In initial design, walk_page_range() was designed just for walking page
table and it didn't require mmap_sem. Now, find_vma() etc.. are used
in walk_page_range() and we need mmap_sem around it.
This patch adds mmap_sem around walk_page_range().
Because /proc/<pid>/pagemap's callback routine use put_user(), we have
to get rid of it to do sane fix.
Changelog: 2010/Apr/2
- fixed start_vaddr and end overflow
Changelog: 2010/Apr/1
- fixed start_vaddr calculation
- removed unnecessary cast.
- removed unnecessary change in smaps.
- use GFP_TEMPORARY instead of GFP_KERNEL
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Matt Mackall <mpm@selenic.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: San Mehat <san@google.com> Cc: Brian Swetland <swetland@google.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org>
[ Fixed kmalloc failure return code as per Matt ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
powerpc/fsl: add device tree binding for QE firmware
of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
Clemens Ladisch [Fri, 2 Apr 2010 16:46:06 +0000 (18:46 +0200)]
PCI quirk: RS780/RS880: disable MSI behind the PCI bridge
The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines. To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.
[rjw: Added the PCI_VENDOR_ID_AI quirk.]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: Turn off tracing while in the debugger
kgdb: use atomic_inc and atomic_dec instead of atomic_set
kgdb: eliminate kgdb_wait(), all cpus enter the same way
kgdbts,sh: Add in breakpoint pc offset for superh
kgdb: have ebin2mem call probe_kernel_write once
Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
Freezer: Only show the state of tasks refusing to freeze
Jason Wessel [Fri, 2 Apr 2010 16:47:02 +0000 (11:47 -0500)]
kgdb: eliminate kgdb_wait(), all cpus enter the same way
This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.
A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.
A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.
Previously the salve cpu would have called kgdb_wait(). This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 2 Apr 2010 16:33:29 +0000 (11:33 -0500)]
kgdb: have ebin2mem call probe_kernel_write once
Rather than call probe_kernel_write() one byte at a time, process the
whole buffer locally and pass the entire result in one go. This way,
architectures that need to do special handling based on the length can
do so, or we only end up calling memcpy() once.
[sonic.zhang@analog.com: Reported original problem and preliminary patch]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Add NOGET quirk for Quanta Pixart touchscreen
HID: fix oops in gyration_event()
Merge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix up the SH-3 build for recent TLB changes.
sh: export return_address() symbol.
sh: Enable the mmu in start_secondary()
sh: Fix FDPIC binary loader
arch/sh/kernel: Use set_cpus_allowed_ptr
sh: Update ecovec_defconfig
USB gadget r8a66597-udc.c: duplicated include
sh: update the TLB replacement counter for entry wiring.
Paul Mundt [Fri, 2 Apr 2010 07:13:27 +0000 (16:13 +0900)]
sh: Fix up the SH-3 build for recent TLB changes.
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4
and later TLBs, these features are absent on SH-3. This splits out
local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the
old SH-3 one, subsequently fixing up the build.
This will probably want some further reordering and tidying in the
future, but that's out of scope at present.
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (76 commits)
drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
drm/radeon/kms: rs400/480 should set common registers.
drm/radeon/kms: add sanity check to wptr.
drm/radeon/kms/evergreen: get DP working
drm/radeon/kms: add hw_i2c module option
drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
drm/radeon/kms: disable MSI on IGP chips
drm/radeon/kms: display watermark updates (v2)
drm/radeon/kms/dp: disable training pattern on the sink at the end of link training
drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
drm/radeon/kms/dp: remove extraneous training complete call
drm/radeon/kms/atom: minor fixes to transmitter setup
drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
drm: fix build error when SYSRQ is disabled
drm/radeon/kms: fix macbookpro connector quirk
drm/radeon/r6xx/r7xx: further safe reg clean up
drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
drm/radeon/kms: bump the version for r6xx/r7xx const buffer support
drm/radeon/r6xx/r7xx: CS parser fixes
drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
...
