Linus Torvalds [Fri, 27 Mar 2020 20:52:32 +0000 (13:52 -0700)]
Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT and driver fixes from Arnd Bergmann:
"For the devicetree files, there are a total of 20 patches, almost
entirely for 32-bit machines:
- The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
both for correctness and for style that are addressed in separate
patches. This causes most of the changed lines of the DT updates
this time.
- More Allwinner updates fixing the identification of the security
system on sun8i/A33, a recent regression of the A83t ethernet, and
a few board specific issues on the TBS-A711 macine.
- Several bug fixes for OMAP dts files, most notably fixing the
timings for the NAND flash on the Nokia N900 that regressed a while
ago after the move to configuring them from DT. Some other OMAPs
now set the correct dma limits on the L3 bus, and a regression fix
addresses lost Ethernet on dm814x
- One incorrect setting in the newly added Raspberry Pi Zero W that
may cause issues with the SD card controller.
- A missing property on the bcm2835 firmware node caused incorrect
DMA settings.
- An old bug on the oxnas platform causing spurious interrupts is
finally addressed.
- A regression on the Exynos Midas board broke the OLED panel power
supply.
- The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
is now set to the values from the datasheet.
- Some 64-bit machines use a deprecated string to identify the PSCI
firmware.
There are also several small code fixes addressing mostly serious
issues:
- Fix the sunxi rsb bus access to no longer return incorrect data
when mixing 8 and 16 bit I/O.
- Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
quirk in the ti-sysc driver
- Fix a NULL pointer access from a race in the fsl dpio driver
- Fix a v5.5 regression in the exynos-chipid driver that caused an
invalid error code probing the device on non-exynos platforms
- Fix an out-of-bounds access in the AMD TEE driver"
* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: chipid: Fix return value on non-Exynos platforms
arm64: dts: Fix leftover entry-methods for PSCI
ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
ARM: dts: oxnas: Fix clear-mask property
ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
ARM: dts: omap5: Add bus_dma_limit for L3 bus
ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
ARM: dts: dra7: Add bus_dma_limit for L3 bus
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
ARM: dts: sun8i: a33: add the new SS compatible
dt-bindings: crypto: add new compatible for A33 SS
ARM: dts: sun8i: r40: Move SPI device nodes based on address order
ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
ARM: dts: sun8i: r40: Move AHCI device node based on address order
ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
soc: fsl: dpio: register dpio irq handlers after dpio create
tee: amdtee: out of bounds read in find_session()
ARM: dts: N900: fix onenand timings
bus: ti-sysc: Fix quirk flags for lcdc on am335x
ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
...
This patch adds two new tracpoints for null_blk_zoned.c that allows us
to trace report-zones, zone-mgmt-op and zone-write operations which has
direct effect on the zone condition state machine.
Also, we update drivers/block/Makefile so that new null_blk related
tracefiles can be compiled.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 27 Mar 2020 18:06:10 +0000 (11:06 -0700)]
Merge tag 'riscv-for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Sorry for the last minute patches, but a few things fell through the
cracks recently. I was on the fence about sending a late pull request
just for the M-mode fixes, as we don't really have any users, but the
last patch fixes the build for Fedora which I consider pretty
important.
Given that the M-mode fixes should be very low risk, I figured it's
worth sending them along as well.
Thhis passes my standard 'boot in QEMU' test"
* tag 'riscv-for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Move all address space definition macros to one place
RISC-V: Only select essential drivers for SOC_VIRT config
riscv: fix the IPI missing issue in nommu mode
riscv: uaccess should be used in nommu mode
The bio_map_* helpers are just the low-level helpers for the
blk_rq_map_* APIs. Move them together for better logical grouping,
as no there isn't much overlap with other code in bio.c.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide more information about __ex_table sorting post link.
The exception tables and fixup tables use a commonly recurring pattern
in the kernel of storing the address of labels as date in custom ELF
sections, then finding these sections, iterating elements within them,
and possibly revisiting them or modifying the data at these addresses.
Sorting readonly arrays to minimize runtime penalties is quite clever.
Linus Torvalds [Fri, 27 Mar 2020 16:33:48 +0000 (09:33 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes.
Mostly they're around the i.MX drivers fixing the parents of a few
clks and making KASAN happy with how the message passing code works.
