When you try to visit beyond the end of a list, the qobject input
visitor crashes, and the string visitor screws returns garbage. The
generated list visits never go beyond the list end, but manual visits
could.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-27-git-send-email-armbru@redhat.com>
qapi: Make input visitors detect unvisited list tails
Fix the design flaw demonstrated in the previous commit: new method
check_list() lets input visitors report that unvisited input remains
for a list, exactly like check_struct() lets them report that
unvisited input remains for a struct or union.
Implement the method for the qobject input visitor (straightforward),
and the string input visitor (less so, due to the magic list syntax
there). The opts visitor's list magic is even more impenetrable, and
all I can do there today is a stub with a FIXME comment. No worse
than before.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-26-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
test-qobject-input-visitor: Cover missing nested struct member
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-25-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Demonstrates a design flaw: there is no way to for input visitors to
report that a list visit didn't visit the complete input list. The
generated list visits always do, but manual visits needn't.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-24-git-send-email-armbru@redhat.com>
Lists with elements above INT64_MAX don't work (known bug). Empty
lists don't work (weird).
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-23-git-send-email-armbru@redhat.com>
test-string-input-visitor: Tear down existing test automatically
Call visitor_input_teardown() from visitor_input_test_init(), so you
don't have to call it from the actual tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-22-git-send-email-armbru@redhat.com>
* test_validate_alternate() duplicates the first part of
test_visitor_in_alternate()
Merge the remaining test cases into test-qobject-input-visitor.c, and
drop the now redundant test-qobject-input-strict.c.
Test case "/visitor/input-strict/fail/list" isn't really about lists,
it's about a bad struct nested in a list. Rename accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-21-git-send-email-armbru@redhat.com>
qapi: Drop unused non-strict qobject input visitor
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
The qobject input visitor comes in a strict and a non-strict variant.
This test is the non-strict variant's last user. Turns out it relies
on non-strict only in test_visitor_in_null(), and just out of
laziness. We don't actually test the non-strict behavior.
Clean up test_visitor_in_null(), and switch to the strict variant.
The next commit will drop the non-strict variant.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-19-git-send-email-armbru@redhat.com>
qom: Make object_property_set_qobject()'s input visitor strict
Commit 240f64b made all qobject input visitors created outside tests
strict, except for the one in object_property_set_qobject(). That one
was left behind only because Eric couldn't spare the time to figure
out whether making it strict would break anything, with a TODO
comment. Time to resolve it.
Strict makes a difference only for otherwise successful visits of QAPI
structs or unions. Let's examine what the callers of
object_property_set_qobject() visit:
* qmp_qom_set visits its @value argument. Comes straight from QMP and
can be anything ('any' in the QAPI schema). Strictness matters when
the property's set() method visits a struct or union QAPI type.
No such methods exist, thus switching to strict can't break
anything.
If we acquire such methods in the future, we'll *want* the visitor
to be strict, so that unexpected members get rejected as they should
be.
Switch to strict.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-18-git-send-email-armbru@redhat.com>
qapi: Make string input and opts visitor require non-null input
The string input visitor tries to cope with null input. Null input
isn't used anywhere, and isn't covered by tests. Unsurprisingly, it
doesn't fully work: start_list() crashes because it passes the input
via parse_str() to strtoll() unchecked.
Make string_input_visitor_new() assert its argument isn't null, and
drop the code trying to deal with null input.
The opts visitor crashes when you try to actually visit something with
null input. Make opts_visitor_new() assert its argument isn't null,
mostly for clarity.
qobject_input_visitor_new() already asserts its argument isn't null.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-17-git-send-email-armbru@redhat.com>
visit_optional() is to be called only between visit_start_struct() and
visit_end_struct(). Visitors that don't support struct visits,
i.e. don't implement start_struct(), end_struct(), have no use for it.
Clarify documentation.
The string input visitor doesn't support struct visits. Its
parse_optional() is therefore useless. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-16-git-send-email-armbru@redhat.com>
Error messages refer to nodes of the QObject being visited by name.
Trouble is the names are sometimes less than helpful:
* The name of the root QObject is whatever @name argument got passed
to the visitor, except NULL gets mapped to "null". We commonly pass
NULL. Not good.
Avoiding errors "at the root" mitigates. For instance,
visit_start_struct() can only fail when the visited object is not a
dictionary, and we commonly ensure it is beforehand.
* The name of a QDict's member is the member key. Good enough only
when this happens to be unique.
* The name of a QList's member is "null". Not good.
Improve error messages by referring to nodes by path instead, as
follows:
* The path of the root QObject is whatever @name argument got passed
to the visitor, except NULL gets mapped to "<anonymous>".
* The path of a root QDict's member is the member key.
* The path of a root QList's member is "[%u]", where %u is the list
index, starting at zero.
* The path of a non-root QDict's member is the path of the QDict
concatenated with "." and the member key.
