ACPICA: Tables: Avoid SSDT installation with acpi_gbl_disable_ssdt_table_load.
It is reported that when acpi_gbl_disable_ssdt_table_load is specified, user
still can see it installed into /sys/firmware/acpi/tables on Linux boxes.
This is because the option only stops table "loading", but doesn't stop
table "installing", thus it is still in the acpi_gbl_root_table_list. With
previous cleanups, it is possible to prevent SSDT installations to make
it not such confusing. The global variable is also renamed. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch refines ACPI_TABLE_ORIGIN_xxx flags. No functional changes.
The previous commits have introduced the following internal APIs:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
It thus detects that the ACPI_TABLE_ORIGIN_UNKNOWN is redundant to
ACPI_TABLE_ORIGIN_OVERRIDE.
The ACPI_TABLE_ORIGIN_xxTERN_VIRTUAL flags are named as VIRTUAL in order
not to confuse with x86 logical address, this patch also renames all
"logical override" into "virtual override".
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Tables: Fix table checksums verification before installation.
The original table handling code does not always verify checksums before
installing a table, this is because code to achieve this must be
implemented here and there in the redundant code blocks.
There are two stages during table initialization:
1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(),
struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used
during OSPM's early boot stage.
2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is
ensured to be not NULL. This must not be used during OSPM's early boot
stage.
This patch changes acpi_tb_add_table() into an early boot safe API to reduce
code redundancies by changing the table state that is returned by this
function from "VALIDATED" to "INSTALLED". Then the table verification
code can be done in a single place. Originally, the acpi_tb_add_table() can
only be used by dynamic table loadings that are executed after early boot
stage, it cannot be used by static table loadings that are executed in
early boot stage as:
1. The address of the table is a virtual address either maintained by
OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or
"LoadTable" opcodes are executed, while during early boot stage,
physical address of the table should be used for table loading.
2. The API will ensure the state of the loaded table to be "VALIDATED"
while during early boot stage, tables maintained by root table list
should be kept as "INSTALLED".
To achieve this:
1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only
applies to DSDT/FACS installation. Rename acpi_tb_add_table() to
acpi_tb_install_non_fixed_table() as it will be applied to the installation
of the rest kinds of tables.
2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect
redudant code where their invocations actually have slight differences.
1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the
table length is known to the caller.
2. acpi_tb_install_and_override_table() is used to perform necessary
overriding before installation.
3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc
to acpi_physical_address to allow it to be invoked by static table
loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate
to the parameter change.
4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than
DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability
(logics are collected in the single function). Also delete useless code
from acpi_tb_parse_root_table().
5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and
acpi_tb_install_fixed_table() so that the table descriptor is kept in the
state of "INSTALLED" but not "VALIDATED" after returning from these
functions.
6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into
the functions to indicate a table descriptor that is not maintained by
acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and
acpi_tb_release_temporal_table() to handle the use cases of such temporal
tables. They are only used for verified installation.
7. Introduce acpi_tb_verify_table() to validate table and verify table
checksum, also remove table checksum verification from
acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions
that will convert a table into "LOADED" state or invoke it from
acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary
struct acpi_table_desc(s) that are going to be "INSTALLED".
8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc
will be overridden before installtion, this makes code simpler.
After applying the patch, tables are always installed after being
overridden and the table checksums are always verified before installation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As acpi_tb_validate_table() returns failure on checksum verification without
doing invalidatation, all its invocations that are not done to a descriptor
stored in acpi_gbl_root_table_list are checked and balanced.
But this is not a real issue as the descritors that have been passed to
acpi_tb_add_table() are all virtual address tables and the validations are in
fact no-op. The cleanup can ensure that any future extensions made on
acpi_tb_add_table() to allow it to be invoked with physical address tables
will not trigger memory leakage regressions.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics.
This patch is mainly a naming cleanup to clarify hidden logics, no
functional changes.
acpi_initialize_tables() is used by Linux to install table addresses for
early boot steps. During this stage, table addresses are mapped by
early_ioremap() mechanism which is different from the runtime IO mappings.
Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc
structure during this stage.
In order to support this in ACPICA, table states are divided into
1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and
2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL).
During acpi_initialize_tables(), table state are ensured to be "INSTALLED"
but not "VALIDATED". This logic is ensured by the original code in very
ambigious way. For example, currently acpi_tb_delete_table() is invoked in
some place to perform an uninstallation while it is invoked in other place
to perform an invalidation. They happen to work just because no one enters
the penalty where the 2 behaviours are not equivalent.
The naming cleanups are made in this patch:
A. For installation and validation:
There is code setting struct acpi_table_desc.Pointer first and delete it
immediately to keep the descriptor's state as "INSTALLED" during the
installation. This patch implements this in more direct way. After
applying it, struct acpi_table_desc.Pointer will never be set in
acpi_tb_install_table() and acpi_tb_override_table() as they are the only
functions invoked during acpi_initialize_tables(). This is achieved by:
1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this
change.
2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing
consistencies as other APIs (verb. Table).
3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and
acpi_tb_table_override().
4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not
maintained in the struct acpi_table_desc of the global root table list and
rewrite acpi_tb_validate_table() using this new function to reduce
redundancies.
5. Replace the table pointer using the overridden table pointer in
acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot
stage, tables returned from this functions should be "VALIDATED". As
acpi_tb_override_table() is modified by this patch to return a "INSTALLED"
but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged,
struct acpi_table_desc.Pointer is filled in acpi_tb_add_table().
B. For invalidation and uninstallation:
The original code invalidate table by invoking acpi_tb_delete_table() here
and there, but actually this function should only be used to uninstall
tables. This can work just because its invocations are equivalent to
invalidation in some cases.
This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and
acpi_tb_uninstall_table() and cleans up the hidden logic using the new
APIs. This is achieved by:
1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly
called before resetting struct acpi_table_desc.Address. Thus the table
descriptor is in "not INSTALLED" state. This patch enforces this by
setting struct acpi_table_desc.Address to NULL in this function.
2. Introduce acpi_tb_invalidate_table() to be the reversal of
acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table().
3. Introduce acpi_tb_release_table() to release the table pointer that is not
maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table()
using this new function to reduce redundancies.
After cleaning up, the maintainability of the internal APIs are also
improved:
1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
2. acpi_tb_release_table: Release struct acpi_table_header according to
ACPI_TABLE_ORIGIN_xxx flags.
3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to
ACPI_TABLE_ORIGIN_xxx flags.
7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and
struct acpi_table_desc.Flags. It only happens in
"INSTALLED" state.
