Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.
Fixes: 09f5e7dc7ad7 ("perf: Fix perf_event_read_local() time") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.
Fixes: 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Due to what seems to be a copy-paste error, the _NRT master was
identical to the _RT master, which should not be the case.. Fix it
using the values available from the downstream kernel [1].
[1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/scuba-bus.dtsi#127 Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20230103142120.15605-1-konrad.dybcio@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.
Fixes: 2e498d0a74e5 ("perf: Add support for event removal on exec") Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes: d5af44dde546 ("x86/sev: Provide support for SNP guest request NAEs") Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> # d6fd48eff750 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time") Cc: <stable@kernel.org> # 970ab823743f (" virt/coco/sev-guest: Simplify extended guest request handling") Cc: <stable@kernel.org> # c5a338274bdb ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()") Cc: <stable@kernel.org> # 0fdb6cc7c89c ("virt/coco/sev-guest: Carve out the request issuing logic into a helper") Cc: <stable@kernel.org> # d25bae7dc7b0 ("virt/coco/sev-guest: Do some code style cleanups") Cc: <stable@kernel.org> # fa4ae42cc60a ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case") Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This is due to assembler being called with -me500mc which is
a 32 bits target.
The problem comes from the fact that CONFIG_PPC_E500MC is selected for
both the e500mc (32 bits) and the e5500 (64 bits), and therefore the
following makefile rule is wrong:
Today we have CONFIG_TARGET_CPU which provides the identification of the
expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds
the correct CPU option to assembler, no need to add it explicitly.
With that change (And also commit 45f7091aac35 ("powerpc/64: Set default
CPU in Kconfig")), it now is:
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags]
Fixes: 75408e43509e ("x86/resctrl: Allow different CODE/DATA configurations to be staged") Suggested-by: Xin Hao <xhao@linux.alibaba.com> Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function. Fix the issue by
returning early if cmdline_find_option() returns an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A recent change introduced a flag to queue up errors found during
boot-time polling. These errors will be processed during late init once
the MCE subsystem is fully set up.
A number of sysfs updates call mce_restart() which goes through a subset
of the CPU init flow. This includes polling MCA banks and logging any
errors found. Since the same function is used as boot-time polling,
errors will be queued. However, the system is now past late init, so the
errors will remain queued until another error is found and the workqueue
is triggered.
Call mce_schedule_work() at the end of mce_restart() so that queued
errors are processed.
Fixes: 3bff147b187d ("x86/mce: Defer processing of early errors") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The second to last argument is clk_root (root of the clock), however the
code called q6prm_request_lpass_clock() with clk_attr instead
(copy-paste error). This effectively was passing value of 1 as root
clock which worked on some of the SoCs (e.g. SM8450) but fails on
others, depending on the ADSP. For example on SM8550 this "1" as root
clock is not accepted and results in errors coming from ADSP.
Fixes: 2f20640491ed ("ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230302122908.221398-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For some reason the convention for topology names was not followed and
the name inspired by another unrelated hardware configuration. As a
result, the kernel will request a non-existent topology file.
Link: https://github.com/thesofproject/sof/pull/6878 Fixes: 2ec8b081d59f ("ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ADL match table") Cc: stable@vger.kernel.org Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230307100733.15025-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In case that psci_pd_init_topology() fails for some reason,
psci_pd_remove() will be responsible for deleting provider and removing
genpd from psci_pd_providers list. There will be a failure when removing
the cluster PD, because the cpu (child) PDs haven't been removed.
msg_ring requests transferring files support auto index selection via
IORING_FILE_INDEX_ALLOC, however they don't return the selected index
to the target ring and there is no other good way for the userspace to
know where is the receieved file.
Return the index for allocated slots and 0 otherwise, which is
consistent with other fixed file installing requests.
Cc: stable@vger.kernel.org # v6.0+ Fixes: e6130eba8a848 ("io_uring: add support for passing fixed file descriptors") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://github.com/axboe/liburing/issues/809 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since RISC-V supports ioremap() with huge page (pud/pmd) mapping,
However, vmalloc_fault() assumes that the vmalloc range is limited
to pte mappings. To complete the vmalloc_fault() function by adding
huge page support.
