Linus Torvalds [Tue, 9 Jun 2020 16:54:46 +0000 (09:54 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge even more updates from Andrew Morton:
- a kernel-wide sweep of show_stack()
- pagetable cleanups
- abstract out accesses to mmap_sem - prep for mmap_sem scalability work
- hch's user acess work
Subsystems affected by this patch series: debug, mm/pagemap, mm/maccess,
mm/documentation.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (93 commits)
include/linux/cache.h: expand documentation over __read_mostly
maccess: return -ERANGE when probe_kernel_read() fails
x86: use non-set_fs based maccess routines
maccess: allow architectures to provide kernel probing directly
maccess: move user access routines together
maccess: always use strict semantics for probe_kernel_read
maccess: remove strncpy_from_unsafe
tracing/kprobes: handle mixed kernel/userspace probes better
bpf: rework the compat kernel probe handling
bpf:bpf_seq_printf(): handle potentially unsafe format string better
bpf: handle the compat string in bpf_trace_copy_string better
bpf: factor out a bpf_trace_copy_string helper
maccess: unify the probe kernel arch hooks
maccess: remove probe_read_common and probe_write_common
maccess: rename strnlen_unsafe_user to strnlen_user_nofault
maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault
maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault
maccess: update the top of file comment
maccess: clarify kerneldoc comments
maccess: remove duplicate kerneldoc comments
...
Oleg Nesterov [Mon, 4 May 2020 16:47:25 +0000 (18:47 +0200)]
uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned
uprobe_write_opcode() must not cross page boundary; prepare_uprobe()
relies on arch_uprobe_analyze_insn() which should validate "vaddr" but
some architectures (csky, s390, and sparc) don't do this.
We can remove the BUG_ON() check in prepare_uprobe() and validate the
offset early in __uprobe_register(). The new IS_ALIGNED() check matches
the alignment check in arch_prepare_kprobe() on supported architectures,
so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.
Another problem is __update_ref_ctr() which was wrong from the very
beginning, it can read/write outside of kmap'ed page unless "vaddr" is
aligned to sizeof(short), __uprobe_register() should check this too.
include/linux/cache.h: expand documentation over __read_mostly
__read_mostly can easily be misused by folks, its not meant for just
read-only data. There are performance reasons for using it, but we also
don't provide any guidance about its use. Provide a bit more guidance
over its use.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200507161424.2584-1-mcgrof@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide arch_kernel_read and arch_kernel_write routines to implement the
maccess routines without messing with set_fs and without stac/clac that
opens up access to user space.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-20-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
maccess: allow architectures to provide kernel probing directly
Provide alternative versions of probe_kernel_read, probe_kernel_write
and strncpy_from_kernel_unsafe that don't need set_fs magic, but instead
use arch hooks that are modelled after unsafe_{get,put}_user to access
kernel memory in an exception safe way.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-19-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
maccess: always use strict semantics for probe_kernel_read
Except for historical confusion in the kprobes/uprobes and bpf tracers,
which has been fixed now, there is no good reason to ever allow user
memory accesses from probe_kernel_read. Switch probe_kernel_read to only
read from kernel memory.
[akpm@linux-foundation.org: update it for "mm, dump_page(): do not crash with invalid mapping pointer"]
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-17-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using the dangerous probe_kernel_read and strncpy_from_unsafe
helpers, rework probes to try a user probe based on the address if the
architecture has a common address space for kernel and userspace.
[svens@linux.ibm.com:use strncpy_from_kernel_nofault() in fetch_store_string()] Link: http://lkml.kernel.org/r/20200606181903.49384-1-svens@linux.ibm.com Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-15-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using the dangerous probe_kernel_read and strncpy_from_unsafe
helpers, rework the compat probes to check if an address is a kernel or
userspace one, and then use the low-level kernel or user probe helper
shared by the proper kernel and user probe helpers. This slightly
changes behavior as the compat probe on a user address doesn't check
the lockdown flags, just as the pure user probes do.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-14-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently architectures have to override every routine that probes
kernel memory, which includes a pure read and strcpy, both in strict
and not strict variants. Just provide a single arch hooks instead to
make sure all architectures cover all the cases.
