netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
NF_REPEAT places the packet at the beginning of the iptables chain
instead of accepting or rejecting it right away. The packet however will
reach the end of the chain and continue to the end of iptables
eventually, so it needs the same handling as NF_ACCEPT and NF_DROP.
Fixes: 368982cd7d1b ("netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracks") Signed-off-by: Michal 'vorner' Vaner <michal.vaner@avast.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
Compiler did not catch incorrect typing in the rcu hook assignment.
% nfct add timeout test-tcp inet tcp established 100 close 10 close_wait 10
% iptables -I OUTPUT -t raw -p tcp -j CT --timeout test-tcp
dmesg - xt_CT: Timeout policy `test-tcp' can only be used by L3 protocol number 25000
The CT target bails out with incorrect layer 3 protocol number.
Fixes: 6c1fd7dc489d ("netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object") Reported-by: Harsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
Now that cttimeout support for nft_ct is in place, these should depend
on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the
policy if this option is not enabled.
Florian Westphal [Fri, 24 Aug 2018 21:22:08 +0000 (23:22 +0200)]
netfilter: conntrack: reset tcp maxwin on re-register
Doug Smythies says:
Sometimes it is desirable to temporarily disable, or clear,
the iptables rule set on a computer being controlled via a
secure shell session (SSH). While unwise on an internet facing
computer, I also do it often on non-internet accessible computers
while testing. Recently, this has become problematic, with the
SSH session being dropped upon re-load of the rule set.
The problem is that when all rules are deleted, conntrack hooks get
unregistered.
In case the rules are re-added later, its possible that tcp window
has moved far enough so that all packets are considered invalid (out of
window) until entry expires (which can take forever, default
established timeout is 5 days).
Fix this by clearing maxwin of existing tcp connections on register.
Florian Westphal [Fri, 24 Aug 2018 06:43:36 +0000 (08:43 +0200)]
netfilter: nf_tables: rework ct timeout set support
Using a private template is problematic:
1. We can't assign both a zone and a timeout policy
(zone assigns a conntrack template, so we hit problem 1)
2. Using a template needs to take care of ct refcount, else we'll
eventually free the private template due to ->use underflow.
This patch reworks template policy to instead work with existing conntrack.
As long as such conntrack has not yet been placed into the hash table
(unconfirmed) we can still add the timeout extension.
The only caveat is that we now need to update/correct ct->timeout to
reflect the initial/new state, otherwise the conntrack entry retains the
default 'new' timeout.
Side effect of this change is that setting the policy must
now occur from chains that are evaluated *after* the conntrack lookup
has taken place.
No released kernel contains the timeout policy feature yet, so this change
should be ok.
Changes since v2:
- don't handle 'ct is confirmed case'
- after previous patch, no need to special-case tcp/dccp/sctp timeout
anymore
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Fri, 24 Aug 2018 06:43:35 +0000 (08:43 +0200)]
netfilter: conntrack: place 'new' timeout in first location too
tcp, sctp and dccp trackers re-use the userspace ctnetlink states
to index their timeout arrays, which means timeout[0] is never
used. Copy the 'new' state (syn-sent, dccp-request, ..) to 0 as well
so external users can simply read it off timeouts[0] without need to
differentiate dccp/sctp/tcp and udp/icmp/gre/generic.
The alternative is to map all array accesses to 'i - 1', but that
is a much more intrusive change.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Wed, 22 Aug 2018 09:33:27 +0000 (11:33 +0200)]
netfilter: xt_checksum: ignore gso skbs
Satish Patel reports a skb_warn_bad_offload() splat caused
by -j CHECKSUM rules:
-A POSTROUTING -p tcp -m tcp --sport 80 -j CHECKSUM
The CHECKSUM target has never worked with GSO skbs, and the above rule
makes no sense as kernel will handle checksum updates on transmit.
Unfortunately, there are 3rd party tools that install such rules, so we
cannot reject this from the config plane without potential breakage.
Amend Kconfig text to clarify that the CHECKSUM target is only useful
in virtualized environments, where old dhcp clients that use AF_PACKET
used to discard UDP packets with a 'bad' header checksum and add a
one-time warning in case such rule isn't restricted to UDP.
v2: check IP6T_F_PROTO flag before cmp (Michal Kubecek)
Reported-by: Satish Patel <satish.txt@gmail.com> Reported-by: Markos Chandras <markos.chandras@suse.com> Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Martin Willi [Wed, 22 Aug 2018 08:27:17 +0000 (10:27 +0200)]
netfilter: xt_cluster: add dependency on conntrack module
The cluster match requires conntrack for matching packets. If the
netns does not have conntrack hooks registered, the match does not
work at all.
Implicitly load the conntrack hook for the family, exactly as many
other extensions do. This ensures that the match works even if the
hooks have not been registered by other means.
Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Huazhong Tan [Thu, 23 Aug 2018 03:37:16 +0000 (11:37 +0800)]
net: hns3: modify variable type in hns3_nic_reuse_page
'truesize' is supposed to be u32, not int, so fix it.
Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 23 Aug 2018 03:37:15 +0000 (11:37 +0800)]
net: hns3: fix page_offset overflow when CONFIG_ARM64_64K_PAGES
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of
PAGE_SIZE is 65536(64K). But the type of page_offset is u16, it will
overflow. So change it to u32, when "CONFIG_ARM64_64K_PAGES" enabled.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 23 Aug 2018 03:31:37 +0000 (11:31 +0800)]
net/ipv6: init ip6 anycast rt->dst.input as ip6_input
Commit 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path")
forgot to handle anycast route and init anycast rt->dst.input to ip6_forward.
Fix it by setting anycast rt->dst.input back to ip6_input.
Fixes: 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 23 Aug 2018 03:10:13 +0000 (11:10 +0800)]
net: hns: use eth_get_headlen interface instead of hns_nic_get_headlen
Update hns to drop the hns_nic_get_headlen function in favour of
eth_get_headlen, and hence also removes now redundant hns_nic_get_headlen.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 23 Aug 2018 03:10:12 +0000 (11:10 +0800)]
net: hns: fix skb->truesize underestimation
skb->truesize is not meant to be tracking amount of used bytes in a skb,
but amount of reserved/consumed bytes in memory.
For instance, if we use a single byte in last page fragment, we have to
account the full size of the fragment.
So skb_add_rx_frag needs to calculate the length of the entire buffer into
turesize.
Fixes: 9cbe9fd5214e ("net: hns: optimize XGE capability by reducing cpu usage") Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 23 Aug 2018 03:10:11 +0000 (11:10 +0800)]
net: hns: modify variable type in hns_nic_reuse_page
'truesize' is supposed to be u32, not int, so fix it.
Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 23 Aug 2018 03:10:10 +0000 (11:10 +0800)]
net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length and page_offset are u16, they will
overflow. So change them to u32.
Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Aug 2018 04:45:32 +0000 (21:45 -0700)]
Merge branch 'tcp_bbr-PROBE_RTT-minor-bug-fixes'
Kevin Yang says:
====================
tcp_bbr: PROBE_RTT minor bug fixes
This series includes two minor bug fixes for the TCP BBR PROBE_RTT
mechanism, and one preparatory patch:
(1) A preparatory patch to reorganize the PROBE_RTT logic by refactoring
(into its own function) the code to exit PROBE_RTT, since the next
patch will be using that code in a new context.
(2) Fix: When BBR restarts from idle and if BBR is in PROBE_RTT mode,
BBR should check if it's time to exit PROBE_RTT. If yes, then BBR
should exit PROBE_RTT mode and restore the cwnd to its full value.
(3) Fix: Apply the PROBE_RTT cwnd cap even if the count of fully-ACKed
packets is 0.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Yang [Wed, 22 Aug 2018 21:43:16 +0000 (17:43 -0400)]
tcp_bbr: apply PROBE_RTT cwnd cap even if acked==0
This commit fixes a corner case where TCP BBR would enter PROBE_RTT
mode but not reduce its cwnd. If a TCP receiver ACKed less than one
full segment, the number of delivered/acked packets was 0, so that
bbr_set_cwnd() would short-circuit and exit early, without cutting
cwnd to the value we want for PROBE_RTT.
The fix is to instead make sure that even when 0 full packets are
ACKed, we do apply all the appropriate caps, including the cap that
applies in PROBE_RTT mode.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Yang [Wed, 22 Aug 2018 21:43:15 +0000 (17:43 -0400)]
tcp_bbr: in restart from idle, see if we should exit PROBE_RTT
This patch fix the case where BBR does not exit PROBE_RTT mode when
it restarts from idle. When BBR restarts from idle and if BBR is in
PROBE_RTT mode, BBR should check if it's time to exit PROBE_RTT. If
yes, then BBR should exit PROBE_RTT mode and restore the cwnd to its
full value.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Yang [Wed, 22 Aug 2018 21:43:14 +0000 (17:43 -0400)]
tcp_bbr: add bbr_check_probe_rtt_done() helper
This patch add a helper function bbr_check_probe_rtt_done() to
1. check the condition to see if bbr should exit probe_rtt mode;
2. process the logic of exiting probe_rtt mode.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 22 Aug 2018 20:30:45 +0000 (13:30 -0700)]
ipv4: tcp: send zero IPID for RST and ACK sent in SYN-RECV and TIME-WAIT state
tcp uses per-cpu (and per namespace) sockets (net->ipv4.tcp_sk) internally
to send some control packets.
1) RST packets, through tcp_v4_send_reset()
2) ACK packets in SYN-RECV and TIME-WAIT state, through tcp_v4_send_ack()
These packets assert IP_DF, and also use the hashed IP ident generator
to provide an IPv4 ID number.
Geoff Alexander reported this could be used to build off-path attacks.
These packets should not be fragmented, since their size is smaller than
IPV4_MIN_MTU. Only some tunneled paths could eventually have to fragment,
regardless of inner IPID.
We really can use zero IPID, to address the flaw, and as a bonus,
avoid a couple of atomic operations in ip_idents_reserve()
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Geoff Alexander <alexandg@cs.unm.edu> Tested-by: Geoff Alexander <alexandg@cs.unm.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 22 Aug 2018 19:58:34 +0000 (12:58 -0700)]
addrconf: reduce unnecessary atomic allocations
All the 3 callers of addrconf_add_mroute() assert RTNL
lock, they don't take any additional lock either, so
it is safe to convert it to GFP_KERNEL.
Same for sit_add_v4_addrs().
Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 22 Aug 2018 15:25:44 +0000 (17:25 +0200)]
net_sched: fix unused variable warning in stmmac
The new tcf_exts_for_each_action() macro doesn't reference its
arguments when CONFIG_NET_CLS_ACT is disabled, which leads to
a harmless warning in at least one driver:
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c: In function 'tc_fill_actions':
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:64:6: error: unused variable 'i' [-Werror=unused-variable]
Adding a cast to void lets us avoid this kind of warning.
To be on the safe side, do it for all three arguments, not
just the one that caused the warning.
Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_cake: Fix TC filter flow override and expand it to hosts as well
The TC filter flow mapping override completely skipped the call to
cake_hash(); however that meant that the internal state was not being
updated, which ultimately leads to deadlocks in some configurations. Fix
that by passing the overridden flow ID into cake_hash() instead so it can
react appropriately.
In addition, the major number of the class ID can now be set to override
the host mapping in host isolation mode. If both host and flow are
overridden (or if the respective modes are disabled), flow dissection and
hashing will be skipped entirely; otherwise, the hashing will be kept for
the portions that are not set by the filter.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
net/ncsi: Fixup .dumpit message flags and ID check in Netlink handler
The ncsi_pkg_info_all_nl() .dumpit handler is missing the NLM_F_MULTI
flag, causing additional package information after the first to be lost.
Also fixup a sanity check in ncsi_write_package_info() to reject out of
range package IDs.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Tue, 21 Aug 2018 22:02:19 +0000 (00:02 +0200)]
net: ethernet: renesas: use SPDX identifier for Renesas drivers
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:13 +0000 (12:22 -0700)]
act_ife: fix a potential deadlock
use_all_metadata() acquires read_lock(&ife_mod_lock), then calls
add_metainfo() which calls find_ife_oplist() which acquires the same
lock again. Deadlock!
Introduce __add_metainfo() which accepts struct tcf_meta_ops *ops
as an additional parameter and let its callers to decide how
to find it. For use_all_metadata(), it already has ops, no
need to find it again, just call __add_metainfo() directly.
And, as ife_mod_lock is only needed for find_ife_oplist(),
this means we can make non-atomic allocation for populate_metalist()
now.
Fixes: 817e9f2c5c26 ("act_ife: acquire ife_mod_lock before reading ifeoplist") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:12 +0000 (12:22 -0700)]
act_ife: move tcfa_lock down to where necessary
The only time we need to take tcfa_lock is when adding
a new metainfo to an existing ife->metalist. We don't need
to take tcfa_lock so early and so broadly in tcf_ife_init().
This means we can always take ife_mod_lock first, avoid the
reverse locking ordering warning as reported by Vlad.