The recent fix for the deferred I/O by the commit 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used. It resulted in a frozen screen even if something
is redrawn there after the close. The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.
This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.
As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.
Also, a useless BUG_ON() is dropped.
Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.
However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:
| BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x61c/0x1b40
| softirqs last enabled at (0): copy_process+0x61c/0x1b40
| softirqs last disabled at (0): 0x0
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
| Call trace:
| dump_backtrace+0xac/0x138
| show_stack+0x30/0x48
| dump_stack_lvl+0x60/0xb0
| dump_stack+0x18/0x28
| __might_resched+0x160/0x270
| __might_sleep+0x58/0xb0
| down_timeout+0x34/0x98
| acpi_os_wait_semaphore+0x7c/0xc0
| acpi_ut_acquire_mutex+0x58/0x108
| acpi_get_table+0x40/0xe8
| acpi_get_pptt+0x48/0xa0
| acpi_get_cache_info+0x38/0x140
| init_cache_level+0xf4/0x118
| detect_cache_attributes+0x2e4/0x640
| update_siblings_masks+0x3c/0x330
| store_cpu_topology+0x88/0xf0
| secondary_start_kernel+0xd0/0x168
| __secondary_switched+0xb8/0xc0
Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context.
Fixes: 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.
Find a valid modeline depending on the machine graphic card
configuration and add the fb_check_var() function to validate
Xorg provided graphics settings.
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Lower the power-on failed message severity from warn to info when the
controller does not power-up. It's normal to have this situation when
the SD card slot is empty, therefore we should not warn the user about
it.
Fixes: 7ca0f166f5b2 ("mmc: sdhci_am654: Add workaround for card detect debounce timer") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When CONFIG_TARGET_CPU is specified then pass its value to the compiler
-mcpu option. This fixes following build error when building kernel with
powerpc e500 SPE capable cross compilers:
Similar change was already introduced for the main powerpc Makefile in
commit 446cda1b21d9 ("powerpc/32: Don't always pass -mcpu=powerpc to the
compiler").
Fixes: 40a75584e526 ("powerpc/boot: Build wrapper for an appropriate CPU") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2ae3ae5887babfdacc34435bff0944b3f336100a.1674632329.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since commit 0069f3d14e7a ("powerpc/64e: Tie PPC_BOOK3E_64 to
PPC_E500MC"), the only possible BOOK3E/64 are E500, so no need of a
default CPU over the E5500.
When the user selects book3e, they must have an e500 compatible
compiler, and it won't work anymore with the default -mcpu=power64, see
commit d6b551b8f90c ("powerpc/64e: Fix build failure with GCC
12 (unrecognized opcode: `wrteei')").
For book3s/64, replace GENERIC_CPU by POWERPC64_CPU to match the PPC32
POWERPC_CPU, and set a default mpcu value in Kconfig directly.
When a user selects a particular CPU, they must ensure the compiler has
the requested capability. Therefore, remove hidden fallback, instead
offer user the possibility to say they want to use the toolchain
default.
Fixes: d6b551b8f90c ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')") Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/76c11197b058193dcb8e8b26adffba09cfbdab11.1674632329.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
By checking huge_pte_none(), we incorrectly classify PTE markers as
"present". Instead, check huge_pte_none_mostly(), classifying PTE markers
the same as if the PTE were completely blank.
PTE markers, unlike other kinds of swap entries, don't reference any
physical page and don't indicate that a physical page was mapped
previously. As such, treat them as non-present for the sake of mincore().
Link: https://lkml.kernel.org/r/20230302222404.175303-1-jthoughton@google.com Fixes: 5c041f5d1f23 ("mm: teach core mm about pte markers") Signed-off-by: James Houghton <jthoughton@google.com> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: James Houghton <jthoughton@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, we'd lose the userfaultfd-wp marker when PTE-mapping a huge
zeropage, resulting in the next write faults in the PMD range not
triggering uffd-wp events.