* The path of a non-root QList's member is the path of the QList
concatenated with "[%u]", where %u is the list index.
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'events[0]', expected: object"}}
instead of
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'null', expected: QDict"}}
Aside: calling the thing "parameter" is suboptimal for QMP, because
the root object is "arguments" there.
The qobject output visitor doesn't have this problem because it should
not fail. Same for dealloc and clone visitors.
The string visitors don't have this problem because they visit just
one value, whose name needs to be passed to the visitor as @name. The
string output visitor shouldn't fail anyway.
The options visitor uses QemuOpts names. Their name space is flat, so
the use of QDict member keys as names is fine. NULL names used with
roots and lists could conceivably result in bad error messages. Left
for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-15-git-send-email-armbru@redhat.com>
qapi: Make QObject input visitor set *list reliably
qobject_input_start_struct() sets *list, except when it fails because
qobject_input_get_object() fails, i.e. the input object doesn't exist.
All the other input visitor start_struct(), start_list(),
start_alternate() always set *obj / *list.
Change qobject_input_start_struct() to match.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-14-git-send-email-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Drop unused QIV_STACK_SIZE and unused qobject_input_start_struct()
parameter errp.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-13-git-send-email-armbru@redhat.com>
qapi: Improve a QObject input visitor error message
The QObject input visitor has three error message formats:
* Parameter '%s' is missing
* "Invalid parameter type for '%s', expected: %s"
* "QMP input object member '%s' is unexpected"
The '%s' are member names (or "null", but I'll fix that later).
The last error message calls the thing "QMP input object member"
instead of "parameter". Misleading when the visitor is used on
QObjects that don't come from QMP. Change it to "Parameter '%s' is
unexpected".
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-12-git-send-email-armbru@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
QERR_QMP_BAD_INPUT_OBJECT, QERR_QMP_BAD_INPUT_OBJECT_MEMBER,
QERR_QMP_EXTRA_MEMBER are used in just one place now, except for one
use that has crept into qobject-input-visitor.c.
Drop these macros, to make the (bad) error messages more visible.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-10-git-send-email-armbru@redhat.com>
qmp_check_input_obj() duplicates qmp_dispatch_check_obj(), except the
latter screws up an error message. handle_qmp_command() runs first
the former, then the latter via qmp_dispatch(), masking the screwup.
qemu-ga also masks the screwup, because it also duplicates checks,
just differently.
qmp_check_input_obj() exists because handle_qmp_command() needs to
examine the command before dispatching it. The previous commit got
rid of this need, except for a tracepoint, and a bit of "id" code that
relies on qdict not being null.
Fix up the error message in qmp_dispatch_check_obj(), drop
qmp_check_input_obj() and the tracepoint. Protect the "id" code with
a conditional.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-9-git-send-email-armbru@redhat.com>
qmp: Clean up how we enforce capability negotiation
To enforce capability negotiation before normal operation,
handle_qmp_command() inspects every command before it's handed off to
qmp_dispatch(). This is a bit of a layering violation, and results in
duplicated code.
Before capability negotiation (!cur_mon->in_command_mode), we fail
commands other than "qmp_capabilities". This is what enforces
capability negotiation.
Afterwards, we fail command "qmp_capabilities".
Clean this up as follows.
The obvious place to fail a command is the command itself, so move the
"afterwards" check to qmp_qmp_capabilities().
We do the "before" check in every other command, but that would be
bothersome. Instead, start with an alternate list of commands that
contains only "qmp_capabilities". Switch to the full list in
qmp_qmp_capabilities().
Additionally, replace the generic human-readable error message for
CommandNotFound by one that reminds the user to run qmp_capabilities.
Without that, we'd regress commit 2d5a834.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-8-git-send-email-armbru@redhat.com>
[Mirco-optimization squashed in, commit message typo fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
qapi: Support multiple command registries per program
The command registry encapsulates a single command list. Give the
functions using it a parameter instead. Define suitable command lists
in monitor, guest agent and test-qmp-commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-6-git-send-email-armbru@redhat.com>
[Debugging turds buried] Reviewed-by: Eric Blake <eblake@redhat.com>
qmp: Dumb down how we run QMP command registration
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-4-git-send-email-armbru@redhat.com>
The next commit is going to add a test that calls qmp("null").
Curiously, this hangs. Here's why.
qmp_fd_sendv() doesn't send newlines. Not even when @fmt contains
some. At first glance, the QMP parser seems to be fine with that.
However, it turns out that it fails to react to input until it sees
either a newline, an object or an array. To reproduce, feed to a QMP
monitor like this:
Work around this QMP bug by having qmp_fd_sendv() append a newline.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-3-git-send-email-armbru@redhat.com>
The value of key 'arguments' must be a JSON object. qemu-ga neglects
to check, and crashes. To reproduce, send
{ 'execute': 'guest-sync', 'arguments': [] }
to qemu-ga.
do_qmp_dispatch() uses qdict_get_qdict() to get the arguments. When
not a JSON object, this gets a null pointer, which flows through the
generated marshalling function to qobject_input_visitor_new(), where
it fails the assertion. qmp_dispatch_check_obj() needs to catch this
error.
