target/hppa: Add BTLB support to hppa TLB functions
Change the TLB code to store the Block-TLBs at the beginning
of the TLB table. New 4k TLB entries which are added later
shall not overwrite any of the BTLB entries.
Make sure that when the TLB is cleared by the OS via the ptlbe
instruction, the Block-TLBs will not be dropped.
Stefan Hajnoczi [Mon, 11 Sep 2023 13:13:08 +0000 (09:13 -0400)]
Merge tag 'pull-vfio-20230911' of https://github.com/legoater/qemu into staging
vfio queue:
* Small downtime optimisation for VFIO migration
* P2P support for VFIO migration
* Introduction of a save_prepare() handler to fail VFIO migration
* Fix on DMA logging ranges calculation for OVMF enabling dynamic window
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmT+uZQACgkQUaNDx8/7
# 7KGFSw//UIqSet6MUxZZh/t7yfNFUTnxx6iPdChC3BphBaDDh99FCQrw5mPZ8ImF
# 4rz0cIwSaHXraugEsC42TDaGjEmcAmYD0Crz+pSpLU21nKtYyWtZy6+9kyYslMNF
# bUq0UwD0RGTP+ZZi6GBy1hM30y/JbNAGeC6uX8kyJRuK5Korfzoa/X5h+B2XfouW
# 78G1mARHq5eOkGy91+rAJowdjqtkpKrzkfCJu83330Bb035qAT/PEzGs5LxdfTla
# ORNqWHy3W+d8ZBicBQ5vwrk6D5JIZWma7vdXJRhs1wGO615cuyt1L8nWLFr8klW5
# MJl+wM7DZ6UlSODq7r839GtSuWAnQc2j7JKc+iqZuBBk1v9fGXv2tZmtuTGkG2hN
# nYXSQfuq1igu1nGVdxJv6WorDxsK9wzLNO2ckrOcKTT28RFl8oCDNSPPTKpwmfb5
# i5RrGreeXXqRXIw0VHhq5EqpROLjAFwE9tkJndO8765Ag154plxssaKTUWo5wm7/
# kjQVuRuhs5nnMXfL9ixLZkwD1aFn5fWAIaR0psH5vGD0fnB1Pba+Ux9ZzHvxp5D8
# Kg3H6dKlht6VXdQ/qb0Up1LXCGEa70QM6Th2iO924ydZkkmqrSj+CFwGHvBsINa4
# 89fYd77nbRbdwWurj3JIznJYVipau2PmfbjZ/jTed4RxjBQ+fPA=
# =44e0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:54:12 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20230911' of https://github.com/legoater/qemu:
vfio/common: Separate vfio-pci ranges
vfio/migration: Block VFIO migration with background snapshot
vfio/migration: Block VFIO migration with postcopy migration
migration: Add .save_prepare() handler to struct SaveVMHandlers
migration: Move more initializations to migrate_init()
vfio/migration: Fail adding device with enable-migration=on and existing blocker
migration: Add migration prefix to functions in target.c
vfio/migration: Allow migration of multiple P2P supporting devices
vfio/migration: Add P2P support for VFIO migration
vfio/migration: Refactor PRE_COPY and RUNNING state checks
qdev: Add qdev_add_vm_change_state_handler_full()
sysemu: Add prepare callback to struct VMChangeStateEntry
vfio/migration: Move from STOP_COPY to STOP in vfio_save_cleanup()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 11 Sep 2023 13:12:12 +0000 (09:12 -0400)]
Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging
First RISC-V PR for 8.2
* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 11 Sep 2023 13:11:22 +0000 (09:11 -0400)]
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Optimise reqs_lock to make multiqueue actually scale
- virtio: Drop out of coroutine context in virtio_load()
- iotests: Fix reference output for some tests after recent changes
- vpc: Avoid dynamic stack allocation
- Code cleanup, improved documentation
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
virtio: Drop out of coroutine context in virtio_load()
vmstate: Mark VMStateInfo.get/put() coroutine_mixed_fn
block: Make more BlockDriver definitions static
block/meson.build: Restore alphabetical order of files
block: Remove unnecessary variable in bdrv_block_device_info
block: Remove bdrv_query_block_node_info
vmdk: Clean up bdrv_open_child() return value check
qemu-img: Update documentation for compressed images
block: Be more verbose in create fallback
block/iscsi: Document why we use raw malloc()
qemu-img: omit errno value in error message
block: change reqs_lock to QemuMutex
block: minimize bs->reqs_lock section in tracked_request_end()
iotests: adapt test output for new qemu_cleanup() behavior
block/vpc: Avoid dynamic stack allocation
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 11 Sep 2023 13:10:36 +0000 (09:10 -0400)]
Merge tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* New CPU type: cortex-a710
* Implement new architectural features:
- FEAT_PACQARMA3
- FEAT_EPAC
- FEAT_Pauth2
- FEAT_FPAC
- FEAT_FPACCOMBINE
- FEAT_TIDCP1
* Xilinx Versal: Model the CFU/CFI
* Implement RMR_ELx registers
* Implement handling of HCR_EL2.TIDCP trap bit
* arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
* hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte()
* target/arm: Do not use gen_mte_checkN in trans_STGP
* arm64: Restore trapless ptimer access
* tag 'pull-target-arm-20230908' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
target/arm: Enable SCTLR_EL1.TIDCP for user-only
target/arm: Implement FEAT_TIDCP1
target/arm: Implement HCR_EL2.TIDCP
