Jose Abreu [Wed, 18 Dec 2019 10:17:42 +0000 (11:17 +0100)]
net: stmmac: Enable 16KB buffer size
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in
the calculation of RX buffer size.
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:41 +0000 (11:17 +0100)]
net: stmmac: 16KB buffer must be 16 byte aligned
The 16KB RX Buffer must also be 16 byte aligned. Fix it.
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:40 +0000 (11:17 +0100)]
net: stmmac: RX buffer size must be 16 byte aligned
We need to align the RX buffer size to at least 16 byte so that IP
doesn't mis-behave. This is required by HW.
Changes from v2:
- Align UP and not DOWN (David)
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:39 +0000 (11:17 +0100)]
net: stmmac: xgmac: Clear previous RX buffer size
When switching between buffer sizes we need to clear the previous value.
Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:38 +0000 (11:17 +0100)]
net: stmmac: Only the last buffer has the FCS field
Only the last received buffer contains the FCS field. Check for end of
packet before trying to strip the FCS field.
Fixes: 88ebe2cf7f3f ("net: stmmac: Rework stmmac_rx()") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:37 +0000 (11:17 +0100)]
net: stmmac: Do not accept invalid MTU values
The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.
Also check if provided and rounded MTU does not passes the maximum limit
of 16K.
Changes from v2:
- Align MTU before checking if its valid
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:36 +0000 (11:17 +0100)]
net: stmmac: Determine earlier the size of RX buffer
Split Header feature needs to know the size of RX buffer but current
code is determining it too late. Fix this by moving the RX buffer
computation to earlier stage.
Changes from v2:
- Do not try to align already aligned buffer size
Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 18 Dec 2019 10:17:35 +0000 (11:17 +0100)]
net: stmmac: selftests: Needs to check the number of Multicast regs
When running the MC and UC filter tests we setup a multicast address
that its expected to be blocked. If the number of available multicast
registers is zero, driver will always pass the multicast packets which
will fail the test.
Check if available multicast addresses is enough before running the
tests.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Wed, 18 Dec 2019 09:21:55 +0000 (17:21 +0800)]
net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive()
The kernel may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
net/nfc/nci/uart.c, 349:
nci_skb_alloc in nci_uart_default_recv_buf
net/nfc/nci/uart.c, 255:
(FUNC_PTR)nci_uart_default_recv_buf in nci_uart_tty_receive
net/nfc/nci/uart.c, 254:
spin_lock in nci_uart_tty_receive
nci_skb_alloc(GFP_KERNEL) can sleep at runtime.
(FUNC_PTR) means a function pointer is called.
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC for
nci_skb_alloc().
This bug is found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Tue, 17 Dec 2019 11:28:56 +0000 (11:28 +0000)]
nfp: flower: fix stats id allocation
As flower rules are added, they are given a stats ID based on the number
of rules that can be supported in firmware. Only after the initial
allocation of all available IDs does the driver begin to reuse those that
have been released.
The initial allocation of IDs was modified to account for multiple memory
units on the offloaded device. However, this introduced a bug whereby the
counter that controls the IDs could be decremented before the ID was
assigned (where it is further decremented). This means that the stats ID
could be assigned as -1/0xfffffff which is out of range.
Fix this by only decrementing the main counter after the current ID has
been assigned.
Fixes: 467322e2627f ("nfp: flower: support multiple memory units for filter offloads") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Tue, 17 Dec 2019 06:51:45 +0000 (07:51 +0100)]
net: ag71xx: fix compile warnings
drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_probe':
drivers/net/ethernet/atheros/ag71xx.c:1776:30: warning: passing argument 2 of
'of_get_phy_mode' makes pointer from integer without a cast [-Wint-conversion]
In file included from drivers/net/ethernet/atheros/ag71xx.c:33:
./include/linux/of_net.h:15:69: note: expected 'phy_interface_t *'
{aka 'enum <anonymous> *'} but argument is of type 'int'
Fixes: 0c65b2b90d13c1 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 17 Dec 2019 02:51:03 +0000 (18:51 -0800)]
net: annotate lockless accesses to sk->sk_pacing_shift
sk->sk_pacing_shift can be read and written without lock
synchronization. This patch adds annotations to
document this fact and avoid future syzbot complains.
This might also avoid unexpected false sharing
in sk_pacing_shift_update(), as the compiler
could remove the conditional check and always
write over sk->sk_pacing_shift :
if (sk->sk_pacing_shift != val)
sk->sk_pacing_shift = val;
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 17 Dec 2019 01:57:40 +0000 (01:57 +0000)]
net: qlogic: Fix error paths in ql_alloc_large_buffers()
ql_alloc_large_buffers() has the usual RX buffer allocation
loop where it allocates skbs and maps them for DMA. It also
treats failure as a fatal error.
There are (at least) three bugs in the error paths:
1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the
first buffer that couldn't be allocated will have .skb == NULL.
But the qla_buf[] array is not zero-initialised.
