Andre Edich [Wed, 26 Aug 2020 11:17:16 +0000 (13:17 +0200)]
smsc95xx: use usbnet->driver_priv
Using `void *driver_priv` instead of `unsigned long data[]` is more
straightforward way to recover the `struct smsc95xx_priv *` from the
`struct net_device *`.
Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Wed, 26 Aug 2020 11:17:15 +0000 (13:17 +0200)]
smsc95xx: remove redundant function arguments
This patch removes arguments netdev and phy_id from the functions
smsc95xx_mdio_read_nopm and smsc95xx_mdio_write_nopm. Both removed
arguments are recovered from a new argument `struct usbnet *dev`.
Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 13:17:40 +0000 (06:17 -0700)]
Merge tag 'mac80211-next-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have:
* some code to support SAE (WPA3) offload in AP mode
* many documentation (wording) fixes/updates
* netlink policy updates, including the use of NLA_RANGE
with binary attributes
* regulatory improvements for adjacent frequency bands
* and a few other small additions/refactorings/cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 27 Aug 2020 12:19:23 +0000 (14:19 +0200)]
gtp: add notification mechanism
Like all other network functions, let's notify gtp context on creation and
deletion.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
please apply the following patch series for qeth to netdev's net-next tree.
Patch 8 makes some improvements to how we handle HW address events,
avoiding some uncertainty around processing stale events after we
switched off the feature.
Except for that it's all straight-forward cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:05 +0000 (10:17 +0200)]
s390/qeth: strictly order bridge address events
The current code for bridge address events has two shortcomings in its
control sequence:
1. after disabling address events via PNSO, we don't flush the remaining
events from the event_wq. So if the feature is re-enabled fast
enough, stale events could leak over.
2. PNSO and the events' arrival via the READ ccw device are unordered.
So even if we flushed the workqueue, it's difficult to say whether
the READ device might produce more events onto the workqueue
afterwards.
Fix this by
1. explicitly fencing off the events when we no longer care, in the
READ device's event handler. This ensures that once we flush the
workqueue, it doesn't get additional address events.
2. Flush the workqueue after disabling the events & fencing them off.
As the code that triggers the flush will typically hold the sbp_lock,
we need to rework the worker code to avoid a deadlock here in case
of a 'notifications-stopped' event. In case of lock contention,
requeue such an event with a delay. We'll eventually aquire the lock,
or spot that the feature has been disabled and the event can thus be
discarded.
This leaves the theoretical race that a stale event could arrive
_after_ we re-enabled ourselves to receive events again. Such an event
would be impossible to distinguish from a 'good' event, nothing we can
do about it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:04 +0000 (10:17 +0200)]
s390/qeth: unify structs for bridge port state
The data returned from IPA_SBP_QUERY_BRIDGE_PORTS and
IPA_SBP_BRIDGE_PORT_STATE_CHANGE has the same format. Use a single
struct definition for it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:03 +0000 (10:17 +0200)]
s390/qeth: copy less data from bridge state events
Current code copies _all_ entries from the event into a worker, when we
later only need specific data from the first entry.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:02 +0000 (10:17 +0200)]
s390/qeth: don't let HW override the configured port role
The only time that our Bridgeport role should change is when we change
the configuration ourselves. In which case we also adjust our internal
state tracking, no need to do it again when we receive the corresponding
event.
Removing the locked section helps a subsequent patch that needs to flush
the workqueue while under sbp_lock.
It would be nice to raise a warning here in case HW does weird things
after all, but this could end up generating false-positives when we
change the configuration ourselves.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:01 +0000 (10:17 +0200)]
s390/qeth: don't disable address events during initialization
A newly initialized device is disabled for address events, there's no
need to explicitly disable them.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 27 Aug 2020 08:17:00 +0000 (10:17 +0200)]
s390/qeth: make queue lock a proper spinlock
queue->state is a ternary spinlock in disguise, used by
OSA's TX completion path to lock the Output Queue and flush any pending
packets on it to the device. If the Queue is already locked by our TX
code, setting the lock word to QETH_OUT_Q_LOCKED_FLUSH lets the TX
completion code move on - the TX path will later take care of things
when it unlocks the Queue.
This sort of DIY locking is a non-starter of course, just let the
TX completion path block on the spinlock when necessary. If that ends up
causing additional latency due to lock contention, then converting
the OSA path to use xmit_more is the right way to go forward.