Various actions (partial MADV_DONTNEED, partial mremap, partial munmap,
partial mprotect) could trigger this. However, most importantly,
un-protecting a single sub-page from the userfaultfd-wp handler when
processing a uffd-wp event will PTE-map the shared huge zeropage and lose
the uffd-wp bit for the remainder of the PMD.
Let's properly propagate the uffd-wp bit to the PMDs.
While unplugging the vp_vdpa device, it triggers a kernel panic
The root cause is: vdpa_mgmtdev_unregister() will accesses modern
devices which will cause a use after free.
So need to change the sequence in vp_vdpa_remove
Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa") Tested-by: Lei Yang <leiyang@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230214080924.131462-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality. This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context. This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.
Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.
Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave") Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page. This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost. Fix the problem by invalidating page beyond EOF after
failed write.
Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
BUG: KASAN: use-after-free in lookup_rec
Read of size 8 at addr ffff000199270ff0 by task modprobe
CPU: 2 Comm: modprobe
Call trace:
kasan_report
__asan_load8
lookup_rec
ftrace_location
arch_check_ftrace_location
check_kprobe_address_safe
register_kprobe
When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.
Don't check the ip when pg->index is 0.
Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com Cc: stable@vger.kernel.org Fixes: 9644302e3315 ("ftrace: Speed up search by skipping pages by address") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Christoph reports a lockdep splat in the mptcp_subflow_create_socket()
error path, when such function is invoked by
mptcp_pm_nl_create_listen_socket().
Such code path acquires two separates, nested socket lock, with the
internal lock operation lacking the "nested" annotation. Adding that
in sock_release() for mptcp's sake only could be confusing.
Instead just add a new lockclass to the in-kernel msk socket,
re-initializing the lockdep infra after the socket creation.
Fixes: ad2171009d96 ("mptcp: fix locking for in-kernel listener creation") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/354 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Add __ro_after_init labels for the variables tcp_prot_override and
tcpv6_prot_override, just like other variables adjacent to them, to
indicate that they are initialised from the init hooks and no writes
occur afterwards.
Fixes: b19bc2945b40 ("mptcp: implement delegated actions") Cc: stable@vger.kernel.org Fixes: 51fa7f8ebf0e ("mptcp: mark ops structures as ro_after_init") Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The msk grace period can legitly expire in between the last
reference count dropped in mptcp_subflow_queue_clean() and
the later eventual access in inet_csk_listen_stop()
After the previous patch we don't need anymore special-casing
msk listener socket cleanup: the mptcp worker will process each
of the unaccepted msk sockets.
Just drop the now unnecessary code.
Please note this commit depends on the two parent ones:
mptcp: refactor passive socket initialization
mptcp: use the workqueue to destroy unaccepted sockets
Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/346 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We need to properly clean-up all the paired MPTCP-level
resources and be sure to release the msk last, even when
the unaccepted subflow is destroyed by the TCP internals
via inet_child_forget().
We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra,
explicitly checking that for the critical scenario: the
closed subflow is the MPC one, the msk is not accepted and
eventually going through full cleanup.
With such change, __mptcp_destroy_sock() is always called
on msk sockets, even on accepted ones. We don't need anymore
to transiently drop one sk reference at msk clone time.
Please note this commit depends on the parent one:
mptcp: refactor passive socket initialization
Fixes: 58b09919626b ("mptcp: create msk early") Cc: stable@vger.kernel.org Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/347 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
After commit 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
unaccepted msk sockets go throu complete shutdown, we don't need anymore
to delay inserting the first subflow into the subflow lists.
The reference counting deserve some extra care, as __mptcp_close() is
unaware of the request socket linkage to the first subflow.
Please note that this is more a refactoring than a fix but because this
modification is needed to include other corrections, see the following
commits. Then a Fixes tag has been added here to help the stable team.