Besides that we have a TI driver fix for the RTC parent and a fix for
the basic gate type registration functions introduced this release
where they didn't actually pass the arguments in the right places to
the multiplexer function down below"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx: Align imx sc clock parent msg structs to 4
clk: imx: Align imx sc clock msg structs to 4
clk: Pass correct arguments to __clk_hw_register_gate()
clk: ti: am43xx: Fix clock parent for RTC clock
clk: imx8mp: Correct the enet_qos parent clock
clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parent
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
bcache: pass the make_request methods to blk_queue_make_request
bcache is the only driver not actually passing its make_request
methods to blk_queue_make_request, but instead just sets them up
manually a little later. Make bcache follow the common way of
setting up make_request based queues.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows a driver to pass a queuedata member before ->init_hctx is
called. null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 27 Mar 2020 16:21:52 +0000 (09:21 -0700)]
Merge tag 'drm-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty quiet: some minor sg mapping fixes for 3 drivers, and a single
oops fix for the scheduler. I'm hoping nobody tries to send me a fixes
pull today but I'll keep an eye out of the weekend.
radeon/amdgpu/dma-buf:
- sg list fixes
scheduler:
- oops fix"
* tag 'drm-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm:
drm/scheduler: fix rare NULL ptr race
drm/radeon: fix scatter-gather mapping with user pages
drm/amdgpu: fix scatter-gather mapping with user pages
drm/prime: use dma length macro when mapping sg
Linus Walleij [Tue, 17 Mar 2020 09:49:14 +0000 (10:49 +0100)]
spi: efm32: Convert to use GPIO descriptors
This switches the EFM32 driver over to use the GPIO descriptor
handling in the core. The GPIO handling in this driver is
pretty simplistic so this should just work. Drop the GPIO headers
and insert the implicitly included <linux/of.h> header.
Matthias Reichl [Fri, 27 Mar 2020 15:03:50 +0000 (16:03 +0100)]
USB: cdc-acm: restore capability check order
commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
introduced a regression by changing the order of capability and close
settings change checks. When running with CAP_SYS_ADMIN setting the
close settings to the values already set resulted in -EOPNOTSUPP.
Fix this by changing the check order back to how it was before.
Fixes: b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20200327150350.3657-1-hias@horus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
This reverts commit c442a0d18744d4a5857d513f171d68ed6a54df5b as it
breaks some of the Raspberry Pi devices. Marek writes:
This patch has just landed in linux-next 20200326. Sadly it
breaks booting of the Raspberry Pi3b and Pi4 boards, either in
32bit or 64bit mode. There is no warning nor panic message, just
a silent freeze. The last message shown on the earlycon is:
Xiaoguang Wang [Fri, 27 Mar 2020 07:36:52 +0000 (15:36 +0800)]
io_uring: cleanup io_alloc_async_ctx()
Cleanup io_alloc_async_ctx() a bit, add a new __io_alloc_async_ctx(),
so io_setup_async_rw() won't need to check whether async_ctx is true
or false again.
Dirk Mueller [Tue, 14 Jan 2020 17:53:41 +0000 (18:53 +0100)]
scripts/dtc: Remove redundant YYLOC global declaration
gcc 10 will default to -fno-common, which causes this error at link
time:
(.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
This is because both dtc-lexer as well as dtc-parser define the same
global symbol yyloc. Before with -fcommon those were merged into one
defintion. The proper solution would be to to mark this as "extern",
however that leads to:
dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
26 | extern YYLTYPE yylloc;
| ^~~~~~
In file included from dtc-lexer.l:24:
dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
127 | extern YYLTYPE yylloc;
| ^~~~~~
cc1: all warnings being treated as errors
which means the declaration is completely redundant and can just be
dropped.
Signed-off-by: Dirk Mueller <dmueller@suse.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
Xiaoyao Li [Wed, 25 Mar 2020 03:09:24 +0000 (11:09 +0800)]
x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR
In a context switch from a task that is detecting split locks to one that
is not (or vice versa) we need to update the TEST_CTRL MSR. Currently this
is done with the common sequence:
read the MSR
flip the bit
write the MSR
in order to avoid changing the value of any reserved bits in the MSR.