2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is
incorrect for the last allocated skb, if DMA mapping failed.
3. Commit 1acb8f2a7a9f ("net: qlogic: Fix memory leak in
ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any()
after the skb is recorded in lrg_buf[], so ql_free_large_buffers()
will double-free it.
The bugs are somewhat inter-twined, so fix them all at once:
* Clear each entry in qla_buf[] before attempting to allocate
an skb for it. This goes half-way to fixing bug 1.
* Set the .skb field only after the skb is DMA-mapped. This
fixes the rest.
Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...") Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...") Fixes: 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
sctp: fix memleak on err handling of stream initialization
syzbot reported a memory leak when an allocation fails within
genradix_prealloc() for output streams. That's because
genradix_prealloc() leaves initialized members initialized when the
issue happens and SCTP stack will abort the current initialization but
without cleaning up such members.
The fix here is to always call genradix_free() when genradix_prealloc()
fails, for output and also input streams, as it suffers from the same
issue.
Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com Fixes: 2075e50caf5e ("sctp: convert to genradix") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Mon, 16 Dec 2019 15:32:30 +0000 (17:32 +0200)]
dpaa2-ptp: fix double free of the ptp_qoriq IRQ
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was
used on the remove path to free any allocated resources.
The ptp_qoriq IRQ is among these resources that are freed in
ptp_qoriq_free() even though it is also a managed one (allocated using
devm_request_threaded_irq).
Drop the resource managed version of requesting the IRQ in order to not
trigger a double free of the interrupt as below:
Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver") Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2019 03:26:11 +0000 (19:26 -0800)]
Merge tag 'mac80211-for-net-2019-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* disable AQL on most drivers, addressing the iwlwifi issues
* fix double-free on network namespace changes
* fix TID field in frames injected through monitor interfaces
* fix ieee80211_calc_rx_airtime()
* fix NULL pointer dereference in rfkill (and remove BUG_ON)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a Kconfig dependency on NET_VENDOR_MICROSEMI, which also implies
CONFIG_NETDEVICES.
Depending on a vendor config violates menuconfig locality for the DSA
driver, but is the smallest compromise since all other solutions are
much more complicated (see [0]).
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Navid Emamdoost [Sun, 15 Dec 2019 01:10:44 +0000 (19:10 -0600)]
net: gemini: Fix memory leak in gmac_setup_txqs
In the implementation of gmac_setup_txqs() the allocated desc_ring is
leaked if TX queue base is not aligned. Release it via
dma_free_coherent.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 13 Dec 2019 20:00:27 +0000 (12:00 -0800)]
net: dsa: b53: Fix egress flooding settings
There were several issues with 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports:
- both user and CPU ports must allow unicast and multicast forwarding by
default otherwise this just flat out breaks connectivity for
standalone DSA ports
- IP multicast is treated similarly as multicast, but has separate
control registers
- the UC, MC and IPMC lookup failure register offsets were wrong, and
instead used bit values that are meaningful for the
B53_IP_MULTICAST_CTRL register
Fixes: 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2019 00:07:12 +0000 (16:07 -0800)]
Merge branch 'vsock-fixes'
Stefano Garzarella says:
====================
vsock/virtio: fix null-pointer dereference and related precautions
This series mainly solves a possible null-pointer dereference in
virtio_transport_recv_listen() introduced with the multi-transport
support [PATCH 1].
PATCH 2 adds a WARN_ON check for the same potential issue
and a returned error in the virtio_transport_send_pkt_info() function
to avoid crashing the kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
vsock/virtio: add WARN_ON check on virtio_transport_get_ops()
virtio_transport_get_ops() and virtio_transport_send_pkt_info()
can only be used on connecting/connected sockets, since a socket
assigned to a transport is required.
This patch adds a WARN_ON() on virtio_transport_get_ops() to check
this requirement, a comment and a returned error on
virtio_transport_send_pkt_info(),
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
vsock/virtio: fix null-pointer dereference in virtio_transport_recv_listen()
With multi-transport support, listener sockets are not bound to any
transport. So, calling virtio_transport_reset(), when an error
occurs, on a listener socket produces the following null-pointer
dereference:
This happens because virtio_transport_reset() calls
virtio_transport_send_pkt_info() that can be used only on
connecting/connected sockets.
This patch fixes the issue, using virtio_transport_reset_no_sock()
instead of virtio_transport_reset() when we are handling a listener
socket.
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aditya Pakki [Sun, 15 Dec 2019 15:34:08 +0000 (09:34 -0600)]
rfkill: Fix incorrect check to avoid NULL pointer dereference
In rfkill_register, the struct rfkill pointer is first derefernced
and then checked for NULL. This patch removes the BUG_ON and returns
an error to the caller in case rfkill is NULL.
Paul Durrant [Fri, 13 Dec 2019 13:20:40 +0000 (13:20 +0000)]
xen-netback: avoid race that can lead to NULL pointer dereference
In function xenvif_disconnect_queue(), the value of queue->rx_irq is
zeroed *before* queue->task is stopped. Unfortunately that task may call
notify_remote_via_irq(queue->rx_irq) and calling that function with a
zero value results in a NULL pointer dereference in evtchn_from_irq().
