Alex Bennée [Wed, 12 May 2021 00:47:49 +0000 (19:47 -0500)]
tests/fp: Enable more tests
Fix the trivial typo in extF80_lt_quiet, and re-enable
all of the floatx80 tests that are now fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <87bl9iyahr.fsf@linaro.org>
[rth: Squash the fix for lt_quiet, and enable that too.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move floatN_log2 to softfloat-parts.c.inc
Rename to parts$N_log2. Though this is partly a ruse, since I do not
believe the code will succeed for float128 without work. Which is ok
for now, because we do not need this for more than float32 and float64.
Since berkeley-testfloat-3 doesn't support log2, compare float64_log2
vs the system log2. Fix the errors for inputs near 1.0:
tests/fp/fp-test: Reverse order of floatx80 precision tests
Many qemu softfloat will check floatx80_rounding_precision
even when berkeley testfloat will not. So begin with
floatx80_precision_x, so that's the one we use
when !FUNC_EFF_ROUNDINGPRECISION.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Adjust parts_uncanon_normal for floatx80
With floatx80_precision_x, the rounding happens across
the break between words. Notice this case with
frac_lsb = round_mask + 1 -> 0
and check the bits in frac_hi as needed.
In addition, since frac_shift == 0, we won't implicitly clear
round_mask via the right-shift, so explicitly clear those bits.
This fixes rounding for floatx80_precision_[sd].
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move sqrt_float to softfloat-parts.c.inc
Rename to parts$N_sqrt.
Reimplement float128_sqrt with FloatParts128.
Reimplement with the inverse sqrt newton-raphson algorithm from musl.
This is significantly faster than even the berkeley sqrt n-r algorithm,
because it does not use division instructions, only multiplication.
Ordinarily, changing algorithms at the same time as migrating code is
a bad idea, but this is the only way I found that didn't break one of
the routines at the same time.
Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move compare_floats to softfloat-parts.c.inc
Rename to parts$N_compare. Rename all of the intermediate
functions to ftype_do_compare. Rename the hard-float functions
to ftype_hs_compare. Convert float128 to FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move minmax_flags to softfloat-parts.c.inc
Rename to parts$N_minmax. Combine 3 bool arguments to a bitmask.
Introduce ftype_minmax functions as a common optimization point.
Fold bfloat16 expansions into the same macro as the other types.
Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move uint_to_float to softfloat-parts.c.inc
Rename to parts$N_uint_to_float.
Reimplement uint64_to_float128 with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
softfloat: Move int_to_float to softfloat-parts.c.inc
Rename to parts$N_sint_to_float.
Reimplement int{32,64}_to_float128 with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Thu, 3 Jun 2021 15:59:46 +0000 (16:59 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210603' into staging
target-arm queue:
* Some not-yet-enabled preliminaries for M-profile MVE support
* Consistently use "Cortex-Axx", not "Cortex Axx" in docs, comments
* docs: Fix installation of man pages with Sphinx 4.x
* Mark LDS{MIN,MAX} as signed operations
* Fix missing syndrome value for DAIF and PAC check exceptions
* Implement BFloat16 extensions
* Refactoring of hvf accelerator code in preparation for aarch64 support
* Fix some coverity nits in test code
* remotes/pmaydell/tags/pull-target-arm-20210603: (45 commits)
tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed
tests/qtest/tpm-tests: Remove unnecessary NULL checks
tests/qtest/pflash-cfi02-test: Avoid potential integer overflow
tests/qtest/hd-geo-test: Fix checks on mkstemp() return value
tests/qtest/e1000e-test: Check qemu_recv() succeeded
tests/qtest/bios-tables-test: Check for dup2() failure
hvf: Simplify post reset/init/loadvm hooks
hvf: Introduce hvf vcpu struct
hvf: Remove hvf-accel-ops.h
hvf: Make synchronize functions static
hvf: Use cpu_synchronize_state()
hvf: Split out common code on vcpu init and destroy
hvf: Remove use of hv_uvaddr_t and hv_gpaddr_t
hvf: Make hvf_set_phys_mem() static
hvf: Move hvf internal definitions into common header
hvf: Move cpu functions into common directory
hvf: Move vcpu thread functions into common directory
hvf: Move assert_hvf_ok() into common directory
target/arm: Enable BFloat16 extensions
linux-user/aarch64: Enable hwcap bits for bfloat16
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out that in tpm_test_swtpm_migration_test() we
assume that src_tpm_addr and dst_tpm_addr are non-NULL (we
pass them to tpm_util_migration_start_qemu() which will
unconditionally dereference them) but then later explicitly
check them for NULL. Remove the pointless checks.