The patch has been unit tested in acpi_exec by:
1. Initializing;
2. Executing exc_tbl ASLTS tests;
3. Executing "Load" command.
So that all original acpi_tb_install_table() and acpi_tb_override_table()
invocations are covered.
Known Issues:
1. Cleanup acpi_tb_add_table() to Kill Code Redundancies
Current implementation in acpi_tb_add_table() is not very clean, further
patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(),
acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this
patch so that it is easy for the reviewers to understand the changes in
this patch.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Tables: Fix multiple ACPI_FREE()s around acpi_tb_add_table().
Currently there are following issues in acpi_tb_add_table():
Following logic is currently correct:
1. When a table is allocated in acpi_ex_load_op(), if a reloading happens,
the allocated memory is freed by acpi_tb_add_table() and AE_OK is
returned to the caller to avoid the caller to free it again.
Following logic is currently incorrect:
1. When a table is allocated in acpi_ex_load_op() or by the
acpi_load_table() caller, if the table is already loaded, there will be
twice ACPI_FREE() called for the same pointer when acpi_tb_add_table()
returns AE_ALREADY_EXISTS.
This patch only fixes the above incorrect logic in acpi_tb_add_table():
1. Only invoke acpi_tb_delete_table() if AE_OK is going to be returned.
2. After doing so, we do not invoke ACPI_FREE() when returning AE_OK;
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Tables: Fix the issues in handling virtual addressed tables.
When table is overridden or reloaded, acpi_tb_delete_table() is called where
struct acpi_table_desc.Pointer will be NULL. It thus is impossible for virtual
addressed tables to obtain the .Pointer again in acpi_tb_verify_table().
This patch stores virtual table addresses (ACPI_TABLE_ORIGIN_ALLOCATED,
ACPI_TABLE_ORIGIN_UNKNOWN, ACPI_TABLE_ORIGIN_OVERRIDE) in the
struct acpi_table_desc.Address field and refills the struct acpi_table_desc.Pointer
using these addresses in acpi_tb_verify_table(). Note that if a table with
ACPI_TABLE_ORIGIN_ALLOCATED set is actually freed, the .Address field
should be invalidated and thus must be replaced with NULL to avoid wrong
future validations occuring in acpi_tb_verify_table().
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Remove indent divergences to reduce maintenance overhead.
The divergences in the ACPICA files makes it difficult to maintain linuxize
ACPICA table commits. This patch reduces such divergences before applying
table manager commits so that human interventions of patch rebasing can be
reduced.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:38:12 +0000 (12:38 +0800)]
ACPICA: Add a missing field for debug dump of mutex objects.
Adds "OriginalSyncLevel" field to the output.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Colin Ian King [Fri, 4 Apr 2014 04:38:05 +0000 (12:38 +0800)]
ACPICA: Linux-specific header: Add support for PPC64 compilation.
Adds PPC64 as a 64-bit architecture. Colin Ian King.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the following commmit is back ported to ACPICA, comments have been
updated:
Subject: ACPICA: Linux-specific header: Update support for Linux/acpi
applications.
This patch back ports the differences between the ACPICA upstream and
Linux.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com>
[rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Update use of acpi_os_wait_events_complete interface.
This patch cleans up all of the acpi_os_wait_events_complete() invocations to
make it to be invoked inside of ACPICA in the way to accommodate Linux's
work queue implementation.
According to the report, current Linux kernel code is facing a boot time
race issue in the acpi_remove_notify_handler(). This is because:
Linux is using work queues to implement a deferred handler call environment
while ACPICA expects OSPM to implement acpi_os_wait_events_complete() using
wait queues. The position to invoke a "waiter" is not suitable for a
"flusher" as new invocations can be scheduled after this position and
before the deletion of the handler from its management container.
Since the following commit has deleted acpi_os_wait_events_complete()
parameters, it thus might not be possible for OSPM to achieve a safe
removal using wait queues. This requires ACPICA to be changed accordingly
to "flush" handlers rather than "wait" them to be drain up:
This interface will block until asynchronous events like notifies
and GPEs are complete. Within ACPICA, it is called before a notify or GPE
handler is removed. ACPICA BZ 868.
This patch fixes this issue by invoking acpi_os_wait_events_complete() in the
way to "flush" things - it thus should be put to the position after handler
is removed from its management container but before it is destructed.
The technical concerns are:
1. MTX_NAMESPACE is used to protect things that acpi_os_wait_events_complete()
might be waiting for, thus MTX_NAMESPACE must be unlocked before
invoking acpi_os_wait_events_complete().
2. MTX_NAMESPACE is also used to implement the serialization of
acpi_install_notify_handler() and acpi_remove_notify_handler(). This patch
changes this logic, thus if there are many
acpi_install/remove_notify_handler() invoked in parallel, the
acpi_os_wait_events_complete() might face the races which could cause it
never running to an end. Normally this will require additional code to
implement a separate locking facility which is not implemented due to 3.
3. Given ACPICA users will always invoke acpi_install_notify_handler() once
during Linux module/device initialization and invoke
acpi_remove_notify_handler() once during module/device finalization,
problem stated in 2 will not happen in Linux environment due to the
mutual exclusive module/device existence, this fix thus is sufficient.
Same concerns can apply to acpi_install/remove_gpe_handler(). Reported and
tested: Ronald Vink. Fixed: Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60583 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reported-and-Tested-by: Ronald Vink <ronald.vink@boskalis.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:37:44 +0000 (12:37 +0800)]
ACPICA: Disassembler: Add decoding of Notify() values.
For Notify operators, displays a comment that describe the meaning
of the notify value.
This patch updates the debugging information that is enabled for
CONFIG_ACPI_DEBUG builds.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:37:35 +0000 (12:37 +0800)]
ACPICA: Disassembler: Add support to decode _HID and _CID values.
For _HID and _CID, the disassembler will emit a string that describes
the device if the _HID/_CID value is recognized. acpihelp updated also.
acpihelp will now search for a specific ID as well as displaying
the list of "known" (to ACPICA) IDs.
This patch does not affect Linux kernel behavior as the disassembler
and the acpihelp are not shipped with it.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:37:26 +0000 (12:37 +0800)]
ACPICA: Unload operator: Emit a warning if and when it is ever used.
We would like to see the ASL for any machine that uses this operator,
so emit at least a warning to hopefully draw some attention.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:37:19 +0000 (12:37 +0800)]
ACPICA: gcc-specific: Fix possible issue with the strchr function.
Some versions of gcc implement strchr via a macro, which either
contains bugs or can provoke a bug in the compiler. This change
fixes a possible compile-time error when using this function.