Also slightly expand the locked section and capture all of
qeth_do_send_packet(), so that the update for the 'bufs_pack' statistics
is done race-free.
While reworking the TX completion path's code, remove a barrier() that
doesn't make any sense.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Huu Le [Thu, 27 Aug 2020 02:56:51 +0000 (09:56 +0700)]
tipc: fix use-after-free in tipc_bcast_get_mode
Syzbot has reported those issues as:
==================================================================
BUG: KASAN: use-after-free in tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759
Read of size 1 at addr ffff88805e6b3571 by task kworker/0:6/3850
CPU: 0 PID: 3850 Comm: kworker/0:6 Not tainted 5.8.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Fix it by calling flush_scheduled_work() to make sure the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+6ea1f7a8df64596ef4d7@syzkaller.appspotmail.com Reported-by: syzbot+e9cc557752ab126c1b99@syzkaller.appspotmail.com Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Move MDIO drivers into their own directory
The phy subdirectory is getting cluttered. It has both PHY drivers and
MDIO drivers, plus a stray switch driver. Soon more PCS drivers are
likely to appear.
Move MDIO and PCS drivers into new directories. This requires fixing
up the xgene driver which uses a relative include path.
v2:
Move the subdirs to drivers/net, rather than drivers/net/phy.
v3:
Add subdirectories under include/linux for mdio and pcs
v4:
there->their
include path fix
No new kconfig prompts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:31 +0000 (04:00 +0200)]
net: mdio: Move MDIO drivers into a new subdirectory
Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.
Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.
v2:
Fix typo in commit message
Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:30 +0000 (04:00 +0200)]
net: xgene: Move shared header file into include/linux
This header file is currently included into the ethernet driver via a
relative path into the PHY subsystem. This is bad practice, and causes
issues for the upcoming move of the MDIO driver. Move the header file
into include/linux to clean this up.
v2:
Move header to include/linux/mdio
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:29 +0000 (04:00 +0200)]
net/phy/mdio-i2c: Move header file to include/linux/mdio
In preparation for moving all MDIO drivers into drivers/net/mdio, move
the mdio-i2c header file into include/linux/mdio so it can be used by
both the MDIO driver and the SFP code which instantiates I2C MDIO
busses.
v2:
Add include/linux/mdio
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 27 Aug 2020 02:00:28 +0000 (04:00 +0200)]
net: pcs: Move XPCS into new PCS subdirectory
Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs
Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.
v2:
Add include/linux/pcs
v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts
Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
James Prestwood [Mon, 13 Apr 2020 16:20:53 +0000 (09:20 -0700)]
nl80211: fix PORT_AUTHORIZED wording to reflect behavior
The CMD_PORT_AUTHORIZED event was described as an event which indicated
a successfully completed 4-way handshake. But the behavior was
not as advertized. The only driver which uses this is brcmfmac, and
this driver only sends the event after a successful 802.1X-FT roam.
This prevents userspace applications from knowing if the 4-way completed
on:
1. Normal 802.1X connects
2. Normal PSK connections
3. FT-PSK roams
wpa_supplicant handles this incorrect behavior by just completing
the connection after association, before the 4-way has completed.
If the 4-way ends up failing it disconnects at that point.
Since this behavior appears to be expected (wpa_s handles it this
way) I have changed the wording in the API description to reflect the
actual behavior.
Markus Theil [Mon, 3 Aug 2020 14:43:53 +0000 (16:43 +0200)]
cfg80211: add helper fn for adjacent rule channels
Some usable channels are located in the union of adjacent
regulatory rules, for example channel 144 in Germany.
Enable them, by also checking if a channel spans two adjacent
regulatory rules/frequency ranges.
All flags involved are disabling things, therefore we can build
the maximum by or-ing them together. Furthermore, take the maximum
of DFS CAC time values and the minimum of allowed power of both
adjacent channels in order to comply with both regulatory rules at
the same time.
Johannes Berg [Wed, 19 Aug 2020 06:56:43 +0000 (08:56 +0200)]
nl80211: use NLA_POLICY_RANGE(NLA_BINARY, ...) for a few attributes
We have a few attributes with minimum and maximum lengths that are
not the same, use the new feature of being able to specify both in
the policy to validate them, removing code and allowing this to be
advertised to userspace in the policy export.
