This fixes up the .mode_valid() vtable entry documentation
by copyediting the documentation from the .mode_valid()
documentation in the drm_modeset_helper_vtables.h file.
Shirish S [Wed, 7 Mar 2018 03:10:03 +0000 (08:40 +0530)]
drm/atomic: Add new reverse iterator over all plane state (V2)
Add reverse iterator for_each_oldnew_plane_in_state_reverse to
compliment the for_each_oldnew_plane_in_state way or reading plane
states.
The plane states are required to be read in reverse order for
amd drivers, cause the z order convention followed in linux is
opposite to how the planes are supposed to be presented to DC
engine, which is in common to both windows and linux.
Ville Syrjälä [Tue, 6 Mar 2018 16:48:49 +0000 (18:48 +0200)]
drm: Reject bad property flag combinations
Pimp drm_property_type_valid() to check for more fails with the
property flags. Also make the check before adding the property,
and bail out if things look bad.
Since we're now chekcing for more than the type let's also
change the function name to drm_property_flags_valid().
Ville Syrjälä [Tue, 6 Mar 2018 16:48:47 +0000 (18:48 +0200)]
drm/uapi: Deprecate DRM_MODE_PROP_PENDING
DRM_MODE_PROP_PENDING is not used anywhere (except printed out
by libdrm proptest/modetest).
This seems to be yet another thing blindly copied from xrandr.
Quoting from the protocol spec:
"If 'pending' is TRUE, changes made to property values with
RRChangeOutputProperty will be saved in the pending property value
and be automatically copied to the current value on the next
RRSetCrtcConfig request involving the named output. If 'pending' is
FALSE, changes are copied immediately."
So it was some kind of early idea for atomic property updates.
If there is another bridge after analogix_dp, then the connector object
should not be created. This fixes following timeouts on Exynos5420-based
Chromebook2 Peach-PIT board during boot:
exynos-dp 145b0000.dp-controller: AUX CH cmd reply timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
This oops happens, because analogix_dp_bind() calls drm_dp_aux_register()
which registers i2c adapter. I2C core tries to runtime get i2c host
device during registration. This ends in analogix_dp_resume(), but dp
context is NULL there. dp context is set in exynos_dp_bind() after
executing analogix_dp_bind(). Fix this issue by postponing enabling runtime
power management after drm_dp_aux_register().
zain wang [Mon, 5 Mar 2018 08:57:39 +0000 (09:57 +0100)]
drm/bridge: analogix_dp: Don't power bridge in analogix_dp_bind
The bridge does not need to be powered in analogix_dp_bind(), so
remove the calls to pm_runtime_get()/phy_power_on()/analogix_dp_init_dp()
as well as their power-off counterparts.
Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
[the patch originally just removed the power_on portion, seanpaul removed
the power off code as well as improved the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-2-m.szyprowski@samsung.com
Ville Syrjälä [Fri, 2 Mar 2018 14:03:00 +0000 (16:03 +0200)]
drm: Check property/enum name length
Reject requests to add properties/enums with an overly long name.
Previously we would have just silently truncated the string and exposed
it userspace.
The Amlogic Meson GX SoCs, embedded the v2.01a controller, has been also
identified needing this workaround.
This patch adds the corresponding version to enable a single iteration for
this specific version.
Joe Moriarty [Tue, 20 Feb 2018 19:11:57 +0000 (14:11 -0500)]
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer dereference problem.
- drivers/gpu/drm/drm_drv.c
Any calls to drm_minor_get_slot() could result in the return of a NULL
pointer when an invalid DRM device type is encountered. The
return of NULL was removed with BUG() from drm_minor_get_slot().
Joe Moriarty [Tue, 20 Feb 2018 19:11:56 +0000 (14:11 -0500)]
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.
- drivers/gpu/drm/drm_vblank.c
Null pointer checks were added to return values from calls to
drm_crtc_from_index(). There is a possibility, however minute, that
crtc->index may not be found when trying to find the struct crtc
from it's assigned index given in drm_crtc_init_with_planes().
3 return checks for NULL where added with a call to
WARN_ON(!crtc).
