Michael Brunner [Mon, 24 Feb 2014 07:53:46 +0000 (08:53 +0100)]
mfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver
This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
the module description is also updated.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds support for Atom C2000 series (Avoton and Rangeley). And has
the following options:
- New addresses register.
- Caching output levels (see Intel external design spec, table 48-29)
- No hardware blink.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch allows GPIO driver to cache GPIO_LVL output registers. The aim is to
support chipsets on which GPIO_LVL value can't be read for output pins.
Caching output levels implies the first output values reading as 0. The driver
so can't be aware of set values GPIOs by bootloader or BIOS.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset to have
register addresses differing from ICH ones.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch allows gpio_ich driver to be aware of non blink capable chipsets.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: da9063: Add support for production silicon variant code
Add the correct silicon variant code ID (0x5) to the driver. This
new code is the 'production' variant code ID for DA9063.
This patch will remove the older variant code ID which matches the
pre-production silicon ID (0x3) for the DA9063 chip.
There is also some small amount of correction done in this patch:
it splits the revision code and correctly names it according to
the hardware specification and moves the dev_info() call before
the variant ID test.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Roger Tseng [Wed, 12 Feb 2014 10:00:36 +0000 (18:00 +0800)]
mfd: Add realtek USB card reader driver
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: 88pm800: Fix I2C device resource leak if probe fails
During probe the driver allocates two dummy I2C devices for subchips in
function pm800_pages_init(). Additionally this function allocates
regmaps for these subchips. If any of these steps fail then these dummy
I2C devices are not freed and resources leak.
On pm800_pages_init() fail the driver must call pm800_pages_exit() to
unregister dummy I2C devices.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Jingoo Han [Wed, 12 Feb 2014 05:31:49 +0000 (14:31 +0900)]
mfd: ti_am335x_tscadc: Use devm_ioremap_resource()
Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Three of the PMIC registers have some bits that are changed
autonomously by the PMIC itself (some time) after being set
by some component driver of the DA9052 PMIC and hence they
need to be marked as volatile so that the regmap API will
not cache their values.
Acked-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C devices for MUIC and haptic
with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by devm_regmap_init_i2c() and i2c_unregister_device().
If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe
for main MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: 88pm860x: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C device for companion chip
with i2c_new_dummy() but it does not check the return value of this call.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by regmap_init_i2c().
If i2c_new_dummy() fails for companion device, fail also the probe for
main MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
During probe the driver allocates dummy I2C device for companion chip
and then allocates a regmap for it. If regmap_init_i2c() fails then the
I2C driver (allocated with i2c_new_dummy()) is not freed and this
resource leaks.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C devices for RTC and ADC
with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe
for main MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC device, fail also the probe for
main MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C device for RTC with
i2c_new_dummy() but it does not check the return value of this call.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy error
During probe the driver allocates dummy I2C devices for RTC, haptic and
MUIC with i2c_new_dummy() but it does not check the return value of this
calls.
In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().
If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the
probe for main MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Paul Gortmaker [Tue, 21 Jan 2014 21:23:01 +0000 (16:23 -0500)]
mfd: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Thu, 23 Jan 2014 12:43:28 +0000 (13:43 +0100)]
mfd: tc3589x: Reform device tree probing
This changes the following mechanisms in the TC3589x device tree
probing path:
- Use the .of_match_table in struct device_driver to match the
device in the device tree.
- Add matches for the proper compatible strings "toshiba,..."
and all sub-variants, just as is done for the .id matches.
- Move over all the allocation of platform data etc to the
tc3589x_of_probe() function and follow the pattern of passing
a platform data pointer back, or an error pointer on error,
as found in the STMPE driver.
- Match the new (proper) compatible strings for the GPIO and
keypad MFD cells.
- Use of_device_is_compatible() rather than just !strcmp()
to discover which cells to instantiate.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: max14577: Add of_compatible to extcon mfd_cell
Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon
driver. If entry with such compatible is present in the DTS, the extcon
driver will have of_node set.
This may be useful for extcon consumers and it is documented in
bindings documentation.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Wed, 29 Jan 2014 10:09:53 +0000 (11:09 +0100)]
mfd: Include all drivers in subsystem menu
It is currently not possible to select the SA1100 or Vexpress
drivers in the MFD subsystem, because the menu for the entire
subsystem ends before these options are presented.
Move the main menu closing and the endif for HAS_IOMEM to the
end of the file so these are selectable again.
Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy error
During probe the sec-core driver allocates dummy I2C device for RTC with
i2c_new_dummy() but return value is not checked. In case of error
(i2c_new_device(): memory allocation failure or I2C address cannot be
used) this function returns NULL which is later used by
devm_regmap_init_i2c() or i2c_unregister_device().
If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.
Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexes
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding
interrupts are named similarly). Use consistent names for interrupts to
limit possible errors.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers
Simplify reading and writing of 16 bit TWL registers in the
driver by using twl_i2c_read_u16 and twl_i2c_write_u16.
Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add a simple twl_i2c_read/write_u16 wrapper over
the twl_i2c_read/write, which is similar to the
twl_i2c_read/write_u8 wrapper.
Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reported-by: Jonathan Cameron <jic23@kernel.org> Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: twl4030-madc: Add DT support and convert to IIO framework
This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.
Signed-off-by: Sebastian Reichel <sre@debian.org> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Update twl4030-madc driver to use managed resources.
Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Roger Quadros [Thu, 27 Feb 2014 14:18:23 +0000 (16:18 +0200)]
mfd: omap-usb-host: Get clocks based on hardware revision
Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.
This should avoid un-necessary clk_get failure messages that were
observed earlier.
Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.
Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Colin Ian King [Tue, 11 Feb 2014 09:38:53 +0000 (09:38 +0000)]
mfd: omap-usb-tll: Fix cppcheck sizeof warning
Static analysis from cppcheck issued the following warning:
[drivers/mfd/omap-usb-tll.c:255]: (warning) Found calculation
inside sizeof().
The current size calculation is not obvious and is easy to
miscomprehend, so re-work the size of the allocation based
on the size of the struct pointer and quantity to allocate.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Sun, 2 Mar 2014 23:15:07 +0000 (15:15 -0800)]
Merge tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 2 USB patches for 3.14-rc5, one a new device id, and the
other fixes a reported problem with threaded irqs and the USB EHCI
driver"
* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ehci: fix deadlock when threadirqs option is used
USB: ftdi_sio: add Cressi Leonardo PID
Linus Torvalds [Sun, 2 Mar 2014 23:12:54 +0000 (15:12 -0800)]
Merge tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final
merge to get the IIO fixes into this tree, they were incorrectly in
the char-misc tree for a few weeks, and I forgot to tell you to pull
them from there. This makes it a single pull request for you"
* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
iio:gyro: bug on L3GD20H gyroscope support
iio: cm32181: Change cm32181 ambient light sensor driver
iio: cm36651: Fix read/write integration time function.
Dave Airlie [Sun, 2 Mar 2014 23:04:41 +0000 (09:04 +1000)]
Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Dave Airlie [Sun, 2 Mar 2014 10:54:31 +0000 (20:54 +1000)]
Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/vmwgfx: avoid null pointer dereference at failure paths
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Fri, 28 Feb 2014 12:33:21 +0000 (13:33 +0100)]
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
Linus Torvalds [Sun, 2 Mar 2014 04:48:14 +0000 (22:48 -0600)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the series are bugfixes for qla2xxx target NPIV support
that went in for v3.14-rc1. Also included are a few DIF related
fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
protocol version related fix from Venkatesh.
Also just a heads up that a series to address a number of issues with
iser-target active I/O reset/shutdown is still being tested, and will
be included in a separate -rc6 PULL request"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
qla2xxx: Fix kernel panic on selective retransmission request
Target/sbc: Don't use sg as iterator in sbc_verify_read
target: Add DIF sense codes in transport_generic_request_failure
target/sbc: Fix sbc_dif_copy_prot addr offset bug
tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
qla2xxx: Fix qlt_lport_register base_vha callback race
Linus Torvalds [Sun, 2 Mar 2014 03:30:43 +0000 (21:30 -0600)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma fixes from Vinod Koul:
"This request brings you two small fixes. First one for fixing
dereference of freed descriptor and second for fixing sdma bindings
for it to work for imx25.
I was planning to send this about 10days ago but then I had to proceed
on my paternity leave and didnt get chance to send this. Now got a
bit of time from dady duties :)"
Linus Torvalds [Sun, 2 Mar 2014 03:28:38 +0000 (21:28 -0600)]
Merge tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These three commits fix a recent intel_pstate regression and two old
bugs that should be fixed in -stable too, one in the ACPI processor
driver and one in the firmare loader.
Specifics:
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu"
* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Rework processor throttling with work_on_cpu()
PM / hibernate: Fix restore hang in freeze_processes()
intel_pstate: Change busy calculation to use fixed point math.
Merge tag 'fixes-for-3.14d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
Linus Torvalds [Fri, 28 Feb 2014 19:53:33 +0000 (11:53 -0800)]
Merge tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"A few dm-cache fixes, an invalid ioctl handling fix for dm multipath,
a couple immutable biovec fixups for dm mirror, and a few dm-thin
fixes.
There will likely be additional dm-thin metadata and data resize fixes
to include in 3.14-rc6 next week.
Note to stable-minded folks: Immutable biovecs were introduced in
3.14, so the related fixups for dm mirror are not needed in stable@
kernels"
* tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix truncation bug when mapping I/O to >2TB fast device
dm thin: allow metadata space larger than supported to go unused
dm mpath: fix stalls when handling invalid ioctls
dm thin: fix the error path for the thin device constructor
dm raid1: fix immutable biovec related BUG when retrying read bio
dm io: fix I/O to multiple destinations
dm thin: avoid metadata commit if a pool's thin devices haven't changed
dm cache: do not add migration to completed list before unhooking bio
dm cache: move hook_info into common portion of per_bio_data structure
Linus Torvalds [Fri, 28 Feb 2014 19:50:32 +0000 (11:50 -0800)]
Merge tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's a bad habit to get a higher volume of fixes often lately, but
things happen again.