Johannes Berg [Wed, 5 Aug 2020 13:47:16 +0000 (15:47 +0200)]
nl80211: clean up code/policy a bit
Use the policy to validate minimum and exact lengths in
some attributes that weren't previously covered in the
right ways, and remove associated validation code.
Randy Dunlap [Sat, 22 Aug 2020 23:19:53 +0000 (16:19 -0700)]
net: wireless: wext_compat.c: delete duplicated word
Drop the repeated word "be".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-8-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:52 +0000 (16:19 -0700)]
net: wireless: sme.c: delete duplicated word
Drop the repeated word "is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-7-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:51 +0000 (16:19 -0700)]
net: wireless: scan.c: delete or fix duplicated words
Drop repeated word "stored".
Change "is is" to "it is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:50 +0000 (16:19 -0700)]
net: wireless: reg.c: delete duplicated words + fix punctuation
Drop duplicated words "was" and "does".
Fix "let's" apostrophe.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-5-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:49 +0000 (16:19 -0700)]
net: wireless: delete duplicated word + fix grammar
Drop the repeated word "Return" + fix verb.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-4-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:48 +0000 (16:19 -0700)]
net: mac80211: mesh.h: delete duplicated word
Drop the repeated word "address".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-3-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Randy Dunlap [Sat, 22 Aug 2020 23:19:47 +0000 (16:19 -0700)]
net: mac80211: agg-rx.c: fix duplicated words
Change "If if" to "If it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-2-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This series constifies a number of static ops variables, to allow the
compiler to put them in read-only memory. Compile-tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:08 +0000 (00:56 +0200)]
net: ath11k: constify ath11k_thermal_ops
The only usage of ath11k_thermal_ops is to pass its address to
thermal_cooling_device_register() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The only usage of vsc8584_macsec_ops is to assign its address to the
macsec_ops field in the phydev struct, which is a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:06 +0000 (00:56 +0200)]
net: phy: at803x: constify static regulator_ops
The only usage of vddio_regulator_ops and vddh_regulator_ops is to
assign their address to the ops field in the regulator_desc struct,
which is a const pointer. Make them const to allow the compiler to
put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:05 +0000 (00:56 +0200)]
net: renesas: sh_eth: constify bb_ops
The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:04 +0000 (00:56 +0200)]
net: ethernet: ravb: constify bb_ops
The only usage of bb_ops is to assign its address to the ops field in
the mdiobb_ctrl struct, which is a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn [Wed, 26 Aug 2020 22:56:03 +0000 (00:56 +0200)]
net: ethernet: qualcomm: constify qca_serdev_ops
The only usage of qca_serdev_ops is to pass its address to
serdev_device_set_client_ops() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 23:11:39 +0000 (16:11 -0700)]
Merge branch 'refactoring-of-ibmvnic-code'
Lijun Pan says:
====================
refactoring of ibmvnic code
This patch series refactor reset_init and init functions,
and make some other cosmetic changes to make the code
easier to read and debug. v2 removes __func__ and v1's 1/5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Wed, 19 Aug 2020 22:52:26 +0000 (17:52 -0500)]
ibmvnic: merge ibmvnic_reset_init and ibmvnic_init
These two functions share the majority of the code, hence merge
them together. In the meanwhile, add a reset pass-in parameter
to differentiate them. Thus, the code is easier to read and to tell
the difference between reset_init and regular init.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Wed, 19 Aug 2020 22:52:24 +0000 (17:52 -0500)]
ibmvnic: improve ibmvnic_init and ibmvnic_reset_init
When H_SEND_CRQ command returns with H_CLOSED, it means the
server's CRQ is not ready yet. Instead of resetting immediately,
we wait for the server to launch passive init.
ibmvnic_init() and ibmvnic_reset_init() should also return the
error code from ibmvnic_send_crq_init() call.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 23:00:51 +0000 (16:00 -0700)]
Merge branch 'ipv4-nexthop-Various-improvements'
Ido Schimmel says:
====================
ipv4: nexthop: Various improvements
This patch set contains various improvements that I made to the nexthop
object code while studying it towards my upcoming changes.
While patches #4 and #6 fix bugs, they are not regressions (never
worked). They also do not occur to me as critical issues, which is why I
am targeting them at net-next.