Ville Syrjälä [Tue, 23 Jan 2018 17:08:55 +0000 (19:08 +0200)]
drm/armada: Construct a temporary crtc state for plane checks
As armada isn't an atomic driver trying to pass a non-populated
crtc->state to drm_atomic_helper_check_plane_state() will end in tears.
Construct a temporary crtc state a la drm_plane_helper_check_update()
and pass that instead. For now we just really need crtc_state->enable
to be there.
Daniel Stone [Tue, 8 Aug 2017 16:44:48 +0000 (17:44 +0100)]
drm/vc4: Advertise supported modifiers for planes
The IN_FORMATS blob allows the kernel to advertise to userspace which
format/modifier combinations are supported, per plane. Use this to
advertise that we support both T_TILED and linear.
v2:
- Only advertise T_TILED for RGB (Eric)
- Actually turn on allow_fb_modifiers (Eric)
Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/170828/
Ville Syrjälä [Wed, 14 Feb 2018 19:23:27 +0000 (21:23 +0200)]
drm/i915: Add support for the YCbCr COLOR_RANGE property
Add support for the COLOR_RANGE property on planes. This property
selects whether the input YCbCr data is to treated as limited range
or full range.
On most platforms this is a matter of setting the "YUV range correction
disable" bit, and on VLV/CHV we'll just have to program the color
correction logic to pass the data through unmodified.
v2: Rebase
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-9-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 14 Feb 2018 19:23:26 +0000 (21:23 +0200)]
drm/i915: Change the COLOR_ENCODING prop default value to BT.709
Bring us forward from the stone age and switch our default YCbCr->RGB
conversion matrix to BT.709 from BT.601. I would expect most matrial
to be BT.709 these days.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Acked-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-8-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 14 Feb 2018 19:23:25 +0000 (21:23 +0200)]
drm/i915: Add support for the YCbCr COLOR_ENCODING property
Add support for the COLOR_ENCODING plane property which selects
the matrix coefficients used for the YCbCr->RGB conversion. Our
hardware can generally handle BT.601 and BT.709.
CHV pipe B sprites have a fully programmable matrix, so in theory
we could handle anything, but it doesn't seem all that useful to
expose anything beyond BT.601 and BT.709 at this time.
GLK can supposedly do BT.2020, but let's leave enabling that for
the future as well.
v2: Rename bit defines to match the spec more closely (Shashank)
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 14 Feb 2018 19:23:24 +0000 (21:23 +0200)]
drm/i915: Fix plane YCbCr->RGB conversion for GLK
On GLK the plane CSC controls moved into the COLOR_CTL register.
Update the code to progam the YCbCr->RGB CSC mode correctly when
faced with an YCbCr framebuffer.
The spec is rather confusing as it calls the mode "YUV601 to RGB709".
I'm going to assume that just means it's going to use the YCbCr->RGB
matrix as specified in BT.601 and doesn't actually change the gamut.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-6-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Wed, 14 Feb 2018 19:23:23 +0000 (21:23 +0200)]
drm/i915: Correctly handle limited range YCbCr data on VLV/CHV
Turns out the VLV/CHV fixed function sprite CSC expects full range
data as input. We've been feeding it limited range data to it all
along. To expand the data out to full range we'll use the color
correction registers (brightness, contrast, and saturation).
On CHV pipe B we were actually doing the right thing already because we
progammed the custom CSC matrix to do expect limited range input. Now
that well pre-expand the data out with the color correction unit, we
need to change the CSC matrix to operate with full range input instead.
This should make the sprite output of the other pipes match the sprite
output of pipe B reasonably well. Looking at the resulting pipe CRCs,
there can be a slight difference in the output, but as I don't know
the formula used by the fixed function CSC of the other pipes, I don't
think it's worth the effort to try to match the output exactly. It
might not even be possible due to difference in internal precision etc.