QEMU isn't affected, because it runs qmp_check_input_obj() first,
which basically duplicates qmp_dispatch_check_obj()'s checks, plus the
missing one.
Fix by copying the missing one from qmp_check_input_obj() to
qmp_dispatch_check_obj().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-2-git-send-email-armbru@redhat.com>
Peter Maydell [Sat, 4 Mar 2017 16:31:14 +0000 (16:31 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170303' into staging
ppc patch queuye for 2017-03-03
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
* remotes/dgibson/tags/ppc-for-2.9-20170303:
target/ppc: rewrite f[n]m[add,sub] using float64_muladd
spapr: Small cleanup of PPC MMU enums
spapr_pci: Advertise access to PCIe extended config space
target/ppc: Rework hash mmu page fault code and add defines for clarity
target/ppc: Move no-execute and guarded page checking into new function
target/ppc: Add execute permission checking to access authority check
target/ppc: Add Instruction Authority Mask Register Check
hw/ppc/spapr: Add POWER9 to pseries cpu models
target/ppc/POWER9: Add cpu_has_work function for POWER9
target/ppc/POWER9: Add POWER9 pa-features definition
target/ppc/POWER9: Add POWER9 mmu fault handler
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
target/ppc: Add patb_entry to sPAPRMachineState
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
powernv: Don't test POWER9 CPU yet
exec, kvm, target-ppc: Move getrampagesize() to common code
target/ppc: Add POWER9/ISAv3.00 to compat_table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 3 Mar 2017 16:28:49 +0000 (17:28 +0100)]
nios2: avoid anonymous unions in designated initializers.
These cause compilation failures on CentOS 6 or other operating
systems with older GCCs.
Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 3 Mar 2017 16:28:48 +0000 (17:28 +0100)]
hppa: avoid anonymous unions in designated initializers.
These cause compilation failures on CentOS 6 or other operating
systems with older GCCs.
Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1488558530-21016-1-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/tags/for-upstream: (21 commits)
iscsi: fix missing unlock
memory: show region offset and ROM/RAM type in "info mtree -f"
x86: Work around SMI migration breakages
spice-char: fix segfault in char_spice_finalize
vl: disable default cdrom when using explicitely scsi-hd
memory: Introduce DEVICE_HOST_ENDIAN for ram device
qmp-events: fix GUEST_PANICKED description formatting
qapi: flatten GuestPanicInformation union
vmxcap: update for September 2016 SDM
vmxcap: port to Python 3
KVM: use KVM_CAP_IMMEDIATE_EXIT
kvm: use atomic_read/atomic_set to access cpu->exit_request
KVM: move SIG_IPI handling to kvm-all.c
KVM: do not use sigtimedwait to catch SIGBUS
KVM: remove kvm_arch_on_sigbus
cpus: reorganize signal handling code
KVM: x86: cleanup SIGBUS handlers
cpus: remove ugly cast on sigbus_handler
cpu-exec: remove unnecessary check of cpu->exit_request
replay: check icount in cpu exec loop
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Thu, 2 Mar 2017 21:49:41 +0000 (22:49 +0100)]
memory: show region offset and ROM/RAM type in "info mtree -f"
"info mtree -f" output is currently hard to use for large RAM regions, because
there is no hint as to what part of the region is being mapped. Add the offset
if it is nonzero.
Secondly, FlatView has a readonly field, that can override the MemoryRegion
in the presence of aliases. Take it into account.
Migration from a 2.3.0 qemu results in a reboot on the receiving QEMU
due to a disagreement about SM (System management) interrupts.
2.3.0 didn't have much SMI support, but it did set CPU_INTERRUPT_SMI
and this gets into the migration stream, but on 2.3.0 it
never got delivered.
~2.4.0 SMI interrupt support was added but was broken - so
that when a 2.3.0 stream was received it cleared the CPU_INTERRUPT_SMI
but never actually caused an interrupt.
The SMI delivery was recently fixed by 68c6efe07a, but the
effect now is that an incoming 2.3.0 stream takes the interrupt it
had flagged but it's bios can't actually handle it(I think
partly due to the original interrupt not being taken during boot?).
The consequence is a triple(?) fault and a reboot.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170223133441.16010-1-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Li Qiang [Tue, 21 Feb 2017 08:18:27 +0000 (00:18 -0800)]
spice-char: fix segfault in char_spice_finalize
In 'qemu_chr_open_spice_vmc' if the 'psubtype' is NULL, it will
call 'char_spice_finalize'. But as the SpiceChardev is not inserted
in the 'spice_chars' list, the 'QLIST_REMOVE' will cause a segfault.