This patch simply re-orders things, stopping all tasks before zero-ing the
irq values, thereby avoiding the possibility of the race.
Fixes: 2ac061ce97f4 ("xen/netback: cleanup init and deinit code") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cristian Birsan [Fri, 13 Dec 2019 16:33:11 +0000 (18:33 +0200)]
net: usb: lan78xx: Fix error message format specifier
Display the return code as decimal integer.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Ursula Braun [Thu, 12 Dec 2019 21:35:58 +0000 (22:35 +0100)]
net/smc: add fallback check to connect()
FASTOPEN setsockopt() or sendmsg() may switch the SMC socket to fallback
mode. Once fallback mode is active, the native TCP socket functions are
called. Nevertheless there is a small race window, when FASTOPEN
setsockopt/sendmsg runs in parallel to a connect(), and switch the
socket into fallback mode before connect() takes the sock lock.
Make sure the SMC-specific connect setup is omitted in this case.
This way a syzbot-reported refcount problem is fixed, triggered by
different threads running non-blocking connect() and FASTOPEN_KEY
setsockopt.
resulted in the wrong interface being passed to the mac_link_up()
function. Fix this up.
Fixes: b4b12b0d2f02 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Thanks Paolo Pisati for pointing out the original patchset where this
appeared.
Fixes: 65190f77424d (selftests/tls: add a test for fragmented messages) Reported-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jakub Kicinski [Sun, 15 Dec 2019 01:16:12 +0000 (17:16 -0800)]
Merge branch 'gtp-fix-several-bugs-in-gtp-module'
Taehee Yoo says:
====================
gtp: fix several bugs in gtp module
This patchset fixes several bugs in the GTP module.
1. Do not allow adding duplicate TID and ms_addr pdp context.
In the current code, duplicate TID and ms_addr pdp context could be added.
So, RX and TX path could find correct pdp context.
2. Fix wrong condition in ->dumpit() callback.
->dumpit() callback is re-called if dump packet size is too big.
So, before return, it saves last position and then restart from
last dump position.
TID value is used to find last dump position.
GTP module allows adding zero TID value. But ->dumpit() callback ignores
zero TID value.
So, dump would not work correctly if dump packet size too big.
3. Fix use-after-free in ipv4_pdp_find().
RX and TX patch always uses gtp->tid_hash and gtp->addr_hash.
but while packet processing, these hash pointer would be freed.
So, use-after-free would occur.
4. Fix panic because of zero size hashtable
GTP hashtable size could be set by user-space.
If hashsize is set to 0, hashtable will not work and panic will occur.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Taehee Yoo [Wed, 11 Dec 2019 08:23:48 +0000 (08:23 +0000)]
gtp: avoid zero size hashtable
GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace, hashtable will not work and panic will occur.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Taehee Yoo [Wed, 11 Dec 2019 08:23:34 +0000 (08:23 +0000)]
gtp: fix an use-after-free in ipv4_pdp_find()
ipv4_pdp_find() is called in TX packet path of GTP.
ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context.
In the current code, gtp->tid_hash and gtp->addr_hash are freed by
->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing.
So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash.
Instead, dev->priv_destructor() would be used because this callback
is called after all packet processing safely.
Test commands:
ip link add veth1 type veth peer name veth2
ip a a 172.0.0.1/24 dev veth1
ip link set veth1 up
ip a a 172.99.0.1/32 dev lo
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2
ip r a 172.99.0.2/32 dev gtp1
ip link set gtp1 mtu 1500
ip netns add ns2
ip link set veth2 netns ns2
ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2
ip netns exec ns2 ip link set veth2 up
ip netns exec ns2 ip a a 172.99.0.2/32 dev lo
ip netns exec ns2 ip link set lo up
ip netns exec ns2 gtp-link add gtp2 &
ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1
ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
ip netns exec ns2 ip link set gtp2 mtu 1500
Taehee Yoo [Wed, 11 Dec 2019 08:23:17 +0000 (08:23 +0000)]
gtp: fix wrong condition in gtp_genl_dump_pdp()
gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.
If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.
In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Taehee Yoo [Wed, 11 Dec 2019 08:23:00 +0000 (08:23 +0000)]
gtp: do not allow adding duplicate tid and ms_addr pdp context
GTP RX packet path lookups pdp context with TID. If duplicate TID pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, TID value should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, ms_addr value should be unique.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Mahesh Bandewar [Fri, 6 Dec 2019 23:44:55 +0000 (15:44 -0800)]
bonding: fix active-backup transition after link failure
After the recent fix in commit 1899bb325149 ("bonding: fix state
transition issue in link monitoring"), the active-backup mode with
miimon initially come-up fine but after a link-failure, both members
transition into backup state.
