]> git.proxmox.com Git - mirror_ubuntu-kernels.git/log
mirror_ubuntu-kernels.git
7 years agords: remove unnecessary returned value check
Zhu Yanjun [Fri, 3 Mar 2017 05:44:26 +0000 (00:44 -0500)]
rds: remove unnecessary returned value check

The function rds_trans_register always returns 0. As such, it is not
necessary to check the returned value.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agorxrpc: Fix potential NULL-pointer exception
David Howells [Thu, 2 Mar 2017 23:48:52 +0000 (23:48 +0000)]
rxrpc: Fix potential NULL-pointer exception

Fix a potential NULL-pointer exception in rxrpc_do_sendmsg().  The call
state check that I added should have gone into the else-body of the
if-statement where we actually have a call to check.

Found by CoverityScan CID#1414316 ("Dereference after null check").

Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'nfp-fixes'
David S. Miller [Fri, 3 Mar 2017 17:46:54 +0000 (09:46 -0800)]
Merge branch 'nfp-fixes'

Jakub Kicinski says:

====================
nfp: RX and XDP buffer fixes

Two trivial fixes for code introduced with XDP support.  First
one corrects the buffer size we populate a register with.  The
register is designed to be used for scatter transfers which
the driver (and most FWs) don't support so it's not critical.
The other one for DMA direction is mostly cosmetic, DMA API
doesn't seem to care today about the precise direction in sync
calls.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: correct DMA direction in XDP DMA sync
Jakub Kicinski [Thu, 2 Mar 2017 23:26:21 +0000 (15:26 -0800)]
nfp: correct DMA direction in XDP DMA sync

dma_sync_single_for_*() takes the direction in which the buffer
was mapped, not the direction of the sync.  We should sync XDP
buffers bidirectionally.

Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: don't tell FW about the reserved buffer space
Jakub Kicinski [Thu, 2 Mar 2017 23:26:20 +0000 (15:26 -0800)]
nfp: don't tell FW about the reserved buffer space

Since commit c0f031bc8866 ("nfp_net: use alloc_frag() and build_skb()")
we are allocating buffers which have to hold both the data and skb to
be created in place by build_skb().

FW should only be told about the buffer space it can DMA to, that
is without the build_skb() headroom and tailroom.  Note: firmware
applications should validate the buffers against both MTU and
free list buffer size so oversized packets would not pass through
the NIC anyway.

Fixes: c0f031bc8866 ("nfp: use alloc_frag() and build_skb()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'bgmac-fixes'
David S. Miller [Fri, 3 Mar 2017 17:44:28 +0000 (09:44 -0800)]
Merge branch 'bgmac-fixes'

Jon Mason says:

====================
net: ethernet: bgmac: bug fixes

Changes in v5:
* Rebased to the latest code and fixed up a compile error due to the
  mac_addr struct going away (found by David Miller)

Changes in v4:
* Added the udelays from the previous code (per David Miller)

Changes in v3:
* Reworked the init sequence patch to only remove the device reset if
  the device is actually in reset.  Given that this code doesn't bear
  much resemblance to the original code, I'm changing the author of the
  patch.  This was tested on NS2 SVK.

Changes in v2:
* Reworked the first match to make it more obvious what portions of the
  register were being preserved (Per Rafal Mileki)
* Style change to reorder the function variables in patch 2 (per Sergei
  Shtylyov)

Bug fixes for bgmac driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: bgmac: mac address change bug
Hari Vyas [Thu, 2 Mar 2017 22:59:57 +0000 (17:59 -0500)]
net: ethernet: bgmac: mac address change bug

ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to
bgmac_set_mac_address() but code assumed u8 *.  This caused two bytes
chopping and the wrong mac address was configured.

Signed-off-by: Hari Vyas <hariv@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 4e209001b86 ("bgmac: write mac address to hardware in ndo_set_mac_address")
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: bgmac: init sequence bug
Jon Mason [Thu, 2 Mar 2017 22:59:56 +0000 (17:59 -0500)]
net: ethernet: bgmac: init sequence bug

Fix a bug in the 'bgmac' driver init sequence that blind writes for init
sequence where it should preserve most bits other than the ones it is
deliberately manipulating.

The code now checks to see if the adapter needs to be brought out of
reset (where as before it was doing an IDM write to bring it out of
reset regardless of whether it was in reset or not).  Also, removed
unnecessary usleeps (as there is already a read present to flush the
IDM writes).

Signed-off-by: Zac Schroff <zschroff@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f6a95a24957 ("net: ethernet: bgmac: Add platform device support")
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'xen-netback-fixes'
David S. Miller [Fri, 3 Mar 2017 17:36:15 +0000 (09:36 -0800)]
Merge branch 'xen-netback-fixes'

Paul Durrant says:

====================
xen-netback: update memory leak fix to avoid BUG

Commit 9a6cdf52b85e "xen-netback: fix memory leaks on XenBus disconnect"
added missing code to fix a memory leak by calling vfree() in the
appropriate place.
Unfortunately subsequent commit f16f1df65f1c "xen-netback: protect
resource cleaning on XenBus disconnect" then wrapped this call to vfree()
in a spin lock, leading to a BUG due to incorrect context.

Patch #1 makes the existing code more readable
Patch #2 fixes the problem
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxen-netback: don't vfree() queues under spinlock
Paul Durrant [Thu, 2 Mar 2017 12:54:26 +0000 (12:54 +0000)]
xen-netback: don't vfree() queues under spinlock

This leads to a BUG of the following form:

[  174.512861] switch: port 2(vif3.0) entered disabled state
[  174.522735] BUG: sleeping function called from invalid context at
/home/build/linux-linus/mm/vmalloc.c:1441
[  174.523451] in_atomic(): 1, irqs_disabled(): 0, pid: 28, name: xenwatch
[  174.524131] CPU: 1 PID: 28 Comm: xenwatch Tainted: G        W
4.10.0upstream-11073-g4977ab6-dirty #1
[  174.524819] Hardware name: MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0
03/14/2011
[  174.525517] Call Trace:
[  174.526217]  show_stack+0x23/0x60
[  174.526899]  dump_stack+0x5b/0x88
[  174.527562]  ___might_sleep+0xde/0x130
[  174.528208]  __might_sleep+0x35/0xa0
[  174.528840]  ? _raw_spin_unlock_irqrestore+0x13/0x20
[  174.529463]  ? __wake_up+0x40/0x50
[  174.530089]  remove_vm_area+0x20/0x90
[  174.530724]  __vunmap+0x1d/0xc0
[  174.531346]  ? delete_object_full+0x13/0x20
[  174.531973]  vfree+0x40/0x80
[  174.532594]  set_backend_state+0x18a/0xa90
[  174.533221]  ? dwc_scan_descriptors+0x24d/0x430
[  174.533850]  ? kfree+0x5b/0xc0
[  174.534476]  ? xenbus_read+0x3d/0x50
[  174.535101]  ? xenbus_read+0x3d/0x50
[  174.535718]  ? xenbus_gather+0x31/0x90
[  174.536332]  ? ___might_sleep+0xf6/0x130
[  174.536945]  frontend_changed+0x6b/0xd0
[  174.537565]  xenbus_otherend_changed+0x7d/0x80
[  174.538185]  frontend_changed+0x12/0x20
[  174.538803]  xenwatch_thread+0x74/0x110
[  174.539417]  ? woken_wake_function+0x20/0x20
[  174.540049]  kthread+0xe5/0x120
[  174.540663]  ? xenbus_printf+0x50/0x50
[  174.541278]  ? __kthread_init_worker+0x40/0x40
[  174.541898]  ret_from_fork+0x21/0x2c
[  174.548635] switch: port 2(vif3.0) entered disabled state

This patch defers the vfree() until after the spinlock is released.

Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxen-netback: keep a local pointer for vif in backend_disconnect()
Paul Durrant [Thu, 2 Mar 2017 12:54:25 +0000 (12:54 +0000)]
xen-netback: keep a local pointer for vif in backend_disconnect()

This patch replaces use of 'be->vif' with 'vif' and hence generally
makes the function look tidier. No semantic change.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Fri, 3 Mar 2017 17:29:49 +0000 (09:29 -0800)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2017-03-02

This series contains fixes to ixgbe only.

Paolo fixes the driver so that you can actually update the RSS key value
via ethtool.

Alex fixes an issue on architectures that have a cache line size larger
than 64 Bytes, where the amount of headroom for the frame starts
shrinking.  To take this into account, Alex adds one small check so that
we compare the max_frame to the amount of actual data we can store, so
we will automatically enable 3K receive buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
Alexander Duyck [Fri, 3 Feb 2017 17:19:40 +0000 (09:19 -0800)]
ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines

On architectures that have a cache line size larger than 64 Bytes we start
running into issues where the amount of headroom for the frame starts
shrinking.

The size of skb_shared_info on a system with a 64B L1 cache line size is
320.  This increases to 384 with a 128B cache line, and 512 with a 256B
cache line.

In addition the NET_SKB_PAD value increases as well consistent with the
cache line size.  As a result when we get to a 256B cache line as seen on
the s390 we end up 768 bytes used by padding and shared info leaving us
with only 1280 bytes to use for data storage.  On architectures such as
this we should default to using 3K Rx buffers out of a 8K page instead of
trying to do 1.5K buffers out of a 4K page.

To take all of this into account I have added one small check so that we
compare the max_frame to the amount of actual data we can store.  This was
already occurring for igb, but I had overlooked it for ixgbe as it doesn't
have strict limits for 82599 once we enable jumbo frames.  By adding this
check we will automatically enable 3K Rx buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.