target/arm: Implement cortex-a710
target/arm: Implement RMR_ELx
arm64: Restore trapless ptimer access
target/arm: Do not use gen_mte_checkN in trans_STGP
hw/arm/versal: Connect the CFRAME_REG and CFRAME_BCAST_REG
hw/arm/xlnx-versal: Connect the CFU_APB, CFU_FDRO and CFU_SFR
hw/misc: Introduce a model of Xilinx Versal's CFRAME_BCAST_REG
hw/misc: Introduce a model of Xilinx Versal's CFRAME_REG
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal's CFU_SFR
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal CFU_FDRO
hw/misc: Introduce a model of Xilinx Versal's CFU_APB
hw/misc: Introduce the Xilinx CFI interface
hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte()
target/arm: Implement FEAT_FPAC and FEAT_FPACCOMBINE
target/arm: Inform helpers whether a PAC instruction is 'combined'
target/arm: Implement FEAT_Pauth2
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU computes the DMA logging ranges for two predefined ranges: 32-bit
and 64-bit. In the OVMF case, when the dynamic MMIO window is enabled,
QEMU includes in the 64-bit range the RAM regions at the lower part
and vfio-pci device RAM regions which are at the top of the address
space. This range contains a large gap and the size can be bigger than
the dirty tracking HW limits of some devices (MLX5 has a 2^42 limit).
To avoid such large ranges, introduce a new PCI range covering the
vfio-pci device RAM regions, this only if the addresses are above 4GB
to avoid breaking potential SeaBIOS guests.
[ clg: - wrote commit log
- fixed overlapping 32-bit and PCI ranges when using SeaBIOS ]
vfio/migration: Block VFIO migration with background snapshot
Background snapshot allows creating a snapshot of the VM while it's
running and keeping it small by not including dirty RAM pages.
The way it works is by first stopping the VM, saving the non-iterable
devices' state and then starting the VM and saving the RAM while write
protecting it with UFFD. The resulting snapshot represents the VM state
at snapshot start.
VFIO migration is not compatible with background snapshot.
First of all, VFIO device state is not even saved in background snapshot
because only non-iterable device state is saved. But even if it was
saved, after starting the VM, a VFIO device could dirty pages without it
being detected by UFFD write protection. This would corrupt the
snapshot, as the RAM in it would not represent the RAM at snapshot
start.
To prevent this, block VFIO migration with background snapshot.
Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio/migration: Block VFIO migration with postcopy migration
VFIO migration is not compatible with postcopy migration. A VFIO device
in the destination can't handle page faults for pages that have not been
sent yet.
Doing such migration will cause the VM to crash in the destination:
migration: Add .save_prepare() handler to struct SaveVMHandlers
Add a new .save_prepare() handler to struct SaveVMHandlers. This handler
is called early, even before migration starts, and can be used by
devices to perform early checks.
Refactor migrate_init() to be able to return errors and call
.save_prepare() from there.
Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio/migration: Fail adding device with enable-migration=on and existing blocker
If a device with enable-migration=on is added and it causes a migration
blocker, adding the device should fail with a proper error.
This is not the case with multiple device migration blocker when the
blocker already exists. If the blocker already exists and a device with
enable-migration=on is added which causes a migration blocker, adding
the device will succeed.
Fix it by failing adding the device in such case.
Fixes: 8bbcb64a71d8 ("vfio/migration: Make VFIO migration non-experimental") Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
Avihai Horon [Wed, 2 Aug 2023 08:14:48 +0000 (11:14 +0300)]
vfio/migration: Add P2P support for VFIO migration
VFIO migration uAPI defines an optional intermediate P2P quiescent
state. While in the P2P quiescent state, P2P DMA transactions cannot be
initiated by the device, but the device can respond to incoming ones.
Additionally, all outstanding P2P transactions are guaranteed to have
been completed by the time the device enters this state.
The purpose of this state is to support migration of multiple devices
that might do P2P transactions between themselves.
Add support for P2P migration by transitioning all the devices to the
P2P quiescent state before stopping or starting the devices. Use the new
VMChangeStateHandler prepare_cb to achieve that behavior.
This will allow migration of multiple VFIO devices if all of them
support P2P migration.
