]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
8 months agonet/mlx5e: Fix MACsec state loss upon state update in offload path
Emeel Hakim [Mon, 13 Mar 2023 15:03:03 +0000 (17:03 +0200)]
net/mlx5e: Fix MACsec state loss upon state update in offload path

The packet number attribute of the SA is incremented by the device rather
than the software stack when enabling hardware offload. Because the packet
number attribute is managed by the hardware, the software has no insight
into the value of the packet number attribute actually written by the
device.

Previously when MACsec offload was enabled, the hardware object for
handling the offload was destroyed when the SA was disabled. Re-enabling
the SA would lead to a new hardware object being instantiated. This new
hardware object would not have any recollection of the correct packet
number for the SA. Instead, destroy the flow steering rule when
deactivating the SA and recreate it upon reactivation, preserving the
original hardware object.

Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agonet/mlx5e: Change the warning when ignore_flow_level is not supported
Jianbo Liu [Mon, 25 Dec 2023 01:47:05 +0000 (01:47 +0000)]
net/mlx5e: Change the warning when ignore_flow_level is not supported

Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it
is just a statement of fact that firmware doesn't support ignore flow
level.

And change the wording to "firmware flow level support is missing", to
make it more accurate.

Fixes: ae2ee3be99a8 ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agonet/mlx5: Check capability for fw_reset
Moshe Shemesh [Sun, 28 Jan 2024 18:43:58 +0000 (20:43 +0200)]
net/mlx5: Check capability for fw_reset

Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.

Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.

In addition, return not supported on devlink reload action fw_activate
for these functions.

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agonet/mlx5: Fix fw reporter diagnose output
Aya Levin [Tue, 16 Jan 2024 18:13:34 +0000 (20:13 +0200)]
net/mlx5: Fix fw reporter diagnose output

Restore fw reporter diagnose to print the syndrome even if it is zero.
Following the cited commit, in this case (syndrome == 0) command returns no
output at all.

This fix restores command output in case syndrome is cleared:
$ devlink health diagnose pci/0000:82:00.0 reporter fw
    Syndrome: 0

Fixes: d17f98bf7cc9 ("net/mlx5: devlink health: use retained error fmsg API")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agonet/mlx5: E-switch, Change flow rule destination checking
Jianbo Liu [Thu, 11 Jan 2024 01:27:47 +0000 (01:27 +0000)]
net/mlx5: E-switch, Change flow rule destination checking

The checking in the cited commit is not accurate. In the common case,
VF destination is internal, and uplink destination is external.
However, uplink destination with packet reformat is considered as
internal because firmware uses LB+hairpin to support it. Update the
checking so header rewrite rules with both internal and external
destinations are not allowed.

Fixes: e0e22d59b47a ("net/mlx5: E-switch, Add checking for flow rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agoRevert "net/mlx5e: Check the number of elements before walk TC rhashtable"
Saeed Mahameed [Thu, 14 Dec 2023 01:07:08 +0000 (17:07 -0800)]
Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"

This reverts commit 4e25b661f484df54b6751b65f9ea2434a3b67539.

This Commit was mistakenly applied by pulling the wrong tag, remove it.

Fixes: 4e25b661f484 ("net/mlx5e: Check the number of elements before walk TC rhashtable")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agoRevert "net/mlx5: Block entering switchdev mode with ns inconsistency"
Gavin Li [Thu, 19 Oct 2023 01:49:54 +0000 (04:49 +0300)]
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"

This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b.
The revert is required due to the suspicion it is not good for anything
and cause crash.

Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
8 months agoMAINTAINERS: net: netsec: add myself as co-maintainer
Masahisa Kojima [Fri, 1 Mar 2024 06:32:14 +0000 (15:32 +0900)]
MAINTAINERS: net: netsec: add myself as co-maintainer

Add myself as co-maintainer for Socionext netsec driver.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agonet: bql: fix building with BQL disabled
Arnd Bergmann [Wed, 28 Feb 2024 16:06:56 +0000 (17:06 +0100)]
net: bql: fix building with BQL disabled

It is now possible to disable BQL, but that causes the cpsw driver to break:

drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
  297 |                    dql_avail(&netif_txq->dql),

There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.

Fixes: ea7f3cfaa588 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agonet: lan78xx: fix runtime PM count underflow on link stop
Oleksij Rempel [Wed, 28 Feb 2024 12:45:17 +0000 (13:45 +0100)]
net: lan78xx: fix runtime PM count underflow on link stop

Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".

Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agodt-bindings: net: renesas,ethertsn: Document default for delays
Niklas Söderlund [Fri, 23 Feb 2024 19:55:26 +0000 (20:55 +0100)]
dt-bindings: net: renesas,ethertsn: Document default for delays

The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agoMerge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 29 Feb 2024 20:40:20 +0000 (12:40 -0800)]
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...

8 months agoMerge tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic...
Linus Torvalds [Thu, 29 Feb 2024 20:29:23 +0000 (12:29 -0800)]
Merge tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull Landlock fix from Mickaël Salaün:
 "Fix a potential issue when handling inodes with inconsistent
  properties"

* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix asymmetric private inodes referring

8 months agodpll: fix build failure due to rcu_dereference_check() on unknown type
Eric Dumazet [Thu, 29 Feb 2024 19:05:15 +0000 (11:05 -0800)]
dpll: fix build failure due to rcu_dereference_check() on unknown type

Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():

include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’

Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.

Fixes: 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agokunit: Fix again checksum tests on big endian CPUs
Christophe Leroy [Fri, 23 Feb 2024 10:41:52 +0000 (11:41 +0100)]
kunit: Fix again checksum tests on big endian CPUs

Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoMerge tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluet...
Jakub Kicinski [Thu, 29 Feb 2024 17:10:24 +0000 (09:10 -0800)]
Merge tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - mgmt: Fix limited discoverable off timeout
 - hci_qca: Set BDA quirk bit if fwnode exists in DT
 - hci_bcm4377: do not mark valid bd_addr as invalid
 - hci_sync: Check the correct flag before starting a scan
 - Enforce validation on max value of connection interval
 - hci_sync: Fix accept_list when attempting to suspend
 - hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
 - Avoid potential use-after-free in hci_error_reset
 - rfcomm: Fix null-ptr-deref in rfcomm_check_security
 - hci_event: Fix wrongly recorded wakeup BD_ADDR
 - qca: Fix wrong event type for patch config command
 - qca: Fix triggering coredump implementation

* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
  Bluetooth: hci_sync: Fix accept_list when attempting to suspend
  Bluetooth: Avoid potential use-after-free in hci_error_reset
  Bluetooth: hci_sync: Check the correct flag before starting a scan
  Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================

Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoMerge branch 'tls-a-few-more-fixes-for-async-decrypt'
Jakub Kicinski [Thu, 29 Feb 2024 17:07:18 +0000 (09:07 -0800)]
Merge branch 'tls-a-few-more-fixes-for-async-decrypt'

Sabrina Dubroca says:

====================
tls: a few more fixes for async decrypt

The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).