I also went through and fixed one small typo that I found where I had left
an IGB in a variable name due to a copy/paste error.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
7 years agoixgbe: update the rss key on h/w, when ethtool ask for it
Paolo Abeni [Thu, 15 Dec 2016 14:20:34 +0000 (15:20 +0100)]
ixgbe: update the rss key on h/w, when ethtool ask for it

Currently ixgbe_set_rxfh() updates the rss_key copy in the driver
memory, but does not push the new value into the h/w. This commit
add a new helper for the latter operation and call it in
ixgbe_set_rxfh(), so that the h/w rss key value can be really
updated via ethtool.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
7 years agoxen-netback: Use GFP_ATOMIC to allocate hash
Anoob Soman [Thu, 2 Mar 2017 10:50:20 +0000 (10:50 +0000)]
xen-netback: Use GFP_ATOMIC to allocate hash

Allocation of new_hash, inside xenvif_new_hash(), always happen
in softirq context, so use GFP_ATOMIC instead of GFP_KERNEL for new
hash allocation.

Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobonding: use ETH_MAX_MTU as max mtu
WANG Cong [Thu, 2 Mar 2017 20:24:36 +0000 (12:24 -0800)]
bonding: use ETH_MAX_MTU as max mtu

This restores the ability of setting bond device's mtu to 9000.

Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra")
Reported-by: daznis@gmail.com
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonetvsc: fix use-after-free in netvsc_change_mtu()
Dexuan Cui [Thu, 2 Mar 2017 13:00:53 +0000 (13:00 +0000)]
netvsc: fix use-after-free in netvsc_change_mtu()

'nvdev' is freed in rndis_filter_device_remove -> netvsc_device_remove ->
free_netvsc_device, so we mustn't access it, before it's re-created in
rndis_filter_device_add -> netvsc_device_add.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'mac80211-for-davem-2017-03-02' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Thu, 2 Mar 2017 22:39:17 +0000 (14:39 -0800)]
Merge tag 'mac80211-for-davem-2017-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
This contains just the average.h change in order to get it
into the tree before adding new users through -next trees.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'wireless-drivers-for-davem-2017-03-02' of git://git.kernel.org/pub/scm...
David S. Miller [Thu, 2 Mar 2017 22:38:42 +0000 (14:38 -0800)]
Merge tag 'wireless-drivers-for-davem-2017-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.11

Add back a fixed version of an ath10k patch which was reverted during
the merge window.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv6: ignore null_entry in inet6_rtm_getroute() too
WANG Cong [Thu, 2 Mar 2017 04:48:39 +0000 (20:48 -0800)]
ipv6: ignore null_entry in inet6_rtm_getroute() too

Like commit 1f17e2f2c8a8 ("net: ipv6: ignore null_entry on route dumps"),
we need to ignore null entry in inet6_rtm_getroute() too.

Return -ENETUNREACH here to sync with IPv4 behavior, as suggested by David.

Fixes: a1a22c1206 ("net: ipv6: Keep nexthop of multipath route on admin down")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodrivers: net: ethernet: remove incorrect __exit markups
Dmitry Torokhov [Thu, 2 Mar 2017 01:24:47 +0000 (17:24 -0800)]
drivers: net: ethernet: remove incorrect __exit markups

Even if bus is not hot-pluggable, devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: fix potential double free issue for fastopen_req
Wei Wang [Wed, 1 Mar 2017 21:29:48 +0000 (13:29 -0800)]
tcp: fix potential double free issue for fastopen_req

tp->fastopen_req could potentially be double freed if a malicious
user does the following:
1. Enable TCP_FASTOPEN_CONNECT sockopt and do a connect() on the socket.
2. Call connect() with AF_UNSPEC to disconnect the socket.
3. Make this socket a listening socket by calling listen().
4. Accept incoming connections and generate child sockets. All child
   sockets will get a copy of the pointer of fastopen_req.
5. Call close() on all sockets. fastopen_req will get freed multiple
   times.

Fixes: 19f6d3f3c842 ("net/tcp-fastopen: Add new API support")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: Introduce sk_clone_lock() error path routine
Arnaldo Carvalho de Melo [Wed, 1 Mar 2017 19:35:08 +0000 (16:35 -0300)]
net: Introduce sk_clone_lock() error path routine

When handling problems in cloning a socket with the sk_clone_locked()
function we need to perform several steps that were open coded in it and
its callers, so introduce a routine to avoid this duplication:
sk_free_unlock_clone().

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/net-ui6laqkotycunhtmqryl9bfx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodccp: Unlock sock before calling sk_free()
Arnaldo Carvalho de Melo [Wed, 1 Mar 2017 19:35:07 +0000 (16:35 -0300)]
dccp: Unlock sock before calling sk_free()

The code where sk_clone() came from created a new socket and locked it,
but then, on the error path didn't unlock it.

This problem stayed there for a long while, till b0691c8ee7c2 ("net:
Unlock sock before calling sk_free()") fixed it, but unfortunately the
callers of sk_clone() (now sk_clone_locked()) were not audited and the
one in dccp_create_openreq_child() remained.

Now in the age of the syskaller fuzzer, this was finally uncovered, as
reported by Dmitry:

 ---- 8< ----

I've got the following report while running syzkaller fuzzer on
86292b33d4b7 ("Merge branch 'akpm' (patches from Andrew)")

  [ BUG: held lock freed! ]
  4.10.0+ #234 Not tainted
  -------------------------
  syz-executor6/6898 is freeing memory
  ffff88006286cac0-ffff88006286d3b7, with a lock still held there!
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
  5 locks held by syz-executor6/6898:
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock
  include/net/sock.h:1460 [inline]
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>]
  inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681
   #1:  (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>]
  inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink
  include/linux/skbuff.h:1767 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue
  include/linux/skbuff.h:1783 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>]
  process_backlog+0x264/0x730 net/core/dev.c:4835
   #3:  (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>]
  ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504

Fix it just like was done by b0691c8ee7c2 ("net: Unlock sock before calling
sk_free()").

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'batadv-net-for-davem-20170301' of git://git.open-mesh.org/linux-merge
David S. Miller [Thu, 2 Mar 2017 21:16:08 +0000 (13:16 -0800)]
Merge tag 'batadv-net-for-davem-20170301' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are two batman-adv bugfixes:

 - fix a potential double free when fragment merges fail,
   by Sven Eckelmann

 - fix failing tranmission of the 16th (last) fragment if that exists,
   by Linus Lüssing
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoopenvswitch: actions: fixed a brace coding style warning
Peter Downs [Wed, 1 Mar 2017 09:01:17 +0000 (01:01 -0800)]
openvswitch: actions: fixed a brace coding style warning

Fixed a brace coding style warning reported by checkpatch.pl

Signed-off-by: Peter Downs <padowns@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agocxgb4: update latest firmware version supported
Ganesh Goudar [Wed, 1 Mar 2017 05:48:53 +0000 (11:18 +0530)]
cxgb4: update latest firmware version supported

Change t4fw_version.h to update latest firmware version
number to 1.16.33.0.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'amd-xgbe-fixes'
David S. Miller [Thu, 2 Mar 2017 20:57:54 +0000 (12:57 -0800)]
Merge branch 'amd-xgbe-fixes'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver fixes 2017-02-28

This patch series addresses some issues in the AMD XGBE driver.

The following fixes are included in this driver update series:

- Stop the PHY before disabling and releasing device interrupts so that
  MDIO requests issued by the device can be properly handled
- Set the MDIO communication mode on device startup, not just device
  probe
- Do not overwrite SFP settings when mod_absent is detected

This patch series is based on net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Don't overwrite SFP PHY mod_absent settings
Lendacky, Thomas [Tue, 28 Feb 2017 21:03:10 +0000 (15:03 -0600)]
amd-xgbe: Don't overwrite SFP PHY mod_absent settings

If an SFP module is not present, xgbe_phy_sfp_phy_settings() should
return after applying the default settings. Currently there is no return
statement and the default settings are overwritten.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Be sure to set MDIO modes on device (re)start
Lendacky, Thomas [Tue, 28 Feb 2017 21:03:01 +0000 (15:03 -0600)]
amd-xgbe: Be sure to set MDIO modes on device (re)start

The MDIO register mode is set when the device is probed. But when the
device is brought down and then back up, the MDIO register mode has been
reset.  Be sure to reset the mode during device startup and only change
the mode of the address specified.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Stop the PHY before releasing interrupts
Lendacky, Thomas [Tue, 28 Feb 2017 21:02:51 +0000 (15:02 -0600)]
amd-xgbe: Stop the PHY before releasing interrupts

Some configurations require the use of the hardware's MDIO support to
communicate with external PHYs. The MDIO commands indicate completion
through the device interrupt. When bringing down the device the interrupts
were released before stopping the external PHY, resulting in MDIO command
timeouts. Move the stopping of the PHY to before the releasing of the
interrupts.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodrivers: net: xgene: Fix crash on DT systems
Alban Bedel [Tue, 28 Feb 2017 17:08:55 +0000 (18:08 +0100)]
drivers: net: xgene: Fix crash on DT systems

On DT systems the driver require a clock, but the probe just print a
warning and continue, leading to a crash when resetting the device.
To fix this crash and properly handle probe deferals only ignore the
missing clock if DT isn't used or if the clock doesn't exist.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv6: check for ip6_null_entry in __ip6_del_rt_siblings()
WANG Cong [Tue, 28 Feb 2017 00:07:43 +0000 (16:07 -0800)]
ipv6: check for ip6_null_entry in __ip6_del_rt_siblings()

Andrey reported a NULL pointer deref bug in ipv6_route_ioctl()
-> ip6_route_del() -> __ip6_del_rt_siblings() code path. This is
because ip6_null_entry is returned in this path since ip6_null_entry
is kinda default for a ipv6 route table root node. Quote from
David Ahern:

 ip6_null_entry is the root of all ipv6 fib tables making it integrated
 into the table ...