The problem is usually seen when compiling the getopt.c module.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:37:11 +0000 (12:37 +0800)]
ACPICA: Update comments for ACPICA name - no functional change.
Change all comments that contain the string "ACPI CA" to "ACPICA"
so that the name is standard across the entire source base.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 4 Apr 2014 04:36:47 +0000 (12:36 +0800)]
ACPICA: Add EXPORT_SYMBOL macros for install/remove SCI handler interfaces.
These recently added interfaces did not have these macros, used
by some hosts.
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cifs: Use min_t() when comparing "size_t" and "unsigned long"
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the
following warning when comparing with PAGE_SIZE, which is always "unsigned
long":
fs/cifs/file.c: In function ‘cifs_readdata_to_iov’:
fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast
Introduced by commit 7f25bba819a3 ("cifs_iovec_read: keep iov_iter
between the calls of cifs_readdata_to_iov()"), which changed the
signedness of "remaining" and the code from min_t() to min().
Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull slab changes from Pekka Enberg:
"The biggest change is byte-sized freelist indices which reduces slab
freelist memory usage:
https://lkml.org/lkml/2013/12/2/64"
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
mm: slab/slub: use page->list consistently instead of page->lru
mm/slab.c: cleanup outdated comments and unify variables naming
slab: fix wrongly used macro
slub: fix high order page allocation problem with __GFP_NOFAIL
slab: Make allocations with GFP_ZERO slightly more efficient
slab: make more slab management structure off the slab
slab: introduce byte sized index for the freelist of a slab
slab: restrict the number of objects in a slab
slab: introduce helper functions to get/set free object
slab: factor out calculate nr objects in cache_estimate
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
"Here is the non-critical part of kbuild:
- One bogus coccinelle check removed, one check fixed not to suggest
the obsolete PTR_RET macro
- scripts/tags.sh does not index the generated *.mod.c files
- new objdiff tool to list differences between two versions of an
object file
- A fix for scripts/bootgraph.pl"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/coccinelle: Use PTR_ERR_OR_ZERO
scripts/bootgraph.pl: Add graphic header
scripts: objdiff: detect object code changes between two commits
Coccicheck: Remove memcpy to struct assignment test
scripts/tags.sh: Ignore *.mod.c
sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.
When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.
This function aborts them with DID_SOFT_ERROR.
If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.
The result is that disk returning QUEUE FULL causes request failures.
The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags. The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags. The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mackerras [Fri, 11 Apr 2014 06:43:35 +0000 (16:43 +1000)]
powerpc: Don't try to set LPCR unless we're in hypervisor mode
Commit 8f619b5429d9 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode. The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic. The visible result is that
the kernel hangs after printing "returning from prom_init".
This fixes it by checking for hypervisor mode being available before
setting LPCR. If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.
Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
futex: update documentation for ordering guarantees
Commits 11d4616bd07f ("futex: revert back to the explicit waiter
counting code") and 69cd9eba3886 ("futex: avoid race between requeue and
wake") changed some of the finer details of how we think about futexes.
One was a late fix and the other a consequence of overlooking the whole
requeuing logic.
The first change caused our documentation to be incorrect, and the
second made us aware that we need to explicitly add more details to it.
Pull yet more networking updates from David Miller:
1) Various fixes to the new Redpine Signals wireless driver, from
Fariya Fatima.
2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
Dmitry Petukhov.
3) UFO and TSO packets differ in whether they include the protocol
header in gso_size, account for that in skb_gso_transport_seglen().
From Florian Westphal.
4) If VLAN untagging fails, we double free the SKB in the bridging
output path. From Toshiaki Makita.
5) Several call sites of sk->sk_data_ready() were referencing an SKB
just added to the socket receive queue in order to calculate the
second argument via skb->len. This is dangerous because the moment
the skb is added to the receive queue it can be consumed in another
context and freed up.
It turns out also that none of the sk->sk_data_ready()
implementations even care about this second argument.
So just kill it off and thus fix all these use-after-free bugs as a
side effect.
6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.
7) pktgen needs to do locking properly for LLTX devices, from Daniel
Borkmann.
8) xen-netfront driver initializes TX array entries in RX loop :-) From
Vincenzo Maffione.
9) After refactoring, some tunnel drivers allow a tunnel to be
configured on top itself. Fix from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vti: don't allow to add the same tunnel twice
gre: don't allow to add the same tunnel twice
drivers: net: xen-netfront: fix array initialization bug
pktgen: be friendly to LLTX devices
r8152: check RTL8152_UNPLUG
net: sun4i-emac: add promiscuous support
net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
net: ipv6: Fix oif in TCP SYN+ACK route lookup.
drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
drivers: net: cpsw: discard all packets received when interface is down
net: Fix use after free by removing length arg from sk_data_ready callbacks.
Drivers: net: hyperv: Address UDP checksum issues
Drivers: net: hyperv: Negotiate suitable ndis version for offload support
Drivers: net: hyperv: Allocate memory for all possible per-pecket information
bridge: Fix double free and memory leak around br_allowed_ingress
bonding: Remove debug_fs files when module init fails
i40evf: program RSS LUT correctly
i40evf: remove open-coded skb_cow_head
ixgb: remove open-coded skb_cow_head
igbvf: remove open-coded skb_cow_head
...
Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc cleanups from Ohad Ben-Cohen:
"Several remoteproc cleanup patches coming from Jingoo Han, Julia
Lawall and Uwe Kleine-König"
* tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc/ste_modem: staticize local symbols
remoteproc/davinci: simplify use of devm_ioremap_resource
remoteproc/davinci: drop needless devm_clk_put
Merge tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel
Pull llvm patches from Behan Webster:
"These are some initial updates to support compiling the kernel with
clang.
These patches have been through the proper reviews to the best of my
ability, and have been soaking in linux-next for a few weeks. These
patches by themselves still do not completely allow clang to be used
with the kernel code, but lay the foundation for other patches which
are still under review.
Several other of the LLVMLinux patches have been already added via
maintainer trees"
* tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel:
x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id"
x86 kbuild: LLVMLinux: More cc-options added for clang
x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI
LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h
LLVMLinux: Remove warning about returning an uninitialized variable
kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang
Documentation: LLVMLinux: Update Documentation/dontdiff
kbuild: LLVMLinux: Adapt warnings for compilation with clang
kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"Here are the target pending updates for v3.15-rc1. Apologies in
advance for waiting until the second to last day of the merge window
to send these out.