[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=823784&state=*
[2] https://lore.kernel.org/all/9d664093b1bf7f47497b2c40b3a085b45f3274a2.1694021240.git.sd@queasysnail.net/
====================

Link: https://lore.kernel.org/r/cover.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agotls: fix use-after-free on failed backlog decryption
Sabrina Dubroca [Wed, 28 Feb 2024 22:44:00 +0000 (23:44 +0100)]
tls: fix use-after-free on failed backlog decryption

When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.

The only true async case is when crypto_aead_decrypt returns
 -EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.

Fixes: 859054147318 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agotls: separate no-async decryption request handling from async
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:59 +0000 (23:43 +0100)]
tls: separate no-async decryption request handling from async

If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.

We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.

This will make the next fix easier.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agotls: fix peeking with sync+async decryption
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:58 +0000 (23:43 +0100)]
tls: fix peeking with sync+async decryption

If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
  1. decrypt record 1 (sync)
  2. copy from record 1 to the userspace's msg
  3. queue the decrypted record to rx_list for future read(!PEEK)
  4. decrypt record 2 (async)
  5. queue record 2 to rx_list
  6. call process_rx_list to copy data from the 2nd record

We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.

Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs

Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agotls: decrement decrypt_pending if no async completion will be called
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:57 +0000 (23:43 +0100)]
tls: decrement decrypt_pending if no async completion will be called

With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.

For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).

Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agogtp: fix use-after-free and null-ptr-deref in gtp_newlink()
Alexander Ofitserov [Wed, 28 Feb 2024 11:47:03 +0000 (14:47 +0300)]
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()

The gtp_link_ops operations structure for the subsystem must be
registered after registering the gtp_net_ops pernet operations structure.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

[ 1010.702740] gtp: GTP module unloaded
[ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
[ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1
[ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
[ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00
[ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203
[ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000
[ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282
[ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000
[ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80
[ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400
[ 1010.715953] FS:  00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000
[ 1010.715958] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0
[ 1010.715968] PKRU: 55555554
[ 1010.715972] Call Trace:
[ 1010.715985]  ? __die_body.cold+0x1a/0x1f
[ 1010.715995]  ? die_addr+0x43/0x70
[ 1010.716002]  ? exc_general_protection+0x199/0x2f0
[ 1010.716016]  ? asm_exc_general_protection+0x1e/0x30
[ 1010.716026]  ? gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.716034]  ? gtp_net_exit+0x150/0x150 [gtp]
[ 1010.716042]  __rtnl_newlink+0x1063/0x1700
[ 1010.716051]  ? rtnl_setlink+0x3c0/0x3c0
[ 1010.716063]  ? is_bpf_text_address+0xc0/0x1f0
[ 1010.716070]  ? kernel_text_address.part.0+0xbb/0xd0
[ 1010.716076]  ? __kernel_text_address+0x56/0xa0
[ 1010.716084]  ? unwind_get_return_address+0x5a/0xa0
[ 1010.716091]  ? create_prof_cpu_mask+0x30/0x30
[ 1010.716098]  ? arch_stack_walk+0x9e/0xf0
[ 1010.716106]  ? stack_trace_save+0x91/0xd0
[ 1010.716113]  ? stack_trace_consume_entry+0x170/0x170
[ 1010.716121]  ? __lock_acquire+0x15c5/0x5380
[ 1010.716139]  ? mark_held_locks+0x9e/0xe0
[ 1010.716148]  ? kmem_cache_alloc_trace+0x35f/0x3c0
[ 1010.716155]  ? __rtnl_newlink+0x1700/0x1700
[ 1010.716160]  rtnl_newlink+0x69/0xa0
[ 1010.716166]  rtnetlink_rcv_msg+0x43b/0xc50
[ 1010.716172]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716179]  ? lock_acquire+0x1fe/0x560
[ 1010.716188]  ? netlink_deliver_tap+0x12f/0xd50
[ 1010.716196]  netlink_rcv_skb+0x14d/0x440
[ 1010.716202]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716208]  ? netlink_ack+0xab0/0xab0
[ 1010.716213]  ? netlink_deliver_tap+0x202/0xd50
[ 1010.716220]  ? netlink_deliver_tap+0x218/0xd50
[ 1010.716226]  ? __virt_addr_valid+0x30b/0x590
[ 1010.716233]  netlink_unicast+0x54b/0x800
[ 1010.716240]  ? netlink_attachskb+0x870/0x870
[ 1010.716248]  ? __check_object_size+0x2de/0x3b0
[ 1010.716254]  netlink_sendmsg+0x938/0xe40
[ 1010.716261]  ? netlink_unicast+0x800/0x800
[ 1010.716269]  ? __import_iovec+0x292/0x510
[ 1010.716276]  ? netlink_unicast+0x800/0x800
[ 1010.716284]  __sock_sendmsg+0x159/0x190
[ 1010.716290]  ____sys_sendmsg+0x712/0x880
[ 1010.716297]  ? sock_write_iter+0x3d0/0x3d0
[ 1010.716304]  ? __ia32_sys_recvmmsg+0x270/0x270
[ 1010.716309]  ? lock_acquire+0x1fe/0x560
[ 1010.716315]  ? drain_array_locked+0x90/0x90
[ 1010.716324]  ___sys_sendmsg+0xf8/0x170
[ 1010.716331]  ? sendmsg_copy_msghdr+0x170/0x170
[ 1010.716337]  ? lockdep_init_map_type+0x2c7/0x860
[ 1010.716343]  ? lockdep_hardirqs_on_prepare+0x430/0x430
[ 1010.716350]  ? debug_mutex_init+0x33/0x70
[ 1010.716360]  ? percpu_counter_add_batch+0x8b/0x140
[ 1010.716367]  ? lock_acquire+0x1fe/0x560
[ 1010.716373]  ? find_held_lock+0x2c/0x110
[ 1010.716384]  ? __fd_install+0x1b6/0x6f0
[ 1010.716389]  ? lock_downgrade+0x810/0x810
[ 1010.716396]  ? __fget_light+0x222/0x290
[ 1010.716403]  __sys_sendmsg+0xea/0x1b0
[ 1010.716409]  ? __sys_sendmsg_sock+0x40/0x40
[ 1010.716419]  ? lockdep_hardirqs_on_prepare+0x2b3/0x430
[ 1010.716425]  ? syscall_enter_from_user_mode+0x1d/0x60
[ 1010.716432]  do_syscall_64+0x30/0x40
[ 1010.716438]  entry_SYSCALL_64_after_hwframe+0x62/0xc7
[ 1010.716444] RIP: 0033:0x7fd1508cbd49
[ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48
[ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49
[ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006
[ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360
[ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0
[ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp
[ 1010.716674]  virtio_ring intel_gtt virtio [last unloaded: gtp]
[ 1010.716693] ---[ end trace 04990a4ce61e174b ]---

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Ofitserov <oficerovas@altlinux.org>
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoMerge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Paolo Abeni [Thu, 29 Feb 2024 11:16:07 +0000 (12:16 +0100)]
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.

Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.