Fixes: Coverity CID 1432367, 1432359 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-6-peter.maydell@linaro.org
Coverity points out that we calculate a 64-bit value using 32-bit
arithmetic; add the cast to force the multiply to be done as 64-bits.
(The overflow will never happen with the current test data.)
Fixes: Coverity CID 1432320 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-5-peter.maydell@linaro.org
Peter Maydell [Tue, 25 May 2021 13:44:55 +0000 (14:44 +0100)]
tests/qtest/hd-geo-test: Fix checks on mkstemp() return value
Coverity notices that the checks against mkstemp() failing in
create_qcow2_with_mbr() are wrong: mkstemp returns -1 on failure but
the check is just "g_assert(fd)". Fix to use "g_assert(fd >= 0)",
matching the correct check in create_test_img().
Fixes: Coverity CID 1432274 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-4-peter.maydell@linaro.org
The e1000e_send_verify() test calls qemu_recv() but doesn't
check that the call succeeded, which annoys Coverity. Add
an explicit test check for the length of the data.
(This is a test check, not a "we assume this syscall always
succeeds", so we use g_assert_cmpint() rather than g_assert().)
Fixes: Coverity CID 1432324 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-3-peter.maydell@linaro.org
Peter Maydell [Tue, 25 May 2021 13:44:53 +0000 (14:44 +0100)]
tests/qtest/bios-tables-test: Check for dup2() failure
Coverity notes that we don't check for dup2() failing. Add some
assertions so that if it does ever happen we get some indication.
(This is similar to how we handle other "don't expect this syscall to
fail" checks in this test code.)
Fixes: Coverity CID 1432346 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-2-peter.maydell@linaro.org
Alexander Graf [Thu, 3 Jun 2021 13:42:41 +0000 (14:42 +0100)]
hvf: Simplify post reset/init/loadvm hooks
The hooks we have that call us after reset, init and loadvm really all
just want to say "The reference of all register state is in the QEMU
vcpu struct, please push it".
We already have a working pushing mechanism though called cpu->vcpu_dirty,
so we can just reuse that for all of the above, syncing state properly the
next time we actually execute a vCPU.
This fixes PSCI resets on ARM, as they modify CPU state even after the
post init call has completed, but before we execute the vCPU again.
To also make the scheme work for x86, we have to make sure we don't
move stale eflags into our env when the vcpu state is dirty.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-13-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:34 +0000 (14:09 +0100)]
hvf: Introduce hvf vcpu struct
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:33 +0000 (14:09 +0100)]
hvf: Use cpu_synchronize_state()
There is no reason to call the hvf specific hvf_cpu_synchronize_state()
when we can just use the generic cpu_synchronize_state() instead. This
allows us to have less dependency on internal function definitions and
allows us to make hvf_cpu_synchronize_state() static.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-9-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:32 +0000 (14:09 +0100)]
hvf: Split out common code on vcpu init and destroy
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:31 +0000 (14:09 +0100)]
hvf: Move hvf internal definitions into common header
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves a few internal struct and constant defines over.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-5-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:31 +0000 (14:09 +0100)]
hvf: Move cpu functions into common directory
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves CPU and memory operations over. While at it, make sure
the code is consumable on non-i386 systems.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-4-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:31 +0000 (14:09 +0100)]
hvf: Move vcpu thread functions into common directory
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves the vCPU thread loop over.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-3-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexander Graf [Thu, 3 Jun 2021 13:09:30 +0000 (14:09 +0100)]
hvf: Move assert_hvf_ok() into common directory
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves assert_hvf_ok() and introduces generic build infrastructure.
Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-2-agraf@csgraf.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable BF16 again for !have_neon and !have_vfp during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/aarch64: Enable hwcap bits for bfloat16
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFMMLA for both AArch64 AdvSIMD and SVE,
and VMMLA.BF16 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For Arm BFDOT and BFMMLA, we need a version of round-to-odd
that overflows to infinity, instead of the max normal number.
Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement vector float32 to bfloat16 conversion
This is BFCVT{N,T} for both AArch64 AdvSIMD and SVE,
and VCVT.BF16.F32 for AArch32 NEON.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement scalar float32 to bfloat16 conversion
This is the 64-bit BFCVT and the 32-bit VCVT{B,T}.BF16.F32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Unify unallocated path in disas_fp_1src
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the SVE BFLOAT16 support does not require SVE2,
it is an independent extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jamie Iles [Wed, 26 May 2021 12:18:47 +0000 (13:18 +0100)]
target/arm: use raise_exception_ra for stack limit exception
The sequence cpu_restore_state() + raise_exception() is equivalent to
raise_exception_ra(), so use that instead. (In this case we never
cared about the syndrome value, because M-profile doesn't use the
syndrome; the old code was just written unnecessarily awkwardly.)
Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Retain edited version of comment; rewrite commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jamie Iles [Wed, 26 May 2021 12:18:46 +0000 (13:18 +0100)]
target/arm: use raise_exception_ra for MTE check failure
Now that raise_exception_ra restores the state before raising the
exception we can use restore_exception_ra to perform the state restore +
exception raising without clobbering the syndrome.
Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Keep the one line of the comment that is still relevant] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jamie Iles [Wed, 26 May 2021 12:18:45 +0000 (13:18 +0100)]
target/arm: fold do_raise_exception into raise_exception
Now that there are no other users of do_raise_exception, fold it into
raise_exception.
Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jamie Iles [Wed, 26 May 2021 12:18:44 +0000 (13:18 +0100)]
target/arm: fix missing exception class
The DAIF and PAC checks used raise_exception_ra to raise an exception
and unwind CPU state but raise_exception_ra is currently designed for
handling data aborts as the syndrome is partially precomputed and
encoded in the TB and then merged in merge_syn_data_abort when handling
the data abort. Using raise_exception_ra for DAIF and PAC checks
results in an empty syndrome being retrieved from data[2] in
restore_state_to_opc and setting ESR to 0. This manifested as:
target/arm: Mark LDS{MIN,MAX} as signed operations
The operands to tcg_gen_atomic_fetch_s{min,max}_i64 must
be signed, so that the inputs are properly extended.
Zero extend the result afterward, as needed.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/364 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210602020720.47679-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
docs: Fix installation of man pages with Sphinx 4.x
The 4.x branch of Sphinx introduces a breaking change, as generated man
pages are now written to subdirectories corresponding to the manual
section they belong to. This results in `make install` erroring out when
attempting to install the man pages, because they are not where it
expects to find them.
This patch restores the behavior of Sphinx 3.x regarding man pages.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/256 Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Message-id: 20210503161422.15028-1-dgouttegattat@incenp.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 27 May 2021 09:51:52 +0000 (10:51 +0100)]
arm: Consistently use "Cortex-Axx", not "Cortex Axx"
The official punctuation for Arm CPU names uses a hyphen, like
"Cortex-A9". We mostly follow this, but in a few places usage
without the hyphen has crept in. Fix those so we consistently
use the same way of writing the CPU name.
This commit was created with:
git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210527095152.10968-1-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:40 +0000 (16:28 +0100)]
target/arm: Allow board models to specify initial NS VTOR
Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU. Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:38 +0000 (16:28 +0100)]
target/arm: Make FPSCR.LTPSIZE writable for MVE
The M-profile FPSCR has an LTPSIZE field, but if MVE is not
implemented it is read-only and always reads as 4; this is how QEMU
currently handles it.