The highlights this round include:
- iser-target support for T10 PI (DIF) offloads (Sagi + Or)
- Fix Task Aborted Status (TAS) handling in target-core (Alex Leung)
- Pass in transport supported PI at session initialization (Sagi + MKP + nab)
- Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi)
- Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab)
- Fix tcm_fc use-after-free of ft_tpg (Andy Grover)
- Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn)
Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI
metadata into KVM guest have been left-out for now, as there where a
few comments from MST + Paolo that where not able to be addressed in
time for v3.15. Please expect this feature for v3.16-rc1"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits)
ib_srpt: Use correct ib_sg_dma primitives
target/tcm_fc: Rename ft_tport_create to ft_tport_get
target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn
target/tcm_fc: Rename structs and list members for clarity
target/tcm_fc: Limit to 1 TPG per wwn
target/tcm_fc: Don't export ft_lport_list
target/tcm_fc: Fix use-after-free of ft_tpg
target: Add check to prevent Abort Task from aborting itself
target: Enable READ_STRIP emulation in target_complete_ok_work
target/sbc: Add sbc_dif_read_strip software emulation
target: Enable WRITE_INSERT emulation in target_execute_cmd
target/sbc: Add sbc_dif_generate software emulation
target/sbc: Only expose PI read_cap16 bits when supported by fabric
target/spc: Only expose PI mode page bits when supported by fabric
target/spc: Only expose PI inquiry bits when supported by fabric
target: Pass in transport supported PI at session initialization
target/iblock: Fix double bioset_integrity_free bug
Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist
target/rd: T10-Dif: RAM disk is allocating more space than required.
iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug
...
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of bug fix patches for v3.15-rc1. Most are just driver
fixes. There are some changes at remote controller core level, fixing
some definitions on a new API added for Kernel v3.15.
It also adds the missing include at include/uapi/linux/v4l2-common.h,
to allow its compilation on userspace, as pointed by you"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits)
[media] gpsca: remove the risk of a division by zero
[media] stk1160: warrant a NUL terminated string
[media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers
[media] v4l: ti-vpe: Set correct field parameter for output and capture buffers
[media] v4l: ti-vpe: zero out reserved fields in try_fmt
[media] v4l: ti-vpe: Fix initial configuration queue data
[media] v4l: ti-vpe: Use correct bus_info name for the device in querycap
[media] v4l: ti-vpe: report correct capabilities in querycap
[media] v4l: ti-vpe: Allow usage of smaller images
[media] v4l: ti-vpe: Use video_device_release_empty
[media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs
[media] lgdt3305: include sleep functionality in lgdt3304_ops
[media] drx-j: use customise option correctly
[media] m88rs2000: fix sparse static warnings
[media] r820t: fix size and init values
[media] rc-core: remove generic scancode filter
[media] rc-core: split dev->s_filter
[media] rc-core: do not change 32bit NEC scancode format for now
[media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03
[media] xc2028: add missing break to switch
...
Merge tag 'ntb-3.15' of git://github.com/jonmason/ntb
Pull PCIe non-transparent bridge fixes and features from Jon Mason:
"NTB driver bug fixes to address issues in list traversal, skb leak in
ntb_netdev, a typo, and a leak of msix entries in the error path.
Clean ups of the event handling logic, as well as a overall style
cleanup. Finally, the driver was converted to use the new
pci_enable_msix_range logic (and the refactoring to go along with it)"
* tag 'ntb-3.15' of git://github.com/jonmason/ntb:
ntb: Use pci_enable_msix_range() instead of pci_enable_msix()
ntb: Split ntb_setup_msix() into separate BWD/SNB routines
ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs
NTB: Code Style Clean-up
NTB: client event cleanup
ntb: Fix leakage of ntb_device::msix_entries[] array
NTB: Fix typo in setting one translation register
ntb_netdev: Fix skb free issue in open
ntb_netdev: Fix list_for_each_entry exit issue
In file included from fs/ceph/super.h:4:0,
from fs/ceph/ioctl.c:3:
include/linux/ceph/ceph_debug.h:4:0: warning: "pr_fmt" redefined [enabled by default]
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
^
In file included from include/linux/kernel.h:13:0,
from include/linux/uio.h:12,
from include/linux/socket.h:7,
from include/uapi/linux/in.h:22,
from include/linux/in.h:23,
from fs/ceph/ioctl.c:1:
include/linux/printk.h:214:0: note: this is the location of the previous definition
#define pr_fmt(fmt) fmt
^
where the reason is that <linux/ceph_debug.h> is included much too late
for the "pr_fmt()" define.
The include of <linux/ceph_debug.h> needs to be the first include in the
file, but fs/ceph/ioctl.c had for some reason missed that, and it wasn't
noticeable until some unrelated header file changes brought in an
indirect earlier include of <linux/kernel.h>.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
David S. Miller [Sat, 12 Apr 2014 21:03:20 +0000 (17:03 -0400)]
Merge branch 'tunnels'
Nicolas Dichtel says:
====================
tunnels: don't allow to add the same tunnel twice
This series fixes the check of an existing tunnel with the same
parameters when a new tunnel is added. I've checked all users of
ip_tunnel_newlink(): gre, gretap, ipip and vti. The bug exists only
for gre and vti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Fri, 11 Apr 2014 13:51:19 +0000 (15:51 +0200)]
vti: don't allow to add the same tunnel twice
Before the patch, it was possible to add two times the same tunnel:
ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41
ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41
It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the
argument dev->type, which was set only later (when calling ndo_init handler
in register_netdevice()). Let's set this type in the setup handler, which is
called before newlink handler.
Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code").
CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Fri, 11 Apr 2014 13:51:18 +0000 (15:51 +0200)]
gre: don't allow to add the same tunnel twice
Before the patch, it was possible to add two times the same tunnel:
ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249
ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249
It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the
argument dev->type, which was set only later (when calling ndo_init handler
in register_netdevice()). Let's set this type in the setup handler, which is
called before newlink handler.
Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code.").
CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the initialization of an array used in the TX
datapath that was mistakenly initialized together with the
RX datapath arrays. An out of range array access could happen
when RX and TX rings had different sizes.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 12 Apr 2014 20:36:44 +0000 (16:36 -0400)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates
This series contains updates to e1000, e1000e, igb, igbvf, ixgb, ixgbe,
ixgbevf and i40evf.
Mark fixes an issue with ixgbe and ixgbevf by adding a bit to indicate
when workqueues have been initialized. This permits the register read
error handling from attempting to use them prior to that, which also
generates warnings. Checking for a detected removal after initializing
the work queues allows the probe function to return an error without
getting the workqueue involved. Further, if the error_detected
callback is entered before the workqueues are initialized, exit without
recovery since the device initialization was so truncated.
