larger than the length
of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer
height should prevent this for any kind of VLINE wait.
CC: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Seth Forshee [Wed, 1 Feb 2012 01:06:25 +0000 (19:06 -0600)]
drm/radeon/kms: disable output polling when suspended
Polling the outputs when the device is suspended can result in erroneous
status updates. Disable output polling during suspend to prevent this
from happening.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:26 +0000 (19:13 +0200)]
lib/digsig: pkcs_1_v1_5_decode_emsa cleanup
Removed useless 'is_valid' variable in pkcs_1_v1_5_decode_emsa(),
which was inhereted from original code. Client now uses return value
to check for an error.
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:23 +0000 (19:13 +0200)]
lib/mpi: removed unused functions
do_encode_md() and mpi_get_keyid() are not parts of mpi library.
They were used early versions of gnupg and in digsig project,
but they are not used neither here nor there anymore.
Dave Airlie [Wed, 1 Feb 2012 09:36:24 +0000 (09:36 +0000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
drm/nouveau/gem: fix fence_sync race / oops
drm/nouveau: fix typo on mxmdcb option
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
drm/nouveau/disp: check that panel power gpio is enabled at init time
Dan Carpenter [Wed, 4 Jan 2012 07:20:47 +0000 (10:20 +0300)]
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
calc_mclk() returns zero on success and negative on failure but clk is
a u32.
v2: Martin Peres:
- clk should be an int, not a u32
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 10 Jan 2012 00:18:28 +0000 (10:18 +1000)]
drm/nouveau/gem: fix fence_sync race / oops
Due to a race it was possible for a fence to be destroyed while another
thread was trying to synchronise with it. If this happened in the fallback
non-semaphore path, it lead to the following oops due to fence->channel
being NULL.
Ben Skeggs [Wed, 1 Feb 2012 05:08:59 +0000 (15:08 +1000)]
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
There's at least one known case where our shadowing code is buggy, and we
fail init. Until we can be confident we're doing all this correctly, lets
succeed and risk crazy bios tables rather than failing for perfectly valid
configs too.
Linus Torvalds [Tue, 31 Jan 2012 17:23:59 +0000 (09:23 -0800)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
There are few important bug fixes for LogFS
* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
Logfs: Allow NULL block_isbad() methods
logfs: Grow inode in delete path
logfs: Free areas before calling generic_shutdown_super()
logfs: remove useless BUG_ON
MAINTAINERS: Add Prasad Joshi in LogFS maintiners
logfs: Propagate page parameter to __logfs_write_inode
logfs: set superblock shutdown flag after generic sb shutdown
logfs: take write mutex lock during fsync and sync
logfs: Prevent memory corruption
logfs: update page reference count for pined pages
Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what
"mtd->block_isbad" means in commit f2933e86ad93: "Logfs: Allow NULL
block_isbad() methods" clashing with the abstraction changes in the
commits 7086c19d0742: "mtd: introduce mtd_block_isbad interface" and d58b27ed58a3: "logfs: do not use 'mtd->block_isbad' directly".
This resolution takes the semantics from commit f2933e86ad93, and just
makes mtd_block_isbad() return zero (false) if the 'block_isbad'
function is NULL. But that also means that now "mtd_can_have_bb()"
always returns 0.
Now, "mtd_block_markbad()" will obviously return an error if the
low-level driver doesn't support bad blocks, so this is somewhat
non-symmetric, but it actually makes sense if a NULL "block_isbad"
function is considered to mean "I assume that all my blocks are always
good".
selects GENERIC_CPU_DEVICES for Microblaze which register cpu.
My patch was done in the same time that's why cpu was registered twice which
caused this warning log:
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc()
sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0'
Modules linked in:
...
Linus Torvalds [Tue, 31 Jan 2012 01:08:40 +0000 (17:08 -0800)]
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
hwmon: (sht15) fix bad error code
MAINTAINERS: Drop maintainer for MAX1668 hwmon driver
MAINTAINERS: Add hwmon entries for Wolfson
hwmon: (f71805f) Fix clamping of temperature limits
Linus Torvalds [Tue, 31 Jan 2012 01:06:26 +0000 (17:06 -0800)]
Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Here are some fixes to the pin control system that has accumulated since
-rc1. Mainly Tony Lindgren fixed the module load/unload logic and the
rest are minor fixes and documentation.
* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: add checks for empty function names
pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set
pinctrl: fix some pinmux typos
pinctrl: free debugfs entries when unloading a pinmux driver
pinctrl: unbreak error messages
Documentation/pinctrl: fix a few syntax errors in code examples
pinctrl: fix pinconf_pins_show iteration
Stephane Eranian [Mon, 30 Jan 2012 10:50:37 +0000 (11:50 +0100)]
perf top: Fix number of samples displayed
In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.
The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.
This patch fixes this.
Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian [Fri, 20 Jan 2012 09:49:12 +0000 (10:49 +0100)]
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
The event_type record has a max length for the event name.
It's called MAX_EVENT_NAME.
The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.
Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Daney [Tue, 17 Jan 2012 21:41:01 +0000 (13:41 -0800)]
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
When building on my Debian/mips system, util/util.c fails to build
because commit 1aed2671738785e8f5aea663a6fda91aa7ef59b5 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done. This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.
There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.
The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files. All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.
All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.
This gives me a clean build on x86_64 (fc12) and mips (Debian).
Cc: David Daney <david.daney@cavium.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jack Morgenstein [Thu, 26 Jan 2012 14:41:33 +0000 (16:41 +0200)]
IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
In the current code, vendor-specific MADs (e.g with the FDR-10
attribute) are silently dropped by the driver, resulting in timeouts
at the sending side and inability to query/configure the relevant
feature. However, the ConnectX firmware is able to handle such MADs.
For unsupported attributes, the firmware returns a GET_RESPONSE MAD
containing an error status.
For example, for a FDR-10 node with LID 11:
# ibstat mlx4_0 1
CA: 'mlx4_0'
Port 1:
State: Active
Physical state: LinkUp
Rate: 40 (FDR10)
Base lid: 11
LMC: 0
SM lid: 24
Capability mask: 0x02514868
Port GUID: 0x0002c903002e65d1
Link layer: InfiniBand
Extended Port Query (EPI) vendor mad timeouts before the patch:
# smpquery MEPI 11 -d
ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms)
ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms)
ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms
ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11)
smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed
EPI query works OK with the patch:
# smpquery MEPI 11 -d
ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
ibwarn: [6548] mad_rpc: data offs 64 sz 64
mad data
0000 0000 0000 0001 0000 0001 0000 0001
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
# Ext Port info: Lid 11 port 0
StateChangeEnable:...............0x00
LinkSpeedSupported:..............0x01
LinkSpeedEnabled:................0x01
LinkSpeedActive:.................0x01
Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ira Weiny <weiny2@llnl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
Linus Torvalds [Mon, 30 Jan 2012 23:17:21 +0000 (15:17 -0800)]
Merge tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Here are some tty/serial patches for 3.3-rc1
Big thing here is the movement of the 8250 serial drivers to their own
directory, now that the patch churn has calmed down.
Other than that, only minor stuff (omap patches were reverted as they
were found to be wrong), and another broken driver removed from the
system.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Kill off Moorestown code
Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode"
Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip"
serial: Fix wakeup init logic to speed up startup
docbook: don't use serial_core.h in device-drivers book
serial: amba-pl011: lock console writes against interrupts
amba-pl011: do not disable RTS during shutdown
tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip
tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode
omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP.
TTY: fix UV serial console regression
jsm: Fixed EEH recovery error
Updated TTY MAINTAINERS info
serial: group all the 8250 related code together
is unable to access attached FireWire devices when MSI is enabled but
works if MSI is disabled.
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html
Hence add the "disable MSI" quirks flag for this device, or in fact for
safety and simplicity for all current (R5U230, R5U231, R5U240) and
future Ricoh PCIe 1394 controllers.
Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com> Cc: 2.6.36+ <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Mon, 30 Jan 2012 19:38:28 +0000 (11:38 -0800)]
Merge tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Here are a bunch of USB patches for 3.3-rc1.