Reported-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Vlad Buslov <vladbu@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:11 +0000 (12:22 -0700)]
Revert "net: sched: act_ife: disable bh when taking ife_mod_lock"
This reverts commit 42c625a486f3 ("net: sched: act_ife: disable bh
when taking ife_mod_lock"), because what ife_mod_lock protects
is absolutely not touched in rate est timer BH context, they have
no race.
A better fix is following up.
Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:09 +0000 (12:22 -0700)]
net_sched: remove list_head from tc_action
After commit 90b73b77d08e, list_head is no longer needed.
Now we just need to convert the list iteration to array
iteration for drivers.
Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:06 +0000 (12:22 -0700)]
net_sched: remove unnecessary ops->delete()
All ops->delete() wants is getting the tn->idrinfo, but we already
have tc_action before calling ops->delete(), and tc_action has
a pointer ->idrinfo.
More importantly, each type of action does the same thing, that is,
just calling tcf_idr_delete_index().
So it can be just removed.
Fixes: b409074e6693 ("net: sched: add 'delete' function to action ops") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sun, 19 Aug 2018 19:22:05 +0000 (12:22 -0700)]
net_sched: improve and refactor tcf_action_put_many()
tcf_action_put_many() is mostly called to clean up actions on
failure path, but tcf_action_put_many(&actions[acts_deleted]) is
used in the ugliest way: it passes a slice of the array and
uses an additional NULL at the end to avoid out-of-bound
access.
acts_deleted is completely unnecessary since we can teach
tcf_action_put_many() scan the whole array and checks against
NULL pointer. Which also means tcf_action_delete() should
set deleted action pointers to NULL to avoid double free.
Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Registering another device with same MAC address (such as TAP, VPN or
DPDK KNI) will confuse the VF autobinding logic. Restrict the search
to only run if the device is known to be a PCI attached VF.
Fixes: e8ff40d4bff1 ("hv_netvsc: improve VF device matching") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Tue, 21 Aug 2018 14:05:42 +0000 (14:05 +0000)]
rds: tcp: remove duplicated include from tcp.c
Remove duplicated include.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In case memory resources for *fw* were allocated, release them before
return.
Addresses-Coverity-ID: 1472611 ("Resource leak") Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David Ahern [Mon, 20 Aug 2018 20:02:41 +0000 (13:02 -0700)]
net/ipv6: Put lwtstate when destroying fib6_info
Prior to the introduction of fib6_info lwtstate was managed by the dst
code. With fib6_info releasing lwtstate needs to be done when the struct
is freed.
Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kai-Heng Feng [Mon, 20 Aug 2018 04:43:51 +0000 (12:43 +0800)]
r8152: disable RX aggregation on new Dell TB16 dock
There's a new Dell TB16 dock with a different iSerialNumber.
Apply the same fix from commit 0b1655143df0 ("r8152: disable RX
aggregation on Dell TB16 dock") to this model.
BugLink: https://bugs.launchpad.net/bugs/1785780 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:45 +0000 (00:01 +0300)]
qed: Avoid sending mailbox commands when MFW is not responsive
Keep sending mailbox commands to the MFW when it is not responsive ends up
with a redundant amount of timeout expiries.
This patch prints the MCP status on the first command which is not
responded, and blocks the following commands.
Since the (un)load request commands might be not responded due to other
PFs, the patch also adds the option to skip the blocking upon a failure.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:44 +0000 (00:01 +0300)]
qed: Prevent a possible deadlock during driver load and unload
The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurrent load or unload of PFs.
This patch adds the option to sleep within the busy-waiting, and uses it
for the (un)load requests (which are not sent from an interrupt context) to
prevent the possible deadlock.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:43 +0000 (00:01 +0300)]
qed: Wait for MCP halt and resume commands to take place
Successive iterations of halting and resuming the management chip (MCP)
might fail, since currently the driver doesn't wait for these operations to
actually take place.
This patch prevents the driver from moving forward before the operations
are reflected in the state register.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:42 +0000 (00:01 +0300)]
qed: Wait for ready indication before rereading the shmem
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready indication.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This because ip6n->tnls_wc[0] point to fallback device in default, but
in non-default namespace, ip6n->tnls_wc[0] will be NULL, so add the NULL
check comparatively.
Fixes: e2948e5af8ee ("ip6_vti: fix creating fallback tunnel device for vti6") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
Falling back to MSI fixes the issue.
Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Tue, 14 Aug 2018 18:46:16 +0000 (21:46 +0300)]
net: sched: always disable bh when taking tcf_lock
Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.
Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:
[ 105.470398] ================================
[ 105.475014] WARNING: inconsistent lock state
[ 105.479628] 4.18.0-rc8+ #664 Not tainted
[ 105.483897] --------------------------------
[ 105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[ 105.509696] {SOFTIRQ-ON-W} state was registered at:
[ 105.514925] _raw_spin_lock+0x2c/0x40
[ 105.519022] tcf_bpf_init+0x579/0x820 [act_bpf]
[ 105.523990] tcf_action_init_1+0x4e4/0x660
[ 105.528518] tcf_action_init+0x1ce/0x2d0
[ 105.532880] tcf_exts_validate+0x1d8/0x200
[ 105.537416] fl_change+0x55a/0x268b [cls_flower]
[ 105.542469] tc_new_tfilter+0x748/0xa20
[ 105.546738] rtnetlink_rcv_msg+0x56a/0x6d0
[ 105.551268] netlink_rcv_skb+0x18d/0x200
[ 105.555628] netlink_unicast+0x2d0/0x370
[ 105.559990] netlink_sendmsg+0x3b9/0x6a0
[ 105.564349] sock_sendmsg+0x6b/0x80
[ 105.568271] ___sys_sendmsg+0x4a1/0x520
[ 105.572547] __sys_sendmsg+0xd7/0x150
[ 105.576655] do_syscall_64+0x72/0x2c0
[ 105.580757] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 105.586243] irq event stamp: 489296
[ 105.590084] hardirqs last enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[ 105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[ 105.609277] softirqs last enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0
[ 105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190
[ 105.626813]
other info that might help us debug this:
[ 105.633976] Possible unsafe locking scenario:
Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:
[ 162.108959] Possible interrupt unsafe locking scenario:
In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.
Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock") Fixes: 764e9a24480f ("net: sched: act_vlan: remove dependency on rtnl lock") Fixes: 729e01260989 ("net: sched: act_tunnel_key: remove dependency on rtnl lock") Fixes: d77284956656 ("net: sched: act_sample: remove dependency on rtnl lock") Fixes: e8917f437006 ("net: sched: act_gact: remove dependency on rtnl lock") Fixes: b6a2b971c0b0 ("net: sched: act_csum: remove dependency on rtnl lock") Fixes: 2142236b4584 ("net: sched: act_bpf: remove dependency on rtnl lock") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 19 Aug 2018 16:56:38 +0000 (09:56 -0700)]
Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make
it to userspace. Support for three devices has been added:
- the ISA-mandated timers on RISC-V systems.
- the ISA-mandated first-level interrupt controller on RISC-V
systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
- SiFive's platform-level interrupt controller, which talks to the
actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
- build fixes for various configurations:
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary
for some 32-bit configurations.
* !SMP && PERF_EVENTS
- Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
- Fixes to ptrace(), which while not being sufficient to fully make
GDB work are at least sufficient to get simple GDB tasks to work.
- Early printk support via RISC-V's architecturally mandated SBI
console device.
- A fix to our early debug trap handler to ensure it's always
aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for
me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
on the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the
new drivers in shape!"
* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
dt-bindings: interrupt-controller: RISC-V local interrupt controller
RISC-V: Fix !CONFIG_SMP compilation error
irqchip: add a SiFive PLIC driver
RISC-V: Add the directive for alignment of stvec's value
clocksource: new RISC-V SBI timer driver
RISC-V: implement low-level interrupt handling
RISC-V: add a definition for the SIE SEIE bit
RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
RISC-V: simplify software interrupt / IPI code
RISC-V: remove timer leftovers
RISC-V: Add early printk support via the SBI console
RISC-V: Don't increment sepc after breakpoint.
RISC-V: implement __lshrti3.
RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
Linus Torvalds [Sun, 19 Aug 2018 16:30:44 +0000 (09:30 -0700)]
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull UIO fix from Greg KH:
"Here is a single UIO fix that I forgot to send before 4.18-final came
out. It reverts a UIO patch that went in the 4.18 development window
that was causing problems.
This patch has been in linux-next for a while with no problems, I just
forgot to send it earlier, or as part of the larger char/misc patch
series from yesterday, my fault"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "uio: use request_threaded_irq instead"
Linus Torvalds [Sat, 18 Aug 2018 23:45:27 +0000 (16:45 -0700)]
Merge tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This introduces devres helpers and an API to request a lock by name,
then migrates the sprd SPI driver to use these"
* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
hwspinlock: Fix incorrect return pointers
spi: sprd: Change to use devm_hwspin_lock_request_specific()
spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
hwspinlock: Fix one comment mistake
hwspinlock: Remove redundant config
hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
hwspinlock: Add devm_xxx() APIs to request/free hwlock
hwspinlock: Add one new API to support getting a specific hwlock by the name
Linus Torvalds [Sat, 18 Aug 2018 23:43:57 +0000 (16:43 -0700)]
Merge tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This fixes a few compile and kerneldoc warnings, allows rpmsg devices
to handle power domains, allow for labeling GLINK edges and supports
compat for rpmsg_char"
* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
rpmsg: Add compat ioctl for rpmsg char driver
rpmsg: glink: Store edge name for glink device
dt-bindings: soc: qcom: Add label for GLINK bindings
rpmsg: core: add support to power domains for devices
rpmsg: smd: fix kerneldoc warnings
rpmsg: glink: Fix various kerneldoc warnings.
rpmsg: glink: correctly annotate intent members
rpmsg: smd: Add missing include of sizes.h
Linus Torvalds [Sat, 18 Aug 2018 23:42:04 +0000 (16:42 -0700)]
Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
subdevices, refactors the Qualcomm Hexagon support to allow reuse
between several drivers, makes authentication in the MDT file loader
optional, migrates a few format strings to use %pK and migrates the
Davinci driver to use the reset framework"
* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
remoteproc/davinci: use the reset framework
remoteproc/davinci: Mark error recovery as disabled
remoteproc: st_slim: replace "%p" with "%pK"
remoteproc: replace "%p" with "%pK"
remoteproc: qcom: fix Q6V5_WCSS dependencies
remoteproc: Reset table_ptr in rproc_start() failure paths
remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
remoteproc: qcom q6v5: fix modular build
remoteproc: Introduce prepare and unprepare for subdevices
remoteproc: rename subdev probe and remove functions
remoteproc: Make client initialize ops in rproc_subdev
remoteproc: Make start and stop in subdev optional
remoteproc: Rename subdev functions to start/stop
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
remoteproc: qcom: adsp: Use common q6v5 helpers
remoteproc: q6v5: Extract common resource handling
remoteproc: qcom: mdt_loader: Make the firmware authentication optional
Linus Torvalds [Sat, 18 Aug 2018 23:16:57 +0000 (16:16 -0700)]
Merge tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add MEN 16z069 IP-Core driver
- renesas-wdt: add support for the R8A77990 wdt
- stm32_iwdg: Add stm32mp1 support and pclk feature
- sp805_wdt, orion_wdt, sprd_wdt: several improvements
- imx2_wdt, stmp3xxx: switch to SPDX identifier
* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: fix dependencies of menz69_wdt.o
watchdog: sp805: Add clock-frequency property
watchdog: add driver for the MEN 16z069 IP-Core
watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
watchdog: stmp3xxx: Switch to SPDX identifier
watchdog: imx2_wdt: Switch to SPDX identifier
watchdog: sp805: set WDOG_HW_RUNNING when appropriate
watchdog: sp805: add 'timeout-sec' DT property support
dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
dt-bindings: watchdog: Consolidate SP805 binding docs
watchdog: orion_wdt: Mark watchdog as active when running at probe
watchdog: stm32: add pclk feature for stm32mp1
dt-bindings: watchdog: add stm32mp1 support
dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
Linus Torvalds [Sat, 18 Aug 2018 22:55:59 +0000 (15:55 -0700)]
Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
driver updates:
- new managed helper for dmaengine framework registration
- split dmaengine pause capability to pause and resume and allow
drivers to report that individually
- update dma_request_chan_by_mask() to handle deferred probing
- move imx-sdma to use virt-dma
- new driver for Actions Semi Owl family S900 controller
- minor updates to intel, renesas, mv_xor, pl330 etc"
* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
dmaengine: Add Actions Semi Owl family S900 DMA driver
dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
dmaengine: mic_x100_dma: use the new helper to simplify the code
dmaengine: add a new helper dmaenginem_async_device_register
dmaengine: imx-sdma: add memcpy interface
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: dma_request_chan_by_mask() to handle deferred probing
dmaengine: pl330: fix irq race with terminate_all
dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
dmaengine: mv_xor_v2: enable COMPILE_TEST
dmaengine: mv_xor_v2: move unmap to before callback
dmaengine: mv_xor_v2: convert callback to helper function
dmaengine: mv_xor_v2: kill the tasklets upon exit
dmaengine: mv_xor_v2: explicitly freeup irq
dmaengine: sh: rcar-dmac: Add dma_pause operation
dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
dmaengine: idma64: Support dmaengine_terminate_sync()
dmaengine: hsu: Support dmaengine_terminate_sync()
...