Add proper kerneldoc comments for probe_kernel_read_strict and
probe_kernel_read strncpy_from_unsafe_strict and explain the different
versus the non-strict version.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-5-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many of the maccess routines have a copy of the kerneldoc comment
in the header. Remove it as it is not useful and will get out of
sync sooner or later.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-4-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
maccess tends to define lots of underscore prefixed symbols that then
have other weak aliases. But except for two cases they are never
actually used, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-3-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "clean up and streamline probe_kernel_* and friends", v4.
This series start cleaning up the safe kernel and user memory probing
helpers in mm/maccess.c, and then allows architectures to implement the
kernel probing without overriding the address space limit and temporarily
allowing access to user memory. It then switches x86 over to this new
mechanism by reusing the unsafe_* uaccess logic.
This version also switches to the saner copy_{from,to}_kernel_nofault
naming suggested by Linus.
I kept the x86 helpers as-is without calling unsage_{get,put}_user as that
avoids a number of hard to trace casts, and it will still work with the
asm-goto based version easily.
This patch (of 20):
probe_kernel_write() is not used by any modular code.
[sfr@canb.auug.org.au: turns out that probe_user_write is used in modular code] Link: http://lkml.kernel.org/r/20200602195741.4faaa348@canb.auug.org.au Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-1-hch@lst.de Link: http://lkml.kernel.org/r/20200521152301.2587579-2-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert comments that reference mmap_sem to reference mmap_lock instead.
[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename the mmap_sem field to mmap_lock. Any new uses of this lock should
now go through the new mmap locking api. The mmap_lock is still
implemented as a rwsem, though this could change in the future.
[akpm@linux-foundation.org: fix it for mm-gup-might_lock_readmmap_sem-in-get_user_pages_fast.patch]
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-11-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define a new initializer for the mmap locking api. Initially this just
evaluates to __RWSEM_INITIALIZER as the API is defined as wrappers around
rwsem.
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-9-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a couple APIs used by kernel/bpf/stackmap.c only:
- mmap_read_trylock_non_owner()
- mmap_read_unlock_non_owner() (may be called from a work queue).
It's still not ideal that bpf/stackmap subverts the lock ownership in this
way. Thanks to Peter Zijlstra for suggesting this API as the least-ugly
way of addressing this in the short term.
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-8-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap locking API: convert mmap_sem call sites missed by coccinelle
Convert the last few remaining mmap_sem rwsem calls to use the new mmap
locking API. These were missed by coccinelle for some reason (I think
coccinelle does not support some of the preprocessor constructs in these
files ?)
[akpm@linux-foundation.org: convert linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-6-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap locking API: initial implementation as rwsem wrappers
This patch series adds a new mmap locking API replacing the existing
mmap_sem lock and unlocks. Initially the API is just implemente in terms
of inlined rwsem calls, so it doesn't provide any new functionality.
There are two justifications for the new API:
- At first, it provides an easy hooking point to instrument mmap_sem
locking latencies independently of any other rwsems.
- In the future, it may be a starting point for replacing the rwsem
implementation with a different one, such as range locks. This is
something that is being explored, even though there is no wide concensus
about this possible direction yet. (see
https://patchwork.kernel.org/cover/11401483/)
This patch (of 12):
This change wraps the existing mmap_sem related rwsem calls into a new
mmap locking API. There are two justifications for the new API:
- At first, it provides an easy hooking point to instrument mmap_sem
locking latencies independently of any other rwsems.
- In the future, it may be a starting point for replacing the rwsem
implementation with a different one, such as range locks.
Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ying Han <yinghan@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-1-walken@google.com Link: http://lkml.kernel.org/r/20200520052908.204642-2-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Tue, 9 Jun 2020 04:33:10 +0000 (21:33 -0700)]
mm: consolidate pte_index() and pte_offset_*() definitions
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Tue, 9 Jun 2020 04:33:05 +0000 (21:33 -0700)]
mm: pgtable: add shortcuts for accessing kernel PMD and PTE
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
Mike Rapoport [Tue, 9 Jun 2020 04:33:01 +0000 (21:33 -0700)]
x86/mm: simplify init_trampoline() and surrounding logic
There are three cases for the trampoline initialization:
* 32-bit does nothing
* 64-bit with kaslr disabled simply copies a PGD entry from the direct map
to the trampoline PGD
* 64-bit with kaslr enabled maps the real mode trampoline at PUD level
These cases are currently differentiated by a bunch of ifdefs inside
asm/include/pgtable.h and the case of 64-bits with kaslr on uses
pgd_index() helper.
Replacing the ifdefs with a static function in arch/x86/mm/init.c gives
clearer code and allows moving pgd_index() to the generic implementation
in include/linux/pgtable.h
[rppt@linux.ibm.com: take CONFIG_RANDOMIZE_MEMORY into account in kaslr_enabled()] Link: http://lkml.kernel.org/r/20200525104045.GB13212@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-8-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Tue, 9 Jun 2020 04:32:56 +0000 (21:32 -0700)]
m68k/mm: move {cache,nocahe}_page() definitions close to their user
The cache_page() and nocache_page() functions are only used by the
motorola MMU variant for setting caching attributes for the page table
pages.
Move the definitions of these functions from
arch/m68k/include/asm/motorola_pgtable.h closer to their usage in
arch/m68k/mm/motorola.c and drop unused definition in
arch/m68k/include/asm/mcf_pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-7-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Tue, 9 Jun 2020 04:32:42 +0000 (21:32 -0700)]
mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Tue, 9 Jun 2020 04:32:33 +0000 (21:32 -0700)]
mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:32:19 +0000 (21:32 -0700)]
kdb: don't play with console_loglevel
Print the stack trace with KERN_EMERG - it should be always visible.
Playing with console_loglevel is a bad idea as there may be more messages
printed than wanted. Also the stack trace might be not printed at all if
printk() was deferred and console_loglevel was raised back before the
trace got flushed.
Unfortunately, after rebasing on commit 2277b492582d ("kdb: Fix stack
crawling on 'running' CPUs that aren't the master"), kdb_show_stack() uses
now kdb_dump_stack_on_cpu(), which for now won't be converted as it uses
dump_stack() instead of show_stack().
Convert for now the branch that uses show_stack() and remove
console_loglevel exercise from that case.
Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-48-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Safonov [Tue, 9 Jun 2020 04:32:13 +0000 (21:32 -0700)]
x86/amd_gart: print stacktrace for a leak with KERN_ERR
It's under CONFIG_IOMMU_LEAK option which is enabled by debug config.
Likely the backtrace is worth to be seen - so aligning with log level of
error message in iommu_full().
Dmitry Safonov [Tue, 9 Jun 2020 04:32:07 +0000 (21:32 -0700)]
xtensa: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:32:04 +0000 (21:32 -0700)]
xtensa: add loglvl to show_trace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to show_trace() as a preparation for introducing
show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:32:00 +0000 (21:32 -0700)]
x86: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:57 +0000 (21:31 -0700)]
x86: add missing const qualifiers for log_lvl
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Keep log_lvl const show_trace_log_lvl() and printk_stack_address() as the
new generic show_stack_loglvl() wants to have a proper const qualifier.