Nothing major, largest thing here is the removal of some drivers that
did not work at all. Other than that, the normal collection of bugfixes
and new device ids.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits)
uwb & wusb: fix kconfig error
USB: Realtek cr: fix autopm scheduling while atomic
USB: ftdi_sio: Add more identifiers
xHCI: Cleanup isoc transfer ring when TD length mismatch found
usb: musb: omap2430: minor cleanups.
qcaux: add more Pantech UML190 and UML290 ports
Revert "drivers: usb: Fix dependency for USB_HWA_HCD"
usb: mv-otg - Fix build if CONFIG_USB is not set
USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE
usb: add support for STA2X11 host driver
drivers: usb: Fix dependency for USB_HWA_HCD
kernel-doc: fix new warning in usb.h
USB: OHCI: fix new compiler warnings
usb: serial: kobil_sct: fix compile warning:
drivers/usb/host/ehci-fsl.c: add missing iounmap
USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core
USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
USB: cdc-wdm: use two mutexes to allow simultaneous read and write
USB: cdc-wdm: updating desc->length must be protected by spin_lock
USB: usbsevseg: fix max length
...
1) Setting link attributes can modify the size of the attributes that
would be reported on a subsequent getlink netlink operation,
therefore min_ifinfo_dump_size needs to be adjusted. From Stefan
Gula.
2) Resegmentation of TSO frames while trimming can violate invariants
expected by callers, namely that the number of segments can only stay
the same or decrease, never increase. If MSS changes, however, we
can trim data but then end up with more segments. Fix this by only
segmenting to the MSS already recorded in the SKB. That's the
simplest fix for now and if we want to get more fancy in the future
that's a more involved change.
This probably explains some retransmit counter inaccuracies.
From Neal Cardwell.
3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet.
4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and
Eric W. Biederman.
5) TCP port selection fixes from Flavio Leitner.
6) More socket memory cgroup build fixes in certain randonfig
situations. From Glauber Costa.
7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from
Glauber Costa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
af_unix: fix EPOLLET regression for stream sockets
tcp: fix tcp_trim_head() to adjust segment count with skb MSS
net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL
net caif: Register properly as a pernet subsystem.
netns: Fail conspicously if someone uses net_generic at an inappropriate time.
net: explicitly add jump_label.h header to sock.h
net: RTNETLINK adjusting values of min_ifinfo_dump_size
ipv6: Fix ip_gre lockless xmits.
xen-netfront: correct MAX_TX_TARGET calculation.
netns: fix net_alloc_generic()
tcp: bind() optimize port allocation
tcp: bind() fix autoselection to share ports
l2tp: l2tp_ip - fix possible oops on packet receive
iwlwifi: fix PCI-E transport "inta" race
mac80211: set bss_conf.idle when vif is connected
mac80211: update oper_channel on ibss join
Linus Torvalds [Mon, 30 Jan 2012 18:16:25 +0000 (10:16 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
This fixes an integration issue with the regulator device tree bindings
which shook out in -rc. The bindings were overly enthusiatic when
deciding to set a voltage on a regulator and would try to set zero volts
on an unconfigured regulator which isn't supported.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Set apply_uV only when min and max voltages are defined
Eric Dumazet [Sat, 28 Jan 2012 16:11:03 +0000 (16:11 +0000)]
af_unix: fix EPOLLET regression for stream sockets
Commit 0884d7aa24 (AF_UNIX: Fix poll blocking problem when reading from
a stream socket) added a regression for epoll() in Edge Triggered mode
(EPOLLET)
Appropriate fix is to use skb_peek()/skb_unlink() instead of
skb_dequeue(), and only call skb_unlink() when skb is fully consumed.
This remove the need to requeue a partial skb into sk_receive_queue head
and the extra sk->sk_data_ready() calls that added the regression.
This is safe because once skb is given to sk_receive_queue, it is not
modified by a writer, and readers are serialized by u->readlock mutex.
This also reduce number of spinlock acquisition for small reads or
MSG_PEEK users so should improve overall performance.
Reported-by: Nick Mathewson <nickm@freehaven.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Sat, 28 Jan 2012 17:29:46 +0000 (17:29 +0000)]
tcp: fix tcp_trim_head() to adjust segment count with skb MSS
This commit fixes tcp_trim_head() to recalculate the number of
segments in the skb with the skb's existing MSS, so trimming the head
causes the skb segment count to be monotonically non-increasing - it
should stay the same or go down, but not increase.