Add a detect to avoid it.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-Id: <1487665107-88004-1-git-send-email-liqiang6-s@360.cn> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Li Qiang <liq3ea@gmail.com>
Hervé Poussineau [Mon, 20 Feb 2017 20:41:19 +0000 (21:41 +0100)]
vl: disable default cdrom when using explicitely scsi-hd
In commit af6bf1328ef90fae617857c02697e0174b84d596 (May 2011),
ide-hd, ide-cd and scsi-cd have been added to disable default cdrom,
"or else you can't put one on secondary master without -nodefaults".
Make it the same for scsi-hd, so you can put one on scsi-id 2 without
using -nodefaults.
scsi-hd has probably been forgotten, as it has been added in the
preceding commit (b443ae67130d32ad06b06fc9aa6d04d05ccd93ce).
Affected users are the ones using a machine with SCSI devices and start QEMU
with -device scsi-hd but without -device scsi-cd or -cdrom
In that case, the default cdrom device will disappear instead of being empty.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1487623279-29930-1-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yongji Xie [Mon, 27 Feb 2017 04:52:44 +0000 (12:52 +0800)]
memory: Introduce DEVICE_HOST_ENDIAN for ram device
At the moment ram device's memory regions are DEVICE_NATIVE_ENDIAN. It's
incorrect. This memory region is backed by a MMIO area in host, so the
uint64_t data that MemoryRegionOps read from/write to this area should be
host-endian rather than target-endian. Hence, current code does not work
when target and host endianness are different which is the most common case
on PPC64. To fix it, this introduces DEVICE_HOST_ENDIAN for the ram device.
This has been tested on PPC64 BE/LE host/guest in all possible combinations
including TCG.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Message-Id: <1488171164-28319-1-git-send-email-xyjxie@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-4-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Anton Nefedov [Mon, 20 Feb 2017 18:21:54 +0000 (21:21 +0300)]
qapi: flatten GuestPanicInformation union
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Feb 2017 12:52:50 +0000 (13:52 +0100)]
KVM: use KVM_CAP_IMMEDIATE_EXIT
The purpose of the KVM_SET_SIGNAL_MASK API is to let userspace "kick"
a VCPU out of KVM_RUN through a POSIX signal. A signal is attached
to a dummy signal handler; by blocking the signal outside KVM_RUN and
unblocking it inside, this possible race is closed:
VCPU thread service thread
--------------------------------------------------------------
check flag
set flag
raise signal
(signal handler does nothing)
KVM_RUN
However, one issue with KVM_SET_SIGNAL_MASK is that it has to take
tsk->sighand->siglock on every KVM_RUN. This lock is often on a
remote NUMA node, because it is on the node of a thread's creator.
Taking this lock can be very expensive if there are many userspace
exits (as is the case for SMP Windows VMs without Hyper-V reference
time counter).
KVM_CAP_IMMEDIATE_EXIT provides an alternative, where the flag is
placed directly in kvm_run so that KVM can see it:
VCPU thread service thread
--------------------------------------------------------------
raise signal
signal handler
set run->immediate_exit
KVM_RUN
check run->immediate_exit
The previous patches changed QEMU so that the only blocked signal is
SIG_IPI, so we can now stop using KVM_SET_SIGNAL_MASK and sigtimedwait
if KVM_CAP_IMMEDIATE_EXIT is available.
On a 14-VCPU guest, an "inl" operation goes down from 30k to 6k on
an unlocked (no BQL) MemoryRegion, or from 30k to 15k if the BQL
is involved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Feb 2017 11:48:54 +0000 (12:48 +0100)]
KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Feb 2017 09:04:34 +0000 (10:04 +0100)]
KVM: remove kvm_arch_on_sigbus
Build it on kvm_arch_on_sigbus_vcpu instead. They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Feb 2017 08:50:02 +0000 (09:50 +0100)]
cpus: reorganize signal handling code
Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Feb 2017 12:22:12 +0000 (13:22 +0100)]
cpus: remove ugly cast on sigbus_handler
The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.
Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Fri, 3 Mar 2017 14:04:27 +0000 (14:04 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/submodule-update-20170303' into staging
submodule updates (SLOF & dtc) 2017-03-03
This set of patches updates the SLOF and dtc submodules for qemu-2.9.
The SLOF update could have gone in my ppc pull request earlier today,
but I forgot it. It should be safe to apply in either order with that
set though.
The dtc (and libfdt) update brings us up to dtc 1.4.3 which includes
some things that will be useful in future.