One slight caveat here is that the color correction registers are single
bufferred, so we should really be updating them during vblank, but we
still don't have a mechanism for that, so just toss in another FIXME.
v2: Rebase
v3: s/bri/brightness/ s/con/contrast/ (Shashank)
v4: Clarify the constants and math (Shashank)
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Tang, Jun" <jun.tang@intel.com> Reported-by: "Tang, Jun" <jun.tang@intel.com> Cc: stable@vger.kernel.org Fixes: 7f1f3851feb0 ("drm/i915: sprite support for ValleyView v4") Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Mon, 19 Feb 2018 20:28:46 +0000 (22:28 +0200)]
drm/atomic: Include color encoding/range in plane state dump
Include color_enconding and color_range in the plane state dump.
v2: Add kerneldoc (danvet)
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202846.10628-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com>
Jyri Sarha [Mon, 19 Feb 2018 20:28:23 +0000 (22:28 +0200)]
drm: Add optional COLOR_ENCODING and COLOR_RANGE properties to drm_plane
Add a standard optional properties to support different non RGB color
encodings in DRM planes. COLOR_ENCODING select the supported non RGB
color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects
the value ranges within the selected color encoding. The properties
are stored to drm_plane object to allow different set of supported
encoding for different planes on the device.
v2: Add/fix kerneldocs, verify bitmasks (danvet)
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
[vsyrjala v2: Add/fix kerneldocs, verify bitmasks] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jernej Skrabec [Thu, 1 Mar 2018 21:34:38 +0000 (22:34 +0100)]
drm/sun4i: Add support for H3 HDMI PHY variant
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.
However, they still have many things in common like clock and reset
setup, setting sync polarity and more.
Add support for H3 HDMI PHY variant.
While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.
Jernej Skrabec [Thu, 1 Mar 2018 21:34:36 +0000 (22:34 +0100)]
drm/sun4i: Add support for variants to DW HDMI PHY
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.
Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.
Jernej Skrabec [Thu, 1 Mar 2018 21:34:35 +0000 (22:34 +0100)]
drm/sun4i: Fix polarity configuration for DW HDMI PHY
Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.
Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.
Jeffy Chen [Thu, 1 Mar 2018 15:25:58 +0000 (16:25 +0100)]
drm/rockchip: analogix_dp: reorder psr_unregister call in unbind
In bind the psr handler gets registered first before the core
analogix_dp_bind() gets called. So it should be the other way
around in unbind, first unbind the analogix_dp and then
unregister the psr.
Jeffy Chen [Wed, 10 Jan 2018 16:23:41 +0000 (17:23 +0100)]
drm/bridge: analogix: Do not use device's drvdata
The driver that instantiates the bridge should own the drvdata, as all
driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also
owned by its driver struct. Moreover, storing two different pointer
types in driver data depending on driver initialization status is barely
a good practice and in fact has led to many bugs in this driver.
Let's clean up this mess and change Analogix entry points to simply
accept some opaque struct pointer, adjusting their users at the same
time to avoid breaking the compilation.
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
Jeffy Chen [Fri, 23 Feb 2018 06:22:50 +0000 (14:22 +0800)]
drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb
and cbcr. So the cbcr's vskiplines might be an unexpected value if the
second scl_vop_cal_scale() didn't update it.
Init vskiplines in scl_vop_cal_scale() to avoid that.
Jeffy Chen [Wed, 7 Feb 2018 17:53:09 +0000 (18:53 +0100)]
drm/rockchip: Add device links for master and components
Since we are trying to access components' resources in the master's
suspend/resume PM callbacks(e.g. panel), add device links to correct
the suspend/resume and shutdown ordering.
Arnd Bergmann [Wed, 28 Feb 2018 13:40:48 +0000 (14:40 +0100)]
tinydrm: add backlight dependency
Calling devm_of_find_backlight directly means we get a link failure
without CONFIG_BACKLIGHT_CLASS_DEVICE:
drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe':
mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight'
This adds an explicit Kconfig dependency for it. While I did not
observe that failure for st7735r, I assume the same change is needed
there for the same reason.
Ville Syrjälä [Thu, 22 Feb 2018 21:42:29 +0000 (23:42 +0200)]
drm/uapi: The ctm matrix uses sign-magnitude representation
The documentation for the ctm matrix suggests a two's complement
format, but at least the i915 implementation is using sign-magnitude
instead. And looks like malidp is doing the same. Change the docs
to match the current implementation, and change the type from __s64
to __u64 to drive the point home.
Cc: dri-devel@lists.freedesktop.org Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Ville Syrjälä [Mon, 26 Feb 2018 14:24:23 +0000 (16:24 +0200)]
drm: Include the header with the prototype for drm_get_panel_orientation_quirk()
sparse complains:
drivers/gpu/drm/drm_panel_orientation_quirks.c:133:5: warning: symbol 'drm_get_panel_orientation_quirk' was not declared. Should it be static?
