staging:iio:adis16400 replace unnecessary event line registration.

Whilst the adis16400 does indeed support events, currently the driver
does not.  The trigger code should never use that infrastructure.

Tested indirectly via the IMU driver merge to follow.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adis16350 replace unnecessary event line registration.

Whilst the adis163500 does indeed support events, currently the driver
does not.  The trigger code should never use that infrastructure.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adis16300 replace unnecessary event line registration.

Whilst the adis16300 does indeed support events, currently the driver
does not.  The trigger code should never use that infrastructure.

Tested indirectly via the IMU driver merge to follow.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:light:tsl2563 constify gain level table.

Trivial cleanup.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:tsl2563 take advantage of new iio_device_allocate private data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:documentation make read_size signed to allow for errors.

Without this all hell breaks loose if you have no data.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:max1363 take advantage of new iio_device_allocate private data.

The only fiddly bit in here was ensuring the regulator was available until after
the free had occured.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc: max1363 dev_info -> indio_dev in naming for consistency

Either name is fine, so went with the most common.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:max1363 fix timestamp handling.

Not only was this not compliant with the abi, it was also missconfiguring
the buffer.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: Add ability to allocate private data space to iio_allocate_device

Suggested by Arnd Bergmann.  Note this will break ALL drivers that
are out of mainline.  The fix is trivial change of
iio_allocate_device() -> iio_allocate_device(0)
Sorry if this causes issues for any one!

V2: Include new drivers in the update

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: replace rip_lots naming with read_first_n

Change suggested by Arnd Bergmann, Related patch to remove
pointless (now) dead_offset parameter will have await
proper fix for the sca3000 driver.  That depends on
some intermediate patches so may be a little while.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: iio_trigger_unregister - remove rather strange search for what we already have.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:trigger remove export of iio_trigger_find_by_name, use sysfs_streq for matching

Trivial reorganization.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: IIO: DAC: AD5446 add support for AD5541A devices

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: TAOS tsl258x: Device driver

Added suspend/resume functions.
Changed attribute names to match existing where applicable and updated
or documented new ABI as discussed.
Changed integration time ABI from using index (0 to 3) to use actual
gain values (1x,8x, etc.).
Removed various unused variables, declarations, and functions.
Revised code to accommodate different endianess (le16_to_cpu).
Updated error return codes in various functions.
Changed from mdelay to msleep after determining that longer wait would
be acceptable.

V5: Makefile and Kconfig cleanups by Jonathan Cameron.

Signed-off-by: Jon August Brenner <jbrenner@taosinc.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: IIO: DAC: New driver for AD5791/AD5781 High Resolution Voltage Output DACs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: allow non stolen page backed framebuffer

For Moorestown at least we may not have stolen RAM with which to back the
initial framebuffer. Allow a GEM backing.

At this point we should have all the bits in place needed to make it work once
it has been debugged.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: prune some unused variables

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: GEM - now we have the basics we shall stick pins in it

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: GEMify the frame buffer base bits

This then kills off the old bo_ interfaces

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Begin the GEMification of the cursor code

Do a first pass over the cursor code and rework it to use GEM objects for
the cursor buffer as we need.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Add support for inserting and removing pages from the GART

There are two chunks of code we need to do this. The first one is the code
to insert and remove the pages from the GART, the second is the code to build
page table lists from the GEM object. Surprisingly this latter one doesn't seem
to have a nice GEM helper.

While we are at it we can begin dismantling the semi redundant struct pg,
and finish pruning out the old now unused gtt code as well as the last bits
of helper glue from the old driver base.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: begin adding GEM

This puts in place the infrastructure for GEM allocators. Our implementation
is fairly simplistic at this point and we don't deal with things like
evicting objects from the GART to make space, nor compaction.

We extent our gtt_range struct to include a GEM object and that allows GEM
to do all the handle management and most of the memory mapping work for us.