Signed-off-by: Avihai Horon <avihaih@nvidia.com> Tested-by: YangHang Liu <yanghliu@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
Avihai Horon [Wed, 2 Aug 2023 08:14:45 +0000 (11:14 +0300)]
sysemu: Add prepare callback to struct VMChangeStateEntry
Add prepare callback to struct VMChangeStateEntry.
The prepare callback is optional and can be set by the new function
qemu_add_vm_change_state_handler_prio_full() that allows setting this
callback in addition to the main callback.
The prepare callbacks and main callbacks are called in two separate
phases: First all prepare callbacks are called and only then all main
callbacks are called.
The purpose of the new prepare callback is to allow all devices to run a
preliminary task before calling the devices' main callbacks.
This will facilitate adding P2P support for VFIO migration where all
VFIO devices need to be put in an intermediate P2P quiescent state
before being stopped or started by the main callback.
Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: YangHang Liu <yanghliu@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
Avihai Horon [Wed, 2 Aug 2023 08:14:44 +0000 (11:14 +0300)]
vfio/migration: Move from STOP_COPY to STOP in vfio_save_cleanup()
Changing the device state from STOP_COPY to STOP can take time as the
device may need to free resources and do other operations as part of the
transition. Currently, this is done in vfio_save_complete_precopy() and
therefore it is counted in the migration downtime.
To avoid this, change the device state from STOP_COPY to STOP in
vfio_save_cleanup(), which is called after migration has completed and
thus is not part of migration downtime.
Signed-off-by: Avihai Horon <avihaih@nvidia.com> Tested-by: YangHang Liu <yanghliu@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
Tommy Wu [Wed, 16 Aug 2023 06:16:43 +0000 (23:16 -0700)]
target/riscv: Align the AIA model to v1.0 ratified spec
According to the new spec, when vsiselect has a reserved value, attempts
from M-mode or HS-mode to access vsireg, or from VS-mode to access
sireg, should preferably raise an illegal instruction exception.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Leon Schuermann [Tue, 29 Aug 2023 21:50:46 +0000 (17:50 -0400)]
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
When the rule-lock bypass (RLB) bit is set in the mseccfg CSR, the PMP
configuration lock bits must not apply. While this behavior is
implemented for the pmpcfgX CSRs, this bit is not respected for
changes to the pmpaddrX CSRs. This patch ensures that pmpaddrX CSR
writes work even on locked regions when the global rule-lock bypass is
enabled.
Signed-off-by: Leon Schuermann <leons@opentitan.org> Reviewed-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230829215046.1430463-1-leon@is.currently.online> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Akihiko Odaki [Fri, 18 Aug 2023 03:40:58 +0000 (12:40 +0900)]
target/riscv: Allocate itrigger timers only once
riscv_trigger_init() had been called on reset events that can happen
several times for a CPU and it allocated timers for itrigger. If old
timers were present, they were simply overwritten by the new timers,
resulting in a memory leak.
Divide riscv_trigger_init() into two functions, namely
riscv_trigger_realize() and riscv_trigger_reset() and call them in
appropriate timing. The timer allocation will happen only once for a
CPU in riscv_trigger_realize().
Fixes: 5a4ae64cac ("target/riscv: Add itrigger support when icount is enabled") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230818034059.9146-1-akihiko.odaki@daynix.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Ard Biesheuvel [Thu, 31 Aug 2023 15:41:18 +0000 (17:41 +0200)]
target/riscv: Use accelerated helper for AES64KS1I
Use the accelerated SubBytes/ShiftRows/AddRoundKey AES helper to
implement the first half of the key schedule derivation. This does not
actually involve shifting rows, so clone the same value into all four
columns of the AES vector to counter that operation.
Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230831154118.138727-1-ardb@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 6df0b37e2ab breaks a --enable-debug build in a non-KVM
environment with the following error:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_intc_riscv_aplic.c.o: in function `riscv_kvm_aplic_request':
./qemu/build/../hw/intc/riscv_aplic.c:486: undefined reference to `kvm_set_irq'
collect2: error: ld returned 1 exit status
This happens because the debug build will poke into the
'if (is_kvm_aia(aplic->msimode))' block and fail to find a reference to
the KVM only function riscv_kvm_aplic_request().
There are multiple solutions to fix this. We'll go with the same
solution from the previous patch, i.e. add a kvm_enabled() conditional
to filter out the block. But there's a catch: riscv_kvm_aplic_request()
is a local function that would end up being used if the compiler crops
the block, and this won't work. Quoting Richard Henderson's explanation
in [1]:
"(...) the compiler won't eliminate entire unused functions with -O0"
We'll solve it by moving riscv_kvm_aplic_request() to kvm.c and add its
declaration in kvm_riscv.h, where all other KVM specific public
functions are already declared. Other archs handles KVM specific code in
this manner and we expect to do the same from now on.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A build with --enable-debug and without KVM will fail as follows:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_riscv_virt.c.o: in function `virt_machine_init':
./qemu/build/../hw/riscv/virt.c:1465: undefined reference to `kvm_riscv_aia_create'
This happens because the code block with "if virt_use_kvm_aia(s)" isn't
being ignored by the debug build, resulting in an undefined reference to
a KVM only function.