We should ignore any attempt of trying to delete it, like we do in
__ip6_del_rt() path and several others.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Fixes: 0ae8133586ad ("net: ipv6: Allow shorthand delete of all nexthops in multipath route")
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoath10k: search SMBIOS for OEM board file extension
Waldemar Rymarkiewicz [Fri, 24 Feb 2017 22:30:03 +0000 (23:30 +0100)]
ath10k: search SMBIOS for OEM board file extension

Board Data File (BDF) is loaded upon driver boot-up procedure. The right
board data file is identified, among others, by device and sybsystem ids.

The problem, however, can occur when the (default) board data file cannot
fulfill with the vendor requirements and it is necessary to use a different
board data file.

To solve the issue QCA uses SMBIOS type 0xF8 to store Board Data File Name
Extension to specify the extension/variant name. The driver will take the
extension suffix into consideration and will load the right (non-default)
board data file if necessary.

If it is unnecessary to use extension board data file, please leave the
SMBIOS field blank and default configuration will be used.

Example:
If a default board data file for a specific board is identified by a string
      "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028,
       subsystem-device=0310"
then the OEM specific data file, if used, could be identified by variant
suffix:
      "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028,
       subsystem-device=0310,variant=DE_1AB"

If board data file name extension is set but board-2.bin does not contain
board data file for the variant, the driver will fallback to the default
board data file not to break backward compatibility.

This was first applied in commit f2593cb1b291 ("ath10k: Search SMBIOS for OEM
board file extension") but later reverted in commit 005c3490e9db ("Revert
"ath10k: Search SMBIOS for OEM board file extension"". This patch is now
otherwise the same as commit f2593cb1b291 except the regression fixed.

Signed-off-by: Waldemar Rymarkiewicz <ext.waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
7 years agoaverage: change to declare precision, not factor
Johannes Berg [Wed, 15 Feb 2017 08:49:26 +0000 (09:49 +0100)]
average: change to declare precision, not factor

Declaring the factor is counter-intuitive, and people are prone
to using small(-ish) values even when that makes no sense.

Change the DECLARE_EWMA() macro to take the fractional precision,
in bits, rather than a factor, and update all users.

While at it, add some more documentation.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
7 years agoipv6: orphan skbs in reassembly unit
Eric Dumazet [Wed, 1 Mar 2017 22:45:06 +0000 (14:45 -0800)]
ipv6: orphan skbs in reassembly unit

Andrey reported a use-after-free in IPv6 stack.

Issue here is that we free the socket while it still has skb
in TX path and in some queues.

It happens here because IPv6 reassembly unit messes skb->truesize,
breaking skb_set_owner_w() badly.

We fixed a similar issue for IPV4 in commit 8282f27449bf ("inet: frag:
Always orphan skbs inside ip_defrag()")
Acked-by: Joe Stringer <joe@ovn.org>
==================================================================
BUG: KASAN: use-after-free in sock_wfree+0x118/0x120
Read of size 8 at addr ffff880062da0060 by task a.out/4140

page:ffffea00018b6800 count:1 mapcount:0 mapping:          (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 0000000180130013
raw: dead000000000100 dead000000000200 ffff88006741f140 0000000000000000
page dumped because: kasan: bad access detected

CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15
 dump_stack+0x292/0x398 lib/dump_stack.c:51
 describe_address mm/kasan/report.c:262
 kasan_report_error+0x121/0x560 mm/kasan/report.c:370
 kasan_report mm/kasan/report.c:392
 __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413
 sock_flag ./arch/x86/include/asm/bitops.h:324
 sock_wfree+0x118/0x120 net/core/sock.c:1631
 skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655
 skb_release_all+0x15/0x60 net/core/skbuff.c:668
 __kfree_skb+0x15/0x20 net/core/skbuff.c:684
 kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705
 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
 inet_frag_put ./include/net/inet_frag.h:133
 nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617
 ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn ./include/linux/netfilter.h:102
 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
 nf_hook ./include/linux/netfilter.h:212
 __ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160
 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
 rawv6_push_pending_frames net/ipv6/raw.c:613
 rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635
 sock_sendmsg+0xca/0x110 net/socket.c:645
 sock_write_iter+0x326/0x620 net/socket.c:848
 new_sync_write fs/read_write.c:499
 __vfs_write+0x483/0x760 fs/read_write.c:512
 vfs_write+0x187/0x530 fs/read_write.c:560
 SYSC_write fs/read_write.c:607
 SyS_write+0xfb/0x230 fs/read_write.c:599
 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
RIP: 0033:0x7ff26e6f5b79
RSP: 002b:00007ff268e0ed98 EFLAGS: 00000206 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007ff268e0f9c0 RCX: 00007ff26e6f5b79
RDX: 0000000000000010 RSI: 0000000020f50fe1 RDI: 0000000000000003
RBP: 00007ff26ebc1220 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ff268e0f9c0 R14: 00007ff26efec040 R15: 0000000000000003

The buggy address belongs to the object at ffff880062da0000
 which belongs to the cache RAWv6 of size 1504
The buggy address ffff880062da0060 is located 96 bytes inside
 of 1504-byte region [ffff880062da0000ffff880062da05e0)

Freed by task 4113:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
 slab_free_hook mm/slub.c:1352
 slab_free_freelist_hook mm/slub.c:1374
 slab_free mm/slub.c:2951
 kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973
 sk_prot_free net/core/sock.c:1377
 __sk_destruct+0x49c/0x6e0 net/core/sock.c:1452
 sk_destruct+0x47/0x80 net/core/sock.c:1460
 __sk_free+0x57/0x230 net/core/sock.c:1468
 sk_free+0x23/0x30 net/core/sock.c:1479
 sock_put ./include/net/sock.h:1638
 sk_common_release+0x31e/0x4e0 net/core/sock.c:2782
 rawv6_close+0x54/0x80 net/ipv6/raw.c:1214
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431
 sock_release+0x8d/0x1e0 net/socket.c:599
 sock_close+0x16/0x20 net/socket.c:1063
 __fput+0x332/0x7f0 fs/file_table.c:208
 ____fput+0x15/0x20 fs/file_table.c:244
 task_work_run+0x19b/0x270 kernel/task_work.c:116
 exit_task_work ./include/linux/task_work.h:21
 do_exit+0x186b/0x2800 kernel/exit.c:839
 do_group_exit+0x149/0x420 kernel/exit.c:943
 SYSC_exit_group kernel/exit.c:954
 SyS_exit_group+0x1d/0x20 kernel/exit.c:952
 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203

Allocated by task 4115:
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
 slab_post_alloc_hook mm/slab.h:432
 slab_alloc_node mm/slub.c:2708
 slab_alloc mm/slub.c:2716
 kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721
 sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334
 sk_alloc+0x105/0x1010 net/core/sock.c:1396
 inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183
 __sock_create+0x4f6/0x880 net/socket.c:1199
 sock_create net/socket.c:1239
 SYSC_socket net/socket.c:1269
 SyS_socket+0xf9/0x230 net/socket.c:1249
 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203

Memory state around the buggy address:
 ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: net_enable_timestamp() can be called from irq contexts
Eric Dumazet [Wed, 1 Mar 2017 22:28:39 +0000 (14:28 -0800)]
net: net_enable_timestamp() can be called from irq contexts

It is now very clear that silly TCP listeners might play with
enabling/disabling timestamping while new children are added
to their accept queue.

Meaning net_enable_timestamp() can be called from BH context
while current state of the static key is not enabled.

Lets play safe and allow all contexts.

The work queue is scheduled only under the problematic cases,
which are the static key enable/disable transition, to not slow down
critical paths.

This extends and improves what we did in commit 5fa8bbda38c6 ("net: use
a work queue to defer net_disable_timestamp() work")

Fixes: b90e5794c5bd ("net: dont call jump_label_dec from irq context")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: don't call strlen() on the user buffer in packet_bind_spkt()
Alexander Potapenko [Wed, 1 Mar 2017 11:57:20 +0000 (12:57 +0100)]
net: don't call strlen() on the user buffer in packet_bind_spkt()

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in packet_bind_spkt():
Acked-by: Eric Dumazet <edumazet@google.com>
==================================================================
BUG: KMSAN: use of unitialized memory
CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48
 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550
 0000000000000000 0000000000000092 00000000ec400911 0000000000000002
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003
 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0
mm/kmsan/kmsan_instr.c:424
 [<     inline     >] strlen lib/string.c:484
 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144
 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230
net/packet/af_packet.c:3132
 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
chained origin: 00000000eba00911
 [<ffffffff810bb787>] save_stack_trace+0x27/0x50
arch/x86/kernel/stacktrace.c:67
 [<     inline     >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
 [<     inline     >] kmsan_save_stack mm/kmsan/kmsan.c:334
 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0
mm/kmsan/kmsan.c:527
 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130
mm/kmsan/kmsan_instr.c:380
 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=00000000eb400911)
==================================================================
(the line numbers are relative to 4.8-rc6, but the bug persists
upstream)

, when I run the following program as root:

=====================================
 #include <string.h>
 #include <sys/socket.h>
 #include <netpacket/packet.h>
 #include <net/ethernet.h>

 int main() {
   struct sockaddr addr;
   memset(&addr, 0xff, sizeof(addr));
   addr.sa_family = AF_PACKET;
   int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL));
   bind(fd, &addr, sizeof(addr));
   return 0;
 }
=====================================

This happens because addr.sa_data copied from the userspace is not
zero-terminated, and copying it with strlcpy() in packet_bind_spkt()
results in calling strlen() on the kernel copy of that non-terminated
buffer.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: bridge: allow IPv6 when multicast flood is disabled
Mike Manning [Wed, 1 Mar 2017 09:55:28 +0000 (09:55 +0000)]
net: bridge: allow IPv6 when multicast flood is disabled

Even with multicast flooding turned off, IPv6 ND should still work so
that IPv6 connectivity is provided. Allow this by continuing to flood
multicast traffic originated by us.