Ville Syrjälä [Fri, 22 Dec 2017 19:22:31 +0000 (21:22 +0200)]
drm/i915: Remove the pipe/plane ID checks from skl_check_ccs_aux_surface()
The core now checks that the plane supports the fb's format+modifier
combination, so we can drop the related checks from
skl_check_ccs_aux_surface(). These checks were specific to
SKL/KBL/BXT anyway.
Ville Syrjälä [Fri, 22 Dec 2017 19:22:30 +0000 (21:22 +0200)]
drm: Check that the plane supports the request format+modifier combo
Currently we only check that the plane supports the pixel format of the
fb we're about to feed to it. Extend it to check also the modifier, and
more specifically that the combination of the format and modifier is
supported.
Thierry Reding [Tue, 20 Feb 2018 10:29:03 +0000 (11:29 +0100)]
drm/pl111: Remove reverse dependency on DRM_DUMB_VGA_DAC
DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet
direct dependencies such as this (on i386, randconfig):
warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF)
This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not.
It does indirectly depend on OF via the ARM and ARM64 dependencies, but
since it can also be enabled under COMPILE_TEST, randconfig can find a
case where DRM_PL111 is selected without pulling in OF and not meeting
the dependency for DRM_DUMB_VGA_DAC.
Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled
regardless of the above warning and causes the following build error:
../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe':
../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node'
vga->bridge.of_node = pdev->dev.of_node;
See Documentation/kbuild/kconfig-language.txt, "reverse dependencies".
Fixes: 49f81d80ab84 ("drm/pl111: Support handling bridge timings") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Archit Taneja <archit@cradlewise.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com
drm/simple_kms_helper: Add {enable|disable}_vblank callback support
If simple_kms_helper based driver needs to work with vblanks,
then it has to provide drm_driver.{enable|disable}_vblank callbacks,
because drm_simple_kms_helper.drm_crtc_funcs does not provide any.
At the same time drm_driver.{enable|disable}_vblank callbacks
are marked as deprecated and shouldn't be used by new drivers.
Fix this by extending drm_simple_kms_helper.drm_crtc_funcs
to provide the missing callbacks.
Arnd Bergmann [Thu, 22 Feb 2018 11:47:51 +0000 (12:47 +0100)]
drm: fix drm_get_max_iomem type mismatch
When comparing two variables with min()/max(), they should be the same type:
drivers/gpu/drm/drm_memory.c: In function 'drm_get_max_iomem':
include/linux/kernel.h:821:16: error: comparison of distinct pointer types lacks a cast [-Werror]
(void) (&max1 == &max2);
This makes the local variable in drm_get_max_iomem make the type
from resource->end.
drm/simple_kms_helper: Fix NULL pointer dereference with no active CRTC
It is possible that drm_simple_kms_plane_atomic_check called
with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID
to 0 before doing any actual drawing. This leads to NULL pointer
dereference because in this case new CRTC state is NULL and must be
checked before accessing.
Maxime Ripard [Fri, 16 Feb 2018 17:39:36 +0000 (18:39 +0100)]
drm/sun4i: backend: Remove ARGB spoofing
We've had some code for quite some time to prevent the alpha bug from
happening on the lowest primary plane. Since we now check for this in our
atomic_check, we can simply remove it.
Maxime Ripard [Fri, 16 Feb 2018 17:39:33 +0000 (18:39 +0100)]
drm/sun4i: Remove the plane description structure
The plane description structure was mostly needed to differentiate the
formats usable on the primary plane (because of its lowest position), and
assign the pipes. Now that both are dynamically checked and assigned, we
can remove the static definition.
Maxime Ripard [Fri, 16 Feb 2018 17:39:32 +0000 (18:39 +0100)]
drm/sun4i: backend: Assign the pipes automatically
Since we now have a way to enforce the zpos, check for the number of alpha
planes, the only missing part is to assign our pipe automatically instead
of hardcoding it.
The algorithm is quite simple, but requires two iterations over the list of
planes.