Peter Maydell [Fri, 3 Mar 2017 12:48:42 +0000 (12:48 +0000)]
dtc: Revert unintentional submodule downgrade from commit 077dd74239a99
Commit 077dd74239a99 inadvertently downgraded the 'dtc' submodule,
undoing the increment added in commit 6e85fce0225f. Revert this,
returning the submodule state to where we should be.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 3 Mar 2017 10:09:03 +0000 (10:09 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pxb-pcie: fix PCI Express hotplug support
tests/acpi: update DSDT after last patch
acpi: simplify _OSC
virtio: unbreak virtio-pci with IOMMU after caching ring translations
virtio: add missing region cache init in virtio_load()
virtio: invalidate memory in vring_set_avail_event()
virtio: guard vring access when setting notification
virtio: check for vring setup in virtio_queue_empty
MAINTAINERS: Add VM Generation ID entries
tests: Move reusable ACPI code into a utility file
qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
ACPI: Add Virtual Machine Generation ID support
ACPI: Add vmgenid blob storage to the build tables
docs: VM Generation ID device description
linker-loader: Add new 'write pointer' command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David Gibson [Fri, 3 Mar 2017 03:54:38 +0000 (14:54 +1100)]
Update dtc submodule to v1.4.3
Since the last submodule update (which was v1.4.2) dtc and libfdt have
gained some features which would be useful in qemu. There's now a v1.4.3
upstream release, so update our submodule to point to it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> qemu-bootlist: Take the "-boot strict=off" setting properly into account
> virtio-scsi: initialize vring avail queue buffers
> virtio: Remove global variables in block and 9p driver
> Remove superfluous checkpoints in tree.fs
> Provide "write" function in the disk-label package
> virtio: Implement block write support
> scsi: Add SCSI block write support
> deblocker: Add a 'write' function
> virtio-scsi: Fix descriptor order for SCSI WRITE commands
> board-qemu: Add a possibility to use hvterm input instead of USB keyboard
> Do not try to use virtio-gpu in VGA mode
> virtio: Fix stack comment of virtio-blk-read
> envvar: Do not read default values for /options from the NVRAM anymore
> envvar: Set properties in /options during "(set-defaults)"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sam Bobroff [Thu, 2 Mar 2017 05:38:56 +0000 (16:38 +1100)]
spapr: Small cleanup of PPC MMU enums
The PPC MMU types are sometimes treated as if they were a bit field
and sometime as if they were an enum which causes maintenance
problems: flipping bits in the MMU type (which is done on both the 1TB
segment and 64K segment bits) currently produces new MMU type
values that are not handled in every "switch" on it, sometimes causing
an abort().
This patch provides some macros that can be used to filter out the
"bit field-like" bits so that the remainder of the value can be
switched on, like an enum. This allows removal of all of the
"degraded" types from the list and should ease maintenance.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Wed, 1 Mar 2017 05:23:12 +0000 (16:23 +1100)]
spapr_pci: Advertise access to PCIe extended config space
The (paravirtual) PCI host bridge on the 'pseries' machine in most
regards acts like a regular PCI bus, rather than a PCIe bus. Despite
this, though, it does allow access to the PCIe extended config space.
We already implemented the RTAS methods to allow this access.. but
forgot to put the markers into the device tree so that guest's know it
is there. This adds them in.
With this, a pseries guest is able to view extended config space on
(for example an e1000e device. This should be enough to allow guests
to use at least some PCIe devices.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: Rework hash mmu page fault code and add defines for clarity
The hash mmu page fault handling code is responsible for generating ISIs
and DSIs when access permissions cause an access to fail. Part of this
involves setting the srr1 or dsisr registers to indicate what causes the
access to fail. Add defines for the bit fields of these registers and
rework the code to use these new defines in order to improve readability
and code clarity.
While we're here, update what is logged when an access fails to include
information as to what caused to access to fail for debug purposes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Moved constants to cpu.h since they're not MMUv3 specific] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: Move no-execute and guarded page checking into new function
A pte entry has bit fields which can be used to make a page no-execute or
guarded, if either of these bits are set then an instruction access to this
page will fail. Currently these bits are checked with the pp_prot function
however the ISA specifies that the access authority controlled by the
key-pp value pair should only be checked on an instruction access after
the no-execute and guard bits have already been verified to permit the
access.
Move the no-execute and guard bit checking into a new separate function.
Note that we can remove the check for the no-execute bit in the slb entry
since this check was already performed above when we obtained the slb
entry.
In the event that the no-execute or guard bits are set, an ISI should be
generated with the SRR1_NOEXEC_GUARD (0x10000000) bit set in srr1. Add a
define for this for clarity.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Move constants to cpu.h since they're not MMUv3 specific] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: Add execute permission checking to access authority check
Basic storage protection defines various access authority permissions
based on a slb storage key and pte pp value pair. This access authority
defines read, write and execute permissions however currently we only
use this to control read and write permissions and ignore the execute
control.
Fix the code to allow execute permissions based on the key-pp value pair.
Execute is allowed under the same conditions which enable reads.
(i.e. read permission -> execute permission)
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The instruction authority mask register (IAMR) can be used to restrict
permissions for instruction fetch accesses on a per key basis for each
of 32 different key values. Access permissions are derived based on the
specific key value stored in the relevant page table entry.