Ido Schimmel [Wed, 26 Aug 2020 16:48:57 +0000 (19:48 +0300)]
selftests: fib_nexthops: Test IPv6 route with group after replacing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 21
Tests failed: 1
Output with previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 22
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:56 +0000 (19:48 +0300)]
ipv4: nexthop: Correctly update nexthop group when replacing a nexthop
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is replaced. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 10 group 1
# ip nexthop replace id 1 via 2001:db8:1::2 dev dummy10
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by iterating over all the nexthop groups that the replaced
nexthop is a member of and potentially update their IPv4 indication
according to the new set of member nexthops.
Avoid wasting cycles by only performing the update in case an IPv4
nexthop is replaced by an IPv6 nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:55 +0000 (19:48 +0300)]
selftests: fib_nexthops: Test IPv6 route with group after removing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 18
Tests failed: 1
Output with previous patch:
bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 19
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:54 +0000 (19:48 +0300)]
ipv4: nexthop: Correctly update nexthop group when removing a nexthop
Each nexthop group contains an indication if it has IPv4 nexthops
('has_v4'). Its purpose is to prevent IPv6 routes from using groups with
IPv4 nexthops.
However, the indication is not updated when a nexthop is removed. This
results in the kernel wrongly rejecting IPv6 routes from pointing to
groups that only contain IPv6 nexthops. Example:
# ip nexthop replace id 1 via 192.0.2.2 dev dummy10
# ip nexthop replace id 2 via 2001:db8:1::2 dev dummy10
# ip nexthop replace id 10 group 1/2
# ip nexthop del id 1
# ip route replace 2001:db8:10::/64 nhid 10
Error: IPv6 routes can not use an IPv4 nexthop.
Solve this by updating the indication according to the new set of
member nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:52 +0000 (19:48 +0300)]
ipv4: nexthop: Use nla_put_be32() for NHA_GATEWAY
The code correctly uses nla_get_be32() to get the payload of the
attribute, but incorrectly uses nla_put_u32() to add the attribute to
the payload. This results in the following warning:
net/ipv4/nexthop.c:279:59: warning: incorrect type in argument 3 (different base types)
net/ipv4/nexthop.c:279:59: expected unsigned int [usertype] value
net/ipv4/nexthop.c:279:59: got restricted __be32 [usertype] ipv4
Suppress the warning by using nla_put_be32().
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 22:55:54 +0000 (15:55 -0700)]
Merge branch 'net_prefetch-API'
Tariq Toukan says:
====================
net_prefetch API
This patchset adds a common net API for L1 cacheline size-aware prefetch.
Patch 1 introduces the common API in net and aligns the drivers to use it.
Patches 2 and 3 add usage in mlx4 and mlx5 Eth drivers.
Series generated against net-next commit: 079f921e9f4d Merge tag 'batadv-next-for-davem-20200824' of git://git.open-mesh.org/linux-merge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:18 +0000 (15:54 +0300)]
net/mlx4_en: RX, Add a prefetch command for small L1_CACHE_BYTES
A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:17 +0000 (15:54 +0300)]
net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES
A single cacheline might not contain the packet header for
small L1_CACHE_BYTES values.
Use net_prefetch() as it issues an additional prefetch
in this case.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 26 Aug 2020 12:54:16 +0000 (15:54 +0300)]
net: Take common prefetch code structure into a function
Many device drivers use the same prefetch code structure to
deal with small L1 cacheline size.
Take this code into a function and call it from the drivers.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Add Ethernet support for Intel Keem Bay SoC
This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation,
while the second patch adds the Intel platform glue layer for the stmmac
device driver.
This driver was tested on the Keem Bay evaluation module board.
Changes since v2:
-Add a select in DT documentation to avoid matching with all nodes containing 'snps,dwmac'
-Rebased to 5.9-rc1
Changes since v1:
-Removed clocks maxItems property from DT bindings documentation
-Removed phy compatible strings from DT bindings documentation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add dwmac-intel-plat to enable the stmmac driver in Intel Keem Bay.
Also add fix_mac_speed and tx_clk in order to change link speeds.
This is required as mac_speed_o is not connected in the
Intel Keem Bay SoC.
Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Miaohe Lin [Tue, 25 Aug 2020 11:33:22 +0000 (07:33 -0400)]
net: Set ping saddr after we successfully get the ping port
We can defer set ping saddr until we successfully get the ping port. So we
can avoid clear saddr when failed. Since ping_clear_saddr() is not used
anymore now, remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Rangoju [Tue, 25 Aug 2020 03:55:46 +0000 (09:25 +0530)]
cxgb4: add error handlers to LE intr_handler
cxgb4 does not look for HASHTBLMEMCRCERR and CMDTIDERR
bits in LE_DB_INT_CAUSE register, but these are enabled
in LE_DB_INT_ENABLE. So, add error handlers to LE
interrupt handler to emit a warning or alert message
for hash table mem crc and cmd tid errors
Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 25 Aug 2020 01:15:45 +0000 (18:15 -0700)]
Merge branch 'Add-PTP-support-for-Octeontx2'
Subbaraya Sundeep says:
====================
Add PTP support for Octeontx2
This patchset adds PTP support for Octeontx2 platform.
PTP is an independent coprocessor block from which
CGX block fetches timestamp and prepends it to the
packet before sending to NIX block. Patches are as
follows:
Patch 1: Patch to enable/disable packet timstamping
in CGX upon mailbox request. It also adjusts
packet parser (NPC) for the 8 bytes timestamp
appearing before the packet.
Patch 2: Patch adding PTP pci driver which configures
the PTP block and hooks up to RVU AF driver.
It also exposes a mailbox call to adjust PTP
hardware clock.
Patch 3: Patch adding PTP clock driver for PF netdev.
v8:
Added missing header file reported by kernel test robot
in patch 2
v7:
As per Jesse Brandeburg comments:
Simplified functions in patch 1
Replaced magic numbers with macros
Added Copyrights
Added code comments wherever required
Modified commit description of patch 2
v6:
Resent after net-next is open
v5:
As suggested by David separated the fix (adding rtnl lock/unlock)
and submitted to net.
https://www.spinics.net/lists/netdev/msg669617.html
v4:
Added rtnl_lock/unlock in otx2_reset to protect against
network stack ndo_open and close calls
Added NULL check after ptp_clock_register in otx2_ptp.c
v3:
Fixed sparse error in otx2_txrx.c
Removed static inlines in otx2_txrx.c
v2:
Fixed kernel build robot reported error by
adding timecounter.h to otx2_common.h
====================
Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksey Makarov [Mon, 24 Aug 2020 15:50:01 +0000 (21:20 +0530)]
octeontx2-af: Add support for Marvell PTP coprocessor
Precision Timestamping block found on Octeontx2
platform is an independent coprocessor and has
internal PTP hardware clock. Once configured PTP
runs independently and when a packet arrives
CGX hardware block gets the current timestamp
from PTP block and forwards the packet to NIX
by prepending timestamp to the packet.
This patch adds the pci driver for PTP block.
The driver gets registered by AF driver and does
initial configuration and exposes a mailbox function to
read and adjust PTP hardware clock. The mailbox function
is called by AF consumers like netdev drivers or
userspace drivers. Since PTP being a single block
in platform this driver helps in accessing PTP
block by any AF consumer.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Zyta Szpak [Mon, 24 Aug 2020 15:50:00 +0000 (21:20 +0530)]
octeontx2-af: Support to enable/disable HW timestamping
Four new mbox messages ids and handler are added in order to
enable or disable timestamping procedure on tx and rx side.
Additionally when PTP is enabled, the packet parser must skip
over 8 bytes and start analyzing packet data there. To make NPC
profiles work seemlesly PTR_ADVANCE of IKPU is set so that
parsing can be done as before when all data pointers
are shifted by 8 bytes automatically.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Zyta Szpak <zyta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This is an implementation of devlink health infrastructure.
With this we are now able to report HW errors to devlink, and it'll take
its own actions depending on user configuration to capture and store the
dump at the bad moment, and to request the driver to recover the device.
So far we do not differentiate global device failures or specific PCI
function failures. This means that some errors specific to one physical
function will affect an entire device. This is not yet fully designed
and verified, will followup in future.
Solution was verified with artificial HW errors generated, existing
tools for dump analysis could be used.
v7: comments from Jesse and Jakub
- p2: extra edev check
- p9: removed extra indents
v6: patch 4: changing serial to board.serial and fw to fw.app
v5: improved patch 4 description
v4:
- commit message and other fixes after Jiri's comments
- removed one patch (will send to net)
v3: fix uninit var usage in patch 11
v2: fix #include issue from kbuild test robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:34 +0000 (14:19 +0300)]
qede: make driver reliable on unload after failures
In case recovery was not successful, netdev still should be
present. But we should clear cdev if something bad happens
on recovery.