Fixes: b6cb5ac8331b ("net: bridge: add per-port multicast flood flag")
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Mike Manning <mmanning@brocade.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'mac80211-for-davem-2017-02-28' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Wed, 1 Mar 2017 23:08:34 +0000 (15:08 -0800)]
Merge tag 'mac80211-for-davem-2017-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
First round of fixes - details in the commits:
 * use a valid hrtimer clock ID in mac80211_hwsim
 * don't reorder frames prior to BA session
 * flush a delayed work at suspend so the state is all valid before
   suspend/resume
 * fix packet statistics in fast-RX, the RX packets
   counter increment was simply missing
 * don't try to re-transmit filtered frames in an aggregation session
 * shorten (for tracing) a debug message
 * typo fix in another debug message
 * fix nul-termination with HWSIM_ATTR_RADIO_NAME in hwsim
 * fix mgmt RX processing when station is looked up by driver/device
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp/dccp: block BH for SYN processing
Eric Dumazet [Wed, 1 Mar 2017 16:39:49 +0000 (08:39 -0800)]
tcp/dccp: block BH for SYN processing

SYN processing really was meant to be handled from BH.

When I got rid of BH blocking while processing socket backlog
in commit 5413d1babe8f ("net: do not block BH while processing socket
backlog"), I forgot that a malicious user could transition to TCP_LISTEN
from a state that allowed (SYN) packets to be parked in the socket
backlog while socket is owned by the thread doing the listen() call.

Sure enough syzkaller found this and reported the bug ;)

=================================
[ INFO: inconsistent lock state ]
4.10.0+ #60 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
syz-executor0/5090 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at:
[<ffffffff83a6a370>] spin_lock include/linux/spinlock.h:299 [inline]
 (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at:
[<ffffffff83a6a370>] inet_ehash_insert+0x240/0xad0
net/ipv4/inet_hashtables.c:407
{IN-SOFTIRQ-W} state was registered at:
  mark_irqflags kernel/locking/lockdep.c:2923 [inline]
  __lock_acquire+0xbcf/0x3270 kernel/locking/lockdep.c:3295
  lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:299 [inline]
  inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407
  reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline]
  inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764
  tcp_conn_request+0x25cc/0x3310 net/ipv4/tcp_input.c:6399
  tcp_v4_conn_request+0x157/0x220 net/ipv4/tcp_ipv4.c:1262
  tcp_rcv_state_process+0x802/0x4130 net/ipv4/tcp_input.c:5889
  tcp_v4_do_rcv+0x56b/0x940 net/ipv4/tcp_ipv4.c:1433
  tcp_v4_rcv+0x2e12/0x3210 net/ipv4/tcp_ipv4.c:1711
  ip_local_deliver_finish+0x4ce/0xc40 net/ipv4/ip_input.c:216
  NF_HOOK include/linux/netfilter.h:257 [inline]
  ip_local_deliver+0x1ce/0x710 net/ipv4/ip_input.c:257
  dst_input include/net/dst.h:492 [inline]
  ip_rcv_finish+0xb1d/0x2110 net/ipv4/ip_input.c:396
  NF_HOOK include/linux/netfilter.h:257 [inline]
  ip_rcv+0xd90/0x19c0 net/ipv4/ip_input.c:487
  __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4179
  __netif_receive_skb+0x2a/0x170 net/core/dev.c:4217
  netif_receive_skb_internal+0x1d6/0x430 net/core/dev.c:4245
  napi_skb_finish net/core/dev.c:4602 [inline]
  napi_gro_receive+0x4e6/0x680 net/core/dev.c:4636
  e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4033 [inline]
  e1000_clean_rx_irq+0x5e0/0x1490
drivers/net/ethernet/intel/e1000/e1000_main.c:4489
  e1000_clean+0xb9a/0x2910 drivers/net/ethernet/intel/e1000/e1000_main.c:3834
  napi_poll net/core/dev.c:5171 [inline]
  net_rx_action+0xe70/0x1900 net/core/dev.c:5236
  __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
  invoke_softirq kernel/softirq.c:364 [inline]
  irq_exit+0x19e/0x1d0 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:658 [inline]
  do_IRQ+0x81/0x1a0 arch/x86/kernel/irq.c:250
  ret_from_intr+0x0/0x20
  native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:53
  arch_safe_halt arch/x86/include/asm/paravirt.h:98 [inline]
  default_idle+0x8f/0x410 arch/x86/kernel/process.c:271
  arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:262
  default_idle_call+0x36/0x60 kernel/sched/idle.c:96
  cpuidle_idle_call kernel/sched/idle.c:154 [inline]
  do_idle+0x348/0x440 kernel/sched/idle.c:243
  cpu_startup_entry+0x18/0x20 kernel/sched/idle.c:345
  start_secondary+0x344/0x440 arch/x86/kernel/smpboot.c:272
  verify_cpu+0x0/0xfc
irq event stamp: 1741
hardirqs last  enabled at (1741): [<ffffffff84d49d77>]
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160
[inline]
hardirqs last  enabled at (1741): [<ffffffff84d49d77>]
_raw_spin_unlock_irqrestore+0xf7/0x1a0 kernel/locking/spinlock.c:191
hardirqs last disabled at (1740): [<ffffffff84d4a732>]
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (1740): [<ffffffff84d4a732>]
_raw_spin_lock_irqsave+0xa2/0x110 kernel/locking/spinlock.c:159
softirqs last  enabled at (1738): [<ffffffff84d4deff>]
__do_softirq+0x7cf/0xb7d kernel/softirq.c:310
softirqs last disabled at (1571): [<ffffffff84d4b92c>]
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&hashinfo->ehash_locks[i])->rlock);
  <Interrupt>
    lock(&(&hashinfo->ehash_locks[i])->rlock);

 *** DEADLOCK ***

1 lock held by syz-executor0/5090:
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>] lock_sock
include/net/sock.h:1460 [inline]
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>]
sock_setsockopt+0x233/0x1e40 net/core/sock.c:683

stack backtrace:
CPU: 1 PID: 5090 Comm: syz-executor0 Not tainted 4.10.0+ #60
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x292/0x398 lib/dump_stack.c:51
 print_usage_bug+0x3ef/0x450 kernel/locking/lockdep.c:2387
 valid_state kernel/locking/lockdep.c:2400 [inline]
 mark_lock_irq kernel/locking/lockdep.c:2602 [inline]
 mark_lock+0xf30/0x1410 kernel/locking/lockdep.c:3065
 mark_irqflags kernel/locking/lockdep.c:2941 [inline]
 __lock_acquire+0x6dc/0x3270 kernel/locking/lockdep.c:3295
 lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:299 [inline]
 inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407
 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline]
 inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764
 dccp_v6_conn_request+0xada/0x11b0 net/dccp/ipv6.c:380
 dccp_rcv_state_process+0x51e/0x1660 net/dccp/input.c:606
 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
 sk_backlog_rcv include/net/sock.h:896 [inline]
 __release_sock+0x127/0x3a0 net/core/sock.c:2052
 release_sock+0xa5/0x2b0 net/core/sock.c:2539
 sock_setsockopt+0x60f/0x1e40 net/core/sock.c:1016
 SYSC_setsockopt net/socket.c:1782 [inline]
 SyS_setsockopt+0x2fb/0x3a0 net/socket.c:1765
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:00007fe8b26c2b58 EFLAGS: 00000292 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00000000004458b9
RDX: 000000000000001a RSI: 0000000000000001 RDI: 0000000000000006
RBP: 00000000006e2110 R08: 0000000000000010 R09: 0000000000000000
R10: 00000000208c3000 R11: 0000000000000292 R12: 0000000000708000
R13: 0000000020000000 R14: 0000000000001000 R15: 0000000000000000

Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: update the comment about the length of analysis
Gary Lin [Wed, 1 Mar 2017 08:25:51 +0000 (16:25 +0800)]
bpf: update the comment about the length of analysis

Commit 07016151a446 ("bpf, verifier: further improve search
pruning") increased the limit of processed instructions from
32k to 64k, but the comment still mentioned the 32k limit.
This commit updates the comment to reflect the change.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Gary Lin <glin@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobridge: Fix error path in nbp_vlan_init
Yotam Gigi [Wed, 1 Mar 2017 14:50:45 +0000 (16:50 +0200)]
bridge: Fix error path in nbp_vlan_init

Fix error path order in nbp_vlan_init, so if switchdev_port_attr_set
call failes, the vlan_hash wouldn't be destroyed before inited.

Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support")
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: route: add missing nla_policy entry for RTA_MARK attribute
Liping Zhang [Mon, 27 Feb 2017 12:59:39 +0000 (20:59 +0800)]
net: route: add missing nla_policy entry for RTA_MARK attribute

This will add stricter validating for RTA_MARK attribute.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/ipv6: avoid possible dead locking on addr_gen_mode sysctl
Felix Jia [Sun, 26 Feb 2017 23:41:23 +0000 (12:41 +1300)]
net/ipv6: avoid possible dead locking on addr_gen_mode sysctl

The addr_gen_mode variable can be accessed by both sysctl and netlink.
Repleacd rtnl_lock() with rtnl_trylock() protect the sysctl operation to
avoid the possbile dead lock.`

Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'vxlan-geneve-rcu-fixes'
David S. Miller [Wed, 1 Mar 2017 17:58:46 +0000 (09:58 -0800)]
Merge branch 'vxlan-geneve-rcu-fixes'

Jakub Kicinski says:

====================
VXLAN/geneve RCU fixes

VXLAN and GENEVE need to take RCU lock explicitly because TX path
only has the _bh() flavour of RCU locked.  Making the reconfiguration
path wait for both normal and _bh() RCU would be bigger hassle so
just acquire the lock, as suggested by Pravin:

https://www.mail-archive.com/netdev@vger.kernel.org/msg155583.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agogeneve: lock RCU on TX path
Jakub Kicinski [Fri, 24 Feb 2017 19:43:37 +0000 (11:43 -0800)]
geneve: lock RCU on TX path

There is no guarantees that callers of the TX path will hold
the RCU lock.  Grab it explicitly.

Fixes: fceb9c3e3825 ("geneve: avoid using stale geneve socket.")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agovxlan: lock RCU on TX path
Jakub Kicinski [Fri, 24 Feb 2017 19:43:36 +0000 (11:43 -0800)]
vxlan: lock RCU on TX path

There is no guarantees that callers of the TX path will hold
the RCU lock.  Grab it explicitly.

Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: solve a NAPI race
Eric Dumazet [Tue, 28 Feb 2017 18:34:50 +0000 (10:34 -0800)]
net: solve a NAPI race

While playing with mlx4 hardware timestamping of RX packets, I found
that some packets were received by TCP stack with a ~200 ms delay...

Since the timestamp was provided by the NIC, and my probe was added
in tcp_v4_rcv() while in BH handler, I was confident it was not
a sender issue, or a drop in the network.

This would happen with a very low probability, but hurting RPC
workloads.

A NAPI driver normally arms the IRQ after the napi_complete_done(),
after NAPI_STATE_SCHED is cleared, so that the hard irq handler can grab
it.

Problem is that if another point in the stack grabs NAPI_STATE_SCHED bit
while IRQ are not disabled, we might have later an IRQ firing and
finding this bit set, right before napi_complete_done() clears it.

This can happen with busy polling users, or if gro_flush_timeout is
used. But some other uses of napi_schedule() in drivers can cause this
as well.

thread 1                                 thread 2 (could be on same cpu, or not)

// busy polling or napi_watchdog()
napi_schedule();
...
napi->poll()

device polling:
read 2 packets from ring buffer
                                          Additional 3rd packet is
available.
                                          device hard irq

                                          // does nothing because
NAPI_STATE_SCHED bit is owned by thread 1
                                          napi_schedule();

napi_complete_done(napi, 2);
rearm_irq();

Note that rearm_irq() will not force the device to send an additional
IRQ for the packet it already signaled (3rd packet in my example)

This patch adds a new NAPI_STATE_MISSED bit, that napi_schedule_prep()
can set if it could not grab NAPI_STATE_SCHED

Then napi_complete_done() properly reschedules the napi to make sure
we do not miss something.

Since we manipulate multiple bits at once, use cmpxchg() like in
sk_busy_loop() to provide proper transactions.

In v2, I changed napi_watchdog() to use a relaxed variant of
napi_schedule_prep() : No need to set NAPI_STATE_MISSED from this point.

In v3, I added more details in the changelog and clears
NAPI_STATE_MISSED in busy_poll_stop()

In v4, I added the ideas given by Alexander Duyck in v3 review

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4: && vs & typo
Dan Carpenter [Tue, 28 Feb 2017 12:02:15 +0000 (15:02 +0300)]
net/mlx4: && vs & typo

Bitwise & was obviously intended here.

Fixes: 745d8ae4622c ("net/mlx4: Spoofcheck and zero MAC can't coexist")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: usb: asix_devices: fix missing return code check on call to asix_write_medium_mode
Colin Ian King [Tue, 28 Feb 2017 11:58:22 +0000 (11:58 +0000)]
net: usb: asix_devices: fix missing return code check on call to asix_write_medium_mode

The call to asix_write_medium_mode is not updating the return code ret
and yet ret is being checked for an error. Fix this by assigning ret to
the return code from the call asix_write_medium_mode.

Detected by CoverityScan, CID#1357148 ("Logically Dead Code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMAINTAINERS: Orphan usb/net/hso driver
Baruch Siach [Tue, 28 Feb 2017 08:39:48 +0000 (10:39 +0200)]
MAINTAINERS: Orphan usb/net/hso driver

The email address of Jan Dumon bounces, and there is not relevant information
in the linked website.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agomlxsw: spectrum_router: Avoid potential packets loss
Ido Schimmel [Tue, 28 Feb 2017 07:55:40 +0000 (08:55 +0100)]
mlxsw: spectrum_router: Avoid potential packets loss

When the structure of the LPM tree changes (f.e., due to the addition of
a new prefix), we unbind the old tree and then bind the new one. This
may result in temporary packet loss.

Instead, overwrite the old binding with the new one.

Fixes: 6b75c4807db3 ("mlxsw: spectrum_router: Add virtual router management")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agords: ib: add the static type to the variables
Zhu Yanjun [Tue, 28 Feb 2017 06:45:40 +0000 (01:45 -0500)]
rds: ib: add the static type to the variables

The variables rds_ib_mr_1m_pool_size and rds_ib_mr_8k_pool_size
are used only in the ib.c file. As such, the static type is
added to limit them in this file.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: call rcu_read_lock before checking for duplicate transport nodes
Xin Long [Tue, 28 Feb 2017 04:41:29 +0000 (12:41 +0800)]
sctp: call rcu_read_lock before checking for duplicate transport nodes

Commit cd2b70875058 ("sctp: check duplicate node before inserting a
new transport") called rhltable_lookup() to check for the duplicate
transport node in transport rhashtable.

But rhltable_lookup() doesn't call rcu_read_lock inside, it could cause
a use-after-free issue if it tries to dereference the node that another
cpu has freed it. Note that sock lock can not avoid this as it is per
sock.

This patch is to fix it by calling rcu_read_lock before checking for
duplicate transport nodes.

Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agorxrpc: Fix deadlock between call creation and sendmsg/recvmsg
David Howells [Mon, 27 Feb 2017 15:43:06 +0000 (15:43 +0000)]
rxrpc: Fix deadlock between call creation and sendmsg/recvmsg

All the routines by which rxrpc is accessed from the outside are serialised
by means of the socket lock (sendmsg, recvmsg, bind,
rxrpc_kernel_begin_call(), ...) and this presents a problem:

 (1) If a number of calls on the same socket are in the process of
     connection to the same peer, a maximum of four concurrent live calls
     are permitted before further calls need to wait for a slot.

 (2) If a call is waiting for a slot, it is deep inside sendmsg() or
     rxrpc_kernel_begin_call() and the entry function is holding the socket
     lock.

 (3) sendmsg() and recvmsg() or the in-kernel equivalents are prevented
     from servicing the other calls as they need to take the socket lock to
     do so.

 (4) The socket is stuck until a call is aborted and makes its slot
     available to the waiter.

Fix this by:

 (1) Provide each call with a mutex ('user_mutex') that arbitrates access
     by the users of rxrpc separately for each specific call.

 (2) Make rxrpc_sendmsg() and rxrpc_recvmsg() unlock the socket as soon as
     they've got a call and taken its mutex.

     Note that I'm returning EWOULDBLOCK from recvmsg() if MSG_DONTWAIT is
     set but someone else has the lock.  Should I instead only return
     EWOULDBLOCK if there's nothing currently to be done on a socket, and
     sleep in this particular instance because there is something to be
     done, but we appear to be blocked by the interrupt handler doing its
     ping?

 (3) Make rxrpc_new_client_call() unlock the socket after allocating a new
     call, locking its user mutex and adding it to the socket's call tree.
     The call is returned locked so that sendmsg() can add data to it
     immediately.

     From the moment the call is in the socket tree, it is subject to
     access by sendmsg() and recvmsg() - even if it isn't connected yet.

 (4) Lock new service calls in the UDP data_ready handler (in
     rxrpc_new_incoming_call()) because they may already be in the socket's
     tree and the data_ready handler makes them live immediately if a user
     ID has already been preassigned.

     Note that the new call is locked before any notifications are sent
     that it is live, so doing mutex_trylock() *ought* to always succeed.
     Userspace is prevented from doing sendmsg() on calls that are in a
     too-early state in rxrpc_do_sendmsg().

 (5) Make rxrpc_new_incoming_call() return the call with the user mutex
     held so that a ping can be scheduled immediately under it.

     Note that it might be worth moving the ping call into
     rxrpc_new_incoming_call() and then we can drop the mutex there.

 (6) Make rxrpc_accept_call() take the lock on the call it is accepting and
     release the socket after adding the call to the socket's tree.  This
     is slightly tricky as we've dequeued the call by that point and have
     to requeue it.

     Note that requeuing emits a trace event.

 (7) Make rxrpc_kernel_send_data() and rxrpc_kernel_recv_data() take the
     new mutex immediately and don't bother with the socket mutex at all.

This patch has the nice bonus that calls on the same socket are now to some
extent parallelisable.

Note that we might want to move rxrpc_service_prealloc() calls out from the
socket lock and give it its own lock, so that we don't hang progress in
other calls because we're waiting for the allocator.