Previously tcp_trim_head() used the current MSS of the connection. But
if there was a decrease in MSS between original transmission and ACK
(e.g. due to PMTUD), this could cause tcp_trim_head() to
counter-intuitively increase the segment count when trimming bytes off
the head of an skb. This violated assumptions in tcp_tso_acked() that
tcp_trim_head() only decreases the packet count, so that packets_acked
in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to
pass u32 pkts_acked values as large as 0xffffffff to
ca_ops->pkts_acked().
As an aside, if tcp_trim_head() had really wanted the skb to reflect
the current MSS, it should have called tcp_set_skb_tso_segs()
unconditionally, since a decrease in MSS would mean that a
single-packet skb should now be sliced into multiple segments.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
That code, however, will never run when CONFIG_SYSCTL is
disabled, leading to bogus values on those fields - causing hung
TCP sockets.
This patch fixes it by keeping an initialization code in
tcp_init(). It will be overwritten by the first net namespace
init if CONFIG_SYSCTL is compiled in, and do the right thing if
it is compiled out.
It is also named properly as tcp_init_mem(), to properly signal
its non-sysctl side effect on TCP limits.
Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com
[ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 30 Jan 2012 17:02:10 +0000 (09:02 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
[S390] dasd: revalidate server for new pathgroup
[S390] dasd: revert LCU optimization
[S390] cleanup entry point definition
Linus Torvalds [Mon, 30 Jan 2012 16:56:41 +0000 (08:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
vmwgfx: Fix assignment in vmw_framebuffer_create_handle
drm/radeon/kms: Fix device tree linkage of i2c buses
drm: Pass the real error code back during GEM bo initialisation
Revert "drm/i810: cleanup reclaim_buffers"
Linus Torvalds [Mon, 30 Jan 2012 16:33:40 +0000 (08:33 -0800)]
Merge tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Power management fix for 3.3-rc2
Fix for a hibernate (s2disk) regression introduced during the 3.2
merge window that causes s2disk to trigger BUG_ON() in
freeze_workqueues_begin() if there is not enough swap space to save
the image.
* tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Hibernate: Fix s2disk regression related to freezing workqueues
This commit removes the reboot quirk originally added by commit e19e074 ("x86: Fix reboot problem on VersaLogic Menlow boards").
Testing with a VersaLogic Ocelot (VL-EPMs-21a rev 1.00 w/ BIOS
6.5.102) revealed the following regarding the reboot hang
problem:
- v2.6.37 reboot=bios was needed.
- v2.6.38-rc1: behavior changed, reboot=acpi is needed,
reboot=kbd and reboot=bios results in system hang.
- v2.6.38: VersaLogic patch (e19e074 "x86: Fix reboot problem on
VersaLogic Menlow boards") was applied prior to v2.6.38-rc7. This
patch sets a quirk for VersaLogic Menlow boards that forces the use
of reboot=bios, which doesn't work anymore.
- v3.2: It seems that commit 660e34c ("x86: Reorder reboot method
preferences") changed the default reboot method to acpi prior to
v3.0-rc1, which means the default behavior is appropriate for the
Ocelot. No VersaLogic quirk is required.
The Ocelot board used for testing can successfully reboot w/out
having to pass any reboot= arguments for all 3 current versions
of the BIOS.
Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Kushal Koolwal <kushalkoolwal@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87vcnub9hu.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
Skip DMI checks for vendor specific reboot quirks if the user
passed in a reboot= arg on the command line - we should never
override user choices.
Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87wr8ab9od.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ryan Mallon [Fri, 27 Jan 2012 21:51:40 +0000 (08:51 +1100)]
vmwgfx: Fix assignment in vmw_framebuffer_create_handle
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space.
Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Jean Delvare [Sat, 28 Jan 2012 10:10:38 +0000 (11:10 +0100)]
drm/radeon/kms: Fix device tree linkage of i2c buses
Properly set the parent device of i2c buses before registering them so
that they will show at the right place in the device tree (rather than
in /sys/devices directly.)