Make the field writable when MVE is implemented.
We can safely add the field to the MVE migration struct because
currently no CPUs enable MVE and so the migration struct is never
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-8-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:37 +0000 (16:28 +0100)]
target/arm: Implement M-profile VPR register
If MVE is implemented for an M-profile CPU then it has a VPR
register, which tracks predication information.
Implement the read and write handling of this register, and
the migration of its state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-7-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:36 +0000 (16:28 +0100)]
target/arm: Fix return values in fp_sysreg_checks()
The fp_sysreg_checks() function is supposed to be returning an
FPSysRegCheckResult, which is an enum with three possible values.
However, three places in the function "return false" (a hangover from
a previous iteration of the design where the function just returned a
bool). Make these return FPSysRegCheckFailed instead (for no
functional change, since both false and FPSysRegCheckFailed are
zero).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-6-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:35 +0000 (16:28 +0100)]
target/arm: Add MVE check to VMOV_reg_sp and VMOV_reg_dp
Split out the handling of VMOV_reg_sp and VMOV_reg_dp so that we can
permit the insns if either FP or MVE are present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-5-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:34 +0000 (16:28 +0100)]
target/arm: Move fpsp/fpdp isar check into callers of do_vfp_2op_sp/dp
The do_vfp_2op_sp() and do_vfp_2op_dp() functions currently check
whether floating point is supported via the aa32_fpdp_v2 and
aa32_fpsp_v2 isar checks. For v8.1M MVE support, the VMOV_reg trans
functions (but not any of the others) need to update this to also
allow the insn if MVE is implemented. Move the check out of the do_
function and into its callsites (which are all implemented via the
DO_VFP_2OP macro), so we have a place to change the check for the
VMOV insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-4-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:33 +0000 (16:28 +0100)]
target/arm: Update feature checks for insns which are "MVE or FP"
Some v8M instructions are present if either the floating point
extension or MVE is implemented. Update our implementation of them
to check for MVE as well as for FP.
This is all the insns which use CheckDecodeFaults(ExtType_MveOrFp) or
CheckDecodeFaults(ExtType_MveOrDpFp) in their pseudocode, which are
essentially the loads and stores, moves and sysreg accesses, except
for VMOV_reg_sp and VMOV_reg_dp, which we handle in subsequent
patches because they need a refactor to provide a place to put the
new MVE check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-3-peter.maydell@linaro.org
Peter Maydell [Thu, 20 May 2021 15:28:32 +0000 (16:28 +0100)]
target/arm: Add isar feature check functions for MVE
Add the isar feature check functions we will need for v8.1M MVE:
* a check for MVE present: this corresponds to the pseudocode's
CheckDecodeFaults(ExtType_Mve)
* a check for the optional floating-point part of MVE: this
corresponds to CheckDecodeFaults(ExtType_MveFp)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-2-peter.maydell@linaro.org
Peter Maydell [Thu, 3 Jun 2021 09:00:35 +0000 (10:00 +0100)]
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210603' into staging
ppc patch queue 2021-06-03
Next batch of ppc target patches. Highlights are:
* A fix for a regression with single-step mode
* Start of moving ppc to use decodetree
* Implementation of some POWER10 64-bit prefixed instructions
* Several cleanups to softmmu code
* Continued progress towards allowing --disable-tcg
* Fix for the POWER PEF implementation
* Fix for LPCR handling of hotplugged CPUs
* Assorted other bugfixes and cleanups
This patchset does contain a couple of changes to code outside my
normal scope of maintainership, related to the removal of cpu_dump and
cpu_statistics hooks. ppc was the last target arch implementing these
at all, and they didn't really do anything there either. The patches
should have relevant acks.