Add a 'kvm_enabled()' conditional together with virt_use_kvm_aia() will
make the compiler crop the kvm_riscv_aia_create() call entirely from a
non-KVM build. Note that adding the 'kvm_enabled()' conditional inside
virt_use_kvm_aia() won't fix the build because this function would need
to be inlined multiple times to make the compiler zero out the entire
block.
While we're at it, use kvm_enabled() in all instances where
virt_use_kvm_aia() is checked to allow the compiler to elide these other
kvm-only instances as well.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Fixes: dbdb99948e ("target/riscv: select KVM AIA in riscv virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vineet Gupta [Tue, 8 Aug 2023 18:17:14 +0000 (11:17 -0700)]
riscv: zicond: make non-experimental
zicond is now codegen supported in both llvm and gcc.
This change allows seamless enabling/testing of zicond in downstream
projects. e.g. currently riscv-gnu-toolchain parses elf attributes
to create a cmdline for qemu but fails short of enabling it because of
the "x-" prefix.
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Message-ID: <20230808181715.436395-1-vineetg@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
In the same emulated RISC-V host, the 'host' KVM CPU takes 4 times
longer to boot than the 'rv64' KVM CPU.
The reason is an unintended behavior of riscv_cpu_satp_mode_finalize()
when satp_mode.supported = 0, i.e. when cpu_init() does not set
satp_mode_max_supported(). satp_mode_max_from_map(map) does:
31 - __builtin_clz(map)
This means that, if satp_mode.supported = 0, satp_mode_supported_max
wil be '31 - 32'. But this is C, so satp_mode_supported_max will gladly
set it to UINT_MAX (4294967295). After that, if the user didn't set a
satp_mode, set_satp_mode_default_map(cpu) will make
cfg.satp_mode.map = cfg.satp_mode.supported
So satp_mode.map = 0. And then satp_mode_map_max will be set to
satp_mode_max_from_map(cpu->cfg.satp_mode.map), i.e. also UINT_MAX. The
guard "satp_mode_map_max > satp_mode_supported_max" doesn't protect us
here since both are UINT_MAX.
And finally we have 2 loops:
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
Which are, in fact, 2 loops from UINT_MAX -1 to -1. This is where the
extra delay when booting the 'host' CPU is coming from.
Commit 43d1de32f8 already set a precedence for satp_mode.supported = 0
in a different manner. We're doing the same here. If supported == 0,
interpret as 'the CPU wants the OS to handle satp mode alone' and skip
satp_mode_finalize().
We'll also put a guard in satp_mode_max_from_map() to assert out if map
is 0 since the function is not ready to deal with it.
Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Fixes: 6f23aaeb9b ("riscv: Allow user to set the satp mode") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230817152903.694926-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Weiwei Li [Wed, 16 Aug 2023 14:19:16 +0000 (22:19 +0800)]
target/riscv: Update CSR bits name for svadu extension
The Svadu specification updated the name of the *envcfg bit from
HADE to ADUE.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On a dtb dumped from the virt machine, dt-validate complains:
soc: pmu: {'riscv,event-to-mhpmcounters': [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280], [65563, 65563, 524280], [65569, 65569, 524280]], 'compatible': ['riscv,pmu']} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
That's pretty cryptic, but running the dtb back through dtc produces
something a lot more reasonable:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property
Moving the riscv,pmu node out of the soc bus solves the problem.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230727-groom-decline-2c57ce42841c@spud> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yong-Xuan Wang [Thu, 27 Jul 2023 10:24:37 +0000 (10:24 +0000)]
target/riscv: select KVM AIA in riscv virt machine
Select KVM AIA when the host kernel has in-kernel AIA chip support.
Since KVM AIA only has one APLIC instance, we map the QEMU APLIC
devices to KVM APLIC.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-6-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yong-Xuan Wang [Thu, 27 Jul 2023 10:24:36 +0000 (10:24 +0000)]
target/riscv: update APLIC and IMSIC to support KVM AIA
KVM AIA can't emulate APLIC only. When "aia=aplic" parameter is passed,
APLIC devices is emulated by QEMU. For "aia=aplic-imsic", remove the
mmio operations of APLIC when using KVM AIA and send wired interrupt
signal via KVM_IRQ_LINE API.