The IAMR was introduced in, and is present in processors since, POWER8
(ISA v2.07). Thus introduce a function to check access permissions based
on the pte key value and the contents of the IAMR when handling a page
fault to ensure sufficient access permissions for an instruction fetch.
A hash pte contains a key value in bits 2:3|52:54 of the second double word
of the pte, this key value gives an index into the IAMR which contains 32
2-bit access masks. If the least significant bit of the 2-bit access mask
corresponding to the given key value is set (IAMR[key] & 0x1 == 0x1) then
the instruction fetch is not permitted and an ISI is generated accordingly.
While we're here, add defines for the srr1 bits to be set for the ISI for
clarity.
Least significant bit of the access mask is set, thus the instruction fetch
is not permitted. We should generate an instruction storage interrupt (ISI)
with bit 42 of SRR1 set to indicate access precluded by virtual page class
key protection.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Move new constants to cpu.h, since they're not MMUv3 specific] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc/POWER9: Add cpu_has_work function for POWER9
The cpu has work function is used to mask interrupts used to determine
if there is work for the cpu based on the LPCR. Add a function to do this
for POWER9 and add it to the POWER9 cpu definition. This is similar to that
for POWER8 except using the LPCR bits as defined for POWER9.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a pa-features definition which includes all of the new fields which
have been added, note we don't claim support for any of these new features
at this stage.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
POWER9 doesn't have a storage description register 1 (SDR1) which is used
to store the base and size of the hash table. Thus we don't need to
generate this register on the POWER9 cpu model. While we're here, the
register generation code for 970, POWER5+, POWER<7/8/9> in general is a
mess where we call a generic function from a model specific function which
then attempts to call model specific functions, so rework this for
readability.
We update ppc_cpu_dump_state so that "info registers" will only display
the value of sdr1 if the register has been generated.
As mentioned above the register generation for the pcc->init_proc
function for 970, POWER5+, POWER7, POWER8 and POWER9 has been reworked
for improved clarity. Instead of calling init_proc_book3s_64 which then
attempts to generate the correct registers through a mess of if statements,
we remove this function and instead call the appropriate register
generation functions directly. This follows the register generation model
used for earlier cpu models (pre-970) whereby cpu specific registers are
generated directly in the init_proc function and makes it easier to
add/remove specific registers for new cpu models.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA v3.00 adds the idea of a partition table which is used to store the
address translation details for all partitions on the system. The partition
table consists of double word entries indexed by partition id where the second
double word contains the location of the process table in guest memory. The
process table is registered by the guest via a h-call.
We need somewhere to store the address of the process table so we add an entry
to the sPAPRMachineState struct called patb_entry to represent the second
doubleword of a single partition table entry corresponding to the current
guest. We need to store this value so we know if the guest is using radix or
hash translation and the location of the corresponding process table in guest
memory. Since we only have a single guest per qemu instance, we only need one
entry.
Since the partition table is technically a hypervisor resource we require that
access to it is abstracted by the virtual hypervisor through the get_patbe()
call. Currently the value of the entry is never set (and thus
defaults to 0 indicating hash), but it will be required to both implement
POWER9 kvm support and tcg radix support.
We also add this field to be migrated as part of the sPAPRMachineState as we
will need it on the receiving side as the guest will never tell us this
information again and we need it to perform translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Thu, 2 Mar 2017 01:13:07 +0000 (12:13 +1100)]
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
For easier handling of future processors using the POWER9 or something
close to it, add a new bit in the MMU model. This was originally from a
revised version of 86cf1e9 "target/ppc/POWER9: Add ISAv3.00 MMU definition"
but the older version of the patch was already merged. This makes the
change on top of the original version.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Thu, 2 Mar 2017 04:29:31 +0000 (15:29 +1100)]
powernv: Don't test POWER9 CPU yet
A couple of tests for the work-in-progress 'powernv' machine type attempt
to test on POWER9 CPUs. However the POWER9 CPU support is incomplete and
this doesn't really work. In particular the firmware image we have
currently assumes the presence of the SDR1 register, which no longer exists
on POWER9. We only got away with this so far, because of a different bug
which added SDR1 to POWER9 even though it shouldn't be there.
For now, remove POWER9 testing of powernv, POWER8 testing will do for now
until the POWER9 support is more complete.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
exec, kvm, target-ppc: Move getrampagesize() to common code
getrampagesize() returns the largest supported page size and mainly
used to know if huge pages are enabled.
However is implemented in target-ppc/kvm.c and not available
in TCG or other architectures.
This renames and moves gethugepagesize() to mmap-alloc.c where
fd-based analog of it is already implemented. This renames and moves
getrampagesize() to exec.c as it seems to be the common place for
helpers like this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
compat_table contains the list of logical pvr compat modes which a cpu can
operate in. It is a list of struct CompatInfo which contains the given pvr
value for a compat mode, the pcr bits which should be set to operate in
that compat mode, the pcr level which must be present in pcr_supported for
a processor to support that compat mode and the max threads possible in
that compat mode.