Francois Romieu provides several patches to all the drivers to remove
the open coded skb_cow_head.
Jakub Kicinski provides a fix for igb where last_rx_timestamp should be
updated only when Rx time stamp is read.
Mitch provides a fix for i40evf where a recent change broke the RSS LUT
programming causing it to be programmed with all 0's.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"This includes the final patch to clean up and fix the issue with the
design of tracepoints and how a user could register a tracepoint and
have that tracepoint not be activated but no error was shown.
The design was for an out of tree module but broke in tree users. The
clean up was to remove the saving of the hash table of tracepoint
names such that they can be enabled before they exist (enabling a
module tracepoint before that module is loaded). This added more
complexity than needed. The clean up was to remove that code and just
enable tracepoints that exist or fail if they do not.
This removed a lot of code as well as the complexity that it brought.
As a side effect, instead of registering a tracepoint by its name, the
tracepoint needs to be registered with the tracepoint descriptor.
This removes having to duplicate the tracepoint names that are
enabled.
The second patch was added that simplified the way modules were
searched for.
This cleanup required changes that were in the 3.15 queue as well as
some changes that were added late in the 3.14-rc cycle. This final
change waited till the two were merged in upstream and then the change
was added and full tests were run. Unfortunately, the test found some
errors, but after it was already submitted to the for-next branch and
not to be rebased. Sparse errors were detected by Fengguang Wu's bot
tests, and my internal tests discovered that the anonymous union
initialization triggered a bug in older gcc compilers. Luckily, there
was a bugzilla for the gcc bug which gave a work around to the
problem. The third and fourth patch handled the sparse error and the
gcc bug respectively.
A final patch was tagged along to fix a missing documentation for the
README file"
* tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add missing function triggers dump and cpudump to README
tracing: Fix anonymous unions in struct ftrace_event_call
tracepoint: Fix sparse warnings in tracepoint.c
tracepoint: Simplify tracepoint module search
tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
Al Viro [Thu, 3 Apr 2014 14:27:17 +0000 (10:27 -0400)]
cifs: fix the race in cifs_writev()
O_APPEND handling there hadn't been completely fixed by Pavel's
patch; it checks the right value, but it's racy - we can't really
do that until i_mutex has been taken.
Fix by switching to __generic_file_aio_write() (open-coding
generic_file_aio_write(), actually) and pulling mutex_lock() above
inode_size_read().
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Daniel Borkmann [Fri, 11 Apr 2014 11:22:00 +0000 (13:22 +0200)]
pktgen: be friendly to LLTX devices
Similarly to commit 43279500deca ("packet: respect devices with
LLTX flag in direct xmit"), we can basically apply the very same
to pktgen. This will help testing against LLTX devices such as
dummy driver (or others), which only have a single netdevice txq
and would otherwise require locking their txq from pktgen side
while e.g. in dummy case, we would not need any locking. Fix this
by making use of HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will
be respected.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When the device is unplugged, the driver would try to disable the
device. Add checking the flag of RTL8152_UNPLUG to skip setting
the device when it is unplugged. This could shorten the time of
unloading the driver.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Zyngier [Fri, 11 Apr 2014 09:46:17 +0000 (10:46 +0100)]
net: sun4i-emac: add promiscuous support
The sun4i-emac driver is rather primitive, and doesn't support
promiscuous mode. This makes usage such as bridging impossible,
which is a shame on virtualization capable HW such as the
Allwinner A20.
The fix is fairly simple: move the RX setup code to the ndo_set_rx_mode
vector, and add the required HW configuration when IFF_PROMISC is passed
by the core code.
This has been tested on a generic A20 box running a few virtual
machines hanging off a bridge with the EMAC chip as the link to the
outside world.
Cc: Stefan Roese <sr@denx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Bolle [Thu, 4 Apr 2013 10:31:06 +0000 (12:31 +0200)]
Blackfin: bf537: rename "CONFIG_ADT75"
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed
as an IIO driver and support for it was added to the LM75 HWMON driver.
But it was apparently overlooked to rename one reference to CONFIG_ADT75
to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Paul Bolle [Thu, 4 Apr 2013 10:08:25 +0000 (12:08 +0200)]
Blackfin: bf537: rename "CONFIG_AD7314"
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed
as an IIO driver and added as a HWMON driver. But it was apparently
overlooked to rename two references to CONFIG_AD7314 to
CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Paul Bolle [Thu, 4 Apr 2013 11:02:10 +0000 (13:02 +0200)]
Blackfin: bf537: rename ad2s120x ->ad2s1200
In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from
ad2s120x to ad2s1200. But it apparently forgot to rename the references
to this driver in the BF537-STAMP code. Rename these now, and use the
IS_ENABLED() macro, while we're at it.
There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it
once and for all by using IS_ENABLED(), which is designed to avoid
issues like this.
Pull md updates from Neil Brown:
"Just a few md patches for the 3.15 merge window.
Not much happening in md/raid at the moment. Just a few bug fixes
(one for -stable) and a couple of performance tweaks"
* tag 'md/3.15' of git://neil.brown.name/md:
raid5: get_active_stripe avoids device_lock
raid5: make_request does less prepare wait
md: avoid oops on unload if some process is in poll or select.
md/raid1: r1buf_pool_alloc: free allocate pages when subsequent allocation fails.
md/bitmap: don't abuse i_writecount for bitmap files.
Pull NVMe driver updates from Matthew Wilcox:
"Various updates to the NVMe driver. The most user-visible change is
that drive hotplugging now works and CPU hotplug while an NVMe drive
is installed should also work better"
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Retry failed commands with non-fatal errors
NVMe: Add getgeo to block ops
NVMe: Start-stop nvme_thread during device add-remove.
NVMe: Make I/O timeout a module parameter
NVMe: CPU hot plug notification
NVMe: per-cpu io queues
NVMe: Replace DEFINE_PCI_DEVICE_TABLE
NVMe: Fix divide-by-zero in nvme_trans_io_get_num_cmds
NVMe: IOCTL path RCU protect queue access
NVMe: RCU protected access to io queues
NVMe: Initialize device reference count earlier
NVMe: Add CONFIG_PM_SLEEP to suspend/resume functions
Andy Grover [Fri, 4 Apr 2014 23:54:13 +0000 (16:54 -0700)]
target/tcm_fc: Rename structs and list members for clarity
Rename struct ft_lport_acl to ft_lport_wwn. "acl" is associated with
something different in LIO terms. Really, ft_lport_wwn is the
fabric-specific wrapper for the struct se_wwn.