We probably also want to avoid calling rxrpc_notify_socket() from within
the socket lock (rxrpc_accept_call()).

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.c.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi
Linus Torvalds [Wed, 1 Mar 2017 05:06:30 +0000 (21:06 -0800)]
Merge tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "This is a few small fixes to the main IPMI driver, make some things
  const, fix typos, etc.

  The last patch came in about a week ago, but IMHO it's best to go in
  now. It is not for the main driver, it's for the bt-bmc driver, which
  runs on the managment controller side, not on the host side, so the
  scope is limited and the change is necessary"

* tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: bt-bmc: Use a regmap for register access
  char: ipmi: constify ipmi_smi_handlers structures
  acpi:ipmi: Make IPMI user handler const
  ipmi: make ipmi_usr_hndl const
  Documentation: Fix a typo in IPMI.txt.

7 years agoMerge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax
Linus Torvalds [Wed, 1 Mar 2017 04:29:41 +0000 (20:29 -0800)]
Merge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax

Pull IDR rewrite from Matthew Wilcox:
 "The most significant part of the following is the patch to rewrite the
  IDR & IDA to be clients of the radix tree. But there's much more,
  including an enhancement of the IDA to be significantly more space
  efficient, an IDR & IDA test suite, some improvements to the IDR API
  (and driver changes to take advantage of those improvements), several
  improvements to the radix tree test suite and RCU annotations.

  The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
  for most of the last cycle. Coupled with the IDR test suite, I feel
  pretty confident that any remaining bugs are quite hard to hit. 0-day
  did a great job of watching my git tree and pointing out problems; as
  it hit them, I added new test-cases to be sure not to be caught the
  same way twice"

Willy goes on to expand a bit on the IDR rewrite rationale:
 "The radix tree and the IDR use very similar data structures.

  Merging the two codebases lets us share the memory allocation pools,
  and results in a net deletion of 500 lines of code. It also opens up
  the possibility of exposing more of the features of the radix tree to
  users of the IDR (and I have some interesting patches along those
  lines waiting for 4.12)

  It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
  will shrink a fair few data structures that embed an IDR"

* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
  radix tree test suite: Add config option for map shift
  idr: Add missing __rcu annotations
  radix-tree: Fix __rcu annotations
  radix-tree: Add rcu_dereference and rcu_assign_pointer calls
  radix tree test suite: Run iteration tests for longer
  radix tree test suite: Fix split/join memory leaks
  radix tree test suite: Fix leaks in regression2.c
  radix tree test suite: Fix leaky tests
  radix tree test suite: Enable address sanitizer
  radix_tree_iter_resume: Fix out of bounds error
  radix-tree: Store a pointer to the root in each node
  radix-tree: Chain preallocated nodes through ->parent
  radix tree test suite: Dial down verbosity with -v
  radix tree test suite: Introduce kmalloc_verbose
  idr: Return the deleted entry from idr_remove
  radix tree test suite: Build separate binaries for some tests
  ida: Use exceptional entries for small IDAs
  ida: Move ida_bitmap to a percpu variable
  Reimplement IDR and IDA using the radix tree
  radix-tree: Add radix_tree_iter_delete
  ...

7 years agoMerge tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 1 Mar 2017 04:18:44 +0000 (20:18 -0800)]
Merge tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:
 "Fix an issue introduced this merge window into the AMD and Intel IOMMU
  drivers that causes an oops when the vendor-specific sysfs-entries are
  accessed.

  The reason for this issue is that I forgot to update the sysfs code in
  the drivers when moving the iommu 'struct device' to the iommu-core"

* tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
  iommu/vt-d: Fix crash when accessing VT-d sysfs entries

7 years agoMerge tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 28 Feb 2017 23:39:09 +0000 (15:39 -0800)]
Merge tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "The nfsd update this round is mainly a lot of miscellaneous cleanups
  and bugfixes.

  A couple changes could theoretically break working setups on upgrade.
  I don't expect complaints in practice, but they seem worth calling out
  just in case:

   - NFS security labels are now off by default; a new security_label
     export flag reenables it per export. But, having them on by default
     is a disaster, as it generally only makes sense if all your clients
     and servers have similar enough selinux policies. Thanks to Jason
     Tibbitts for pointing this out.

   - NFSv4/UDP support is off. It was never really supported, and the
     spec explicitly forbids it. We only ever left it on out of
     laziness; thanks to Jeff Layton for finally fixing that"

* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Fix display of the version string
  nfsd: fix configuration of supported minor versions
  sunrpc: don't register UDP port with rpcbind when version needs congestion control
  nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
  sunrpc: flag transports as having congestion control
  sunrpc: turn bitfield flags in svc_version into bools
  nfsd: remove superfluous KERN_INFO
  nfsd: special case truncates some more
  nfsd: minor nfsd_setattr cleanup
  NFSD: Reserve adequate space for LOCKT operation
  NFSD: Get response size before operation for all RPCs
  nfsd/callback: Drop a useless data copy when comparing sessionid
  nfsd/callback: skip the callback tag
  nfsd/callback: Cleanup callback cred on shutdown
  nfsd/idmap: return nfserr_inval for 0-length names
  SUNRPC/Cache: Always treat the invalid cache as unexpired
  SUNRPC: Drop all entries from cache_detail when cache_purge()
  svcrdma: Poll CQs in "workqueue" mode
  svcrdma: Combine list fields in struct svc_rdma_op_ctxt
  svcrdma: Remove unused sc_dto_q field
  ...

7 years agoMerge tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client
Linus Torvalds [Tue, 28 Feb 2017 23:36:09 +0000 (15:36 -0800)]
Merge tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "This time around we have:

   - support for rbd data-pool feature, which enables rbd images on
     erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to
     allow erasure-coded profiles with k+m up to 32.

   - a patch for ceph_d_revalidate() performance regression introduced
     in 4.9, along with some cleanups in the area (Jeff Layton)

   - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff
     Layton)

   - buffered reads are now processed in rsize windows instead of rasize
     windows (Andreas Gerstmayr). The new default for rsize mount option
     is 64M.

   - ack vs commit distinction is gone, greatly simplifying ->fsync()
     and MOSDOpReply handling code (myself)

  ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH
  computations are still serialized though) and several minor fixes and
  cleanups all over"

* tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits)
  libceph, rbd, ceph: WRITE | ONDISK -> WRITE
  libceph: get rid of ack vs commit
  ceph: remove special ack vs commit behavior
  ceph: tidy some white space in get_nonsnap_parent()
  crush: fix dprintk compilation
  crush: do is_out test only if we do not collide
  ceph: remove req from unsafe list when unregistering it
  rbd: constify device_type structure
  rbd: kill obj_request->object_name and rbd_segment_name_cache
  rbd: store and use obj_request->object_no
  rbd: RBD_V{1,2}_DATA_FORMAT macros
  rbd: factor out __rbd_osd_req_create()
  rbd: set offset and length outside of rbd_obj_request_create()
  rbd: support for data-pool feature
  rbd: introduce rbd_init_layout()
  rbd: use rbd_obj_bytes() more
  rbd: remove now unused rbd_obj_request_wait() and helpers
  rbd: switch rbd_obj_method_sync() to ceph_osdc_call()
  libceph: pass reply buffer length through ceph_osdc_call()
  rbd: do away with obj_request in rbd_obj_read_sync()
  ...

7 years agoMerge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Tue, 28 Feb 2017 19:50:53 +0000 (11:50 -0800)]
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Feb 2017 19:46:00 +0000 (11:46 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Two documentation updates, plus a debugging annotation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Update the stale comment in reserve_crashkernel()
  x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
  Documentation, x86, resctrl: Recommend locking for resctrlfs

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Feb 2017 19:44:01 +0000 (11:44 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "Two rq-clock warnings related fixes, plus a cgroups related crash fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cgroup: Move sched_online_group() back into css_online() to fix crash
  sched/fair: Update rq clock before changing a task's CPU affinity
  sched/core: Fix update_rq_clock() splat on hotplug (and suspend/resume)

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Feb 2017 19:38:18 +0000 (11:38 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Misc fixes on the kernel and tooling side - nothing in particular
  stands out"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Fix the perf_cpu_time_max_percent check
  perf/core: Fix perf_event_enable_on_exec() timekeeping (again)
  perf/core: Remove confusing comment and move put_ctx()
  perf record: Honor --quiet option properly
  perf annotate: Add -q/--quiet option
  perf diff: Add -q/--quiet option
  perf report: Add -q/--quiet option
  perf utils: Check verbose flag properly
  perf utils: Add perf_quiet_option()
  perf record: Add -a as default target
  perf stat: Add -a as default target
  perf tools: Fail on using multiple bits long terms without value
  perf tools: Move new_term arguments into struct parse_events_term template
  perf build: Add special fixdep cleaning rule
  perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in cpu_topology_map
  perf header: Make build_cpu_topology skip offline/absent CPUs
  perf cpumap: Add cpu__max_present_cpu()
  perf session: Fix DEBUG=1 build with clang
  tools lib traceevent: It's preempt not prempt
  perf python: Filter out -specs=/a/b/c from the python binding cc options
  ...

7 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Feb 2017 18:44:16 +0000 (10:44 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:
 "The main change is the uninlining of large refcount_t APIs, plus a
  header dependency fix.