This patch also doesn't load GEM pages into the GART so the GEM side isn't
very useful. Before we can do that a fair bit of work is needed reworking the
internal GTT code.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: add the ability to request backed space or not

We will will need this for doing a GEM allocator. It should also avoid any
crashes with the current code if the stolen area is too small.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Tidy up the allocations

Now we can do allocations we need to shuffle the fb resource into the fb so
we can one day have multiple frame buffer objects.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Add a gtt allocator

At the moment we don't do any page backing for the GTT so only the stolen
area pages will actually work. That is fine for our initial framebuffer and
a bit of testing but will need resolution (including alternate mmap methods
and the like for s/g areas) eventually.

Rather than use some of the overcomplex stuff in the DRM we use the existing
Linux resource allocators to hand out framebuffers and the like. This also has
the nice result that /proc/iomem shows the allocations.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: backlight warning

The current bl code checks for backlight types and warns if they are not
properly set. Set ours to avoid the warning spew

(This one alone is probably 2.6.39 candidate)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: prepare to do some actual memory management

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: ioctl first pass

Go through the remaining ioctls and check they make sense

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix a typo

replace tranmitted with transmitted.

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: olpc_dcon: fix space and coding issues

Fix the whitespace and coding style issues in olpc_dcon metioned by
checkpatch.

Signed-off-by: Stefan Brähler <Stefan.Braehler@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: sep: resolve issue with false zero length of page

Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Remove unnecessary semicolons when switch (foo) {...};

Done via perl script:

$ cat remove_semi_switch.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces      = qr/(\{(?:[^\{\}]++|(?-1))*\})/;

foreach my $file (@ARGV) {
    my $f;
    my $text;
    my $oldtext;

    next if ((-d $file));

    open($f, '<', $file)
or die "$P: Can't open $file for read\n";
    $oldtext = do { local($/) ; <$f> };
    close($f);

    next if ($oldtext eq "");

    $text = $oldtext;

    my $count = 0;
    do {
$count = 0;
$count += $text =~ s@\b(switch\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
    } while ($count > 0);

    if ($text ne $oldtext) {
my $newfile = $file;

open($f, '>', $newfile)
    or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
    }
}

$

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Remove unnecessary semicolons when for (foo) {...};

Done via perl script:

$ cat remove_semi_for.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces      = qr/(\{(?:[^\{\}]++|(?-1))*\})/;

foreach my $file (@ARGV) {
    my $f;
    my $text;
    my $oldtext;

    next if ((-d $file));

    open($f, '<', $file)
or die "$P: Can't open $file for read\n";
    $oldtext = do { local($/) ; <$f> };
    close($f);

    next if ($oldtext eq "");

    $text = $oldtext;

    my $count = 0;
    do {
$count = 0;
$count += $text =~ s@\b(for\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
    } while ($count > 0);

    if ($text ne $oldtext) {
my $newfile = $file;

open($f, '>', $newfile)
    or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
    }
}

$

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Remove unnecessary semicolons when while (foo) {...};

Done via perl script:

$ cat remove_semi_while.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces      = qr/(\{(?:[^\{\}]++|(?-1))*\})/;

foreach my $file (@ARGV) {
    my $f;
    my $text;
    my $oldtext;

    next if ((-d $file));

    open($f, '<', $file)
or die "$P: Can't open $file for read\n";
    $oldtext = do { local($/) ; <$f> };
    close($f);

    next if ($oldtext eq "");

    $text = $oldtext;

    my $count = 0;
    do {
$count = 0;
$count += $text =~ s@\b(while\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
    } while ($count > 0);

    if ($text ne $oldtext) {
my $newfile = $file;

open($f, '>', $newfile)
    or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
    }
}

$

One false positive removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Remove unnecessary semicolons when if (foo) {...};

Done via perl script:

$ cat remove_semi_if.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces      = qr/(\{(?:[^\{\}]++|(?-1))*\})/;

foreach my $file (@ARGV) {
    my $f;
    my $text;
    my $oldtext;

    next if ((-d $file));

    open($f, '<', $file)
or die "$P: Can't open $file for read\n";
    $oldtext = do { local($/) ; <$f> };
    close($f);

    next if ($oldtext eq "");

    $text = $oldtext;

    my $count = 0;
    do {
$count = 0;
$count += $text =~ s@\b(if\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
    } while ($count > 0);

    if ($text ne $oldtext) {
my $newfile = $file;

open($f, '>', $newfile)
    or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
    }
}