Rename "lacl" local variables to "ft_wwn" as well.
Rename list_heads used as list members to make it clear they're nodes, not
heads.
Rename lport_node to ft_wwn_node.
Rename ft_lport_list to ft_wwn_list
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Fri, 4 Apr 2014 23:44:37 +0000 (16:44 -0700)]
target/tcm_fc: Fix use-after-free of ft_tpg
ft_del_tpg checks tpg->tport is set before unlinking the tpg from the
tport when the tpg is being removed. Set this pointer in ft_tport_create,
or the unlinking won't happen in ft_del_tpg and tport->tpg will reference
a deleted object.
This patch sets tpg->tport in ft_tport_create, because that's what
ft_del_tpg checks, and is the only way to get back to the tport to
clear tport->tpg.
The bug was occuring when:
- lport created, tport (our per-lport, per-provider context) is
allocated.
tport->tpg = NULL
- tpg created
- a PRLI is received. ft_tport_create is called, tpg is found and
tport->tpg is set
- tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not
set, tport->tpg is not cleared and points at freed memory
- Future calls to ft_tport_create return tport via first conditional,
instead of searching for new tpg by calling ft_lport_find_tpg.
tport->tpg is still invalid, and will access freed memory.
see https://bugzilla.redhat.com/show_bug.cgi?id=1071340
Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Alex Leung [Fri, 4 Apr 2014 04:38:19 +0000 (04:38 +0000)]
target: Add check to prevent Abort Task from aborting itself
This patch addresses an issue that occurs when an ABTS is received
for an se_cmd that completes just before the sess_cmd_list is searched
in core_tmr_abort_task(). When the sess_cmd_list is searched, since
the ABTS and the FCP_CMND being aborted (that just completed) both
have the same OXID, TFO->get_task_tag(TMR) returns a value that
matches tmr->ref_task_tag (from TFO->get_task_tag(FCP_CMND)), and
the Abort Task tries to abort itself. When this occurs,
transport_wait_for_tasks() hangs forever since the TMR is waiting
for itself to finish.
This patch adds a check to core_tmr_abort_task() to make sure the
TMR does not attempt to abort itself.
Signed-off-by: Alex Leung <alex.leung@emulex.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull second set of btrfs updates from Chris Mason:
"The most important changes here are from Josef, fixing a btrfs
regression in 3.14 that can cause corruptions in the extent allocation
tree when snapshots are in use.
Josef also fixed some deadlocks in send/recv and other assorted races
when balance is running"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (23 commits)
Btrfs: fix compile warnings on on avr32 platform
btrfs: allow mounting btrfs subvolumes with different ro/rw options
btrfs: export global block reserve size as space_info
btrfs: fix crash in remount(thread_pool=) case
Btrfs: abort the transaction when we don't find our extent ref
Btrfs: fix EINVAL checks in btrfs_clone
Btrfs: fix unlock in __start_delalloc_inodes()
Btrfs: scrub raid56 stripes in the right way
Btrfs: don't compress for a small write
Btrfs: more efficient io tree navigation on wait_extent_bit
Btrfs: send, build path string only once in send_hole
btrfs: filter invalid arg for btrfs resize
Btrfs: send, fix data corruption due to incorrect hole detection
Btrfs: kmalloc() doesn't return an ERR_PTR
Btrfs: fix snapshot vs nocow writting
btrfs: Change the expanding write sequence to fix snapshot related bug.
btrfs: make device scan less noisy
btrfs: fix lockdep warning with reclaim lock inversion
Btrfs: hold the commit_root_sem when getting the commit root during send
Btrfs: remove transaction from send
...
Merge tag 'for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p changes from Eric Van Hensbergen:
"A bunch of updates and cleanup within the transport layer,
particularly with a focus on RDMA"
* tag 'for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9pnet_rdma: check token type before int conversion
9pnet: trans_fd : allocate struct p9_trans_fd and struct p9_conn together.
9pnet: p9_client->conn field is unused. Remove it.
9P: Get rid of REQ_STATUS_FLSH
9pnet_rdma: add cancelled()
9pnet_rdma: update request status during send
9P: Add cancelled() to the transport functions.
net: Mark function as static in 9p/client.c
9P: Add memory barriers to protect request fields over cb/rpc threads handoff
Lorenzo Colitti [Fri, 11 Apr 2014 04:19:12 +0000 (13:19 +0900)]
net: ipv6: Fix oif in TCP SYN+ACK route lookup.
net-next commit 9c76a11, ipv6: tcp_ipv6 policy route issue, had
a boolean logic error that caused incorrect behaviour for TCP
SYN+ACK when oif-based rules are in use. Specifically:
1. If a SYN comes in from a global address, and sk_bound_dev_if
is not set, the routing lookup has oif set to the interface
the SYN came in on. Instead, it should have oif unset,
because for global addresses, the incoming interface doesn't
necessarily have any bearing on the interface the SYN+ACK is
sent out on.
2. If a SYN comes in from a link-local address, and
sk_bound_dev_if is set, the routing lookup has oif set to the
interface the SYN came in on. Instead, it should have oif set
to sk_bound_dev_if, because that's what the application
requested.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'spi-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, the main one being the fix for handling
of complete callbacks that are open coded in individual drivers to
allow callers to omit the completion. As we move things into the core
that sort of issue should become less and less common"
* tag 'spi-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: qup: Depend on ARCH_QCOM
spi: efm32: Update binding document to make "efm32,location" property optional
spi: omap2-mcspi: Convert to use devm_kcalloc
spi: Always check complete callback before calling it
Merge tag 'regulator-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes that have come in over the merge window,
all only relevant for the specific driver"
* tag 'regulator-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bcm590xx: Set n_voltages for linear reg
regulator: s5m8767: Fix carried over ena_gpio assignment
regulator: s2mps11: Don't check enable_shift before setting enable ramp rate
regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate
Mugunthan V N [Thu, 10 Apr 2014 08:53:24 +0000 (14:23 +0530)]
drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
When the Ethernet interface is put down and up with heavy Ethernet
traffic, then there is prossibility of an interrupt waiting in irq
controller to be processed, so when the interface is brought up again
just after enable interrupt, it goes to ISR due to the previous
unhandled interrutp and in ISR napi is not scheduled as the napi
is not enabled in ndo_open which results in disabled interrupt for
CPSW and no packets are received in cpsw. So this patch moves enabling
of interupts after napi_enable and clearing CPDMA interrupts.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Thu, 10 Apr 2014 08:53:23 +0000 (14:23 +0530)]
drivers: net: cpsw: discard all packets received when interface is down
When the Ethernet interface is brought down during high Ethernet traffic,
then cpsw creates the following warn dump. When cpdma has already processed
the packet then the status will be greater than 0, so the cpsw_rx_handler
considers that the interface is up and try to resubmit one more rx buffer
to cpdma which fails as the DMA is in teardown process. This can be avoided
by checking the interface state and then process the received packet, if the
interface is down just discard and free the skb and return.