Add an entry for the POWER9/ISAv3.00 logical pvr which represents a
processor running with support for logical pvr 0x0f000005. A processor
running in this mode should have PCR_COMPAT_3_00 set in the pcr (if
available in pcr_mask) and should have PCR_COMPAT_3_00 in pcr_supported
to indicate that it is capable of running in this compat mode.
Also add PCR_COMPAT_3_00 to the bits which must be set for all previous
compat modes. Since no processor models contain this bit yet in pcr_mask
it will never be set, but this ensures we don't forget to in the future.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Thu, 2 Mar 2017 23:20:37 +0000 (23:20 +0000)]
Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
# gpg: Signature made Thu 02 Mar 2017 03:42:59 GMT
# gpg: using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/block-pull-request:
block/rbd: add support for 'mon_host', 'auth_supported' via QAPI
block/rbd: add blockdev-add support
block/rbd: parse all options via bdrv_parse_filename
block/rbd: add all the currently supported runtime_opts
block/rbd: don't copy strings in qemu_rbd_next_tok()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Mar 2017 17:39:12 +0000 (17:39 +0000)]
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging
Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
postcopy: Add extra check for COPY function
postcopy: Add doc about hugepages and postcopy
postcopy: Check for userfault+hugepage feature
postcopy: Update userfaultfd.h header
postcopy: Allow hugepages
postcopy: Send whole huge pages
postcopy: Mask fault addresses to huge page boundary
postcopy: Load huge pages in one go
postcopy: Use temporary for placing zero huge pages
postcopy: Plumb pagesize down into place helpers
postcopy: Record largest page size
postcopy: enhance ram_block_discard_range for hugepages
exec: ram_block_discard_range
postcopy: Chunk discards for hugepages
postcopy: Transmit and compare individual page sizes
postcopy: Transmit ram size summary word
migration: fix use-after-free of to_dst_file
migration: Update docs to discourage version bumps
migration: fix id leak regression
migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Mar 2017 15:25:37 +0000 (15:25 +0000)]
Merge remote-tracking branch 'remotes/elmarco/tags/leak-pull-request' into staging
# gpg: Signature made Wed 01 Mar 2017 09:02:53 GMT
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/leak-pull-request: (28 commits)
tests: fix virtio-blk-test leaks
tests: add specialized device_find function
tests: fix usb-test leaks
tests: allows to run single test in usb-hcd-ehci-test
usb: release the created buses
bus: do not unref hotplug handler
tests: fix virtio-9p-test leaks
tests: fix virtio-scsi-test leak
tests: fix e1000e leaks
tests: fix i440fx-test leaks
tests: fix e1000-test leak
tests: fix tco-test leaks
tests: fix eepro100-test leak
pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice
tests: fix ipmi-bt-test leak
tests: fix ipmi-kcs-test leak
tests: fix bios-tables-test leak
tests: fix hd-geo-test leaks
tests: fix ide-test leaks
tests: fix vhost-user-test leaks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Mar 2017 13:50:54 +0000 (13:50 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170301' into staging
ppc patch queue for 2017-03-01
I was hoping to get this pull request squeezed in before the soft
freeze, but I ran into some difficulties during testing. Everything
here was at least posted before the soft freeze, so I'm hoping we can
still merge it for 2.9.
The biggest things here are:
* Cleanups to handling of hashed page tables, that will make
adding support for the POWER9 MMU easier
* Cleanups to the XICS interrupt controller that will make
implementing the powernv machine easier
* TCG implementation of extended overflow and carry handling for
POWER9
It also includes:
* Increasing the CPU limit for pseries to 1024 vCPUs
* Generating proper OF node names in qemu (making hotplug and
coldplug logic closer together)
* remotes/dgibson/tags/ppc-for-2.9-20170301: (50 commits)
Add PowerPC 32-bit guest memory dump support
ppc/xics: rename 'ICPState *' variables to 'icp'
ppc/xics: move InterruptStatsProvider to the sPAPR machine
ppc/xics: move ics-simple post_load under the machine
ppc/xics: remove the XICSState classes
ppc/xics: export the XICS init routines
ppc/xics: move the ICP array under the sPAPR machine
ppc/xics: register the reset handler of ICP objects
ppc/xics: simplify spapr_dt_xics() interface
ppc/xics: use the QOM interface to grab an ICP
ppc/xics: move the cpu_setup() handler under the ICPState class
ppc/xics: simplify the cpu_setup() handler
ppc/xics: move kernel_xics_fd out of KVMXICSState
ppc/xics: extend the QOM interface to handle ICPs
ppc/xics: remove the XICS list of ICS
ppc/xics: register the reset handler of ICS objects
ppc/xics: remove xics_find_source()
ppc/xics: use the QOM interface to resend irqs
ppc/xics: use the QOM interface to get irqs
ppc/xics: use the QOM interface under the sPAPR machine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 2 Mar 2017 11:18:01 +0000 (11:18 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 queue, 2017-02-27
"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.