In the first one (which is the same one that we've had to check for alpha,
the frontend usage, and so on), we order the planes by their zpos.
We can then do a second iteration over that array by ascending zpos
starting with the pipe 0. When and if we encounter our alpha plane, we put
it and all the other subsequent planes in the second pipe.
Chris Wilson [Tue, 20 Feb 2018 09:37:38 +0000 (09:37 +0000)]
drm/mm: Fix caching of leftmost node in the interval tree
When we descend the tree to find our slot, if we step to the right, we
are no longer the leftmost node.
Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.
Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.
drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have
a generic of_find_backlight defined in backlight.c. Let the callers
of tinydrm_of_find_backlight call of_find_backlight. Also, remove
select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from
tinydrm/Kconfig as it is a hack that is no longer needed.
Sean Paul [Tue, 20 Feb 2018 15:33:04 +0000 (10:33 -0500)]
Merge tag 'topic/backlight_for_lag-2018-01-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
This contains the backlight portion of Meghana Madhyastha's patch set to
migrate the backlight helpers from tinydrm to the backlight subsystem.
https://patchwork.freedesktop.org/series/36522/
Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
# gpg: Signature made Mon 29 Jan 2018 02:25:40 PM EST
# gpg: using RSA key 7F17297CC4A076740CB3E42A96F70DFDA84A070A
# gpg: Good signature from "Sean Paul <seanpaul@chromium.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C5E AB9E D7C9 DDE9 E7F2 087C 732C 0025 72DC AF79
# Subkey fingerprint: 7F17 297C C4A0 7674 0CB3 E42A 96F7 0DFD A84A 070A Link: https://patchwork.freedesktop.org/patch/msgid/20180129192950.bvmhkz3h42t5a25r@art_vandelay
Jani Nikula [Mon, 19 Feb 2018 10:40:09 +0000 (12:40 +0200)]
drm: add documentation for tv connector state margins
A bit boring documentation fix, but gets rid of the warnings:
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state'
[Depends on fe7bc493d979 ("scripts: kernel-doc: support in-line comments
on nested structs/unions") in docs-next to actually fix the warnings.]
Daniel Vetter [Mon, 19 Feb 2018 22:53:54 +0000 (23:53 +0100)]
drm/docs: Document "scaling mode" property better
Move it out of the csv dungeon.
While at it add the missing link to the helper functions for setting
up the "panel rotation" property.
Also OCD how we list enum property values and their corresponding docs.
Going for a nest definition list seams cleanest, no need for also making
it an uordered list.
Daniel Vetter [Mon, 19 Feb 2018 22:53:53 +0000 (23:53 +0100)]
drm/docs: Align layout of optional plane blending properties
Just a bit of drive-by OCD. All the other property docs use enumerations,
for some nice visual consistency. It also neatly highlights the property
name.
Daniel Vetter [Mon, 19 Feb 2018 22:53:52 +0000 (23:53 +0100)]
drm/docs: Discourage adding more to kms-properties.csv
Motivated by patch review.
The table is really hard to read in source form, hard to edit, and
we've moved away to more focused sections about specific features and
how they're exposed in properties.
Those sections can then more easily enumerate options, link to helper
functions and other parts of the docs. All things that get ugly real
fast in the docs.
Linus Walleij [Tue, 20 Feb 2018 07:28:59 +0000 (08:28 +0100)]
drm: simple_kms_helper: Add mode_valid() callback support
The PL111 needs to filter valid modes based on memory bandwidth.
I guess it is a pretty simple operation, so we can still claim
the DRM KMS helper pipeline is simple after adding this (optional)
vtable callback.
Chris Wilson [Mon, 12 Feb 2018 14:55:33 +0000 (14:55 +0000)]
drm: Use idr_init_base(1) when using id==0 for invalid
Use the new idr_init_base() function to create an IDR that knows id==0
is never allocated as it maps to an invalid identifier. By knowing that
id==0 is invalid, the IDR can start from id=1 instead avoiding the issue
of having to start each lookup from the zeroth leaf as id==0 is always
unused (and thus the tree-of-bitmaps indicate that is the first
available).