There is a day 0 bug in br_netfilter when used with connection tracking.

Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.

For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.

This patch disables NAT and conntrack helpers for multicast packets.

Patch #3 adds a selftest to cover for the br_netfilter bug.

netfilter pull request 24-02-29

* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================

Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agonet: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
Lukasz Majewski [Wed, 28 Feb 2024 08:56:44 +0000 (09:56 +0100)]
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames

Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):

00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00

The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.

This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.

Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoigb: extend PTP timestamp adjustments to i211
Oleksij Rempel [Tue, 27 Feb 2024 18:49:41 +0000 (10:49 -0800)]
igb: extend PTP timestamp adjustments to i211

The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.

The adjustment result are tested and comparable for i210 and i211 based
systems.

Fixes: 3f544d2a4d5c ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agortnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
Lin Ma [Tue, 27 Feb 2024 12:11:28 +0000 (20:11 +0800)]
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.

if (have_flags)
    memcpy(nla_data(attr), &flags, sizeof(flags));
    // attr should point to IFLA_BRIDGE_FLAGS NLA !!!

Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.

This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.

Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agotools: ynl: fix handling of multiple mcast groups
Jakub Kicinski [Mon, 26 Feb 2024 21:40:18 +0000 (13:40 -0800)]
tools: ynl: fix handling of multiple mcast groups

We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.

As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:

  $ ./samples/netdev
  YNL: Multicast group 'mgmt' not found

Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.

Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoselftests: netfilter: add bridge conntrack + multicast test case
Florian Westphal [Mon, 26 Feb 2024 14:21:48 +0000 (15:21 +0100)]
selftests: netfilter: add bridge conntrack + multicast test case

Add test case for multicast packet confirm race.
Without preceding patch, this should result in:

 WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
 Workqueue: events_unbound macvlan_process_broadcast
 RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
  ? __nf_conntrack_confirm+0x3ed/0x5f0
  nf_confirm+0x2ad/0x2d0
  nf_hook_slow+0x36/0xd0
  ip_local_deliver+0xce/0x110
  __netif_receive_skb_one_core+0x4f/0x70
  process_backlog+0x8c/0x130
  [..]

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 months agonetfilter: bridge: confirm multicast packets before passing them up the stack
Florian Westphal [Tue, 27 Feb 2024 15:17:51 +0000 (16:17 +0100)]
netfilter: bridge: confirm multicast packets before passing them up the stack

conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.

 Example:
    macvlan0
       |
      br0
     /  \
  ethX    ethY

 ethX (or Y) receives a L2 multicast or broadcast packet containing
 an IP packet, flow is not yet in conntrack table.

 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
    -> skb->_nfct now references a unconfirmed entry
 2. skb is broad/mcast packet. bridge now passes clones out on each bridge
    interface.
 3. skb gets passed up the stack.
 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
    and schedules a work queue to send them out on the lower devices.

    The clone skb->_nfct is not a copy, it is the same entry as the
    original skb.  The macvlan rx handler then returns RX_HANDLER_PASS.
 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.

The Macvlan broadcast worker and normal confirm path will race.

This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table).  This works fine.

But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.

Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.

This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.

Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.

The downside is that this disables NAT and conntrack helpers.

Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:

-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5

For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.

Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.

Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 months agonetfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Ignat Korchagin [Thu, 22 Feb 2024 10:33:08 +0000 (10:33 +0000)]
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()

Commit d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.

While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.

As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):

table inet testfw {
  chain input {
    type filter hook prerouting priority filter; policy accept;
    bytecode counter packets 0 bytes 0 accept
  }
}

After d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.

Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.

Changes in v3:
  * clarify that upstream nft will not display such configuration properly and
    that the output was generated with a patched nft tool
  * remove example program from commit description and link to it instead
  * no code changes otherwise

Changes in v2:
  * restrict nft_(match/target)_validate() to classic iptables hooks
  * rewrite example program to use unmodified libnftnl

Fixes: d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 months agoMerge tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Wed, 28 Feb 2024 20:20:00 +0000 (12:20 -0800)]
Merge tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent EC driver change that introduced an unexpected and
  undesirable user-visible difference in behavior (Rafael Wysocki)"

* tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: EC: Use a spin lock without disabing interrupts"

8 months agoMerge tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Wed, 28 Feb 2024 20:18:31 +0000 (12:18 -0800)]
Merge tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "Fix a latent bug in the intel-pstate cpufreq driver that has been
  exposed by the recent schedutil governor changes (Doug Smythies)"

* tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: fix pstate limits enforcement for adjust_perf call back

8 months agoMerge tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Linus Torvalds [Wed, 28 Feb 2024 19:16:19 +0000 (11:16 -0800)]
Merge tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "There's two things here - the big one is a batch of fixes for the
  power management in the Cadence QuadSPI driver which had some serious
  issues with runtime PM and there's also a revert of one of the last
  batch of fixes for ppc4xx which has a dependency on -next but was in
  between two mainline fixes so the -next dependency got missed.

  The ppc4xx driver is not currently included in any defconfig and has
  dependencies that exclude it from allmodconfigs so none of the CI
  systems catch issues with it, hence the need for the earlier fixes
  series. There's some updates to the PowerPC configs to address this"

* tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Drop mismerged fix
  spi: cadence-qspi: add system-wide suspend and resume callbacks
  spi: cadence-qspi: put runtime in runtime PM hooks names
  spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
  spi: cadence-qspi: fix pointer reference in runtime PM hooks

8 months agoMerge tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 28 Feb 2024 19:10:27 +0000 (11:10 -0800)]
Merge tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small fixes, one small update for the max5970 driver bringing the
  driver and DT binding documentation into sync plus a missed update to
  the patterns in MAINTAINERS after a DT binding YAML conversion"

* tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max5970: Fix regulator child node name
  MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER

8 months agoMerge tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Wed, 28 Feb 2024 17:30:26 +0000 (09:30 -0800)]
Merge tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in lskcipher and an out-of-bound access
  in arm64/neonbs"

* tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/neonbs - fix out-of-bounds access on short input
  crypto: lskcipher - Copy IV in lskcipher glue code always

8 months agoBluetooth: qca: Fix triggering coredump implementation
Zijun Hu [Fri, 26 Jan 2024 09:00:24 +0000 (17:00 +0800)]
Bluetooth: qca: Fix triggering coredump implementation

hci_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command
to trigger firmware coredump, but the command does not have any event as
its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by
using __hci_cmd_send().

Fixes: 06d3fdfcdf5c ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Janaki Ramaiah Thota [Wed, 24 Jan 2024 14:30:42 +0000 (20:00 +0530)]
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT

BT adapter going into UNCONFIGURED state during BT turn ON when
devicetree has no local-bd-address node.

Bluetooth will not work out of the box on such devices, to avoid this
problem, added check to set HCI_QUIRK_USE_BDADDR_PROPERTY based on
local-bd-address node entry.

When this quirk is not set, the public Bluetooth address read by host
from controller though HCI Read BD Address command is
considered as valid.

Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: qca: Fix wrong event type for patch config command
Zijun Hu [Fri, 19 Jan 2024 09:45:30 +0000 (17:45 +0800)]
Bluetooth: qca: Fix wrong event type for patch config command

Vendor-specific command patch config has HCI_Command_Complete event as
response, but qca_send_patch_config_cmd() wrongly expects vendor-specific
event for the command, fixed by using right event type.

Btmon log for the vendor-specific command are shown below:
< HCI Command: Vendor (0x3f|0x0000) plen 5
        28 01 00 00 00
> HCI Event: Command Complete (0x0e) plen 5
      Vendor (0x3f|0x0000) ncmd 1
        Status: Success (0x00)
        28

Fixes: 4fac8a7ac80b ("Bluetooth: btqca: sequential validation")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: Enforce validation on max value of connection interval
Kai-Heng Feng [Thu, 25 Jan 2024 06:50:28 +0000 (14:50 +0800)]
Bluetooth: Enforce validation on max value of connection interval

Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]

That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.

So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.

[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869

Fixes: 68d19d7d9957 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Luiz Augusto von Dentz [Mon, 22 Jan 2024 14:02:47 +0000 (09:02 -0500)]
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST

If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+9UdG1cMZVmdtN3U2aS16AKMCyTARZZyFX7xTEDWcMOw@mail.gmail.com/T/#t
Fixes: c7f59461f5a7 ("Bluetooth: Fix a refcnt underflow problem for hci_conn")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: mgmt: Fix limited discoverable off timeout
Frédéric Danis [Mon, 22 Jan 2024 16:59:55 +0000 (17:59 +0100)]
Bluetooth: mgmt: Fix limited discoverable off timeout

LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C

Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
Zijun Hu [Tue, 9 Jan 2024 11:03:23 +0000 (19:03 +0800)]
Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR

hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.

Fixes: 2f20216c1d6f ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Yuxuan Hu [Wed, 3 Jan 2024 09:10:43 +0000 (17:10 +0800)]
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_sync: Fix accept_list when attempting to suspend
Luiz Augusto von Dentz [Fri, 5 Jan 2024 15:43:26 +0000 (10:43 -0500)]
Bluetooth: hci_sync: Fix accept_list when attempting to suspend

During suspend, only wakeable devices can be in acceptlist, so if the
device was previously added it needs to be removed otherwise the device
can end up waking up the system prematurely.

Fixes: 3b42055388c3 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan")
Signed-off-by: Clancy Shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
8 months agoBluetooth: Avoid potential use-after-free in hci_error_reset
Ying Hsu [Thu, 4 Jan 2024 11:56:32 +0000 (11:56 +0000)]
Bluetooth: Avoid potential use-after-free in hci_error_reset

While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.

Here's the call trace observed on a ChromeOS device with Intel AX201:
   queue_work_on+0x3e/0x6c
   __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
   ? init_wait_entry+0x31/0x31
   __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
   hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
   process_one_work+0x1d8/0x33f
   worker_thread+0x21b/0x373
   kthread+0x13a/0x152
   ? pr_cont_work+0x54/0x54
   ? kthread_blkcg+0x31/0x31
    ret_from_fork+0x1f/0x30

This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.

Fixes: c7741d16a57c ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_sync: Check the correct flag before starting a scan
Jonas Dreßler [Tue, 2 Jan 2024 18:08:08 +0000 (19:08 +0100)]
Bluetooth: hci_sync: Check the correct flag before starting a scan

There's a very confusing mistake in the code starting a HCI inquiry: We're
calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag()
checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's
set on hdev->flags, not on hdev->dev_flags though.

HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means
HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here.

The mistake is only present in the synchronous code for starting an inquiry,
not in the async one. Also devices are typically bondable while doing an
inquiry, so that might be the reason why nobody noticed it so far.

Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoBluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
Johan Hovold [Wed, 27 Dec 2023 10:10:03 +0000 (11:10 +0100)]
Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom BCM4377 driver has so far been
setting this flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced
with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address
is invalid but can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org # 6.5
Reported-by: Felix Zhang <mrman@mrman314.tech>
Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Felix Zhang <mrman@mrman314.tech>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
8 months agoDocumentations: correct net_cachelines title for struct inet_sock
Haiyue Wang [Mon, 26 Feb 2024 17:09:16 +0000 (01:09 +0800)]
Documentations: correct net_cachelines title for struct inet_sock

The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agostmmac: Clear variable when destroying workqueue
Jakub Raczynski [Mon, 26 Feb 2024 16:42:32 +0000 (17:42 +0100)]
stmmac: Clear variable when destroying workqueue

Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.

This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.

To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.

Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
           <Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004

Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agonet: hsr: Fix typo in the hsr_forward_do() function comment
Lukasz Majewski [Mon, 26 Feb 2024 15:09:54 +0000 (16:09 +0100)]
net: hsr: Fix typo in the hsr_forward_do() function comment

Correct type in the hsr_forward_do() comment.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agonet: ethernet: adi: move PHYLIB from vendor to driver symbol
Randy Dunlap [Mon, 26 Feb 2024 07:48:20 +0000 (23:48 -0800)]
net: ethernet: adi: move PHYLIB from vendor to driver symbol

In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.

Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agoMerge tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git...
Jakub Kicinski [Wed, 28 Feb 2024 03:19:16 +0000 (19:19 -0800)]
Merge tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.8-rc7

Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.

* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: only call drv_sta_rc_update for uploaded stations
  MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
  MAINTAINERS: wifi: update Jeff Johnson e-mail address
  wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
  wifi: iwlwifi: mvm: ensure offloading TID queue exists
  wifi: nl80211: reject iftype change with mesh ID change
====================

Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agouapi: in6: replace temporary label with rfc9486
Justin Iurman [Mon, 26 Feb 2024 12:49:21 +0000 (13:49 +0100)]
uapi: in6: replace temporary label with rfc9486

Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agonet: lan78xx: fix "softirq work is pending" error
Oleksij Rempel [Mon, 26 Feb 2024 11:08:20 +0000 (12:08 +0100)]
net: lan78xx: fix "softirq work is pending" error

Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!

Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agonet: stmmac: Complete meta data only when enabled
Kurt Kanzenbach [Sun, 25 Feb 2024 11:38:37 +0000 (12:38 +0100)]
net: stmmac: Complete meta data only when enabled

Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:

|[  255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[  255.822764] Call trace:
|[  255.822766]  stmmac_tx_clean.constprop.0+0x848/0xc38

The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.

Tested on imx93 without XDP, with XDP and with XDP/ZC.

Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agonet: usb: dm9601: fix wrong return value in dm9601_mdio_read
Javier Carrasco [Sat, 24 Feb 2024 23:20:06 +0000 (00:20 +0100)]
net: usb: dm9601: fix wrong return value in dm9601_mdio_read

The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.

An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).

Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.

Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoMerge tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Linus Torvalds [Wed, 28 Feb 2024 01:00:10 +0000 (17:00 -0800)]
Merge tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm fixes from Paul Moore:
 "Two small patches, one for AppArmor and one for SELinux, to fix
  potential uninitialized variable problems in the new LSM syscalls we
  added during the v6.8 merge window.