Cache unused and reserved bits of TEST_CTRL MSR with SPLIT_LOCK_DETECT bit
cleared during initialization, so we can avoid an expensive RDMSR
instruction during context switch.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Originally-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200325030924.132881-3-xiaoyao.li@intel.com
Xiaoyao Li [Wed, 25 Mar 2020 03:09:23 +0000 (11:09 +0800)]
x86/split_lock: Rework the initialization flow of split lock detection
Current initialization flow of split lock detection has following issues:
1. It assumes the initial value of MSR_TEST_CTRL.SPLIT_LOCK_DETECT to be
zero. However, it's possible that BIOS/firmware has set it.
2. X86_FEATURE_SPLIT_LOCK_DETECT flag is unconditionally set even if
there is a virtualization flaw that FMS indicates the existence while
it's actually not supported.
Rework the initialization flow to solve above issues. In detail, explicitly
clear and set split_lock_detect bit to verify MSR_TEST_CTRL can be
accessed, and rdmsr after wrmsr to ensure bit is cleared/set successfully.
X86_FEATURE_SPLIT_LOCK_DETECT flag is set only when the feature does exist
and the feature is not disabled with kernel param "split_lock_detect=off"
On each processor, explicitly updating the SPLIT_LOCK_DETECT bit based on
sld_sate in split_lock_init() since BIOS/firmware may touch it.
Marek Vasut [Wed, 25 Mar 2020 14:25:47 +0000 (15:25 +0100)]
net: ks8851-ml: Fix IO operations, again
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.
While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.
Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.
Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Atish Patra [Thu, 26 Mar 2020 22:55:46 +0000 (15:55 -0700)]
RISC-V: Move all address space definition macros to one place
We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set.
---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
#define __pfn_to_page(pfn) (vmemmap + (pfn))
^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’
#define pfn_to_page __pfn_to_page
^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------
Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.
David Howells [Thu, 26 Mar 2020 15:24:07 +0000 (15:24 +0000)]
afs: Fix unpinned address list during probing
When it's probing all of a fileserver's interfaces to find which one is
best to use, afs_do_probe_fileserver() takes a lock on the server record
and notes the pointer to the address list.
It doesn't, however, pin the address list, so as soon as it drops the
lock, there's nothing to stop the address list from being freed under
us.
Fix this by taking a ref on the address list inside the locked section
and dropping it at the end of the function.
Fixes: 3bf0fb6f33dd ("afs: Probe multiple fileservers simultaneously") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 26 Mar 2020 22:44:41 +0000 (15:44 -0700)]
Merge tag 'ceph-for-5.6-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch for a rather old regression in fullness handling and two
memory leak fixes, marked for stable"
* tag 'ceph-for-5.6-rc8' of git://github.com/ceph/ceph-client:
ceph: fix memory leak in ceph_cleanup_snapid_map()
libceph: fix alloc_msg_with_page_vector() memory leaks
ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL
Linus Torvalds [Thu, 26 Mar 2020 22:30:49 +0000 (15:30 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"x86 bug fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Narrow down the IPI fastpath to single target IPI
KVM: LAPIC: Also cancel preemption timer when disarm LAPIC timer
KVM: VMX: don't allow memory operands for inline asm that modifies SP
KVM: LAPIC: Mark hrtimer for period or oneshot mode to expire in hard interrupt context
KVM: SVM: Issue WBINVD after deactivating an SEV guest
KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV is available
KVM: x86: remove bogus user-triggerable WARN_ON
Linus Torvalds [Thu, 26 Mar 2020 22:12:19 +0000 (15:12 -0700)]
MAINTAINERS: fix bad file pattern
Testing 'parse-maintainers' due to the previous commit shows a bad file
pattern for the "TI VPE/CAL DRIVERS" entry in the MAINTAINERS file.
There's also a lot of mis-ordered entries, but I'm still a bit nervous
about the inevitable and annoying merge problems it would probably cause
to fix them up.
The MAINTAINERS file is one of my least favorite files due to being huge
and centralized, but fixing it is also horribly painful for that reason.
Joe Perches [Sun, 8 Mar 2020 02:59:05 +0000 (18:59 -0800)]
parse-maintainers: Do not sort section content by default
Add an --order switch to control section reordering.