  Note that the uninlining allowed us to enable the underflow/overflow
  warnings unconditionally and remove the debug Kconfig switch: this
  might trigger new warnings in buggy code and turn
  crashes/use-after-free bugs into less harmful memory leaks"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Add missing kernel.h header to have UINT_MAX defined
  locking/refcounts: Out-of-line everything

7 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Feb 2017 18:15:59 +0000 (10:15 -0800)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes related to unreachable code, plus a build
  fix for out of tree modules"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Enclose contents of unreachable() macro in a block
  objtool: Prevent GCC from merging annotate_unreachable()
  objtool: Improve detection of BUG() and other dead ends
  objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide
Linus Torvalds [Tue, 28 Feb 2017 18:13:40 +0000 (10:13 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide

Pull IDE updates from David Miller:
 "Just one actual change here this time around, adding some init data
  annotations. The other change was bogus and got reverted"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: palm_bk3710: add __initdata to palm_bk3710_port_info
  Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"
  ide: Fix interface autodetection in legacy IDE driver (trial #2)

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Tue, 28 Feb 2017 18:00:39 +0000 (10:00 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Don't save TIPC header values before the header has been validated,
    from Jon Paul Maloy.

 2) Fix memory leak in RDS, from Zhu Yanjun.

 3) We miss to initialize the UID in the flow key in some paths, from
    Julian Anastasov.

 4) Fix latent TOS masking bug in the routing cache removal from years
    ago, also from Julian.

 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
    fix from Xin Long.

 6) Missing module ref count drop in packet scheduler actions, from
    Roman Mashak.

 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.

 8) Fix use after free which happens because L2TP's ipv4 support returns
    non-zero values from it's backlog_rcv function which ipv4 interprets
    as protocol values. Fix from Paul Hüber.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  qed: Don't use attention PTT for configuring BW
  qed: Fix race with multiple VFs
  l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
  xfrm: provide correct dst in xfrm_neigh_lookup
  rhashtable: Fix RCU dereference annotation in rht_bucket_nested
  rhashtable: Fix use before NULL check in bucket_table_free
  net sched actions: do not overwrite status of action creation.
  rxrpc: Kernel calls get stuck in recvmsg
  net sched actions: decrement module reference count after table flush.
  lib: Allow compile-testing of parman
  ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
  sctp: set sin_port for addr param when checking duplicate address
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
  netfilter: nft_set_bitmap: incorrect bitmap size
  net: s2io: fix typo argumnet argument
  net: vxge: fix typo argumnet argument
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
  ipv4: mask tos for input route
  ipv4: add missing initialization for flowi4_uid
  lib: fix spelling mistake: "actualy" -> "actually"
  ...

7 years agoiommu/amd: Fix crash when accessing AMD-Vi sysfs entries
Joerg Roedel [Tue, 28 Feb 2017 12:57:18 +0000 (13:57 +0100)]
iommu/amd: Fix crash when accessing AMD-Vi sysfs entries

The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555c241 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoiommu/vt-d: Fix crash when accessing VT-d sysfs entries
Joerg Roedel [Tue, 28 Feb 2017 12:57:18 +0000 (13:57 +0100)]
iommu/vt-d: Fix crash when accessing VT-d sysfs entries

The link between the iommu sysfs-device and the struct
intel_iommu is no longer stored as driver-data. Update the
code to use the new access method.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555c241 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoMerge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to indicate...
Russell King [Tue, 28 Feb 2017 11:08:11 +0000 (11:08 +0000)]
Merge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to indicate}' into for-linus

7 years agoARM: mm: round the initrd reservation to page boundaries
Russell King [Mon, 16 Jan 2017 15:21:05 +0000 (15:21 +0000)]
ARM: mm: round the initrd reservation to page boundaries

Round the initrd memblock reservation to page boundaries to prevent
other data sharing the initrd pages.  This prevents an allocation
possibly overlapping with the initrd, which would later get trampled
on in free_initrd_mem().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: mm: clean up initrd initialisation
Russell King [Mon, 16 Jan 2017 15:13:25 +0000 (15:13 +0000)]
ARM: mm: clean up initrd initialisation

Rather than repeatedly testing phys_initrd_size to see if the initrd
is still enabled, return from the new function to avoid executing the
remaining initialisation.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: mm: move initrd init code out of arm_memblock_init()
Russell King [Mon, 16 Jan 2017 15:11:10 +0000 (15:11 +0000)]
ARM: mm: move initrd init code out of arm_memblock_init()

Move the ARM initrd initialisation code out of arm_memblock_init() into
its own function, so it can be cleaned up.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8655/1: improve NOMMU definition of pgprot_*()
Arnd Bergmann [Thu, 2 Feb 2017 12:30:40 +0000 (13:30 +0100)]
ARM: 8655/1: improve NOMMU definition of pgprot_*()

The tegra DRM driver produces a harmless warning when built for NOMMU:

drivers/gpu/drm/tegra/gem.c: In function 'tegra_drm_mmap':
drivers/gpu/drm/tegra/gem.c:508:12: unused variable 'prot'

This is because pgprot_writecombine() on ARM returns a constant and
ignores its argument. The version in asm-generic doesn't have that
problem, so let's use that one instead. We don't actually care
about the value on NOMMU, and this is consistent with what some
other architectures do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8654/1: decompressor: add strlen prototype
Arnd Bergmann [Thu, 2 Feb 2017 12:29:36 +0000 (13:29 +0100)]
ARM: 8654/1: decompressor: add strlen prototype

The decompress.c file contains a declaration for strstr() so we can
include some compression library code.

With the updated LZ4 implementation, we run into the same problem again
for strlen():

In file included from ../include/linux/rcupdate.h:40:0,
                 from ../include/linux/srcu.h:33,
                 from ../include/linux/notifier.h:15,
                 from ../include/linux/memory_hotplug.h:6,
                 from ../include/linux/mmzone.h:749,
                 from ../include/linux/gfp.h:5,
                 from ../include/linux/kmod.h:22,
                 from ../include/linux/module.h:13,
                 from ../arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
                 from ../arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:13,
                 from ../arch/arm/boot/compressed/decompress.c:55:
include/linux/cpumask.h: In function 'cpumask_parse':
include/linux/cpumask.h:592:53: error: implicit declaration of function 'strlen';did you mean 'strstr'? [-Werror=implicit-function-declaration]

This adds another declaration to work around the new problem.

Fixes: ce83d9ab80d6 ("lib: update LZ4 compressor module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8652/1: cache-uniphier: clean up active way setup code
Masahiro Yamada [Wed, 1 Feb 2017 13:30:09 +0000 (14:30 +0100)]
ARM: 8652/1: cache-uniphier: clean up active way setup code

Now, the active way setup function is called with a fixed value zero
for the second argument.  The code can be simpler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
Masahiro Yamada [Wed, 1 Feb 2017 13:29:22 +0000 (14:29 +0100)]
ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>

Nothing in this header file depends on <linux/types.h>.
Rather, <linux/errno.h> should be included for -ENODEV.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
Ard Biesheuvel [Mon, 30 Jan 2017 17:29:28 +0000 (18:29 +0100)]
ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly

According to the spec 'ELF for the ARM Architecture' (IHI 0044E),
addends for R_ARM_PREL31 relocations are 31-bit signed quantities,
so we need to sign extend the value to 32 bits before it can be used
as an offset in the calculation of the relocated value.

We have not been bitten by this because these relocations are usually
emitted against the start of a section, which means the addends never
assume negative values in practice. But it is a bug nonetheless, so fix
it.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8649/2: nommu: remove Hivecs configuration is asm
Afzal Mohammed [Wed, 1 Feb 2017 12:47:34 +0000 (13:47 +0100)]
ARM: 8649/2: nommu: remove Hivecs configuration is asm

Now that exception based address is handled dynamically for
processors with CP15, remove Hivecs configuration in assembly.

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8648/2: nommu: display vectors base
Afzal Mohammed [Wed, 1 Feb 2017 12:39:18 +0000 (13:39 +0100)]
ARM: 8648/2: nommu: display vectors base

VECTORS_BASE displays the exception base address. Now on no-MMU as
the exception base address is dynamically estimated, define
VECTORS_BASE to the variable holding it.

As it is the case, limit VECTORS_BASE constant definition to MMU.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8647/2: nommu: dynamic exception base address setting
Afzal Mohammed [Wed, 1 Feb 2017 12:46:36 +0000 (13:46 +0100)]
ARM: 8647/2: nommu: dynamic exception base address setting

No-MMU dynamic exception base address configuration on CP15
processors. In the case of low vectors, decision based on whether
security extensions are enabled & whether remap vectors to RAM
CONFIG option is selected.

For no-MMU without CP15, current default value of 0x0 is retained.

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
Afzal Mohammed [Sun, 29 Jan 2017 16:31:32 +0000 (17:31 +0100)]
ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig

For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro
definition will suffice.

For no-MMU, exception base address is dynamically determined in
subsequent patches. To preserve bisectability, now make the
macro applicable for no-MMU scenario too.

Thanks to 0-DAY kernel test infrastructure that found the
bisectability issue. This macro will be restricted to MMU case upon
dynamically determining exception base address for no-MMU.

Once exception address is handled dynamically for no-MMU,
VECTORS_BASE can be removed from Kconfig.

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8644/1: Reduce "CPU: shutdown" message to debug level
Florian Fainelli [Thu, 19 Jan 2017 00:26:28 +0000 (01:26 +0100)]
ARM: 8644/1: Reduce "CPU: shutdown" message to debug level

Similar to c68b0274fb3c ("ARM: reduce "Booted secondary processor"
message to debug level"), demote the "CPU: shutdown" pr_notice() into a
pr_debug().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
Florian Fainelli [Sun, 15 Jan 2017 02:59:29 +0000 (03:59 +0100)]
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol

All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
Florian Fainelli [Sun, 15 Jan 2017 02:59:00 +0000 (03:59 +0100)]
ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL

x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys calls. The goal is to catch users who are calling
virt_to_phys on non-linear addresses immediately. This includes caller
using __virt_to_phys() on image addresses instead of __pa_symbol(). This
is a generally useful debug feature to spot bad code (particulary in
drivers).