  We haven't been able to get a response from John on the AppArmor
  patch, but considering both the importance of the patch and it's
  rather simple nature it seems like a good idea to get this merged
  sooner rather than later.

  I'm sure John is just taking some much needed vacation; if we need to
  revise this when he gets back to his email we can"

* tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  apparmor: fix lsm_get_self_attr()
  selinux: fix lsm_get_self_attr()

8 months agoMerge tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Wed, 28 Feb 2024 00:44:15 +0000 (16:44 -0800)]
Merge tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Six hotfixes. Three are cc:stable and the remainder address post-6.7
  issues or aren't considered appropriate for backporting"

* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
  mm: cachestat: fix folio read-after-free in cache walk
  MAINTAINERS: add memory mapping entry with reviewers
  mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
  kasan: revert eviction of stack traces in generic mode
  stackdepot: use variable size records for non-evictable entries

8 months agoveth: try harder when allocating queue memory
Jakub Kicinski [Fri, 23 Feb 2024 23:59:08 +0000 (15:59 -0800)]
veth: try harder when allocating queue memory

struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.

Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.

Reported-and-tested-by: Miao Wang <shankerwangmiao@gmail.com>
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agospi: Drop mismerged fix
Mark Brown [Tue, 27 Feb 2024 12:52:51 +0000 (12:52 +0000)]
spi: Drop mismerged fix

One patch of a series of three that was sent fixing issues with the
ppc4xx driver was targeted at -next, unfortunately it being sandwiched
between two others that targeted mainline tripped up my workflow and
caused it to get merged along with the others.  The ppc4xx driver is
only buildable in very limited configurations so none of the CI catches
issues with it.

Fixes: de4af897ddf2 ("spi: ppc4xx: Fix fallout from rename in struct spi_bitbang")
Signed-off-by: Mark Brown <broonie@kernel.org>
8 months agoMerge branch 'ionic-pci-error-handling-fixes'
Paolo Abeni [Tue, 27 Feb 2024 12:03:34 +0000 (13:03 +0100)]
Merge branch 'ionic-pci-error-handling-fixes'

Shannon Nelson says:

====================
ionic: PCI error handling fixes

These are a few things to make our PCI reset handling better.
====================

Link: https://lore.kernel.org/r/20240223222742.13923-1-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoionic: restore netdev feature bits after reset
Shannon Nelson [Fri, 23 Feb 2024 22:27:42 +0000 (14:27 -0800)]
ionic: restore netdev feature bits after reset

When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init.  This prevents losing user changes to things like TSO
or vlan tagging states.

Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoionic: check cmd_regs before copying in or out
Shannon Nelson [Fri, 23 Feb 2024 22:27:41 +0000 (14:27 -0800)]
ionic: check cmd_regs before copying in or out

Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).

Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoionic: check before releasing pci regions
Shannon Nelson [Fri, 23 Feb 2024 22:27:40 +0000 (14:27 -0800)]
ionic: check before releasing pci regions

AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler.  The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time.  We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources.  This prevents a harmless but disturbing
warning message
    resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>

Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8 months agoMerge branch 'mptcp-more-misc-fixes-for-v6-8'
Jakub Kicinski [Tue, 27 Feb 2024 02:42:04 +0000 (18:42 -0800)]
Merge branch 'mptcp-more-misc-fixes-for-v6-8'

Matthieu Baerts says:

====================
mptcp: more misc. fixes for v6.8

This series includes 6 types of fixes:

- Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM,
  when asking to delete a subflow. It was done everywhere else, but not
  there. Patch 2 validates the modification, thanks to a subtest in
  mptcp_join.sh. These patches can be backported up to v5.19.

- Patch 3 is a small fix for a recent bug-fix patch, just to avoid
  printing an irrelevant warning (pr_warn()) once. It can be backported
  up to v5.6, alongside the bug-fix that has been introduced in the
  v6.8-rc5.

- Patches 4 to 6 are fixes for bugs found by Paolo while working on
  TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the
  performances in some cases. Patches can be backported up to v5.6,
  v5.11 and v6.7 respectively.

- Patch 7 makes sure 'ss -M' is available when starting MPTCP Join
  selftest as it is required for some subtests since v5.18.

- Patch 8 fixes a possible double-free on socket dismantle. The issue
  always existed, but was unnoticed because it was not causing any
  problem so far. This fix can be backported up to v5.6.

- Patch 9 is a fix for a very recent patch causing lockdep warnings in
  subflow diag. The patch causing the regression -- which fixes another
  issue present since v5.7 -- should be part of the future v6.8-rc6.
  Patch 10 validates the modification, thanks to a new subtest in
  diag.sh.
====================

Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoselftests: mptcp: explicitly trigger the listener diag code-path
Paolo Abeni [Fri, 23 Feb 2024 16:14:20 +0000 (17:14 +0100)]
selftests: mptcp: explicitly trigger the listener diag code-path

The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.

Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.

Be careful to cope with very slow environments.

Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: fix possible deadlock in subflow diag
Paolo Abeni [Fri, 23 Feb 2024 16:14:19 +0000 (17:14 +0100)]
mptcp: fix possible deadlock in subflow diag

Syzbot and Eric reported a lockdep splat in the subflow diag:

   WARNING: possible circular locking dependency detected
   6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted

   syz-executor.2/24141 is trying to acquire lock:
   ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
   tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
   ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at:
   tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137

   but task is already holding lock:
   ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock
   include/linux/spinlock.h:351 [inline]
   ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at:
   inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}:
   lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
   __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
   _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
   spin_lock include/linux/spinlock.h:351 [inline]
   __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743
   inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261
   __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217
   inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239
   rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316
   rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577
   ops_init+0x352/0x610 net/core/net_namespace.c:136
   __register_pernet_operations net/core/net_namespace.c:1214 [inline]
   register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283
   register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370
   rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735
   do_one_initcall+0x238/0x830 init/main.c:1236
   do_initcall_level+0x157/0x210 init/main.c:1298
   do_initcalls+0x3f/0x80 init/main.c:1314
   kernel_init_freeable+0x42f/0x5d0 init/main.c:1551
   kernel_init+0x1d/0x2a0 init/main.c:1441
   ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
   ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242

   -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}:
   check_prev_add kernel/locking/lockdep.c:3134 [inline]
   check_prevs_add kernel/locking/lockdep.c:3253 [inline]
   validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
   __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
   lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
   lock_sock_fast include/net/sock.h:1723 [inline]
   subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28
   tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline]
   tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137
   inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345
   inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061
   __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263
   inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371
   netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264
   __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370
   netlink_dump_start include/linux/netlink.h:338 [inline]
   inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405
   sock_diag_rcv_msg+0xe7/0x410
   netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
   sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
   netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
   netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
   netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0x221/0x270 net/socket.c:745
   ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
   ___sys_sendmsg net/socket.c:2638 [inline]
   __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
   do_syscall_64+0xf9/0x240
   entry_SYSCALL_64_after_hwframe+0x6f/0x77

As noted by Eric we can break the lock dependency chain avoid
dumping any extended info for the mptcp subflow listener:
nothing actually useful is presented there.