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Sun, 29 Jan 2012 16:45:32 +0000 (16:45 +0000)]
drm: Pass the real error code back during GEM bo initialisation
In particular, I found I was hitting the max-file limit in the VFS,
and the EFILE was being magically transformed into ENOMEM. Confusion
reigns.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
I've failed to take an odd interaction between my other cleanups and
this reclaim_buffers patch into account and also failed to properly
test it. Looks like there are more dragons and hidden trapdoors in the
drm release path than actual lines of code.
Until I get a clue, let's just revert this.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
PM / Hibernate: Freeze kernel threads after preallocating memory
introduced a mechanism by which kernel threads were frozen after
the preallocation of hibernate image memory to avoid problems with
frozen kernel threads not responding to memory freeing requests.
However, it overlooked the s2disk code path in which the
SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE,
which caused freeze_workqueues_begin() to BUG(), because it saw
that worqueues had been already frozen.
Although in principle this issue might be addressed by removing
the relevant BUG_ON() from freeze_workqueues_begin(), that would
reintroduce the very problem that commit 2aede851ddf08666f68ffc17be4
attempted to avoid into that particular code path. For this reason,
to fix the issue at hand, introduce thaw_kernel_threads() and make
the SNAPSHOT_FREE ioctl execute it.
Special thanks to Srivatsa S. Bhat for detailed analysis of the
problem.
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
Linus Torvalds [Sun, 29 Jan 2012 02:20:48 +0000 (18:20 -0800)]
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Here are some patches for the 3.3-rc1 tree.
It contains the removal of the sysdev code, now that all users of it are
gone, as well as some sysfs bugfixes that have been reported by users.
There are also some documentation updates here as well.
* tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Complain bitterly about attempts to remove files from nonexistent directories.
stable: update documentation to ask for kernel version
base/core.c:fix typo in comment in function device_add
Documentation: devres: add allocation functions to list of supported calls
Documentation update for the driver model core
kernel-doc: fix new warnings in driver-core
kernel-doc: fix new warnings in debugfs
kernel-doc: fix new warnings in device.h
driver core: remove drivers/base/sys.c and include/linux/sysdev.h
Linus Torvalds [Sun, 29 Jan 2012 02:16:09 +0000 (18:16 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux
* tag 'for-linus' of git://github.com/rustyrussell/linux:
lguest: remove reference from Documentation/virtual/00-INDEX
virtio: correct the memory barrier in virtqueue_kick_prepare()
virtio: fix typos of memory barriers
Linus Torvalds [Sun, 29 Jan 2012 02:15:33 +0000 (18:15 -0800)]
Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/granttable: Disable grant v2 for HVM domains.
x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
Linus Torvalds [Sun, 29 Jan 2012 01:00:19 +0000 (17:00 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix reservations in btrfs_page_mkwrite
Btrfs: advance window_start if we're using a bitmap
btrfs: mask out gfp flags in releasepage
Btrfs: fix enospc error caused by wrong checks of the chunk
Btrfs: do not defrag a file partially
Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
Btrfs: use cluster->window_start when allocating from a cluster bitmap
Btrfs: Check for NULL page in extent_range_uptodate
btrfs: Fix busyloops in transaction waiting code
Btrfs: make sure a bitmap has enough bytes
Btrfs: fix uninit warning in backref.c
Linus Torvalds [Sat, 28 Jan 2012 21:27:10 +0000 (13:27 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits)
ARM: 7304/1: ioremap: fix boundary check when reusing static mapping
ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts
ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2
ARM: 7298/1: realview: fix mapping of MPCore private memory region
PCMCIA: fix sa1111 oops on remove
ARM: 7288/1: mach-sa1100: add missing module_init() call
ARM: 7297/1: smp_twd: make sure timer is stopped before registering it
ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards
ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block
ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP
ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs
ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary
ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes
MFD: ucb1x00-ts: fix resume failure
MFD: ucb1x00-core: fix gpiolib direction_output handling
MFD: ucb1x00-core: fix missing restore of io output data on resume
MFD: mcp-core: fix mcp_priv() to be more type safe
MFD: mcp-core: fix complaints from the genirq layer
Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus."
Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources."
...
Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into
mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into
mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by
the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for
ARMv7 CPUs").
projects / mirror_ubuntu-disco-kernel.git / log