And gcc rightfully produces warnings in case it's not keept:
arch/x86/kernel/dumpstack.c: In function `show_stack':
arch/x86/kernel/dumpstack.c:294:37: warning: passing argument 4 of `show_trace_log_lv ' discards `const' qualifier from pointer target type [-Wdiscarded-qualifiers]
294 | show_trace_log_lvl(task, NULL, sp, loglvl);
| ^~~~~~
arch/x86/kernel/dumpstack.c:163:32: note: expected `char *' but argument is of type `const char *'
163 | unsigned long *stack, char *log_lvl)
| ~~~~~~^~~~~~~
Dmitry Safonov [Tue, 9 Jun 2020 04:31:54 +0000 (21:31 -0700)]
unicore32: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
As a nice side-effect - print backtrace in __die() with the same log level
as the rest of function.
Dmitry Safonov [Tue, 9 Jun 2020 04:31:51 +0000 (21:31 -0700)]
unicore32: add loglvl to c_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level parameter to c_backtrace() as a preparation for introducing
show_stack_loglvl()
Dmitry Safonov [Tue, 9 Jun 2020 04:31:45 +0000 (21:31 -0700)]
um: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:39 +0000 (21:31 -0700)]
sparc: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/20200418201944.482088-35-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Safonov [Tue, 9 Jun 2020 04:31:36 +0000 (21:31 -0700)]
sh: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:33 +0000 (21:31 -0700)]
sh: add loglvl to show_trace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level parameter to show_trace() as a preparation to introduce
show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:30 +0000 (21:31 -0700)]
sh: add loglvl to printk_address()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to printk_address() as a preparation to introduce
show_stack_loglvl().
As a good side-effect show_fault_oops() now prints the address with
KERN_EMREG as the rest of output, making sure there won't be situation
where "PC: " is printed without actual address.
Dmitry Safonov [Tue, 9 Jun 2020 04:31:24 +0000 (21:31 -0700)]
sh: add loglvl to dump_mem()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to dump_mem() as a preparation to introduce
show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:20 +0000 (21:31 -0700)]
s390: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:17 +0000 (21:31 -0700)]
riscv: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:14 +0000 (21:31 -0700)]
powerpc: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:11 +0000 (21:31 -0700)]
parisc: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:08 +0000 (21:31 -0700)]
openrisc: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:05 +0000 (21:31 -0700)]
nios2: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:31:02 +0000 (21:31 -0700)]
nds32: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:59 +0000 (21:30 -0700)]
mips: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:56 +0000 (21:30 -0700)]
microblaze: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:53 +0000 (21:30 -0700)]
microblaze: add loglvl to microblaze_unwind()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level parameter to microblaze_unwind() as a preparation to add
show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:50 +0000 (21:30 -0700)]
microblaze: add loglvl to microblaze_unwind_inner()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to microblaze_unwind_inner() as a preparation for
introducing show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:47 +0000 (21:30 -0700)]
m68k: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:44 +0000 (21:30 -0700)]
ia64: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:41 +0000 (21:30 -0700)]
ia64: pass log level as arg into ia64_do_show_stack()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to ia64_do_show_stack() as a preparation to
introduce show_stack_loglvl(). Also, make ia64_do_show_stack() static as
it's not used outside.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:38 +0000 (21:30 -0700)]
hexagon: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
As a good side-effect die() now prints the stacktrace with KERN_EMERG
aligned with other messages.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:35 +0000 (21:30 -0700)]
h8300: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:32 +0000 (21:30 -0700)]
csky: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:29 +0000 (21:30 -0700)]
c6x: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:26 +0000 (21:30 -0700)]
arm64: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:23 +0000 (21:30 -0700)]
arm64: add loglvl to dump_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to dump_backtrace() as a preparation for
introducing show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:19 +0000 (21:30 -0700)]
arm: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:16 +0000 (21:30 -0700)]
arm: wire up dump_backtrace_{entry,stm}
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Now that c_backtrace() always emits correct loglvl, use it for printing.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:13 +0000 (21:30 -0700)]
arm: add loglvl to dump_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to dump_backtrace() as a preparation for
introducing show_stack_loglvl().