After KVM AIA enabled, MSI messages are delivered by KVM_SIGNAL_MSI API
when the IMSICs receive mmio write requests.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-5-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yong-Xuan Wang [Thu, 27 Jul 2023 10:24:35 +0000 (10:24 +0000)]
target/riscv: Create an KVM AIA irqchip
We create a vAIA chip by using the KVM_DEV_TYPE_RISCV_AIA and then set up
the chip with the KVM_DEV_RISCV_AIA_GRP_* APIs.
We also extend KVM accelerator to specify the KVM AIA mode. The "riscv-aia"
parameter is passed along with --accel in QEMU command-line.
1) "riscv-aia=emul": IMSIC is emulated by hypervisor
2) "riscv-aia=hwaccel": use hardware guest IMSIC
3) "riscv-aia=auto": use the hardware guest IMSICs whenever available
otherwise we fallback to software emulation.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-4-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yong-Xuan Wang [Thu, 27 Jul 2023 10:24:34 +0000 (10:24 +0000)]
target/riscv: check the in-kernel irqchip support
We check the in-kernel irqchip support when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yong-Xuan Wang [Thu, 27 Jul 2023 10:24:33 +0000 (10:24 +0000)]
target/riscv: support the AIA device emulation with KVM enabled
In this patch, we create the APLIC and IMSIC FDT helper functions and
remove M mode AIA devices when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-2-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Fri, 11 Aug 2023 05:54:38 +0000 (13:54 +0800)]
linux-user/riscv: Use abi type for target_ucontext
We should not use types dependend on host arch for target_ucontext.
This bug is found when run rv32 applications.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230811055438.1945-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jason Chien [Fri, 28 Jul 2023 08:24:39 +0000 (08:24 +0000)]
hw/intc: Make rtc variable names consistent
The variables whose values are given by cpu_riscv_read_rtc() should be named
"rtc". The variables whose value are given by cpu_riscv_read_rtc_raw()
should be named "rtc_r".
Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230728082502.26439-2-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jason Chien [Fri, 28 Jul 2023 08:24:38 +0000 (08:24 +0000)]
hw/intc: Fix upper/lower mtime write calculation
When writing the upper mtime, we should keep the original lower mtime
whose value is given by cpu_riscv_read_rtc() instead of
cpu_riscv_read_rtc_raw(). The same logic applies to writes to lower mtime.
Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230728082502.26439-1-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Fri, 28 Jul 2023 00:39:06 +0000 (08:39 +0800)]
target/riscv: Fix zfa fleq.d and fltq.d
Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension") Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jason Chien [Wed, 26 Jul 2023 07:40:46 +0000 (07:40 +0000)]
target/riscv: Add Zihintntl extension ISA string to DTS
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rob Bradford [Wed, 2 Aug 2023 12:49:06 +0000 (13:49 +0100)]
target/riscv: Implement WARL behaviour for mcountinhibit/mcounteren
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Max Chou [Tue, 11 Jul 2023 16:59:14 +0000 (00:59 +0800)]
target/riscv: Add Zvksed ISA extension support
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes] Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Max Chou [Tue, 11 Jul 2023 16:59:13 +0000 (00:59 +0800)]
crypto: Add SM4 constant parameter CK
Adds sm4_ck constant for use in sm4 cryptography across different targets.
Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-15-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Max Chou [Tue, 11 Jul 2023 16:59:12 +0000 (00:59 +0800)]
crypto: Create sm4_subword
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Nazar Kazakov [Tue, 11 Jul 2023 16:59:11 +0000 (00:59 +0800)]
target/riscv: Add Zvkg ISA extension support
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op] Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk> Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk> Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: Refactor some of the generic vector functionality
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: Refactor translation of vector-widening instruction
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Nazar Kazakov [Tue, 11 Jul 2023 16:59:04 +0000 (00:59 +0800)]
target/riscv: Move vector translation checks
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Lawrence Hunter [Tue, 11 Jul 2023 16:59:03 +0000 (00:59 +0800)]
target/riscv: Add Zvbc ISA extension support
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk> Co-authored-by: Max Chou <max.chou@sifive.com> Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk> Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk> Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: Refactor some of the generic vector functionality
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Max Chou <max.chou@sifive.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: Use existing lookup tables for MixColumns
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Zewen Ye <lustrew@foxmail.com> Cc: Weiwei Li <liweiwei@iscas.ac.cn> Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Sat, 29 Jul 2023 03:16:18 +0000 (11:16 +0800)]
target/riscv: Fix page_check_range use in fault-only-first
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e95.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e95 ("target/riscv: move zmmul out of the experimental properties") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Thomas Huth [Fri, 21 Jul 2023 09:47:20 +0000 (11:47 +0200)]
hw/char/riscv_htif: Fix the console syscall on big endian hosts
Values that have been read via cpu_physical_memory_read() from the
guest's memory have to be swapped in case the host endianess differs
from the guest.