Linus Torvalds [Sat, 18 Aug 2018 22:54:05 +0000 (15:54 -0700)]
Merge tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"Updates for MMC for v4.19.
MMC core:
- Add some fine-grained hooks to further support HS400 tuning
- Improve error path for bus width setting for HS400es
- Use a common method when checking R1 status
MMC host:
- renesas_sdhi: Add r8a77990 support
- renesas_sdhi: Add eMMC HS400 mode support
- tmio/renesas_sdhi: Improve tuning/clock management
- tmio: Add eMMC HS400 mode support
- sunxi: Add support for 3.3V eMMC DDR mode
- mmci: Initial support to manage variant specific callbacks
- sdhci: Don't try 3.3V I/O voltage if not supported
- sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
- sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
- sdhci-msm: Add support for new version sdcc V5
- sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
- sdhci-pci-o2micro: Add support for O2 hardware tuning
- sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
- sdhci-pci: Add support for Intel ICP
- sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
- sdhci-tegra: Fix eMMC DDR52 mode
- sdhci-tegra: Improve clock management
- dw_mmc-rockchip: Document compatible string for px30
- sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
- sdhci-of-esdhc: Set proper DMA mask for ls104x chips
- sdhci-of-esdhc: Improve clock management
- sdhci-of-arasan: Add a quirk to manage unstable clocks
- dw_mmc-exynos: Address potential external abort during system resume
- pxamci: Add support for common MMC DT bindings
- pxamci: Several cleanups and improvements
- pxamci: Merge immutable branch for pxa to switch to DMA slave maps"
* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
mmc: core: improve reasonableness of bus width setting for HS400es
mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
mmc: renesas_sdhi: Fix sampling clock position selecting
mmc: tmio: Fix tuning flow
mmc: sunxi: remove output of virtual base address
dt-bindings: mmc: rockchip-dw-mshc: add description for px30
mmc: renesas_sdhi: Add r8a77990 support
mmc: sunxi: allow 3.3V DDR when DDR is available
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
mmc: mmci: Initial support to manage variant specific callbacks
mmc: tegra: Force correct divider calculation on DDR50/52
mmc: sdhci: Add MSI interrupt support for O2 SD host
mmc: sdhci: Add support for O2 hardware tuning
mmc: sdhci: Export sdhci tuning function symbol
mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
mmc: sdhci: Add support for O2 eMMC HS200 mode
mmc: tegra: Add and use tegra_sdhci_get_max_clock()
mmc: sdhci-esdhc-imx: fix indent
mmc: sdhci-esdhc-imx: disable clocks before changing frequency
mmc: tegra: prevent ACMD23 on Tegra 3
...
Linus Torvalds [Sat, 18 Aug 2018 19:30:42 +0000 (12:30 -0700)]
pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function
This function was created as a deprecated fallback case back in 2010 by
commit eb14120f743d ("pcmcia: re-work pcmcia_request_irq()") for legacy
cases.
Actual in-kernel users haven't been around for a long while. The last
in-kernel user was apparently removed four years ago by commit 5f5316fcd08e ("am2150: Update nmclan_cs.c to use update PCMCIA API").
Linus Torvalds [Sat, 18 Aug 2018 19:19:56 +0000 (12:19 -0700)]
deprecate the '__deprecated' attribute warnings entirely and for good
We haven't had lots of deprecation warnings lately, but the rdma use of
it made them flare up again.
They are not useful. They annoy everybody, and nobody ever does
anything about them, because it's always "somebody elses problem". And
when people start thinking that warnings are normal, they stop looking
at them, and the real warnings that mean something go unnoticed.
If you want to get rid of a function, just get rid of it. Convert every
user to the new world order.
And if you can't do that, then don't annoy everybody else with your
marking that says "I couldn't be bothered to fix this, so I'll just spam
everybody elses build logs with warnings about my laziness".
Make a kernelnewbies wiki page about things that could be cleaned up,
write a blog post about it, or talk to people on the mailing lists. But
don't add warnings to the kernel build about cleanup that you think
should happen but you aren't doing yourself.
Linus Torvalds [Sat, 18 Aug 2018 18:44:53 +0000 (11:44 -0700)]
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
Linus Torvalds [Sat, 18 Aug 2018 18:04:51 +0000 (11:04 -0700)]
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
Linus Torvalds [Sat, 18 Aug 2018 18:00:00 +0000 (11:00 -0700)]
Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.
Lots of churn here, with tons of cleanups happening in staging
drivers, a removal of an old crypto driver that no one was using
(skein), and the addition of some new IIO drivers. Also added was a
"gasket" driver from Google that needs loads of work and the erofs
filesystem.
Even with adding all of the new drivers and a new filesystem, we are
only adding about 1000 lines overall to the kernel linecount, which
shows just how much cleanup happened, and how big the unused crypto
driver was.
All of these have been in the linux-next tree for a while now with no
reported issues"
* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
staging:rtl8192u: Remove unused macro definitions - Style
staging:rtl8192u: Add spaces around '+' operator - Style
staging:rtl8192u: Remove stale comment - Style
staging: rtl8188eu: remove unused mp_custom_oid.h
staging: fbtft: Add spaces around / - Style
staging: fbtft: Erases some repetitive usage of function name - Style
staging: fbtft: Adjust some empty-line problems - Style
staging: fbtft: Removes one nesting level to help readability - Style
staging: fbtft: Changes gamma table to define.
staging: fbtft: A bit more information on dev_err.
staging: fbtft: Fixes some alignment issues - Style
staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
staging: rtl8188eu: remove unused array dB_Invert_Table
staging: rtl8188eu: remove whitespace, add missing blank line
staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
staging: rtl8188eu: remove whitespace - style
staging: rtl8188eu: cleanup block comment - style
staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
staging: rtlwifi: refactor rtl_get_tcb_desc
...
Linus Torvalds [Sat, 18 Aug 2018 17:50:41 +0000 (10:50 -0700)]
Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver pull request for 4.19-rc1.