Fixes: b8adb69a7d29 ("mptcp: fix lockless access in subflow ULP diag")
Cc: stable@vger.kernel.org
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iJ=Oecw6OZDwmSYc9HJKQ_G32uN11L+oUcMu+TOD5Xiaw@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-9-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: fix double-free on socket dismantle
Davide Caratti [Fri, 23 Feb 2024 16:14:18 +0000 (17:14 +0100)]
mptcp: fix double-free on socket dismantle

when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:

  BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
  Free of addr ffff888485950880 by task swapper/25/0

  CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
  Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0  07/26/2013
  Call Trace:
   <IRQ>
   dump_stack_lvl+0x32/0x50
   print_report+0xca/0x620
   kasan_report_invalid_free+0x64/0x90
   __kasan_slab_free+0x1aa/0x1f0
   kfree+0xed/0x2e0
   inet_sock_destruct+0x54f/0x8b0
   __sk_destruct+0x48/0x5b0
   rcu_do_batch+0x34e/0xd90
   rcu_core+0x559/0xac0
   __do_softirq+0x183/0x5a4
   irq_exit_rcu+0x12d/0x170
   sysvec_apic_timer_interrupt+0x6b/0x80
   </IRQ>
   <TASK>
   asm_sysvec_apic_timer_interrupt+0x16/0x20
  RIP: 0010:cpuidle_enter_state+0x175/0x300
  Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
  RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
  RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
  RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
  RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
  R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
  R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
   cpuidle_enter+0x4a/0xa0
   do_idle+0x310/0x410
   cpu_startup_entry+0x51/0x60
   start_secondary+0x211/0x270
   secondary_startup_64_no_verify+0x184/0x18b
   </TASK>

  Allocated by task 6853:
   kasan_save_stack+0x1c/0x40
   kasan_save_track+0x10/0x30
   __kasan_kmalloc+0xa6/0xb0
   __kmalloc+0x1eb/0x450
   cipso_v4_sock_setattr+0x96/0x360
   netlbl_sock_setattr+0x132/0x1f0
   selinux_netlbl_socket_post_create+0x6c/0x110
   selinux_socket_post_create+0x37b/0x7f0
   security_socket_post_create+0x63/0xb0
   __sock_create+0x305/0x450
   __sys_socket_create.part.23+0xbd/0x130
   __sys_socket+0x37/0xb0
   __x64_sys_socket+0x6f/0xb0
   do_syscall_64+0x83/0x160
   entry_SYSCALL_64_after_hwframe+0x6e/0x76

  Freed by task 6858:
   kasan_save_stack+0x1c/0x40
   kasan_save_track+0x10/0x30
   kasan_save_free_info+0x3b/0x60
   __kasan_slab_free+0x12c/0x1f0
   kfree+0xed/0x2e0
   inet_sock_destruct+0x54f/0x8b0
   __sk_destruct+0x48/0x5b0
   subflow_ulp_release+0x1f0/0x250
   tcp_cleanup_ulp+0x6e/0x110
   tcp_v4_destroy_sock+0x5a/0x3a0
   inet_csk_destroy_sock+0x135/0x390
   tcp_fin+0x416/0x5c0
   tcp_data_queue+0x1bc8/0x4310
   tcp_rcv_state_process+0x15a3/0x47b0
   tcp_v4_do_rcv+0x2c1/0x990
   tcp_v4_rcv+0x41fb/0x5ed0
   ip_protocol_deliver_rcu+0x6d/0x9f0
   ip_local_deliver_finish+0x278/0x360
   ip_local_deliver+0x182/0x2c0
   ip_rcv+0xb5/0x1c0
   __netif_receive_skb_one_core+0x16e/0x1b0
   process_backlog+0x1e3/0x650
   __napi_poll+0xa6/0x500
   net_rx_action+0x740/0xbb0
   __do_softirq+0x183/0x5a4

  The buggy address belongs to the object at ffff888485950880
   which belongs to the cache kmalloc-64 of size 64
  The buggy address is located 0 bytes inside of
   64-byte region [ffff888485950880ffff8884859508c0)

  The buggy address belongs to the physical page:
  page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
  flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
  page_type: 0xffffffff()
  raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
  raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
   ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  >ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                     ^
   ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
   ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc

Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.

Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoselftests: mptcp: join: add ss mptcp support check
Geliang Tang [Fri, 23 Feb 2024 16:14:17 +0000 (17:14 +0100)]
selftests: mptcp: join: add ss mptcp support check

Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.

Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: fix potential wake-up event loss
Paolo Abeni [Fri, 23 Feb 2024 16:14:16 +0000 (17:14 +0100)]
mptcp: fix potential wake-up event loss

After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.

We must check for write space even after such change or we risk
missing the wake-up event.

Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: fix snd_wnd initialization for passive socket
Paolo Abeni [Fri, 23 Feb 2024 16:14:15 +0000 (17:14 +0100)]
mptcp: fix snd_wnd initialization for passive socket

Such value should be inherited from the first subflow, but
passive sockets always used 'rsk_rcv_wnd'.

Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-5-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: push at DSS boundaries
Paolo Abeni [Fri, 23 Feb 2024 16:14:14 +0000 (17:14 +0100)]
mptcp: push at DSS boundaries

when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.

Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.

Explicitly mark the end of not contiguous DSS with the push flag.

Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: avoid printing warning once on client side
Matthieu Baerts (NGI0) [Fri, 23 Feb 2024 16:14:13 +0000 (17:14 +0100)]
mptcp: avoid printing warning once on client side

After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:

  MPTCP: bogus mpc option on established client sk

That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.

Fixes: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoselftests: mptcp: rm subflow with v4/v4mapped addr
Geliang Tang [Fri, 23 Feb 2024 16:14:12 +0000 (17:14 +0100)]
selftests: mptcp: rm subflow with v4/v4mapped addr

Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agomptcp: map v4 address to v6 when destroying subflow
Geliang Tang [Fri, 23 Feb 2024 16:14:11 +0000 (17:14 +0100)]
mptcp: map v4 address to v6 when destroying subflow

Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:

    userspace_pm_add_addr $ns1 10.0.2.1 10
    userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED

That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.

This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agodpll: rely on rcu for netdev_dpll_pin()
Eric Dumazet [Fri, 23 Feb 2024 12:32:08 +0000 (12:32 +0000)]
dpll: rely on rcu for netdev_dpll_pin()

This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.

Add rcu protection to "struct dpll_pin"

Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.

Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.

v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)

Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agolan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected
Oleksij Rempel [Thu, 22 Feb 2024 12:38:38 +0000 (13:38 +0100)]
lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected

Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.

Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.

Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 months agoMerge tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 26 Feb 2024 19:06:30 +0000 (11:06 -0800)]
Merge tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
 "Many NAND page layouts have been added to the Marvell NAND controller
  but could not be used in practice so they are being removed.