Default for --order is off.
Change the default ordering to a slightly more sensible:
M: Person acting as a maintainer
R: Person acting as a patch reviewer
L: Mailing list where patches should be sent
S: Maintenance status
W: URI for general information
Q: URI for patchwork tracking
B: URI for bug tracking/submission
C: URI for chat
P: URI or file for subsystem specific coding styles
T: SCM tree type and location
F: File and directory pattern
X: File and directory exclusion pattern
N: File glob
K: Keyword - patch content regex
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Torokhov [Thu, 26 Mar 2020 19:54:02 +0000 (12:54 -0700)]
Input: move the new KEY_SELECTIVE_SCREENSHOT keycode
We should try to keep keycodes sequential unless there is a reason to leave
a gap in numbering, so let's move it from 0x280 to 0x27a while we still
can.
Fixes: 3b059da9835c ("Input: allocate keycode for Selective Screenshot key") Acked-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200326182711.GA259753@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The initial policy value set by intel_pstate_cpu_init() depends on
whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but
that is not necessary, because the core will set the policy to
"performance" in cpufreq_init_policy() if the default governor is
"performance" anyway.
Accordingly, change intel_pstate_cpu_init() to always set policy
to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback
value to cpufreq_init_policy() in case the default cpufreq governor
is neither "powersave" nor "performance".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Doug Smythies [Thu, 26 Mar 2020 16:20:07 +0000 (09:20 -0700)]
tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
A fixed y-axis scale was missed during a change to autoscale.
Correct it.
Fixes: 709bd70d070ee ("tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis") Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
David S. Miller [Thu, 26 Mar 2020 19:03:02 +0000 (12:03 -0700)]
Merge tag 'mac80211-for-net-2020-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have the following fixes:
* drop data packets if there's no key for them anymore, after
there had been one, to avoid sending them in clear when
hostapd removes the key before it removes the station and
the packets are still queued
* check port authorization again after dequeue, to avoid
sending packets if the station is no longer authorized
* actually remove the authorization flag before the key so
packets are also dropped properly because of this
* fix nl80211 control port packet tagging to handle them as
packets allowed to go out without encryption
* fix NL80211_ATTR_CHANNEL_WIDTH outgoing netlink attribute
width (should be 32 bits, not 8)
* don't WARN in a CSA scenario that happens on some APs
* fix HE spatial reuse element size calculation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 26 Mar 2020 14:17:33 +0000 (16:17 +0200)]
mlxsw: spectrum_mr: Fix list iteration in error path
list_for_each_entry_from_reverse() iterates backwards over the list from
the current position, but in the error path we should start from the
previous position.
Fix this by using list_for_each_entry_continue_reverse() instead.
This suppresses the following error from coccinelle:
drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR:
invalid reference to the index variable of the iterator on line 636
Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 26 Mar 2020 17:39:36 +0000 (10:39 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A small set of late-rc patches, mostly fixes for various crashers,
some syzkaller fixes and a mlx5 HW limitation:
- Several MAINTAINERS updates
- Memory leak regression in ODP
- Several fixes for syzkaller related crashes. Google recently taught
syzkaller to create the software RDMA devices
- Crash fixes for HFI1
- Several fixes for mlx5 crashes
- Prevent unprivileged access to an unsafe mlx5 HW resource"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Block delay drop to unprivileged users
RDMA/mlx5: Fix access to wrong pointer while performing flush due to error
RDMA/core: Ensure security pkey modify is not lost
MAINTAINERS: Clean RXE section and add Zhu as RXE maintainer
IB/hfi1: Ensure pq is not left on waitlist
IB/rdmavt: Free kernel completion queue when done
RDMA/mad: Do not crash if the rdma device does not have a umad interface
RDMA/core: Fix missing error check on dev_set_name()
RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET
RDMA/mlx5: Fix the number of hwcounters of a dynamic counter
MAINTAINERS: Update maintainers for HISILICON ROCE DRIVER
RDMA/odp: Fix leaking the tgid for implicit ODP
ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to
libata-sata.c
* add static inline for ata_eh_analyze_ncq_error() for
CONFIG_SATA_HOST=n case (link->sactive is non-zero only if
NCQ commands are actually queued so empty function body is
sufficient)
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
16164 18 0 16182 3f36 drivers/ata/libata-eh.o
after:
15446 18 0 15464 3c68 drivers/ata/libata-eh.o
ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow
compiler to optimize out the function for non-SATA configs (for
PATA hosts "ap && !ap->ops->set_lpm" condition is always true so
it's sufficient for the function to return zero).