Fix up MSI-related conflicts in drivers/gpu/drm/radeon/radeon_irq_kms.c
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (35 commits)
microblaze: Support word copying in copy_tofrom_user
microblaze: Print early printk information to log buffer
microblaze: head.S typo fix
microblaze: Use MICROBLAZE_TLB_SIZE in asm code
microblaze: Kconfig Fix - pci
microblaze: Adding likely macros
microblaze: Add .type and .size to ASM functions
microblaze: Fix TLB macros
microblaze: Use instruction with delay slot
microblaze: Remove additional resr and rear loading
microblaze: Change register usage for ESR and EAR
microblaze: Prepare work for optimization in exception code
microblaze: Add DEBUG option
microblaze: Support systems without lmb bram
microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
microblaze: uaccess: Unify __copy_tofrom_user
microblaze: uaccess: Move functions to generic location
microblaze: uaccess: Fix put_user for noMMU
microblaze: uaccess: Fix get_user macro for noMMU
microblaze: uaccess: fix clear_user for noMMU kernel
...
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
asus-laptop: fix warning in asus_handle_init
oom: fix the unsafe usage of badness() in proc_oom_score()
proc_oom_score(task) has a reference to task_struct, but that is all.
If this task was already released before we take tasklist_lock
- we can't use task->group_leader, it points to nowhere
- it is not safe to call badness() even if this task is
->group_leader, has_intersects_mems_allowed() assumes
it is safe to iterate over ->thread_group list.
- even worse, badness() can hit ->signal == NULL
Add the pid_alive() check to ensure __unhash_process() was not called.
Also, use "task" instead of task->group_leader. badness() should return
the same result for any sub-thread. Currently this is not true, but
this should be changed anyway.
Michal Simek [Mon, 15 Mar 2010 07:48:27 +0000 (08:48 +0100)]
microblaze: Support systems without lmb bram
When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.
DTS fragment could look like:
DDR2_SDRAM: memory@0 {
device_type = "memory";
reg = < 0x0 0x10000000 >;
} ;
Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.
You have to solve how to load the kernel before cpu starts.
Tested with XMD.
Dave Airlie [Wed, 31 Mar 2010 03:38:56 +0000 (13:38 +1000)]
drm/radeon/kms: add sanity check to wptr.
If we resume in a bad way, we'll get 0xffffffff in wptr, and then
oops with no console. This just adds a sanity check so that we can
avoid the oops and hopefully get more details out of people's systems.
Corentin Chary [Tue, 2 Mar 2010 21:24:12 +0000 (22:24 +0100)]
asus-laptop: fix warning in asus_handle_init
In function 'asus_laptop_get_info':
warning: passing argument 3 of 'asus_handle_init' from incompatible pointer type
note: expected 'char **' but argument is of type 'const char **'
Nikolaus Schulz [Wed, 31 Mar 2010 17:21:10 +0000 (02:21 +0900)]
fat: fix buffer overflow in vfat_create_shortname()
When using the string representation of a random counter as part of the base
name, ensure that it is no longer than 4 bytes.
Since we are repeatedly decrementing the counter in a loop until we have found a
unique base name, the counter may wrap around zero; therefore, it is not enough
to mask its higher bits before entering the loop, this must be done inside the
loop.
Alex Deucher [Wed, 17 Mar 2010 06:07:37 +0000 (02:07 -0400)]
drm/radeon/kms: add hw_i2c module option
Turn off hw i2c by default except for mm i2c which
is hw only until we sort out the remaining prescale
issues on older chips. hw i2c can be enabled with
hw_i2c=1.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 14 Mar 2010 16:22:44 +0000 (12:22 -0400)]
drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
This allows us to remove the internal bit algo bus used by
the radeon i2c algo. We now register a radeon algo adapter
if the gpio line is hw capable and the hw inplementation is
available, otherwise we register a bit algo adapter.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 31 Mar 2010 04:33:27 +0000 (00:33 -0400)]
drm/radeon/kms: display watermark updates (v2)
- Add module option to force the display priority
0 = auto, 1 = normal, 2 = high
- Default to high on r3xx/r4xx/rv515 chips
Fixes flickering problems during heavy acceleration
due to underflow to the display controllers
- Fill in minimal support for RS600
v2 - update display priority when bandwidth is updated
so the user can change the parameter at runtime and it
will take affect on the next modeset.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 30 Mar 2010 01:37:08 +0000 (21:37 -0400)]
drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
Some systems have LCD* rather than DFP* device tags in the bios
for eDP connectors; notably the new apple iMac. This fixes
things up so eDP connectors with either tag will work.