Fixes: 30e51b923e43 ("mptcp: fix unreleased socket in accept queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Christoph reported a possible deadlock while the TCP stack
destroys an unaccepted subflow due to an incoming reset: the
MPTCP socket error path tries to acquire the msk-level socket
lock while TCP still owns the listener socket accept queue
spinlock, and the reverse dependency already exists in the
TCP stack.
Note that the above is actually a lockdep false positive, as
the chain involves two separate sockets. A different per-socket
lockdep key will address the issue, but such a change will be
quite invasive.
Instead, we can simply stop earlier the socket error handling
for orphaned or unaccepted subflows, breaking the critical
lockdep chain. Error handling in such a scenario is a no-op.
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/355 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.
Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Align the SMU driver interface version with PMFW to
suppress the version mismatch message on driver loading.
Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The VCN firmware loading path enables the indirect SRAM mode if it's
advertised as supported. We might have some cases of FW issues that
prevents this mode to working properly though, ending-up in a failed
probe. An example below, observed in the Steam Deck:
[...]
[drm] failed to load ucode VCN0_RAM(0x3A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000)
amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110)
[drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110
amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed
amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init
[...]
Disabling the VCN block circumvents this, but it's a very invasive
workaround that turns off the entire feature. So, let's add a quirk
on VCN loading that checks for known problematic BIOSes on Vangogh,
so we can proactively disable the indirect SRAM mode and allow the
HW proper probe and VCN IP block to work fine.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385 Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode") Cc: stable@vger.kernel.org Cc: James Zhu <James.Zhu@amd.com> Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Always setup overdrive tables after resume. Preserve only some
user-defined settings in user_overdrive_table if they're set.
Copy restored user_overdrive_table into od_table to get correct
values.
On cold boot, BTC was triggered and GfxVfCurve was calibrated. We
got VfCurve settings (a). On resuming back, BTC will be triggered
again and GfxVfCurve will be recalibrated. VfCurve settings (b)
got may be different from those of cold boot. So if we reuse
those VfCurve settings (a) got on cold boot on suspend, we can
run into discrepencies.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other
kgd2kfd calls. This should fix IOMMU errors on resume from suspend when
KFD IOMMU initialization failed.
Reported-by: Matt Fagnani <matt.fagnani@bell.net> Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454 Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info> Cc: stable@vger.kernel.org Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Matt Fagnani <matt.fagnani@bell.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173fac ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173fac ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333 Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org # v5.5 Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free.
Fixes: f49a51bfdc8e ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Make sure to clear the transfer buffer before fetching the EDID to
avoid leaking slab data to the logs on errors that leave the buffer
unchanged.
Fixes: 69c7717c20cc ("drm/edid: Dump the EDID when drm_edid_get_panel_id() has an error") Cc: stable@vger.kernel.org # 6.2 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230302074704.11371-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
After use_asid_allocator is enabled, the userspace application will
crash by stale TLB entries. Because only using cpumask_clear_cpu without
local_flush_tlb_all couldn't guarantee CPU's TLB entries were fresh.
Then set_mm_asid would cause the user space application to get a stale
value by stale TLB entry, but set_mm_noasid is okay.
Here is the symptom of the bug:
unhandled signal 11 code 0x1 (coredump)
0x0000003fd6d22524 <+4>: auipc s0,0x70
0x0000003fd6d22528 <+8>: ld s0,-148(s0) # 0x3fd6d92490
=> 0x0000003fd6d2252c <+12>: ld a5,0(s0)
(gdb) i r s0
s0 0x8082ed1cc3198b21 0x8082ed1cc3198b21
(gdb) x /2x 0x3fd6d92490
0x3fd6d92490: 0xd80ac8a8 0x0000003f
The core dump file shows that register s0 is wrong, but the value in
memory is correct. Because 'ld s0, -148(s0)' used a stale mapping entry
in TLB and got a wrong result from an incorrect physical address.
When the task ran on CPU0, which loaded/speculative-loaded the value of
address(0x3fd6d92490), then the first version of the mapping entry was
PTWed into CPU0's TLB.