Fixes: a6e13e31d5 ("riscv_htif: Support console output via proxy syscall") Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230721094720.902454-3-thuth@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Thomas Huth [Fri, 21 Jul 2023 09:47:19 +0000 (11:47 +0200)]
hw/char/riscv_htif: Fix printing of console characters on big endian hosts
The character that should be printed is stored in the 64 bit "payload"
variable. The code currently tries to print it by taking the address
of the variable and passing this pointer to qemu_chr_fe_write(). However,
this only works on little endian hosts where the least significant bits
are stored on the lowest address. To do this in a portable way, we have
to store the value in an uint8_t variable instead.
Fixes: 5033606780 ("RISC-V HTIF Console") Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721094720.902454-2-thuth@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv/cpu.c: do not run 'host' CPU with TCG
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
arm/kvm: Enable support for KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
The linux kernel detects and enables this bit. Once trapped,
EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so
no changes required within linux-user/aarch64/cpu_loop.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the check for EL2 enabled in the security space and the
TIDCP bit in an out-of-line helper.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cortex-a710 is a first generation ARMv9.0-A processor.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a stub implementation, as a write is a "request".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Colton Lewis [Thu, 31 Aug 2023 19:00:52 +0000 (19:00 +0000)]
arm64: Restore trapless ptimer access
Due to recent KVM changes, QEMU is setting a ptimer offset resulting
in unintended trap and emulate access and a consequent performance
hit. Filter out the PTIMER_CNT register to restore trapless ptimer
access.
Quoting Andrew Jones:
Simply reading the CNT register and writing back the same value is
enough to set an offset, since the timer will have certainly moved
past whatever value was read by the time it's written. QEMU
frequently saves and restores all registers in the get-reg-list array,
unless they've been explicitly filtered out (with Linux commit 680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to
restore trapless ptimer accesses, we need a QEMU patch to filter out
the register.
See
https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9
for additional context.
Cc: qemu-stable@nongnu.org Signed-off-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Colton Lewis <coltonlewis@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Colton Lewis <coltonlewis@google.com>
Message-id: 20230831190052.129045-1-coltonlewis@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Do not use gen_mte_checkN in trans_STGP
STGP writes to tag memory, it does not check it.
This happened to work because we wrote tag memory first
so that the check always succeeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230901203103.136408-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/versal: Connect the CFRAME_REG and CFRAME_BCAST_REG
Connect the Configuration Frame controller (CFRAME_REG) and the
Configuration Frame broadcast controller (CFRAME_BCAST_REG) to the
Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-9-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/xlnx-versal: Connect the CFU_APB, CFU_FDRO and CFU_SFR
Connect the Configuration Frame Unit (CFU_APB, CFU_FDRO and CFU_SFR) to
the Versal machine.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Acked-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-8-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc: Introduce a model of Xilinx Versal's CFRAME_BCAST_REG
Introduce a model of Xilinx Versal's Configuration Frame broadcast
controller (CFRAME_BCAST_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-7-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc: Introduce a model of Xilinx Versal's CFRAME_REG
Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal's CFU_SFR
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/xlnx-versal-cfu: Introduce a model of Xilinx Versal CFU_FDRO
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc: Introduce a model of Xilinx Versal's CFU_APB
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/intc/arm_gicv3_its: Avoid maybe-uninitialized error in get_vte()
Fix when using GCC v11.4 (Ubuntu 11.4.0-1ubuntu1~22.04) with CFLAGS=-Og:
[4/6] Compiling C object libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
FAILED: libcommon.fa.p/hw_intc_arm_gicv3_its.c.o
inlined from ‘lookup_vte’ at hw/intc/arm_gicv3_its.c:453:9,
inlined from ‘vmovp_callback’ at hw/intc/arm_gicv3_its.c:1039:14:
hw/intc/arm_gicv3_its.c:347:9: error: ‘vte.rdbase’ may be used uninitialized [-Werror=maybe-uninitialized]
347 | trace_gicv3_its_vte_read(vpeid, vte->valid, vte->vptsize,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
348 | vte->vptaddr, vte->rdbase);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/intc/arm_gicv3_its.c: In function ‘vmovp_callback’:
hw/intc/arm_gicv3_its.c:1036:13: note: ‘vte’ declared here
1036 | VTEntry vte;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230831131348.69032-1-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Tue, 5 Sep 2023 14:50:02 +0000 (16:50 +0200)]
virtio: Drop out of coroutine context in virtio_load()
virtio_load() as a whole should run in coroutine context because it
reads from the migration stream and we don't want this to block.
However, it calls virtio_set_features_nocheck() and devices don't
expect their .set_features callback to run in a coroutine and therefore
call functions that may not be called in coroutine context. To fix this,
drop out of coroutine context for calling virtio_set_features_nocheck().