Following steps to reproduce the scenario (eth1 and eth2 are the
slaves of the bond):
ip link set eth1 up
ip link set eth2 down
sleep 1
ip link set eth2 up
ip link set eth1 down
cat /sys/class/net/eth1/bonding_slave/state
cat /sys/class/net/eth2/bonding_slave/state
Fixes: 1899bb325149 ("bonding: fix state transition issue in link monitoring") CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jakub Kicinski [Sat, 14 Dec 2019 21:01:17 +0000 (13:01 -0800)]
Merge branch 'bnx2x-bug-fixes'
Manish Chopra says:
====================
bnx2x: bug fixes
This series has two driver changes, one to fix some unexpected
hardware behaviour casued during the parity error recovery in
presence of SR-IOV VFs and another one related for fixing resource
management in the driver among the PFs configured on an engine.
Please consider applying it to "net".
V1->V2:
=======
Fix the compilation errors reported by kbuild test robot
on the patch #1 with CONFIG_BNX2X_SRIOV=n
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Manish Chopra [Wed, 11 Dec 2019 17:59:56 +0000 (09:59 -0800)]
bnx2x: Fix logic to get total no. of PFs per engine
Driver doesn't calculate total number of PFs configured on a
given engine correctly which messed up resources in the PFs
loaded on that engine, leading driver to exceed configuration
of resources (like vlan filters etc.) beyond the limit per
engine, which ended up with asserts from the firmware.
Manish Chopra [Wed, 11 Dec 2019 17:59:55 +0000 (09:59 -0800)]
bnx2x: Do not handle requests from VFs after parity
Parity error from the hardware will cause PF to lose the state
of their VFs due to PF's internal reload and hardware reset following
the parity error. Restrict any configuration request from the VFs after
the parity as it could cause unexpected hardware behavior, only way
for VFs to recover would be to trigger FLR on VFs and reload them.
Arnd Bergmann [Wed, 11 Dec 2019 12:56:09 +0000 (13:56 +0100)]
net: ethernet: ti: select PAGE_POOL for switchdev driver
The new driver misses a dependency:
drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_rx_handler':
cpsw_new.c:(.text+0x259c): undefined reference to `__page_pool_put_page'
cpsw_new.c:(.text+0x25d0): undefined reference to `page_pool_alloc_pages'
drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_fill_rx_channels':
cpsw_priv.c:(.text+0x22d8): undefined reference to `page_pool_alloc_pages'
cpsw_priv.c:(.text+0x2420): undefined reference to `__page_pool_put_page'
drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_create_xdp_rxqs':
cpsw_priv.c:(.text+0x2624): undefined reference to `page_pool_create'
drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_run_xdp':
cpsw_priv.c:(.text+0x2dc8): undefined reference to `__page_pool_put_page'
Other drivers use 'select' for PAGE_POOL, so do the same here.
Haiyang Zhang [Wed, 11 Dec 2019 22:26:27 +0000 (14:26 -0800)]
hv_netvsc: Fix tx_table init in rndis_set_subchannel()
Host can provide send indirection table messages anytime after RSS is
enabled by calling rndis_filter_set_rss_param(). So the host provided
table values may be overwritten by the initialization in
rndis_set_subchannel().
To prevent this problem, move the tx_table initialization before calling
rndis_filter_set_rss_param().
Fixes: a6fb6aa3cfa9 ("hv_netvsc: Set tx_table to equal weight after subchannels open") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Russell King [Tue, 10 Dec 2019 22:33:05 +0000 (22:33 +0000)]
net: marvell: mvpp2: phylink requires the link interrupt
phylink requires the MAC to report when its link status changes when
operating in inband modes. Failure to report link status changes
means that phylink has no idea when the link events happen, which
results in either the network interface's carrier remaining up or
remaining permanently down.
For example, with a fiber module, if the interface is brought up and
link is initially established, taking the link down at the far end
will cut the optical power. The SFP module's LOS asserts, we
deactivate the link, and the network interface reports no carrier.
When the far end is brought back up, the SFP module's LOS deasserts,
but the MAC may be slower to establish link. If this happens (which
in my tests is a certainty) then phylink never hears that the MAC
has established link with the far end, and the network interface is
stuck reporting no carrier. This means the interface is
non-functional.
Avoiding the link interrupt when we have phylink is basically not
an option, so remove the !port->phylink from the test.
Fixes: 4bb043262878 ("net: mvpp2: phylink support") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Eric Dumazet [Thu, 12 Dec 2019 20:55:31 +0000 (12:55 -0800)]
tcp: refine rule to allow EPOLLOUT generation under mem pressure
At the time commit ce5ec440994b ("tcp: ensure epoll edge trigger
wakeup when write queue is empty") was added to the kernel,
we still had a single write queue, combining rtx and write queues.
Once we moved the rtx queue into a separate rb-tree, testing
if sk_write_queue is empty has been suboptimal.
Indeed, if we have packets in the rtx queue, we probably want
to delay the EPOLLOUT generation at the time incoming packets
will free them, making room, but more importantly avoiding
flooding application with EPOLLOUT events.