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
17353 18 0 17371 43db drivers/ata/libata-eh.o
after:
16607 18 0 16625 40f1 drivers/ata/libata-eh.o
ata: separate PATA timings code from libata-core.c
Separate PATA timings code from libata-core.c:
* add PATA_TIMINGS config option and make corresponding PATA
host drivers (and ATA ACPI code) select it
* move following PATA timings code to libata-pata-timings.c:
- ata_timing_quantize()
- ata_timing_merge()
- ata_timing_find_mode()
- ata_timing_compute()
* group above functions together in <linux/libata.h>
* include libata-pata-timings.c in the build when PATA_TIMINGS
config option is enabled
* cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it
depends on code from libata-core.c and libata-pata-timings.c
while its only user is ATA ACPI)
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
39688 573 40 40301 9d6d drivers/ata/libata-core.o
after:
37820 572 40 38432 9620 drivers/ata/libata-core.o
ata: move EXPORT_SYMBOL_GPL()s close to exported code
Move EXPORT_SYMBOL_GPL()s close to exported code like it is
done in other kernel subsystems. As a nice side effect this
results in the removal of few ifdefs.
ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[]
size as libata parameters buffer doesn't need to be bigger than
the command line buffer.
For many architectures this results in decreased libata-core.o
size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum
PAGE_SIZE is 4096).
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
41064 4413 40 45517 b1cd drivers/ata/libata-core.o
after:
41064 573 40 41677 a2cd drivers/ata/libata-core.o
Initialize rbuf[] directly instead of using ata_tf_to_fis(). This
results in simpler and smaller code. It also allows separating
ata_tf_to_fis() into SATA specific libata part in the future.
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
20824 105 4096 25025 61c1 drivers/ata/libata-scsi.o
after:
20782 105 4096 24983 6197 drivers/ata/libata-scsi.o
ata: make SATA_PMP option selectable only if any SATA host driver is enabled
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.
This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.
CC: "James E.J. Bottomley" <jejb@linux.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
ata: remove stale maintainership information from core code
In commit 7634ccd2da97 ("libata: maintainership update") from 2018
Jens has officially taken over libata maintainership from Tejun so
remove stale information from core libata code.
George Spelvin [Thu, 26 Mar 2020 15:23:36 +0000 (15:23 +0000)]
staging: wilc1000: Use crc7 in lib/ rather than a private copy
The code in lib/ is the desired polynomial, and even includes
the 1-bit left shift in the table rather than needing to code
it explicitly.
While I'm in Kconfig, add a description of what a WILC1000 is.
Kconfig questions that require me to look up a data sheet to
find out that I probably don't have one are a pet peeve.
Sam Muhammed [Thu, 26 Mar 2020 15:02:36 +0000 (11:02 -0400)]
Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
Use netdev_warn() over printk().
netdev_warn() is specific for printing warning
messages for network devices, and preferable
over printk(KERN_WARNING ...).
Sam Muhammed [Thu, 26 Mar 2020 15:02:35 +0000 (11:02 -0400)]
Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
Replace printk(KERN_DEBUG ...) with netdev_dbg() across the driver.
since netdev_dbg() is preferable and specific for
printing debug messages for network devices.
Johannes Berg [Thu, 26 Mar 2020 14:53:34 +0000 (15:53 +0100)]
mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
When a frame is transmitted via the nl80211 TX rather than as a
normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and
this will lead to wrong decisions (rate control etc.) being made
about the frame; fix this.
Johannes Berg [Thu, 26 Mar 2020 14:51:35 +0000 (15:51 +0100)]
mac80211: mark station unauthorized before key removal
If a station is still marked as authorized, mark it as no longer
so before removing its keys. This allows frames transmitted to it
to be rejected, providing additional protection against leaking
plain text data during the disconnection flow.