All commits found here are real bug fixes, and are mostly trivial.
Most of changes in ASoC are the fixes for enum items due to the wrong
API usages, in addition to a few DAPM mutex deadlock and other fixes.
In HD-audio, only fixups for HP laptops. Although diffstat shows
much, the changes are simple: there are just so many different device
entries there"
* tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sta32x: Fix wrong enum for limiter2 release rate
ASoC: da732x: Mark DC offset control registers volatile
ALSA: hda/realtek - Add more entry for enable HP mute led
ALSA: hda - Add a fixup for HP Folio 13 mute LED
ASoC: wm8958-dsp: Fix firmware block loading
ASoC: sta32x: Fix cache sync
ALSA: hda/realtek - Add more entry for enable HP mute led
ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
Input - arizona-haptics: Fix double lock of dapm_mutex
ASoC: wm8400: Fix the wrong number of enum items
ASoC: isabelle: Fix the wrong number of items in enum ctls
ASoC: ad1980: Fix wrong number of items for capture source
ASoC: wm8994: Fix the wrong number of enum items
ASoC: wm8900: Fix the wrong number of enum items
ASoC: wm8770: Fix wrong number of enum items
ASoC: sta32x: Fix array access overflow
ASoC: dapm: Correct regulator bypass error messages
Linus Torvalds [Fri, 28 Feb 2014 19:49:09 +0000 (11:49 -0800)]
Merge tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two fixes below for PCI devices disappearing when a reference count
underflow happens after a couple of insmod/rmmod cycles in succession"
* tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
i7300_edac: Fix device reference count
i7core_edac: Fix PCI device reference count
Linus Torvalds [Fri, 28 Feb 2014 19:45:03 +0000 (11:45 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three x86 fixes and one for ARM/ARM64.
In particular, nested virtualization on Intel is broken in 3.13 and
fixed by this pull request"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm, vmx: Really fix lazy FPU on nested guest
kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
KVM: MMU: drop read-only large sptes when creating lower level sptes
Catalin Marinas [Fri, 28 Feb 2014 16:12:25 +0000 (16:12 +0000)]
arm64: Fix !CONFIG_SMP kernel build
Commit fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Dave P Martin <Dave.Martin@arm.com>
Steve Capper [Tue, 25 Feb 2014 11:38:53 +0000 (11:38 +0000)]
arm64: mm: Add double logical invert to pte accessors
Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
dm cache: fix truncation bug when mapping I/O to >2TB fast device
When remapping a block to the cache's fast device that is larger than
2TB we must not truncate the destination sector to 32bits. The 32bit
temporary result of from_cblock() was being overflowed in
remap_to_cache() due to the logical left shift.
Use an intermediate 64bit type to store the 32bit from_cblock() result
to fix the overflow.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Jiri Olsa [Wed, 26 Feb 2014 17:14:26 +0000 (18:14 +0100)]
perf tools: Fix strict alias issue for find_first_bit
When compiling perf tool code with gcc 4.4.7 I'm getting
following error:
CC util/session.o
cc1: warnings being treated as errors
util/session.c: In function ‘perf_session_deliver_event’:
tools/perf/util/include/linux/bitops.h:109: error: dereferencing pointer ‘p’ does break strict-aliasing rules
tools/perf/util/include/linux/bitops.h:101: error: dereferencing pointer ‘p’ does break strict-aliasing rules
util/session.c:697: note: initialized from here
tools/perf/util/include/linux/bitops.h:101: note: initialized from here
make[1]: *** [util/session.o] Error 1
make: *** [util/session.o] Error 2
The aliased types here are u64 and unsigned long pointers, which is safe
for the find_first_bit processing.
This error shows up for me only for gcc 4.4 on 32bit x86, even for
-Wstrict-aliasing=3, while newer gcc are quiet and scream here for
-Wstrict-aliasing={2,1}. Looks like newer gcc changed the rules for
strict alias warnings.
The gcc documentation offers workaround for valid aliasing by using
__may_alias__ attribute:
The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13]
[ The current diag data is so big that it overflows the printk
buffer pretty quickly in cases when we get a handful of errors
at once which can happen. --BenH
]
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Tue, 25 Feb 2014 07:28:37 +0000 (15:28 +0800)]
powerpc/powernv: Dump PHB diag-data immediately
The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.
This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Paul Mackerras [Wed, 26 Feb 2014 06:07:38 +0000 (17:07 +1100)]
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes. This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.
To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.
Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.
In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.
This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone. It is not clear why this function would
ever be used on a 64-bit process, though.
Signed-off-by: Paul Mackerras <paulus@samba.org> CC: <stable@vger.kernel.org> [v3.13] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Laurent Dufour [Mon, 24 Feb 2014 16:30:55 +0000 (17:30 +0100)]
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.
This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.
This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.
Tony Breeds [Thu, 20 Feb 2014 10:13:52 +0000 (21:13 +1100)]
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token. We then pass that directly to rtas. This is
fine on big endian however on little endian the token is not what we
expect.
This will typically result in hitting:
panic("Alas, I survived.\n");
To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
projects / mirror_ubuntu-zesty-kernel.git / log