Renato Westphal [Wed, 7 Dec 2016 15:21:46 +0000 (13:21 -0200)]
*: always set SO_SNDBUF and SO_RCVBUF using a best effort approach
If we fail to set any socket's buffer size, try again with a smaller value
and keep going until it succeeds. This is better than just giving up or,
even worse, abort the creation of a socket (ospf6d and ripd).
Fix broken ospf6d on FreeBSD.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renato Westphal [Wed, 7 Dec 2016 15:21:45 +0000 (13:21 -0200)]
ospfd: set the OSPF socket's send buffer size only once
This reverts commit b7fe4141, which introduced a logic where the OSPF
send buffer size was dynamically updated to reflect the maximum MTU
of the OSPF enabled interfaces (this was done to make ospfd work with
interfaces configured for jumbo frames).
Since commit a78d75b0, this is not necessary anymore because
ospf_sock_init() now sets the OSPF send buffer size to a very high value
(8MB). Also, the previous logic was broken because it didn't account
for run-time interface MTU changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Thu, 1 Dec 2016 15:49:22 +0000 (10:49 -0500)]
lib, zebra: Minimize display of link-params sub data
When link-params is configured it auto starts displaying
6000-02# conf t
dell-s6000-02(config)# int swp1
dell-s6000-02(config-if)# link-params
dell-s6000-02(config-link-params)# admin-grp 0x12345678
dell-s6000-02(config-link-params)# end
dell-s6000-02# show run
vivek [Sun, 4 Dec 2016 02:51:49 +0000 (21:51 -0500)]
bgpd: Remove nexthop for peer only for "real" peer
During connection establishment, there is a separate peer structure created
for the doppelganger (for incoming connection). When this is deleted after
the connection has established, take care to ensure that the nexthop entry
for the peer is not deleted.
Quentin Young [Fri, 2 Dec 2016 21:02:51 +0000 (21:02 +0000)]
lib: make CLI completions less surprising
* If a token matches exactly at the end of input, it still
shows up in completions, e.g.
ex# clear<?>
clear Reset functions
ex(config)# ip route 1.2.3.4<?>
A.B.C.D IP destination prefix
A.B.C.D/M IP destination prefix (e.g. 10.0.0.0/8)
* If a token in mid-line exactly matches one token and
partially matches on one or more additional tokens,
the command tree(s) under the partially matching tokens
will be ignored in favor of the exact match when compiling
completions for the full line, e.g.
ex(config)# ip <?>
will only show completions for commands under 'ip' and not
those under 'ipv6', which the input partially matches.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
vivek [Fri, 2 Dec 2016 13:22:21 +0000 (08:22 -0500)]
bgpd: Fix route node unlock when clearing adj-out
When clearing the adj-out for a subgroup (e.g., upon peer going down),
ensure that the adj-out is removed before unlocking the route node that
it points to, otherwise, there is a possibility that the route node may
be prematurely freed.
Donald Sharp [Fri, 2 Dec 2016 13:19:26 +0000 (08:19 -0500)]
ospfd: Fix json Crash with inactive timer
When nbr->t_inactivity is not active, and
you do a show json over the neighbor it
will crash ospfd. Fix the code so it
prints out -1 when the timer is inactive.
Ticket:CM-13835 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Reviewed-by: Don Slice <dslice@cumulusnetworks.com> Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
(cherry picked from commit 78d8fcb9623ab4d9cebf6187a451448e056a84bf) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Wed, 16 Nov 2016 06:03:51 +0000 (15:03 +0900)]
lib: parser: use reentrant mode on flex & bison
This removes remaining global variables from the lexer, pushing the
lexer state into struct parser_ctx too. At the same time, "cmd_yy" is
used as prefix for all parser & lexer routines.
The result is that (a) there is no collision anymore if a program uses
flex/bison and links libzebra, and (b) the parser is fully encapsulated
and could be called in parallel from multiple threads.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Wed, 23 Nov 2016 08:02:08 +0000 (09:02 +0100)]
lib: parser: wrap state in struct parser_ctx
This encapsulates all parser state into a new "struct parser_ctx", which
is allocated on stack and passed around as pointer. The parser no
longer has any global variables with this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Wed, 23 Nov 2016 07:42:27 +0000 (08:42 +0100)]
lib: move command_parse_format prototype
The function prototype for command_parse_format() is better left in
command.h, so that the bison-generated header file doesn't need to be
included for that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Wed, 16 Nov 2016 06:00:52 +0000 (15:00 +0900)]
*: make DEFUN installations file-local
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Thu, 1 Dec 2016 16:18:57 +0000 (17:18 +0100)]
lib: replace MIT license with ISC
Since other parts (e.g. ldpd) use the ISC license, and the ISC license
is just a simplified form of the MIT license, just move things over and
reduce the number of different licenses we have in use here.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renato Westphal [Mon, 28 Nov 2016 18:47:13 +0000 (16:47 -0200)]
bgpd: fix invalid memory access in peer_free()
We shoult not call bgp_unlock() before calling
bgp_delete_connected_nexthop() in the peer_free() function. Otherwise,
if bgp->lock reaches zero, bgp_free() is called and peer->bgp becomes
an invalid pointer in the bgp_delete_connected_nexthop() function.