As a good side-effect __die() now prints not only "Stack:" header with
KERN_EMERG, but the backtrace itself.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:10 +0000 (21:30 -0700)]
arm: add loglvl to unwind_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to unwind_backtrace() as a preparation for
introducing show_stack_loglvl().
As a good side-effect arm_syscall() is now printing errors with the same
log level as the backtrace.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:07 +0000 (21:30 -0700)]
arm/asm: add loglvl to c_backtrace()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to c_backtrace() as a preparation for introducing
show_stack_loglvl().
Dmitry Safonov [Tue, 9 Jun 2020 04:30:04 +0000 (21:30 -0700)]
arc: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
As a good side-effect header "Stack Trace:" is now printed with the same
log level as the rest of backtrace.
Dmitry Safonov [Tue, 9 Jun 2020 04:30:01 +0000 (21:30 -0700)]
alpha: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
Dmitry Safonov [Tue, 9 Jun 2020 04:29:56 +0000 (21:29 -0700)]
kallsyms/printk: add loglvl to print_ip_sym()
Patch series "Add log level to show_stack()", v3.
Add log level argument to show_stack().
Done in three stages:
1. Introducing show_stack_loglvl() for every architecture
2. Migrating old users with an explicit log level
3. Renaming show_stack_loglvl() into show_stack()
Justification:
- It's a design mistake to move a business-logic decision into platform
realization detail.
- I have currently two patches sets that would benefit from this work:
Removing console_loglevel jumps in sysrq driver [1] Hung task warning
before panic [2] - suggested by Tetsuo (but he probably didn't realise
what it would involve).
- While doing (1), (2) the backtraces were adjusted to headers and other
messages for each situation - so there won't be a situation when the
backtrace is printed, but the headers are missing because they have
lesser log level (or the reverse).
- As the result in (2) plays with console_loglevel for kdb are removed.
The least important for upstream, but maybe still worth to note that every
company I've worked in so far had an off-list patch to print backtrace
with the needed log level (but only for the architecture they cared
about). If you have other ideas how you will benefit from show_stack()
with a log level - please, reply to this cover letter.
See also discussion on v1:
https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/
This patch (of 50):
print_ip_sym() needs to have a log level parameter to comply with other
parts being printed. Otherwise, half of the expected backtrace would be
printed and other may be missing with some logging level.
The following callee(s) are using now the adjusted log level:
- microblaze/unwind: the same level as headers & userspace unwind.
Note that pr_debug()'s there are for debugging the unwinder itself.
- nds32/traps: symbol addresses are printed with the same log level
as backtrace headers.
- lockdep: ip for locking issues is printed with the same log level
as other part of the warning.
- sched: ip where preemption was disabled is printed as error like
the rest part of the message.
- ftrace: bug reports are now consistent in the log level being used.
Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 9 Jun 2020 16:30:21 +0000 (09:30 -0700)]
Merge branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 srbds fixes from Thomas Gleixner:
"The 9th episode of the dime novel "The performance killer" with the
subtitle "Slow Randomizing Boosts Denial of Service".
SRBDS is an MDS-like speculative side channel that can leak bits from
the random number generator (RNG) across cores and threads. New
microcode serializes the processor access during the execution of
RDRAND and RDSEED. This ensures that the shared buffer is overwritten
before it is released for reuse. This is equivalent to a full bus
lock, which means that many threads running the RNG instructions in
parallel have the same effect as the same amount of threads issuing a
locked instruction targeting an address which requires locking of two
cachelines at once.
The mitigation support comes with the usual pile of unpleasant
ingredients:
- command line options
- sysfs file
- microcode checks
- a list of vulnerable CPUs identified by model and stepping this
time which requires stepping match support for the cpu match logic.