[ 2823.104591] WARNING: CPU: 0 PID: 1823 at drivers/net/ethernet/ti/cpsw.c:711 cpsw_rx_handler+0x148/0x164()
[ 2823.114654] Modules linked in:
[ 2823.117872] CPU: 0 PID: 1823 Comm: ifconfig Tainted: G W 3.14.0-11992-gf34c4a3 #11
[ 2823.126860] [<c0014b5c>] (unwind_backtrace) from [<c00117e4>] (show_stack+0x10/0x14)
[ 2823.135030] [<c00117e4>] (show_stack) from [<c0533a9c>] (dump_stack+0x80/0x9c)
[ 2823.142619] [<c0533a9c>] (dump_stack) from [<c003f0e0>] (warn_slowpath_common+0x6c/0x90)
[ 2823.151141] [<c003f0e0>] (warn_slowpath_common) from [<c003f120>] (warn_slowpath_null+0x1c/0x24)
[ 2823.160336] [<c003f120>] (warn_slowpath_null) from [<c03caeb0>] (cpsw_rx_handler+0x148/0x164)
[ 2823.169314] [<c03caeb0>] (cpsw_rx_handler) from [<c03c730c>] (__cpdma_chan_free+0x90/0xa8)
[ 2823.178028] [<c03c730c>] (__cpdma_chan_free) from [<c03c7418>] (__cpdma_chan_process+0xf4/0x134)
[ 2823.187279] [<c03c7418>] (__cpdma_chan_process) from [<c03c7560>] (cpdma_chan_stop+0xb4/0x17c)
[ 2823.196349] [<c03c7560>] (cpdma_chan_stop) from [<c03c766c>] (cpdma_ctlr_stop+0x44/0x9c)
[ 2823.204872] [<c03c766c>] (cpdma_ctlr_stop) from [<c03cb708>] (cpsw_ndo_stop+0x154/0x188)
[ 2823.213321] [<c03cb708>] (cpsw_ndo_stop) from [<c046f0ec>] (__dev_close_many+0x84/0xc8)
[ 2823.221761] [<c046f0ec>] (__dev_close_many) from [<c046f158>] (__dev_close+0x28/0x3c)
[ 2823.230012] [<c046f158>] (__dev_close) from [<c0474ca8>] (__dev_change_flags+0x88/0x160)
[ 2823.238483] [<c0474ca8>] (__dev_change_flags) from [<c0474da0>] (dev_change_flags+0x18/0x48)
[ 2823.247316] [<c0474da0>] (dev_change_flags) from [<c04d12c4>] (devinet_ioctl+0x61c/0x6e0)
[ 2823.255884] [<c04d12c4>] (devinet_ioctl) from [<c045c660>] (sock_ioctl+0x68/0x2a4)
[ 2823.263789] [<c045c660>] (sock_ioctl) from [<c0125fe4>] (do_vfs_ioctl+0x78/0x61c)
[ 2823.271629] [<c0125fe4>] (do_vfs_ioctl) from [<c01265ec>] (SyS_ioctl+0x64/0x74)
[ 2823.279284] [<c01265ec>] (SyS_ioctl) from [<c000e580>] (ret_fast_syscall+0x0/0x48)
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management fixes and updates from Rafael Wysocki:
"This is PM and ACPI material that has emerged over the last two weeks
and one fix for a CPU hotplug regression introduced by the recent CPU
hotplug notifiers registration series.
Included are intel_idle and turbostat updates from Len Brown (these
have been in linux-next for quite some time), a new cpufreq driver for
powernv (that might spend some more time in linux-next, but BenH was
asking me so nicely to push it for 3.15 that I couldn't resist), some
cpufreq fixes and cleanups (including fixes for some silly breakage in
a couple of cpufreq drivers introduced during the 3.14 cycle),
assorted ACPI cleanups, wakeup framework documentation fixes, a new
sysfs attribute for cpuidle and a new command line argument for power
domains diagnostics.
Specifics:
- Fix for a recently introduced CPU hotplug regression in ARM KVM
from Ming Lei.
- Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32
cpufreq drivers introduced during the 3.14 cycle (-stable material)
from Chen Gang and Viresh Kumar.
- New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits
from Gautham R Shenoy and Srivatsa S Bhat.
- Exynos cpufreq driver fix preventing it from being included into
multiplatform builds that aren't supported by it from Sachin Kamat.
- cpufreq cleanups related to the usage of the driver_data field in
struct cpufreq_frequency_table from Viresh Kumar.
- cpufreq ppc driver cleanup from Sachin Kamat.
- Intel BayTrail support for intel_idle and ACPI idle from Len Brown.
- Intel CPU model 54 (Atom N2000 series) support for intel_idle from
Jan Kiszka.
- intel_idle fix for Intel Ivy Town residency targets from Len Brown.
- turbostat updates (Intel Broadwell support and output cleanups)
from Len Brown.
- New cpuidle sysfs attribute for exporting C-states' target
residency information to user space from Daniel Lezcano.
- New kernel command line argument to prevent power domains enabled
by the bootloader from being turned off even if they are not in use
(for diagnostics purposes) from Tushar Behera.
- Fixes for wakeup sysfs attributes documentation from Geert
Uytterhoeven.
- New ACPI video blacklist entry for ThinkPad Helix from Stephen
Chandler Paul.
- Assorted ACPI cleanups and a Kconfig help update from Jonghwan
Choi, Zhihui Zhang, Hanjun Guo"
* tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
ACPI: Update the ACPI spec information in Kconfig
arm, kvm: fix double lock on cpu_add_remove_lock
cpuidle: sysfs: Export target residency information
cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h
cpufreq: create another field .flags in cpufreq_frequency_table
cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table
cpufreq: don't print value of .driver_data from core
cpufreq: ia64: don't set .driver_data to index
cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids
cpufreq: powernv: cpufreq driver for powernv platform
cpufreq: at32ap: don't declare local variable as static
cpufreq: loongson2_cpufreq: don't declare local variable as static
cpufreq: unicore32: fix typo issue for 'clk'
cpufreq: exynos: Disable on multiplatform build
PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes
PM / domains: Add pd_ignore_unused to keep power domains enabled
ACPI / dock: Drop dock_device_ids[] table
ACPI / video: Favor native backlight interface for ThinkPad Helix
ACPI / thermal: Fix wrong variable usage in debug statement
...