To fix this, move the call to bgp_unlock() to the end of peer_free().
Bug exposed by commit 37d361e ("bgpd: plug several memleaks").
Signed-off-by: Renato Westphal <renato@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Thu, 1 Dec 2016 14:11:12 +0000 (09:11 -0500)]
bgpd: Fix crashes when no default bgp instance is configured.
The vnc code assumes that bgp must have a default instance.
This code change checks to make sure that we do before
proceeding. It makes no assurances that vnc will behave
correctly without a default instance.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Wed, 30 Nov 2016 13:23:12 +0000 (08:23 -0500)]
pimd: Fix large integer display of drpriority
When displaying drpriority you can enter unsigned
integer values from 1-2^32. The display was
turning the unsigned value into a signed value
and thus we were displaying the wrong value.
Ticket: CM-13787 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
(cherry picked from commit db17265f1025e3ec578998ad537c33b49ed33cde) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Wed, 30 Nov 2016 13:23:11 +0000 (08:23 -0500)]
ospfd: Fix memory leak when not using json
When doing a show command under ospf, if
not using json we would have a small memory
leak in show_ip_ospf_common.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 50750712b1ac8364e290c67782eaf371025dc59e) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Quentin Young [Tue, 29 Nov 2016 20:25:24 +0000 (20:25 +0000)]
bgpd: Add back missing vpnv4 commands
* show ip bgp vpnv4 all <A.B.C.D|A.B.C.D/M> [json]
* show...vpnv4 <all|rd ...> summary...
* Fix placement of AF+SAFI specifiers for BGP clear commands
* Add more [ip]'s for bgp commands
* clean up some doc strings
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Daniel Walton [Tue, 29 Nov 2016 17:47:12 +0000 (12:47 -0500)]
bgpd: fix "show ip bgp" column alignment
The "Weight" column is off:
BGP table version is 0, local router ID is 10.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, =
multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 4.1.1.2/32 9.9.9.2 0 32768 ?
*> 4.1.1.4/32 9.9.9.2 0 32768 ?
Displayed 2 out of 2 total prefixes
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 65c7395b07e8c592c847d4a1e22fc89ddf448341) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-13712
(cherry picked from commit 367b138748e894bbfaae36d1cf7c90eafebfebc9) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renato Westphal [Mon, 28 Nov 2016 20:35:36 +0000 (18:35 -0200)]
isisd: use a smaller #ifdef for isis_receive()
There's no need to provide two definitions of the isis_receive()
function (one for GNU_LINUX and the other for !GNU_LINUX). Both differ
only slightly so it makes more sense to define isis_receive() just once
and use a smaller #ifdef to account for these differences. This improves
code readability.
Renato Westphal [Mon, 28 Nov 2016 17:00:05 +0000 (15:00 -0200)]
bgpd: fix invalid memory access in peer_free()
We shoult not call bgp_unlock() before calling
bgp_delete_connected_nexthop() in the peer_free() function. Otherwise,
if bgp->lock reaches zero, bgp_free() is called and peer->bgp becomes
an invalid pointer in the bgp_delete_connected_nexthop() function.
To fix this, move the call to bgp_unlock() to the end of peer_free().
Bug exposed by commit 37d361e ("bgpd: plug several memleaks").
Renato Westphal [Sun, 30 Oct 2016 21:50:26 +0000 (19:50 -0200)]
zebra/lib: remove redundant fields from zebra_vrf
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Renato Westphal [Sun, 30 Oct 2016 00:44:06 +0000 (22:44 -0200)]
lib/zebra: put vrf_get() on a diet
Also, for some reason we had two functions to search a VRF by its name:
zebra_vrf_lookup_by_name() and zebra_vrf_list_lookup_by_name(). The first
one would loop through vrf_table and the other one through vrf_list. This
is not necessary anymore, so remove zebra_vrf_lookup_by_name() and rename
zebra_vrf_list_lookup_by_name() to zebra_vrf_lookup_by_name().
Renato Westphal [Sat, 29 Oct 2016 01:03:35 +0000 (23:03 -0200)]
lib: convert namespace code to use red-black trees
We definitely need to stop abusing the route table data structure when
it's not necessary. Convert the namespace code to use red-black trees
instead. This greatly improves code readability.
Renato Westphal [Fri, 28 Oct 2016 18:53:38 +0000 (16:53 -0200)]
lib: fix creation of pre-provisioned VRFs
If we configure a VRF that doesn't match any device in the kernel, we'll
fall in the first case of the vrf_get() function. In this function,
a vrf structure is callocated and it's vrf_id is never set explicitly,
which means it's set to zero (the vrf-id of the default VRF). When this
happens, commands like "router-id A.B.C.D vrf ..." will act on the
default VRF and not on the pre-provisioned VRF. To fix this, always
set the vrf_id of pre-provisioned VRFs to VRF_UNKNOWN.
Renato Westphal [Sat, 29 Oct 2016 00:32:07 +0000 (22:32 -0200)]
zebra/lib: move some code around
* move netlink code from zebra_nc.c to kernel_netlink.c;
* move vrf CLI commands from if.c/interface.c to vrf.c/zebra_vrf.c;
* move declaration of the 'ns' structure to a header file.
projects / mirror_frr.git / log