References: 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian Konig <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> as well. Link: https://patchwork.freedesktop.org/patch/msgid/20180212145533.30046-1-chris@chris-wilson.co.uk
Joe Moriarty [Mon, 12 Feb 2018 19:51:43 +0000 (14:51 -0500)]
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.
- drivers/gpu/drm/drm_edid.c
The call to drm_cvt_mode() in function drm_mode_std() for the
HDTV hack resulted in the possibility of accessing a NULL pointer
if drm_mode_std() returned NULL. A check for this added right after
the call to drm_cvt_mode() in this particular area of code.
Joe Moriarty [Mon, 12 Feb 2018 19:51:42 +0000 (14:51 -0500)]
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.
- drivers/gpu/drm/drm_dp_mst_topology.c
The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt()
could result in a NULL pointer being returned to port->mstb due to a
failure to allocate memory for port->mstb.
Chris Wilson [Thu, 8 Feb 2018 11:38:16 +0000 (11:38 +0000)]
dma-buf/sw_sync: Fix kerneldoc warnings
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'obj'
drivers/dma-buf/sw_sync.c:248: warning: No description found for parameter 'value'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'parent' description in 'sync_pt_create'
drivers/dma-buf/sw_sync.c:248: warning: Excess function parameter 'inc' description in 'sync_pt_create'
Chris Wilson [Thu, 8 Feb 2018 11:08:17 +0000 (11:08 +0000)]
drm: Fix kerneldoc warnings for drm_lease
drivers/gpu/drm/drm_lease.c:56: warning: No description found for parameter 'lessee_id'
drivers/gpu/drm/drm_lease.c:56: warning: Excess function parameter 'id' description in '_drm_find_lessee'
drivers/gpu/drm/drm_lease.c:114: warning: No description found for parameter 'file_priv'
drivers/gpu/drm/drm_lease.c:114: warning: Excess function parameter 'master' description in '_drm_lease_held'
drivers/gpu/drm/drm_lease.c:134: warning: No description found for parameter 'file_priv'
drivers/gpu/drm/drm_lease.c:134: warning: Excess function parameter 'master' description in 'drm_lease_held'
drivers/gpu/drm/drm_lease.c:158: warning: No description found for parameter 'crtcs_in'
drivers/gpu/drm/drm_lease.c:158: warning: Excess function parameter 'crtcs' description in 'drm_lease_filter_crtcs'
drivers/gpu/drm/drm_lease.c:311: warning: No description found for parameter 'top'
drivers/gpu/drm/drm_lease.c:311: warning: Excess function parameter 'master' description in '_drm_lease_revoke'
drivers/gpu/drm/drm_lease.c:494: warning: No description found for parameter 'lessor_priv'
drivers/gpu/drm/drm_lease.c:494: warning: Excess function parameter 'file_priv' description in 'drm_mode_create_lease_ioctl'
drivers/gpu/drm/drm_lease.c:672: warning: No description found for parameter 'lessee_priv'
drivers/gpu/drm/drm_lease.c:672: warning: Excess function parameter 'file_priv' description in 'drm_mode_get_lease_ioctl'
drivers/gpu/drm/drm_lease.c:733: warning: No description found for parameter 'lessor_priv'
drivers/gpu/drm/drm_lease.c:733: warning: Excess function parameter 'file_priv' description in 'drm_mode_revoke_lease_ioctl'
Ørjan Eide [Tue, 30 Jan 2018 20:28:33 +0000 (21:28 +0100)]
drm/rockchip: Respect page offset for PRIME mmap calls
When mapping external DMA-bufs through the PRIME mmap call, we might be
given an offset which has to be respected. However for the internal DRM
GEM mmap path, we have to ignore the fake mmap offset used to identify
the buffer only. Currently the code always zeroes out vma->vm_pgoff,
which breaks the former.
This patch fixes the problem by moving the vm_pgoff assignment to a
function that is used only for GEM mmap path, so that the PRIME path
retains the original offset.
Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com
Haixia Shi [Tue, 30 Jan 2018 20:28:32 +0000 (21:28 +0100)]
drm/rockchip: support prime import sg table
The prime fd to handle ioctl was not used with rockchip before. Support
was added in order to pass graphics_Gbm and to support potential uses
within Chrome OS (e.g. zero-copy video decode, camera).
projects / mirror_ubuntu-jammy-kernel.git / log