$

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-staging into staging-next

* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-staging:
  staging: rt2860sta and rt2870sta: Remove drivers replaced in net/wireless

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: istallion: fix arbitrary kernel memory reads/writes

stli_brdstats is defined as global variable.  After de-BKL-ization in
the patch b4eda9cb48eac1b7 an access to the variable is not serialized
anymore.  This leads to the race window between the check and the use
in stli_getbrdstats():

        if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
                return -EFAULT;
        if (stli_brdstats.brd >= STL_MAXBRDS) <<<
                return -ENODEV;
        brdp = stli_brds[stli_brdstats.brd];  <<<

If one process calls COM_GETBRDSTATS ioctl() with sane .brd, second
process calls COM_GETBRDSTATS ioctl() with invalid .brd, and the
second process' copy_from_user() executes exactly between the check and
stli_brds[] indexation of the first process, then the first process gets
contents of memory at *stli_brds[stli_brdstats.brd] address.  Also
the resulting .nrpanels field may be too big, in this case
stli_brdstats.panels array overflows.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

modules: Enabled dynamic debugging for staging modules

Driver modules from the staging directory are marked 'tainted'
by module.c. Subsequently, tainted modules are denied dynamic
debugging. This is unwanted behavior, since staging modules should
be able to use the dynamic debugging mechanism.

Please merge this also into the staging-linus branch.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Add dhdsdio_chip_attach in dhd_sdio.c

dhdsdio_chip_attach and it sub functions are added for si/sb utils removal.
It will replace si_attach in following patches.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Add bcmchip.h

bcmchip.h contains chip specific core register base address and
address translation macro for core register access. This is
introduced for si/sb utils dependence removal in fullmac driver.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unnecessary include from nvram_ro.c

Source file included bcmotp.h but did not use any declared item
from that include file so it can safely be removed.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for div by zero in minstrel_ht_tx_status

Caused by brcmsmac.ko suppling a 0 value to Mac80211. Mac80211 subsequently
divides by this number. Bug only occurred on AMPDU traffic. This is a fix
for https://bugzilla.kernel.org/show_bug.cgi?id=32032, titled
'Divide error in minstrel_ht_tx_status followed by hang', reported by
Wouter Cloetens.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced BCME_OK by 0

Code cleanup.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused error codes

Code cleanup.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: update PCI config space define

- replaced sizeof(struct pci_config_regs) with exact size; removed
  struct
- cleaned up the rest of broadcom PCI specific defines

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: remove unused struct ppb_config_regs

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: use native PCI header defines

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: use native PCI capability defines

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: use native PCI register offsets

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: fix operations for power management

The cfg80211 ops for power management were completely
broken. If we were asked for to go into power save it was putting
device in awake, and when we were asked to become awake we were
putting the device into power save... This fixes the powersave
operations to do the right thing.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: fix scan operation while disconnect

If a scan operation is pending and in between a disconnect
event is received from firmware the scan results never get
sent back to cfg80211. This causes a scan failure and yields
a device/resource busy state upon retries. If a disconnect
event is received and scan is pending return the scan done
to the cfg80211 to enable futher scans to be issued.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: add the device ID on the data command packet

The firmware expects the device ID to be added on the
data and command packets sent to firmware for AR6003 v2.1.1.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: Extend WMI API used by AR6003 v2.1.1

These commands and event IDs are used by AR6003 v2.1.1.
Some events are no longer needed so these are removed now.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: add support for AR6003 v2.1.1

This adds support for AR6003 v2.1.1. Highlights changes
for this new hardware are:

1. Host interest area, through which driver communicates
   with FW has been enhanced to accomodate additional
   members for proper functioanlity of new HW.

2. The firmware and the board data files are different
   for AR6003 v2.1.1. The capability to read those file
   have been added in the driver.