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 11 Apr 2014 19:15:22 +0000 (15:15 -0400)]
Merge branch 'hyperv'
K. Y. Srinivasan says:
====================
Fix issues with Heper-V network offload code
WS2008 R2 does not support udp checksum offload. Furthermore, ws2012 and
ws2012 r2 have issues offloading udp checksum from Linux guests.
This patch-set addresses these issues as well as other bug fixes.
Please apply.
In this version, I have addressed the comment from David Miller with reagards
to COWing the skb prior to modifying the header (patch 3/3).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
KY Srinivasan [Wed, 9 Apr 2014 22:00:47 +0000 (15:00 -0700)]
Drivers: net: hyperv: Address UDP checksum issues
ws2008r2 does not support UDP checksum offload. Thus, we cannnot turn on
UDP offload in the host. Also, on ws2012 and ws2012 r2, there appear to be
an issue with UDP checksum offload.
Fix this issue by computing the UDP checksum in the Hyper-V driver.
Based on Dave Miller's comments, in this version, I have COWed the skb
before modifying the UDP header (the checksum field).
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
KY Srinivasan [Wed, 9 Apr 2014 22:00:46 +0000 (15:00 -0700)]
Drivers: net: hyperv: Negotiate suitable ndis version for offload support
Ws2008R2 supports ndis_version 6.1 and 6.1 is the minimal version required
for various offloads. Negotiate ndis_version 6.1 when on ws2008r2.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
KY Srinivasan [Wed, 9 Apr 2014 22:00:45 +0000 (15:00 -0700)]
Drivers: net: hyperv: Allocate memory for all possible per-pecket information
An outgoing packet can potentially need per-packet information for
all the offloads and VLAN tagging. Fix this issue.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: Fix double free and memory leak around br_allowed_ingress
br_allowed_ingress() has two problems.
1. If br_allowed_ingress() is called by br_handle_frame_finish() and
vlan_untag() in br_allowed_ingress() fails, skb will be freed by both
vlan_untag() and br_handle_frame_finish().
2. If br_allowed_ingress() is called by br_dev_xmit() and
br_allowed_ingress() fails, the skb will not be freed.
Fix these two problems by freeing the skb in br_allowed_ingress()
if it fails.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter [Wed, 9 Apr 2014 10:52:59 +0000 (12:52 +0200)]
bonding: Remove debug_fs files when module init fails
Remove the bonding debug_fs entries when the
module initialization fails. The debug_fs
entries should be removed together with all other
already allocated resources.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pullx86 core platform updates from Peter Anvin:
"This is the x86/platform branch with the objectionable IOSF patches
removed.
What is left is proper memory handling for Intel GPUs, and a change to
the Calgary IOMMU code which will be required to make kexec work
sanely on those platforms after some upcoming kexec changes"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, calgary: Use 8M TCE table size by default
x86/gpu: Print the Intel graphics stolen memory range
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms
x86/gpu: Add vfunc for Intel graphics stolen memory base address
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a collection of minor fixes for x86, plus the IRET information
leak fix (forbid the use of 16-bit segments in 64-bit mode)"
NOTE! We may have to relax the "forbid the use of 16-bit segments in
64-bit mode" part, since there may be people who still run and depend on
16-bit Windows binaries under Wine.
But I'm taking this in the current unconditional form for now to see who
(if anybody) screams bloody murder. Maybe nobody cares. And maybe
we'll have to update it with some kind of runtime enablement (like our
vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already
need to tweak).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
efi: Pass correct file handle to efi_file_{read,close}
x86/efi: Correct EFI boot stub use of code32_start
x86/efi: Fix boot failure with EFI stub
x86/platform/hyperv: Handle VMBUS driver being a module
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
x86, CMCI: Add proper detection of end of CMCI storms
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull second set of ARM changes from Russell King:
"This is the remainder of the ARM changes for this merge window.
Included in this request are:
- fixes for kprobes for big-endian support
- fix tracing in soft_restart
- avoid phys address overflow in kdump code
- fix reporting of read-only pmd bits in kernel page table dump
- remove unnecessary (and possibly buggy) call to outer_flush_all()
- fix a three sparse warnings (missing header file for function
prototypes)
- fix pj4 crashing single zImage (thanks to arm-soc merging changes
which enables this with knowledge that the corresponding fix had
not even been submitted for my tree before the merge window opened)
- vfp macro cleanups
- dump register state on undefined instruction userspace faults when
debugging"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
Dump the registers on undefined instruction userspace faults
ARM: 8018/1: Add {inc,dec}_preempt_count asm macros
ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h
ARM: 8016/1: Check cpu id in pj4_cp0_init.
ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7
ARM: add missing system_misc.h include to process.c
ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
ARM: 8014/1: mm: fix reporting of read-only PMD bits
ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr
ARM: 8010/1: avoid tracers in soft_restart
ARM: kprobes-test: Workaround GAS .align bug
ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building
ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building
ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses
ARM: probes: fix instruction fetch order with <asm/opcodes.h>
Merge tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze updates from Michal Simek:
- use asm-generic/io.h and fix intc/timer code
- clean platform handling
- enable some syscalls
* tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use asm-generic/io.h
microblaze: Remove platform folder
microblaze: Remove generic platform
microblaze: Sort Kconfig options
microblaze: Move DTS file to common location at boot/dts folder
microblaze: Fix compilation failure because of release_thread
microblaze: Fix sparse warning because of missing cpu.h header
microblaze: Make timer driver endian aware
microblaze: Make intc driver endian aware
microblaze: Wire-up new system calls sched_setattr/getattr
microblaze: Wire-up preadv/pwritev in syscall table
microblaze: Enable pselect6 syscall
microblaze: Drop architecture-specific declaration of early_printk
microblaze: Rename global function heartbeat()
H. Peter Anvin [Sun, 16 Mar 2014 22:31:54 +0000 (15:31 -0700)]
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer. We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.
Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.
Paul Bolle [Thu, 21 Mar 2013 20:50:06 +0000 (21:50 +0100)]
Blackfin: remove "config IP_CHECKSUM_L1"
The only user of Kconfig symbol IP_CHECKSUM_L1 got removed in v2.6.33,
with commit ddf9ddacef0989fdeb22e182212a232488f0f3ad ("Blackfin: convert
to generic checksum code"). We can remove the Kconfig entry for this
unused symbol now.
projects / mirror_ubuntu-eoan-kernel.git / log