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoMerge branch 'devel-stable' into misc
Russell King [Tue, 28 Feb 2017 11:05:54 +0000 (11:05 +0000)]
Merge branch 'devel-stable' into misc

7 years agoARM: 8639/1: Define KERNEL_START and KERNEL_END
Florian Fainelli [Sun, 15 Jan 2017 02:57:40 +0000 (03:57 +0100)]
ARM: 8639/1: Define KERNEL_START and KERNEL_END

In preparation for adding CONFIG_DEBUG_VIRTUAL support, define a set of
common constants: KERNEL_START and KERNEL_END which abstract
CONFIG_XIP_KERNEL vs. !CONFIG_XIP_KERNEL. Update the code where
relevant.

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
Florian Fainelli [Sun, 15 Jan 2017 02:57:03 +0000 (03:57 +0100)]
ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_

In preparation for defining KERNEL_START on ARM, rename KERNEL_START to
PART_KERNEL_START, and to be consistent, do this for all
partition-related constants.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8637/1: Adjust memory boundaries after reservations
Laura Abbott [Fri, 13 Jan 2017 21:51:45 +0000 (22:51 +0100)]
ARM: 8637/1: Adjust memory boundaries after reservations

adjust_lowmem_bounds is responsible for setting up the boundary for
lowmem/highmem. This needs to be setup before memblock reservations can
occur. At the time memblock reservations can occur, memory can also be
removed from the system. The lowmem/highmem boundary and end of memory
may be affected by this but it is currently not recalculated. On some
systems this may be harmless, on others this may result in incorrect
ranges being passed to the main memory allocator. Correct this by
recalculating the lowmem/highmem boundary after all reservations have
been made.

Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoARM: 8636/1: Cleanup sanity_check_meminfo
Laura Abbott [Fri, 13 Jan 2017 21:51:08 +0000 (22:51 +0100)]
ARM: 8636/1: Cleanup sanity_check_meminfo

The logic for sanity_check_meminfo has become difficult to
follow. Clean up the code so it's more obvious what the code
is actually trying to do. Additionally, meminfo is now removed
so rename the function to better describe its purpose.

Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
7 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Tue, 28 Feb 2017 07:09:29 +0000 (23:09 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

 - a few MM remainders

 - misc things

 - autofs updates

 - signals

 - affs updates

 - ipc

 - nilfs2

 - spelling.txt updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
  mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()
  mm: add arch-independent testcases for RODATA
  hfs: atomically read inode size
  mm: clarify mm_struct.mm_{users,count} documentation
  mm: use mmget_not_zero() helper
  mm: add new mmget() helper
  mm: add new mmgrab() helper
  checkpatch: warn when formats use %Z and suggest %z
  lib/vsprintf.c: remove %Z support
  scripts/spelling.txt: add some typo-words
  scripts/spelling.txt: add "followings" pattern and fix typo instances
  scripts/spelling.txt: add "therfore" pattern and fix typo instances
  scripts/spelling.txt: add "overwriten" pattern and fix typo instances
  scripts/spelling.txt: add "overwritting" pattern and fix typo instances
  scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances
  scripts/spelling.txt: add "disassocation" pattern and fix typo instances
  scripts/spelling.txt: add "omited" pattern and fix typo instances
  scripts/spelling.txt: add "explictely" pattern and fix typo instances
  scripts/spelling.txt: add "applys" pattern and fix typo instances
  scripts/spelling.txt: add "configuartion" pattern and fix typo instances
  ...

7 years agoMerge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Tue, 28 Feb 2017 07:07:59 +0000 (23:07 -0800)]
Merge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest updates from Steven Rostedt:
 "These are various fixes that I have made and never got around to
  pushing. I've been asked to get the upstream repo back up-to-date"

* tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add variable run_command_status to save status of commands executed
  ktest.pl: Powercycle the box on reboot if no connection can be made
  ktest: Add timeout to ssh command
  ktest: Fix child exit code processing
  ktest: Have POST_TEST run after the test has totally completed

7 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Tue, 28 Feb 2017 07:05:42 +0000 (23:05 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68nommu update from Greg Ungerer:
 "Only a single change, to update the amcore board defconfig"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k/defconfig: amcore board defconfig tuning

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Tue, 28 Feb 2017 07:03:04 +0000 (23:03 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Martin Schwidefsky:
 "Next to the usual bug fixes (including the TASK_SIZE fix), there is
  one larger crypto item. It allows to use protected keys with the
  in-kernel crypto API

  The protected key support has two parts, the pkey user space API to
  convert key formats and the paes crypto module that uses a protected
  key instead of a standard AES key"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: TASK_SIZE for kernel threads
  s390/crypt: Add protected key AES module
  s390/dasd: fix spelling mistake: "supportet" -> "supported"
  s390/pkey: Introduce pkey kernel module
  s390/zcrypt: export additional symbols
  s390/zcrypt: Rework CONFIG_ZCRYPT Kconfig text.
  s390/zcrypt: Cleanup leftover module code.
  s390/nmi: purge tlbs after control register validation
  s390/nmi: fix order of register validation
  s390/crypto: Add PCKMO inline function
  s390/zcrypt: Enable request count reset for cards and queues.
  s390/mm: use _SEGMENT_ENTRY_EMPTY in the code
  s390/chsc: Add exception handler for CHSC instruction
  s390: opt into HAVE_COPY_THREAD_TLS
  s390: restore address space when returning to user space
  s390: rename CIF_ASCE to CIF_ASCE_PRIMARY

7 years agoobjtool: Enclose contents of unreachable() macro in a block
Josh Poimboeuf [Tue, 28 Feb 2017 04:21:16 +0000 (22:21 -0600)]
objtool: Enclose contents of unreachable() macro in a block

Guenter Roeck reported a boot failure in mips64.  It was bisected to the
following commit:

  d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")

The unreachable() macro was formerly only composed of a single
statement.  The above commit added a second statement, but neglected to
enclose the statements in a block.

Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170228042116.glmwmwiohcix7o4a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agomac80211: use driver-indicated transmitter STA only for data frames
Johannes Berg [Mon, 27 Feb 2017 08:38:11 +0000 (09:38 +0100)]
mac80211: use driver-indicated transmitter STA only for data frames

When I originally introduced using the driver-indicated station as an
optimisation to avoid the hashtable lookup/iteration, of course it
wasn't intended to really functionally change anything.

I neglected, however, to take into account VLAN interfaces, which have
the property that management and data frames are handled differently:
data frames go directly to the station and the VLAN while management
frames continue to be processed over the underlying/associated AP-type
interface. As a consequence, when a driver used this optimisation for
management frames and the user enabled VLANs, my change broke things
since any management frames, particularly disassoc/deauth, were missed
by hostapd.

Fix this by restoring the original code path for non-data frames, they
aren't critical for performance to begin with.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194713.

Big thanks goes to Jarek who bisected the issue and provided a very
detailed bug report, including the crucial information that he was
using VLANs in his configuration.

Cc: stable@vger.kernel.org
Fixes: 771e846bea9e ("mac80211: allow passing transmitter station on RX")
Reported-and-tested-by: Jarek Kamiński <jarek@freeside.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
7 years agoMerge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Tue, 28 Feb 2017 06:12:20 +0000 (22:12 -0800)]
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

Pull workqueue update from Tejun Heo:
 "Just one patch to silence clang's warnings"

* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: avoid clang warning

7 years agoMerge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Linus Torvalds [Tue, 28 Feb 2017 05:41:08 +0000 (21:41 -0800)]
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:
 "Several noteworthy changes.

   - Parav's rdma controller is finally merged. It is very straight
     forward and can limit the abosolute numbers of common rdma
     constructs used by different cgroups.

   - kernel/cgroup.c got too chubby and disorganized. Created
     kernel/cgroup/ subdirectory and moved all cgroup related files
     under kernel/ there and reorganized the core code. This hurts for
     backporting patches but was long overdue.

   - cgroup v2 process listing reimplemented so that it no longer
     depends on allocating a buffer large enough to cache the entire
     result to sort and uniq the output. v2 has always mangled the sort
     order to ensure that users don't depend on the sorted output, so
     this shouldn't surprise anybody. This makes the pid listing
     functions use the same iterators that are used internally, which
     have to have the same iterating capabilities anyway.

   - perf cgroup filtering now works automatically on cgroup v2. This
     patch was posted a long time ago but somehow fell through the
     cracks.

   - misc fixes asnd documentation updates"

* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
  kernfs: fix locking around kernfs_ops->release() callback
  cgroup: drop the matching uid requirement on migration for cgroup v2
  cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
  cgroup: misc cleanups
  cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
  cgroup: track migration context in cgroup_mgctx
  cgroup: cosmetic update to cgroup_taskset_add()
  rdmacg: Fixed uninitialized current resource usage
  cgroup: Add missing cgroup-v2 PID controller documentation.
  rdmacg: Added documentation for rdmacg
  IB/core: added support to use rdma cgroup controller
  rdmacg: Added rdma cgroup controller
  cgroup: fix a comment typo
  cgroup: fix RCU related sparse warnings
  cgroup: move namespace code to kernel/cgroup/namespace.c
  cgroup: rename functions for consistency
  cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
  cgroup: separate out cgroup1_kf_syscall_ops
  cgroup: refactor mount path and clearly distinguish v1 and v2 paths
  cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
  ...