Without this fix, the following crash was reported:
#0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
#1 0x00007efc738c05d3 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78
#2 0x00007efc73873d26 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
#3 0x00007efc738477f3 in __GI_abort () at abort.c:79
#4 0x00007efc7384771b in __assert_fail_base (fmt=0x7efc739dbcb8 "", assertion=assertion@entry=0x560aebfbf5cf "!qemu_in_coroutine()",
file=file@entry=0x560aebfcd2d4 "../block/graph-lock.c", line=line@entry=275, function=function@entry=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:92
#5 0x00007efc7386ccc6 in __assert_fail (assertion=0x560aebfbf5cf "!qemu_in_coroutine()", file=0x560aebfcd2d4 "../block/graph-lock.c", line=275,
function=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:101
#6 0x0000560aebcd8dd6 in bdrv_register_buf ()
#7 0x0000560aeb97ed97 in ram_block_added.llvm ()
#8 0x0000560aebb8303f in ram_block_add.llvm ()
#9 0x0000560aebb834fa in qemu_ram_alloc_internal.llvm ()
#10 0x0000560aebb2ac98 in vfio_region_mmap ()
#11 0x0000560aebb3ea0f in vfio_bars_register ()
#12 0x0000560aebb3c628 in vfio_realize ()
#13 0x0000560aeb90f0c2 in pci_qdev_realize ()
#14 0x0000560aebc40305 in device_set_realized ()
#15 0x0000560aebc48e07 in property_set_bool.llvm ()
#16 0x0000560aebc46582 in object_property_set ()
#17 0x0000560aebc4cd58 in object_property_set_qobject ()
#18 0x0000560aebc46ba7 in object_property_set_bool ()
#19 0x0000560aeb98b3ca in qdev_device_add_from_qdict ()
#20 0x0000560aebb1fbaf in virtio_net_set_features ()
#21 0x0000560aebb46b51 in virtio_set_features_nocheck ()
#22 0x0000560aebb47107 in virtio_load ()
#23 0x0000560aeb9ae7ce in vmstate_load_state ()
#24 0x0000560aeb9d2ee9 in qemu_loadvm_state_main ()
#25 0x0000560aeb9d45e1 in qemu_loadvm_state ()
#26 0x0000560aeb9bc32c in process_incoming_migration_co.llvm ()
#27 0x0000560aebeace56 in coroutine_trampoline.llvm ()
Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-832 Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905145002.46391-3-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 5 Sep 2023 14:50:01 +0000 (16:50 +0200)]
vmstate: Mark VMStateInfo.get/put() coroutine_mixed_fn
Migration code can run both in coroutine context (the usual case) and
non-coroutine context (at least savevm/loadvm for snapshots). This also
affects the VMState callbacks, and devices must consider this. Change
the callback definition in VMStateInfo to be explicit about it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905145002.46391-2-kwolf@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 5 Sep 2023 13:06:07 +0000 (15:06 +0200)]
block: Make more BlockDriver definitions static
Most block driver implementations don't have any reason for their
BlockDriver to be public. The only exceptions are bdrv_file, bdrv_raw
and bdrv_qcow2, which are actually used in other source files.
Make all other BlockDriver definitions static if they aren't yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905130607.35134-3-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 5 Sep 2023 13:06:06 +0000 (15:06 +0200)]
block/meson.build: Restore alphabetical order of files
When commit 5e5733e5999 created block/meson.build, the list of
unconditionally added files was in alphabetical order. Later commits
added new files in random places. Reorder the list to be alphabetical
again. (As for ordering foo.c against foo-*.c, there are both ways used
currently; standardise on having foo.c first, even though this is
different from the original commit 5e5733e5999.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230905130607.35134-2-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block: Remove unnecessary variable in bdrv_block_device_info
The commit 5d8813593f ("block/qapi: Let bdrv_query_image_info()
recurse") removed the loop where we set the 'bs0' variable, so now it
is just the same as 'bs'.
Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230901184605.32260-3-farosas@suse.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The last call site of this function has been removed by commit c04d0ab026 ("qemu-img: Let info print block graph").
Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20230901184605.32260-2-farosas@suse.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dmitry Frolov [Thu, 31 Aug 2023 12:59:27 +0000 (15:59 +0300)]
vmdk: Clean up bdrv_open_child() return value check
bdrv_open_child() may return NULL.
Usually return value is checked for this function.
Check for return value is more reliable.
Fixes: 24bc15d1f6 ("vmdk: Use BdrvChild instead of BDS for references to extents") Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-ID: <20230831125926.796205-1-frolov@swemel.ru> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 1 Sep 2023 10:24:30 +0000 (12:24 +0200)]
qemu-img: Update documentation for compressed images
Document the 'compression_type' option for qcow2, and mention that
streamOptimized vmdk supports compression, too.
Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230901102430.23856-1-kwolf@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Czenczek [Thu, 20 Jul 2023 14:00:24 +0000 (16:00 +0200)]
block: Be more verbose in create fallback
For image creation code, we have central fallback code for protocols
that do not support creating new images (like NBD or iscsi). So for
them, you can only specify existing paths/exports that are overwritten
to make clean new images. In such a case, if the given path cannot be
opened (assuming a pre-existing image there), we print an error message
that tries to describe what is going on: That with this protocol, you
cannot create new images, but only overwrite existing ones; and the
given path could not be opened as a pre-existing image.
However, the current message is confusing, because it does not say that
the protocol in question does not support creating new images, but
instead that "image creation" is unsupported. This can be interpreted
to mean that `qemu-img create` will not work in principle, which is not
true. Be more verbose for clarity.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2217204 Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20230720140024.46836-1-hreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Thu, 27 Jul 2023 15:07:05 +0000 (16:07 +0100)]
block/iscsi: Document why we use raw malloc()
In block/iscsi.c we use a raw malloc() call, which is unusual
given the project standard is to use the glib memory allocation
functions. Document why we do so, to avoid it being converted
to g_malloc() by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230727150705.2664464-1-peter.maydell@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Michael Tokarev [Fri, 11 Aug 2023 11:09:46 +0000 (14:09 +0300)]
qemu-img: omit errno value in error message
I'm getting io-qcow2-244 test failure on mips*
due to output mismatch:
Take an internal snapshot:
-qemu-img: Could not create snapshot 'test': -95 (Operation not supported)
+qemu-img: Could not create snapshot 'test': -122 (Operation not supported)
No errors were found on the image.
This is because errno values might be different across
different architectures.
This error message in qemu-img.c is the only one which
prints errno directly, all the rest print strerror(errno)
only. Fix this error message and the expected output
of the 3 test cases too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230811110946.2435067-1-mjt@tls.msk.ru> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 8 Aug 2023 15:58:52 +0000 (11:58 -0400)]
block: change reqs_lock to QemuMutex
CoMutex has poor performance when lock contention is high. The tracked
requests list is accessed frequently and performance suffers in QEMU
multi-queue block layer scenarios.
It is not necessary to use CoMutex for the requests lock. The lock is
always released across coroutine yield operations. It is held for
relatively short periods of time and it is not beneficial to yield when
the lock is held by another coroutine.
Change the lock type from CoMutex to QemuMutex to improve multi-queue
block layer performance. fio randread bs=4k iodepth=64 with 4 IOThreads
handling a virtio-blk device with 8 virtqueues improves from 254k to
517k IOPS (+203%). Full benchmark results and configuration details are
available here:
https://gitlab.com/stefanha/virt-playbooks/-/commit/980c40845d540e3669add1528739503c2e817b57
In the future we may wish to introduce thread-local tracked requests
lists to avoid lock contention completely. That would be much more
involved though.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230808155852.2745350-3-stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 8 Aug 2023 15:58:51 +0000 (11:58 -0400)]
block: minimize bs->reqs_lock section in tracked_request_end()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230808155852.2745350-2-stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fiona Ebner [Thu, 17 Aug 2023 11:25:38 +0000 (13:25 +0200)]
iotests: adapt test output for new qemu_cleanup() behavior
Since commit ca2a5e630d ("qemu_cleanup: begin drained section after
vm_shutdown()"), there will be an additional pause for jobs during
qemu_cleanup(). The reason is that the bdrv_drain_all() call in
do_vm_stop() is not inside the drained section used by qemu_cleanup()
anymore. I.e., there is a second drained section now that ends before
the final one in qemu_cleanup() starts. Thus, job_pause() is called
twice during cleanup (via child_job_drained_begin()).
Test 185 needs to be adapted directly too, because it waits for a
specific number of JOB_STATUS_CHANGE events before the
BLOCK_JOB_CANCELLED event.
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230817112538.255111-1-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use autofree heap allocation instead of variable-length array on the
stack. Here we don't expect the bitmap size to be enormous, and
since we're about to read/write it to disk the overhead of the
allocation should be fine.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMM: expanded commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230811175229.808139-1-peter.maydell@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (22 commits)
qxl: don't assert() if device isn't yet initialized
hw/net/vmxnet3: Fix guest-triggerable assert()
tests/qtest/usb-hcd: Remove the empty "init" tests
target/ppc: use g_free() in test_opcode_table()
hw/ppc: use g_free() in spapr_tce_table_post_load()
trivial: Simplify the spots that use TARGET_BIG_ENDIAN as a numeric value
accel/tcg: Fix typo in translator_io_start() description
tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test
docs tests: Fix use of migrate_set_parameter
qemu-options.hx: Rephrase the descriptions of the -hd* and -cdrom options
hw/display/xlnx_dp: update comments
block: spelling fixes
misc/other: spelling fixes
qga/: spelling fixes
tests/: spelling fixes
scripts/: spelling fixes
include/: spelling fixes
audio: spelling fixes
xen: spelling fix
riscv: spelling fixes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / mirror_qemu.git / log