When the task switched from CPU0 to CPU1 (No local_tlb_flush_all here by
asid), it happened to write a value on the address (0x3fd6d92490). It
caused do_page_fault -> wp_page_copy -> ptep_clear_flush ->
ptep_get_and_clear & flush_tlb_page.
The flush_tlb_page used mm_cpumask(mm) to determine which CPUs need TLB
flush, but CPU0 had cleared the CPU0's mm_cpumask in the previous
switch_mm. So we only flushed the CPU1 TLB and set the second version
mapping of the PTE. When the task switched from CPU1 to CPU0 again, CPU0
still used a stale TLB mapping entry which contained a wrong target
physical address. It raised a bug when the task happened to read that
value.
CPU0 CPU1
- switch 'task' in
- read addr (Fill stale mapping
entry into TLB)
- switch 'task' out (no tlb_flush)
- switch 'task' in (no tlb_flush)
- write addr cause pagefault
do_page_fault() (change to
new addr mapping)
wp_page_copy()
ptep_clear_flush()
ptep_get_and_clear()
& flush_tlb_page()
write new value into addr
- switch 'task' out (no tlb_flush)
- switch 'task' in (no tlb_flush)
- read addr again (Use stale
mapping entry in TLB)
get wrong value from old phyical
addr, BUG!
The solution is to keep all CPUs' footmarks of cpumask(mm) in switch_mm,
which could guarantee to invalidate all stale TLB entries during TLB
flush.
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
CVE-2023-30456 Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask
that effectively controls the largest guest physical APIC ID supported by
x2AVIC, instead of hardcoding the number of bits to 8 (and the number of
VM bits to 24).
The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a
reference back to KVM in case the IOMMU cannot inject an interrupt into a
non-running vCPU. In such a case, the IOMMU notifies software by creating
a GALog entry with the corresponded GATag, and KVM then uses the GATag to
find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results
in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255.
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Define the "physical table max index mask" as bits 8:0, not 9:0. x2AVIC
currently supports a max of 512 entries, i.e. the max index is 511, and
the inputs to GENMASK_ULL() are inclusive. The bug is benign as bit 9 is
reserved and never set by KVM, i.e. KVM is just clearing bits that are
guaranteed to be zero.
Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states
that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area. I.e.
that table wasn't updated when x2AVIC support was added.
Opportunistically fix the comment for the max AVIC ID to align with the
code, and clean up comment formatting too.
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Use DFS root session whenever possible to get new DFS referrals
otherwise we might end up with an IPC tcon (tcon->ses->tcon_ipc) that
doesn't respond to them. It should be safe accessing
@ses->dfs_root_ses directly in cifs_inval_name_dfs_link_error() as it
has same lifetime as of @tcon.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Return the DFS root session id in /proc/fs/cifs/DebugData to make it
easier to track which IPC tcon was used to get new DFS referrals for a
specific connection, and aids in debugging.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The UAF bug occurred because we were putting DFS root sessions in
cifs_umount() while DFS cache refresher was being executed.
Make DFS root sessions have same lifetime as DFS tcons so we can avoid
the use-after-free bug is DFS cache refresher and other places that
require IPCs to get new DFS referrals on. Also, get rid of mount
group handling in DFS cache as we no longer need it.
This fixes below use-after-free bug catched by KASAN
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Set the DFS root session pointer earlier when creating a new SMB
session to prevent racing with smb2_reconnect(), cifs_reconnect_tcon()
and DFS cache refresher.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.
Cc: stable@vger.kernel.org Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
The function hist_field_name() cannot handle being passed a NULL field
parameter. It should never be NULL, but due to a previous bug, NULL was
passed to the function and the kernel crashed due to a NULL dereference.
Mark Rutland reported this to me on IRC.
The bug was fixed, but to prevent future bugs from crashing the kernel,
check the field and add a WARN_ON() if it is NULL.
Link: https://lkml.kernel.org/r/20230302020810.762384440@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: c6afad49d127f ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers") Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since the commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Before my changes to how multichannel reconnects work, the
primary channel was always used to do a non-binding session
setup. With my changes, that is not the case anymore.