v2: fix typo
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Thu, 25 Mar 2010 18:29:05 +0000 (18:29 +0000)]
drm: fix build error when SYSRQ is disabled
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled:
drivers/gpu/drm/drm_fb_helper.c:915: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
drivers/gpu/drm/drm_fb_helper.c:929: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 18:52:32 +0000 (14:52 -0400)]
drm/radeon/r6xx/r7xx: CS parser fixes
- Drop some more safe regs taht userspace shouldn't hit
- Constant base regs need relocs. This allows us to use
constant buffers rather than the constant register file.
Also we don't want userspace to be able to set arbitrary
mc base values for the const caches.
- Track SQ_CONFIG so we know whether userspace is using
the cfile or constant buffers.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Thu, 18 Mar 2010 11:56:54 +0000 (11:56 +0000)]
drm: Return ENODEV if the inode mapping changes
Replace a BUG_ON with an error code in the event that the inode mapping
changes between calls to drm_open. This may happen for instance if udev
is loaded subsequent to the original opening of the device:
Pauli Nieminen [Fri, 19 Mar 2010 07:44:33 +0000 (07:44 +0000)]
drm/radeon/kms: Fix NULL pointer dereference if memory allocation failed.
When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs
is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini
when clean up code is trying to loop over the relocation array and free the
objects.
Fix adds a check for a possible NULL pointer in clean up code.
Signed-off-by: Pauli Nieminen <suokkos@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 17 Mar 2010 14:44:29 +0000 (14:44 +0000)]
drm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)
radeon_gart_fini might call GART unbind callback function which
might try to access GART table but if gart_disable is call first
the GART table will be unmapped so any access to it will oops.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 17 Mar 2010 23:50:59 +0000 (19:50 -0400)]
drm/radeon/kms: remove lvds quirks
- no longer needed with the latest new pll algo fixes.
- also don't use lcd pll limits. They don't seem
to work well for all systems. If we have a case where
they are useful, we can set the flag for that case.
fixes fdo bug 27083
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 21 Mar 2010 18:02:25 +0000 (14:02 -0400)]
drm/radeon/kms: never treat rs4xx as AGP
RS4xx+ IGP chips use an internal gart, however,
some of them have the agp cap bits set in their pci
configs. Make sure to clear the AGP flag as AGP will
not work with them.
Should fix fdo bug 27225
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 17 Mar 2010 00:54:38 +0000 (20:54 -0400)]
drm/radeon/kms: display watermark fixes
- rs780/880 were using the wrong bandwidth functions
- convert r1xx-r4xx to use the same pm sclk/mclk structs as
r5xx+
- move bandwidth setup to a common function
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
The error label releases the lock before calling journal_release_error,
but it requires that the lock be held. do_journal_release unlocks and
retakes it. When it releases it without it held, we trigger a BUG().
The error_alloc label skips the unlock since the lock isn't held yet
but none of the other conditions that are clean up exist yet either.
This patch returns immediately after the kzalloc failure and moves
the reiserfs_write_unlock after the journal_release_error call.
This was reported in https://bugzilla.novell.com/show_bug.cgi?id=591807
Reported-by: Thomas Siedentopf <thomas.siedentopf@novell.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Thomas Siedentopf <thomas.siedentopf@novell.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: 2.6.33.x <stable@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
projects / mirror_ubuntu-artful-kernel.git / log