  Regarding the SPI-NAND area, Gigadevice chips were not using the right
  buffer for an ECC status check operation.

  Aside from these driver fixes, there is also a refcount fix in the MTD
  core nodes parsing logic"

* tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: marvell: fix layouts
  mtd: Fix possible refcounting issue when going through partition nodes
  mtd: spinand: gigadevice: Fix the get ecc status issue

8 months agoMerge tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
Linus Torvalds [Mon, 26 Feb 2024 19:00:54 +0000 (11:00 -0800)]
Merge tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A  more fixes for recently reported or discovered problems:

   - fix corner case of send that would generate potentially large
     stream of zeros if there's a hole at the end of the file

   - fix chunk validation in zoned mode on conventional zones, it was
     possible to create chunks that would not be allowed on sequential
     zones

   - fix validation of dev-replace ioctl filenames

   - fix KCSAN warnings about access to block reserve struct members"

* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve
  btrfs: fix data races when accessing the reserved amount of block reserves
  btrfs: send: don't issue unnecessary zero writes for trailing hole
  btrfs: dev-replace: properly validate device names
  btrfs: zoned: don't skip block group profile checks on conventional zones

8 months agofs/ntfs3: fix build without CONFIG_NTFS3_LZX_XPRESS
Mark O'Donovan [Wed, 21 Feb 2024 10:43:58 +0000 (10:43 +0000)]
fs/ntfs3: fix build without CONFIG_NTFS3_LZX_XPRESS

When CONFIG_NTFS3_LZX_XPRESS is not set then we get the following build
error:

  fs/ntfs3/frecord.c:2460:16: error: unused variable ‘i_size’

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Fixes: 4fd6c08a16d7 ("fs/ntfs3: Use i_size_read and i_size_write")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 months agolandlock: Fix asymmetric private inodes referring
Mickaël Salaün [Mon, 19 Feb 2024 19:03:45 +0000 (20:03 +0100)]
landlock: Fix asymmetric private inodes referring

When linking or renaming a file, if only one of the source or
destination directory is backed by an S_PRIVATE inode, then the related
set of layer masks would be used as uninitialized by
is_access_to_paths_allowed().  This would result to indeterministic
access for one side instead of always being allowed.

This bug could only be triggered with a mounted filesystem containing
both S_PRIVATE and !S_PRIVATE inodes, which doesn't seem possible.

The collect_domain_accesses() calls return early if
is_nouser_or_private() returns false, which means that the directory's
superblock has SB_NOUSER or its inode has S_PRIVATE.  Because rename or
link actions are only allowed on the same mounted filesystem, the
superblock is always the same for both source and destination
directories.  However, it might be possible in theory to have an
S_PRIVATE parent source inode with an !S_PRIVATE parent destination
inode, or vice versa.

To make sure this case is not an issue, explicitly initialized both set
of layer masks to 0, which means to allow all actions on the related
side.  If at least on side has !S_PRIVATE, then
collect_domain_accesses() and is_access_to_paths_allowed() check for the
required access rights.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shervin Oloumi <enlightened@chromium.org>
Cc: stable@vger.kernel.org
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Link: https://lore.kernel.org/r/20240219190345.2928627-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
8 months agoipv6: fix potential "struct net" leak in inet6_rtm_getaddr()
Eric Dumazet [Thu, 22 Feb 2024 12:17:47 +0000 (12:17 +0000)]
ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()

It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.

Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agoselftests: net: veth: test syncing GRO and XDP state while device is down
Jakub Kicinski [Wed, 21 Feb 2024 23:12:11 +0000 (15:12 -0800)]
selftests: net: veth: test syncing GRO and XDP state while device is down

Test that we keep GRO flag in sync when XDP is disabled while
the device is closed.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agonet: veth: clear GRO when clearing XDP even when down
Jakub Kicinski [Wed, 21 Feb 2024 23:12:10 +0000 (15:12 -0800)]
net: veth: clear GRO when clearing XDP even when down

veth sets NETIF_F_GRO automatically when XDP is enabled,
because both features use the same NAPI machinery.

The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which
is called both on ndo_stop and when XDP is turned off.
To avoid the flag from being cleared when the device is brought
down, the clearing is skipped when IFF_UP is not set.
Bringing the device down should indeed not modify its features.

Unfortunately, this means that clearing is also skipped when
XDP is disabled _while_ the device is down. And there's nothing
on the open path to bring the device features back into sync.
IOW if user enables XDP, disables it and then brings the device
up we'll end up with a stray GRO flag set but no NAPI instances.

We don't depend on the GRO flag on the datapath, so the datapath
won't crash. We will crash (or hang), however, next time features
are sync'ed (either by user via ethtool or peer changing its config).
The GRO flag will go away, and veth will try to disable the NAPIs.
But the open path never created them since XDP was off, the GRO flag
was a stray. If NAPI was initialized before we'll hang in napi_disable().
If it never was we'll crash trying to stop uninitialized hrtimer.

Move the GRO flag updates to the XDP enable / disable paths,
instead of mixing them with the ndo_open / ndo_close paths.

Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+039399a9b96297ddedca@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 months agoLinux 6.8-rc6
Linus Torvalds [Sun, 25 Feb 2024 23:46:06 +0000 (15:46 -0800)]
Linux 6.8-rc6

8 months agoMerge tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs
Linus Torvalds [Sun, 25 Feb 2024 23:31:57 +0000 (15:31 -0800)]
Merge tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Some more mostly boring fixes, but some not

  User reported ones:

   - the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
     performance bug; user reported an untar initially taking two
     seconds and then ~2 minutes

   - kill a __GFP_NOFAIL in the buffered read path; this was a leftover
     from the trickier fix to kill __GFP_NOFAIL in readahead, where we
     can't return errors (and have to silently truncate the read
     ourselves).

     bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
     filesystems because our folio state is just barely too big, 2MB
     hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.

     additionally, the flags argument was just buggy, we weren't
     supplying GFP_KERNEL previously (!)"

* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: fix bch2_save_backtrace()
  bcachefs: Fix check_snapshot() memcpy
  bcachefs: Fix bch2_journal_flush_device_pins()
  bcachefs: fix iov_iter count underflow on sub-block dio read
  bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
  bcachefs: Kill __GFP_NOFAIL in buffered read path
  bcachefs: fix backpointer_to_text() when dev does not exist

8 months agobcachefs: fix bch2_save_backtrace()
Kent Overstreet [Sun, 25 Feb 2024 20:45:34 +0000 (15:45 -0500)]
bcachefs: fix bch2_save_backtrace()

Missed a call in the previous fix.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
8 months agoMerge tag 'docs-6.8-fixes3' of git://git.lwn.net/linux
Linus Torvalds [Sun, 25 Feb 2024 18:58:12 +0000 (10:58 -0800)]
Merge tag 'docs-6.8-fixes3' of git://git.lwn.net/linux

Pull two documentation build fixes from Jonathan Corbet:

 - The XFS online fsck documentation uses incredibly deeply nested
   subsection and list nesting; that broke the PDF docs build. Tweak a
   parameter to tell LaTeX to allow the deeper nesting.