It's not all that big, just a number of small serial driver updates
and fixes, along with some better vt handling for unicode characters
for those using braille terminals.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
tty: serial: 8250: Revert NXP SC16C2552 workaround
serial: 8250_exar: Read INT0 from slave device, too
tty: rocket: Fix possible buffer overwrite on register_PCI
serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
serial: 8250_dw: always set baud rate in dw8250_set_termios
dt-bindings: serial: Add binding for uartlite
tty: serial: uartlite: Add support for suspend and resume
tty: serial: uartlite: Add clock adaptation
tty: serial: uartlite: Add structure for private data
serial: sh-sci: Improve support for separate TEI and DRI interrupts
serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
serial: sh-sci: Allow for compressed SCIF address
serial: sh-sci: Improve interrupts description
serial: 8250: Use cached port name directly in messages
serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
vt: drop unused struct vt_struct
vt: avoid a VLA in the unicode screen scroll function
vt: add /dev/vcsu* to devices.txt
vt: coherence validation code for the unicode screen buffer
vt: selection: take screen contents from uniscr if available
...
Linus Torvalds [Sat, 18 Aug 2018 17:21:49 +0000 (10:21 -0700)]
Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.
Nothing huge but there was a lot of work that happened this
development cycle:
- lots of type-c work, with drivers graduating out of staging, and
displayport support being added.
- new PHY drivers
- the normal collection of gadget driver updates and fixes
- code churn to work on the urb handling path, using irqsave()
everywhere in anticipation of making this codepath a lot simpler in
the future.
- usbserial driver fixes and reworks
- other misc changes
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: serial: pl2303: add a new device id for ATEN
usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
usb: dwc3: gadget: Check MaxPacketSize from descriptor
usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
usb: dwc2: Turn on uframe_sched on "amlogic" platforms
usb: dwc2: Turn on uframe_sched on "his" platforms
usb: dwc2: Turn on uframe_sched on "bcm" platforms
usb: dwc2: gadget: ISOC's starting flow improvement
usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
usb: dwc3: core: Enable AutoRetry feature in the controller
usb: dwc3: Set default mode for dwc_usb31
usb: gadget: udc: renesas_usb3: Add register of usb role switch
usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
usb: dwc2: Modify dwc2_readl/writel functions prototype
usb: dwc3: pci: Intel Merrifield can be host
usb: dwc3: pci: Supply device properties via driver data
arm64: dts: dwc3: description of incr burst type
usb: dwc3: Enable undefined length INCR burst type
usb: dwc3: add global soc bus configuration reg0
usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
...
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
restrictions, from Yonghong.
2) Fix a suspicious RCU rcu_dereference_check() warning triggered
from removing a device's XDP memory allocator by using the correct
rhashtable lookup function, from Tariq.
3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
as well as enforcing module aliases for ULPs. Another fix for BPF
map redirect to make them work again with tail calls, from Daniel.
4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Infinite loop in IPVS when net namespace is released, from
Tan Hu.
2) Do not show negative timeouts in ip_vs_conn by using the new
jiffies_delta_to_msecs(), patches from Matteo Croce.
3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter,
from Florian Westphal.
4) Fix overflow in set size allocation, from Taehee Yoo.
5) Use netlink_dump_start() from ctnetlink to fix memleak from
the error path, again from Florian.
6) Register nfnetlink_subsys in last place, otherwise netns
init path may lose race and see net->nft uninitialized data.
This also reverts previous attempt to fix this by increase
netns refcount, patches from Florian.
7) Remove conntrack entries on layer 4 protocol tracker module
removal, from Florian.
8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from
Michal Hocko.
9) Get tproxy documentation in sync with existing codebase,
from Mate Eckl.
10) Honor preset layer 3 protocol via ctx->family in the new nft_ct
timeout infrastructure, from Harsha Sharma.
11) Let uapi nfnetlink_osf.h compile standalone with no errors,
from Dmitry V. Levin.
12) Missing braces compilation warning in nft_tproxy, patch from
Mate Eclk.
13) Disregard bogus check to bail out on non-anonymous sets from
the dynamic set update extension.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 18 Aug 2018 00:27:58 +0000 (17:27 -0700)]
Merge tag '9p-for-4.19-2' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"This contains mostly fixes (6 to be backported to stable) and a few
changes, here is the breakdown:
- rework how fids are attributed by replacing some custom tracking in
a list by an idr
- for packet-based transports (virtio/rdma) validate that the packet
length matches what the header says
- a few race condition fixes found by syzkaller
- missing argument check when NULL device is passed in sys_mount
- a few virtio fixes
- some spelling and style fixes"
* tag '9p-for-4.19-2' of git://github.com/martinetd/linux: (21 commits)
net/9p/trans_virtio.c: add null terminal for mount tag
9p/virtio: fix off-by-one error in sg list bounds check
9p: fix whitespace issues
9p: fix multiple NULL-pointer-dereferences
fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed
9p: validate PDU length
net/9p/trans_fd.c: fix race by holding the lock
net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()
net/9p/virtio: Fix hard lockup in req_done
net/9p/trans_virtio.c: fix some spell mistakes in comments
9p/net: Fix zero-copy path in the 9p virtio transport
9p: Embed wait_queue_head into p9_req_t
9p: Replace the fidlist with an IDR
9p: Change p9_fid_create calling convention
9p: Fix comment on smp_wmb
net/9p/client.c: version pointer uninitialized
fs/9p/v9fs.c: fix spelling mistake "Uknown" -> "Unknown"
net/9p: fix error path of p9_virtio_probe
9p/net/protocol.c: return -ENOMEM when kmalloc() failed
net/9p/client.c: add missing '\n' at the end of p9_debug()
...
Linus Torvalds [Fri, 17 Aug 2018 23:49:31 +0000 (16:49 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
- a few misc things
- a few Y2038 fixes
- ntfs fixes
- arch/sh tweaks
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
mm/hmm.c: remove unused variables align_start and align_end
fs/userfaultfd.c: remove redundant pointer uwq
mm, vmacache: hash addresses based on pmd
mm/list_lru: introduce list_lru_shrink_walk_irq()
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
mm/sparse: delete old sparse_init and enable new one
mm/sparse: add new sparse_init_nid() and sparse_init()
mm/sparse: move buffer init/fini to the common place
mm/sparse: use the new sparse buffer functions in non-vmemmap
mm/sparse: abstract sparse buffer allocations
mm/hugetlb.c: don't zero 1GiB bootmem pages
mm, page_alloc: double zone's batchsize
mm/oom_kill.c: document oom_lock
mm/hugetlb: remove gigantic page support for HIGHMEM
mm, oom: remove sleep from under oom_lock
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
...