Solution is to use tcp_rtx_and_write_queues_empty() helper.
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Due to how tcp_sendmsg() is implemented, we can have an empty
skb at the tail of the write queue.
Most [1] tcp_write_queue_empty() callers want to know if there is
anything to send (payload and/or FIN)
Instead of checking if the sk_write_queue is empty, we need
to test if tp->write_seq == tp->snd_nxt
[1] tcp_send_fin() was the only caller that expected to
see if an skb was in the write queue, I have changed the code
to reuse the tcp_write_queue_tail() result.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Eric Dumazet [Thu, 12 Dec 2019 20:55:29 +0000 (12:55 -0800)]
tcp: do not send empty skb from tcp_write_xmit()
Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from
write queue in error cases") in linux-4.14 stable triggered
various bugs. One of them has been fixed in commit ba2ddb43f270
("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but
we still have crashes in some occasions.
Root-cause is that when tcp_sendmsg() has allocated a fresh
skb and could not append a fragment before being blocked
in sk_stream_wait_memory(), tcp_write_xmit() might be called
and decide to send this fresh and empty skb.
Sending an empty packet is not only silly, it might have caused
many issues we had in the past with tp->packets_out being
out of sync.
Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Jason Baron <jbaron@akamai.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Eric Dumazet [Sat, 14 Dec 2019 02:20:41 +0000 (18:20 -0800)]
tcp/dccp: fix possible race __inet_lookup_established()
Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().
Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.
They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.
Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.
Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Firo Yang <firo.yang@suse.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/ Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Thomas Falcon [Wed, 11 Dec 2019 15:38:39 +0000 (09:38 -0600)]
net/ibmvnic: Fix typo in retry check
This conditional is missing a bang, with the intent
being to break when the retry count reaches zero.
Fixes: 476d96ca9cc5 ("ibmvnic: Bound waits for device queries") Suggested-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Hangbin Liu [Wed, 11 Dec 2019 14:20:16 +0000 (22:20 +0800)]
ipv6/addrconf: only check invalid header values when NETLINK_F_STRICT_CHK is set
In commit 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for
doit handlers") we add strict check for inet6_rtm_getaddr(). But we did
the invalid header values check before checking if NETLINK_F_STRICT_CHK
is set. This may break backwards compatibility if user already set the
ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code.
I didn't move the nlmsg_len check because I thought it's a valid check.
Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for doit handlers") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Arnd Bergmann [Tue, 10 Dec 2019 19:56:34 +0000 (20:56 +0100)]
ptp: clockmatrix: add I2C dependency
Without I2C, we get a link failure:
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3':
ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init':
ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit':
ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver'
Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jonathan Lemon [Tue, 10 Dec 2019 16:39:46 +0000 (08:39 -0800)]
bnxt: apply computed clamp value for coalece parameter
After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes
unresponsive, likely due to interrupt livelock. It appears that
a minimum clamp value for the irq timer is computed, but is never
applied.
Fix by applying the corrected clamp value.
Fixes: 74706afa712d ("bnxt_en: Update interrupt coalescing logic.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Instead of just having an airtime flag in debugfs, turn AQL into a proper
NL80211_EXT_FEATURE, so drivers can turn it on when they are ready, and so
we also expose the presence of the feature to userspace.
This also has the effect of flipping the default, so drivers have to opt in
to using AQL instead of getting it by default with TXQs. To keep
functionality the same as pre-patch, we set this feature for ath10k (which
is where it is needed the most).
While we're at it, split out the debugfs interface so AQL gets its own
per-station debugfs file instead of using the 'airtime' file.
[Johannes:]
This effectively disables AQL for iwlwifi, where it fixes a number of
issues:
* TSO in iwlwifi is causing underflows and associated warnings in AQL
* HE (802.11ax) rates aren't reported properly so at HE rates, AQL could
never have a valid estimate (it'd use 6 Mbps instead of up to 2400!)
Dan Carpenter [Tue, 26 Nov 2019 12:09:39 +0000 (15:09 +0300)]
mac80211: airtime: Fix an off by one in ieee80211_calc_rx_airtime()
This code was copied from mt76 and inherited an off by one bug from
there. The > should be >= so that we don't read one element beyond
the end of the array.
Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76") Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191126120910.ftr4t7me3by32aiz@kili.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stefan Bühler [Tue, 26 Nov 2019 10:05:44 +0000 (11:05 +0100)]
cfg80211: fix double-free after changing network namespace
If wdev->wext.keys was initialized it didn't get reset to NULL on
unregister (and it doesn't get set in cfg80211_init_wdev either), but
wdev is reused if unregister was triggered through
cfg80211_switch_netns.
The next unregister (for whatever reason) will try to free
wdev->wext.keys again.