We also check cdev for null on dev close. That could be a case
if recovery was not successful.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:33 +0000 (14:19 +0300)]
qed: align adjacent indent
Remove extra indent on some of adjacent declarations.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:32 +0000 (14:19 +0300)]
qed: implement devlink dump
Gather and push out full device dump to devlink.
Device dump is the same as with `ethtool -d`, but now its generated
exactly at the moment bad thing happens.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:31 +0000 (14:19 +0300)]
qed*: make use of devlink recovery infrastructure
Remove forcible recovery trigger and put it as a normal devlink
callback.
This allows user to enable/disable it via
devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:30 +0000 (14:19 +0300)]
qed: use devlink logic to report errors
Use devlink_health_report to push error indications.
We implement this in qede via callback function to make it possible
to reuse the same for other drivers sitting on top of qed in future.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:29 +0000 (14:19 +0300)]
qed: health reporter init deinit seq
Here we declare health reporter ops (empty for now)
and register these in qed probe and remove callbacks.
This way we get devlink attached to all kind of qed* PCI
device entities: networking or storage offload entity.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:28 +0000 (14:19 +0300)]
qed: implement devlink info request
Here we return existing fw & mfw versions, we also fetch device's
serial number:
~$ sudo ~/iproute2/devlink/devlink dev info
pci/0000:01:00.1:
driver qed
board.serial_number REE1915E44552
versions:
running:
fw.app 8.42.2.0
stored:
fw.mgmt 8.52.10.0
MFW and FW are different firmwares on device.
Management is a firmware responsible for link configuration and
various control plane features. Its permanent and resides in NVM.
Running FW (or fastpath FW) is an embedded microprogram implementing
all the packet processing, offloads, etc. This FW is being loaded
on each start by the driver from FW binary blob.
The base device specific structure (qed_dev_info) was not directly
available to the base driver before. Thus, here we create and store
a private copy of this structure in qed_dev root object to
access the data.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:27 +0000 (14:19 +0300)]
qed: fix kconfig help entries
This patch replaces stubs in kconfig help entries with an actual description.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:26 +0000 (14:19 +0300)]
qed/qede: make devlink survive recovery
Devlink instance lifecycle was linked to qed_dev object,
that caused devlink to be recreated on each recovery.
Changing it by making higher level driver (qede) responsible for its
life. This way devlink now survives recoveries.
qede now stores devlink structure pointer as a part of its device
object, devlink private data contains a linkage structure,
qed_devlink.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sun, 23 Aug 2020 11:19:25 +0000 (14:19 +0300)]
qed: move out devlink logic into a new file
We are extending devlink infrastructure, thus move the existing
stuff into a new file qed_devlink.c
Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'free_rx_resources()' and
'alloc_tx_resources()' (sge.c) GFP_KERNEL can be used because it is
already used in these functions.
Moreover, they can only be called from a .ndo_open function. So it is
guarded by the 'rtnl_lock()', which is a mutex.
While at it, a pr_err message in 'init_one()' has been updated accordingly
(s/consistent/coherent).
David S. Miller [Tue, 25 Aug 2020 00:36:11 +0000 (17:36 -0700)]
Merge branch 'mlxsw-Misc-updates'
Ido Schimmel says:
====================
mlxsw: Misc updates
This patch set includes various updates for mlxsw.
Patches #1-#4 adjust the default burst size of packet trap policers to
conform to Spectrum-{2,3} requirements. The corresponding selftest is
also adjusted so that it could reliably pass on these platforms.
Patch #5 adjusts a selftest so that it could pass with both old and new
versions of mausezahn.
Patch #6 significantly reduces the runtime of tc-police scale test by
changing the preference and masks of the used tc filters.
Patch #7 prevents the driver from trying to set invalid ethtool link
modes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Sun, 23 Aug 2020 08:06:28 +0000 (11:06 +0300)]
mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register
The PTYS register is used to report and configure the port type and
speed. Currently, internal bits in the register are used the same way
other bits are used.
Using the internal bits can cause bad parameter firmware errors. For
example, trying to write to internal bit 25 returns:
projects / mirror_ubuntu-kernels.git / log