Missed this place where channel at index 0 was forcibly
updated with the signing key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When BLOCK_LEGACY_AUTOLOAD is not enable, mdadm is not able to
activate new arrays unless "CREATE names=yes" appears in
mdadm.conf
As this is a regression we need to always enable BLOCK_LEGACY_AUTOLOAD
for when MD is selected - at least until mdadm is updated and the
updates widely available.
Cc: stable@vger.kernel.org # v5.18+ Fixes: fbdee71bb5d8 ("block: deprecate autoloading based on dev_t") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to trigger a NULL-pointer
deference when either a NULL pointer or not fully initialised node is
returned from exynos_generic_icc_xlate().
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs") Cc: stable@vger.kernel.org # 5.11 Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Cc: stable@vger.kernel.org # 5.5 Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Cc: stable@vger.kernel.org # 5.7 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 62feb14ee8a3 ("interconnect: qcom: Consolidate interconnect RPM support") Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Cc: stable@vger.kernel.org # 5.7 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail:
of_icc_xlate_onecell: invalid index 0
cpu cpu0: error -EINVAL: error finding src node
cpu cpu0: dev_pm_opp_of_find_icc_paths: Unable to get path0: -22
qcom-cpufreq-hw: probe of 18591000.cpufreq failed with error -22
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support") Cc: stable@vger.kernel.org # 5.7 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-6-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: f0d8048525d7 ("interconnect: Add imx core driver") Cc: stable@vger.kernel.org # 5.8 Cc: Alexandre Bailon <abailon@baylibre.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board Link: https://lore.kernel.org/r/20230306075651.2449-5-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider interface is inherently racy as
providers are expected to be added before being fully initialised.
Specifically, nodes are currently not added and the provider data is not
initialised until after registering the provider which can cause racing
DT lookups to fail.
Add a new provider API which will be used to fix up the interconnect
drivers.
The old API is reimplemented using the new interface and will be removed
once all drivers have been fixed.
Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API") Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board Link: https://lore.kernel.org/r/20230306075651.2449-4-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The interconnect framework currently expects that providers are only
removed when there are no users and after all nodes have been removed.
There is currently nothing that guarantees this to be the case and the
framework does not do any reference counting, but refusing to remove the
provider is never correct as that would leave a dangling pointer to a
resource that is about to be released in the global provider list (e.g.
accessible through debugfs).
Replace the current sanity checks with WARN_ON() so that the provider is
always removed.
Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API") Cc: stable@vger.kernel.org # 5.1: 680f8666baf6: interconnect: Make icc_provider_del() return void Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board Link: https://lore.kernel.org/r/20230306075651.2449-3-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.
This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.
Cc: <stable@vger.kernel.org> Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The LRU mechanism may look up a resource in the process of being removed
from an object. The locking rules here are a bit unclear but it looks
currently like res->bo assignment is protected by the LRU lock, whereas
bo->resource is protected by the object lock, while *clearing* of
bo->resource is also protected by the LRU lock. This means that if
we check that bo->resource points to the LRU resource under the LRU
lock we should be safe.
So perform that check before deciding to swap out a bo. That avoids
dereferencing a NULL bo->resource in ttm_bo_swapout().
Fixes: 6a9b02899402 ("drm/ttm: move the LRU into resource handling v4") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Qiang Yu <qiang.yu@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.19+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-2-thomas.hellstrom@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 380def2d4cf2 ("memory: tegra124: Support interconnect framework") Cc: stable@vger.kernel.org # 5.12 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 06f079816d4c ("memory: tegra-mc: Add interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation.
Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <stable@kernel.org> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The 8250 handle_irq callback is not just called from the interrupt
handler but also from a timer callback when polling (e.g. for ports
without an interrupt line). Consequently the callback must explicitly
disable interrupts to avoid a potential deadlock with another interrupt
in polled mode.
Fix up the two paths in the freescale callback that failed to re-enable
interrupts when polling.
Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>