Fredrik Olofsson [Tue, 19 Nov 2019 13:34:51 +0000 (14:34 +0100)]
mac80211: fix TID field in monitor mode transmit
Fix overwriting of the qos_ctrl.tid field for encrypted frames injected on
a monitor interface. While qos_ctrl.tid is not encrypted, it's used as an
input into the encryption algorithm so it's protected, and thus cannot be
modified after encryption. For injected frames, the encryption may already
have been done in userspace, so we cannot change any fields.
Before passing the frame to the driver, the qos_ctrl.tid field is updated
from skb->priority. Prior to dbd50a851c50 skb->priority was updated in
ieee80211_select_queue_80211(), but this function is no longer always
called.
Update skb->priority in ieee80211_monitor_start_xmit() so that the value
is stored, and when later code 'modifies' the TID it really sets it to
the same value as before, preserving the encryption.
Fixes: dbd50a851c50 ("mac80211: only allocate one queue when using iTXQs") Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> Link: https://lore.kernel.org/r/20191119133451.14711-1-fredrik.olofsson@anyfinetworks.com
[rewrite commit message based on our discussion] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Manish Chopra [Thu, 12 Dec 2019 14:49:28 +0000 (06:49 -0800)]
qede: Fix multicast mac configuration
Driver doesn't accommodate the configuration for max number
of multicast mac addresses, in such particular case it leaves
the device with improper/invalid multicast configuration state,
causing connectivity issues (in lacp bonding like scenarios).
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lan78xx driver accesses the PHY registers through MDIO bus over USB
connection. When performing a suspend/resume, the PHY registers can be
accessed before the USB connection is resumed. This will generate an
error and will prevent the device to resume correctly.
This patch adds the dependency between the MDIO bus and USB device to
allow correct handling of suspend/resume.
Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel T. Lee [Thu, 5 Dec 2019 08:01:14 +0000 (17:01 +0900)]
samples: bpf: fix syscall_tp due to unused syscall
Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.
This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.
Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel T. Lee [Thu, 5 Dec 2019 08:01:13 +0000 (17:01 +0900)]
samples: bpf: Replace symbol compare of trace_event
Previously, when this sample is added, commit 1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.
This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.
bpf: Make BPF trampoline use register_ftrace_direct() API
Make BPF trampoline attach its generated assembly code to kernel functions via
register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF
trampoline on the same kernel function. It also switches attaching logic from
arch specific text_poke to generic ftrace that is available on many
architectures. text_poke is still necessary for bpf-to-bpf attach and for
bpf_tail_call optimization.
bpftool: Don't crash on missing jited insns or ksyms
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Paul Chaignon [Mon, 9 Dec 2019 18:52:52 +0000 (19:52 +0100)]
bpf, mips: Limit to 33 tail calls
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.
Paul Chaignon [Mon, 9 Dec 2019 18:52:07 +0000 (19:52 +0100)]
bpf, riscv: Limit to 33 tail calls
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls. I tested it using the above selftest on an emulated
RISCV64.
Netanel Belgazal [Tue, 10 Dec 2019 11:27:44 +0000 (11:27 +0000)]
net: ena: fix napi handler misbehavior when the napi budget is zero
In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.
The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.
In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 10 Dec 2019 08:21:05 +0000 (15:21 +0700)]
tipc: fix use-after-free in tipc_disc_rcv()
In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called
to read the header data field but after the message skb has been freed,
that might result in a garbage value...
This commit fixes it by defining a new local variable to store the data
first, just like the other header fields' handling.
Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 10 Dec 2019 08:21:04 +0000 (15:21 +0700)]
tipc: fix retrans failure due to wrong destination
When a user message is sent, TIPC will check if the socket has faced a
congestion at link layer. If that happens, it will make a sleep to wait
for the congestion to disappear. This leaves a gap for other users to
take over the socket (e.g. multi threads) since the socket is released
as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free
to send messages to various destinations (e.g. via 'sendto()'), then
the socket's preformatted header has to be updated correspondingly
prior to the actual payload message building.
Unfortunately, the latter action is done before the first action which
causes a condition issue that the destination of a certain message can
be modified incorrectly in the middle, leading to wrong destination
when that message is built. Consequently, when the message is sent to
the link layer, it gets stuck there forever because the peer node will
simply reject it. After a number of retransmission attempts, the link
is eventually taken down and the retransmission failure is reported.
This commit fixes the problem by rearranging the order of actions to
prevent the race condition from occurring, so the message building is
'atomic' and its header will not be modified by anyone.
Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 10 Dec 2019 08:21:03 +0000 (15:21 +0700)]
tipc: fix potential hanging after b/rcast changing
In commit c55c8edafa91 ("tipc: smooth change between replicast and
broadcast"), we allow instant switching between replicast and broadcast
by sending a dummy 'SYN' packet on the last used link to synchronize
packets on the links. The 'SYN' message is an object of link congestion
also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent
back to the socket...
However, in that commit, we simply use the same socket 'cong_link_cnt'
counter for both the 'SYN' & normal payload message sending. Therefore,
if both the replicast & broadcast links are congested, the counter will
be not updated correctly but overwritten by the latter congestion.
Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is
reduced one by one and eventually overflowed. Consequently, further
activities on the socket will only wait for the false congestion signal
to disappear but never been met.
Because sending the 'SYN' message is vital for the mechanism, it should
be done anyway. This commit fixes the issue by marking the message with
an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a
link congestion, there is no need to touch the socket 'cong_link_cnt'
either. In addition, in the event of any error (e.g. -ENOBUFS), we will
purge the entire payload message queue and make a return immediately.
Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Tue, 10 Dec 2019 08:21:02 +0000 (15:21 +0700)]
tipc: fix name table rbtree issues
The current rbtree for service ranges in the name table is built based
on the 'lower' & 'upper' range values resulting in a flaw in the rbtree
searching. Some issues have been observed in case of range overlapping:
Case #1: unable to withdraw a name entry:
After some name services are bound, all of them are withdrawn by user
but one remains in the name table forever. This corrupts the table and
that service becomes dummy i.e. no real port.
E.g.
The node {10, 30} cannot be removed since the rbtree searching stops at
the node's ancestor i.e. {10, 50}, so starting from it will never reach
the finding node.
Case #2: failed to send data in some cases:
E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for
this service will be one of the two cases below depending on the order
of the bindings:
Now, try to send some data to service {30}, there will be two results:
(a): Failed, no route to host.
(b): Ok.
The reason is that the rbtree searching will stop at the pointing node
as shown above.
Case #3: Same as case #2b above but if the data sending's scope is
local and the {10, 50} is published by a peer node, then it will result
in 'no route to host' even though the other {20, 60} is for example on
the local node which should be able to get the data.
The issues are actually due to the way we built the rbtree. This commit
fixes it by introducing an additional field to each node - named 'max',
which is the largest 'upper' of that node subtree. The 'max' value for
each subtrees will be propagated correctly whenever a node is inserted/
removed or the tree is rebalanced by the augmented rbtree callbacks.
By this way, we can change the rbtree searching appoarch to solve the
issues above. Another benefit from this is that we can now improve the
searching for a next range matching e.g. in case of multicast, so get
rid of the unneeded looping over all nodes in the tree.
Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series contains fixes mostly for the error recovery feature
and related areas. Please queue the series for -stable also. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:13 +0000 (02:49 -0500)]
bnxt_en: Add missing devlink health reporters for VFs.
The VF driver also needs to create the health reporters since
VFs are also involved in firmware reset and recovery. Modify
bnxt_dl_register() and bnxt_dl_unregister() so that they can
be called by the VFs to register/unregister devlink. Only the PF
will register the devlink parameters. With devlink registered,
we can now create the health reporters on the VFs.
Fixes: 6763c779c2d8 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:12 +0000 (02:49 -0500)]
bnxt_en: Fix the logic that creates the health reporters.
Fix the logic to properly check the fw capabilities and create the
devlink health reporters only when needed. The current code creates
the reporters unconditionally as long as bp->fw_health is valid, and
that's not correct.
Call bnxt_dl_fw_reporters_create() directly from the init and reset
code path instead of from bnxt_dl_register(). This allows the
reporters to be adjusted when capabilities change. The same
applies to bnxt_dl_fw_reporters_destroy().
Fixes: 6763c779c2d8 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:11 +0000 (02:49 -0500)]
bnxt_en: Remove unnecessary NULL checks for fw_health
After fixing the allocation of bp->fw_health in the previous patch,
the driver will not go through the fw reset and recovery code paths
if bp->fw_health allocation fails. So we can now remove the
unnecessary NULL checks.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:10 +0000 (02:49 -0500)]
bnxt_en: Fix bp->fw_health allocation and free logic.
bp->fw_health needs to be allocated for either the firmware initiated
reset feature or the driver initiated error recovery feature. The
current code is not allocating bp->fw_health for all the necessary cases.
This patch corrects the logic to allocate bp->fw_health correctly when
needed. If allocation fails, we clear the feature flags.
We also add the the missing kfree(bp->fw_health) when the driver is
unloaded. If we get an async reset message from the firmware, we also
need to make sure that we have a valid bp->fw_health before proceeding.
Fixes: 07f83d72d238 ("bnxt_en: Discover firmware error recovery capabilities.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:09 +0000 (02:49 -0500)]
bnxt_en: Return error if FW returns more data than dump length
If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.
Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 10 Dec 2019 07:49:08 +0000 (02:49 -0500)]
bnxt_en: Free context memory in the open path if firmware has been reset.
This will trigger new context memory to be rediscovered and allocated
during the re-probe process after a firmware reset. Without this, the
newly reset firmware does not have valid context memory and the driver
will eventually fail to allocate some resources.
Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 10 Dec 2019 07:49:07 +0000 (02:49 -0500)]
bnxt_en: Fix MSIX request logic for RDMA driver.
The logic needs to check both bp->total_irqs and the reserved IRQs in
hw_resc->resv_irqs if applicable and see if both are enough to cover
the L2 and RDMA requested vectors. The current code is only checking
bp->total_irqs and can fail in some code paths, such as the TX timeout
code path with the RDMA driver requesting vectors after recovery. In
this code path, we have not reserved enough MSIX resources for the
RDMA driver yet.