 - Fix a 6.8 PDF-build regression

* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
  docs: translations: use attribute to store current language
  docs: Instruct LaTeX to cope with deeper nesting

8 months agoMerge tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 25 Feb 2024 18:41:57 +0000 (10:41 -0800)]
Merge tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.8-rc6 to resolve some reported
  problems. These include:

   - regression fixes with typec tpcm code as reported by many

   - cdnsp and cdns3 driver fixes

   - usb role setting code bugfixes

   - build fix for uhci driver

   - ncm gadget driver bugfix

   - MAINTAINERS entry update

  All of these have been in linux-next all week with no reported issues
  and there is at least one fix in here that is in Thorsten's regression
  list that is being tracked"

* tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tpcm: Fix issues with power being removed during reset
  MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers
  usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
  Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
  usb: gadget: omap_udc: fix USB gadget regression on Palm TE
  usb: dwc3: gadget: Don't disconnect if not started
  usb: cdns3: fix memory double free when handle zero packet
  usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
  usb: roles: don't get/set_role() when usb_role_switch is unregistered
  usb: roles: fix NULL pointer issue when put module's reference
  usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
  usb: cdnsp: blocked some cdns3 specific code
  usb: uhci-grlib: Explicitly include linux/platform_device.h

8 months agoMerge tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Sun, 25 Feb 2024 18:35:41 +0000 (10:35 -0800)]
Merge tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are three small serial/tty driver fixes for 6.8-rc6 that resolve
  the following reported errors:

   - riscv hvc console driver fix that was reported by many

   - amba-pl011 serial driver fix for RS485 mode

   - stm32 serial driver fix for RS485 mode

  All of these have been in linux-next all week with no reported
  problems"

* tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: amba-pl011: Fix DMA transmission in RS485 mode
  serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
  tty: hvc: Don't enable the RISC-V SBI console by default

8 months agoMerge tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 25 Feb 2024 18:22:21 +0000 (10:22 -0800)]
Merge tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Make sure clearing CPU buffers using VERW happens at the latest
   possible point in the return-to-userspace path, otherwise memory
   accesses after the VERW execution could cause data to land in CPU
   buffers again

* tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM/VMX: Move VERW closer to VMentry for MDS mitigation
  KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
  x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
  x86/entry_32: Add VERW just before userspace transition
  x86/entry_64: Add VERW just before userspace transition
  x86/bugs: Add asm helpers for executing VERW

8 months agoMerge tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 25 Feb 2024 18:14:12 +0000 (10:14 -0800)]
Merge tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

 - Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
   from silently failing to set it up

 - Do not call bus_get_dev_root() for the mbigen irqchip as it always
   returns NULL - use NULL directly

 - Fix hardware interrupt number truncation when assigning MSI
   interrupts

 - Correct sending end-of-interrupt messages to disabled interrupts
   lines on RISC-V PLIC

* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Do not assume vPE tables are preallocated
  irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
  PCI/MSI: Prevent MSI hardware interrupt number truncation
  irqchip/sifive-plic: Enable interrupt if needed before EOI

8 months agoMerge tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 25 Feb 2024 17:53:13 +0000 (09:53 -0800)]
Merge tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs

Pull erofs fix from Gao Xiang:

 - Fix page refcount leak when looking up specific inodes
   introduced by metabuf reworking

* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix refcount on the metabuf used for inode lookup

8 months agoMerge tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 25 Feb 2024 17:29:05 +0000 (09:29 -0800)]
Merge tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull RCU pathwalk fixes from Al Viro:
 "We still have some races in filesystem methods when exposed to RCU
  pathwalk. This series is a result of code audit (the second round of
  it) and it should deal with most of that stuff.

  Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
  Up to maintainers (a note for NTFS folks - when documentation says
  that a method may not block, it *does* imply that blocking allocations
  are to be avoided. Really)"

[ More explanations for people who aren't familiar with the vagaries of
  RCU path walking: most of it is hidden from filesystems, but if a
  filesystem actively participates in the low-level path walking it
  needs to make sure the fields involved in that walk are RCU-safe.

  That "actively participate in low-level path walking" includes things
  like having its own ->d_hash()/->d_compare() routines, or by having
  its own directory permission function that doesn't just use the common
  helpers.  Having a ->d_revalidate() function will also have this issue.

  Note that instead of making everything RCU safe you can also choose to
  abort the RCU pathwalk if your operation cannot be done safely under
  RCU, but that obviously comes with a performance penalty. One common
  pattern is to allow the simple cases under RCU, and abort only if you
  need to do something more complicated.

  So not everything needs to be RCU-safe, and things like the inode etc
  that the VFS itself maintains obviously already are. But these fixes
  tend to be about properly RCU-delaying things like ->s_fs_info that
  are maintained by the filesystem and that got potentially released too
  early.   - Linus ]

* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ext4_get_link(): fix breakage in RCU mode
  cifs_get_link(): bail out in unsafe case
  fuse: fix UAF in rcu pathwalks
  procfs: make freeing proc_fs_info rcu-delayed
  procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
  nfs: fix UAF on pathwalk running into umount
  nfs: make nfs_set_verifier() safe for use in RCU pathwalk
  afs: fix __afs_break_callback() / afs_drop_open_mmap() race
  hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
  exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
  affs: free affs_sb_info with kfree_rcu()
  rcu pathwalk: prevent bogus hard errors from may_lookup()
  fs/super.c: don't drop ->s_user_ns until we free struct super_block itself

8 months agoMerge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sun, 25 Feb 2024 17:17:15 +0000 (09:17 -0800)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
 "A couple of fixes - revert of regression from this cycle and a fix for
  erofs failure exit breakage (had been there since way back)"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  erofs: fix handling kern_mount() failure
  Revert "get rid of DCACHE_GENOCIDE"

8 months agoext4_get_link(): fix breakage in RCU mode
Al Viro [Sat, 3 Feb 2024 06:17:34 +0000 (01:17 -0500)]
ext4_get_link(): fix breakage in RCU mode

1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
8 months agocifs_get_link(): bail out in unsafe case
Al Viro [Wed, 20 Sep 2023 02:28:16 +0000 (22:28 -0400)]
cifs_get_link(): bail out in unsafe case

->d_revalidate() bails out there, anyway.  It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup.  Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
8 months agofuse: fix UAF in rcu pathwalks
Al Viro [Thu, 28 Sep 2023 04:19:39 +0000 (00:19 -0400)]
fuse: fix UAF in rcu pathwalks

->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.

Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
8 months agoprocfs: make freeing proc_fs_info rcu-delayed
Al Viro [Wed, 20 Sep 2023 04:12:00 +0000 (00:12 -0400)]
procfs: make freeing proc_fs_info rcu-delayed

makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
8 months agoprocfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
Al Viro [Wed, 20 Sep 2023 03:52:58 +0000 (23:52 -0400)]
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()

that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>