3. Certain parameters like numdevice, firmware mode needs to be
   programmed for proper functionality of new driver.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:ath6kl:Correcting the typo

1) ATH6K_CONFIG_HIF_VIRTUAL_SCATTER needs to be
   ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER in file ar6000_drv.h

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of IDE details from blkvsc_drv.c

Now get rid of IDE details from blkvsc_drv.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Introduce a function to map channel properties onto block device info

In preparation for removing the IDE details from the block driver, implement
a function that maps channel properties to block device information.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fix a jump label (Remove) in blkvsc_drv.c

One of the jump labels was named Remove; change it to remove.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fix a jump label (Cleanup) in blkvsc_drv

One of the goto labels was named Cleanup; change it to cleanup.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup blkvsc_open()

Given that we don't support removable media, cleanup blkvsc_open().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of an unnecessary check in blkvsc_probe()

It is never the case that the dev_add function pointer will not be set
(we set it in this code!). Get rid of this meaningless check.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_ERR() calls

Get rid of some DPRINT_ERR() calls.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the code to manage removable media

The Hyper-V block driver does not handle removable media.
Get rid of the code to manage removable media.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup storvsc_remove()

storvsc_remove() cannot fail, clean it up accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup blkvsc_remove()

blkvsc_remove() cannot fail. Clean it up accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_DBG() calls

Get rid of some of the DPRINT_DBG() statements.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_INFO() statements

Get rid of some of the DPRINT_INFO() statements.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Simplify blkvsc_init_rw()

Simplyfify blkvsc_init_rw() by using a single scsi command independent of
the start sector.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the function blkvsc_revalidate_disk()

The block driver in Hyper-V does not support removable media, get rid of the
blkvsc_revalidate_disk().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the state media_not_present

The block driver in Hyper-V does not handle removable media, get rid of the
media_not_present state.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the function blkvsc_do_flush()

Get rid of the function blkvsc_do_flush() and instead use the common function
to force a device flush.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of blkvsc_do_read_capacity16()

Get rid of blkvsc_do_read_capacity16() and instead use the common function
for retrieving capacity.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of blkvsc_do_read_capacity()

Now that we have a common function for some of the operations on the device,
use that and get rid of the function blkvsc_do_read_capacity().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Introduce a common function for issuing commands to the device

There are multiple functions to either get info about the device
(INQUIRY, CAPACITY etc) or to FLUSH the device cache. The majority of the
code for these functions is identical. Introduce a common function for
doing all these operations.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Simplify the code for blkvsc_getgeo()

We are making up the geometry anyway, keep it simple.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Enable blkvsc_ioctl()

We can support HDIO_GET_IDENTITY ioctl, enable blkvsc_ioctl().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some dead code in blkvsc_drv.c

Get rid of some dead code in blkvsc_drv.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Move module parameter to earlier in the file

Move module parameter to be earlier in the file.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Move some definitions/declarations to be earlier in the file

Move some definitions/declarations to be earlier in the file.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_request()

Get rid of the forward declaration for blkvsc_request() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_pending_reqs()

Get rid of the forward declaration for blkvsc_do_pending_reqs() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_request()

Get rid of the forward declaration for blkvsc_do_request() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_inquiry()

Get rid of the forward declaration for blkvsc_do_inquiry() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_revalidate_disk()

Get rid of the forward declaration of blkvsc_revalidate_disk() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_do_read_capacity16()

Get rid of the forward declaration of blkvsc_do_read_capacity16() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_read_capacity()

Get rid of the forward declaration for blkvsc_do_read_capacity() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_release()

Get rid of the forward declaration for blkvsc_release() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_shutdown()

Get rid of the forward declaration of blkvsc_shutdown() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_remove()

Get rid of the forward declaration of blkvsc_remove() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_cancel_pending_reqs()

Get rid of the forward declaration of blkvsc_cancel_pending_reqs() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_do_flush()

Get rid of the forward declaration of blkvsc_do_flush() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_cmd_completion()

Get rid of the forward declaration of blkvsc_cmd_completion() by moving the
code  around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_ioctl()

Get rid of the forward declaration of blkvsc_ioctl() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_init_rw()

Get rid of the forward declaration of blkvsc_init_rw() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: convert function name NetVscDisconnectFromVsp to lower case

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: clean up unused forward declarations

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_device_add() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_destroy_send_buf() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_destroy_recv_buf() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>