Fixes: 75720e6323a1 ("bnxt_en: Keep track of reserved IRQs.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Luca Coelho [Thu, 5 Dec 2019 07:03:54 +0000 (09:03 +0200)]
iwlwifi: pcie: move power gating workaround earlier in the flow
We need to reset the NIC after setting the bits to enable power
gating and that cannot be done too late in the flow otherwise it
cleans other registers and things that were already configured,
causing initialization to fail.
In order to fix this, move the function to the common code in trans.c
so it can be called directly from there at an earlier point, just
after the reset we already do during initialization.
Fixes: 9a47cb988338 ("iwlwifi: pcie: add workaround for power gating in integrated 22000")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205719 Cc: stable@ver.kernel.org # 5.4+ Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4
attempted to fix the same bug (dead assignments to the local variable
cfg), but they did so in incompatible ways. When they were both merged,
independently of each other, the combination actually caused the bug to
reappear, leading to a firmware crash on boot for some cards.
Stephan Gerhold [Mon, 9 Dec 2019 18:53:43 +0000 (19:53 +0100)]
NFC: nxp-nci: Fix probing without ACPI
devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI
is disabled (e.g. on device tree platforms).
In this case, nxp-nci will silently fail to probe.
The other NFC drivers only log a debug message if
devm_acpi_dev_add_driver_gpios() fails.
Do the same in nxp-nci to fix this problem.
Fixes: ad0acfd69add ("NFC: nxp-nci: Get rid of code duplication in ->probe()") Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
fix it replacing the latest duplicate id with a brand new one:
[root@fedora tc-testing]# sed -i 's/6f5e//1' tc-tests/filters/basic.json
[root@fedora tc-testing]# ./tdc.py -i
Fixes: 4717b05328ba ("tc-testing: Introduced tdc tests for basic filter") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Mon, 9 Dec 2019 13:31:25 +0000 (21:31 +0800)]
af_packet: set defaule value for tmo
There is softlockup when using TPACKET_V3:
...
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms!
(__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
(_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c)
(mod_timer) from [<c0549c30>]
(prb_retire_rx_blk_timer_expired+0x68/0x11c)
(prb_retire_rx_blk_timer_expired) from [<c027a7ac>]
(call_timer_fn+0x90/0x17c)
(call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc)
(run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318)
(__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
(irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
(msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4)
(handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118)
(gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c)
...
If __ethtool_get_link_ksettings() is failed in
prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies
is zero and the timer expire for retire_blk_timer is turn to
mod_timer(&pkc->retire_blk_timer, jiffies + 0),
which will trigger cpu usage of softirq is 100%.
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size"
The TI CPSW(s) driver produces warning with DMA API debug options enabled:
WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size
[device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14)
[<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110)
[<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c)
[<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968)
[<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4)
[<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598)
[<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74)
[<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c)
[<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364)
[<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24)
[<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100)
[<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...
The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.
Hence, fix an issue by passing correct buffer length in CPDMA descriptor.
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_flow_table_offload: Correct memcpy size for flow_overload_mangle()
In function 'memcpy',
inlined from 'flow_offload_mangle' at net/netfilter/nf_flow_table_offload.c:112:2,
inlined from 'flow_offload_port_dnat' at net/netfilter/nf_flow_table_offload.c:373:2,
inlined from 'nf_flow_rule_route_ipv4' at net/netfilter/nf_flow_table_offload.c:424:3:
./include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
376 | __read_overflow2();
| ^~~~~~~~~~~~~~~~~~
The original u8* was done in the hope to make this more adaptable but
consensus is to keep this like it is in tc pedit.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Martin Schiller [Mon, 9 Dec 2019 07:21:34 +0000 (08:21 +0100)]
net/x25: add new state X25_STATE_5
This is needed, because if the flag X25_ACCPT_APPRV_FLAG is not set on a
socket (manual call confirmation) and the channel is cleared by remote
before the manual call confirmation was sent, this situation needs to
be handled.
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 9 Dec 2019 06:56:34 +0000 (08:56 +0200)]
selftests: forwarding: Delete IPv6 address at the end
When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:
$ ./router_bridge_vlan.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
Fix this by deleting the address during cleanup.
Fixes: 5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In case the driver vetoes the addition of an IPv6 multipath route, the
IPv6 stack will emit delete notifications for the sibling routes that
were already added to the FIB trie. Since these siblings are not present
in hardware, a warning will be generated.
Have the driver ignore notifications for routes it does not have.
Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize
the padding of addr->v4.
Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr)
will become the part of skb, and the issue occurs.
This patch is to fix it by initializing the padding of addr->v4 in
sctp_v4_from_addr_param(), as well as other functions that do the similar
thing, and these functions shouldn't trust that the caller initializes the
memory, as Marcelo suggested.
Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log