# gpg: Signature made Mon 27 Feb 2017 16:24:15 GMT
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
i386: Improve query-cpu-model-expansion full mode
i386: Implement query-cpu-model-expansion QMP command
i386: Define static "base" CPU model
i386: Don't set CPUClass::cpu_def on "max" model
i386: Make "max" model not use any host CPUID info on TCG
i386: Create "max" CPU model
qapi-schema: Comment about full expansion of non-migration-safe models
i386: Reorganize and document CPUID initialization steps
i386: Rename X86CPU::host_features to X86CPU::max_features
i386: Add ordering field to CPUClass
i386: Unset cannot_destroy_with_object_finalize_yet on "host" model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marcel Apfelbaum [Tue, 28 Feb 2017 14:13:29 +0000 (16:13 +0200)]
hw/pxb-pcie: fix PCI Express hotplug support
Add the missing osc method for pxb-pcie devices as APCI spec recommends,
see 6.2.9.1 OSC Implementation Example for PCI Host Bridge Devices, ACPI 3.0a:
It is recommended that a machine with multiple host bridge devices
should report the same capabilities for all host bridges, and also
negotiate control of the features described in the Control Field in
the same way for all host bridges.
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our _OSC method has a bunch of unused code loading data
into external CTRL and SUPP fields which are then never
used. Drop this in favor of a single local variable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Jason Wang [Wed, 1 Mar 2017 04:10:40 +0000 (12:10 +0800)]
virtio: unbreak virtio-pci with IOMMU after caching ring translations
Commit c611c76417f5 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.
With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.
Fixes: c611c76417f5 ("virtio: add MemoryListener to cache ring translations") Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Hajnoczi [Wed, 22 Feb 2017 16:37:34 +0000 (16:37 +0000)]
virtio: add missing region cache init in virtio_load()
Commit 97cd965c070152bc626c7507df9fb356bbe1cd81 ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.
The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places. VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail. Legacy devices only
serialize desc.
Live migration of VIRTIO 1.0 devices fails on the destination host with:
VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
Failed to load virtio-blk:virtio
error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'
This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.
Wait until all ring addresses are known before trying to initialize the
region cache. Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Eric Auger <eric.auger@redhat.com>
Stefan Hajnoczi [Wed, 22 Feb 2017 16:37:33 +0000 (16:37 +0000)]
virtio: invalidate memory in vring_set_avail_event()
Remember to invalidate the avail event field so the memory pages are
marked dirty.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com>
Cornelia Huck [Wed, 1 Mar 2017 17:58:52 +0000 (18:58 +0100)]
virtio: guard vring access when setting notification
Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.
Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Thu, 23 Feb 2017 08:51:30 +0000 (09:51 +0100)]
virtio: check for vring setup in virtio_queue_empty
If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Ben Warren [Thu, 16 Feb 2017 23:15:40 +0000 (15:15 -0800)]
MAINTAINERS: Add VM Generation ID entries
Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Ben Warren [Thu, 16 Feb 2017 23:15:38 +0000 (15:15 -0800)]
tests: Move reusable ACPI code into a utility file
Also usable by upcoming VM Generation ID tests
Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ben Warren [Thu, 16 Feb 2017 23:15:36 +0000 (15:15 -0800)]
ACPI: Add Virtual Machine Generation ID support
This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest
The user interface is a simple device with one parameter:
- guid (string, must be "auto" or in UUID format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ben Warren [Thu, 16 Feb 2017 23:15:35 +0000 (15:15 -0800)]
ACPI: Add vmgenid blob storage to the build tables
This allows them to be centrally initialized and destroyed
The "AcpiBuildTables.vmgenid" array will be used to construct the
"etc/vmgenid_guid" fw_cfg blob.
Its contents will be linked into fw_cfg after being built on the
pc_machine_done() -> acpi_setup() -> acpi_build() call path, and dropped
without use on the subsequent, guest triggered, acpi_build_update() ->
acpi_build() call path.
Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ben Warren [Thu, 16 Feb 2017 23:15:34 +0000 (15:15 -0800)]
docs: VM Generation ID device description
This patch is based off an earlier version by
Gal Hammer (ghammer@redhat.com)
Requirements section, ASCII diagrams and overall help
provided by Laszlo Ersek (lersek@redhat.com)
Signed-off-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ben Warren [Thu, 16 Feb 2017 23:15:33 +0000 (15:15 -0800)]
linker-loader: Add new 'write pointer' command
This is similar to the existing 'add pointer' functionality, but instead
of instructing the guest (BIOS or UEFI) to patch memory, it instructs
the guest to write the pointer back to QEMU via a writeable fw_cfg file.
Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
projects / mirror_qemu.git / log