Colin Ian King [Fri, 17 Aug 2018 22:50:07 +0000 (15:50 -0700)]
mm/hmm.c: remove unused variables align_start and align_end
Variables align_start and align_end are being assigned but are never
used hence they are redundant and can be removed.
Cleans up clang warnings:
warning: variable 'align_start' set but not used [-Wunused-but-set-variable]
warning: variable 'align_size' set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20180714161124.3923-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 17 Aug 2018 22:50:01 +0000 (15:50 -0700)]
fs/userfaultfd.c: remove redundant pointer uwq
Pointer uwq is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'uwq' set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20180717090802.18357-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 17 Aug 2018 22:49:58 +0000 (15:49 -0700)]
mm, vmacache: hash addresses based on pmd
When perf profiling a wide variety of different workloads, it was found
that vmacache_find() had higher than expected cost: up to 0.08% of cpu
utilization in some cases. This was found to rival other core VM
functions such as alloc_pages_vma() with thp enabled and default
mempolicy, and the conditionals in __get_vma_policy().
VMACACHE_HASH() determines which of the four per-task_struct slots a vma
is cached for a particular address. This currently depends on the pfn,
so pfn 5212 occupies a different vmacache slot than its neighboring pfn
5213.
vmacache_find() iterates through all four of current's vmacache slots
when looking up an address. Hashing based on pfn, an address has
~1/VMACACHE_SIZE chance of being cached in the first vmacache slot, or
about 25%, *if* the vma is cached.
This patch hashes an address by its pmd instead of pte to optimize for
workloads with good spatial locality. This results in a higher
probability of vmas being cached in the first slot that is checked:
normally ~70% on the same workloads instead of 25%.
Provide list_lru_shrink_walk_irq() and let it behave like
list_lru_walk_one() except that it locks the spinlock with
spin_lock_irq(). This is used by scan_shadow_nodes() because its lock
nests within the i_pages lock which is acquired with IRQ. This change
allows to use proper locking promitives instead hand crafted
lock_irq_disable() plus spin_lock().
There is no EXPORT_SYMBOL provided because the current user is in-kernel
only.
Add list_lru_shrink_walk_irq() which acquires the spinlock with the
proper locking primitives.
Link: http://lkml.kernel.org/r/20180716111921.5365-5-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
__list_lru_walk_one() is invoked with struct list_lru *lru, int nid as
the first two argument. Those two are only used to retrieve struct
list_lru_node. Since this is already done by the caller of the function
for the locking, we can pass struct list_lru_node* directly and avoid
the dance around it.
Link: http://lkml.kernel.org/r/20180716111921.5365-4-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
Move the locking inside __list_lru_walk_one() to its caller. This is a
preparation step in order to introduce list_lru_walk_one_irq() which
does spin_lock_irq() instead of spin_lock() for the locking.
Link: http://lkml.kernel.org/r/20180716111921.5365-3-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
Patch series "mm/list_lru: Add list_lru_shrink_walk_irq() and a user".
This series removes the local_irq_disable() around
list_lru_shrink_walk() (as used by mm/workingset) by adding
list_lru_shrink_walk_irq().
Vladimir Davydov preferred this over `irq' argument which I added to
struct list_lru.
The initial post (of this series) received a Reviewed-by tag by Vladimir
Davydov which I added to each patch of the series. The series applies
on top of akpm's tree which has Kirill's shrink_slab series and does not
clash with it (akpm asked me to wait a week or so and repost it then).
I tested the code paths by triggering the OOM-killer via memory over
commit and lockdep did not complain (nor did I see any warnings).
This patch (of 4):
list_lru_walk_node() invokes __list_lru_walk_one() with -1 as the
memcg_idx parameter. The same can be achieved by list_lru_walk_one() and
passing NULL as memcg argument which then gets converted into -1. This is
a preparation step when the spin_lock() function is lifted to the caller
of __list_lru_walk_one(). Invoke list_lru_walk_one() instead
__list_lru_walk_one() when possible.
Link: http://lkml.kernel.org/r/20180716111921.5365-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Ying [Fri, 17 Aug 2018 22:49:41 +0000 (15:49 -0700)]
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
CONFIG_THP_SWAP should depend on CONFIG_SWAP, because it's unreasonable
to optimize swapping for THP (Transparent Huge Page) without basic
swapping support.
In original code, when CONFIG_SWAP=n and CONFIG_THP_SWAP=y,
split_swap_cluster() will not be built because it is in swapfile.c, but
it will be called in huge_memory.c. This doesn't trigger a build error
in practice because the call site is enclosed by PageSwapCache(), which
is defined to be constant 0 when CONFIG_SWAP=n. But this is fragile and
should be fixed.
The comments are fixed too to reflect the latest progress.
Link: http://lkml.kernel.org/r/20180713021228.439-1-ying.huang@intel.com Fixes: 38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:37 +0000 (15:49 -0700)]
mm/sparse: delete old sparse_init and enable new one
Rename new_sparse_init() to sparse_init() which enables it. Delete old
sparse_init() and all the code that became obsolete with.
[pasha.tatashin@oracle.com: remove unused sparse_mem_maps_populate_node()] Link: http://lkml.kernel.org/r/20180716174447.14529-6-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180712203730.8703-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Tested-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:33 +0000 (15:49 -0700)]
mm/sparse: add new sparse_init_nid() and sparse_init()
sparse_init() requires to temporary allocate two large buffers: usemap_map
and map_map. Baoquan He has identified that these buffers are so large
that Linux is not bootable on small memory machines, such as a kdump boot.
The buffers are especially large when CONFIG_X86_5LEVEL is set, as they
are scaled to the maximum physical memory size.
Baoquan provided a fix, which reduces these sizes of these buffers, but it
is much better to get rid of them entirely.
Add a new way to initialize sparse memory: sparse_init_nid(), which only
operates within one memory node, and thus allocates memory either in large
contiguous block or allocates section by section. This eliminates the
need for use of temporary buffers.
For simplified bisecting and review temporarly call sparse_init()
new_sparse_init(), the new interface is going to be enabled as well as old
code removed in the next patch.
Link: http://lkml.kernel.org/r/20180712203730.8703-5-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Oscar Salvador <osalvador@suse.de> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:30 +0000 (15:49 -0700)]
mm/sparse: move buffer init/fini to the common place
Now that both variants of sparse memory use the same buffers to populate
memory map, we can move sparse_buffer_init()/sparse_buffer_fini() to the
common place.