- the inevitable slowdown of affected CPUs"
* branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add Ivy Bridge to affected list
x86/speculation: Add SRBDS vulnerability and mitigation documentation
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
x86/cpu: Add 'table' argument to cpu_matches()
Linus Torvalds [Mon, 8 Jun 2020 20:01:08 +0000 (13:01 -0700)]
Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
Linus Torvalds [Mon, 8 Jun 2020 19:58:12 +0000 (12:58 -0700)]
Merge tag 'rpmsg-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This replaces a zero-length array with flexible-array and fixes a typo
in a comment in the rpmsg core"
* tag 'rpmsg-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: Replace zero-length array with flexible-array
rpmsg: fix a comment typo for rpmsg_device_match()
Linus Torvalds [Mon, 8 Jun 2020 19:49:18 +0000 (12:49 -0700)]
Merge tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- OSD/MDS latency and caps cache metrics infrastructure for the
filesytem (Xiubo Li). Currently available through debugfs and will
be periodically sent to the MDS in the future.
- support for replica reads (balanced and localized reads) for rbd
and the filesystem (myself). The default remains to always read
from primary, users can opt-in with the new crush_location and
read_from_replica options. Note that reading from replica is safe
for general use only since Octopus.
- support for RADOS allocation hint flags (myself). Currently used by
rbd to propagate the compressible/incompressible hint given with
the new compression_hint map option and ready for passing on more
advanced hints, e.g. based on fadvise() from the filesystem.
- support for efficient cross-quota-realm renames (Luis Henriques)
- assorted cap handling improvements and cleanups, particularly
untangling some of the locking (Jeff Layton)"
* tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client: (29 commits)
rbd: compression_hint option
libceph: support for alloc hint flags
libceph: read_from_replica option
libceph: support for balanced and localized reads
libceph: crush_location infrastructure
libceph: decode CRUSH device/bucket types and names
libceph: add non-asserting rbtree insertion helper
ceph: skip checking caps when session reconnecting and releasing reqs
ceph: make sure mdsc->mutex is nested in s->s_mutex to fix dead lock
ceph: don't return -ESTALE if there's still an open file
libceph, rbd: replace zero-length array with flexible-array
ceph: allow rename operation under different quota realms
ceph: normalize 'delta' parameter usage in check_quota_exceeded
ceph: ceph_kick_flushing_caps needs the s_mutex
ceph: request expedited service on session's last cap flush
ceph: convert mdsc->cap_dirty to a per-session list
ceph: reset i_requested_max_size if file write is not wanted
ceph: throw a warning if we destroy session with mutex still locked
ceph: fix potential race in ceph_check_caps
ceph: document what protects i_dirty_item and i_flushing_item
...
Linus Torvalds [Mon, 8 Jun 2020 19:47:09 +0000 (12:47 -0700)]
Merge tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- An iopen glock locking scheme rework that speeds up deletes of inodes
accessed from multiple nodes
- Various bug fixes and debugging improvements
- Convert gfs2-glocks.txt to ReST
* tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix use-after-free on transaction ail lists
gfs2: new slab for transactions
gfs2: initialize transaction tr_ailX_lists earlier
gfs2: Smarter iopen glock waiting
gfs2: Wake up when setting GLF_DEMOTE
gfs2: Check inode generation number in delete_work_func
gfs2: Move inode generation number check into gfs2_inode_lookup
gfs2: Minor gfs2_lookup_by_inum cleanup
gfs2: Try harder to delete inodes locally
gfs2: Give up the iopen glock on contention
gfs2: Turn gl_delete into a delayed work
gfs2: Keep track of deleted inode generations in LVBs
gfs2: Allow ASPACE glocks to also have an lvb
gfs2: instrumentation wrt log_flush stuck
gfs2: introduce new gfs2_glock_assert_withdraw
gfs2: print mapping->nrpages in glock dump for address space glocks
gfs2: Only do glock put in gfs2_create_inode for free inodes
gfs2: Allow lock_nolock mount to specify jid=X
gfs2: Don't ignore inode write errors during inode_go_sync
docs: filesystems: convert gfs2-glocks.txt to ReST
projects / mirror_ubuntu-kernels.git / log