Luis Pires [Wed, 2 Jun 2021 12:51:03 +0000 (09:51 -0300)]
target/ppc: fix single-step exception regression
Commit 6086c75 (target/ppc: Replace POWERPC_EXCP_BRANCH with
DISAS_NORETURN) broke the generation of exceptions when
CPU_SINGLE_STEP or CPU_BRANCH_STEP were set, due to nip always being
reset to the address of the current instruction.
This fix leaves nip untouched when generating the exception.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br> Reported-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210602125103.332793-1-luis.pires@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Matheus Ferst [Tue, 1 Jun 2021 19:35:28 +0000 (16:35 -0300)]
target/ppc: Move cmp/cmpi/cmpl/cmpli to decodetree
Additionally, REQUIRE_64BIT when L=1 to match what is specified in The
Programming Environments Manual:
"For 32-bit implementations, the L field must be cleared, otherwise the
instruction form is invalid."
Some CPUs are known to deviate from this specification by ignoring the
L bit [1]. The stricter behavior, however, can help users that test
software with qemu, making it more likely to detect bugs that would
otherwise be silent.
If deemed necessary, a future patch can adapt this behavior based on
the specific CPU model.
[1] The 601 manual is the only one I've found that explicitly states
that the L bit is ignored, but we also observe this behavior in a 7447A
v1.2.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-15-matheus.ferst@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[dwg: Corrected whitespace error] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implements the following PowerISA v3.1 instructions:
setbc: Set Boolean Condition
setbcr: Set Boolean Condition Reverse
setnbc: Set Negative Boolean Condition
setnbcr: Set Negative Boolean Condition Reverse
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-11-matheus.ferst@eldorado.org.br> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fabiano Rosas [Tue, 1 Jun 2021 21:46:47 +0000 (18:46 -0300)]
target/ppc: powerpc_excp: Consolidade TLB miss code
The only difference in the code for Instruction fetch, Data load and
Data store TLB miss errors is that when called from an unsupported
processor (i.e. not one of 602, 603, 603e, G2, 7x5 or 74xx), they
abort with a message specific to the operation type (insn fetch, data
load/store).
If a processor does not support those interrupts we should not be
registering them in init_excp_<proc> to begin with, so that error
message would never be used.
I'm leaving the message in for completeness, but making it generic and
consolidating the three interrupts into the same case statement body.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210601214649.785647-4-farosas@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: overhauled and moved logic of storing fpscr
Followed the suggested overhaul to store_fpscr logic, and moved it to
cpu.c where it can be accessed in !TCG builds.
The overhaul was suggested because storing a value to fpscr should
never raise an exception, so we could remove all the mess that happened
with POWERPC_EXCP_FP.
We also moved fpscr_set_rounding_mode into cpu.c as it could now be moved
there, and it is needed when a value for the fpscr is being stored
directly.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210527163522.23019-1-bruno.larsen@eldorado.org.br> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This feature will no longer be useful as ppc moves to using decodetree
for TCG. And building with it enabled is no longer possible, due to
changes in opc_handler_t. Since the last commit that mentions it
happened in 2014, I think it is safe to remove it.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-5-bruno.larsen@eldorado.org.br> Reviewed-by: Luis Pires <luis.pires@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
since both, PPC_DO_STATISTICS and PPC_DUMP_CPU, are obsoleted as
target/ppc moves to decodetree, we can remove this ifdef based decision
tree, and only have what is now the standard option for the macro.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-4-bruno.larsen@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Documented the removal of the HMP command info cpustats
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-3-bruno.larsen@eldorado.org.br> Reviewed-by: Luis Pires <luis.pires@eldorado.org.br> Reviewed-by: Lucas Mateus <lucas.araujo@eldorado.org.br> Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Fix a Sphinx formatting error] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is happening because we're not setting the cgs->ready flag that is
asserted in qemu_machine_creation_done() during machine start.
cgs->ready is set in s390_pv_kvm_init() and sev_kvm_init(). Let's set it
in kvmppc_svm_init() as well.
Reported-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210528201619.52363-1-danielhb413@gmail.com> Acked-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luis Pires <luis.pires@eldorado.org.br> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
projects / mirror_qemu.git / log