Link: http://lkml.kernel.org/r/20180712203730.8703-4-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Tested-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:26 +0000 (15:49 -0700)]
mm/sparse: use the new sparse buffer functions in non-vmemmap
non-vmemmap sparse also allocated large contiguous chunk of memory, and if
fails falls back to smaller allocations. Use the same functions to
allocate buffer as the vmemmap-sparse
Link: http://lkml.kernel.org/r/20180712203730.8703-3-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Oscar Salvador <osalvador@suse.de> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:21 +0000 (15:49 -0700)]
mm/sparse: abstract sparse buffer allocations
Patch series "sparse_init rewrite", v6.
In sparse_init() we allocate two large buffers to temporary hold usemap
and memmap for the whole machine. However, we can avoid doing that if
we changed sparse_init() to operated on per-node bases instead of doing
it on the whole machine beforehand.
As shown by Baoquan
http://lkml.kernel.org/r/20180628062857.29658-1-bhe@redhat.com
The buffers are large enough to cause machine stop to boot on small
memory systems.
Another benefit of these changes is that they also obsolete
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER.
This patch (of 5):
When struct pages are allocated for sparse-vmemmap VA layout, we first try
to allocate one large buffer, and than if that fails allocate struct pages
for each section as we go.
The code that allocates buffer is uses global variables and is spread
across several call sites.
Cleanup the code by introducing three functions to handle the global
buffer:
sparse_buffer_init() initialize the buffer
sparse_buffer_fini() free the remaining part of the buffer
sparse_buffer_alloc() alloc from the buffer, and if buffer is empty
return NULL
Define these functions in sparse.c instead of sparse-vmemmap.c because
later we will use them for non-vmemmap sparse allocations as well.
[akpm@linux-foundation.org: use PTR_ALIGN()]
[akpm@linux-foundation.org: s/BUG_ON/WARN_ON/] Link: http://lkml.kernel.org/r/20180712203730.8703-2-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Oscar Salvador <osalvador@suse.de> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cannon Matthews [Fri, 17 Aug 2018 22:49:17 +0000 (15:49 -0700)]
mm/hugetlb.c: don't zero 1GiB bootmem pages
When using 1GiB pages during early boot, use the new
memblock_virt_alloc_try_nid_raw() to allocate memory without zeroing it.
Zeroing out hundreds or thousands of GiB in a single core memset() call
is very slow, and can make early boot last upwards of 20-30 minutes on
multi TiB machines.
The memory does not need to be zero'd as the hugetlb pages are always
zero'd on page fault.
Tested: Booted with ~3800 1G pages, and it booted successfully in
roughly the same amount of time as with 0, as opposed to the 25+ minutes
it would take before.
Link: http://lkml.kernel.org/r/20180711213313.92481-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aaron Lu [Fri, 17 Aug 2018 22:49:14 +0000 (15:49 -0700)]
mm, page_alloc: double zone's batchsize
To improve page allocator's performance for order-0 pages, each CPU has
a Per-CPU-Pageset(PCP) per zone. Whenever an order-0 page is needed,
PCP will be checked first before asking pages from Buddy. When PCP is
used up, a batch of pages will be fetched from Buddy to improve
performance and the size of batch can affect performance.
zone's batch size gets doubled last time by commit ba56e91c9401("mm:
page_alloc: increase size of per-cpu-pages") over ten years ago. Since
then, CPU has envolved a lot and CPU's cache sizes also increased.
Dave Hansen is concerned the current batch size doesn't fit well with
modern hardware and suggested me to do two things: first, use a page
allocator intensive benchmark, e.g. will-it-scale/page_fault1 to find
out how performance changes with different batch sizes on various
machines and then choose a new default batch size; second, see how this
new batch size work with other workloads.
In the first test, we saw performance gains on high-core-count systems
and little to no effect on older systems with more modest core counts.
In this phase's test data, two candidates: 63 and 127 are chosen.
In the second step, ebizzy, oltp, kbuild, pigz, netperf, vm-scalability
and more will-it-scale sub-tests are tested to see how these two
candidates work with these workloads and decides a new default according
to their results.
Most test results are flat. will-it-scale/page_fault2 process mode has
10%-18% performance increase on 4-sockets Skylake and Broadwell.
vm-scalability/lru-file-mmap-read has 17%-47% performance increase for
4-sockets servers while for 2-sockets servers, it caused 3%-8% performance
drop. Further analysis showed that, with a larger pcp->batch and thus
larger pcp->high(the relationship of pcp->high=6 * pcp->batch is
maintained in this patch), zone lock contention shifted to LRU add side
lock contention and that caused performance drop. This performance drop
might be mitigated by others' work on optimizing LRU lock.
Another downside of increasing pcp->batch is, when PCP is used up and need
to fetch a batch of pages from Buddy, since batch is increased, that time
can be longer than before. My understanding is, this doesn't affect
slowpath where direct reclaim and compaction dominates. For fastpath,
throughput is a win(according to will-it-scale/page_fault1) but worst
latency can be larger now.
Overall, I think double the batch size from 31 to 63 is relatively safe
and provide good performance boost for high-core-count systems.
The two phase's test results are listed below(all tests are done with THP
disabled).
Phase one(will-it-scale/page_fault1) test results:
Skylake-EX: increased batch size has a good effect on zone->lock
contention, though LRU contention will rise at the same time and
limited the final performance increase.
Skylake-EP: although increased batch reduced zone->lock contention, but
the effect is not as good as EX: zone->lock contention is still as high as
20% with a very high batch value instead of 1% on Skylake-EX or 5% on
Broadwell-EX. Also, total_contention actually decreased with a higher
batch but that doesn't translate to performance increase.
Broadwell-EP: zone->lock and lru lock had an agreement to make sure
performance doesn't increase and they successfully managed to keep total
contention at 70%.
Sandybridge-Desktop: the 0% contention isn't accurate but caused by
dropped fractional part. Since multiple contention path's contentions
are all under 1% here, with some arithmetic operations like add, the
final deviation could be as large as 3%.
Mike Kravetz [Fri, 17 Aug 2018 22:49:07 +0000 (15:49 -0700)]
mm/hugetlb: remove gigantic page support for HIGHMEM
This reverts ee8f248d266e ("hugetlb: add phys addr to struct
huge_bootmem_page").
At one time powerpc used this field and supporting code. However that
was removed with commit 79cc38ded1e1 ("powerpc/mm/hugetlb: Add support
for reserving gigantic huge pages via kernel command line").
There are no users of this field and supporting code, so remove it.
Link: http://lkml.kernel.org/r/20180711195913.1294-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mirror_ubuntu-hirsute-kernel.git / log