Jouni Malinen [Thu, 26 Mar 2020 14:51:34 +0000 (15:51 +0100)]
mac80211: Check port authorization in the ieee80211_tx_dequeue() case
mac80211 used to check port authorization in the Data frame enqueue case
when going through start_xmit(). However, that authorization status may
change while the frame is waiting in a queue. Add a similar check in the
dequeue case to avoid sending previously accepted frames after
authorization change. This provides additional protection against
potential leaking of frames after a station has been disconnected and
the keys for it are being removed.
Ilan Peer [Thu, 26 Mar 2020 13:09:43 +0000 (15:09 +0200)]
cfg80211: Do not warn on same channel at the end of CSA
When cfg80211_update_assoc_bss_entry() is called, there is a
verification that the BSS channel actually changed. As some APs use
CSA also for bandwidth changes, this would result with a kernel
warning.
Johannes Berg [Thu, 26 Mar 2020 13:09:42 +0000 (15:09 +0200)]
mac80211: drop data frames without key on encrypted links
If we know that we have an encrypted link (based on having had
a key configured for TX in the past) then drop all data frames
in the key selection handler if there's no key anymore.
This fixes an issue with mac80211 internal TXQs - there we can
buffer frames for an encrypted link, but then if the key is no
longer there when they're dequeued, the frames are sent without
encryption. This happens if a station is disconnected while the
frames are still on the TXQ.
Detecting that a link should be encrypted based on a first key
having been configured for TX is fine as there are no use cases
for a connection going from with encryption to no encryption.
With extended key IDs, however, there is a case of having a key
configured for only decryption, so we can't just trigger this
behaviour on a key being configured.
Simran Singhal [Thu, 26 Mar 2020 13:28:23 +0000 (18:58 +0530)]
staging: rtl8723bs: hal: Remove NULL check before kfree
NULL check before kfree is unnecessary so remove it.
The following Coccinelle script was used to detect this:
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
Simran Singhal [Thu, 26 Mar 2020 11:32:10 +0000 (17:02 +0530)]
staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
Assignment to a typed pointer is sufficient in C.
No cast is needed.
The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T*)x)->f
|
Michael Straube [Thu, 26 Mar 2020 08:43:48 +0000 (09:43 +0100)]
staging: rtl8188eu: cleanup long line in odm.c
Cleanup line over 80 characters by removing unnecessary test
'pDM_Odm->RSSI_Min <= 25'. The above test 'pDM_Odm->RSSI_Min > 25'
already guarantees that it is <= 25.
Yintian Tao [Mon, 23 Mar 2020 11:19:37 +0000 (19:19 +0800)]
drm/scheduler: fix rare NULL ptr race
There is one one corner case at dma_fence_signal_locked
which will raise the NULL pointer problem just like below.
->dma_fence_signal
->dma_fence_signal_locked
->test_and_set_bit
here trigger dma_fence_release happen due to the zero of fence refcount.
->dma_fence_put
->dma_fence_release
->drm_sched_fence_release_scheduled
->call_rcu
here make the union fled “cb_list” at finished fence
to NULL because struct rcu_head contains two pointer
which is same as struct list_head cb_list
Therefore, to hold the reference of finished fence at drm_sched_process_job
to prevent the null pointer during finished fence dma_fence_signal
v2: hold the finished fence at drm_sched_process_job instead of
amdgpu_fence_process
v3: resume the blank line
Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
usb: gadget: f_fs: Fix use after free issue as part of queue failure
In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.
Wanpeng Li [Thu, 26 Mar 2020 02:20:01 +0000 (10:20 +0800)]
KVM: X86: Narrow down the IPI fastpath to single target IPI
The original single target IPI fastpath patch forgot to filter the
ICR destination shorthand field. Multicast IPI is not suitable for
this feature since wakeup the multiple sleeping vCPUs will extend
the interrupt disabled time, it especially worse in the over-subscribe
and VM has a little bit more vCPUs scenario. Let's narrow it down to
single target IPI.
Two VMs, each is 76 vCPUs, one running 'ebizzy -M', the other
running cyclictest on all vCPUs, w/ this patch, the avg score
of cyclictest can improve more than 5%. (pv tlb, pv ipi, pv
sched yield are disabled during testing to avoid the disturb).
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585189202-1708-3-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>